1 files changed, 118 insertions, 20 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 197f9e241cff..17d2e608a214 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,13 +1,37 @@
 config IMX_HAVE_DMA_V1
         bool
 
-if ARCH_MX1
-
 config SOC_IMX1
+        bool
         select CPU_ARM920T
         select IMX_HAVE_DMA_V1
         select IMX_HAVE_IOMUX_V1
+        select MXC_AVIC
+
+config SOC_IMX21
+        bool
+        select CPU_ARM926T
+        select ARCH_MXC_AUDMUX_V1
+        select IMX_HAVE_DMA_V1
+        select IMX_HAVE_IOMUX_V1
+        select MXC_AVIC
+
+config SOC_IMX25
         bool
+        select CPU_ARM926T
+        select ARCH_MXC_AUDMUX_V2
+        select ARCH_MXC_IOMUX_V3
+        select MXC_AVIC
+
+config SOC_IMX27
+        bool
+        select CPU_ARM926T
+        select ARCH_MXC_AUDMUX_V1
+        select IMX_HAVE_DMA_V1
+        select IMX_HAVE_IOMUX_V1
+        select MXC_AVIC
+
+if ARCH_MX1
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -31,33 +55,17 @@ endif
 
 if ARCH_MX2
 
-config SOC_IMX21
-        select CPU_ARM926T
-        select ARCH_MXC_AUDMUX_V1
-        select IMX_HAVE_DMA_V1
-        select IMX_HAVE_IOMUX_V1
-        bool
-
-config SOC_IMX27
-        select CPU_ARM926T
-        select ARCH_MXC_AUDMUX_V1
-        select IMX_HAVE_DMA_V1
-        select IMX_HAVE_IOMUX_V1
-        bool
-
 choice
         prompt "CPUs:"
         default MACH_MX21
 
 config MACH_MX21
         bool "i.MX21 support"
-        select SOC_IMX21
         help
           This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
         bool "i.MX27 support"
-        select SOC_IMX27
         help
           This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -71,7 +79,10 @@ comment "MX21 platforms:"
 
 config MACH_MX21ADS
         bool "MX21ADS platform"
+        select SOC_IMX21
+        select IMX_HAVE_PLATFORM_IMX_FB
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_MXC_NAND
         help
           Include support for MX21ADS platform. This includes specific
@@ -79,24 +90,79 @@ config MACH_MX21ADS
 
 endif
 
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+        bool "Support MX25PDK (3DS) Platform"
+        select SOC_IMX25
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMXDI_RTC
+        select IMX_HAVE_PLATFORM_IMX_FB
+        select IMX_HAVE_PLATFORM_IMX_KEYPAD
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+
+config MACH_EUKREA_CPUIMX25
+        bool "Support Eukrea CPUIMX25 Platform"
+        select SOC_IMX25
+        select IMX_HAVE_PLATFORM_FLEXCAN
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMXDI_RTC
+        select IMX_HAVE_PLATFORM_IMX_FB
+        select IMX_HAVE_PLATFORM_IMX_I2C
+        select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        select MXC_ULPI if USB_ULPI
+
+choice
+        prompt "Baseboard"
+        depends on MACH_EUKREA_CPUIMX25
+        default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+        bool "Eukrea MBIMXSD development board"
+        select IMX_HAVE_PLATFORM_IMX_SSI
+        help
+          This adds board specific devices that can be found on Eukrea's
+          MBIMXSD evaluation board.
+
+endchoice
+
+endif
+
 if MACH_MX27
 
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
         bool "MX27ADS platform"
+        select SOC_IMX27
+        select IMX_HAVE_PLATFORM_IMX_FB
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_MXC_W1
         help
           Include support for MX27ADS platform. This includes specific
           configurations for the board and its peripherals.
 
