1 files changed, 0 insertions, 35 deletions

diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 6d3a56421142..9f6f496380d8 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,52 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
 #include <linux/input.h>
 #include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF   24
 
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
         .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ib62x0_mpp_config[] __initdata = {
-        MPP0_NF_IO2,
-        MPP1_NF_IO3,
-        MPP2_NF_IO4,
-        MPP3_NF_IO5,
-        MPP4_NF_IO6,
-        MPP5_NF_IO7,
-        MPP18_NF_IO0,
-        MPP19_NF_IO1,
-        MPP22_GPIO,     /* OS LED red */
-        MPP24_GPIO,     /* Power off device */
-        MPP25_GPIO,     /* OS LED green */
-        MPP27_GPIO,     /* USB transfer LED */
-        MPP28_GPIO,     /* Reset button */
-        MPP29_GPIO,     /* USB Copy button */
-        0
-};
-
-static void ib62x0_power_off(void)
-{
-        gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
 void __init ib62x0_init(void)
 {
         /*
          * Basic setup. Needs to be called early.
          */
-        kirkwood_mpp_conf(ib62x0_mpp_config);
-
-        kirkwood_ehci_init();
         kirkwood_ge00_init(&ib62x0_ge00_data);
-        if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
-            gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
-                pm_power_off = ib62x0_power_off;
-        else
-                pr_err("board-ib62x0: failed to configure power-off GPIO\n");
 }