65 files changed, 16648 insertions, 0 deletions

diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 000000000000..457b4384913e
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+        prompt "Processor selection in BCMRING family of devices"
+        depends on ARCH_BCMRING
+        default ARCH_BCM11107
+
+config ARCH_FPGA11107
+        bool "FPGA11107"
+
+config ARCH_BCM11107
+        bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+        depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+        hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 000000000000..f8d9fcedf917
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 000000000000..fb53b283bebb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y      := $(CONFIG_BCM_ZRELADDR)
+params_phys-y   := 0x00000800
+
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 000000000000..0da693b0f7e1
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM               1
+#define CTL_BCM_REBOOT                 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot;   /* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+        {
+         .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+         .procname = "warm",
+         .data = &bcmring_arch_warm_reboot,
+         .maxlen = sizeof(int),
+         .mode = 0644,
+         .proc_handler = &proc_dointvec},
+        {}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+        {
+         .ctl_name = CTL_BCM_REBOOT,
+         .procname = "reboot",
+         .mode = 0555,
+         .child = bcmring_sysctl_warm_reboot},
+        {}
+};
+
+static struct platform_device nand_device = {
+        .name = "bcm-nand",
+        .id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+        &nand_device,
+};
+
+/****************************************************************************
+*
+*   Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+*   The customize_machine function is tagged as an arch_initcall
+*   (see include/linux/init.h for the order that the various init sections
+*   are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+        bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+        /* Enable spread spectrum */
+        chipcHw_enableSpreadSpectrum();
+
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+
+        bcmring_amba_init();
+
+        dma_init();
+}
+
+/****************************************************************************
+*
+*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+*   passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+     struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+        printk(KERN_NOTICE "bcmring_fixup\n");
+        t->hdr.tag = ATAG_CORE;
+        t->hdr.size = tag_size(tag_core);
+        t->u.core.flags = 0;
+        t->u.core.pagesize = PAGE_SIZE;
+        t->u.core.rootdev = 31 << 8 | 0;
+        t = tag_next(t);
+
+        t->hdr.tag = ATAG_MEM;
+        t->hdr.size = tag_size(tag_mem32);
+        t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+        t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+        t = tag_next(t);
+
+        t->hdr.tag = ATAG_NONE;
+        t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+*   Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+        /* Maintainer: Broadcom Corporation */
+        .phys_io = MM_IO_START,
+        .io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+        .fixup = bcmring_fixup,
+        .map_io = bcmring_map_io,
+        .init_irq = bcmring_init_irq,
+        .timer = &bcmring_timer,
+        .init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 000000000000..14bafc38f2dc
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+        if (!clk)
+                return;
+
+        /* enable parent clock first */
+        if (clk->parent)
+                __clk_enable(clk->parent);
+
+        if (clk->use_cnt++ == 0) {
+                if (clk_is_pll1(clk)) { /* PLL1 */
+                        chipcHw_pll1Enable(clk->rate_hz, 0);
+                } else if (clk_is_pll2(clk)) {  /* PLL2 */
+                        chipcHw_pll2Enable(clk->rate_hz);
+                } else if (clk_is_using_xtal(clk)) {    /* source is crystal */
+                        if (!clk_is_primary(clk))
+                                chipcHw_bypassClockEnable(clk->csp_id);
+                } else {        /* source is PLL */
+                        chipcHw_setClockEnable(clk->csp_id);
+                }
+        }
+}
+
+int clk_enable(struct clk *clk)
+{
+        unsigned long flags;
+
+        if (!clk)
+                return -EINVAL;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        __clk_enable(clk);
+        spin_unlock_irqrestore(&clk_lock, flags);
+
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+        if (!clk)
+                return;
+
+        BUG_ON(clk->use_cnt == 0);
+
+        if (--clk->use_cnt == 0) {
+                if (clk_is_pll1(clk)) { /* PLL1 */
+                        chipcHw_pll1Disable();
+                } else if (clk_is_pll2(clk)) {  /* PLL2 */
+                        chipcHw_pll2Disable();
+                } else if (clk_is_using_xtal(clk)) {    /* source is crystal */
+                        if (!clk_is_primary(clk))
+                                chipcHw_bypassClockDisable(clk->csp_id);
+                } else {        /* source is PLL */
+                        chipcHw_setClockDisable(clk->csp_id);
+                }
+        }
+
+        if (clk->parent)
+                __clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+        unsigned long flags;
+
+        if (!clk)
+                return;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        __clk_disable(clk);
+        spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+        if (!clk)
+                return 0;
+
+        return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        unsigned long actual;
+        unsigned long rate_hz;
+
+        if (!clk)
+                return -EINVAL;
+
+        if (!clk_is_programmable(clk))
+                return -EINVAL;
+
+        if (clk->use_cnt)
+                return -EBUSY;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        actual = clk->parent->rate_hz;
+        rate_hz = min(actual, rate);
+        spin_unlock_irqrestore(&clk_lock, flags);
+
+        return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+        unsigned long flags;
+        unsigned long actual;
+        unsigned long rate_hz;
+
+        if (!clk)
+                return -EINVAL;
+
+        if (!clk_is_programmable(clk))
+                return -EINVAL;
+
+        if (clk->use_cnt)
+                return -EBUSY;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        actual = clk->parent->rate_hz;
+        rate_hz = min(actual, rate);
+        rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+        clk->rate_hz = rate_hz;
+        spin_unlock_irqrestore(&clk_lock, flags);
+
+        return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+        if (!clk)
+                return NULL;
+
+        return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+        unsigned long flags;
+        struct clk *old_parent;
+
+        if (!clk || !parent)
+                return -EINVAL;
+
+        if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+                return -EINVAL;
+
+        /* if more than one user, parent is not allowed */
+        if (clk->use_cnt > 1)
+                return -EBUSY;
+
+        if (clk->parent == parent)
+                return 0;
+
+        spin_lock_irqsave(&clk_lock, flags);
+        old_parent = clk->parent;
+        clk->parent = parent;
+        if (clk_is_using_xtal(parent))
+                clk->mode |= CLK_MODE_XTAL;
+        else
+                clk->mode &= (~CLK_MODE_XTAL);
+
+        /* if clock is active */
+        if (clk->use_cnt != 0) {
+                clk->use_cnt--;
+                /* enable clock with the new parent */
+                __clk_enable(clk);
+                /* disable the old parent */
+                __clk_disable(old_parent);
+        }
+        spin_unlock_irqrestore(&clk_lock, flags);
+
+        return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 000000000000..5e0b98138973
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY         1      /* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1            2      /* PPL1 */
+#define CLK_TYPE_PLL2            4      /* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE    8      /* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE      16     /* parent can be changed */
+
+#define CLK_MODE_XTAL            1      /* clock source is from crystal */
+
+struct clk {
+        const char *name;       /* clock name */
+        unsigned int type;      /* clock type */
+        unsigned int mode;      /* current mode */
+        volatile int use_bypass;        /* indicate if it's in bypass mode */
+        chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */
+        unsigned long rate_hz;  /* clock rate in Hz */
+        unsigned int use_cnt;   /* usage count */
+        struct clk *parent;     /* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 000000000000..492c649f451e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ *  derived from linux/arch/arm/mach-versatile/core.c
+ *  linux/arch/arm/mach-bcmring/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size)       \
+static struct amba_device name##_device = {     \
+   .dev = {                                     \
+      .coherent_dma_mask = ~0,                  \
+      .init_name = initname,                    \
+      .platform_data = plat                     \
+   },                                           \
+   .res = {                                     \
+      .start = MM_ADDR_IO_##base,               \
+                .end = MM_ADDR_IO_##base + (size) - 1,    \
+      .flags = IORESOURCE_MEM                   \
+   },                                           \
+   .dma_mask = ~0,                              \
+   .irq = {                                     \
+      IRQ_##base                                \
+   }                                            \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+        .name = "PLL1",
+        .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+        .rate_hz = 2000000000,
+        .use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+        .name = "UART",
+        .type = CLK_TYPE_PROGRAMMABLE,
+        .csp_id = chipcHw_CLOCK_UART,
+        .rate_hz = HW_CFG_UART_CLK_HZ,
+        .parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+        {                       /* UART0 */
+         .dev_id = "uarta",
+         .clk = &uart_clk,
+         }, {                   /* UART1 */
+             .dev_id = "uartb",
+             .clk = &uart_clk,
+             }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+        &uartA_device,
+        &uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+        int i;
+        u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+        chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+        secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+                          secHw_BLK_MASK_KEY_SCAN |
+                          secHw_BLK_MASK_TOUCH_SCREEN |
+                          secHw_BLK_MASK_UART0 |
+                          secHw_BLK_MASK_UART1 |
+                          secHw_BLK_MASK_WATCHDOG |
+                          secHw_BLK_MASK_SPUM |
+                          secHw_BLK_MASK_DDR2 |
+                          secHw_BLK_MASK_SPU |
+                          secHw_BLK_MASK_PKA |
+                          secHw_BLK_MASK_RNG |
+                          secHw_BLK_MASK_RTC |
+                          secHw_BLK_MASK_OTP |
+                          secHw_BLK_MASK_BOOT |
+                          secHw_BLK_MASK_MPU |
+                          secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+        /* Only the devices attached to the AMBA bus are enabled just before the bus is */
+        /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+        /* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+        /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+        bus_clock = chipcHw_REG_BUS_CLOCK_GE
+            | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+        chipcHw_busInterfaceClockEnable(bus_clock);
+
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+                struct amba_device *d = amba_devs[i];
+                amba_device_register(d, &iomem_resource);
+        }
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE           MM_IO_BASE_TMR
+#define TIMER1_VA_BASE          (MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE          (MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD    (TIMER_INTERVAL >> 4)   /* Divide by 16 */
+#define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD    (TIMER_INTERVAL)
+#define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+                           struct clock_event_device *clk)
+{
+        unsigned long ctrl;
+
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+                ctrl = TIMER_CTRL_PERIODIC;
+                ctrl |=
+                    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+                    TIMER_CTRL_ENABLE;
+                break;
+        case CLOCK_EVT_MODE_ONESHOT:
+                /* period set, and timer enabled in 'next_event' hook */
+                ctrl = TIMER_CTRL_ONESHOT;
+                ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+                break;
+        case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        default:
+                ctrl = 0;
+        }
+
+        writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+                                struct clock_event_device *unused)
+{
+        unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+        writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+        writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+        return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+        .name = "timer0",
+        .shift = 32,
+        .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .set_mode = timer_set_mode,
+        .set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = &timer0_clockevent;
+
+        writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+        evt->event_handler(evt);
+
+        return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+        .name = "bcmring Timer Tick",
+        .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+        return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+        return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+        .name = "timer1",
+        .rating = 200,
+        .read = bcmring_get_cycles_timer1,
+        .mask = CLOCKSOURCE_MASK(32),
+        .shift = 20,
+        .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+        .name = "timer3",
+        .rating = 100,
+        .read = bcmring_get_cycles_timer3,
+        .mask = CLOCKSOURCE_MASK(32),
+        .shift = 20,
+        .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+        /* setup timer1 as free-running clocksource */
+        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+        writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+        writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+        writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+               TIMER1_VA_BASE + TIMER_CTRL);
+
+        clocksource_bcmring_timer1.mult =
+            clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+                                 clocksource_bcmring_timer1.shift);
+        clocksource_register(&clocksource_bcmring_timer1);
+
+        /* setup timer3 as free-running clocksource */
+        writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+        writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+        writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+        writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+               TIMER3_VA_BASE + TIMER_CTRL);
+
+        clocksource_bcmring_timer3.mult =
+            clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+                                 clocksource_bcmring_timer3.shift);
+        clocksource_register(&clocksource_bcmring_timer3);
+
+        return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+        printk(KERN_INFO "bcmring_init_timer\n");
+        /*
+         * Initialise to a known state (all timers off)
+         */
+        writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+        /*
+         * Make irqs happen for the system timer
+         */
+        setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+        bcmring_clocksource_init();
+
+        timer0_clockevent.mult =
+            div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+        timer0_clockevent.max_delta_ns =
+            clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+        timer0_clockevent.min_delta_ns =
+            clockevent_delta2ns(0xf, &timer0_clockevent);
+
+        timer0_clockevent.cpumask = cpumask_of(0);
+        clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+        .init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 000000000000..b197ba48e36e
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 000000000000..648c0377530e
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 000000000000..673952768ee5
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 000000000000..b3a61d860c65
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw.c
+*
+*  @brief   Low level Various CHIP clock controlling routines
+*
+*  @note
+*
+*   These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT         0xFFFF   /* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS       10       /* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK                      1        /* PLL Clock */
+#define NON_PLL_CLOCK                  2        /* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock    /*  [ IN ] Configurable clock */
+    ) {
+        volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+        volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+        volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+        uint32_t vcoFreqPll1Hz = 0;     /* Effective VCO frequency for PLL1 in Hz */
+        uint32_t vcoFreqPll2Hz = 0;     /* Effective VCO frequency for PLL2 in Hz */
+        uint32_t dependentClockType = 0;
+        uint32_t vcoHz = 0;
+
+        /* Get VCO frequencies */
+        if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+                uint64_t adjustFreq = 0;
+
+                vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+                    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+                    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+                     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+                /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+                adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+                        (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+                        chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+                vcoFreqPll1Hz += (uint32_t) adjustFreq;
+        } else {
+                vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+                    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+                    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+                     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+        }
+        vcoFreqPll2Hz =
+            chipcHw_XTAL_FREQ_Hz *
+                 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+            ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+             chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+        switch (clock) {
+        case chipcHw_CLOCK_DDR:
+                pPLLReg = &pChipcHw->DDRClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ARM:
+                pPLLReg = &pChipcHw->ARMClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ESW:
+                pPLLReg = &pChipcHw->ESWClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_VPM:
+                pPLLReg = &pChipcHw->VPMClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ESW125:
+                pPLLReg = &pChipcHw->ESW125Clock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_UART:
+                pPLLReg = &pChipcHw->UARTClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_SDIO0:
+                pPLLReg = &pChipcHw->SDIO0Clock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_SDIO1:
+                pPLLReg = &pChipcHw->SDIO1Clock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_SPI:
+                pPLLReg = &pChipcHw->SPIClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ETM:
+                pPLLReg = &pChipcHw->ETMClock;
+                vcoHz = vcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_USB:
+                pPLLReg = &pChipcHw->USBClock;
+                vcoHz = vcoFreqPll2Hz;
+                break;
+        case chipcHw_CLOCK_LCD:
+                pPLLReg = &pChipcHw->LCDClock;
+                vcoHz = vcoFreqPll2Hz;
+                break;
+        case chipcHw_CLOCK_APM:
+                pPLLReg = &pChipcHw->APMClock;
+                vcoHz = vcoFreqPll2Hz;
+                break;
+        case chipcHw_CLOCK_BUS:
+                pClockCtrl = &pChipcHw->ACLKClock;
+                pDependentClock = &pChipcHw->ARMClock;
+                vcoHz = vcoFreqPll1Hz;
+                dependentClockType = PLL_CLOCK;
+                break;
+        case chipcHw_CLOCK_OTP:
+                pClockCtrl = &pChipcHw->OTPClock;
+                break;
+        case chipcHw_CLOCK_I2C:
+                pClockCtrl = &pChipcHw->I2CClock;
+                break;
+        case chipcHw_CLOCK_I2S0:
+                pClockCtrl = &pChipcHw->I2S0Clock;
+                break;
+        case chipcHw_CLOCK_RTBUS:
+                pClockCtrl = &pChipcHw->RTBUSClock;
+                pDependentClock = &pChipcHw->ACLKClock;
+                dependentClockType = NON_PLL_CLOCK;
+                break;
+        case chipcHw_CLOCK_APM100:
+                pClockCtrl = &pChipcHw->APM100Clock;
+                pDependentClock = &pChipcHw->APMClock;
+                vcoHz = vcoFreqPll2Hz;
+                dependentClockType = PLL_CLOCK;
+                break;
+        case chipcHw_CLOCK_TSC:
+                pClockCtrl = &pChipcHw->TSCClock;
+                break;
+        case chipcHw_CLOCK_LED:
+                pClockCtrl = &pChipcHw->LEDClock;
+                break;
+        case chipcHw_CLOCK_I2S1:
+                pClockCtrl = &pChipcHw->I2S1Clock;
+                break;
+        }
+
+        if (pPLLReg) {
+                /* Obtain PLL clock frequency */
+                if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+                        /* Return crystal clock frequency when bypassed */
+                        return chipcHw_XTAL_FREQ_Hz;
+                } else if (clock == chipcHw_CLOCK_DDR) {
+                        /* DDR frequency is configured in PLLDivider register */
+                        return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+                } else {
+                        /* From chip revision number B0, LCD clock is internally divided by 2 */
+                        if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+                                vcoHz >>= 1;
+                        }
+                        /* Obtain PLL clock frequency using VCO dividers */
+                        return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+                }
+        } else if (pClockCtrl) {
+                /* Obtain divider clock frequency */
+                uint32_t div;
+                uint32_t freq = 0;
+
+                if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+                        /* Return crystal clock frequency when bypassed */
+                        return chipcHw_XTAL_FREQ_Hz;
+                } else if (pDependentClock) {
+                        /* Identify the dependent clock frequency */
+                        switch (dependentClockType) {
+                        case PLL_CLOCK:
+                                if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+                                        /* Use crystal clock frequency when dependent PLL clock is bypassed */
+                                        freq = chipcHw_XTAL_FREQ_Hz;
+                                } else {
+                                        /* Obtain PLL clock frequency using VCO dividers */
+                                        div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+                                        freq = div ? chipcHw_divide(vcoHz, div) : 0;
+                                }
+                                break;
+                        case NON_PLL_CLOCK:
+                                if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+                                        freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+                                } else {
+                                        if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+                                                /* Use crystal clock frequency when dependent divider clock is bypassed */
+                                                freq = chipcHw_XTAL_FREQ_Hz;
+                                        } else {
+                                                /* Obtain divider clock frequency using XTAL dividers */
+                                                div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+                                                freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+                                        }
+                                }
+                                break;
+                        }
+                } else {
+                        /* Dependent on crystal clock */
+                        freq = chipcHw_XTAL_FREQ_Hz;
+                }
+
+                div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+                return chipcHw_divide(freq, (div ? div : 256));
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,   /*  [ IN ] Configurable clock */
+                                       uint32_t freq    /*  [ IN ] Clock frequency in Hz */
+    ) {
+        volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+        volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+        volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+        uint32_t vcoFreqPll1Hz = 0;     /* Effective VCO frequency for PLL1 in Hz */
+        uint32_t desVcoFreqPll1Hz = 0;  /* Desired VCO frequency for PLL1 in Hz */
+        uint32_t vcoFreqPll2Hz = 0;     /* Effective VCO frequency for PLL2 in Hz */
+        uint32_t dependentClockType = 0;
+        uint32_t vcoHz = 0;
+        uint32_t desVcoHz = 0;
+
+        /* Get VCO frequencies */
+        if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+                uint64_t adjustFreq = 0;
+
+                vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+                    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+                    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+                     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+                /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+                adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+                        (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+                        chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+                vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+                /* Desired VCO frequency */
+                desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+                    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+                    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+                      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+        } else {
+                vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+                    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+                    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+                     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+        }
+        vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+            ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+             chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+        switch (clock) {
+        case chipcHw_CLOCK_DDR:
+                /* Configure the DDR_ctrl:BUS ratio settings */
+                {
+                        REG_LOCAL_IRQ_SAVE;
+                        /* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+                        pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+                                << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+                        REG_LOCAL_IRQ_RESTORE;
+                }
+                pPLLReg = &pChipcHw->DDRClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ARM:
+                pPLLReg = &pChipcHw->ARMClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ESW:
+                pPLLReg = &pChipcHw->ESWClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_VPM:
+                /* Configure the VPM:BUS ratio settings */
+                {
+                        REG_LOCAL_IRQ_SAVE;
+                        pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+                                << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+                        REG_LOCAL_IRQ_RESTORE;
+                }
+                pPLLReg = &pChipcHw->VPMClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ESW125:
+                pPLLReg = &pChipcHw->ESW125Clock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_UART:
+                pPLLReg = &pChipcHw->UARTClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_SDIO0:
+                pPLLReg = &pChipcHw->SDIO0Clock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_SDIO1:
+                pPLLReg = &pChipcHw->SDIO1Clock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_SPI:
+                pPLLReg = &pChipcHw->SPIClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_ETM:
+                pPLLReg = &pChipcHw->ETMClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                break;
+        case chipcHw_CLOCK_USB:
+                pPLLReg = &pChipcHw->USBClock;
+                vcoHz = vcoFreqPll2Hz;
+                desVcoHz = vcoFreqPll2Hz;
+                break;
+        case chipcHw_CLOCK_LCD:
+                pPLLReg = &pChipcHw->LCDClock;
+                vcoHz = vcoFreqPll2Hz;
+                desVcoHz = vcoFreqPll2Hz;
+                break;
+        case chipcHw_CLOCK_APM:
+                pPLLReg = &pChipcHw->APMClock;
+                vcoHz = vcoFreqPll2Hz;
+                desVcoHz = vcoFreqPll2Hz;
+                break;
+        case chipcHw_CLOCK_BUS:
+                pClockCtrl = &pChipcHw->ACLKClock;
+                pDependentClock = &pChipcHw->ARMClock;
+                vcoHz = vcoFreqPll1Hz;
+                desVcoHz = desVcoFreqPll1Hz;
+                dependentClockType = PLL_CLOCK;
+                break;
+        case chipcHw_CLOCK_OTP:
+                pClockCtrl = &pChipcHw->OTPClock;
+                break;
+        case chipcHw_CLOCK_I2C:
+                pClockCtrl = &pChipcHw->I2CClock;
+                break;
+        case chipcHw_CLOCK_I2S0:
+                pClockCtrl = &pChipcHw->I2S0Clock;
+                break;
+        case chipcHw_CLOCK_RTBUS:
+                pClockCtrl = &pChipcHw->RTBUSClock;
+                pDependentClock = &pChipcHw->ACLKClock;
+                dependentClockType = NON_PLL_CLOCK;
+                break;
+        case chipcHw_CLOCK_APM100:
+                pClockCtrl = &pChipcHw->APM100Clock;
+                pDependentClock = &pChipcHw->APMClock;
+                vcoHz = vcoFreqPll2Hz;
+                desVcoHz = vcoFreqPll2Hz;
+                dependentClockType = PLL_CLOCK;
+                break;
+        case chipcHw_CLOCK_TSC:
+                pClockCtrl = &pChipcHw->TSCClock;
+                break;
+        case chipcHw_CLOCK_LED:
+                pClockCtrl = &pChipcHw->LEDClock;
+                break;
+        case chipcHw_CLOCK_I2S1:
+                pClockCtrl = &pChipcHw->I2S1Clock;
+                break;
+        }
+
+        if (pPLLReg) {
+                /* Select XTAL as bypass source */
+                reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+                reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+                /* For DDR settings use only the PLL divider clock */
+                if (pPLLReg == &pChipcHw->DDRClock) {
+                        /* Set M1DIV for PLL1, which controls the DDR clock */
+                        reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+                        /* Calculate expected frequency */
+                        freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+                } else {
+                        /* From chip revision number B0, LCD clock is internally divided by 2 */
+                        if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+                                desVcoHz >>= 1;
+                                vcoHz >>= 1;
+                        }
+                        /* Set MDIV to change the frequency */
+                        reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+                        reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+                        /* Calculate expected frequency */
+                        freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+                }
+                /* Wait for for atleast 200ns as per the protocol to change frequency */
+                udelay(1);
+                /* Do not bypass */
+                reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+                /* Return the configured frequency */
+                return freq;
+        } else if (pClockCtrl) {
+                uint32_t divider = 0;
+
+                /* Divider clock should not be bypassed  */
+                reg32_modify_and(pClockCtrl,
+                                 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+                /* Identify the clock source */
+                if (pDependentClock) {
+                        switch (dependentClockType) {
+                        case PLL_CLOCK:
+                                divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+                                break;
+                        case NON_PLL_CLOCK:
+                                {
+                                        uint32_t sourceClock = 0;
+
+                                        if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+                                                sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+                                        } else {
+                                                uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+                                                sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+                                        }
+                                        divider = chipcHw_divide(sourceClock, freq);
+                                }
+                                break;
+                        }
+                } else {
+                        divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+                }
+
+                if (divider) {
+                        REG_LOCAL_IRQ_SAVE;
+                        /* Set the divider to obtain the required frequency */
+                        *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+                        REG_LOCAL_IRQ_RESTORE;
+                        return freq;
+                }
+        }
+
+        return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+        uint32_t phaseControl;
+        uint32_t phaseValue;
+        uint32_t prevPhaseComp;
+        int iter = 0;
+        int adjustCount = 0;
+        int count = 0;
+
+        for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+                phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+                phaseValue = 0;
+                prevPhaseComp = 0;
+
+                /* Step 1: Look for falling PH_COMP transition */
+
+                /* Read the contents of VPM Clock resgister */
+                phaseValue = pChipcHw->VPMClock;
+                do {
+                        /* Store previous value of phase comparator */
+                        prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+                        /* Change the value of PH_CTRL. */
+                        reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+                        /* Wait atleast 20 ns */
+                        udelay(1);
+                        /* Toggle the LOAD_CH after phase control is written. */
+                        pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+                        /* Read the contents of  VPM Clock resgister. */
+                        phaseValue = pChipcHw->VPMClock;
+
+                        if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+                                phaseControl = (0x3F & (phaseControl - 1));
+                        } else {
+                                /* Increment to the Phase count value for next write, if Phase is not stable. */
+                                phaseControl = (0x3F & (phaseControl + 1));
+                        }
+                        /* Count number of adjustment made */
+                        adjustCount++;
+                } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */
+                          ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&  /* Look for a falling edge */
+                         (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */
+                    );
+
+                if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+                        /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+                        return -1;
+                }
+
+                /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+                for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+                        phaseControl = (0x3F & (phaseControl + 1));
+                        reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+                        /* Wait atleast 20 ns */
+                        udelay(1);
+                        /* Toggle the LOAD_CH after phase control is written. */
+                        pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+                        phaseValue = pChipcHw->VPMClock;
+                        /* Count number of adjustment made */
+                        adjustCount++;
+                }
+
+                if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+                        /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+                        return -1;
+                }
+
+                if (count != 5) {
+                        /* Detected false transition */
+                        continue;
+                }
+
+                /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+                for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+                        phaseControl = (0x3F & (phaseControl - 1));
+                        reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+                        /* Wait atleast 20 ns */
+                        udelay(1);
+                        /* Toggle the LOAD_CH after phase control is written. */
+                        pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+                        phaseValue = pChipcHw->VPMClock;
+                        /* Count number of adjustment made */
+                        adjustCount++;
+                }
+
+                if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+                        /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+                        return -1;
+                }
+
+                if (count != 3) {
+                        /* Detected noisy transition */
