5 files changed, 26 insertions, 11 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32f147998cd9..c0deacae778d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
         depends on ARCH_DAVINCI_DM644x
         select MISC_DEVICES
         select EEPROM_AT24
+        select I2C
         help
           Configure this option to specify the whether the board used
           for development is a DM644x EVM
@@ -72,6 +73,7 @@ config MACH_SFFSDR
         depends on ARCH_DAVINCI_DM644x
         select MISC_DEVICES
         select EEPROM_AT24
+        select I2C
         help
           Say Y here to select the Lyrtech Small Form Factor
           Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
         select MACH_DAVINCI_DM6467TEVM
         select MISC_DEVICES
         select EEPROM_AT24
+        select I2C
         help
           Configure this option to specify the whether the board used
           for development is a DM6467 EVM
@@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
         depends on ARCH_DAVINCI_DM365
         select MISC_DEVICES
         select EEPROM_AT24
+        select I2C
         help
           Configure this option to specify whether the board used
           for development is a DM365 EVM
@@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
         select GPIO_PCF857X
         select MISC_DEVICES
         select EEPROM_AT24
+        select I2C
         help
           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
         depends on ARCH_DAVINCI_DA850
         select MISC_DEVICES
         select EEPROM_AT24
+        select I2C
         help
           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
           System on Module.  Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 2aa79c54f98e..606a6f27ed6c 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -29,7 +29,7 @@
 #include <mach/mux.h>
 #include <mach/spi.h>
 
-#define MITYOMAPL138_PHY_ID             "0:03"
+#define MITYOMAPL138_PHY_ID             ""
 
 #define FACTORY_CONFIG_MAGIC    0x012C0138
 #define FACTORY_CONFIG_VERSION  0x00010001
@@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
 
 static struct platform_device mityomapl138_nandflash_device = {
         .name           = "davinci_nand",
-        .id             = 0,
+        .id             = 1,
         .dev            = {
                 .platform_data  = &mityomapl138_nandflash_data,
         },
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 625d4b66718b..58a02dc7b15a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -39,7 +39,8 @@
 #define DA8XX_GPIO_BASE                 0x01e26000
 #define DA8XX_I2C1_BASE                 0x01e28000
 #define DA8XX_SPI0_BASE                 0x01c41000
-#define DA8XX_SPI1_BASE                 0x01f0e000
+#define DA830_SPI1_BASE                 0x01e12000
+#define DA850_SPI1_BASE                 0x01f0e000
 
 #define DA8XX_EMAC_CTRL_REG_OFFSET      0x3000
 #define DA8XX_EMAC_MOD_REG_OFFSET       0x2000
@@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
 
 static struct resource da8xx_spi1_resources[] = {
         [0] = {
-                .start  = DA8XX_SPI1_BASE,
-                .end    = DA8XX_SPI1_BASE + SZ_4K - 1,
+                .start  = DA830_SPI1_BASE,
+                .end    = DA830_SPI1_BASE + SZ_4K - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
         da8xx_spi_pdata[instance].num_chipselect = len;
 
+        if (instance == 1 && cpu_is_davinci_da850()) {
+                da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+                da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+        }
+
         return platform_device_register(&da8xx_spi_device[instance]);
 }
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9f1befc5ac38..f8b7ea4f6235 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,6 +24,9 @@
 
 #define UART_SHIFT      2
 
+#define davinci_uart_v2p(x)     ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x)     ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
                 .pushsection .data
 davinci_uart_phys:      .word   0
 davinci_uart_virt:      .word   0
@@ -34,7 +37,7 @@ davinci_uart_virt:	.word	0
                 /* Use davinci_uart_phys/virt if already configured */
 10:             mrc     p15, 0, \rp, c1, c0
                 tst     \rp, #1                 @ MMU enabled?
-                ldreq   \rp, =__virt_to_phys(davinci_uart_phys)
+                ldreq   \rp, =davinci_uart_v2p(davinci_uart_phys)
                 ldrne   \rp, =davinci_uart_phys
                 add     \rv, \rp, #4            @ davinci_uart_virt
                 ldr     \rp, [\rp, #0]
@@ -48,18 +51,18 @@ davinci_uart_virt:	.word	0
                 tst     \rp, #1                 @ MMU enabled?
 
                 /* Copy uart phys address from decompressor uart info */
-                ldreq   \rv, =__virt_to_phys(davinci_uart_phys)
+                ldreq   \rv, =davinci_uart_v2p(davinci_uart_phys)
                 ldrne   \rv, =davinci_uart_phys
                 ldreq   \rp, =DAVINCI_UART_INFO
-                ldrne   \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+                ldrne   \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
                 ldr     \rp, [\rp, #0]
                 str     \rp, [\rv]
 
                 /* Copy uart virt address from decompressor uart info */
-                ldreq   \rv, =__virt_to_phys(davinci_uart_virt)
+                ldreq   \rv, =davinci_uart_v2p(davinci_uart_virt)
                 ldrne   \rv, =davinci_uart_virt
                 ldreq   \rp, =DAVINCI_UART_INFO
-                ldrne   \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+                ldrne   \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
                 ldr     \rp, [\rp, #4]
                 str     \rp, [\rv]
 
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 8051110b8ac3..c9e6ce185a66 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -22,7 +22,7 @@
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
  */
-#define DAVINCI_UART_INFO       (PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO       (PLAT_PHYS_OFFSET + 0x3ff8)
 
 #define DAVINCI_UART0_BASE      (IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE      (IO_PHYS + 0x20400)