1 files changed, 81 insertions, 0 deletions

diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
new file mode 100644
index 000000000000..3456a00d5f5c
--- /dev/null
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -0,0 +1,81 @@
+/*
+ * linux/arch/arm/mach-h720x/h7202-eval.c
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *               2004 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Architecture specific stuff for Hynix HMS30C7202 development board
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/device.h>
+
+#include <asm/setup.h>
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+static struct resource cirrus_resources[] = {
+        [0] = {
+                .start  = ETH0_PHYS + 0x300,
+                .end    = ETH0_PHYS + 0x300 + 0x10,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_CHAINED_GPIOB(8),
+                .end    = IRQ_CHAINED_GPIOB(8),
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cirrus_device = {
+        .name           = "cirrus-cs89x0",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(cirrus_resources),
+        .resource       = cirrus_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &cirrus_device,
+};
+
+/*
+ * Hardware init. This is called early in initcalls
+ * Place pin inits here. So you avoid adding ugly
+ * #ifdef stuff to common drivers.
+ * Use this only, if your bootloader is not able
+ * to initialize the pins proper.
+ */
+static void __init init_eval_h7202(void)
+{
+        init_hw_h7202();
+        (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+        /* Enable interrupt on portb bit 8 (ethernet) */
+        CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
+        CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
+}
+
+MACHINE_START(H7202, "Hynix HMS30C7202")
+        MAINTAINER("Robert Schwebel, Pengutronix")
+        BOOT_MEM(0x40000000, 0x80000000, 0xf0000000)
+        BOOT_PARAMS(0x40000100)
+        MAPIO(h720x_map_io)
+        INITIRQ(h7202_init_irq)
+        .timer = &h7202_timer,
+        INIT_MACHINE(init_eval_h7202)
+MACHINE_END