+                        continue;
+                }
+
+                /* Step 4: Keep moving backward before the original transition took place. */
+
+                for (count = 0; (count < 5); count++) {
+                        phaseControl = (0x3F & (phaseControl - 1));
+                        reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+                        /* Wait atleast 20 ns */
+                        udelay(1);
+                        /* Toggle the LOAD_CH after phase control is written. */
+                        pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+                        phaseValue = pChipcHw->VPMClock;
+                        /* Count number of adjustment made */
+                        adjustCount++;
+                }
+
+                if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+                        /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+                        return -1;
+                }
+
+                if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+                        /* Detected false transition */
+                        continue;
+                }
+
+                /* Step 5: Re discover the valid transition */
+
+                do {
+                        /* Store previous value of phase comparator */
+                        prevPhaseComp = phaseValue;
+                        /* Change the value of PH_CTRL. */
+                        reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+                        /* Wait atleast 20 ns */
+                        udelay(1);
+                        /* Toggle the LOAD_CH after phase control is written. */
+                        pChipcHw->VPMClock ^=
+                            chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+                        /* Read the contents of  VPM Clock resgister. */
+                        phaseValue = pChipcHw->VPMClock;
+
+                        if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+                                phaseControl = (0x3F & (phaseControl - 1));
+                        } else {
+                                /* Increment to the Phase count value for next write, if Phase is not stable. */
+                                phaseControl = (0x3F & (phaseControl + 1));
+                        }
+
+                        /* Count number of adjustment made */
+                        adjustCount++;
+                } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+                if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+                        /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
+                        return -1;
+                } else {
+                        /* Valid phase must have detected */
+                        break;
+                }
+        }
+
+        /* For VPM Phase should be perfectly aligned. */
+        phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+        {
+                REG_LOCAL_IRQ_SAVE;
+
+                pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+                /* Load new phase value */
+                pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+                REG_LOCAL_IRQ_RESTORE;
+        }
+        /* Return the status */
+        return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+        if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+                return vpmPhaseAlignA0();
+        } else {
+                uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+                uint32_t phaseValue = 0;
+                int adjustCount = 0;
+
+                /* Disable VPM access */
+                pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+                /* Disable HW VPM phase alignment  */
+                chipcHw_vpmHwPhaseAlignDisable();
+                /* Enable SW VPM phase alignment  */
+                chipcHw_vpmSwPhaseAlignEnable();
+                /* Adjust VPM phase */
+                while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+                        phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+                        /* Adjust phase control value */
+                        if (phaseValue > 0xF) {
+                                /* Increment phase control value */
+                                phaseControl++;
+                        } else if (phaseValue < 0xF) {
+                                /* Decrement phase control value */
+                                phaseControl--;
+                        } else {
+                                /* Enable VPM access */
+                                pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+                                /* Return adjust count */
+                                return adjustCount;
+                        }
+                        /* Change the value of PH_CTRL. */
+                        reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+                        /* Wait atleast 20 ns */
+                        udelay(1);
+                        /* Toggle the LOAD_CH after phase control is written. */
+                        pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+                        /* Count adjustment */
+                        adjustCount++;
+                }
+        }
+
+        /* Disable VPM access */
+        pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+        return -1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+        int r;
+        int t = 1;
+
+        /* Shift denom and t up to the largest value to optimize algorithm */
+        /* t contains the units of each divide */
+        while ((denom & 0x40000000) == 0) {     /* fails if denom=0 */
+                denom = denom << 1;
+                t = t << 1;
+        }
+
+        /* Intialize the result */
+        r = 0;
+
+        do {
+                /* Determine if there exists a positive remainder */
+                if ((num - denom) >= 0) {
+                        /* Accumlate t to the result and calculate a new remainder */
+                        num = num - denom;
+                        r = r + t;
+                }
+                /* Continue to shift denom and shift t down to 0 */
+                denom = denom >> 1;
+                t = t >> 1;
+        } while (t != 0);
+
+        return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 000000000000..367df75d4bb3
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_init.c
+*
+*  @brief   Low level CHIPC PLL configuration functions
+*
+*  @note
+*
+*   These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+    Calculation for NDIV_i to obtain VCO frequency
+    -----------------------------------------------
+
+        Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+        for Freq_vco = VCO_FREQ_MHz
+                Freq_ref = chipcHw_XTAL_FREQ_Hz
+                PLL_P1 = PLL_P2 = 1
+                and
+                PLL_NDIV_f = 0
+
+        We get:
+                PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+    -----------------------------------------------------------------
+                Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+                PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL2
+*
+*  This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+        uint32_t pllPreDivider2 = 0;
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+                pChipcHw->PLLConfig2 =
+                    chipcHw_REG_PLL_CONFIG_D_RESET |
+                    chipcHw_REG_PLL_CONFIG_A_RESET;
+
+                pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+                    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+                    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+                     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+                    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+                     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+                    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+                     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+                /* Enable CHIPC registers to control the PLL */
+                pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+                /* Set pre divider to get desired VCO frequency */
+                pChipcHw->PLLPreDivider2 = pllPreDivider2;
+                /* Set NDIV Frac */
+                pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+                /* This has to be removed once the default values are fixed for PLL2. */
+                pChipcHw->PLLControl12 = 0x38000700;
+                pChipcHw->PLLControl22 = 0x00000015;
+
+                /* Reset PLL2 */
+                if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+                        pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+                            chipcHw_REG_PLL_CONFIG_A_RESET |
+                            chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+                            chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+                } else {
+                        pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+                            chipcHw_REG_PLL_CONFIG_A_RESET |
+                            chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+                            chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+                }
+                REG_LOCAL_IRQ_RESTORE;
+        }
+
+        /* Insert certain amount of delay before deasserting ARESET. */
+        udelay(1);
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+                /* Remove analog reset and Power on the PLL */
+                pChipcHw->PLLConfig2 &=
+                    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+                      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+                REG_LOCAL_IRQ_RESTORE;
+
+        }
+
+        /* Wait until PLL is locked */
+        while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+                ;
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+                /* Remove digital reset */
+                pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+                REG_LOCAL_IRQ_RESTORE;
+        }
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL1
+*
+*  This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+        uint32_t pllPreDivider = 0;
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+
+                pChipcHw->PLLConfig =
+                    chipcHw_REG_PLL_CONFIG_D_RESET |
+                    chipcHw_REG_PLL_CONFIG_A_RESET;
+                /* Setting VCO frequency */
+                if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+                        pllPreDivider =
+                            chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+                            ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+                              1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+                            (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+                             chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+                            (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+                             chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+                } else {
+                        pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+                            chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+                            (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+                             chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+                            (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+                             chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+                            (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+                             chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+                }
+
+                /* Enable CHIPC registers to control the PLL */
+                pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+                /* Set pre divider to get desired VCO frequency */
+                pChipcHw->PLLPreDivider = pllPreDivider;
+                /* Set NDIV Frac */
+                if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+                        pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+                            chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+                } else {
+                        pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+                            chipcHw_REG_PLL_DIVIDER_NDIV_f;
+                }
+
+                /* Reset PLL1 */
+                if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+                        pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+                            chipcHw_REG_PLL_CONFIG_A_RESET |
+                            chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+                            chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+                } else {
+                        pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+                            chipcHw_REG_PLL_CONFIG_A_RESET |
+                            chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+                            chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+                }
+
+                REG_LOCAL_IRQ_RESTORE;
+
+                /* Insert certain amount of delay before deasserting ARESET. */
+                udelay(1);
+
+                {
+                        REG_LOCAL_IRQ_SAVE;
+                        /* Remove analog reset and Power on the PLL */
+                        pChipcHw->PLLConfig &=
+                            ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+                              chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+                        REG_LOCAL_IRQ_RESTORE;
+                }
+
+                /* Wait until PLL is locked */
+                while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+                       || !(pChipcHw->
+                            PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+                        ;
+
+                /* Remove digital reset */
+                {
+                        REG_LOCAL_IRQ_SAVE;
+                        pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+                        REG_LOCAL_IRQ_RESTORE;
+                }
+        }
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the chipc module
+*
+*  This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam       /*  [ IN ] Misc chip initialization parameter */
+    ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+        delay_init();
+#endif
+
+        /* Do not program PLL, when warm reset */
+        if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+                chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+                                   initParam->ssSupport);
+                chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+        } else {
+                /* Clear sticky bits */
+                chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+        }
+        /* Clear sticky bits */
+        chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+        /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+        pChipcHw->ACLKClock =
+            (pChipcHw->
+             ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+                                                                 armBusRatio &
+                                                                 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+        /* Set various core component frequencies. The order in which this is done is important for some. */
+        /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+        /* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
+        /* then VPM and RTBUS. */
+
+        chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+                                  initParam->busClockFreqHz *
+                                  initParam->armBusRatio);
+        chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+        chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+                                  initParam->busClockFreqHz *
+                                  initParam->vpmBusRatio);
+        chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+                                  initParam->busClockFreqHz *
+                                  initParam->ddrBusRatio);
+        chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+                                  initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 000000000000..2671d8896bbb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+*  @brief   warmReset
+*
+*  @note warmReset configures the clocks which are not reset back to the state
+*   required to execute on reset.  To do so we need to copy the code into internal
+*   memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+        int i = 0;
+        RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+        /* Disable all interrupts */
+        intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+        intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+        intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+                if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+                        chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+                }
+                /* Bypass the PLL clocks before reboot */
+                pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+                pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+                /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+                do {
+                        ((uint32_t *) MM_IO_BASE_ARAM)[i] =
+                            ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+                        i++;
+                } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);  /* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+                CSP_CACHE_FLUSH_ALL;
+
+                /* run the function from ARAM */
+                runFunc();
+
+                /* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+                REG_LOCAL_IRQ_RESTORE;
+        }
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop                                                            \n\t"
+                " nop                                                            \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+                " MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+                " BIC      r0,r0,#0xd                                            \n\t"
+                " MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+#endif
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+                " MOV      r2,#0x80000000                                        \n\t"
+                " LDR      r3,[r2,#8]                                            \n\t"
+                " ORR      r3,r3,#0x20000                                        \n\t"
+                " STR      r3,[r2,#8]                                            \n\t"
+
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+                " nop                                                            \n\t"
+/* Issue reset */
+                " MOV      r3,#0x2                                               \n\t"
+                " STR      r3,[r2,#0x80]                                         \n\t"
+/* End here */
+                " MOV      pc,pc                                                 \n\t");
+/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 000000000000..54ad964fe94c
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+*  @file    chipcHw_str.c
+*
+*  @brief   Contains strings which are useful to linux and csp
+*
+*  @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+        "GPIO",                 /* 0 */
+        "KeyPad",               /* 1 */
+        "I2C-Host",             /* 2 */
+        "SPI",                  /* 3 */
+        "Uart",                 /* 4 */
+        "LED-Mtx-P",            /* 5 */
+        "LED-Mtx-S",            /* 6 */
+        "SDIO-0",               /* 7 */
+        "SDIO-1",               /* 8 */
+        "PCM",                  /* 9 */
+        "I2S",                  /* 10 */
+        "ETM",                  /* 11 */
+        "Debug",                /* 12 */
+        "Misc",                 /* 13 */
+        "0xE",                  /* 14 */
+        "0xF",                  /* 15 */
+};
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+        if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+                return "";
+        }
+
+        return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 000000000000..fb1104fe56b2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 000000000000..7b9bac2d79a5
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.c
+*
+*  @brief   Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+*  @brief   Get maximum FIFO for a DMA channel
+*
+*  @return  Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle      /*   [ IN ] DMA Channel handle */
+    ) {
+        uint32_t val = 0;
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        dmacHw_MISC_t *pMiscReg =
+            (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+        switch (pCblk->channel) {
+        case 0:
+                val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+                break;
+        case 1:
+                val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+                break;
+        case 2:
+                val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+                break;
+        case 3:
+                val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+                break;
+        case 4:
+                val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+                break;
+        case 5:
+                val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+                break;
+        case 6:
+                val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+                break;
+        case 7:
+                val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+                break;
+        }
+
+        if (val <= 0x4) {
+                return 8 << val;
+        } else {
+                dmacHw_ASSERT(0);
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,    /*   [ IN ] DMA Channel handle */
+                             dmacHw_CONFIG_t *pConfig,  /*   [ IN ] Configuration settings */
+                             void *pDescriptor  /*   [ IN ] Descriptor buffer */
+    ) {
+        dmacHw_DESC_RING_t *pRing;
+        dmacHw_DESC_t *pProg;
+        dmacHw_CBLK_t *pCblk;
+
+        pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+        if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+                /* Not safe yet to program the channel */
+                return;
+        }
+
+        if (pCblk->varDataStarted) {
+                if (pCblk->descUpdated) {
+                        pCblk->descUpdated = 0;
+                        pProg =
+                            (dmacHw_DESC_t *) ((uint32_t)
+                                               dmacHw_REG_LLP(pCblk->module,
+                                                              pCblk->channel) +
+                                               pRing->virt2PhyOffset);
+
+                        /* Load descriptor if not loaded */
+                        if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+                                dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+                                               pProg->sar);
+                                dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+                                               pProg->dar);
+                                dmacHw_REG_CTL_LO(pCblk->module,
+                                                  pCblk->channel) =
+                                    pProg->ctl.lo;
+                                dmacHw_REG_CTL_HI(pCblk->module,
+                                                  pCblk->channel) =
+                                    pProg->ctl.hi;
+                        } else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+                                /* Return as end descriptor is processed */
+                                return;
+                        } else {
+                                dmacHw_ASSERT(0);
+                        }
+                } else {
+                        return;
+                }
+        } else {
+                if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+                        /* Do not make a single chain, rather process one descriptor at a time */
+                        pProg = pRing->pHead;
+                        /* Point to the next descriptor for next iteration */
+                        dmacHw_NEXT_DESC(pRing, pHead);
+                } else {
+                        /* Return if no more pending descriptor */
+                        if (pRing->pEnd == NULL) {
+                                return;
+                        }
+
+                        pProg = pRing->pProg;
+                        if (pConfig->transferMode ==
+                            dmacHw_TRANSFER_MODE_CONTINUOUS) {
+                                /* Make sure a complete ring can be formed */
+                                dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+                                              llp == pRing->pProg);
+                                /* Make sure pProg pointing to the pHead */
+                                dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+                                              pRing->pHead);
+                                /* Make a complete ring */
+                                do {
+                                        pRing->pProg->ctl.lo |=
+                                            (dmacHw_REG_CTL_LLP_DST_EN |
+                                             dmacHw_REG_CTL_LLP_SRC_EN);
+                                        pRing->pProg =
+                                            (dmacHw_DESC_t *) pRing->pProg->llp;
+                                } while (pRing->pProg != pRing->pHead);
+                        } else {
+                                /* Make a single long chain */
+                                while (pRing->pProg != pRing->pEnd) {
+                                        pRing->pProg->ctl.lo |=
+                                            (dmacHw_REG_CTL_LLP_DST_EN |
+                                             dmacHw_REG_CTL_LLP_SRC_EN);
+                                        pRing->pProg =
+                                            (dmacHw_DESC_t *) pRing->pProg->llp;
+                                }
+                        }
+                }
+
+                /* Program the channel registers */
+                dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+                dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+                dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+                               (uint32_t) pProg - pRing->virt2PhyOffset);
+                dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+                    pProg->ctl.lo;
+                dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+                    pProg->ctl.hi;
+                if (pRing->pEnd) {
+                        /* Remember the descriptor to use next */
+                        pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+                }
+                /* Indicate no more pending descriptor  */
+                pRing->pEnd = (dmacHw_DESC_t *) NULL;
+        }
+        /* Start DMA operation */
+        dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+        uint32_t i = 0;
+
+        dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+        dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+        /* Enable access to the DMA block */
+        chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+        chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+        if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+                dmacHw_ASSERT(0);
+        }
+
+        memset((void *)dmacHw_gCblk, 0,
+               sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+        for (i = 0; i < dmaChannelCount_0; i++) {
+                dmacHw_gCblk[i].module = 0;
+                dmacHw_gCblk[i].channel = i;
+        }
+        for (i = 0; i < dmaChannelCount_1; i++) {
+                dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+                dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+        /* Disable access to the DMA block */
+        chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+        chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId   /* [ IN ] DMA Channel Id */
+    ) {
+        int idx;
+
+        switch ((channelId >> 8)) {
+        case 0:
+                dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+                idx = (channelId & 0xff);
+                break;
+        case 1:
+                dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+                idx = dmaChannelCount_0 + (channelId & 0xff);
+                break;
+        default:
+                dmacHw_ASSERT(0);
+                return (dmacHw_HANDLE_t) -1;
+        }
+
+        return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle   /*   [ IN ] DMA Channel handle */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        int module = pCblk->module;
+        int channel = pCblk->channel;
+
+        /* Reinitialize the control block */
+        memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+        pCblk->module = module;
+        pCblk->channel = channel;
+
+        /* Enable DMA controller */
+        dmacHw_DMA_ENABLE(pCblk->module);
+        /* Reset DMA channel */
+        dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+        dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+        dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+        dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+        /* Clear all raw interrupt status */
+        dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+        dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+        dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+        /* Mask event specific interrupts */
+        dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+        dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+        dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+        dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+        dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt  /* [ IN ] Number of descriptor in the ring */
+    ) {
+        /* Need extra 4 byte to ensure 32 bit alignment  */
+        return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+                sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+*       accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,        /*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+                          uint32_t descriptorPhyAddr,   /*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+                          uint32_t len, /*  [ IN ] Size of the pBuf */
+                          uint32_t num  /*  [ IN ] Number of descriptor in the ring */
+    ) {
+        uint32_t i;
+        dmacHw_DESC_RING_t *pRing;
+        dmacHw_DESC_t *pDesc;
+
+        /* Check the alignment of the descriptor */
+        if ((uint32_t) pDescriptorVirt & 0x00000003) {
+                dmacHw_ASSERT(0);
+                return -1;
+        }
+
+        /* Check if enough space has been allocated for descriptor ring */
+        if (len < dmacHw_descriptorLen(num)) {
+                return -1;
+        }
+
+        pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+        pRing->pHead =
+            (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+        pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+        pRing->pProg = dmacHw_DESC_INIT;
+        /* Initialize link item chain, starting from the head */
+        pDesc = pRing->pHead;
+        /* Find the offset between virtual to physical address */
+        pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+        /* Form the descriptor ring */
+        for (i = 0; i < num - 1; i++) {
+                /* Clear link list item */
+                memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+                /* Point to the next item in the physical address */
+                pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+                /* Point to the next item in the virtual address */
+                pDesc->llp = (uint32_t) (pDesc + 1);
+                /* Mark descriptor is ready to use */
+                pDesc->ctl.hi = dmacHw_DESC_FREE;
+                /* Look into next link list item */
+                pDesc++;
+        }
+
+        /* Clear last link list item */
+        memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+        /* Last item pointing to the first item in the
+           physical address to complete the ring */
+        pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+        /* Last item pointing to the first item in the
+           virtual address to complete the ring
+         */
+        pDesc->llp = (uint32_t) pRing->pHead;
+        /* Mark descriptor is ready to use */
+        pDesc->ctl.hi = dmacHw_DESC_FREE;
+        /* Set the number of descriptors in the ring */
+        pRing->num = num;
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,        /*   [ IN ] DMA Channel handle */
+                         dmacHw_CONFIG_t *pConfig       /*   [ IN ] Configuration settings */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        uint32_t cfgHigh = 0;
+        int srcTrSize;
+        int dstTrSize;
+
+        pCblk->varDataStarted = 0;
+        pCblk->userData = NULL;
+
+        /* Configure
+           - Burst transaction when enough data in available in FIFO
+           - AHB Access protection 1
+           - Source and destination peripheral ports
+         */
+        cfgHigh =
+            dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+            dmacHw_SRC_PERI_INTF(pConfig->
+                                 srcPeripheralPort) |
+            dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+        /* Set priority */
+        dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+                                    pConfig->channelPriority);
+
+        if (pConfig->dstStatusRegisterAddress != 0) {
+                /* Destination status update enable */
+                cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+                /* Configure status registers */
+                dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+                                   pConfig->dstStatusRegisterAddress);
+        }
+
+        if (pConfig->srcStatusRegisterAddress != 0) {
+                /* Source status update enable */
+                cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+                /* Source status update enable */
+                dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+                                   pConfig->srcStatusRegisterAddress);
+        }
+        /* Configure the config high register */
+        dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+        /* Clear all raw interrupt status */
+        dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+        dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+        dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+        /* Configure block interrupt */
+        if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+                dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+        } else {
+                dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+        }
+        /* Configure complete transfer interrupt */
+        if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+                dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+        } else {
+                dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+        }
+        /* Configure error interrupt */
+        if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+                dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+        } else {
+                dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+        }
+        /* Configure gather register */
+        if (pConfig->srcGatherWidth) {
+                srcTrSize =
+                    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+                if (!
+                    ((pConfig->srcGatherWidth % srcTrSize)
+                     && (pConfig->srcGatherJump % srcTrSize))) {
+                        dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+                            ((pConfig->srcGatherWidth /
+                              srcTrSize) << 20) | (pConfig->srcGatherJump /
+                                                   srcTrSize);
+                } else {
+                        return -1;
+                }
+        }
+        /* Configure scatter register */
+        if (pConfig->dstScatterWidth) {
+                dstTrSize =
+                    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+                if (!
+                    ((pConfig->dstScatterWidth % dstTrSize)
+                     && (pConfig->dstScatterJump % dstTrSize))) {
+                        dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+                            ((pConfig->dstScatterWidth /
+                              dstTrSize) << 20) | (pConfig->dstScatterJump /
+                                                   dstTrSize);
+                } else {
+                        return -1;
+                }
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle        /*   [ IN ] DMA Channel handle */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+                return dmacHw_TRANSFER_STATUS_BUSY;
+        } else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+                   (0x00000001 << pCblk->channel)) {
+                return dmacHw_TRANSFER_STATUS_ERROR;
+        }
+
+        return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,  /*   [ IN ] Configuration settings */
+                             void *pDescriptor, /*   [ IN ] Descriptor buffer */
+                             void *pSrcAddr,    /*   [ IN ] Source (Peripheral/Memory) address */
+                             void *pDstAddr,    /*   [ IN ] Destination (Peripheral/Memory) address */
+                             size_t dataLen     /*   [ IN ] Data length in bytes */
+    ) {
+        dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+        dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+        dmacHw_DESC_t *pStart;
+        dmacHw_DESC_t *pProg;
+        int srcTs = 0;
+        int blkTs = 0;
+        int oddSize = 0;
+        int descCount = 0;
+        int count = 0;
+        int dstTrSize = 0;
+        int srcTrSize = 0;
+        uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+        dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+        srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+        /* Skip Tx if buffer is NULL  or length is unknown */
+        if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+                /* Do not initiate transfer */
+                return -1;
+        }
+
+        /* Ensure scatter and gather are transaction aligned */
+        if ((pConfig->srcGatherWidth % srcTrSize)
+            || (pConfig->dstScatterWidth % dstTrSize)) {
+                return -2;
+        }
+
+        /*
+           Background 1: DMAC can not perform DMA if source and destination addresses are
+           not properly aligned with the channel's transaction width. So, for successful
+           DMA transfer, transaction width must be set according to the alignment of the
+           source and destination address.
