1 files changed, 79 insertions, 4 deletions

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6ab64ccd496..77e806798822 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -117,6 +119,8 @@ static struct davinci_i2c_platform_data i2c_pdata = {
         .bus_delay      = 0     /* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data;
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -134,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-        { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+        {       I2C_BOARD_INFO("dm355evm_msp", 0x25),
                 .platform_data = dm355evm_mmcsd_gpios,
-                /* plus irq */ },
-        /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-        /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+        },
+        /* { plus irq  }, */
+        { I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 };
 
 static void __init evm_init_i2c(void)
@@ -177,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
         .num_resources  = ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+        .clk_polarity = 0,
+        .hs_polarity = 1,
+        .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+        {
+                .index = 0,
+                .name = "Composite",
+                .type = V4L2_INPUT_TYPE_CAMERA,
+                .std = TVP514X_STD_ALL,
+        },
+        {
+                .index = 1,
+                .name = "S-Video",
+                .type = V4L2_INPUT_TYPE_CAMERA,
+                .std = TVP514X_STD_ALL,
+        },
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+        {
+                .input = INPUT_CVBS_VI2B,
+                .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+        },
+        {
+                .input = INPUT_SVIDEO_VI2C_VI1C,
+                .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+        },
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+        {
+                .name = "tvp5146",
+                .grp_id = 0,
+                .num_inputs = ARRAY_SIZE(tvp5146_inputs),
+                .inputs = tvp5146_inputs,
+                .routes = tvp5146_routes,
+                .can_route = 1,
+                .ccdc_if_params = {
+                        .if_type = VPFE_BT656,
+                        .hdpol = VPFE_PINPOL_POSITIVE,
+                        .vdpol = VPFE_PINPOL_POSITIVE,
+                },
+                .board_info = {
+                        I2C_BOARD_INFO("tvp5146", 0x5d),
+                        .platform_data = &tvp5146_pdata,
+                },
+        }
+};
+
+static struct vpfe_config vpfe_cfg = {
+        .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+        .sub_devs = vpfe_sub_devs,
+        .card_name = "DM355 EVM",
+        .ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
         &dm355evm_dm9000,
         &davinci_nand_device,
@@ -188,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+        /* setup input configuration for VPFE input devices */
+        dm355_set_vpfe_config(&vpfe_cfg);
         dm355_init();
 }
 
@@ -279,6 +351,9 @@ static __init void dm355_evm_init(void)
 
         dm355_init_spi0(BIT(0), dm355_evm_spi_info,
                         ARRAY_SIZE(dm355_evm_spi_info));
+
+        /* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+        dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)