 config MACH_PCM038
         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+        select SOC_IMX27
+        select IMX_HAVE_PLATFORM_IMX2_WDT
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
         select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_MXC_W1
         select IMX_HAVE_PLATFORM_SPI_IMX
         select MXC_ULPI if USB_ULPI
         help
@@ -109,8 +175,9 @@ choice
         default MACH_PCM970_BASEBOARD
 
 config MACH_PCM970_BASEBOARD
-        prompt "PHYTEC PCM970 development board"
-        bool
+        bool "PHYTEC PCM970 development board"
+        select IMX_HAVE_PLATFORM_IMX_FB
+        select IMX_HAVE_PLATFORM_MXC_MMC
         help
           This adds board specific devices that can be found on Phytec's
           PCM970 evaluation board.
@@ -119,9 +186,14 @@ endchoice
 
 config MACH_CPUIMX27
         bool "Eukrea CPUIMX27 module"
+        select SOC_IMX27
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
         select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_MXC_W1
         select MXC_ULPI if USB_ULPI
         help
           Include support for Eukrea CPUIMX27 platform. This includes
@@ -130,6 +202,7 @@ config MACH_CPUIMX27
 config MACH_EUKREA_CPUIMX27_USESDHC2
         bool "CPUIMX27 integrates SDHC2 module"
         depends on MACH_CPUIMX27
+        select IMX_HAVE_PLATFORM_MXC_MMC
         help
           This adds support for the internal SDHC2 used on CPUIMX27
           for wifi or eMMC.
@@ -148,8 +221,11 @@ choice
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
         bool "Eukrea MBIMX27 development board"
+        select IMX_HAVE_PLATFORM_IMX_FB
+        select IMX_HAVE_PLATFORM_IMX_KEYPAD
         select IMX_HAVE_PLATFORM_IMX_SSI
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_SPI_IMX
         help
           This adds board specific devices that can be found on Eukrea's
@@ -159,15 +235,26 @@ endchoice
 
 config MACH_MX27_3DS
         bool "MX27PDK platform"
+        select SOC_IMX27
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_KEYPAD
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_SPI_IMX
+        select MXC_ULPI if USB_ULPI
         help
           Include support for MX27PDK platform. This includes specific
           configurations for the board and its peripherals.
 
 config MACH_IMX27_VISSTRIM_M10
         bool "Vista Silicon i.MX27 Visstrim_m10"
+        select SOC_IMX27
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_MMC
+        select IMX_HAVE_PLATFORM_MXC_EHCI
         help
           Include support for Visstrim_m10 platform and its different variants.
           This includes specific configurations for the board and its
@@ -175,6 +262,7 @@ config MACH_IMX27_VISSTRIM_M10
 
 config MACH_IMX27LITE
         bool "LogicPD MX27 LITEKIT platform"
+        select SOC_IMX27
         select IMX_HAVE_PLATFORM_IMX_UART
         help
           Include support for MX27 LITEKIT platform. This includes specific
@@ -182,10 +270,17 @@ config MACH_IMX27LITE
 
 config MACH_PCA100
         bool "Phytec phyCARD-s (pca100)"
+        select SOC_IMX27
+        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+        select IMX_HAVE_PLATFORM_IMX2_WDT
+        select IMX_HAVE_PLATFORM_IMX_FB
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_SSI
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_EHCI
+        select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_MXC_NAND
+        select IMX_HAVE_PLATFORM_MXC_W1
         select IMX_HAVE_PLATFORM_SPI_IMX
         select MXC_ULPI if USB_ULPI
         help
@@ -194,8 +289,11 @@ config MACH_PCA100
 
 config MACH_MXT_TD60
         bool "Maxtrack i-MXT TD60"
+        select SOC_IMX27
+        select IMX_HAVE_PLATFORM_IMX_FB
         select IMX_HAVE_PLATFORM_IMX_I2C
         select IMX_HAVE_PLATFORM_IMX_UART
+        select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_MXC_NAND
         help
           Include support for i-MXT (aka td60) platform. This