+         */
+
+        /* Adjust destination transaction width if destination address is not aligned properly */
+        dstTrWidth = pConfig->dstMaxTransactionWidth;
+        while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+                dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+                dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+        }
+
+        /* Adjust source transaction width if source address is not aligned properly */
+        srcTrWidth = pConfig->srcMaxTransactionWidth;
+        while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+                srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+                srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+        }
+
+        /* Find the maximum transaction per descriptor */
+        if (pConfig->maxDataPerBlock
+            && ((pConfig->maxDataPerBlock / srcTrSize) <
+                dmacHw_MAX_BLOCKSIZE)) {
+                maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+        }
+
+        /* Find number of source transactions needed to complete the DMA transfer */
+        srcTs = dataLen / srcTrSize;
+        /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+        if (srcTs && (dstTrSize > srcTrSize)) {
+                oddSize = dataLen % dstTrSize;
+                /* Adjust source transaction count due to "oddSize" */
+                srcTs = srcTs - (oddSize / srcTrSize);
+        } else {
+                oddSize = dataLen % srcTrSize;
+        }
+        /* Adjust "descCount" due to "oddSize" */
+        if (oddSize) {
+                descCount++;
+        }
+        /* Find the number of descriptor needed for total "srcTs" */
+        if (srcTs) {
+                descCount += ((srcTs - 1) / maxBlockSize) + 1;
+        }
+
+        /* Check the availability of "descCount" discriptors in the ring */
+        pProg = pRing->pHead;
+        for (count = 0; (descCount <= pRing->num) && (count < descCount);
+             count++) {
+                if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+                        /* Sufficient descriptors are not available */
+                        return -3;
+                }
+                pProg = (dmacHw_DESC_t *) pProg->llp;
+        }
+
+        /* Remember the link list item to program the channel registers */
+        pStart = pProg = pRing->pHead;
+        /* Make a link list with "descCount(=count)" number of descriptors */
+        while (count) {
+                /* Reset channel control information */
+                pProg->ctl.lo = 0;
+                /* Enable source gather if configured */
+                if (pConfig->srcGatherWidth) {
+                        pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+                }
+                /* Enable destination scatter if configured */
+                if (pConfig->dstScatterWidth) {
+                        pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+                }
+                /* Set source and destination address */
+                pProg->sar = (uint32_t) pSrcAddr;
+                pProg->dar = (uint32_t) pDstAddr;
+                /* Use "devCtl" to mark that user memory need to be freed later if needed */
+                if (pProg == pRing->pHead) {
+                        pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+                } else {
+                        pProg->devCtl = 0;
+                }
+
+                blkTs = srcTs;
+
+                /* Special treatmeant for last descriptor */
+                if (count == 1) {
+                        /* Mark the last descriptor */
+                        pProg->ctl.lo &=
+                            ~(dmacHw_REG_CTL_LLP_DST_EN |
+                              dmacHw_REG_CTL_LLP_SRC_EN);
+                        /* Treatment for odd data bytes */
+                        if (oddSize) {
+                                /* Adjust for single byte transaction width */
+                                switch (pConfig->transferType) {
+                                case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+                                        dstTrWidth =
+                                            dmacHw_DST_TRANSACTION_WIDTH_8;
+                                        blkTs =
+                                            (oddSize / srcTrSize) +
+                                            ((oddSize % srcTrSize) ? 1 : 0);
+                                        break;
+                                case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+                                        srcTrWidth =
+                                            dmacHw_SRC_TRANSACTION_WIDTH_8;
+                                        blkTs = oddSize;
+                                        break;
+                                case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+                                        srcTrWidth =
+                                            dmacHw_SRC_TRANSACTION_WIDTH_8;
+                                        dstTrWidth =
+                                            dmacHw_DST_TRANSACTION_WIDTH_8;
+                                        blkTs = oddSize;
+                                        break;
+                                case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+                                        /* Do not adjust the transaction width  */
+                                        break;
+                                }
+                        } else {
+                                srcTs -= blkTs;
+                        }
+                } else {
+                        if (srcTs / maxBlockSize) {
+                                blkTs = maxBlockSize;
+                        }
+                        /* Remaining source transactions for next iteration */
+                        srcTs -= blkTs;
+                }
+                /* Must have a valid source transactions */
+                dmacHw_ASSERT(blkTs > 0);
+                /* Set control information */
+                if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+                        pProg->ctl.lo |= pConfig->transferType |
+                            pConfig->srcUpdate |
+                            pConfig->dstUpdate |
+                            srcTrWidth |
+                            dstTrWidth |
+                            pConfig->srcMaxBurstWidth |
+                            pConfig->dstMaxBurstWidth |
+                            pConfig->srcMasterInterface |
+                            pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+                } else {
+                        uint32_t transferType = 0;
+                        switch (pConfig->transferType) {
+                        case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+                                transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+                                break;
+                        case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+                                transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+                                break;
+                        default:
+                                dmacHw_ASSERT(0);
+                        }
+                        pProg->ctl.lo |= transferType |
+                            pConfig->srcUpdate |
+                            pConfig->dstUpdate |
+                            srcTrWidth |
+                            dstTrWidth |
+                            pConfig->srcMaxBurstWidth |
+                            pConfig->dstMaxBurstWidth |
+                            pConfig->srcMasterInterface |
+                            pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+                }
+
+                /* Set block transaction size */
+                pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+                /* Look for next descriptor */
+                if (count > 1) {
+                        /* Point to the next descriptor */
+                        pProg = (dmacHw_DESC_t *) pProg->llp;
+
+                        /* Update source and destination address for next iteration */
+                        switch (pConfig->transferType) {
+                        case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+                                if (pConfig->dstScatterWidth) {
+                                        pDstAddr =
+                                            (char *)pDstAddr +
+                                            blkTs * srcTrSize +
+                                            (((blkTs * srcTrSize) /
+                                              pConfig->dstScatterWidth) *
+                                             pConfig->dstScatterJump);
+                                } else {
+                                        pDstAddr =
+                                            (char *)pDstAddr +
+                                            blkTs * srcTrSize;
+                                }
+                                break;
+                        case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+                                if (pConfig->srcGatherWidth) {
+                                        pSrcAddr =
+                                            (char *)pDstAddr +
+                                            blkTs * srcTrSize +
+                                            (((blkTs * srcTrSize) /
+                                              pConfig->srcGatherWidth) *
+                                             pConfig->srcGatherJump);
+                                } else {
+                                        pSrcAddr =
+                                            (char *)pSrcAddr +
+                                            blkTs * srcTrSize;
+                                }
+                                break;
+                        case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+                                if (pConfig->dstScatterWidth) {
+                                        pDstAddr =
+                                            (char *)pDstAddr +
+                                            blkTs * srcTrSize +
+                                            (((blkTs * srcTrSize) /
+                                              pConfig->dstScatterWidth) *
+                                             pConfig->dstScatterJump);
+                                } else {
+                                        pDstAddr =
+                                            (char *)pDstAddr +
+                                            blkTs * srcTrSize;
+                                }
+
+                                if (pConfig->srcGatherWidth) {
+                                        pSrcAddr =
+                                            (char *)pDstAddr +
+                                            blkTs * srcTrSize +
+                                            (((blkTs * srcTrSize) /
+                                              pConfig->srcGatherWidth) *
+                                             pConfig->srcGatherJump);
+                                } else {
+                                        pSrcAddr =
+                                            (char *)pSrcAddr +
+                                            blkTs * srcTrSize;
+                                }
+                                break;
+                        case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+                                /* Do not adjust the address */
+                                break;
+                        default:
+                                dmacHw_ASSERT(0);
+                        }
+                } else {
+                        /* At the end of transfer "srcTs" must be zero */
+                        dmacHw_ASSERT(srcTs == 0);
+                }
+                count--;
+        }
+
+        /* Remember the descriptor to initialize the registers */
+        if (pRing->pProg == dmacHw_DESC_INIT) {
+                pRing->pProg = pStart;
+        }
+        /* Indicate that the descriptor is updated */
+        pRing->pEnd = pProg;
+        /* Head pointing to the next descriptor */
+        pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+        /* Update Tail pointer if destination is a peripheral,
+           because no one is going to read from the pTail
+         */
+        if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+                pRing->pTail = pRing->pHead;
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,       /*  [ IN ]  DMA Channel handle */
+                                          dmacHw_CONTROLLER_ATTRIB_e attr       /*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        switch (attr) {
+        case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+                return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+        case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+                return (1 <<
+                         (dmacHw_GET_MAX_BLOCK_SIZE
+                          (pCblk->module, pCblk->module) + 2)) - 8;
+        case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+                return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+        case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+                return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+                                                           pCblk->channel);
+        case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+                return GetFifoSize(handle);
+        }
+        dmacHw_ASSERT(0);
+        return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 000000000000..ff7b436d0935
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_extra.c
+*
+*  @brief   Extra Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];    /* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,     /*   [ IN ] Configuration settings */
+                          void *pDescriptor,    /*   [ IN ] Descriptor buffer */
+                          size_t dataLen        /*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display DMA registers
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module, /*   [ IN ] DMA Controller unit  (0-1) */
+                                    int channel,        /*   [ IN ] DMA Channel          (0-7) / -1(all) */
+                                    int (*fpPrint) (const char *, ...)  /*   [ IN ] Callback to the print function */
+    ) {
+        int chan;
+
+        (*fpPrint) ("Displaying register content \n\n");
+        (*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+        (*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+        (*fpPrint) ("--------------------------------------------------\n");
+        (*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+        (*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+        (*fpPrint) ("--------------------------------------------------\n");
+        (*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+        (*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+        (*fpPrint) ("--------------------------------------------------\n");
+        (*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+        (*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+        (*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+        (*fpPrint) ("--------------------------------------------------\n");
+        (*fpPrint) ("Module %d: SW source req                       0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+        (*fpPrint) ("Module %d: SW dest req                         0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+        (*fpPrint) ("Module %d: SW source signal                    0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+        (*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+        (*fpPrint) ("Module %d: SW source last                      0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+        (*fpPrint) ("Module %d: SW dest last                        0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+        (*fpPrint) ("--------------------------------------------------\n");
+        (*fpPrint) ("Module %d: misc config                         0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+        (*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+        (*fpPrint) ("Module %d: misc ID                             0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+        (*fpPrint) ("Module %d: misc test                           0x%X\n",
+                    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+        if (channel == -1) {
+                for (chan = 0; chan < 8; chan++) {
+                        (*fpPrint)
+                            ("--------------------------------------------------\n");
+                        (*fpPrint)
+                            ("Module %d: Channel %d Source                   0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_SAR(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Destination              0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_DAR(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d LLP                      0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_LLP(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Control (LO)             0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Control (HI)             0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Source Stats             0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Dest Stats               0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Config (LO)              0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+                        (*fpPrint)
+                            ("Module %d: Channel %d Config (HI)              0x%X\n",
+                             module, chan,
+                             (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+                }
+        } else {
+                chan = channel;
+                (*fpPrint)
+                    ("--------------------------------------------------\n");
+                (*fpPrint)
+                    ("Module %d: Channel %d Source                   0x%X\n",
+                     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Destination              0x%X\n",
+                     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d LLP                      0x%X\n",
+                     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Control (LO)             0x%X\n",
+                     module, chan,
+                     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Control (HI)             0x%X\n",
+                     module, chan,
+                     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Source Stats             0x%X\n",
+                     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Dest Stats               0x%X\n",
+                     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+                     module, chan,
+                     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+                     module, chan,
+                     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Config (LO)              0x%X\n",
+                     module, chan,
+                     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+                (*fpPrint)
+                    ("Module %d: Channel %d Config (HI)              0x%X\n",
+                     module, chan,
+                     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display descriptor ring
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor,  /*   [ IN ] Descriptor buffer */
+                            int (*fpPrint) (const char *, ...)  /*   [ IN ] Callback to the print function */
+    ) {
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+        dmacHw_DESC_t *pStart;
+
+        if (pRing->pHead == NULL) {
+                return;
+        }
+
+        pStart = pRing->pHead;
+
+        while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+                if (pStart == pRing->pHead) {
+                        (*fpPrint) ("Head\n");
+                }
+                if (pStart == pRing->pTail) {
+                        (*fpPrint) ("Tail\n");
+                }
+                if (pStart == pRing->pProg) {
+                        (*fpPrint) ("Prog\n");
+                }
+                if (pStart == pRing->pEnd) {
+                        (*fpPrint) ("End\n");
+                }
+                if (pStart == pRing->pFree) {
+                        (*fpPrint) ("Free\n");
+                }
+                (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+                (*fpPrint) ("sar    0x%0X\n", pStart->sar);
+                (*fpPrint) ("dar    0x%0X\n", pStart->dar);
+                (*fpPrint) ("llp    0x%0X\n", pStart->llp);
+                (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+                (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+                (*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+                (*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+                (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+                pStart = (dmacHw_DESC_t *) pStart->llp;
+        }
+        if (pStart == pRing->pHead) {
+                (*fpPrint) ("Head\n");
+        }
+        if (pStart == pRing->pTail) {
+                (*fpPrint) ("Tail\n");
+        }
+        if (pStart == pRing->pProg) {
+                (*fpPrint) ("Prog\n");
+        }
+        if (pStart == pRing->pEnd) {
+                (*fpPrint) ("End\n");
+        }
+        if (pStart == pRing->pFree) {
+                (*fpPrint) ("Free\n");
+        }
+        (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+        (*fpPrint) ("sar    0x%0X\n", pStart->sar);
+        (*fpPrint) ("dar    0x%0X\n", pStart->dar);
+        (*fpPrint) ("llp    0x%0X\n", pStart->llp);
+        (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+        (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+        (*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+        (*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+        (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check if DMA channel is the flow controller
+*
+*  @return  1 : If DMA is a flow controler
+*           0 : Peripheral is the flow controller
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor /*   [ IN ] Descriptor buffer */
+    ) {
+        uint32_t ttfc =
+            (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+            lo & dmacHw_REG_CTL_TTFC_MASK;
+
+        switch (ttfc) {
+        case dmacHw_REG_CTL_TTFC_MM_DMAC:
+        case dmacHw_REG_CTL_TTFC_MP_DMAC:
+        case dmacHw_REG_CTL_TTFC_PM_DMAC:
+        case dmacHw_REG_CTL_TTFC_PP_DMAC:
+                return 1;
+        }
+
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,     /*   [ IN ] Configuration settings */
+                          void *pDescriptor,    /*   [ IN ] Descriptor buffer */
+                          size_t dataLen        /*   [ IN ] Data length in bytes */
+    ) {
+        dmacHw_DESC_t *pProg;
+        dmacHw_DESC_t *pHead;
+        int srcTs = 0;
+        int srcTrSize = 0;
+
+        pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+        pProg = pHead;
+
+        srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+        srcTs = dataLen / srcTrSize;
+        do {
+                pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+                pProg = (dmacHw_DESC_t *) pProg->llp;
+        } while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*
+*  @return   void
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle       /* [ IN ] DMA Channel handle */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+        dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+        dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*
+*  @note
+*     Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle      /* [ IN ] DMA Channel handle */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+        if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+            ((0x00000001 << pCblk->channel))) {
+                status |= dmacHw_INTERRUPT_STATUS_TRANS;
+        }
+        if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+            ((0x00000001 << pCblk->channel))) {
+                status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+        }
+        if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+            ((0x00000001 << pCblk->channel))) {
+                status |= dmacHw_INTERRUPT_STATUS_ERROR;
+        }
+
+        return status;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+        uint32_t i;
+
+        for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+                if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+                     ((0x00000001 << dmacHw_gCblk[i].channel)))
+                    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+                        ((0x00000001 << dmacHw_gCblk[i].channel)))
+                    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+                        ((0x00000001 << dmacHw_gCblk[i].channel)))
+                    ) {
+                        return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+                }
+        }
+        return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,   /*   [ IN ] Configuration settings */
+                                    void *pSrcAddr,     /*   [ IN ] Source (Peripheral/Memory) address */
+                                    void *pDstAddr,     /*   [ IN ] Destination (Peripheral/Memory) address */
+                                    size_t dataLen      /*   [ IN ] Data length in bytes */
+    ) {
+        int srcTs = 0;
+        int oddSize = 0;
+        int descCount = 0;
+        int dstTrSize = 0;
+        int srcTrSize = 0;
+        uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+        dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+        dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+        dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+        srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+        /* Skip Tx if buffer is NULL  or length is unknown */
+        if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+                /* Do not initiate transfer */
+                return -1;
+        }
+
+        /* Ensure scatter and gather are transaction aligned */
+        if (pConfig->srcGatherWidth % srcTrSize
+            || pConfig->dstScatterWidth % dstTrSize) {
+                return -1;
+        }
+
+        /*
+           Background 1: DMAC can not perform DMA if source and destination addresses are
+           not properly aligned with the channel's transaction width. So, for successful
+           DMA transfer, transaction width must be set according to the alignment of the
+           source and destination address.
+         */
+
+        /* Adjust destination transaction width if destination address is not aligned properly */
+        dstTrWidth = pConfig->dstMaxTransactionWidth;
+        while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+                dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+                dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+        }
+
+        /* Adjust source transaction width if source address is not aligned properly */
+        srcTrWidth = pConfig->srcMaxTransactionWidth;
+        while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+                srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+                srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+        }
+
+        /* Find the maximum transaction per descriptor */
+        if (pConfig->maxDataPerBlock
+            && ((pConfig->maxDataPerBlock / srcTrSize) <
+                dmacHw_MAX_BLOCKSIZE)) {
+                maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+        }
+
+        /* Find number of source transactions needed to complete the DMA transfer */
+        srcTs = dataLen / srcTrSize;
+        /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+        if (srcTs && (dstTrSize > srcTrSize)) {
+                oddSize = dataLen % dstTrSize;
+                /* Adjust source transaction count due to "oddSize" */
+                srcTs = srcTs - (oddSize / srcTrSize);
+        } else {
+                oddSize = dataLen % srcTrSize;
+        }
+        /* Adjust "descCount" due to "oddSize" */
+        if (oddSize) {
+                descCount++;
+        }
+
+        /* Find the number of descriptor needed for total "srcTs" */
+        if (srcTs) {
+                descCount += ((srcTs - 1) / maxBlockSize) + 1;
+        }
+
+        return descCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,       /*   [ IN ] DMA Channel handle */
+                                  void *pDescriptor     /*   [ IN ] Descriptor buffer */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+        /* Make sure channel is not busy */
+        if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+                /* Check if pEnd is not processed */
+                if (pRing->pEnd) {
+                        /* Something left for processing */
+                        return 1;
+                }
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /*   [ IN ] DMA Channel handle */
+    ) {
+        dmacHw_CBLK_t *pCblk;
+
+        pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        /* Stop the channel */
+        dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  On failure : -1
+*           On success : Number of buffer freed
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,    /*   [ IN ] Configuration settings */
+                   void *pDescriptor,   /*   [ IN ] Descriptor buffer */
+                   void (*fpFree) (void *)      /*   [ IN ] Function pointer to free data memory */
+    ) {
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+        uint32_t count = 0;
+
+        if (fpFree == NULL) {
+                return -1;
+        }
+
+        while ((pRing->pFree != pRing->pTail)
+               && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+                if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+                        /* Identify, which memory to free */
+                        if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+                                (*fpFree) ((void *)pRing->pFree->dar);
+                        } else {
+                                /* Destination was a peripheral */
+                                (*fpFree) ((void *)pRing->pFree->sar);
+                        }
+                        /* Unmark user memory to indicate it is freed */
+                        pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+                }
+                dmacHw_NEXT_DESC(pRing, pFree);
+
+                count++;
+        }
+
+        return count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will update the discriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor updated
+*
+*
+*  @note
+*     Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,    /*   [ IN ] DMA Channel handle */
+                                     dmacHw_CONFIG_t *pConfig,  /*   [ IN ] Configuration settings */
+                                     void *pDescriptor, /*   [ IN ] Descriptor buffer */
+                                     uint32_t srcAddr,  /*   [ IN ] Source peripheral address */
+                                     void *(*fpAlloc) (int len),        /*   [ IN ] Function pointer  that provides destination memory */
+                                     int len,   /*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+                                     int num    /*   [ IN ] Number of descriptor to set */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+        dmacHw_DESC_t *pProg = NULL;
+        dmacHw_DESC_t *pLast = NULL;
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+        uint32_t dstAddr;
+        uint32_t controlParam;
+        int i;
+
+        dmacHw_ASSERT(pConfig->transferType ==
+                      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+        if (num > pRing->num) {
+                return -1;
+        }
+
+        pLast = pRing->pEnd;    /* Last descriptor updated */
+        pProg = pRing->pHead;   /* First descriptor in the new list */
+
+        controlParam = pConfig->srcUpdate |
+            pConfig->dstUpdate |
+            pConfig->srcMaxTransactionWidth |
+            pConfig->dstMaxTransactionWidth |
+            pConfig->srcMasterInterface |
+            pConfig->dstMasterInterface |
+            pConfig->srcMaxBurstWidth |
+            pConfig->dstMaxBurstWidth |
+            dmacHw_REG_CTL_TTFC_PM_PERI |
+            dmacHw_REG_CTL_LLP_DST_EN |
+            dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+        for (i = 0; i < num; i++) {
+                /* Allocate Rx buffer only for idle descriptor */
+                if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+                    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+                    ) {
+                        /* Rx descriptor is not idle */
+                        break;
+                }
+                /* Set source address */
+                pRing->pHead->sar = srcAddr;
+                if (fpAlloc) {
+                        /* Allocate memory for buffer in descriptor */
+                        dstAddr = (uint32_t) (*fpAlloc) (len);
+                        /* Check the destination address */
+                        if (dstAddr == 0) {
+                                if (i == 0) {
+                                        /* Not a single descriptor is available */
+                                        return -1;
+                                }
+                                break;
+                        }
+                        /* Set destination address */
+                        pRing->pHead->dar = dstAddr;
+                }
+                /* Set control information */
+                pRing->pHead->ctl.lo = controlParam;
+                /* Use "devCtl" to mark the memory that need to be freed later */
+                pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+                /* Descriptor is now owned by the channel */
+                pRing->pHead->ctl.hi = 0;
+                /* Remember the descriptor last updated */
+                pRing->pEnd = pRing->pHead;
+                /* Update next descriptor */
+                dmacHw_NEXT_DESC(pRing, pHead);
+        }
+
+        /* Mark the end of the list */
+        pRing->pEnd->ctl.lo &=
+            ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+        /* Connect the list */
+        if (pLast != pProg) {
+                pLast->ctl.lo |=
+                    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+        }
+        /* Mark the descriptors are updated */
+        pCblk->descUpdated = 1;
+        if (!pCblk->varDataStarted) {
+                /* LLP must be pointing to the first descriptor */
+                dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+                               (uint32_t) pProg - pRing->virt2PhyOffset);
+                /* Channel, handling variable data started */
+                pCblk->varDataStarted = 1;
+        }
+
+        return i;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMAed to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @param    handle     -
+*  @param    ppBbuf     -
+*  @param    pLen       -
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,  /*  [ IN ] DMA Channel handle */
+                               dmacHw_CONFIG_t *pConfig,        /*   [ IN ]  Configuration settings */
+                               void *pDescriptor,       /*   [ IN ] Descriptor buffer */
+                               void **ppBbuf,   /*   [ OUT ] Data received */
+                               size_t *pLlen    /*   [ OUT ] Length of the data received */
+    ) {
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+        (void)handle;
+
+        if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+                if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+                    (pRing->pTail == pRing->pHead)
+                    ) {
+                        /* No receive data available */
+                        *ppBbuf = (char *)NULL;
+                        *pLlen = 0;
+
+                        return 0;
+                }
+        }
+
+        /* Return read buffer and length */
+        *ppBbuf = (char *)pRing->pTail->dar;
+
+        /* Extract length of the received data */
+        if (DmaIsFlowController(pDescriptor)) {
+                uint32_t srcTrSize = 0;
+
+                switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+                case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+                        srcTrSize = 1;
+                        break;
+                case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+                        srcTrSize = 2;
+                        break;
+                case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+                        srcTrSize = 4;
+                        break;
+                case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+                        srcTrSize = 8;
+                        break;
+                default:
+                        dmacHw_ASSERT(0);
+                }
+                /* Calculate length from the block size */
+                *pLlen =
+                    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+                    srcTrSize;
+        } else {
+                /* Extract length from the source peripheral */
+                *pLlen = pRing->pTail->sstat;
+        }
+
+        /* Advance tail to next descriptor */
+        dmacHw_NEXT_DESC(pRing, pTail);
+
+        return 1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,       /*   [ IN ] Configuration settings */
+                                void *pDescriptor,      /*   [ IN ] Descriptor buffer */
+                                uint32_t ctlAddress,    /*   [ IN ] Address of the device control register */
+                                uint32_t control        /*   [ IN ] Device control information */
+    ) {
+        dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+        if (ctlAddress == 0) {
+                return -1;
+        }
+
+        /* Check the availability of descriptors in the ring */
+        if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+                return -1;
+        }
+        /* Set control information */
+        pRing->pHead->devCtl = control;
+        /* Set source and destination address */
+        pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+        pRing->pHead->dar = ctlAddress;
+        /* Set control parameters */
+        if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+                pRing->pHead->ctl.lo = pConfig->transferType |
+                    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+                    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+                    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+                    pConfig->dstMaxTransactionWidth |
+                    dmacHw_SRC_BURST_WIDTH_0 |
+                    dmacHw_DST_BURST_WIDTH_0 |
+                    pConfig->srcMasterInterface |
+                    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+        } else {
+                uint32_t transferType = 0;
+                switch (pConfig->transferType) {
+                case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+                        transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+                        break;
+                case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+                        transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+                        break;
+                default:
+                        dmacHw_ASSERT(0);
+                }
+                pRing->pHead->ctl.lo = transferType |
+                    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+                    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+                    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+                    pConfig->dstMaxTransactionWidth |
+                    dmacHw_SRC_BURST_WIDTH_0 |
+                    dmacHw_DST_BURST_WIDTH_0 |
+                    pConfig->srcMasterInterface |
+                    pConfig->dstMasterInterface |
+                    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+        }
+
+        /* Set block transaction size to one 32 bit transaction */
+        pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+        /* Remember the descriptor to initialize the registers */
+        if (pRing->pProg == dmacHw_DESC_INIT) {
+                pRing->pProg = pRing->pHead;
+        }
+        pRing->pEnd = pRing->pHead;
+
+        /* Advance the descriptor */
+        dmacHw_NEXT_DESC(pRing, pHead);
+
+        /* Update Tail pointer if destination is a peripheral */
+        if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+                pRing->pTail = pRing->pHead;
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,  /*  [ IN ] DMA Channel handle */
+                               void *userData   /*  [ IN ] User data */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle  /*  [ IN ] DMA Channel handle */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor    /*   [ IN ] Descriptor buffer  */
+    ) {
+        int i;
+        dmacHw_DESC_RING_t *pRing;
+        dmacHw_DESC_t *pDesc;
+
+        pRing = dmacHw_GET_DESC_RING(pDescriptor);
+        pDesc = pRing->pHead;
+
+        for (i = 0; i < pRing->num; i++) {
+                /* Mark descriptor is ready to use */
+                pDesc->ctl.hi = dmacHw_DESC_FREE;
+                /* Look into next link list item */
+                pDesc++;
+        }
+        pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+        pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,      /*  [ IN ] DMA Channel handle */
+                           void *pDescriptor,   /*   [ IN ] Descriptor buffer */
+                           int (*fpPrint) (const char *, ...)   /*  [ IN ] Print callback function */
+    ) {
+        dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+        DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+        DisplayDescRing(pDescriptor, fpPrint);
+}
diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 000000000000..244a61ab7697
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 000000000000..5c1c9a0e5ed2
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.c
+*
+*  @brief   Low level Timer driver routines
+*
+*  @note
+*
+*   These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC              (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+    __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,   /*  [ IN ] Timer Id */
+                                  tmrHw_CAPABILITY_e capability /*  [ IN ] Timer capability */
+) {
+        switch (capability) {
+        case tmrHw_CAPABILITY_CLOCK:
+                return (timerId <=
+                        1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+                    tmrHw_HIGH_RESOLUTION_CLOCK;
+        case tmrHw_CAPABILITY_RESOLUTION:
+                return 32;
+        default:
+                return 0;
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets a timer
+*
+*  This function initializes  timer
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId       /*  [ IN ] Timer Id */
+) {
+        /* Reset timer */
+        pTmrHw[timerId].LoadValue = 0;
+        pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+        pTmrHw[timerId].Control = 0;
+        pTmrHw[timerId].BackgroundLoad = 0;
+        /* Always configure as a 32 bit timer */
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+        /* Clear interrupt only if raw status interrupt is set */
+        if (pTmrHw[timerId].RawInterruptStatus) {
+                pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets counter value for an interval in ms
+*
+*  @return   On success: Effective counter value set
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,      /*  [ IN ] Timer Id */
+                                       tmrHw_INTERVAL_t msec    /*  [ IN ] Interval in milli-second */
+) {
+        uint32_t scale = 0;
+        uint32_t count = 0;
+
+        if (timerId == 0 || timerId == 1) {
+                if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+                        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+                        scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+                } else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+                        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+                        scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+                } else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+                        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+                        scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+                } else {
+                        return 0;
+                }
+
+                count = msec * scale;
+                /* Set counter value */
+                pTmrHw[timerId].LoadValue = count;
+                pTmrHw[timerId].BackgroundLoad = count;
+
+        } else if (timerId == 2 || timerId == 3) {
+                if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+                        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+                        scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+                } else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+                        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+                        scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+                } else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+                        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+                        scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+                } else {
+                        return 0;
+                }
+
+                count = msec * scale;
+                /* Set counter value */
+                pTmrHw[timerId].LoadValue = count;
+                pTmrHw[timerId].BackgroundLoad = count;
+        }
+        return count / scale;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,     /*  [ IN ] Timer Id */
+                                        tmrHw_RATE_t rate       /*  [ IN ] Number of timer interrupt per second */
+) {
+        uint32_t resolution = 0;
+        uint32_t count = 0;
+        ResetTimer(timerId);
+
+        /* Set timer mode periodic */
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+        pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+        /* Set timer in highest resolution */
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+        if (rate && (timerId == 0 || timerId == 1)) {
+                if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+                        return 0;
+                }
+                resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+        } else if (rate && (timerId == 2 || timerId == 3)) {
+                if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+                        return 0;
+                } else {
+                        resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+                }
+        } else {
+                return 0;
+        }
+        /* Find the counter value */
+        count = resolution / rate;
+        /* Set counter value */
+        pTmrHw[timerId].LoadValue = count;
+        pTmrHw[timerId].BackgroundLoad = count;
+
+        return resolution / count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,     /*  [ IN ] Timer Id */
+                                                tmrHw_INTERVAL_t msec   /*  [ IN ] Interval in milli-second */
+) {
+        ResetTimer(timerId);
+
+        /* Set timer mode periodic */
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+        pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+        return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,      /*  [ IN ] Timer Id */
+                                               tmrHw_INTERVAL_t msec    /*  [ IN ] Interval in milli-second */
+) {
+        ResetTimer(timerId);
+
+        /* Set timer mode oneshot */
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+        return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,      /*  [ IN ] Timer Id */
+                                       uint32_t divider /*  [ IN ] Dividing the clock frequency */
+) {
+        uint32_t scale = 0;
+
+        ResetTimer(timerId);
+        /* Set timer as free running mode */
+        pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+        pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+        if (divider >= 64) {
+                pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+                scale = 256;
+        } else if (divider >= 8) {
+                pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+                scale = 16;
+        } else {
+                pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+                scale = 1;
+        }
+
+        if (timerId == 0 || timerId == 1) {
+                return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+        } else if (timerId == 2 || timerId == 3) {
+                return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+        }
+
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /*  [ IN ] Timer id */
+) {
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId  /*  [ IN ] Timer id */
+) {
+        pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId       /*  [ IN ] Timer id */
+) {
+        /* return 32 bit timer value */
+        switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+        case tmrHw_CONTROL_FREE_RUNNING:
+                if (pTmrHw[timerId].CurrentValue) {
+                        return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+                }
+                break;
+        case tmrHw_CONTROL_PERIODIC:
+        case tmrHw_CONTROL_ONESHOT:
+                return pTmrHw[timerId].BackgroundLoad -
+                    pTmrHw[timerId].CurrentValue;
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId      /*  [ IN ] Timer id */
+) {
+        uint32_t divider = 0;
+
+        switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+        case tmrHw_CONTROL_PRESCALE_1:
+                divider = 1;
+                break;
+        case tmrHw_CONTROL_PRESCALE_16:
+                divider = 16;
+                break;
+        case tmrHw_CONTROL_PRESCALE_256:
+                divider = 256;
+                break;
+        default:
+                tmrHw_ASSERT(0);
+        }
+
+        if (timerId == 0 || timerId == 1) {
+                return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+        } else {
+                return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+        }
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId   /*  [ IN ] Timer id */
+) {
+        pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId  /*  [ IN ] Timer id */
+) {
+        pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId    /*  [ IN ] Timer id */
+) {
+        pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId    /*  [ IN ] Timer id */
+) {
+        if (pTmrHw[timerId].InterruptStatus) {
+                return tmrHw_INTERRUPT_STATUS_SET;
+        } else {
+                return tmrHw_INTERRUPT_STATUS_UNSET;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void        /*  void */
+) {
+        int i;
+
+        for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+                if (pTmrHw[i].InterruptStatus) {
+                        return i;
+                }
+        }
+
+        return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,   /*  [ IN ] Timer id */
+                          int (*fpPrint) (const char *, ...)    /*  [ IN ] Print callback function */
+) {
+        (*fpPrint) ("Displaying register contents \n\n");
+        (*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
+                    pTmrHw[timerId].LoadValue);
+        (*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
+                    pTmrHw[timerId].BackgroundLoad);
+        (*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
+                    pTmrHw[timerId].Control);
+        (*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
+                    pTmrHw[timerId].InterruptClear);
+        (*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+                    pTmrHw[timerId].RawInterruptStatus);
+        (*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
+                    pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,   /*  [ IN ] Timer id */
+                  unsigned long usecs /*  [ IN ] usec to delay */
+) {
+        tmrHw_RATE_t usec_tick_rate;
+        tmrHw_COUNT_t start_time;
+        tmrHw_COUNT_t delta_time;
+
+        start_time = tmrHw_GetCurrentCount(timerId);
+        usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+        delta_time = usecs * usec_tick_rate;
+
+        /* Busy wait */
+        while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+                ;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+        int r;
+        int t = 1;
+
+        /* Shift denom and t up to the largest value to optimize algorithm */
+        /* t contains the units of each divide */
+        while ((denom & 0x40000000) == 0) {     /* fails if denom=0 */
+                denom = denom << 1;
+                t = t << 1;
+        }
+
+        /* Intialize the result */
+        r = 0;
+
+        do {
+                /* Determine if there exists a positive remainder */
+                if ((num - denom) >= 0) {
+                        /* Accumlate t to the result and calculate a new remainder */
+                        num = num - denom;
+                        r = r + t;
+                }
+                /* Continue to shift denom and shift t down to 0 */
+                denom = denom >> 1;
+                t = t >> 1;
+        } while (t != 0);
+        return r;
+}
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 000000000000..7b20fccb9d4e
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.c
+*
+*   @brief  Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG   0
+
+#if DMA_MAP_DEBUG
+#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
+#else
+#   define  DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions  ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+                                  int count, int *eof, void *data)
+{
+        int len = 0;
+
+        len += sprintf(buf + len, "dma_map_mem statistics\n");
+        len +=
+            sprintf(buf + len, "coherent: %d\n",
+                    atomic_read(&gDmaStatMemTypeCoherent));
+        len +=
+            sprintf(buf + len, "kmalloc:  %d\n",
+                    atomic_read(&gDmaStatMemTypeKmalloc));
+        len +=
+            sprintf(buf + len, "vmalloc:  %d\n",
+                    atomic_read(&gDmaStatMemTypeVmalloc));
+        len +=
+            sprintf(buf + len, "user:     %d\n",
+                    atomic_read(&gDmaStatMemTypeUser));
+
+        return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+                                  int count, int *eof, void *data)
+{
+        int controllerIdx;
+        int channelIdx;
+        int limit = count - 200;
+        int len = 0;
+        DMA_Channel_t *channel;
+
+        if (down_interruptible(&gDMA.lock) < 0) {
+                return -ERESTARTSYS;
+        }
+
+        for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+             controllerIdx++) {
+                for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+                     channelIdx++) {
+                        if (len >= limit) {
+                                break;
+                        }
+
+                        channel =
+                            &gDMA.controller[controllerIdx].channel[channelIdx];
+
+                        len +=
+                            sprintf(buf + len, "%d:%d ", controllerIdx,
+                                    channelIdx);
+
+                        if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+                            0) {
+                                len +=
+                                    sprintf(buf + len, "Dedicated for %s ",
+                                            DMA_gDeviceAttribute[channel->
+                                                                 devType].name);
+                        } else {
+                                len += sprintf(buf + len, "Shared ");
+                        }
+
+                        if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+                                len += sprintf(buf + len, "No ISR ");
+                        }
+
+                        if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+                                len += sprintf(buf + len, "Fifo: 128 ");
+                        } else {
+                                len += sprintf(buf + len, "Fifo: 64  ");
+                        }
+
+                        if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+                                len +=
+                                    sprintf(buf + len, "InUse by %s",
+                                            DMA_gDeviceAttribute[channel->
+                                                                 devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+                                len +=
+                                    sprintf(buf + len, " (%s:%d)",
+                                            channel->fileName,
+                                            channel->lineNum);
+#endif
+                        } else {
+                                len += sprintf(buf + len, "Avail ");
+                        }
+
+                        if (channel->lastDevType != DMA_DEVICE_NONE) {
+                                len +=
+                                    sprintf(buf + len, "Last use: %s ",
+                                            DMA_gDeviceAttribute[channel->
+                                                                 lastDevType].
