aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91rm9200/board-ek.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91rm9200/board-ek.c')
-rw-r--r--arch/arm/mach-at91rm9200/board-ek.c131
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c
new file mode 100644
index 000000000000..d140645711be
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-ek.c
@@ -0,0 +1,131 @@
1/*
2 * linux/arch/arm/mach-at91rm9200/board-ek.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * Epson S1D framebuffer glue code is:
7 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/config.h>
25#include <linux/types.h>
26#include <linux/init.h>
27#include <linux/mm.h>
28#include <linux/module.h>
29#include <linux/platform_device.h>
30
31#include <asm/hardware.h>
32#include <asm/setup.h>
33#include <asm/mach-types.h>
34#include <asm/irq.h>
35
36#include <asm/mach/arch.h>
37#include <asm/mach/map.h>
38#include <asm/mach/irq.h>
39
40#include <asm/arch/hardware.h>
41#include <asm/mach/serial_at91rm9200.h>
42#include <asm/arch/board.h>
43
44#include "generic.h"
45
46static void __init ek_init_irq(void)
47{
48 /* Initialize AIC controller */
49 at91rm9200_init_irq(NULL);
50
51 /* Set up the GPIO interrupts */
52 at91_gpio_irq_setup(BGA_GPIO_BANKS);
53}
54
55/*
56 * Serial port configuration.
57 * 0 .. 3 = USART0 .. USART3
58 * 4 = DBGU
59 */
60#define EK_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
61#define EK_SERIAL_CONSOLE 0 /* ttyS0 */
62
63static void __init ek_map_io(void)
64{
65 int serial[AT91_NR_UART] = EK_UART_MAP;
66 int i;
67
68 at91rm9200_map_io();
69
70 /* Initialize clocks: 18.432 MHz crystal */
71 at91_clock_init(18432000);
72
73#ifdef CONFIG_SERIAL_AT91
74 at91_console_port = EK_SERIAL_CONSOLE;
75 memcpy(at91_serial_map, serial, sizeof(serial));
76
77 /* Register UARTs */
78 for (i = 0; i < AT91_NR_UART; i++) {
79 if (serial[i] >= 0)
80 at91_register_uart(i, serial[i]);
81 }
82#endif
83}
84
85static struct at91_eth_data __initdata ek_eth_data = {
86 .phy_irq_pin = AT91_PIN_PC4,
87 .is_rmii = 1,
88};
89
90static struct at91_usbh_data __initdata ek_usbh_data = {
91 .ports = 2,
92};
93
94static struct at91_udc_data __initdata ek_udc_data = {
95 .vbus_pin = AT91_PIN_PD4,
96 .pullup_pin = AT91_PIN_PD5,
97};
98
99static struct at91_mmc_data __initdata ek_mmc_data = {
100 .det_pin = AT91_PIN_PB27,
101 .is_b = 0,
102 .wire4 = 1,
103 .wp_pin = AT91_PIN_PA17,
104};
105
106static void __init ek_board_init(void)
107{
108 /* Ethernet */
109 at91_add_device_eth(&ek_eth_data);
110 /* USB Host */
111 at91_add_device_usbh(&ek_usbh_data);
112 /* USB Device */
113 at91_add_device_udc(&ek_udc_data);
114 /* MMC */
115 at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */
116 at91_add_device_mmc(&ek_mmc_data);
117 /* VGA */
118// ek_add_device_video();
119}
120
121MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
122 /* Maintainer: SAN People/Atmel */
123 .phys_ram = AT91_SDRAM_BASE,
124 .phys_io = AT91_BASE_SYS,
125 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
126 .boot_params = AT91_SDRAM_BASE + 0x100,
127 .timer = &at91rm9200_timer,
128 .map_io = ek_map_io,
129 .init_irq = ek_init_irq,
130 .init_machine = ek_board_init,
131MACHINE_END