2 files changed, 74 insertions, 15 deletions

diff --git a/arch/arm/mach-ixp4xx/nas100d-power.c b/arch/arm/mach-ixp4xx/nas100d-power.c
index 29aa98d3a7fa..4c1c01bb3fe2 100644
--- a/arch/arm/mach-ixp4xx/nas100d-power.c
+++ b/arch/arm/mach-ixp4xx/nas100d-power.c
@@ -21,15 +21,59 @@
 #include <linux/irq.h>
 #include <linux/module.h>
 #include <linux/reboot.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 
+#include <asm/gpio.h>
 #include <asm/mach-types.h>
 
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void nas100d_power_handler(unsigned long data);
+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
+
+static void nas100d_power_handler(unsigned long data)
 {
-        /* Signal init to do the ctrlaltdel action, this will bypass init if
-         * it hasn't started and do a kernel_restart.
+        /* This routine is called twice per second to check the
+         * state of the power button.
          */
-        ctrl_alt_del();
+
+        if (gpio_get_value(NAS100D_PB_GPIO)) {
+
+                /* IO Pin is 1 (button pushed) */
+                if (power_button_countdown > 0)
+                        power_button_countdown--;
+
+        } else {
+
+                /* Done on button release, to allow for auto-power-on mods. */
+                if (power_button_countdown == 0) {
+                        /* Signal init to do the ctrlaltdel action,
+                         * this will bypass init if it hasn't started
+                         * and do a kernel_restart.
+                         */
+                        ctrl_alt_del();
+
+                        /* Change the state of the power LED to "blink" */
+                        gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+                } else {
+                        power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+                }
+        }
+
+        mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+{
+        /* This is the paper-clip reset, it shuts the machine down directly. */
+        machine_power_off();
 
         return IRQ_HANDLED;
 }
@@ -39,17 +83,30 @@ static int __init nas100d_power_init(void)
         if (!(machine_is_nas100d()))
                 return 0;
 
-        set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
+        set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
 
-        if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
+        if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
                 IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
 
                 printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-                        NAS100D_RB_IRQ);
+                        gpio_to_irq(NAS100D_RB_GPIO));
 
                 return -EIO;
         }
 
+        /* The power button on the Iomega NAS100d is on GPIO 14, but
+         * it cannot handle interrupts on that GPIO line.  So we'll
+         * have to poll it with a kernel timer.
+         */
+
+        /* Make sure that the power button GPIO is set up as an input */
+        gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
+
+        /* Set the initial value for the power button IRQ handler */
+        power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+        mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
         return 0;
 }
 
@@ -58,7 +115,9 @@ static void __exit nas100d_power_exit(void)
         if (!(machine_is_nas100d()))
                 return;
 
-        free_irq(NAS100D_RB_IRQ, NULL);
+        del_timer_sync(&nas100d_power_timer);
+
+        free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
 }
 
 module_init(nas100d_power_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 54d884fb2517..213a4cea9117 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -43,20 +43,20 @@ static struct platform_device nas100d_flash = {
 static struct resource nas100d_led_resources[] = {
         {
                 .name           = "wlan",   /* green led */
-                .start          = 0,
-                .end            = 0,
+                .start          = NAS100D_LED_WLAN_GPIO,
+                .end            = NAS100D_LED_WLAN_GPIO,
                 .flags          = IXP4XX_GPIO_LOW,
         },
         {
-                .name           = "ready",  /* blue power led (off is flashing!) */
-                .start          = 15,
-                .end            = 15,
+                .name           = "power",  /* blue power led (off=flashing) */
+                .start          = NAS100D_LED_PWR_GPIO,
+                .end            = NAS100D_LED_PWR_GPIO,
                 .flags          = IXP4XX_GPIO_LOW,
         },
         {
                 .name           = "disk",   /* yellow led */
-                .start          = 3,
-                .end            = 3,
+                .start          = NAS100D_LED_DISK_GPIO,
+                .end            = NAS100D_LED_DISK_GPIO,
                 .flags          = IXP4XX_GPIO_LOW,
         },
 };