+                                            name);
+                        }
+
+                        len += sprintf(buf + len, "\n");
+                }
+        }
+        up(&gDMA.lock);
+        *eof = 1;
+
+        return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+                                 int count, int *eof, void *data)
+{
+        int limit = count - 200;
+        int len = 0;
+        int devIdx;
+
+        if (down_interruptible(&gDMA.lock) < 0) {
+                return -ERESTARTSYS;
+        }
+
+        for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+                DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+                if (devAttr->name == NULL) {
+                        continue;
+                }
+
+                if (len >= limit) {
+                        break;
+                }
+
+                len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+                if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+                        len +=
+                            sprintf(buf + len, "Dedicated %d:%d ",
+                                    devAttr->dedicatedController,
+                                    devAttr->dedicatedChannel);
+                } else {
+                        len += sprintf(buf + len, "Shared DMA:");
+                        if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+                                len += sprintf(buf + len, "0");
+                        }
+                        if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+                                len += sprintf(buf + len, "1");
+                        }
+                        len += sprintf(buf + len, " ");
+                }
+                if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+                        len += sprintf(buf + len, "NoISR ");
+                }
+                if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+                        len += sprintf(buf + len, "Allow-128 ");
+                }
+
+                len +=
+                    sprintf(buf + len,
+                            "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+                            devAttr->numTransfers, devAttr->transferTicks,
+                            devAttr->transferBytes,
+                            devAttr->ring.bytesAllocated);
+
+        }
+
+        up(&gDMA.lock);
+        *eof = 1;
+
+        return len;
+}
+
+/****************************************************************************/
+/**
+*   Determines if a DMA_Device_t is "valid".
+*
+*   @return
+*       TRUE        - dma device is valid
+*       FALSE       - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+        return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+*   Translates a DMA handle into a pointer to a channel.
+*
+*   @return
+*       non-NULL    - pointer to DMA_Channel_t
+*       NULL        - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+        int controllerIdx;
+        int channelIdx;
+
+        controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+        channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+        if ((controllerIdx > DMA_NUM_CONTROLLERS)
+            || (channelIdx > DMA_NUM_CHANNELS)) {
+                return NULL;
+        }
+        return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+*   Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+        int irqStatus;
+
+        channel = (DMA_Channel_t *) dev_id;
+
+        /* Figure out why we were called, and knock down the interrupt */
+
+        irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+        dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+        if ((channel->devType < 0)
+            || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+                printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+                       channel->devType);
+                return IRQ_NONE;
+        }
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+        /* Update stats */
+
+        if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+                devAttr->transferTicks +=
+                    (timer_get_tick_count() - devAttr->transferStartTime);
+        }
+
+        if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+                printk(KERN_ERR
+                       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+                       channel->devType, devAttr->name);
+        } else {
+                devAttr->numTransfers++;
+                devAttr->transferBytes += devAttr->numBytes;
+        }
+
+        /* Call any installed handler */
+
+        if (devAttr->devHandler != NULL) {
+                devAttr->devHandler(channel->devType, irqStatus,
+                                    devAttr->userData);
+        }
+
+        return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -EINVAL     Invalid parameters passed in
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,       /* Descriptor ring to populate */
+                              int numDescriptors        /* Number of descriptors that need to be allocated. */
+    ) {
+        size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+        if ((ring == NULL) || (numDescriptors <= 0)) {
+                return -EINVAL;
+        }
+
+        ring->physAddr = 0;
+        ring->descriptorsAllocated = 0;
+        ring->bytesAllocated = 0;
+
+        ring->virtAddr = dma_alloc_writecombine(NULL,
+                                                     bytesToAlloc,
+                                                     &ring->physAddr,
+                                                     GFP_KERNEL);
+        if (ring->virtAddr == NULL) {
+                return -ENOMEM;
+        }
+
+        ring->bytesAllocated = bytesToAlloc;
+        ring->descriptorsAllocated = numDescriptors;
+
+        return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring        /* Descriptor to release */
+    ) {
+        if (ring->virtAddr != NULL) {
+                dma_free_writecombine(NULL,
+                                      ring->bytesAllocated,
+                                      ring->virtAddr, ring->physAddr);
+        }
+
+        ring->bytesAllocated = 0;
+        ring->descriptorsAllocated = 0;
+        ring->virtAddr = NULL;
+        ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,        /* Descriptor ring to initialize */
+                             int numDescriptors /* Number of descriptors to initialize. */
+    ) {
+        if (ring->virtAddr == NULL) {
+                return -EINVAL;
+        }
+        if (dmacHw_initDescriptor(ring->virtAddr,
+                                  ring->physAddr,
+                                  ring->bytesAllocated, numDescriptors) < 0) {
+                printk(KERN_ERR
+                       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+                return -ENOMEM;
+        }
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -ENODEV - Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+                                   dma_addr_t srcData,  /* Place to get data to write to device */
+                                   dma_addr_t dstData,  /* Pointer to device data address */
+                                   size_t numBytes      /* Number of bytes to transfer to the device */
+    ) {
+        int numDescriptors;
+        DMA_DeviceAttribute_t *devAttr;
+
+        if (!IsDeviceValid(device)) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[device];
+
+        numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+                                                              (void *)srcData,
+                                                              (void *)dstData,
+                                                              numBytes);
+        if (numDescriptors < 0) {
+                printk(KERN_ERR
+                       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+                return -EINVAL;
+        }
+
+        return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,     /* Descriptor ring to add descriptors to */
+                        DMA_Device_t device,    /* DMA Device that descriptors are for */
+                        dma_addr_t srcData,     /* Place to get data (memory or device) */
+                        dma_addr_t dstData,     /* Place to put data (memory or device) */
+                        size_t numBytes /* Number of bytes to transfer to the device */
+    ) {
+        int rc;
+        DMA_DeviceAttribute_t *devAttr;
+
+        if (!IsDeviceValid(device)) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[device];
+
+        rc = dmacHw_setDataDescriptor(&devAttr->config,
+                                      ring->virtAddr,
+                                      (void *)srcData,
+                                      (void *)dstData, numBytes);
+        if (rc < 0) {
+                printk(KERN_ERR
+                       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+                       rc);
+                return -ENOMEM;
+        }
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+                                   DMA_DescriptorRing_t *ring   /* Descriptor ring to add descriptors to */
+    ) {
+        DMA_DeviceAttribute_t *devAttr;
+
+        if (!IsDeviceValid(device)) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[device];
+
+        /* Free the previously allocated descriptor ring */
+
+        dma_free_descriptor_ring(&devAttr->ring);
+
+        if (ring != NULL) {
+                /* Copy in the new one */
+
+                devAttr->ring = *ring;
+        }
+
+        /* Set things up so that if dma_transfer is called then this descriptor */
+        /* ring will get freed. */
+
+        devAttr->prevSrcData = 0;
+        devAttr->prevDstData = 0;
+        devAttr->prevNumBytes = 0;
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+                                   DMA_DescriptorRing_t *ring   /* Place to store retrieved ring */
+    ) {
+        DMA_DeviceAttribute_t *devAttr;
+
+        memset(ring, 0, sizeof(*ring));
+
+        if (!IsDeviceValid(device)) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[device];
+
+        *ring = devAttr->ring;
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Configures a DMA channel.
+*
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+        int controllerIdx;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+        controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+        if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+                if (devAttr->config.transferType ==
+                    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+                        devAttr->config.dstPeripheralPort =
+                            devAttr->dmacPort[controllerIdx];
+                } else if (devAttr->config.transferType ==
+                           dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+                        devAttr->config.srcPeripheralPort =
+                            devAttr->dmacPort[controllerIdx];
+                }
+        }
+
+        if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+                printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+                return -EIO;
+        }
+
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*   Intializes all of the data structures associated with the DMA.
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+        int rc = 0;
+        int controllerIdx;
+        int channelIdx;
+        DMA_Device_t devIdx;
+        DMA_Channel_t *channel;
+        DMA_Handle_t dedicatedHandle;
+
+        memset(&gDMA, 0, sizeof(gDMA));
+
+        init_MUTEX_LOCKED(&gDMA.lock);
+        init_waitqueue_head(&gDMA.freeChannelQ);
+
+        /* Initialize the Hardware */
+
+        dmacHw_initDma();
+
+        /* Start off by marking all of the DMA channels as shared. */
+
+        for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+             controllerIdx++) {
+                for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+                     channelIdx++) {
+                        channel =
+                            &gDMA.controller[controllerIdx].channel[channelIdx];
+
+                        channel->flags = 0;
+                        channel->devType = DMA_DEVICE_NONE;
+                        channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+                        channel->fileName = "";
+                        channel->lineNum = 0;
+#endif
+
+                        channel->dmacHwHandle =
+                            dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+                                                    (controllerIdx,
+                                                     channelIdx));
+                        dmacHw_initChannel(channel->dmacHwHandle);
+                }
+        }
+
+        /* Record any special attributes that channels may have */
+
+        gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+        gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+        gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+        gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+        /* Now walk through and record the dedicated channels. */
+
+        for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+                DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+                if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+                    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+                        printk(KERN_ERR
+                               "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+                               devAttr->name);
+                        rc = -EINVAL;
+                        goto out;
+                }
+
+                if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+                        /* This is a dedicated device. Mark the channel as being reserved. */
+
+                        if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+                                printk(KERN_ERR
+                                       "DMA Device: %s DMA Controller %d is out of range\n",
+                                       devAttr->name,
+                                       devAttr->dedicatedController);
+                                rc = -EINVAL;
+                                goto out;
+                        }
+
+                        if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+                                printk(KERN_ERR
+                                       "DMA Device: %s DMA Channel %d is out of range\n",
+                                       devAttr->name,
+                                       devAttr->dedicatedChannel);
+                                rc = -EINVAL;
+                                goto out;
+                        }
+
+                        dedicatedHandle =
+                            MAKE_HANDLE(devAttr->dedicatedController,
+                                        devAttr->dedicatedChannel);
+                        channel = HandleToChannel(dedicatedHandle);
+
+                        if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+                            0) {
+                                printk
+                                    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+                                     devAttr->name,
+                                     devAttr->dedicatedController,
+                                     devAttr->dedicatedChannel,
+                                     DMA_gDeviceAttribute[channel->devType].
+                                     name);
+                                rc = -EBUSY;
+                                goto out;
+                        }
+
+                        channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+                        channel->devType = devIdx;
+
+                        if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+                                channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+                        }
+
+                        /* For dedicated channels, we can go ahead and configure the DMA channel now */
+                        /* as well. */
+
+                        ConfigChannel(dedicatedHandle);
+                }
+        }
+
+        /* Go through and register the interrupt handlers */
+
+        for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+             controllerIdx++) {
+                for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+                     channelIdx++) {
+                        channel =
+                            &gDMA.controller[controllerIdx].channel[channelIdx];
+
+                        if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+                                snprintf(channel->name, sizeof(channel->name),
+                                         "dma %d:%d %s", controllerIdx,
+                                         channelIdx,
+                                         channel->devType ==
+                                         DMA_DEVICE_NONE ? "" :
+                                         DMA_gDeviceAttribute[channel->devType].
+                                         name);
+
+                                rc =
+                                     request_irq(IRQ_DMA0C0 +
+                                                 (controllerIdx *
+                                                  DMA_NUM_CHANNELS) +
+                                                 channelIdx,
+                                                 dma_interrupt_handler,
+                                                 IRQF_DISABLED, channel->name,
+                                                 channel);
+                                if (rc != 0) {
+                                        printk(KERN_ERR
+                                               "request_irq for IRQ_DMA%dC%d failed\n",
+                                               controllerIdx, channelIdx);
+                                }
+                        }
+                }
+        }
+
+        /* Create /proc/dma/channels and /proc/dma/devices */
+
+        gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+        if (gDmaDir == NULL) {
+                printk(KERN_ERR "Unable to create /proc/dma\n");
+        } else {
+                create_proc_read_entry("channels", 0, gDmaDir,
+                                       dma_proc_read_channels, NULL);
+                create_proc_read_entry("devices", 0, gDmaDir,
+                                       dma_proc_read_devices, NULL);
+                create_proc_read_entry("mem-type", 0, gDmaDir,
+                                       dma_proc_read_mem_type, NULL);
+        }
+
+out:
+
+        up(&gDMA.lock);
+
+        return rc;
+}
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+    (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+        DMA_Handle_t handle;
+        DMA_DeviceAttribute_t *devAttr;
+        DMA_Channel_t *channel;
+        int controllerIdx;
+        int controllerIdx2;
+        int channelIdx;
+
+        if (down_interruptible(&gDMA.lock) < 0) {
+                return -ERESTARTSYS;
+        }
+
+        if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+                handle = -ENODEV;
+                goto out;
+        }
+        devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+        {
+                char *s;
+
+                s = strrchr(fileName, '/');
+                if (s != NULL) {
+                        fileName = s + 1;
+                }
+        }
+#endif
+        if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+                /* This device has already been requested and not been freed */
+
+                printk(KERN_ERR "%s: device %s is already requested\n",
+                       __func__, devAttr->name);
+                handle = -EBUSY;
+                goto out;
+        }
+
+        if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+                /* This device has a dedicated channel. */
+
+                channel =
+                    &gDMA.controller[devAttr->dedicatedController].
+                    channel[devAttr->dedicatedChannel];
+                if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+                        handle = -EBUSY;
+                        goto out;
+                }
+
+                channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+                devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+                channel->fileName = fileName;
+                channel->lineNum = lineNum;
+#endif
+                handle =
+                    MAKE_HANDLE(devAttr->dedicatedController,
+                                devAttr->dedicatedChannel);
+                goto out;
+        }
+
+        /* This device needs to use one of the shared channels. */
+
+        handle = DMA_INVALID_HANDLE;
+        while (handle == DMA_INVALID_HANDLE) {
+                /* Scan through the shared channels and see if one is available */
+
+                for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+                     controllerIdx2++) {
+                        /* Check to see if we should try on controller 1 first. */
+
+                        controllerIdx = controllerIdx2;
+                        if ((devAttr->
+                             flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+                                controllerIdx = 1 - controllerIdx;
+                        }
+
+                        /* See if the device is available on the controller being tested */
+
+                        if ((devAttr->
+                             flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+                            != 0) {
+                                for (channelIdx = 0;
+                                     channelIdx < DMA_NUM_CHANNELS;
+                                     channelIdx++) {
+                                        channel =
+                                            &gDMA.controller[controllerIdx].
+                                            channel[channelIdx];
+
+                                        if (((channel->
+                                              flags &
+                                              DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+                                             0)
+                                            &&
+                                            ((channel->
+                                              flags & DMA_CHANNEL_FLAG_IN_USE)
+                                             == 0)) {
+                                                if (((channel->
+                                                      flags &
+                                                      DMA_CHANNEL_FLAG_LARGE_FIFO)
+                                                     != 0)
+                                                    &&
+                                                    ((devAttr->
+                                                      flags &
+                                                      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+                                                     == 0)) {
+                                                        /* This channel is a large fifo - don't tie it up */
+                                                        /* with devices that we don't want using it. */
+
+                                                        continue;
+                                                }
+
+                                                channel->flags |=
+                                                    DMA_CHANNEL_FLAG_IN_USE;
+                                                channel->devType = dev;
+                                                devAttr->flags |=
+                                                    DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+                                                channel->fileName = fileName;
+                                                channel->lineNum = lineNum;
+#endif
+                                                handle =
+                                                    MAKE_HANDLE(controllerIdx,
+                                                                channelIdx);
+
+                                                /* Now that we've reserved the channel - we can go ahead and configure it */
+
+                                                if (ConfigChannel(handle) != 0) {
+                                                        handle = -EIO;
+                                                        printk(KERN_ERR
+                                                               "dma_request_channel: ConfigChannel failed\n");
+                                                }
+                                                goto out;
+                                        }
+                                }
+                        }
+                }
+
+                /* No channels are currently available. Let's wait for one to free up. */
+
+                {
+                        DEFINE_WAIT(wait);
+
+                        prepare_to_wait(&gDMA.freeChannelQ, &wait,
+                                        TASK_INTERRUPTIBLE);
+                        up(&gDMA.lock);
+                        schedule();
+                        finish_wait(&gDMA.freeChannelQ, &wait);
+
+                        if (signal_pending(current)) {
+                                /* We don't currently hold gDMA.lock, so we return directly */
+
+                                return -ERESTARTSYS;
+                        }
+                }
+
+                if (down_interruptible(&gDMA.lock)) {
+                        return -ERESTARTSYS;
+                }
+        }
+
+out:
+        up(&gDMA.lock);
+
+        return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+        return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle        /* DMA handle. */
+    ) {
+        int rc = 0;
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+
+        if (down_interruptible(&gDMA.lock) < 0) {
+                return -ERESTARTSYS;
+        }
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                rc = -EINVAL;
+                goto out;
+        }
+
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+        if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+                channel->lastDevType = channel->devType;
+                channel->devType = DMA_DEVICE_NONE;
+        }
+        channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+        devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+        up(&gDMA.lock);
+
+        wake_up_interruptible(&gDMA.freeChannelQ);
+
+        return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return
+*       0           Device uses a dedicated channel
+*       > zero      Device uses a shared channel
+*       < zero      Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device    /* Device to check. */
+    ) {
+        DMA_DeviceAttribute_t *devAttr;
+
+        if (!IsDeviceValid(device)) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[device];
+
+        return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,  /* DMA Handle */
+                          dmacHw_TRANSFER_TYPE_e transferType,  /* Type of transfer being performed */
+                          dma_addr_t srcData,   /* Place to get data to write to device */
+                          dma_addr_t dstData,   /* Pointer to device data address */
+                          size_t numBytes       /* Number of bytes to transfer to the device */
+    ) {
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+        int numDescriptors;
+        size_t ringBytesRequired;
+        int rc = 0;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+        if (devAttr->config.transferType != transferType) {
+                return -EINVAL;
+        }
+
+        /* Figure out how many descriptors we need. */
+
+        /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+        /*        srcData, dstData, numBytes); */
+
+        numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+                                                              (void *)srcData,
+                                                              (void *)dstData,
+                                                              numBytes);
+        if (numDescriptors < 0) {
+                printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+                       __func__);
+                return -EINVAL;
+        }
+
+        /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+        /* a new one. */
+
+        ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+        /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+        if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+                /* Make sure that this code path is never taken from interrupt context. */
+                /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+                /* allocation needs to have already been done. */
+
+                might_sleep();
+
+                /* Free the old descriptor ring and allocate a new one. */
+
+                dma_free_descriptor_ring(&devAttr->ring);
+
+                /* And allocate a new one. */
+
+                rc =
+                     dma_alloc_descriptor_ring(&devAttr->ring,
+                                               numDescriptors);
+                if (rc < 0) {
+                        printk(KERN_ERR
+                               "%s: dma_alloc_descriptor_ring(%d) failed\n",
+                               __func__, numDescriptors);
+                        return rc;
+                }
+                /* Setup the descriptor for this transfer */
+
+                if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+                                          devAttr->ring.physAddr,
+                                          devAttr->ring.bytesAllocated,
+                                          numDescriptors) < 0) {
+                        printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+                               __func__);
+                        return -EINVAL;
+                }
+        } else {
+                /* We've already got enough ring buffer allocated. All we need to do is reset */
+                /* any control information, just in case the previous DMA was stopped. */
+
+                dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+        }
+
+        /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+        /* as last time, then we don't need to call setDataDescriptor again. */
+
+        if (dmacHw_setDataDescriptor(&devAttr->config,
+                                     devAttr->ring.virtAddr,
+                                     (void *)srcData,
+                                     (void *)dstData, numBytes) < 0) {
+                printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+                       __func__);
+                return -EINVAL;
+        }
+
+        /* Remember the critical information for this transfer so that we can eliminate */
+        /* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+        devAttr->prevSrcData = srcData;
+        devAttr->prevDstData = dstData;
+        devAttr->prevNumBytes = numBytes;
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,       /* DMA Handle */
+                                     dma_addr_t srcData,        /* Physical address of source data */
+                                     dma_addr_t dstData1,       /* Physical address of first destination buffer */
+                                     dma_addr_t dstData2,       /* Physical address of second destination buffer */
+                                     size_t numBytes    /* Number of bytes in each destination buffer */
+    ) {
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+        int numDst1Descriptors;
+        int numDst2Descriptors;
+        int numDescriptors;
+        size_t ringBytesRequired;
+        int rc = 0;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+        /* Figure out how many descriptors we need. */
+
+        /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+        /*        srcData, dstData, numBytes); */
+
+        numDst1Descriptors =
+             dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+                                             (void *)dstData1, numBytes);
+        if (numDst1Descriptors < 0) {
+                return -EINVAL;
+        }
+        numDst2Descriptors =
+             dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+                                             (void *)dstData2, numBytes);
+        if (numDst2Descriptors < 0) {
+                return -EINVAL;
+        }
+        numDescriptors = numDst1Descriptors + numDst2Descriptors;
+        /* printk("numDescriptors: %d\n", numDescriptors); */
+
+        /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+        /* a new one. */
+
+        ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+        /* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+        if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+                /* Make sure that this code path is never taken from interrupt context. */
+                /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+                /* allocation needs to have already been done. */
+
+                might_sleep();
+
+                /* Free the old descriptor ring and allocate a new one. */
+
+                dma_free_descriptor_ring(&devAttr->ring);
+
+                /* And allocate a new one. */
+
+                rc =
+                     dma_alloc_descriptor_ring(&devAttr->ring,
+                                               numDescriptors);
+                if (rc < 0) {
+                        printk(KERN_ERR
+                               "%s: dma_alloc_descriptor_ring(%d) failed\n",
+                               __func__, ringBytesRequired);
+                        return rc;
+                }
+        }
+
+        /* Setup the descriptor for this transfer. Since this function is used with */
+        /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+        /* setDataDescriptor will keep trying to append onto the end. */
+
+        if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+                                  devAttr->ring.physAddr,
+                                  devAttr->ring.bytesAllocated,
+                                  numDescriptors) < 0) {
+                printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+                return -EINVAL;
+        }
+
+        /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+        /* as last time, then we don't need to call setDataDescriptor again. */
+
+        if (dmacHw_setDataDescriptor(&devAttr->config,
+                                     devAttr->ring.virtAddr,
+                                     (void *)srcData,
+                                     (void *)dstData1, numBytes) < 0) {
+                printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+                       __func__);
+                return -EINVAL;
+        }
+        if (dmacHw_setDataDescriptor(&devAttr->config,
+                                     devAttr->ring.virtAddr,
+                                     (void *)srcData,
+                                     (void *)dstData2, numBytes) < 0) {
+                printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+                       __func__);
+                return -EINVAL;
+        }
+
+        /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+        /* try to make the 'prev' variables right. */
+
+        devAttr->prevSrcData = 0;
+        devAttr->prevDstData = 0;
+        devAttr->prevNumBytes = 0;
+
+        return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+        dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+                                devAttr->ring.virtAddr);
+
+        /* Since we got this far, everything went successfully */
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+        DMA_Channel_t *channel;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+
+        dmacHw_stopTransfer(channel->dmacHwHandle);
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+        DMA_Channel_t *channel;
+        dmacHw_TRANSFER_STATUS_e status;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+
+        while ((status =
+                dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+               dmacHw_TRANSFER_STATUS_BUSY) {
+                ;
+        }
+
+        if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+                printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+                return -EIO;
+        }
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA, allocating the descriptors as required.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,   /* DMA Handle */
+                 dmacHw_TRANSFER_TYPE_e transferType,   /* Type of transfer being performed */
+                 dma_addr_t srcData,    /* Place to get data to write to device */
+                 dma_addr_t dstData,    /* Pointer to device data address */
+                 size_t numBytes        /* Number of bytes to transfer to the device */
+    ) {
+        DMA_Channel_t *channel;
+        DMA_DeviceAttribute_t *devAttr;
+        int rc = 0;
+
+        channel = HandleToChannel(handle);
+        if (channel == NULL) {
+                return -ENODEV;
+        }
+
+        devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+        if (devAttr->config.transferType != transferType) {
+                return -EINVAL;
+        }
+
+        /* We keep track of the information about the previous request for this */
+        /* device, and if the attributes match, then we can use the descriptors we setup */
+        /* the last time, and not have to reinitialize everything. */
+
+        {
+                rc =
+                     dma_alloc_descriptors(handle, transferType, srcData,
+                                           dstData, numBytes);
+                if (rc != 0) {
+                        return rc;
+                }
+        }
+
+        /* And kick off the transfer */
+
+        devAttr->numBytes = numBytes;
+        devAttr->transferStartTime = timer_get_tick_count();
+
+        dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+                                devAttr->ring.virtAddr);
+
+        /* Since we got this far, everything went successfully */
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,    /* Device to set the callback for. */
+                           DMA_DeviceHandler_t devHandler,      /* Function to call when the DMA completes */
+                           void *userData       /* Pointer which will be passed to devHandler. */
+    ) {
+        DMA_DeviceAttribute_t *devAttr;
+        unsigned long flags;
+
+        if (!IsDeviceValid(dev)) {
+                return -ENODEV;
+        }
+        devAttr = &DMA_gDeviceAttribute[dev];
+
+        local_irq_save(flags);
+
+        devAttr->userData = userData;
+        devAttr->devHandler = devHandler;
+
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+*   Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+        memset(memMap, 0, sizeof(*memMap));
+
+        init_MUTEX(&memMap->lock);
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+        down(&memMap->lock);    /* Just being paranoid */
+
+        /* Free up any allocated memory */
+
+        up(&memMap->lock);
+        memset(memMap, 0, sizeof(*memMap));
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+        unsigned long addrVal = (unsigned long)addr;
+
+        if (addrVal >= VMALLOC_END) {
+                /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+                /* dma_alloc_xxx pages are physically and virtually contiguous */
+
+                return DMA_MEM_TYPE_DMA;
+        }
+
+        /* Technically, we could add one more classification. Addresses between VMALLOC_END */
+        /* and the beginning of the DMA virtual address could be considered to be I/O space. */
+        /* Right now, nobody cares about this particular classification, so we ignore it. */
+
+        if (is_vmalloc_addr(addr)) {
+                /* Address comes from the vmalloc'd region. Pages are virtually */
+                /* contiguous but NOT physically contiguous */
+
+                return DMA_MEM_TYPE_VMALLOC;
+        }
+
+        if (addrVal >= PAGE_OFFSET) {
+                /* PAGE_OFFSET is typically 0xC0000000 */
+
+                /* kmalloc'd pages are physically contiguous */
+
+                return DMA_MEM_TYPE_KMALLOC;
+        }
+
+        return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+        DMA_MemType_t memType = dma_mem_type(addr);
+
+        return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+            || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+            || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+                  enum dma_data_direction dir   /* Direction that the mapping will be going */
+    ) {
+        int rc;
+
+        down(&memMap->lock);
+
