1 files changed, 0 insertions, 96 deletions

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c722299..000000000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
-        {
-                .name = "u-boot",
-                .offset = 0,
-                .size = SZ_1M
-        }, {
-                .name = "uImage",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = SZ_4M
-        }, {
-                .name = "root",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = MTDPART_SIZ_FULL
-        },
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
-        .n_ports        = 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
-        .gpio_card_detect = 29, /* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
-        MPP29_GPIO,
-        0
-};
-
-static void __init openrd_base_init(void)
-{
-        /*
-         * Basic setup. Needs to be called early.
-         */
-        kirkwood_init();
-        kirkwood_mpp_conf(openrd_base_mpp_config);
-
-        kirkwood_uart0_init();
-        kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
-        kirkwood_ehci_init();
-
-        kirkwood_ge00_init(&openrd_base_ge00_data);
-        kirkwood_sata_init(&openrd_base_sata_data);
-        kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
-        kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
-        if (machine_is_openrd_base())
-                kirkwood_pcie_init();
-
-        return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
-        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
-        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-        .boot_params    = 0x00000100,
-        .init_machine   = openrd_base_init,
-        .map_io         = kirkwood_map_io,
-        .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
-MACHINE_END