1 files changed, 0 insertions, 38 deletions

diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720ab5a4..f4632a809f68 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
         .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ns2_mpp_config[] __initdata = {
-        MPP0_SPI_SCn,
-        MPP1_SPI_MOSI,
-        MPP2_SPI_SCK,
-        MPP3_SPI_MISO,
-        MPP4_NF_IO6,
-        MPP5_NF_IO7,
-        MPP6_SYSRST_OUTn,
-        MPP7_GPO,               /* Fan speed (bit 1) */
-        MPP8_TW0_SDA,
-        MPP9_TW0_SCK,
-        MPP10_UART0_TXD,
-        MPP11_UART0_RXD,
-        MPP12_GPO,              /* Red led */
-        MPP14_GPIO,             /* USB fuse */
-        MPP16_GPIO,             /* SATA 0 power */
-        MPP17_GPIO,             /* SATA 1 power */
-        MPP18_NF_IO0,
-        MPP19_NF_IO1,
-        MPP20_SATA1_ACTn,
-        MPP21_SATA0_ACTn,
-        MPP22_GPIO,             /* Fan speed (bit 0) */
-        MPP23_GPIO,             /* Fan power */
-        MPP24_GPIO,             /* USB mode select */
-        MPP25_GPIO,             /* Fan rotation fail */
-        MPP26_GPIO,             /* USB device vbus */
-        MPP28_GPIO,             /* USB enable host vbus */
-        MPP29_GPIO,             /* Blue led (slow register) */
-        MPP30_GPIO,             /* Blue led (command register) */
-        MPP31_GPIO,             /* Board power off */
-        MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
-        MPP33_GPO,              /* Fan speed (bit 2) */
-        0
-};
-
 #define NS2_GPIO_POWER_OFF      31
 
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
         /*
          * Basic setup. Needs to be called early.
          */
-        kirkwood_mpp_conf(ns2_mpp_config);
-
         if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
             of_machine_is_compatible("lacie,netspace_mini_v2"))
                 ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);