+        DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+        if (memMap->inUse) {
+                printk(KERN_ERR "%s: memory map %p is already being used\n",
+                       __func__, memMap);
+                rc = -EBUSY;
+                goto out;
+        }
+
+        memMap->inUse = 1;
+        memMap->dir = dir;
+        memMap->numRegionsUsed = 0;
+
+        rc = 0;
+
+out:
+
+        DMA_MAP_PRINT("returning %d", rc);
+
+        up(&memMap->lock);
+
+        return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map. Each segment is both
+*   physically and virtually contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap,    /* Stores state information about the map */
+                               DMA_Region_t *region,    /* Region that the segment belongs to */
+                               void *virtAddr,  /* Virtual address of the segment being added */
+                               dma_addr_t physAddr,     /* Physical address of the segment being added */
+                               size_t numBytes  /* Number of bytes of the segment being added */
+    ) {
+        DMA_Segment_t *segment;
+
+        DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+                      physAddr, numBytes);
+
+        /* Sanity check */
+
+        if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+            || (((unsigned long)virtAddr + numBytes)) >
+            ((unsigned long)region->virtAddr + region->numBytes)) {
+                printk(KERN_ERR
+                       "%s: virtAddr %p is outside region @ %p len: %d\n",
+                       __func__, virtAddr, region->virtAddr, region->numBytes);
+                return -EINVAL;
+        }
+
+        if (region->numSegmentsUsed > 0) {
+                /* Check to see if this segment is physically contiguous with the previous one */
+
+                segment = &region->segment[region->numSegmentsUsed - 1];
+
+                if ((segment->physAddr + segment->numBytes) == physAddr) {
+                        /* It is - just add on to the end */
+
+                        DMA_MAP_PRINT("appending %d bytes to last segment\n",
+                                      numBytes);
+
+                        segment->numBytes += numBytes;
+
+                        return 0;
+                }
+        }
+
+        /* Reallocate to hold more segments, if required. */
+
+        if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+                DMA_Segment_t *newSegment;
+                size_t oldSize =
+                    region->numSegmentsAllocated * sizeof(*newSegment);
+                int newAlloc = region->numSegmentsAllocated + 4;
+                size_t newSize = newAlloc * sizeof(*newSegment);
+
+                newSegment = kmalloc(newSize, GFP_KERNEL);
+                if (newSegment == NULL) {
+                        return -ENOMEM;
+                }
+                memcpy(newSegment, region->segment, oldSize);
+                memset(&((uint8_t *) newSegment)[oldSize], 0,
+                       newSize - oldSize);
+                kfree(region->segment);
+
+                region->numSegmentsAllocated = newAlloc;
+                region->segment = newSegment;
+        }
+
+        segment = &region->segment[region->numSegmentsUsed];
+        region->numSegmentsUsed++;
+
+        segment->virtAddr = virtAddr;
+        segment->physAddr = physAddr;
+        segment->numBytes = numBytes;
+
+        DMA_MAP_PRINT("returning success\n");
+
+        return 0;
+}
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to a memory map. Each region is virtually
+*   contiguous, but not necessarily physically contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,    /* Stores state information about the map */
+                       void *mem,       /* Virtual address that we want to get a map of */
+                       size_t numBytes  /* Number of bytes being mapped */
+    ) {
+        unsigned long addr = (unsigned long)mem;
+        unsigned int offset;
+        int rc = 0;
+        DMA_Region_t *region;
+        dma_addr_t physAddr;
+
+        down(&memMap->lock);
+
+        DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+        if (!memMap->inUse) {
+                printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+                       __func__);
+                rc = -EINVAL;
+                goto out;
+        }
+
+        /* Reallocate to hold more regions. */
+
+        if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+                DMA_Region_t *newRegion;
+                size_t oldSize =
+                    memMap->numRegionsAllocated * sizeof(*newRegion);
+                int newAlloc = memMap->numRegionsAllocated + 4;
+                size_t newSize = newAlloc * sizeof(*newRegion);
+
+                newRegion = kmalloc(newSize, GFP_KERNEL);
+                if (newRegion == NULL) {
+                        rc = -ENOMEM;
+                        goto out;
+                }
+                memcpy(newRegion, memMap->region, oldSize);
+                memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+                kfree(memMap->region);
+
+                memMap->numRegionsAllocated = newAlloc;
+                memMap->region = newRegion;
+        }
+
+        region = &memMap->region[memMap->numRegionsUsed];
+        memMap->numRegionsUsed++;
+
+        offset = addr & ~PAGE_MASK;
+
+        region->memType = dma_mem_type(mem);
+        region->virtAddr = mem;
+        region->numBytes = numBytes;
+        region->numSegmentsUsed = 0;
+        region->numLockedPages = 0;
+        region->lockedPages = NULL;
+
+        switch (region->memType) {
+        case DMA_MEM_TYPE_VMALLOC:
+                {
+                        atomic_inc(&gDmaStatMemTypeVmalloc);
+
+                        /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+                        /* vmalloc'd pages are not physically contiguous */
+
+                        rc = -EINVAL;
+                        break;
+                }
+
+        case DMA_MEM_TYPE_KMALLOC:
+                {
+                        atomic_inc(&gDmaStatMemTypeKmalloc);
+
+                        /* kmalloc'd pages are physically contiguous, so they'll have exactly */
+                        /* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+                        physAddr =
+                            dma_map_single(NULL, mem, numBytes, memMap->dir);
+                        rc = dma_map_add_segment(memMap, region, mem, physAddr,
+                                                 numBytes);
+#else
+                        rc = -EINVAL;
+#endif
+                        break;
+                }
+
+        case DMA_MEM_TYPE_DMA:
+                {
+                        /* dma_alloc_xxx pages are physically contiguous */
+
+                        atomic_inc(&gDmaStatMemTypeCoherent);
+
+                        physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+                        dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+                                                memMap->dir);
+                        rc = dma_map_add_segment(memMap, region, mem, physAddr,
+                                                 numBytes);
+                        break;
+                }
+
+        case DMA_MEM_TYPE_USER:
+                {
+                        size_t firstPageOffset;
+                        size_t firstPageSize;
+                        struct page **pages;
+                        struct task_struct *userTask;
+
+                        atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+                        /* If the pages are user pages, then the dma_mem_map_set_user_task function */
+                        /* must have been previously called. */
+
+                        if (memMap->userTask == NULL) {
+                                printk(KERN_ERR
+                                       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+                                       __func__);
+                                return -EINVAL;
+                        }
+
+                        /* User pages need to be locked. */
+
+                        firstPageOffset =
+                            (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+                        firstPageSize = PAGE_SIZE - firstPageOffset;
+
+                        region->numLockedPages = (firstPageOffset
+                                                  + region->numBytes +
+                                                  PAGE_SIZE - 1) / PAGE_SIZE;
+                        pages =
+                            kmalloc(region->numLockedPages *
+                                    sizeof(struct page *), GFP_KERNEL);
+
+                        if (pages == NULL) {
+                                region->numLockedPages = 0;
+                                return -ENOMEM;
+                        }
+
+                        userTask = memMap->userTask;
+
+                        down_read(&userTask->mm->mmap_sem);
+                        rc = get_user_pages(userTask,   /* task */
+                                            userTask->mm,       /* mm */
+                                            (unsigned long)region->virtAddr,    /* start */
+                                            region->numLockedPages,     /* len */
+                                            memMap->dir == DMA_FROM_DEVICE,     /* write */
+                                            0,  /* force */
+                                            pages,      /* pages (array of pointers to page) */
+                                            NULL);      /* vmas */
+                        up_read(&userTask->mm->mmap_sem);
+
+                        if (rc != region->numLockedPages) {
+                                kfree(pages);
+                                region->numLockedPages = 0;
+
+                                if (rc >= 0) {
+                                        rc = -EINVAL;
+                                }
+                        } else {
+                                uint8_t *virtAddr = region->virtAddr;
+                                size_t bytesRemaining;
+                                int pageIdx;
+
+                                rc = 0; /* Since get_user_pages returns +ve number */
+
+                                region->lockedPages = pages;
+
+                                /* We've locked the user pages. Now we need to walk them and figure */
+                                /* out the physical addresses. */
+
+                                /* The first page may be partial */
+
+                                dma_map_add_segment(memMap,
+                                                    region,
+                                                    virtAddr,
+                                                    PFN_PHYS(page_to_pfn
+                                                             (pages[0])) +
+                                                    firstPageOffset,
+                                                    firstPageSize);
+
+                                virtAddr += firstPageSize;
+                                bytesRemaining =
+                                    region->numBytes - firstPageSize;
+
+                                for (pageIdx = 1;
+                                     pageIdx < region->numLockedPages;
+                                     pageIdx++) {
+                                        size_t bytesThisPage =
+                                            (bytesRemaining >
+                                             PAGE_SIZE ? PAGE_SIZE :
+                                             bytesRemaining);
+
+                                        DMA_MAP_PRINT
+                                            ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+                                             pageIdx, pages[pageIdx],
+                                             page_to_pfn(pages[pageIdx]),
+                                             PFN_PHYS(page_to_pfn
+                                                      (pages[pageIdx])));
+
+                                        dma_map_add_segment(memMap,
+                                                            region,
+                                                            virtAddr,
+                                                            PFN_PHYS(page_to_pfn
+                                                                     (pages
+                                                                      [pageIdx])),
+                                                            bytesThisPage);
+
+                                        virtAddr += bytesThisPage;
+                                        bytesRemaining -= bytesThisPage;
+                                }
+                        }
+#else
+                        printk(KERN_ERR
+                               "%s: User mode pages are not yet supported\n",
+                               __func__);
+
+                        /* user pages are not physically contiguous */
+
+                        rc = -EINVAL;
+#endif
+                        break;
+                }
+
+        default:
+                {
+                        printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+                               __func__, region->memType);
+
+                        rc = -EINVAL;
+                        break;
+                }
+        }
+
+        if (rc != 0) {
+                memMap->numRegionsUsed--;
+        }
+
+out:
+
+        DMA_MAP_PRINT("returning %d\n", rc);
+
+        up(&memMap->lock);
+
+        return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,   /* Stores state information about the map */
+                void *mem,      /* Virtual address that we want to get a map of */
+                size_t numBytes,        /* Number of bytes being mapped */
+                enum dma_data_direction dir     /* Direction that the mapping will be going */
+    ) {
+        int rc;
+
+        rc = dma_map_start(memMap, dir);
+        if (rc == 0) {
+                rc = dma_map_add_region(memMap, mem, numBytes);
+                if (rc < 0) {
+                        /* Since the add fails, this function will fail, and the caller won't */
+                        /* call unmap, so we need to do it here. */
+
+                        dma_unmap(memMap, 0);
+                }
+        }
+
+        return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+*   Setup a descriptor ring for a given memory map.
+*
+*   It is assumed that the descriptor ring has already been initialized, and
+*   this routine will only reallocate a new descriptor ring if the existing
+*   one is too small.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,    /* DMA device (where the ring is stored) */
+                                   DMA_MemMap_t *memMap,        /* Memory map that will be used */
+                                   dma_addr_t devPhysAddr       /* Physical address of device */
+    ) {
+        int rc;
+        int numDescriptors;
+        DMA_DeviceAttribute_t *devAttr;
+        DMA_Region_t *region;
+        DMA_Segment_t *segment;
+        dma_addr_t srcPhysAddr;
+        dma_addr_t dstPhysAddr;
+        int regionIdx;
+        int segmentIdx;
+
+        devAttr = &DMA_gDeviceAttribute[dev];
+
+        down(&memMap->lock);
+
+        /* Figure out how many descriptors we need */
+
+        numDescriptors = 0;
+        for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+                region = &memMap->region[regionIdx];
+
+                for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+                     segmentIdx++) {
+                        segment = &region->segment[segmentIdx];
+
+                        if (memMap->dir == DMA_TO_DEVICE) {
+                                srcPhysAddr = segment->physAddr;
+                                dstPhysAddr = devPhysAddr;
+                        } else {
+                                srcPhysAddr = devPhysAddr;
+                                dstPhysAddr = segment->physAddr;
+                        }
+
+                        rc =
+                             dma_calculate_descriptor_count(dev, srcPhysAddr,
+                                                            dstPhysAddr,
+                                                            segment->
+                                                            numBytes);
+                        if (rc < 0) {
+                                printk(KERN_ERR
+                                       "%s: dma_calculate_descriptor_count failed: %d\n",
+                                       __func__, rc);
+                                goto out;
+                        }
+                        numDescriptors += rc;
+                }
+        }
+
+        /* Adjust the size of the ring, if it isn't big enough */
+
+        if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+                dma_free_descriptor_ring(&devAttr->ring);
+                rc =
+                     dma_alloc_descriptor_ring(&devAttr->ring,
+                                               numDescriptors);
+                if (rc < 0) {
+                        printk(KERN_ERR
+                               "%s: dma_alloc_descriptor_ring failed: %d\n",
+                               __func__, rc);
+                        goto out;
+                }
+        } else {
+                rc =
+                     dma_init_descriptor_ring(&devAttr->ring,
+                                              numDescriptors);
+                if (rc < 0) {
+                        printk(KERN_ERR
+                               "%s: dma_init_descriptor_ring failed: %d\n",
+                               __func__, rc);
+                        goto out;
+                }
+        }
+
+        /* Populate the descriptors */
+
+        for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+                region = &memMap->region[regionIdx];
+
+                for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+                     segmentIdx++) {
+                        segment = &region->segment[segmentIdx];
+
+                        if (memMap->dir == DMA_TO_DEVICE) {
+                                srcPhysAddr = segment->physAddr;
+                                dstPhysAddr = devPhysAddr;
+                        } else {
+                                srcPhysAddr = devPhysAddr;
+                                dstPhysAddr = segment->physAddr;
+                        }
+
+                        rc =
+                             dma_add_descriptors(&devAttr->ring, dev,
+                                                 srcPhysAddr, dstPhysAddr,
+                                                 segment->numBytes);
+                        if (rc < 0) {
+                                printk(KERN_ERR
+                                       "%s: dma_add_descriptors failed: %d\n",
+                                       __func__, rc);
+                                goto out;
+                        }
+                }
+        }
+
+        rc = 0;
+
+out:
+
+        up(&memMap->lock);
+        return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,     /* Stores state information about the map */
+              int dirtied       /* non-zero if any of the pages were modified */
+    ) {
+        int regionIdx;
+        int segmentIdx;
+        DMA_Region_t *region;
+        DMA_Segment_t *segment;
+
+        for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+                region = &memMap->region[regionIdx];
+
+                for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+                     segmentIdx++) {
+                        segment = &region->segment[segmentIdx];
+
+                        switch (region->memType) {
+                        case DMA_MEM_TYPE_VMALLOC:
+                                {
+                                        printk(KERN_ERR
+                                               "%s: vmalloc'd pages are not yet supported\n",
+                                               __func__);
+                                        return -EINVAL;
+                                }
+
+                        case DMA_MEM_TYPE_KMALLOC:
+                                {
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+                                        dma_unmap_single(NULL,
+                                                         segment->physAddr,
+                                                         segment->numBytes,
+                                                         memMap->dir);
+#endif
+                                        break;
+                                }
+
+                        case DMA_MEM_TYPE_DMA:
+                                {
+                                        dma_sync_single_for_cpu(NULL,
+                                                                segment->
+                                                                physAddr,
+                                                                segment->
+                                                                numBytes,
+                                                                memMap->dir);
+                                        break;
+                                }
+
+                        case DMA_MEM_TYPE_USER:
+                                {
+                                        /* Nothing to do here. */
+
+                                        break;
+                                }
+
+                        default:
+                                {
+                                        printk(KERN_ERR
+                                               "%s: Unsupported memory type: %d\n",
+                                               __func__, region->memType);
+                                        return -EINVAL;
+                                }
+                        }
+
+                        segment->virtAddr = NULL;
+                        segment->physAddr = 0;
+                        segment->numBytes = 0;
+                }
+
+                if (region->numLockedPages > 0) {
+                        int pageIdx;
+
+                        /* Some user pages were locked. We need to go and unlock them now. */
+
+                        for (pageIdx = 0; pageIdx < region->numLockedPages;
+                             pageIdx++) {
+                                struct page *page =
+                                    region->lockedPages[pageIdx];
+
+                                if (memMap->dir == DMA_FROM_DEVICE) {
+                                        SetPageDirty(page);
+                                }
+                                page_cache_release(page);
+                        }
+                        kfree(region->lockedPages);
+                        region->numLockedPages = 0;
+                        region->lockedPages = NULL;
+                }
+
+                region->memType = DMA_MEM_TYPE_NONE;
+                region->virtAddr = NULL;
+                region->numBytes = 0;
+                region->numSegmentsUsed = 0;
+        }
+        memMap->userTask = NULL;
+        memMap->numRegionsUsed = 0;
+        memMap->inUse = 0;
+
+        up(&memMap->lock);
+
+        return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 000000000000..ca0ad736870b
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma_device.c
+*
+*   @brief  private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+        [DMA_DEVICE_MEM_TO_MEM] =       /* MEM 2 MEM */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "mem-to-mem",
+         .config = {
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+                    },
+         },
+        [DMA_DEVICE_VPM_MEM_TO_MEM] =   /* VPM */
+        {
+         .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+         .name = "vpm",
+         .dedicatedController = 0,
+         .dedicatedChannel = 0,
+         /* reserve DMA0:0 for VPM */
+         },
+        [DMA_DEVICE_NAND_MEM_TO_MEM] =  /* NAND */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "nand",
+         .config = {
+                    .srcPeripheralPort = 0,
+                    .dstPeripheralPort = 0,
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+                    },
+         },
+        [DMA_DEVICE_PIF_MEM_TO_DEV] =   /* PIF TX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+         | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+         | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+         .name = "pif_tx",
+         .dmacPort = {14, 5},
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    /* dstPeripheralPort          = 5 or 14 */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    .maxDataPerBlock = 16256,
+                    },
+         },
+        [DMA_DEVICE_PIF_DEV_TO_MEM] =   /* PIF RX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+         | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+         /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+         | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+         .name = "pif_rx",
+         .dmacPort = {14, 5},
+         .config = {
+                    /* srcPeripheralPort          = 5 or 14 */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    .maxDataPerBlock = 16256,
+                    },
+         },
+        [DMA_DEVICE_I2S0_DEV_TO_MEM] =  /* I2S RX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "i2s0_rx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: I2S0 */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_I2S0_MEM_TO_DEV] =  /* I2S TX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "i2s0_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 1,     /* DST: I2S0 */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_I2S1_DEV_TO_MEM] =  /* I2S1 RX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "i2s1_rx",
+         .config = {
+                    .srcPeripheralPort = 2,     /* SRC: I2S1 */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_I2S1_MEM_TO_DEV] =  /* I2S1 TX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "i2s1_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 3,     /* DST: I2S1 */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_ESW_MEM_TO_DEV] =   /* ESW TX */
+        {
+         .name = "esw_tx",
+         .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+         .dedicatedController = 1,
+         .dedicatedChannel = 3,
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 1,     /* DST: ESW (MTP) */
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    /* DMAx_AHB_SSTATARy */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    /* DMAx_AHB_DSTATARy */
+                    .dstStatusRegisterAddress = 0x30490010,
+                    /* DMAx_AHB_CFGy */
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    /* DMAx_AHB_CTLy */
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    },
+         },
+        [DMA_DEVICE_ESW_DEV_TO_MEM] =   /* ESW RX */
+        {
+         .name = "esw_rx",
+         .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+         .dedicatedController = 1,
+         .dedicatedChannel = 2,
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: ESW (PTM) */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    /* DMAx_AHB_SSTATARy */
+                    .srcStatusRegisterAddress = 0x30480010,
+                    /* DMAx_AHB_DSTATARy */
+                    .dstStatusRegisterAddress = 0x00000000,
+                    /* DMAx_AHB_CFGy */
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    /* DMAx_AHB_CTLy */
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    },
+         },
+        [DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =   /* APM Codec A Ingress */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "apm_a_rx",
+         .config = {
+                    .srcPeripheralPort = 2,     /* SRC: Codec A Ingress FIFO */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =   /* APM Codec A Egress */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "apm_a_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 3,     /* DST: Codec A Egress FIFO */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =   /* APM Codec B Ingress */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "apm_b_rx",
+         .config = {
+                    .srcPeripheralPort = 4,     /* SRC: Codec B Ingress FIFO */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =   /* APM Codec B Egress */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "apm_b_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 5,     /* DST: Codec B Egress FIFO */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =   /* APM Codec C Ingress */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "apm_c_rx",
+         .config = {
+                    .srcPeripheralPort = 4,     /* SRC: Codec C Ingress FIFO */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =      /* PCM0 RX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "pcm0_rx",
+         .config = {
+                    .srcPeripheralPort = 12,    /* SRC: PCM0 */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =      /* PCM0 TX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0,
+         .name = "pcm0_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 13,    /* DST: PCM0 */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =      /* PCM1 RX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "pcm1_rx",
+         .config = {
+                    .srcPeripheralPort = 14,    /* SRC: PCM1 */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+                    },
+         },
+        [DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =      /* PCM1 TX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "pcm1_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 15,    /* DST: PCM1 */
+                    .srcStatusRegisterAddress = 0,
+                    .dstStatusRegisterAddress = 0,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_SPUM_DEV_TO_MEM] =  /* SPUM RX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "spum_rx",
+         .config = {
+                    .srcPeripheralPort = 6,     /* SRC: Codec A Ingress FIFO */
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    /* Busrt size **MUST** be 16 for SPUM to work */
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    /* on the RX side, SPU needs to be the flow controller */
+                    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+                    },
+         },
+        [DMA_DEVICE_SPUM_MEM_TO_DEV] =  /* SPUM TX */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "spum_tx",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .dstPeripheralPort = 7,     /* DST: SPUM */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+                    /* Busrt size **MUST** be 16 for SPUM to work */
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+                    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+                    },
+         },
+        [DMA_DEVICE_MEM_TO_VRAM] =      /* MEM 2 VRAM */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "mem-to-vram",
+         .config = {
+                    .srcPeripheralPort = 0,     /* SRC: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    },
+         },
+        [DMA_DEVICE_VRAM_TO_MEM] =      /* VRAM 2 MEM */
+        {
+         .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+         .name = "vram-to-mem",
+         .config = {
+                    .dstPeripheralPort = 0,     /* DST: memory */
+                    .srcStatusRegisterAddress = 0x00000000,
+                    .dstStatusRegisterAddress = 0x00000000,
+                    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+                    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+                    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+                    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+                    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+                    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+                    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+                    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+                    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+                    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+                    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+                    },
+         },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute);    /* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 000000000000..f01da877148e
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP                         BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV                     0xB0
+#define CFG_GLOBAL_RAM_SIZE                     0x10000000
+#define CFG_GLOBAL_RAM_BASE                     0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 000000000000..b5beb0b30734
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107   10
+#define BCM11109   11
+#define BCM11170   12
+#define BCM11110   13
+#define BCM11211   14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM    4
+#endif
diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 000000000000..caa20e59db99
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 000000000000..8b3d80367293
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+   #include <linux/delay.h>
+#else
+   #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 000000000000..5d510130a25f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.h
+*
+*  @brief   API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+   System specific channel ID should be defined as follows
+
+   For example:
+
+   #include <dmacHw.h>
+   ...
+   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
+   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
+   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
+   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
+   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
+   ...
+   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
+   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
+   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
+   ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
+
+typedef enum {
+        dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,    /* Channel priority 0. Lowest priority DMA channel */
+        dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,    /* Channel priority 1 */
+        dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,    /* Channel priority 2 */
+        dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,    /* Channel priority 3 */
+        dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,    /* Channel priority 4 */
+        dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,    /* Channel priority 5 */
+        dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,    /* Channel priority 6 */
+        dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7     /* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+        dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,   /* Source DMA master interface 1 */
+        dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,   /* Source DMA master interface 2 */
+        dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,   /* Destination DMA master interface 1 */
+        dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2    /* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+        dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit  (1 byte) per transaction */
+        dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,       /* Source 16 bit (2 byte) per transaction */
+        dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,       /* Source 32 bit (4 byte) per transaction */
+        dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,       /* Source 64 bit (8 byte) per transaction */
+        dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit  (1 byte) per transaction */
+        dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,       /* Destination 16 bit (2 byte) per transaction */
+        dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,       /* Destination 32 bit (4 byte) per transaction */
+        dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64        /* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+        dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,  /* Source No burst */
+        dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,  /* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+        dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,  /* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+        dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,        /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+        dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,  /* Destination No burst */
+        dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,  /* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+        dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,  /* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+        dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+        dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,  /* Memory to memory transfer */
+        dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,   /* Peripheral to memory transfer */
+        dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,   /* Memory to peripheral transfer */
+        dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC     /* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+        dmacHw_TRANSFER_MODE_PERREQUEST,        /* Block transfer per DMA request */
+        dmacHw_TRANSFER_MODE_CONTINUOUS,        /* Continuous transfer of streaming data */
+        dmacHw_TRANSFER_MODE_PERIODIC   /* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+        dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,   /* Increment source address after every transaction */
+        dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,   /* Decrement source address after every transaction */
+        dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,   /* Increment destination address after every transaction */
+        dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,   /* Decrement destination address after every transaction */
+        dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,     /* No change in source address after every transaction */
+        dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC      /* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+        dmacHw_FLOW_CONTROL_DMA,        /* DMA working as flow controller (default) */
+        dmacHw_FLOW_CONTROL_PERIPHERAL  /* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+        dmacHw_TRANSFER_STATUS_BUSY,    /* DMA Transfer ongoing */
+        dmacHw_TRANSFER_STATUS_DONE,    /* DMA Transfer completed */
+        dmacHw_TRANSFER_STATUS_ERROR    /* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+        dmacHw_INTERRUPT_DISABLE,       /* Interrupt disable  */
+        dmacHw_INTERRUPT_ENABLE /* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+        dmacHw_INTERRUPT_STATUS_NONE = 0x0,     /* No DMA interrupt */
+        dmacHw_INTERRUPT_STATUS_TRANS = 0x1,    /* End of DMA transfer interrupt */
+        dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,    /* End of block transfer interrupt */
+        dmacHw_INTERRUPT_STATUS_ERROR = 0x4     /* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+        dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,   /* Number of DMA channel */
+        dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,        /* Maximum channel burst size */
+        dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,       /* Number of DMA master interface */
+        dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,     /* Channel Data bus width */
+        dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE      /* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t;  /* DMA channel handle */
+typedef uint32_t dmacHw_ID_t;   /* DMA channel Id.  Must be created using
+                                   "dmacHw_MAKE_CHANNEL_ID" macro
+                                 */
+/* DMA channel configuration parameters */
+typedef struct {
+        uint32_t srcPeripheralPort;     /* Source peripheral port */
+        uint32_t dstPeripheralPort;     /* Destination peripheral port */
+        uint32_t srcStatusRegisterAddress;      /* Source status register address */
+        uint32_t dstStatusRegisterAddress;      /* Destination status register address of type  */
+
+        uint32_t srcGatherWidth;        /* Number of bytes gathered before successive gather opearation */
+        uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */
+        uint32_t dstScatterWidth;       /* Number of bytes sacattered before successive scatter opearation */
+        uint32_t dstScatterJump;        /* Number of bytes jumpped  before successive scatter opearation */
+        uint32_t maxDataPerBlock;       /* Maximum number of bytes to be transferred per block/descrptor.
+                                           0 = Maximum possible.
