1 files changed, 317 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
new file mode 100644
index 000000000000..575ff1ae85a7
--- /dev/null
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* UART4 */
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+#endif
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* I2C1 */
+        PD17_PF_I2C_DATA,
+        PD18_PF_I2C_CLK,
+        /* SDHC2 */
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+        PB4_PF_SD2_D0,
+        PB5_PF_SD2_D1,
+        PB6_PF_SD2_D2,
+        PB7_PF_SD2_D3,
+        PB8_PF_SD2_CMD,
+        PB9_PF_SD2_CLK,
+#endif
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        /* Quad UART's IRQ */
+        GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+        /* OTG */
+        PC7_PF_USBOTG_DATA5,
+        PC8_PF_USBOTG_DATA6,
+        PC9_PF_USBOTG_DATA0,
+        PC10_PF_USBOTG_DATA2,
+        PC11_PF_USBOTG_DATA1,
+        PC12_PF_USBOTG_DATA4,
+        PC13_PF_USBOTG_DATA3,
+        PE0_PF_USBOTG_NXT,
+        PE1_PF_USBOTG_STP,
+        PE2_PF_USBOTG_DIR,
+        PE24_PF_USBOTG_CLK,
+        PE25_PF_USBOTG_DATA7,
+        /* USBH2 */
+        PA0_PF_USBH2_CLK,
+        PA1_PF_USBH2_DIR,
+        PA2_PF_USBH2_DATA7,
+        PA3_PF_USBH2_NXT,
+        PA4_PF_USBH2_STP,
+        PD19_AF_USBH2_DATA4,
+        PD20_AF_USBH2_DATA3,
+        PD21_AF_USBH2_DATA6,
+        PD22_AF_USBH2_DATA0,
+        PD23_AF_USBH2_DATA2,
+        PD24_AF_USBH2_DATA1,
+        PD26_AF_USBH2_DATA5,
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+        .width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+        .start = 0xc0000000,
+        .end   = 0xc3ffffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &eukrea_cpuimx27_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &eukrea_cpuimx27_nor_mtd_device,
+        &mxc_fec_device,
+        &mxc_wdt,
+        &mxc_w1_master_device,
+};
+
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
+        .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("pcf8563", 0x51),
+        },
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+        {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+                .irq = IRQ_GPIOB(23),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+                .irq = IRQ_GPIOB(22),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+                .irq = IRQ_GPIOB(27),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+                .irq = IRQ_GPIOB(30),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+        }
+};
+
+static struct platform_device serial_device = {
+        .name = "serial8250",
+        .id = 0,
+        .dev = {
+                .platform_data = serial_platform_data,
+        },
+};
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata = {
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx27_otg_mode(char *options)
+{
+        if (!strcmp(options, "host"))
+                otg_mode_host = 1;
+        else if (!strcmp(options, "device"))
+                otg_mode_host = 0;
+        else
+                pr_info("otg_mode neither \"host\" nor \"device\". "
+                        "Defaulting to device\n");
+        return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
+
+static void __init eukrea_cpuimx27_init(void)
+{
+        mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+                ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+        imx27_add_imx_uart0(&uart_pdata);
+
+        imx27_add_mxc_nand(&cpuimx27_nand_board_info);
+
+        i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+                                ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+        imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+        /* SDHC2 can be used for Wifi */
+        mxc_register_device(&mxc_sdhc_device1, NULL);
+#endif
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+        /* in which case UART4 is also used for Bluetooth */
+        imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        platform_device_register(&serial_device);
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+        if (otg_mode_host) {
+                otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+                mxc_register_device(&mxc_otg_host, &otg_pdata);
+        }
+
+        usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+        mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+        if (!otg_mode_host)
+                mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+        eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+        mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+        .init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
+        .map_io         = mx27_map_io,
+        .init_irq       = mx27_init_irq,
+        .init_machine   = eukrea_cpuimx27_init,
+        .timer          = &eukrea_cpuimx27_timer,
+MACHINE_END