1 files changed, 71 insertions, 62 deletions

diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 574cb810a500..b49e9d092aab 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -1,7 +1,7 @@
 /*
  * TI DaVinci GPIO Support
  *
- * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2006-2007 David Brownell
  * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -26,47 +26,45 @@
 
 #include <asm/mach/irq.h>
 
-static DEFINE_SPINLOCK(gpio_lock);
-static DECLARE_BITMAP(gpio_in_use, DAVINCI_N_GPIO);
 
-int gpio_request(unsigned gpio, const char *tag)
-{
-        if (gpio >= DAVINCI_N_GPIO)
-                return -EINVAL;
+static DEFINE_SPINLOCK(gpio_lock);
 
-        if (test_and_set_bit(gpio, gpio_in_use))
-                return -EBUSY;
+struct davinci_gpio {
+        struct gpio_chip        chip;
+        struct gpio_controller  *__iomem regs;
+};
 
-        return 0;
-}
-EXPORT_SYMBOL(gpio_request);
+static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
 
-void gpio_free(unsigned gpio)
-{
-        if (gpio >= DAVINCI_N_GPIO)
-                return;
-
-        clear_bit(gpio, gpio_in_use);
-}
-EXPORT_SYMBOL(gpio_free);
 
 /* create a non-inlined version */
-static struct gpio_controller *__iomem gpio2controller(unsigned gpio)
+static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
 {
         return __gpio_to_controller(gpio);
 }
 
+
+/*--------------------------------------------------------------------------*/
+
 /*
- * Assuming the pin is muxed as a gpio output, set its output value.
+ * board setup code *MUST* set PINMUX0 and PINMUX1 as
+ * needed, and enable the GPIO clock.
  */
-void __gpio_set(unsigned gpio, int value)
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
 {
-        struct gpio_controller *__iomem g = gpio2controller(gpio);
+        struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+        struct gpio_controller *__iomem g = d->regs;
+        u32 temp;
 
-        __raw_writel(__gpio_mask(gpio), value ? &g->set_data : &g->clr_data);
-}
-EXPORT_SYMBOL(__gpio_set);
+        spin_lock(&gpio_lock);
+        temp = __raw_readl(&g->dir);
+        temp |= (1 << offset);
+        __raw_writel(temp, &g->dir);
+        spin_unlock(&gpio_lock);
 
+        return 0;
+}
 
 /*
  * Read the pin's value (works even if it's set up as output);
@@ -75,61 +73,72 @@ EXPORT_SYMBOL(__gpio_set);
  * Note that changes are synched to the GPIO clock, so reading values back
  * right after you've set them may give old values.
  */
-int __gpio_get(unsigned gpio)
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-        struct gpio_controller *__iomem g = gpio2controller(gpio);
+        struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+        struct gpio_controller *__iomem g = d->regs;
 
-        return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+        return (1 << offset) & __raw_readl(&g->in_data);
 }
-EXPORT_SYMBOL(__gpio_get);
 
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * board setup code *MUST* set PINMUX0 and PINMUX1 as
- * needed, and enable the GPIO clock.
- */
-
-int gpio_direction_input(unsigned gpio)
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
 {
-        struct gpio_controller *__iomem g = gpio2controller(gpio);
+        struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+        struct gpio_controller *__iomem g = d->regs;
         u32 temp;
-        u32 mask;
-
-        if (!g)
-                return -EINVAL;
+        u32 mask = 1 << offset;
 
         spin_lock(&gpio_lock);
-        mask = __gpio_mask(gpio);
         temp = __raw_readl(&g->dir);
-        temp |= mask;
+        temp &= ~mask;
+        __raw_writel(mask, value ? &g->set_data : &g->clr_data);
         __raw_writel(temp, &g->dir);
         spin_unlock(&gpio_lock);
         return 0;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned gpio, int value)
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-        struct gpio_controller *__iomem g = gpio2controller(gpio);
-        u32 temp;
-        u32 mask;
+        struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+        struct gpio_controller *__iomem g = d->regs;
 
-        if (!g)
-                return -EINVAL;
+        __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+        int i, base;
+
+        for (i = 0, base = 0;
+                        i < ARRAY_SIZE(chips);
+                        i++, base += 32) {
+                chips[i].chip.label = "DaVinci";
+
+                chips[i].chip.direction_input = davinci_direction_in;
+                chips[i].chip.get = davinci_gpio_get;
+                chips[i].chip.direction_output = davinci_direction_out;
+                chips[i].chip.set = davinci_gpio_set;
+
+                chips[i].chip.base = base;
+                chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+                if (chips[i].chip.ngpio > 32)
+                        chips[i].chip.ngpio = 32;
+
+                chips[i].regs = gpio2controller(base);
+
+                gpiochip_add(&chips[i].chip);
+        }
 
-        spin_lock(&gpio_lock);
-        mask = __gpio_mask(gpio);
-        temp = __raw_readl(&g->dir);
-        temp &= ~mask;
-        __raw_writel(mask, value ? &g->set_data : &g->clr_data);
-        __raw_writel(temp, &g->dir);
-        spin_unlock(&gpio_lock);
         return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
+pure_initcall(davinci_gpio_setup);
 
+/*--------------------------------------------------------------------------*/
 /*
  * We expect irqs will normally be set up as input pins, but they can also be
  * used as output pins ... which is convenient for testing.