+                                         */
+
+        dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */
+        dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */
+        dmacHw_TRANSFER_TYPE_e transferType;    /* DMA transfer type  */
+        dmacHw_TRANSFER_MODE_e transferMode;    /* DMA transfer mode */
+        dmacHw_MASTER_INTERFACE_e srcMasterInterface;   /* DMA source interface  */
+        dmacHw_MASTER_INTERFACE_e dstMasterInterface;   /* DMA destination interface */
+        dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;      /* Source transaction width   */
+        dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;      /* Destination transaction width */
+        dmacHw_BURST_WIDTH_e srcMaxBurstWidth;  /* Source burst width */
+        dmacHw_BURST_WIDTH_e dstMaxBurstWidth;  /* Destination burst width */
+        dmacHw_INTERRUPT_e blockTransferInterrupt;      /* Block trsnafer interrupt */
+        dmacHw_INTERRUPT_e completeTransferInterrupt;   /* Complete DMA trsnafer interrupt */
+        dmacHw_INTERRUPT_e errorInterrupt;      /* Error interrupt */
+        dmacHw_CHANNEL_PRIORITY_e channelPriority;      /* Channel priority */
+        dmacHw_FLOW_CONTROL_e flowControler;    /* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId   /* [ IN ] DMA Channel Id */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle   /*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,   /*   [ IN ] Configuration settings */
+                                    void *pSrcAddr,     /*   [ IN ] Source (Peripheral/Memory) address */
+                                    void *pDstAddr,     /*   [ IN ] Destination (Peripheral/Memory) address */
+                                    size_t dataLen      /*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
+*       is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,        /*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+                          uint32_t descriptorPhyAddr,   /*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+                          uint32_t len, /*  [ IN ] Size of the pBuf */
+                          uint32_t num  /*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt  /*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,        /*  [ IN ] DMA Channel handle  */
+                         dmacHw_CONFIG_t *pConfig       /*   [ IN ] Configuration settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,  /*  [ IN ] Configuration settings */
+                             void *pDescriptor, /*  [ IN ] Descriptor buffer  */
+                             void *pSrcAddr,    /*  [ IN ] Source (Peripheral/Memory) address */
+                             void *pDstAddr,    /*  [ IN ] Destination (Peripheral/Memory) address */
+                             size_t dataLen     /*  [ IN ] Length in bytes   */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle        /*   [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,       /*  [ IN ] Configuration settings */
+                                void *pDescriptor,      /*  [ IN ] Descriptor buffer  */
+                                uint32_t ctlAddress,    /*  [ IN ] Address of the device control register  */
+                                uint32_t control        /*  [ IN ] Device control information */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMA transferred to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,  /*  [ IN ] DMA Channel handle    */
+                               dmacHw_CONFIG_t *pConfig,        /*  [ IN ]  Configuration settings */
+                               void *pDescriptor,       /*  [ IN ] Descriptor buffer  */
+                               void **ppBbuf,   /*  [ OUT ] Data received */
+                               size_t *pLlen    /*  [ OUT ] Length of the data received */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will form the descriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,    /*  [ IN ] DMA Channel handle   */
+                                     dmacHw_CONFIG_t *pConfig,  /*  [ IN ] Configuration settings */
+                                     void *pDescriptor, /*  [ IN ] Descriptor buffer  */
+                                     uint32_t srcAddr,  /*  [ IN ] Source peripheral address */
+                                     void *(*fpAlloc) (int len),        /*  [ IN ] Function pointer  that provides destination memory */
+                                     int len,   /*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+                                     int num    /*  [ IN ] Number of descriptor to set */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,    /*   [ IN ] DMA Channel handle */
+                             dmacHw_CONFIG_t *pConfig,  /*   [ IN ] Configuration settings */
+                             void *pDescriptor  /*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor    /*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /*   [ IN ] DMA Channel handle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,       /*   [ IN ] DMA Channel handle */
+                                  void *pDescriptor     /*   [ IN ] Descriptor buffer */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  -1  - On failure
+*            0  - On success
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,    /*  [ IN ] Configuration settings */
+                   void *pDescriptor,   /*  [ IN ] Descriptor buffer  */
+                   void (*fpFree) (void *)      /*  [ IN ] Function pointer to free data memory */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle       /*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*           of type dmacHw_INTERRUPT_STATUS_e
+*  @note
+*           This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle      /*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,  /*  [ IN ] DMA Channel handle  */
+                               void *userData   /*  [ IN ] User data  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle  /*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*
+*  @return  void
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,      /*  [ IN ] DMA Channel handle  */
+                           void *pDescriptor,   /*  [ IN ] Descriptor buffer  */
+                           int (*fpPrint) (const char *, ...)   /*  [ IN ] Print callback function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,       /*  [ IN ]  DMA Channel handle  */
+                                          dmacHw_CONTROLLER_ATTRIB_e attr       /*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 000000000000..51357dd5b666
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if   defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 000000000000..1c639c8ee08f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+*  @file    intcHw.h
+*
+*  @brief   generic interrupt controller API
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 000000000000..c30d2a5975a6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+    #include <linux/module.h>
+#else
+    #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 000000000000..e5f60bf5a1f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    reg.h
+*
+*  @brief   Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x)      (*((volatile uint32_t *)(x)))
+#define __REG16(x)      (*((volatile uint16_t *)(x)))
+#define __REG8(x)       (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/*  typedef struct */
+/*  { */
+/*      uint32_t reg1;           offset 0x00 */
+/*      uint32_t reg2;           offset 0x04 */
+/*      uint32_t reg3;           offset 0x08 */
+/*      uint32_t reg4;           offset 0x0c */
+/*      REG32_RSVD(0x10, 0x20); */
+/*      uint32_t reg5;           offset 0x20 */
+/*      ... */
+/*  } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
+/* flags variable to be declared locally. */
+/* e.g. */
+/*    statement1; */
+/*    { */
+/*       REG_LOCAL_IRQ_SAVE; */
+/*       <multiple statements here> */
+/*       REG_LOCAL_IRQ_RESTORE; */
+/*    } */
+/*    statement2; */
+/*  */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
+        unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *reg &= value;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *reg |= value;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+                                     uint32_t value)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *reg = (*reg & mask) | value;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+        *reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 000000000000..b9d7e0732dfc
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw.h
+*
+*  @brief   Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+        secHw_MODE_SECURE = 0x0,        /* Switches processor into secure mode */
+        secHw_MODE_NONSECURE = 0x1      /* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+*  @brief   Requesting to execute the function in secure mode
+*
+*  This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t       /* Function to run in secure mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Sets the  mode
+*
+*  his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE   /* Processor mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get the current mode
+*
+*  This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 000000000000..3a8718bbf700
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 000000000000..ad9e4005f141
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+   #include <linux/string.h>
+#else
+   #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 000000000000..f1236d00cb97
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.h
+*
+*  @brief   API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t;    /* Timer ID */
+typedef uint32_t tmrHw_COUNT_t; /* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t;      /* Timer interval */
+typedef uint32_t tmrHw_RATE_t;  /* Timer event (count/interrupt) rate */
+
+typedef enum {
+        tmrHw_INTERRUPT_STATUS_SET,     /* Interrupted  */
+        tmrHw_INTERRUPT_STATUS_UNSET    /* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+        tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */
+        tmrHw_CAPABILITY_RESOLUTION     /* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,   /*  [ IN ] Timer Id */
+                                  tmrHw_CAPABILITY_e capability /*  [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,     /*  [ IN ] Timer Id */
+                                        tmrHw_RATE_t rate       /*  [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,     /*  [ IN ] Timer Id */
+                                                tmrHw_INTERVAL_t msec   /*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,      /*  [ IN ] Timer Id */
+                                               tmrHw_INTERVAL_t msec    /*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,      /*  [ IN ] Timer Id */
+                                       uint32_t divider /*  [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId /*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId  /*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId  /*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId      /*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId   /*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId  /*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId    /*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId    /*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,   /*  [ IN ] Timer id */
+                          int (*fpPrint) (const char *, ...)    /*  [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,   /*  [ IN ] Timer id */
+                  unsigned long usecs   /*  [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 000000000000..30fa2d540630
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+        CAP_NOT_PRESENT = 0,
+        CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+        CAP_VPM,
+        CAP_ETH_PHY,
+        CAP_ETH_GMII,
+        CAP_ETH_SGMII,
+        CAP_USB,
+        CAP_TSC,
+        CAP_EHSS,
+        CAP_SDIO,
+        CAP_UARTB,
+        CAP_KEYPAD,
+        CAP_CLCD,
+        CAP_GE,
+        CAP_LEDM,
+        CAP_BBL,
+        CAP_VDEC,
+        CAP_PIF,
+        CAP_APM,
+        CAP_SPU,
+        CAP_PKA,
+        CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+        CAP_LCD_WVGA = 0,
+        CAP_LCD_VGA = 0x1,
+        CAP_LCD_WQVGA = 0x2,
+        CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 000000000000..933ce68ed90b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS          0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
+#define CAP_CONFIG0_USB0_DIS         0x00000080
+#define CAP_CONFIG0_USB1_DIS         0x00000100
+#define CAP_CONFIG0_TSC_DIS          0x00000200
+#define CAP_CONFIG0_EHSS0_DIS        0x00000400
+#define CAP_CONFIG0_EHSS1_DIS        0x00000800
+#define CAP_CONFIG0_SDIO0_DIS        0x00001000
+#define CAP_CONFIG0_SDIO1_DIS        0x00002000
+#define CAP_CONFIG0_UARTB_DIS        0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
+#define CAP_CONFIG0_CLCD_DIS         0x00010000
+#define CAP_CONFIG0_GE_DIS           0x00020000
+#define CAP_CONFIG0_LEDM_DIS         0x00040000
+#define CAP_CONFIG0_BBL_DIS          0x00080000
+#define CAP_CONFIG0_VDEC_DIS         0x00100000
+#define CAP_CONFIG0_PIF_DIS          0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
+
+#define CAP_CONFIG1_APMA_DIS         0x00000001
+#define CAP_CONFIG1_APMB_DIS         0x00000002
+#define CAP_CONFIG1_APMC_DIS         0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT   9
+#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS          0x00000010
+#define CAP_CONFIG2_PKA_DIS          0x00000020
+#define CAP_CONFIG2_RNG_DIS          0x00000080
+
+#if   (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+*  cap_isPresent -
+*
+*  PURPOSE:
+*     Determines if the chip has a certain capability present
+*
+*  PARAMETERS:
+*     capability - type of capability to determine if present
+*
+*  RETURNS:
+*     CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+        CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+        switch (capability) {
+        case CAP_VPM:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_ETH_PHY:
+                {
+                        if ((index == 0)
+                            && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_ETH_GMII:
+                {
+                        if ((index == 0)
+                            && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_ETH_SGMII:
+                {
+                        if ((index == 0)
+                            && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_USB:
+                {
+                        if ((index == 0)
+                            && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_TSC:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_EHSS:
+                {
+                        if ((index == 0)
+                            && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_SDIO:
+                {
+                        if ((index == 0)
+                            && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_UARTB:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_KEYPAD:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_CLCD:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_GE:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_LEDM:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_BBL:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_VDEC:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_PIF:
+                {
+                        if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_APM:
+                {
+                        if ((index == 0)
+                            && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 1)
+                            && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                        if ((index == 2)
+                            && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_SPU:
+                {
+                        if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_PKA:
+                {
+                        if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        case CAP_RNG:
+                {
+                        if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+                                returnVal = CAP_PRESENT;
+                        }
+                }
+                break;
+
+        default:
+                {
+                }
+                break;
+        }
+        return returnVal;
+}
+
+/****************************************************************************
+*  cap_getMaxArmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the ARM CPU
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+        return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+        return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+        return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxVpmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the VPM
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+        return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+        return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxLcdRes -
+*
+*  PURPOSE:
+*     Determines the maximum LCD resolution capabilities
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+        return (CAP_LCD_RES_T)
+                ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+                 CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 000000000000..70eaea866cfe
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN    0
+#define chipcHw_VPM_HW_PHASE_ALIGN    0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+        chipcHw_CLOCK_DDR,      /* DDR PHY Clock */
+        chipcHw_CLOCK_ARM,      /* ARM Clock */
+        chipcHw_CLOCK_ESW,      /* Ethernet Switch Clock */
+        chipcHw_CLOCK_VPM,      /* VPM Clock */
+        chipcHw_CLOCK_ESW125,   /* Ethernet MII Clock */
+        chipcHw_CLOCK_UART,     /* UART Clock */
+        chipcHw_CLOCK_SDIO0,    /* SDIO 0 Clock */
+        chipcHw_CLOCK_SDIO1,    /* SDIO 1 Clock */
+        chipcHw_CLOCK_SPI,      /* SPI Clock */
+        chipcHw_CLOCK_ETM,      /* ARM ETM Clock */
+
+        chipcHw_CLOCK_BUS,      /* BUS Clock */
+        chipcHw_CLOCK_OTP,      /* OTP Clock */
+        chipcHw_CLOCK_I2C,      /* I2C Host Clock */
+        chipcHw_CLOCK_I2S0,     /* I2S 0 Host Clock */
+        chipcHw_CLOCK_RTBUS,    /* DDR PHY Configuration Clock */
+        chipcHw_CLOCK_APM100,   /* APM100 Clock */
+        chipcHw_CLOCK_TSC,      /* Touch screen Clock */
+        chipcHw_CLOCK_LED,      /* LED Clock */
+
+        chipcHw_CLOCK_USB,      /* USB Clock */
+        chipcHw_CLOCK_LCD,      /* LCD CLock */
+        chipcHw_CLOCK_APM,      /* APM Clock */
+
+        chipcHw_CLOCK_I2S1,     /* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+        chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+        chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+            chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+        chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+            chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+        chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+            chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+        chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+            chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+        chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+        chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+        chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+        chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+        chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+        chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+        chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+        chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+        chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+        chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+        chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+        chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+        chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+        chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+        chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+        chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+        chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+        chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+        chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+        chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+        chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+        chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+        chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+        chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+        chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+        chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+        chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+        chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+        chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+        chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+        chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+        chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+        chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+        chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+        chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum  */
+typedef enum {
+        chipcHw_SPREAD_SPECTRUM_DISALLOW,       /* Spread spectrum support is not allowed */
+        chipcHw_SPREAD_SPECTRUM_ALLOW   /* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+        chipcHw_SPREAD_SPECTRUM_e ssSupport;    /* Allow/Disalow to support spread spectrum.
+                                                   If supported, call chipcHw_enableSpreadSpectrum ()
+                                                   to activate the spread spectrum with desired spread. */
+        uint32_t pllVcoFreqHz;  /* PLL VCO frequency in Hz */
+        uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */
+        uint32_t busClockFreqHz;        /* Bus clock frequency in Hz */
+        uint32_t armBusRatio;   /* ARM clock : Bus clock */
+        uint32_t vpmBusRatio;   /* VPM clock : Bus clock */
+        uint32_t ddrBusRatio;   /* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+        chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+        chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+        chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+        chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+        chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+        chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+        chipcHw_DDR_HW_PHASE_MARGIN_STRICT,     /*  Strict margin for DDR phase align condition */
+        chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,     /*  Medium margin for DDR phase align condition */
+        chipcHw_DDR_HW_PHASE_MARGIN_WIDE        /*  Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+        chipcHw_VPM_HW_PHASE_MARGIN_STRICT,     /*  Strict margin for VPM phase align condition */
+        chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,     /*  Medium margin for VPM phase align condition */
+        chipcHw_VPM_HW_PHASE_MARGIN_WIDE        /*  Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz                    25000000        /* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+                                                                             /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)        /* UART Transmit */
+#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)        /* NVI Interface */
+#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)        /* NVI Interface */
+#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)        /* NVI Interface */
+#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)        /* NVI Interface */
+#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)        /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)        /* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)        /* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)        /* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)        /* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)       /* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)       /* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)       /* LCD Power */
+#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)       /* LCD Ack */
+#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)       /* LCD FP */
+#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)       /* LCD LP */
+#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)       /* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam       /*  [ IN ] Misc chip initialization parameter */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL1
+*
+*  This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz,     /*  [ IN ] VCO frequency in Hz */
+                        chipcHw_SPREAD_SPECTRUM_e ssSupport     /*  [ IN ] SS status */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL2
+*
+*  This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz      /*  [ IN ] VCO frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock    /*  [ IN ] Configurable clock */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,   /*  [ IN ] Configurable clock */
+                                       uint32_t freq    /*  [ IN ] Clock frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success ( # of adjustment required )
+*            -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables core a clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock        /*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock      /*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock     /*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask        /*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask       /*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask     /*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask    /*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask      /*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetDisable(uint64_t mask       /*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetEnable(uint64_t mask        /*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask    /*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask     /*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask      /*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask   /*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask  /*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask        /*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get software override strap options
+*
+*  Retrieves software override strap options
+*
+*  @return   Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+*  @brief    Get pin strap options
+*
+*  Retrieves pin strap options
+*
+*  @return   Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Get valid pin strap options
+*
+*  Retrieves valid pin strap options
+*
+*  @return   valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin        /* GPIO Pin number */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,  /* GPIO Pin number */
+                                              chipcHw_GPIO_FUNCTION_e func      /* Configuration function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */
+                                          chipcHw_PIN_SLEW_RATE_e slewRate      /* Pin slew rate */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,    /* Pin of type chipcHw_PIN_XXXXX */
+                                               chipcHw_PIN_CURRENT_STRENGTH_e curr      /* Pin current rating */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual  pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin,   /* Pin of type chipcHw_PIN_XXXXX */
+                                        chipcHw_PIN_PULL_e pullup       /* Pullup register settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,        /* Pin of type chipcHw_PIN_XXXXX */
+                                           chipcHw_PIN_INPUTTYPE_e inputType    /* Pin input type */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/**  @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/**  @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+                           uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin        /* Margin alinging DDR  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin        /* Margin alinging VPM  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle     /* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle     /* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 000000000000..c78833acb37a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+        chipcHw_OPTYPE_BYPASS,  /* Bypass operation */
+        chipcHw_OPTYPE_OUTPUT   /* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+                                    chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+        return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+        if ((pChipcHw->
+             PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+            chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+                ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+                    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+                    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+                     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+                ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+                    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+        ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+        return (pChipcHw->
+                 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+                chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+        return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+        reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+        reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+        return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+        reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+        reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+        chipcHw_softResetEnable(mask);
+        chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+        uint32_t ctrl1 = (uint32_t) mask;
+        uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+        /* Deassert module soft reset */
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->SoftReset1 ^= ctrl1;
+        pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+        uint32_t ctrl1 = (uint32_t) mask;
+        uint32_t ctrl2 = (uint32_t) (mask >> 32);
+        uint32_t unhold = 0;
+
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->SoftReset1 |= ctrl1;
+        /* Mask out unhold request bits */
+        pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+        /* Process unhold requests */
+        if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+                unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+        }
+
+        if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+                unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+        }
+
+        if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+                unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+        }
+
+        if (unhold) {
+                /* Make sure unhold request is effective */
+                pChipcHw->SoftReset1 &= ~unhold;
+        }
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+        reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+        reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+        reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+        uint32_t ctrl1 = (uint32_t) mask;
+        uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+        reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+        reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+        return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+        uint32_t bits = 0;
+
+        REG_LOCAL_IRQ_SAVE;
+        if (mask & chipcHw_REG_STICKY_POR_BROM) {
+                bits |= chipcHw_REG_STICKY_POR_BROM;
+        } else {
+                uint32_t sticky;
+                sticky = pChipcHw->Sticky;
+
+                if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+                    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+                        bits |= chipcHw_REG_STICKY_BOOT_DONE;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_1;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_2;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_3;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_4;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_5;
+                }
+        }
+        pChipcHw->Sticky = bits;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+        uint32_t bits = 0;
+
+        REG_LOCAL_IRQ_SAVE;
+        if (mask &
+            (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+             chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+             chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+                uint32_t sticky = pChipcHw->Sticky;
+
+                if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+                    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+                        bits = chipcHw_REG_STICKY_BOOT_DONE;
+                        mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_1;
+                        mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_2;
+                        mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_3;
+                        mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_4;
+                        mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+                }
+                if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+                    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+                        bits |= chipcHw_REG_STICKY_GENERAL_5;
+                        mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+                }
+        }
+        pChipcHw->Sticky = bits | mask;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get software strap value
+*
+*  Retrieves software strap value
+*
+*  @return   Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+        return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+        reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Pin Strap Options
+*
+*  This function returns the raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+        return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Valid Strap Options
+*
+*  This function returns the valid raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+        uint32_t softStraps;
+
+        /*
+         ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+         ** which copies HW straps to soft straps if there is no override
+         */
+        softStraps = chipcHw_getSoftStraps();
+
+        return softStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+        uint32_t softStraps;
+
+        REG_LOCAL_IRQ_SAVE;
+        softStraps = chipcHw_getSoftStraps();
+
+        if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+                /* Copy HW straps to software straps */
+                chipcHw_setSoftStraps(chipcHw_getPinStraps());
+        }
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+        return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+        return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+        return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+        if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+                return 1;
+        } else {
+                return 0;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+        reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+        reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+        reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE2
+*
+*  This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+        reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE3
+*
+*  This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+        reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+        return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+                (chipcHw_REG_GPIO_MUX_MASK <<
+                 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+            chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+                                              chipcHw_GPIO_FUNCTION_e func)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+            ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+        *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+            func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+                                          chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+            ~(chipcHw_REG_SLEW_RATE_MASK <<
+              chipcHw_REG_SLEW_RATE_POSITION(pin));
+        *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+            (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+                                               chipcHw_PIN_CURRENT_STRENGTH_e
+                                               curr)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+            ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+        *((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+            (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+            ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+        *((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+            (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+                                           chipcHw_PIN_INPUTTYPE_e inputType)
+{
+        REG_LOCAL_IRQ_SAVE;
+        *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+            ~(chipcHw_REG_INPUTTYPE_MASK <<
+              chipcHw_REG_INPUTTYPE_POSITION(pin));
+        *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+            (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power up the USB PHY
+*
+*  This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+        reg32_modify_and(&pChipcHw->MiscCtrl,
+                         chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power down the USB PHY
+*
+*  This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+        reg32_modify_or(&pChipcHw->MiscCtrl,
+                        chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as host
+*
+*  This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+        reg32_modify_or(&pChipcHw->MiscCtrl,
+                        chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as device
+*
+*  This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+        reg32_modify_and(&pChipcHw->MiscCtrl,
+                         chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*
+*  This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+                                    chipcHw_OPTYPE_e type, int mode)
+{
+        volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+        volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+        switch (clock) {
+        case chipcHw_CLOCK_DDR:
+                pPLLReg = &pChipcHw->DDRClock;
+                break;
+        case chipcHw_CLOCK_ARM:
+                pPLLReg = &pChipcHw->ARMClock;
+                break;
+        case chipcHw_CLOCK_ESW:
+                pPLLReg = &pChipcHw->ESWClock;
+                break;
+        case chipcHw_CLOCK_VPM:
+                pPLLReg = &pChipcHw->VPMClock;
+                break;
+        case chipcHw_CLOCK_ESW125:
+                pPLLReg = &pChipcHw->ESW125Clock;
+                break;
+        case chipcHw_CLOCK_UART:
+                pPLLReg = &pChipcHw->UARTClock;
+                break;
+        case chipcHw_CLOCK_SDIO0:
+                pPLLReg = &pChipcHw->SDIO0Clock;
+                break;
+        case chipcHw_CLOCK_SDIO1:
+                pPLLReg = &pChipcHw->SDIO1Clock;
+                break;
+        case chipcHw_CLOCK_SPI:
+                pPLLReg = &pChipcHw->SPIClock;
+                break;
+        case chipcHw_CLOCK_ETM:
+                pPLLReg = &pChipcHw->ETMClock;
+                break;
+        case chipcHw_CLOCK_USB:
+                pPLLReg = &pChipcHw->USBClock;
+                if (type == chipcHw_OPTYPE_OUTPUT) {
+                        if (mode) {
+                                reg32_modify_and(pPLLReg,
+                                                 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+                        } else {
+                                reg32_modify_or(pPLLReg,
+                                                chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+                        }
+                }
+                break;
+        case chipcHw_CLOCK_LCD:
+                pPLLReg = &pChipcHw->LCDClock;
+                if (type == chipcHw_OPTYPE_OUTPUT) {
+                        if (mode) {
+                                reg32_modify_and(pPLLReg,
+                                                 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+                        } else {
+                                reg32_modify_or(pPLLReg,
+                                                chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+                        }
+                }
+                break;
+        case chipcHw_CLOCK_APM:
+                pPLLReg = &pChipcHw->APMClock;
+                if (type == chipcHw_OPTYPE_OUTPUT) {
+                        if (mode) {
+                                reg32_modify_and(pPLLReg,
+                                                 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+                        } else {
+                                reg32_modify_or(pPLLReg,
+                                                chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+                        }
+                }
+                break;
+        case chipcHw_CLOCK_BUS:
+                pClockCtrl = &pChipcHw->ACLKClock;
+                break;
+        case chipcHw_CLOCK_OTP:
+                pClockCtrl = &pChipcHw->OTPClock;
+                break;
+        case chipcHw_CLOCK_I2C:
+                pClockCtrl = &pChipcHw->I2CClock;
+                break;
+        case chipcHw_CLOCK_I2S0:
+                pClockCtrl = &pChipcHw->I2S0Clock;
+                break;
+        case chipcHw_CLOCK_RTBUS:
+                pClockCtrl = &pChipcHw->RTBUSClock;
+                break;
+        case chipcHw_CLOCK_APM100:
+                pClockCtrl = &pChipcHw->APM100Clock;
+                break;
+        case chipcHw_CLOCK_TSC:
+                pClockCtrl = &pChipcHw->TSCClock;
+                break;
+        case chipcHw_CLOCK_LED:
+                pClockCtrl = &pChipcHw->LEDClock;
+                break;
+        case chipcHw_CLOCK_I2S1:
+                pClockCtrl = &pChipcHw->I2S1Clock;
+                break;
+        }
+
+        if (pPLLReg) {
+                switch (type) {
+                case chipcHw_OPTYPE_OUTPUT:
+                        /* PLL clock output enable/disable */
+                        if (mode) {
+                                if (clock == chipcHw_CLOCK_DDR) {
+                                        /* DDR clock enable is inverted */
+                                        reg32_modify_and(pPLLReg,
+                                                         ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+                                } else {
+                                        reg32_modify_or(pPLLReg,
+                                                        chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+                                }
+                        } else {
+                                if (clock == chipcHw_CLOCK_DDR) {
+                                        /* DDR clock disable is inverted */
+                                        reg32_modify_or(pPLLReg,
+                                                        chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+                                } else {
+                                        reg32_modify_and(pPLLReg,
+                                                         ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+                                }
+                        }
+                        break;
+                case chipcHw_OPTYPE_BYPASS:
+                        /* PLL clock bypass enable/disable */
+                        if (mode) {
+                                reg32_modify_or(pPLLReg,
+                                                chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+                        } else {
+                                reg32_modify_and(pPLLReg,
+                                                 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+                        }
+                        break;
+                }
+        } else if (pClockCtrl) {
+                switch (type) {
+                case chipcHw_OPTYPE_OUTPUT:
+                        if (mode) {
+                                reg32_modify_or(pClockCtrl,
+                                                chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+                        } else {
+                                reg32_modify_and(pClockCtrl,
+                                                 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+                        }
+                        break;
+                case chipcHw_OPTYPE_BYPASS:
+                        if (mode) {
+                                reg32_modify_or(pClockCtrl,
+                                                chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+                        } else {
+                                reg32_modify_and(pClockCtrl,
+                                                 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+                        }
+                        break;
+                }
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+        /* Disable output of the clock */
+        chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable a core clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+        /* Enable output of the clock */
+        chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+        /* Enable bypass clock */
+        chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+        /* Disable bypass clock */
+        chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+        return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+        reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+        reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+        reg32_modify_or(&pChipcHw->PLLConfig,
+                        chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+        reg32_modify_or(&pChipcHw->PLLConfig2,
+                        chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+        reg32_modify_and(&pChipcHw->PLLConfig,
+                         ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+        reg32_modify_and(&pChipcHw->PLLConfig2,
+                         ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+        return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+        return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+        pChipcHw->PLLConfig |=
+            (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+        pChipcHw->PLLConfig2 |=
+            (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+        return (uint8_t) ((pChipcHw->
+                           PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+                          >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+        return (uint8_t) ((pChipcHw->
+                           PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+                          >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+        REG_LOCAL_IRQ_SAVE;
+        if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+                pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+        } else {
+                pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+        }
+        pChipcHw->VPMPhaseCtrl2 =
+            (pChipcHw->
+             VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+                               chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+        uint32_t ge = 0;
+        uint32_t le = 0;
+
+        switch (margin) {
+        case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+                ge = 0x0F;
+                le = 0x0F;
+                break;
+        case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+                ge = 0x03;
+                le = 0x3F;
+                break;
+        case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+                ge = 0x01;
+                le = 0x7F;
+                break;
+        }
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+
+                pChipcHw->DDRPhaseCtrl1 &=
+                    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+                       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+                      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+                          chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+                pChipcHw->DDRPhaseCtrl1 |=
+                    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+                     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+                REG_LOCAL_IRQ_RESTORE;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+        uint32_t ge = 0;
+        uint32_t le = 0;
+
+        switch (margin) {
+        case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+                ge = 0x0F;
+                le = 0x0F;
+                break;
+        case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+                ge = 0x03;
+                le = 0x3F;
+                break;
+        case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+                ge = 0x01;
+                le = 0x7F;
+                break;
+        }
+
+        {
+                REG_LOCAL_IRQ_SAVE;
+
+                pChipcHw->VPMPhaseCtrl1 &=
+                    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+                       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+                      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+                          chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+                pChipcHw->VPMPhaseCtrl1 |=
+                    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+                     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+                REG_LOCAL_IRQ_RESTORE;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+        return (pChipcHw->
+                PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+        return (pChipcHw->
+                PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+        return (pChipcHw->
+                PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+            chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+        return (pChipcHw->
+                PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+            chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+        return (pChipcHw->
+                PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+            chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+        return (pChipcHw->
+                PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+            chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->DDRPhaseCtrl2 &=
+            ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+              chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+        pChipcHw->DDRPhaseCtrl2 |=
+            (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+            chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->VPMPhaseCtrl2 &=
+            ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+              chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+        pChipcHw->VPMPhaseCtrl2 |=
+            (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+            chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        /* Clear timeout interrupt service bit */
+        pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+        pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        /* Clear timeout interrupt service bit */
+        pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+        pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+        /* Enable timeout interrupt */
+        pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
+        /* Enable timeout interrupt */
+        pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+        REG_LOCAL_IRQ_SAVE;
+        pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+        REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 000000000000..b162448f613c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_reg.h
+*
+*  @brief   Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
+
+typedef struct {
+        uint32_t ChipId;        /* Chip ID */
+        uint32_t DDRClock;      /* PLL1 Channel 1 for DDR clock */
+        uint32_t ARMClock;      /* PLL1 Channel 2 for ARM clock */
+        uint32_t ESWClock;      /* PLL1 Channel 3 for ESW system clock */
+        uint32_t VPMClock;      /* PLL1 Channel 4 for VPM clock */
+        uint32_t ESW125Clock;   /* PLL1 Channel 5 for ESW 125MHz clock */
+        uint32_t UARTClock;     /* PLL1 Channel 6 for UART clock */
+        uint32_t SDIO0Clock;    /* PLL1 Channel 7 for SDIO 0 clock */
+        uint32_t SDIO1Clock;    /* PLL1 Channel 8 for SDIO 1 clock */
+        uint32_t SPIClock;      /* PLL1 Channel 9 for SPI master Clock  */
+        uint32_t ETMClock;      /* PLL1 Channel 10 for ARM ETM Clock  */
+
+        uint32_t ACLKClock;     /* ACLK Clock (Divider) */
+        uint32_t OTPClock;      /* OTP Clock  (Divider) */
+        uint32_t I2CClock;      /* I2C Clock (CK_13m) (Divider) */
+        uint32_t I2S0Clock;     /* I2S0 Clock (Divider) */
+        uint32_t RTBUSClock;    /* RTBUS (DDR PHY Config.) Clock (Divider) */
+        uint32_t pad1;
+        uint32_t APM100Clock;   /* APM 100MHz CLK Clock (Divider) */
+        uint32_t TSCClock;      /* TSC Clock (Divider) */
+        uint32_t LEDClock;      /* LED Clock (Divider) */
+
+        uint32_t USBClock;      /* PLL2 Channel 1 for USB clock */
+        uint32_t LCDClock;      /* PLL2 Channel 2 for LCD clock */
+        uint32_t APMClock;      /* PLL2 Channel 3 for APM 200 MHz clock */
+
+        uint32_t BusIntfClock;  /* Bus interface clock */
+
+        uint32_t PLLStatus;     /* PLL status register (PLL1) */
+        uint32_t PLLConfig;     /* PLL configuration register  (PLL1) */
+        uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */
+        uint32_t PLLDivider;    /* PLL divider control register (PLL1) */
+        uint32_t PLLControl1;   /* PLL analog control register #1 (PLL1) */
+        uint32_t PLLControl2;   /* PLL analog control register #2 (PLL1) */
+
+        uint32_t I2S1Clock;     /* I2S1 Clock  */
+        uint32_t AudioEnable;   /* Enable/ disable audio channel */
+        uint32_t SoftReset1;    /* Reset blocks */
+        uint32_t SoftReset2;    /* Reset blocks */
+        uint32_t Spare1;        /* Phase align interrupts */
+        uint32_t Sticky;        /* Sticky bits */
+        uint32_t MiscCtrl;      /* Misc. control */
+        uint32_t pad3[3];
+
+        uint32_t PLLStatus2;    /* PLL status register (PLL2) */
+        uint32_t PLLConfig2;    /* PLL configuration register  (PLL2) */
+        uint32_t PLLPreDivider2;        /* PLL pre-divider control register (PLL2) */
+        uint32_t PLLDivider2;   /* PLL divider control register (PLL2) */
+        uint32_t PLLControl12;  /* PLL analog control register #1 (PLL2) */
+        uint32_t PLLControl22;  /* PLL analog control register #2 (PLL2) */
+
+        uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */
+        uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */
+        uint32_t PhaseAlignStatus;      /* DDR/VPM Clock Phase Alignment Status */
+        uint32_t PhaseCtrlStatus;       /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+        uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */
+        uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */
+        uint32_t pad4[9];
+
+        uint32_t SoftOTP1;      /* Software OTP control */
+        uint32_t SoftOTP2;      /* Software OTP control */
+        uint32_t SoftStraps;    /* Software strap */
+        uint32_t PinStraps;     /* Pin Straps */
+        uint32_t DiffOscCtrl;   /* Diff oscillator control */
+        uint32_t DiagsCtrl;     /* Diagnostic control */
+        uint32_t DiagsOutputCtrl;       /* Diagnostic output enable */
+        uint32_t DiagsReadBackCtrl;     /* Diagnostic read back control */
+
+        uint32_t LcdPifMode;    /* LCD/PIF Pin Sharing MUX Mode */
+
+        uint32_t GpioMux_0_7;   /* Pin Sharing MUX0 Control */
+        uint32_t GpioMux_8_15;  /* Pin Sharing MUX1 Control */
+        uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */
+        uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */
+        uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */
+        uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */
+        uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */
+        uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */
+
+        uint32_t GpioSR_0_7;    /* Slew rate for GPIO 0 - 7 */
+        uint32_t GpioSR_8_15;   /* Slew rate for GPIO 8 - 15 */
+        uint32_t GpioSR_16_23;  /* Slew rate for GPIO 16 - 23 */
+        uint32_t GpioSR_24_31;  /* Slew rate for GPIO 24 - 31 */
+        uint32_t GpioSR_32_39;  /* Slew rate for GPIO 32 - 39 */
+        uint32_t GpioSR_40_47;  /* Slew rate for GPIO 40 - 47 */
+        uint32_t GpioSR_48_55;  /* Slew rate for GPIO 48 - 55 */
+        uint32_t GpioSR_56_63;  /* Slew rate for GPIO 56 - 63 */
+        uint32_t MiscSR_0_7;    /* Slew rate for MISC 0 - 7 */
+        uint32_t MiscSR_8_15;   /* Slew rate for MISC 8 - 15 */
+
+        uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */
+        uint32_t GpioPull_16_31;        /* Pull up registers for GPIO 16 - 31 */
+        uint32_t GpioPull_32_47;        /* Pull up registers for GPIO 32 - 47 */
+        uint32_t GpioPull_48_63;        /* Pull up registers for GPIO 48 - 63 */
+        uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */
+
+        uint32_t GpioInput_0_31;        /* Input type for GPIO 0 - 31 */
+        uint32_t GpioInput_32_63;       /* Input type for GPIO 32 - 63 */
+        uint32_t MiscInput_0_15;        /* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
+#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
+#define chipcHw_REG_REV_A0                              0xA00
+#define chipcHw_REG_REV_B0                              0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000      /* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001      /* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008      /* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004      /* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020      /* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010      /* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001      /* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000      /* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000      /* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080      /* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000      /* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000      /* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000      /* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000      /* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20      /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000      /* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000      /* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000      /* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000      /* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000      /* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8       /* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00      /* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF      /* Clock post divider mask
+
+                                                                           00000000 = divide-by-256
+                                                                           00000001 = divide-by-1
+                                                                           00000010 = divide-by-2
+                                                                           00000011 = divide-by-3
+                                                                           00000100 = divide-by-4
+                                                                           00000101 = divide-by-5
+                                                                           00000110 = divide-by-6
+                                                                           .
