1 files changed, 87 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
new file mode 100644
index 000000000000..00b79eaeef53
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -0,0 +1,87 @@
+/*
+ *
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the board file ts219-setup.c:
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+        .n_ports        = 2,
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+        MPP0_SPI_SCn,
+        MPP1_SPI_MOSI,
+        MPP2_SPI_SCK,
+        MPP3_SPI_MISO,
+        MPP4_SATA1_ACTn,
+        MPP5_SATA0_ACTn,
+        MPP8_TW0_SDA,
+        MPP9_TW0_SCK,
+        MPP10_UART0_TXD,
+        MPP11_UART0_RXD,
+        MPP13_UART1_TXD,        /* PIC controller */
+        MPP14_UART1_RXD,        /* PIC controller */
+        MPP15_GPIO,             /* USB Copy button (on devices with 88F6281) */
+        MPP16_GPIO,             /* Reset button (on devices with 88F6281) */
+        MPP36_GPIO,             /* RAM: 0: 256 MB, 1: 512 MB */
+        MPP37_GPIO,             /* Reset button (on devices with 88F6282) */
+        MPP43_GPIO,             /* USB Copy button (on devices with 88F6282) */
+        MPP44_GPIO,             /* Board ID: 0: TS-11x, 1: TS-21x */
+        0
+};
+
+void __init qnap_dt_ts219_init(void)
+{
+        u32 dev, rev;
+
+        kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+        kirkwood_pcie_id(&dev, &rev);
+        if (dev == MV88F6282_DEV_ID)
+                qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+
+        kirkwood_ge00_init(&qnap_ts219_ge00_data);
+        kirkwood_sata_init(&qnap_ts219_sata_data);
+        kirkwood_ehci_init();
+
+        pm_power_off = qnap_tsx1x_power_off;
+}
+
+/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */
+static int __init ts219_pci_init(void)
+{
+        if (machine_is_ts219())
+                kirkwood_pcie_init(KW_PCIE0);
+
+        return 0;
+}
+subsys_initcall(ts219_pci_init);