1 files changed, 86 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
new file mode 100644
index 000000000000..8821720ab5a4
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * arch/arm/mach-kirkwood/board-ns2.c
+ *
+ * LaCie Network Space v2 board (and parents) initialization for drivers
+ * not converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data ns2_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int ns2_mpp_config[] __initdata = {
+        MPP0_SPI_SCn,
+        MPP1_SPI_MOSI,
+        MPP2_SPI_SCK,
+        MPP3_SPI_MISO,
+        MPP4_NF_IO6,
+        MPP5_NF_IO7,
+        MPP6_SYSRST_OUTn,
+        MPP7_GPO,               /* Fan speed (bit 1) */
+        MPP8_TW0_SDA,
+        MPP9_TW0_SCK,
+        MPP10_UART0_TXD,
+        MPP11_UART0_RXD,
+        MPP12_GPO,              /* Red led */
+        MPP14_GPIO,             /* USB fuse */
+        MPP16_GPIO,             /* SATA 0 power */
+        MPP17_GPIO,             /* SATA 1 power */
+        MPP18_NF_IO0,
+        MPP19_NF_IO1,
+        MPP20_SATA1_ACTn,
+        MPP21_SATA0_ACTn,
+        MPP22_GPIO,             /* Fan speed (bit 0) */
+        MPP23_GPIO,             /* Fan power */
+        MPP24_GPIO,             /* USB mode select */
+        MPP25_GPIO,             /* Fan rotation fail */
+        MPP26_GPIO,             /* USB device vbus */
+        MPP28_GPIO,             /* USB enable host vbus */
+        MPP29_GPIO,             /* Blue led (slow register) */
+        MPP30_GPIO,             /* Blue led (command register) */
+        MPP31_GPIO,             /* Board power off */
+        MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
+        MPP33_GPO,              /* Fan speed (bit 2) */
+        0
+};
+
+#define NS2_GPIO_POWER_OFF      31
+
+static void ns2_power_off(void)
+{
+        gpio_set_value(NS2_GPIO_POWER_OFF, 1);
+}
+
+void __init ns2_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(ns2_mpp_config);
+
+        if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+            of_machine_is_compatible("lacie,netspace_mini_v2"))
+                ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+        kirkwood_ge00_init(&ns2_ge00_data);
+
+        if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 &&
+            gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0)
+                pm_power_off = ns2_power_off;
+        else
+                pr_err("ns2: failed to configure power-off GPIO\n");
+}