+                                                                           .
+                                                                           11111011 = divide-by-251
+                                                                           11111100 = divide-by-252
+                                                                           11111101 = divide-by-253
+                                                                           11111110 = divide-by-254
+                                                                         */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000      /* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000      /* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000      /* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF      /* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000      /* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000      /* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000      /* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000      /* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000      /* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000      /* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000      /* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
+#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF      /* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)    /* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0       /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+                                                                   chipcHw_REG_PLL_DIVIDER_FRAC
+                                                                   = 0, when SS is disable
+                                                                 */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001      /* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000      /* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002      /* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004      /* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006      /* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008      /* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E      /* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000      /* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020      /* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030      /* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000      /* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040      /* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080      /* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0      /* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0      /* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400      /* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800      /* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000      /* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100      /* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200      /* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300      /* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300      /* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS                             0x02000000      /* I2C Slave  */
+#define chipcHw_STRAPS_SPIS                             0x01000000      /* SPI Slave  */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001      /* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002      /* LCD pins are used to perform PIF functions  */
+
+#define chipcHw_GPIO_COUNT                              61      /* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001      /* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002      /* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003      /* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART                       0x00000004      /* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005      /* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006      /* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007      /* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008      /* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009      /* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A      /* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B      /* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C      /* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D      /* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000      /* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F      /* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000      /* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008      /* Normal slew rate */
+                                                        /* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008      /* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001      /* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002      /* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004      /* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005      /* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006      /* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007      /* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK                        0x00000007      /* Mask */
+                                                        /* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE                           0x00000000      /* No pull up register */
+#define chipcHw_REG_PULL_UP                             0x00000001      /* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN                           0x00000002      /* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK                         0x00000003      /* Mask */
+                                                        /* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000      /* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST                        0x00000001      /* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001      /* Mask */
+                                                        /* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001      /* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002      /* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004      /* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008      /* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010      /* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020      /* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040      /* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080      /* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100      /* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200      /* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400      /* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800      /* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000      /* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000      /* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000      /* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000      /* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000      /* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000      /* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000      /* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000      /* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000      /* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000      /* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000      /* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000      /* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000      /* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000      /* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000      /* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000      /* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000      /* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000      /* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000      /* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000      /* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL   /* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL   /* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL   /* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL   /* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL   /* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL   /* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL   /* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL   /* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL   /* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL   /* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL   /* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL   /* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL   /* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL   /* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL   /* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL   /* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL   /* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL   /* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL   /* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL   /* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL   /* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL   /* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL   /* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL   /* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL   /* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL   /* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL   /* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL   /* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL   /* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL   /* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL   /* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL   /* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL   /* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL   /* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL   /* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL   /* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL   /* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL   /* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL   /* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL   /* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL   /* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL   /* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL   /* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL   /* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL   /* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL   /* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL   /* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL   /* Unhold ARM reset  */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL   /* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001      /* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002      /* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004      /* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008      /* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010      /* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020      /* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040      /* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080      /* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000      /* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000      /* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000      /* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000      /* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000      /* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000      /* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008      /* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004      /* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002      /* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD      /* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE      /* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001      /* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL   /* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL   /* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL   /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL   /* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL   /* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL   /* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL   /* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL   /* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL   /* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL   /* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL   /* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL   /* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL   /* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL   /* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL   /* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL   /* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL   /* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL   /* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL   /* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL   /* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL   /* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL   /* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL   /* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001      /* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002      /* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004      /* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008      /* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010      /* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020      /* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040      /* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM                     0x00000080      /* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100      /* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200      /* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400      /* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800      /* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000      /* OTP reset */
+
+                                                        /* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000      /* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000      /* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002      /* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001      /* Enable access to DDR using system BUS */
+                                                        /* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000      /* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000      /* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F      /* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F      /* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF      /* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+                                                        /* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000      /* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000      /* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F      /* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F      /* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF      /* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+                                                        /* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000      /* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F      /* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
+#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000      /* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD                            0x00400000      /* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F      /* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000      /* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F      /* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
+#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080      /* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD                            0x00000040      /* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F      /* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
+                                                        /* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000      /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000      /* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F      /* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F      /* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF      /* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
+                                                        /* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003      /* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
+#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
+#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000      /* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000      /* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F      /* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F      /* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF      /* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
+
+#endif /* CHIPCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 000000000000..f1b68e26fa6d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    ddrcReg.h
+*
+*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+        typedef struct {
+                uint32_t memcStatus;
+                uint32_t memcCmd;
+                uint32_t directCmd;
+                uint32_t memoryCfg;
+                uint32_t refreshPrd;
+                uint32_t casLatency;
+                uint32_t writeLatency;
+                uint32_t tMrd;
+                uint32_t tRas;
+                uint32_t tRc;
+                uint32_t tRcd;
+                uint32_t tRfc;
+                uint32_t tRp;
+                uint32_t tRrd;
+                uint32_t tWr;
+                uint32_t tWtr;
+                uint32_t tXp;
+                uint32_t tXsr;
+                uint32_t tEsr;
+                uint32_t memoryCfg2;
+                uint32_t memoryCfg3;
+                uint32_t tFaw;
+        } ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
+#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)     /* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT                        0
+#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT                        0
+#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT                         0
+#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT                        0
+#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT                        0
+#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT                         0
+#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT                        0
+#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT                         0
+#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT                        0
+#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT                         0
+#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT                        0
+#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT                        0
+#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT                            16
+#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
+
+        typedef struct {
+                uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+        } ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
+#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT                           4
+#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
+
+        typedef struct {
+                uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+        } ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
+#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
+
+        typedef struct {
+                uint32_t input;
+                uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+                uint32_t feature;
+        } ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
+#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+        typedef struct {
+                uint32_t revision;
+                uint32_t pmCtl;
+                 REG32_RSVD(0x0008, 0x0010);
+                uint32_t pllStatus;
+                uint32_t pllCfg;
+                uint32_t pllPreDiv;
+                uint32_t pllDiv;
+                uint32_t pllCtl1;
+                uint32_t pllCtl2;
+                uint32_t ssCtl;
+                uint32_t ssCfg;
+                uint32_t vdlStatic;
+                uint32_t vdlDynamic;
+                uint32_t padIdle;
+                uint32_t pvtComp;
+                uint32_t padDrive;
+                uint32_t clkRgltrCtl;
+        } ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10      /* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT                       2
+#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
+
+        typedef struct {
+                uint32_t revision;
+                uint32_t vdlCalibrate;
+                uint32_t vdlStatus;
+                 REG32_RSVD(0x000c, 0x0010);
+                uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+                uint32_t readCtl;
+                uint32_t readStatus;
+                uint32_t readClear;
+                uint32_t padIdleCtl;
+                uint32_t padDriveCtl;
+                uint32_t padClkCtl;
+                uint32_t writeCtl;
+                uint32_t clkRegCtl;
+        } ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+        typedef struct {
+                uint32_t cfg;
+                uint32_t actMonCnt;
+                uint32_t ctl;
+                uint32_t lbistCtl;
+                uint32_t lbistSeed;
+                uint32_t lbistStatus;
+                uint32_t tieOff;
+                uint32_t actMonClear;
+                uint32_t status;
+                uint32_t user;
+        } ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+}                               /* end extern "C" */
+#endif
+#endif                          /* DDRC_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 000000000000..375066ad0186
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_priv.h
+*
+*  @brief   Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+        uint32_t sar;           /* Source Adress Register.
+                                   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
+        uint32_t dar;           /* Destination Address Register.
+                                   Address must be aligned to CTLx.DST_TR_WIDTH.             */
+        uint32_t llpPhy;        /* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+                                   Address MUST be aligned to a 32-bit boundary.             */
+        dmacHw_REG64_t ctl;     /* Control Register. 64 bits */
+        uint32_t sstat;         /* Source Status Register */
+        uint32_t dstat;         /* Destination Status Register */
+        uint32_t devCtl;        /* Device specific control information */
+        uint32_t llp;           /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ *  Descriptor ring pointers
+ */
+typedef struct {
+        int num;                /* Number of link items */
+        dmacHw_DESC_t *pHead;   /* Head of descriptor ring (for writing) */
+        dmacHw_DESC_t *pTail;   /* Tail of descriptor ring (for reading) */
+        dmacHw_DESC_t *pProg;   /* Descriptor to program the channel (for programming the channel register) */
+        dmacHw_DESC_t *pEnd;    /* End of current descriptor chain */
+        dmacHw_DESC_t *pFree;   /* Descriptor to free memory (freeing dynamic memory) */
+        uint32_t virt2PhyOffset;        /* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ *  DMA channel control block
+ */
+typedef struct {
+        uint32_t module;        /* DMA controller module (0-1) */
+        uint32_t channel;       /* DMA channel (0-7) */
+        volatile uint32_t varDataStarted;       /* Flag indicating variable data channel is enabled */
+        volatile uint32_t descUpdated;  /* Flag to indicate descriptor update is complete */
+        void *userData;         /* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT          16
+#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
+#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE              4064
+#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+*  @brief   Get next available transaction width
+*
+*
+*  @return  On sucess  : Next avail able transaction width
+*           On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw    /*   [ IN ] Current transaction width */
+    ) {
+        if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+                return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+                         1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+        } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+                return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+                         1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+        }
+
+        /* Default return  */
+        return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get number of bytes per transaction
+*
+*  @return  Number of bytes per transaction
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw        /*   [ IN ]  Transaction width */
+    ) {
+        int width = 1;
+        switch (tw) {
+        case dmacHw_SRC_TRANSACTION_WIDTH_8:
+                width = 1;
+                break;
+        case dmacHw_SRC_TRANSACTION_WIDTH_16:
+        case dmacHw_DST_TRANSACTION_WIDTH_16:
+                width = 2;
+                break;
+        case dmacHw_SRC_TRANSACTION_WIDTH_32:
+        case dmacHw_DST_TRANSACTION_WIDTH_32:
+                width = 4;
+                break;
+        case dmacHw_SRC_TRANSACTION_WIDTH_64:
+        case dmacHw_DST_TRANSACTION_WIDTH_64:
+                width = 8;
+                break;
+        default:
+                dmacHw_ASSERT(0);
+        }
+
+        /* Default transaction width */
+        return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 000000000000..891cea87e333
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_reg.h
+*
+*  @brief   Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+        volatile uint32_t lo;   /* Lower 32 bit in little endian mode */
+        volatile uint32_t hi;   /* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+        dmacHw_REG64_t ChannelSar;      /*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+                                           Address must be aligned to CTLx.SRC_TR_WIDTH.
+                                         */
+        dmacHw_REG64_t ChannelDar;      /*  Destination Address Register.64 bits (upper 32 bits are reserved)
+                                           Address must be aligned to CTLx.DST_TR_WIDTH.
+                                         */
+        dmacHw_REG64_t ChannelLlp;      /*  Link List Pointer.64 bits (upper 32 bits are reserved)
+                                           LLP contains the pointer to the next LLI for block chaining using linked lists.
+                                           If LLPis set to 0x0, then transfers using linked lists are not enabled.
+                                           Address MUST be aligned to a 32-bit boundary.
+                                         */
+        dmacHw_REG64_t ChannelCtl;      /* Control Register. 64 bits */
+        dmacHw_REG64_t ChannelSstat;    /* Source Status Register */
+        dmacHw_REG64_t ChannelDstat;    /* Destination Status Register */
+        dmacHw_REG64_t ChannelSstatAddr;        /* Source Status Address Register */
+        dmacHw_REG64_t ChannelDstatAddr;        /* Destination Status Address Register */
+        dmacHw_REG64_t ChannelConfig;   /* Channel Configuration Register */
+        dmacHw_REG64_t SrcGather;       /* Source gather register */
+        dmacHw_REG64_t DstScatter;      /* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+        dmacHw_REG64_t RawTfr;  /* Raw Status for IntTfr Interrupt */
+        dmacHw_REG64_t RawBlock;        /* Raw Status for IntBlock Interrupt */
+        dmacHw_REG64_t RawSrcTran;      /* Raw Status for IntSrcTran Interrupt */
+        dmacHw_REG64_t RawDstTran;      /* Raw Status for IntDstTran Interrupt */
+        dmacHw_REG64_t RawErr;  /* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+        dmacHw_REG64_t StatusTfr;       /* Status for IntTfr Interrupt */
+        dmacHw_REG64_t StatusBlock;     /* Status for IntBlock Interrupt */
+        dmacHw_REG64_t StatusSrcTran;   /* Status for IntSrcTran Interrupt */
+        dmacHw_REG64_t StatusDstTran;   /* Status for IntDstTran Interrupt */
+        dmacHw_REG64_t StatusErr;       /* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+        dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */
+        dmacHw_REG64_t MaskBlock;       /* Mask for IntBlock Interrupt */
+        dmacHw_REG64_t MaskSrcTran;     /* Mask for IntSrcTran Interrupt */
+        dmacHw_REG64_t MaskDstTran;     /* Mask for IntDstTran Interrupt */
+        dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+        dmacHw_REG64_t ClearTfr;        /* Clear for IntTfr Interrupt */
+        dmacHw_REG64_t ClearBlock;      /* Clear for IntBlock Interrupt */
+        dmacHw_REG64_t ClearSrcTran;    /* Clear for IntSrcTran Interrupt */
+        dmacHw_REG64_t ClearDstTran;    /* Clear for IntDstTran Interrupt */
+        dmacHw_REG64_t ClearErr;        /* Clear for IntErr Interrupt */
+        dmacHw_REG64_t StatusInt;       /* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+        dmacHw_REG64_t ReqSrcReg;       /* Source Software Transaction Request Register */
+        dmacHw_REG64_t ReqDstReg;       /* Destination Software Transaction Request Register */
+        dmacHw_REG64_t SglReqSrcReg;    /* Single Source Transaction Request Register */
+        dmacHw_REG64_t SglReqDstReg;    /* Single Destination Transaction Request Register */
+        dmacHw_REG64_t LstSrcReg;       /* Last Source Transaction Request Register */
+        dmacHw_REG64_t LstDstReg;       /* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+        dmacHw_REG64_t DmaCfgReg;       /* DMA Configuration Register */
+        dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */
+        dmacHw_REG64_t DmaIdReg;        /* DMA ID Register */
+        dmacHw_REG64_t DmaTestReg;      /* DMA Test Register */
+        dmacHw_REG64_t Reserved0;       /* Reserved */
+        dmacHw_REG64_t Reserved1;       /* Reserved */
+        dmacHw_REG64_t CompParm6;       /* Component Parameter 6 */
+        dmacHw_REG64_t CompParm5;       /* Component Parameter 5 */
+        dmacHw_REG64_t CompParm4;       /* Component Parameter 4 */
+        dmacHw_REG64_t CompParm3;       /* Component Parameter 3 */
+        dmacHw_REG64_t CompParm2;       /* Component Parameter 2 */
+        dmacHw_REG64_t CompParm1;       /* Component Parameter 1 */
+        dmacHw_REG64_t CompId;  /* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0       /* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1       /* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN                       0x00000001  /* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E  /* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000  /* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002  /* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004  /* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006  /* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070  /* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000  /* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010  /* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020  /* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030  /* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000  /* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000  /* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK                    0x00000180  /* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC                     0x00000000  /* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC                     0x00000080  /* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC                      0x00000100  /* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK                    0x00000600  /* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC                     0x00000000  /* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC                     0x00000200  /* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC                      0x00000400  /* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800  /* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000  /* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800  /* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000  /* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800  /* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000  /* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000  /* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000  /* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000  /* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000  /* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000  /* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000  /* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000  /* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000  /* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000  /* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000  /* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000  /* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000  /* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000  /* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK                     0x01800000  /* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1                        0x00000000  /* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2                        0x00800000  /* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK                     0x06000000  /* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1                        0x00000000  /* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2                        0x02000000  /* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000  /* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000  /* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF  /* Block transfer size */
+#define dmacHw_REG_CTL_DONE                         0x00001000  /* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5  /* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0  /* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000  /* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020  /* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040  /* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060  /* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080  /* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0  /* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0  /* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0  /* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100  /* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200  /* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400  /* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800  /* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000  /* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000  /* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000  /* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000  /* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000  /* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000  /* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000  /* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000  /* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000  /* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000  /* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000  /* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000  /* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000  /* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000  /* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000  /* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001  /* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002  /* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C  /* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004  /* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008  /* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010  /* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020  /* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040  /* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780  /* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800  /* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700  /* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800  /* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f  /* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000  /* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 000000000000..cfa91bed9d34
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
+/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+  #if (CFG_GLOBAL_CHIP == FPGA11107)
+     #define HW_CFG_BUS_CLK_HZ            5000000
+     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
+     #define HW_CFG_DDR_PHY_OMIT
+     #define HW_CFG_UART_CLK_HZ           7500000
+  #else
+     #define HW_CFG_PLL_VCO_HZ           2000000000
+     #define HW_CFG_PLL2_VCO_HZ          1800000000
+     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
+     #define HW_CFG_BUS_CLK_HZ            166666666
+     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
+     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+     #define HW_CFG_UART_CLK_HZ           142857142
+     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
+  #endif
+#else
+   #define HW_CFG_PLL_VCO_HZ           1800000000
+   #define HW_CFG_PLL2_VCO_HZ          1800000000
+   #define HW_CFG_ARM_CLK_HZ            450000000
+   #define HW_CFG_BUS_CLK_HZ            150000000
+   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
+   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+   #define HW_CFG_UART_CLK_HZ           150000000
+   #define HW_CFG_VPM_CLK_HZ            300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 000000000000..e01fc4607c91
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    intcHw_reg.h
+*
+*  @brief   platform specific interrupt controller bit assignments
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC   32    /* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC           3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM           31    /* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM          30    /* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM            29    /* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM           28    /* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM           27    /* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM          26    /* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM        25    /* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM        24    /* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM        23    /* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM        22    /* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM        21    /* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM        20    /* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM          19    /* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM         18    /* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM        17    /* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM           16    /* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM        15    /* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM        14    /* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM        13    /* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM        12    /* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM        11    /* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM        10    /* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM         9    /* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM         8    /* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM         7    /* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM         6    /* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM         5    /* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM         4    /* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM         3    /* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM         2    /* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM         1    /* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM         0    /* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27    /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM       26    /* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM          26    /* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM          25    /* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM          24    /* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM          23    /* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM          22    /* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM          21    /* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM           20    /* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM          19    /* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM          18    /* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM          17    /* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM          16    /* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM           15    /* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM         14    /* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM          13    /* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM         12    /* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM        11    /* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM        10    /* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM         9    /* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM         8    /* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM           7    /* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM           6    /* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM           5    /* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM           4    /* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM           3    /* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM           2    /* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM          1    /* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM          0    /* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM          15    /* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM        14    /* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM        13    /* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM        12    /* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM        11    /* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM          10    /* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM           9    /* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM           8    /* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM            7    /* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM           6    /* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM           5    /* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM           4    /* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM           3    /* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM            2    /* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM          1    /* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM           0    /* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS      0x00      /* IRQ status register */
