1 files changed, 106 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
new file mode 100644
index 000000000000..7e49deb128a4
--- /dev/null
+++ b/arch/arm/mach-imx/headsmp.S
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+        .section ".text.head", "ax"
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+        mov     r0, #0
+        mcr     p15, 0, r0, c7, c5, 0   @ invalidate I cache
+        mcr     p15, 2, r0, c0, c0, 0
+        mrc     p15, 1, r0, c0, c0, 0
+
+        ldr     r1, =0x7fff
+        and     r2, r1, r0, lsr #13
+
+        ldr     r1, =0x3ff
+
+        and     r3, r1, r0, lsr #3      @ NumWays - 1
+        add     r2, r2, #1              @ NumSets
+
+        and     r0, r0, #0x7
+        add     r0, r0, #4      @ SetShift
+
+        clz     r1, r3          @ WayShift
+        add     r4, r3, #1      @ NumWays
+1:      sub     r2, r2, #1      @ NumSets--
+        mov     r3, r4          @ Temp = NumWays
+2:      subs    r3, r3, #1      @ Temp--
+        mov     r5, r3, lsl r1
+        mov     r6, r2, lsl r0
+        orr     r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+        mcr     p15, 0, r5, c7, c6, 2
+        bgt     2b
+        cmp     r2, #0
+        bgt     1b
+        dsb
+        isb
+        mov     pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+        bl      v7_invalidate_l1
+        b       secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * The following code is located into the .data section.  This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+        .data
+        .align
+
+#ifdef CONFIG_CACHE_L2X0
+        .macro  pl310_resume
+        ldr     r2, phys_l2x0_saved_regs
+        ldr     r0, [r2, #L2X0_R_PHY_BASE]      @ get physical base of l2x0
+        ldr     r1, [r2, #L2X0_R_AUX_CTRL]      @ get aux_ctrl value
+        str     r1, [r0, #L2X0_AUX_CTRL]        @ restore aux_ctrl
+        mov     r1, #0x1
+        str     r1, [r0, #L2X0_CTRL]            @ re-enable L2
+        .endm
+
+        .globl  phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+        .long   0
+#else
+        .macro  pl310_resume
+        .endm
+#endif
+
+ENTRY(v7_cpu_resume)
+        bl      v7_invalidate_l1
+        pl310_resume
+        b       cpu_resume
+ENDPROC(v7_cpu_resume)
+#endif