+#define INTCHW_FIQSTATUS      0x04      /* FIQ status register */
+#define INTCHW_RAWINTR        0x08      /* Raw Interrupt Status register */
+#define INTCHW_INTSELECT      0x0c      /* Interrupt Select Register */
+#define INTCHW_INTENABLE      0x10      /* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR     0x14      /* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT        0x18      /* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR   0x1c      /* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION     0x20      /* Protection Enable Register */
+#define INTCHW_SWPRIOMASK     0x24      /* Software Priority Mask Register */
+#define INTCHW_PRIODAISY      0x28      /* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0      0x100     /* Vector Address Registers */
+#define INTCHW_VECTPRIO0      0x200     /* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS        0xf00     /* Vector Address Register 0-31 */
+#define INTCHW_PID            0xfe0     /* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID        0xff0     /* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+        __REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+        __REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 000000000000..86bb58d4f58c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_addr.h
+*
+*  @brief   Memory Map address defintions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*  Memory Map address definitions */
+
+#define MM_ADDR_DDR                0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000   /* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC          0x20000000
+#define MM_ADDR_IO_BROM            0x30000000
+#define MM_ADDR_IO_ARAM            0x30100000   /* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0            0x30200000
+#define MM_ADDR_IO_DMA1            0x30300000
+#define MM_ADDR_IO_ESW             0x30400000
+#define MM_ADDR_IO_CLCD            0x30500000
+#define MM_ADDR_IO_PIF             0x30580000
+#define MM_ADDR_IO_APM             0x30600000
+#define MM_ADDR_IO_SPUM            0x30700000
+#define MM_ADDR_IO_VPM_PROG        0x30800000
+#define MM_ADDR_IO_VPM_DATA        0x30A00000
+#define MM_ADDR_IO_VRAM            0x40000000   /* 64 KB  - security block in front of it */
+#define MM_ADDR_IO_CHIPC           0x80000000
+#define MM_ADDR_IO_UMI             0x80001000
+#define MM_ADDR_IO_NAND            0x80001800
+#define MM_ADDR_IO_LEDM            0x80002000
+#define MM_ADDR_IO_PWM             0x80002040
+#define MM_ADDR_IO_VINTC           0x80003000
+#define MM_ADDR_IO_GPIO0           0x80004000
+#define MM_ADDR_IO_GPIO1           0x80004800
+#define MM_ADDR_IO_I2CS            0x80005000
+#define MM_ADDR_IO_SPIS            0x80006000
+#define MM_ADDR_IO_HPM             0x80007400
+#define MM_ADDR_IO_HPM_REMAP       0x80007800
+#define MM_ADDR_IO_TZPC            0x80008000
+#define MM_ADDR_IO_MPU             0x80009000
+#define MM_ADDR_IO_SPUMP           0x8000a000
+#define MM_ADDR_IO_PKA             0x8000b000
+#define MM_ADDR_IO_RNG             0x8000c000
+#define MM_ADDR_IO_KEYC            0x8000d000
+#define MM_ADDR_IO_BBL             0x8000e000
+#define MM_ADDR_IO_OTP             0x8000f000
+#define MM_ADDR_IO_I2S0            0x80010000
+#define MM_ADDR_IO_I2S1            0x80011000
+#define MM_ADDR_IO_UARTA           0x80012000
+#define MM_ADDR_IO_UARTB           0x80013000
+#define MM_ADDR_IO_I2CH            0x80014020
+#define MM_ADDR_IO_SPIH            0x80015000
+#define MM_ADDR_IO_TSC             0x80016000
+#define MM_ADDR_IO_TMR             0x80017000
+#define MM_ADDR_IO_WATCHDOG        0x80017800
+#define MM_ADDR_IO_ETM             0x80018000
+#define MM_ADDR_IO_DDRC            0x80019000
+#define MM_ADDR_IO_SINTC           0x80100000
+#define MM_ADDR_IO_INTC0           0x80200000
+#define MM_ADDR_IO_INTC1           0x80201000
+#define MM_ADDR_IO_GE              0x80300000
+#define MM_ADDR_IO_USB_CTLR0       0x80400000
+#define MM_ADDR_IO_USB_CTLR1       0x80410000
+#define MM_ADDR_IO_USB_PHY         0x80420000
+#define MM_ADDR_IO_SDIOH0          0x80500000
+#define MM_ADDR_IO_SDIOH1          0x80600000
+#define MM_ADDR_IO_VDEC            0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 000000000000..de92ec6a01aa
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_io.h
+*
+*  @brief   Memory Map I/O definitions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory.  For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+                        (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+                        ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC   /* Physical beginning of IO mapped memory */
+#define MM_IO_BASE  MM_IO_BASE_FLASHC   /* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 000000000000..d15f5f3ec2d8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_def.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
+#define secHw_BLK_MASK_KEY_SCAN         0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
+#define secHw_BLK_MASK_UART0            0x00000008
+#define secHw_BLK_MASK_UART1            0x00000010
+#define secHw_BLK_MASK_WATCHDOG         0x00000020
+#define secHw_BLK_MASK_SPUM             0x00000040
+#define secHw_BLK_MASK_DDR2             0x00000080
+#define secHw_BLK_MASK_EXT_MEM          0x00000100
+#define secHw_BLK_MASK_ESW              0x00000200
+#define secHw_BLK_MASK_SPU              0x00010000
+#define secHw_BLK_MASK_PKA              0x00020000
+#define secHw_BLK_MASK_RNG              0x00040000
+#define secHw_BLK_MASK_RTC              0x00080000
+#define secHw_BLK_MASK_OTP              0x00100000
+#define secHw_BLK_MASK_BOOT             0x00200000
+#define secHw_BLK_MASK_MPU              0x00400000
+#define secHw_BLK_MASK_TZCTRL           0x00800000
+#define secHw_BLK_MASK_INTR             0x01000000
+
+/* Trustzone register set */
+typedef struct {
+        volatile uint32_t status;       /* read only - reflects status of writes of 2 write registers */
+        volatile uint32_t setUnsecure;  /* write only. reads back as 0 */
+        volatile uint32_t setSecure;    /* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+        secHw_IDX_LS = 0,
+        secHw_IDX_MS = 1,
+        secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+        volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask        /*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask      /*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 000000000000..9cd6a032ab71
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_inline.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask        /*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+        secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+        if (mask & 0x0000FFFF) {
+                regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+        }
+
+        if (mask & 0xFFFF0000) {
+                regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask      /*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+        secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+        if (mask & 0x0000FFFF) {
+                regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+        }
+        if (mask & 0xFFFF0000) {
+                regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+        }
+}
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+        secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+        return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 000000000000..3080ac7239a1
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25      /* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150     /* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)    /* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)     /* Number of timer module supported */
+
+typedef struct {
+        uint32_t LoadValue;     /* Load value for timer */
+        uint32_t CurrentValue;  /* Current value for timer */
+        uint32_t Control;       /* Control register */
+        uint32_t InterruptClear;        /* Interrupt clear register */
+        uint32_t RawInterruptStatus;    /* Raw interrupt status */
+        uint32_t InterruptStatus;       /* Masked interrupt status */
+        uint32_t BackgroundLoad;        /* Background load value */
+        uint32_t padding;       /* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 000000000000..847980c85c88
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.h
+*
+*   @brief  API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION   1
+
+#define DMA_NUM_CONTROLLERS     2
+#define DMA_NUM_CHANNELS        8       /* per controller */
+
+typedef enum {
+        DMA_DEVICE_MEM_TO_MEM,  /* For memory to memory transfers */
+        DMA_DEVICE_I2S0_DEV_TO_MEM,
+        DMA_DEVICE_I2S0_MEM_TO_DEV,
+        DMA_DEVICE_I2S1_DEV_TO_MEM,
+        DMA_DEVICE_I2S1_MEM_TO_DEV,
+        DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+        DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+        DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+        DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+        DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,      /* Additional mic input for beam-forming */
+        DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+        DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+        DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+        DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+        DMA_DEVICE_SPUM_DEV_TO_MEM,
+        DMA_DEVICE_SPUM_MEM_TO_DEV,
+        DMA_DEVICE_SPIH_DEV_TO_MEM,
+        DMA_DEVICE_SPIH_MEM_TO_DEV,
+        DMA_DEVICE_UART_A_DEV_TO_MEM,
+        DMA_DEVICE_UART_A_MEM_TO_DEV,
+        DMA_DEVICE_UART_B_DEV_TO_MEM,
+        DMA_DEVICE_UART_B_MEM_TO_DEV,
+        DMA_DEVICE_PIF_MEM_TO_DEV,
+        DMA_DEVICE_PIF_DEV_TO_MEM,
+        DMA_DEVICE_ESW_DEV_TO_MEM,
+        DMA_DEVICE_ESW_MEM_TO_DEV,
+        DMA_DEVICE_VPM_MEM_TO_MEM,
+        DMA_DEVICE_CLCD_MEM_TO_MEM,
+        DMA_DEVICE_NAND_MEM_TO_MEM,
+        DMA_DEVICE_MEM_TO_VRAM,
+        DMA_DEVICE_VRAM_TO_MEM,
+
+        /* Add new entries before this line. */
+
+        DMA_NUM_DEVICE_ENTRIES,
+        DMA_DEVICE_NONE = 0xff, /* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+*   The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
+*   to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+        void *virtAddr;         /* Virtual Address of the descriptor ring */
+        dma_addr_t physAddr;    /* Physical address of the descriptor ring */
+        int descriptorsAllocated;       /* Number of descriptors allocated in the descriptor ring */
+        size_t bytesAllocated;  /* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+*   DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE    4096    /* Pages less than this size are better */
+                                        /* off not being DMA'd. */
+
+typedef enum {
+        DMA_MEM_TYPE_NONE,      /* Not a valid setting */
+        DMA_MEM_TYPE_VMALLOC,   /* Memory came from vmalloc call */
+        DMA_MEM_TYPE_KMALLOC,   /* Memory came from kmalloc call */
+        DMA_MEM_TYPE_DMA,       /* Memory came from dma_alloc_xxx call */
+        DMA_MEM_TYPE_USER,      /* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+        void *virtAddr;         /* Virtual address used for this segment */
+        dma_addr_t physAddr;    /* Physical address this segment maps to */
+        size_t numBytes;        /* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+        DMA_MemType_t memType;
+        void *virtAddr;
+        size_t numBytes;
+
+        /* Each region (virtually contiguous) consists of one or more segments. Each */
+        /* segment is virtually and physically contiguous. */
+
+        int numSegmentsUsed;
+        int numSegmentsAllocated;
+        DMA_Segment_t *segment;
+
+        /* When a region corresponds to user memory, we need to lock all of the pages */
+        /* down before we can figure out the physical addresses. The lockedPage array contains */
+        /* the pages that were locked, and which subsequently need to be unlocked once the */
+        /* memory is unmapped. */
+
+        unsigned numLockedPages;
+        struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+        int inUse;              /* Is this mapping currently being used? */
+        struct semaphore lock;  /* Acquired when using this structure */
+        enum dma_data_direction dir;    /* Direction this transfer is intended for */
+
+        /* In the event that we're mapping user memory, we need to know which task */
+        /* the memory is for, so that we can obtain the correct mm locks. */
+
+        struct task_struct *userTask;
+
+        int numRegionsUsed;
+        int numRegionsAllocated;
+        DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+*   The DMA_DeviceAttribute_t contains information which describes a
+*   particular DMA device (or peripheral).
+*
+*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+*   statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+                                     void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004  /* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008  /* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
+#define DMA_DEVICE_FLAG_IN_USE              0x00000800  /* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/*       determine which DMA controllers a given device can be used from, and the interface */
+/*       array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+        uint32_t flags;         /* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+        uint8_t dedicatedController;    /* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+        uint8_t dedicatedChannel;       /* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+        const char *name;       /* Will show up in the /proc entry */
+
+        uint32_t dmacPort[DMA_NUM_CONTROLLERS]; /* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+        dmacHw_CONFIG_t config; /* Configuration to use when DMA'ing using this device */
+
+        void *userData;         /* Passed to the devHandler */
+        DMA_DeviceHandler_t devHandler; /* Called when DMA operations finish. */
+
+        timer_tick_count_t transferStartTime;   /* Time the current transfer was started */
+
+        /* The following statistical information will be collected and presented in a proc entry. */
+        /* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+        /*       a 64 bit counter. */
+
+        uint64_t numTransfers;  /* Number of DMA transfers performed */
+        uint64_t transferTicks; /* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+        uint64_t transferBytes; /* Total bytes transferred */
+        uint32_t timesBlocked;  /* Number of times a channel was unavailable */
+        uint32_t numBytes;      /* Last transfer size */
+
+        /* It's not possible to free memory which is allocated for the descriptors from within */
+        /* the ISR. So make the presumption that a given device will tend to use the */
+        /* same sized buffers over and over again, and we keep them around. */
+
+        DMA_DescriptorRing_t ring;      /* Ring of descriptors allocated for this device */
+
+        /* We stash away some of the information from the previous transfer. If back-to-back */
+        /* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+        /* the descriptor buffers. */
+
+        uint32_t prevNumBytes;
+        dma_addr_t prevSrcData;
+        dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+*   data structures and don't belong in this header file, but are included
+*   merely for discussion.
+*
+*   By the time this is implemented, these structures will be moved out into
+*   the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+*   The DMA_Channel_t contains state information about each DMA channel. Some
+*   of the channels are dedicated. Non-dedicated channels are shared
+*   amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
+
+typedef struct {
+        uint32_t flags;         /* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+        DMA_Device_t devType;   /* Device this channel is currently reserved for */
+        DMA_Device_t lastDevType;       /* Device type that used this previously */
+        char name[20];          /* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+        const char *fileName;   /* Place where channel reservation took place */
+        int lineNum;            /* Place where channel reservation took place */
+#endif
+        dmacHw_HANDLE_t dmacHwHandle;   /* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+*   The DMA_Controller_t contains state information about each DMA controller.
+*
+*   The freeChannelQ is stored in the controller data structure rather than
+*   the channel data structure since several of the devices are accessible
+*   from multiple controllers, and there is no way to know which controller
+*   will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+        DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+*   The DMA_Global_t contains all of the global state information used by
+*   the DMA code.
+*
+*   Callers which need to allocate a shared channel will be queued up
+*   on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+        struct semaphore lock;  /* acquired when manipulating table entries */
+        wait_queue_head_t freeChannelQ;
+
+        DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+*   Initializes the DMA module.
+*
+*   @return
+*       0       - Success
+*       < 0     - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+                                     int lineNum);
+#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev       /* Device to use with the allocated channel. */
+    );
+#endif
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*
+*   @return
+*        0      - DMA Handle was released successfully.
+*       -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel       /* DMA handle. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return boolean
+*       0           Device uses a dedicated channel
+*       non-zero    Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev       /* Device to check. */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,       /* Descriptor ring to populate */
+                              int numDescriptors        /* Number of descriptors that need to be allocated. */
+    );
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring        /* Descriptor to release */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,        /* Descriptor ring to initialize */
+                             int numDescriptors /* Number of descriptors to initialize. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */
+                                   dma_addr_t srcData,  /* Place to get data to write to device */
+                                   dma_addr_t dstData,  /* Pointer to device data address */
+                                   size_t numBytes      /* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,     /* Descriptor ring to add descriptors to */
+                        DMA_Device_t device,    /* DMA Device that descriptors are for */
+                        dma_addr_t srcData,     /* Place to get data (memory or device) */
+                        dma_addr_t dstData,     /* Place to put data (memory or device) */
+                        size_t numBytes /* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */
+                                   DMA_DescriptorRing_t *ring   /* Descriptor ring to add descriptors to */
+    );
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */
+                                   DMA_DescriptorRing_t *ring   /* Place to store retrieved ring */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,  /* DMA Handle */
+                          dmacHw_TRANSFER_TYPE_e transferType,  /* Type of transfer being performed */
+                          dma_addr_t srcData,   /* Place to get data to write to device */
+                          dma_addr_t dstData,   /* Pointer to device data address */
+                          size_t numBytes       /* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,       /* DMA Handle */
+                                     dma_addr_t srcData,        /* Physical address of source data */
+                                     dma_addr_t dstData1,       /* Physical address of first destination buffer */
+                                     dma_addr_t dstData2,       /* Physical address of second destination buffer */
+                                     size_t numBytes    /* Number of bytes in each destination buffer */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap       /* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap       /* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+*   Sets the process (aka userTask) associated with a mem map. This is
+*   required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+                                             struct task_struct *task)
+{
+        memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+*   Initializes a memory map for use. Since this function acquires a
+*   sempaphore within the memory map, it is VERY important that dma_unmap
+*   be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
+                  enum dma_data_direction dir   /* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,    /* Stores state information about the map */
+                       void *mem,       /* Virtual address that we want to get a map of */
+                       size_t numBytes  /* Number of bytes being mapped */
+    );
+
+/****************************************************************************/
+/**
+*   Creates a descriptor ring from a memory mapping.
+*
+*   @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,    /* DMA device (where the ring is stored) */
+                                   DMA_MemMap_t *memMap,        /* Memory map that will be used */
+                                   dma_addr_t devPhysAddr       /* Physical address of device */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,   /* Stores state information about the map */
+                void *addr,     /* Virtual address that we want to get a map of */
+                size_t count,   /* Number of bytes being mapped */
+                enum dma_data_direction dir     /* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,     /* Stores state information about the map */
+              int dirtied       /* non-zero if any of the pages were modified */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA transfer
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,   /* DMA Handle */
+                 dmacHw_TRANSFER_TYPE_e transferType,   /* Type of transfer being performed */
+                 dma_addr_t srcData,    /* Place to get data to write to device */
+                 dma_addr_t dstData,    /* Pointer to device data address */
+                 size_t numBytes        /* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from memory to a device.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle,   /* DMA Handle */
+                                         dma_addr_t srcData,    /* Place to get data to write to device (physical address) */
+                                         dma_addr_t dstData,    /* Pointer to device data address (physical address) */
+                                         size_t numBytes        /* Number of bytes to transfer to the device */
+    ) {
+        return dma_transfer(handle,
+                            dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+                            srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from a device to memory.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle, /* DMA Handle */
+                                           dma_addr_t srcData,  /* Pointer to the device data address (physical address) */
+                                           dma_addr_t dstData,  /* Place to store data retrieved from the device (physical address) */
+                                           size_t numBytes      /* Number of bytes to retrieve from the device */
+    ) {
+        return dma_transfer(handle,
+                            dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+                            srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a memory to memory transfer.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,  /* DMA Handle */
+                                          dma_addr_t srcData,   /* Place to transfer data from (physical address) */
+                                          dma_addr_t dstData,   /* Place to transfer data to (physical address) */
+                                          size_t numBytes       /* Number of bytes to transfer */
+    ) {
+        return dma_transfer(handle,
+                            dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+                            srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,    /* Device to set the callback for. */
+                           DMA_DeviceHandler_t devHandler,      /* Function to call when the DMA completes */
+                           void *userData       /* Pointer which will be passed to devHandler. */
+    );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7d393ca010ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+                .macro  disable_fiq
+                .endm
+
+                .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+                ldr     \base, =(MM_IO_BASE_INTC0)
+                ldr     \irqstat, [\base, #0]           @ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+                mov     \irqnr, #IRQ_INTC0_START
+                cmp     \irqstat, #0
+                bne     1001f
+
+                ldr     \base, =(MM_IO_BASE_INTC1)
+                ldr     \irqstat, [\base, #0]           @ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+                mov     \irqnr, #IRQ_INTC1_START
+                cmp     \irqstat, #0
+                bne     1001f
+
+                ldr     \base, =(MM_IO_BASE_SINTC)
+                ldr     \irqstat, [\base, #0]           @ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+                mov     \irqnr, #0xffffffff             @ code meaning no interrupt bits set
+                cmp     \irqstat, #0
+                beq     1002f
+
+                mov     \irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
+
+1001:
+                movs    \tmp, \irqstat, lsl #16
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #16
+
+                movs    \tmp, \irqstat, lsl #8
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #8
+
+                movs    \tmp, \irqstat, lsl #4
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #4
+
+                movs    \tmp, \irqstat, lsl #2
+                movne   \irqstat, \tmp
+                addeq   \irqnr, \irqnr, #2
+
+                movs    \tmp, \irqstat, lsl #1
+                addeq   \irqnr, \irqnr, #1
+                orrs    \base, \base, #1
+
+1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
+                .endm
+
+                .macro  get_irqnr_preamble, base, tmp
+                .endm
+
+                .macro  arch_ret_to_user, tmp1, tmp2
+                .endm
+
+                .macro  irq_prio_table
+                .endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 000000000000..447eb340c611
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ *  This file contains the hardware definitions of the BCMRing.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START               PHYS_OFFSET
+
+#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE                PAGE_OFFSET
+
+#define pcibios_assign_all_busses()     1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 000000000000..4db0eff90357
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c)        __raw_readb(c)
+#define readw(c)        __raw_readw(c)
+#define readl(c)        __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l)   __raw_readsb(p, d, l)
+#define readsw(p, d, l)   __raw_readsw(p, d, l)
+#define readsl(p, d, l)   __raw_readsl(p, d, l)
+
+#define writeb(v, c)     __raw_writeb(v, c)
+#define writew(v, c)     __raw_writew(v, c)
+#define writel(v, c)     __raw_writel(v, c)
+
+#define writesb(p, d, l)  __raw_writesb(p, d, l)
+#define writesw(p, d, l)  __raw_writesw(p, d, l)
+#define writesl(p, d, l)  __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l)    _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 000000000000..b279b825d4a7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2007 Broadcom
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START     0
+#define IRQ_DMA0C0          0   /* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1          1   /* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2          2   /* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3          3   /* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4          4   /* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5          5   /* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6          6   /* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7          7   /* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0          8   /* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1          9   /* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2         10   /* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3         11   /* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4         12   /* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5         13   /* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6         14   /* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7         15   /* DMA1 channel 7 interrupt */
+#define IRQ_VPM            16   /* Voice process module interrupt */
+#define IRQ_USBHD2         17   /* USB host2/device2 interrupt */
+#define IRQ_USBH1          18   /* USB1 host interrupt */
+#define IRQ_USBD           19   /* USB device interrupt */
+#define IRQ_SDIOH0         20   /* SDIO0 host interrupt */
+#define IRQ_SDIOH1         21   /* SDIO1 host interrupt */
+#define IRQ_TIMER0         22   /* Timer0 interrupt */
+#define IRQ_TIMER1         23   /* Timer1 interrupt */
+#define IRQ_TIMER2         24   /* Timer2 interrupt */
+#define IRQ_TIMER3         25   /* Timer3 interrupt */
+#define IRQ_SPIH           26   /* SPI host interrupt */
+#define IRQ_ESW            27   /* Ethernet switch interrupt */
+#define IRQ_APM            28   /* Audio process module interrupt */
+#define IRQ_GE             29   /* Graphic engine interrupt */
+#define IRQ_CLCD           30   /* LCD Controller interrupt */
+#define IRQ_PIF            31   /* Peripheral interface interrupt */
+#define IRQ_INTC0_END      31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START    32
+#define IRQ_GPIO0          32   /*  0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1          33   /*  1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0           34   /*  2 I2S0 interrupt */
+#define IRQ_I2S1           35   /*  3 I2S1 interrupt */
+#define IRQ_I2CH           36   /*  4 I2C host interrupt */
+#define IRQ_I2CS           37   /*  5 I2C slave interrupt */
+#define IRQ_SPIS           38   /*  6 SPI slave interrupt */
+#define IRQ_GPHY           39   /*  7 Gigabit Phy interrupt */
+#define IRQ_FLASHC         40   /*  8 Flash controller interrupt */
+#define IRQ_COMMTX         41   /*  9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX         42   /* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ         43   /* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB          44   /* 12 UARTB */
+#define IRQ_WATCHDOG       45   /* 13 Watchdog timer interrupt */
+#define IRQ_UARTA          46   /* 14 UARTA */
+#define IRQ_TSC            47   /* 15 Touch screen controller interrupt */
+#define IRQ_KEYC           48   /* 16 Key pad controller interrupt */
+#define IRQ_DMPU           49   /* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU           50   /* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU           51   /* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG            52   /* 20 Random number generator interrupt */
+#define IRQ_RTC0           53   /* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1           54   /* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM           55   /* 23 Secure process module interrupt */
+#define IRQ_VDEC           56   /* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2           57   /* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP           58   /* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END      58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START    59
+#define IRQ_SEC_WATCHDOG   59   /*  0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA      60   /*  1 UARTA interrupt */
+#define IRQ_SEC_TSC        61   /*  2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC       62   /*  3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU       63   /*  4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU       64   /*  5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU       65   /*  6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG        66   /*  7 Random number generator interrupt */
+#define IRQ_SEC_RTC0       67   /*  8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1       68   /*  9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM       69   /* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0     70   /* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1     71   /* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2     72   /* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3     73   /* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2       74   /* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END      74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/*       to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0                  100
+
+#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS               62
+
+#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN                 -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK        0xffffffff
+#define IRQ_INTC1_VALID_MASK        0x07ffffff
+#define IRQ_SINTC_VALID_MASK        0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 000000000000..114f942bb4f3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 000000000000..ce5cd16f2ac4
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA  (5 << 16)     /* Bus turnaround cycle (n)        0-7  (30 ns) */
+#define HW_CFG_NAND_tWP   (4 << 11)     /* Write pulse width cycle (n+1)   0-31 (25 ns) */
+#define HW_CFG_NAND_tWR   (1 << 9)      /* Write recovery cycle (n+1)      0-3  (10 ns) */
+#define HW_CFG_NAND_tAS   (0 << 7)      /* Write address setup cycle (n+1) 0-3  ( 0 ns) */
+#define HW_CFG_NAND_tOE   (3 << 5)      /* Output enable delay cycle (n)   0-3  (15 ns) */
+#define HW_CFG_NAND_tRC   (7 << 0)      /* Read access cycle (n+2)         0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+        | HW_CFG_NAND_tWP  \
+        | HW_CFG_NAND_tWR  \
+        | HW_CFG_NAND_tAS  \
+        | HW_CFG_NAND_tOE  \
+        | HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19)  /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA      (0 << 16)  /* Bus turnaround cycle (n)                                 (DNA)      */
+#define HW_CFG_NOR_TWP       (6 << 11)  /* Write pulse width cycle (n+1)                            (35ns)     */
+#define HW_CFG_NOR_TWR       (0 << 9)   /* Write recovery cycle (n+1)                               (0ns)      */
+#define HW_CFG_NOR_TAS       (0 << 7)   /* Write address setup cycle (n+1)                          (0ns)      */
+#define HW_CFG_NOR_TOE       (0 << 5)   /* Output enable delay cycle (n)                            (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)        /* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+        | HW_CFG_NOR_TBTA      \
+        | HW_CFG_NOR_TWP       \
+        | HW_CFG_NOR_TWR       \
+        | HW_CFG_NOR_TAS       \
+        | HW_CFG_NOR_TOE       \
+        | HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000      /* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 000000000000..cdbf93c694a6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+        printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+        if (mode == 'h') {
+                /* Reboot configured in proc entry */
+                if (bcmring_arch_warm_reboot) {
+                        printk("warm reset\n");
+                        /* Issue Warm reset (do not reset ethernet switch, keep alive) */
+                        chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+                } else {
+                        /* Force reset of everything */
+                        printk("force reset\n");
+                        chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+                }
+        } else {
+                /* Force reset of everything */
+                printk("force reset\n");
+                chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+        }
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 000000000000..5a94bbb032b6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  timer.h
+*
+*  PURPOSE:
+*
+*
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+*  timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+*  timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+*  timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+*  timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 000000000000..40d033ec5892
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE         100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 000000000000..9c9821b77977
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+        /* Send out UARTA */
+        while (BCMRING_UART_0_FR & (1 << 5))
+                ;
+
+        BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+        /* Wait for the tx fifo to be empty */
+        while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+                ;
+
+        /* Wait for the final character to be sent on the txd line */
+        while (BCMRING_UART_0_FR & (1 << 3))
+                ;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 000000000000..35e2ead8395c
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 000000000000..dc1c4939b0ce
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+        writel(1 << (irq - IRQ_INTC0_START),
+               MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+        writel(1 << (irq - IRQ_INTC0_START),
+               MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+        writel(1 << (irq - IRQ_INTC1_START),
+               MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+        writel(1 << (irq - IRQ_INTC1_START),
+               MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+        writel(1 << (irq - IRQ_SINTC_START),
+               MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+        writel(1 << (irq - IRQ_SINTC_START),
+               MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+        .typename = "ARM-INTC0",
+        .ack = bcmring_mask_irq0,
+        .mask = bcmring_mask_irq0,      /* mask a specific interrupt, blocking its delivery. */
+        .unmask = bcmring_unmask_irq0,  /* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+        .typename = "ARM-INTC1",
+        .ack = bcmring_mask_irq1,
+        .mask = bcmring_mask_irq1,
+        .unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+        .typename = "ARM-SINTC",
+        .ack = bcmring_mask_irq2,
+        .mask = bcmring_mask_irq2,
+        .unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+                     unsigned int irq_start, unsigned int vic_sources)
+{
+        unsigned int i;
+        for (i = 0; i < 32; i++) {
+                unsigned int irq = irq_start + i;
+                set_irq_chip(irq, chip);
+                set_irq_chip_data(irq, base);
+
+                if (vic_sources & (1 << i)) {
+                        set_irq_handler(irq, handle_level_irq);
+                        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+                }
+        }
+        writel(0, base + INTCHW_INTSELECT);
+        writel(0, base + INTCHW_INTENABLE);
+        writel(~0, base + INTCHW_INTENCLEAR);
+        writel(0, base + INTCHW_IRQSTATUS);
+        writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+        vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+                 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+        vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+                 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+        vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+                 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+        /* special cases */
+        if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+                set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+        }
+        if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+                set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+        }
+}
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 000000000000..0f1c37e4523a
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+        .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+        .length = sz, \
+        .type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+        .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+        .length = sz, \
+        .type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+        IO_DESC(MM_IO_BASE_NAND, SZ_64K),       /* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
+        IO_DESC(MM_IO_BASE_UMI, SZ_64K),        /* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
+
+        IO_DESC(MM_IO_BASE_BROM, SZ_64K),       /* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
+        MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),       /* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_DMA0, SZ_1M),        /* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_DMA1, SZ_1M),        /* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_ESW, SZ_1M), /* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_CLCD, SZ_1M),        /* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_APM, SZ_1M), /* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_SPUM, SZ_1M),        /* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),    /* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),    /* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
+
+        IO_DESC(MM_IO_BASE_VRAM, SZ_64K),       /* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
+        IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),      /* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
+        IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+                SZ_16M),        /* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+        iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 000000000000..2d415d2a8e68
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+        return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+        return tmrHw_GetCurrentCount(PROF_TIMER);       /* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+        static int tickRateMsec;
+
+        if (tickRateMsec == 0) {
+                tickRateMsec = timer_get_tick_rate() / 1000;
+        }
+
+        return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+        return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);