1 files changed, 741 insertions, 0 deletions

diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91rm9200/at91sam9261_devices.c
new file mode 100644
index 000000000000..ed1d79081b35
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/at91sam9261_devices.c
@@ -0,0 +1,741 @@
+/*
+ * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ *
+ *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *  Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512  0x00000200
+#define SZ_256  0x00000100
+#define SZ_16   0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_UHP_BASE,
+                .end    = AT91SAM9261_UHP_BASE + SZ_1M - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_UHP,
+                .end    = AT91SAM9261_ID_UHP,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9261_usbh_device = {
+        .name           = "at91_ohci",
+        .id             = -1,
+        .dev            = {
+                                .dma_mask               = &ohci_dmamask,
+                                .coherent_dma_mask      = 0xffffffff,
+                                .platform_data          = &usbh_data,
+        },
+        .resource       = usbh_resources,
+        .num_resources  = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+        if (!data)
+                return;
+
+        usbh_data = *data;
+        platform_device_register(&at91sam9261_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_UDP,
+                .end    = AT91SAM9261_BASE_UDP + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_UDP,
+                .end    = AT91SAM9261_ID_UDP,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9261_udc_device = {
+        .name           = "at91_udc",
+        .id             = -1,
+        .dev            = {
+                                .platform_data          = &udc_data,
+        },
+        .resource       = udc_resources,
+        .num_resources  = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+        unsigned long x;
+
+        if (!data)
+                return;
+
+        if (data->vbus_pin) {
+                at91_set_gpio_input(data->vbus_pin, 0);
+                at91_set_deglitch(data->vbus_pin, 1);
+        }
+
+        /* Pullup pin is handled internally */
+        x = at91_sys_read(AT91_MATRIX_USBPUCR);
+        at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+
+        udc_data = *data;
+        platform_device_register(&at91sam9261_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_MCI,
+                .end    = AT91SAM9261_BASE_MCI + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_MCI,
+                .end    = AT91SAM9261_ID_MCI,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9261_mmc_device = {
+        .name           = "at91_mci",
+        .id             = -1,
+        .dev            = {
+                                .dma_mask               = &mmc_dmamask,
+                                .coherent_dma_mask      = 0xffffffff,
+                                .platform_data          = &mmc_data,
+        },
+        .resource       = mmc_resources,
+        .num_resources  = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+        if (!data)
+                return;
+
+        /* input/irq */
+        if (data->det_pin) {
+                at91_set_gpio_input(data->det_pin, 1);
+                at91_set_deglitch(data->det_pin, 1);
+        }
+        if (data->wp_pin)
+                at91_set_gpio_input(data->wp_pin, 1);
+        if (data->vcc_pin)
+                at91_set_gpio_output(data->vcc_pin, 0);
+
+        /* CLK */
+        at91_set_B_periph(AT91_PIN_PA2, 0);
+
+        /* CMD */
+        at91_set_B_periph(AT91_PIN_PA1, 1);
+
+        /* DAT0, maybe DAT1..DAT3 */
+        at91_set_B_periph(AT91_PIN_PA0, 1);
+        if (data->wire4) {
+                at91_set_B_periph(AT91_PIN_PA4, 1);
+                at91_set_B_periph(AT91_PIN_PA5, 1);
+                at91_set_B_periph(AT91_PIN_PA6, 1);
+        }
+
+        mmc_data = *data;
+        platform_device_register(&at91sam9261_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE       AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+        {
+                .start  = NAND_BASE,
+                .end    = NAND_BASE + SZ_256M - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device at91_nand_device = {
+        .name           = "at91_nand",
+        .id             = -1,
+        .dev            = {
+                                .platform_data  = &nand_data,
+        },
+        .resource       = nand_resources,
+        .num_resources  = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+        unsigned long csa, mode;
+
+        if (!data)
+                return;
+
+        csa = at91_sys_read(AT91_MATRIX_EBICSA);
+        at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+        /* set the bus interface characteristics */
+        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+                        | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+                        | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+        if (data->bus_width_16)
+                mode = AT91_SMC_DBW_16;
+        else
+                mode = AT91_SMC_DBW_8;
+        at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+        /* enable pin */
+        if (data->enable_pin)
+                at91_set_gpio_output(data->enable_pin, 1);
+
+        /* ready/busy pin */
+        if (data->rdy_pin)
+                at91_set_gpio_input(data->rdy_pin, 1);
+
+        /* card detect pin */
+        if (data->det_pin)
+                at91_set_gpio_input(data->det_pin, 1);
+
+        at91_set_A_periph(AT91_PIN_PC0, 0);             /* NANDOE */
+        at91_set_A_periph(AT91_PIN_PC1, 0);             /* NANDWE */
+
+        nand_data = *data;
+        platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_TWI,
+                .end    = AT91SAM9261_BASE_TWI + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_TWI,
+                .end    = AT91SAM9261_ID_TWI,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9261_twi_device = {
+        .name           = "at91_i2c",
+        .id             = -1,
+        .resource       = twi_resources,
+        .num_resources  = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+        /* pins used for TWI interface */
+        at91_set_A_periph(AT91_PIN_PA7, 0);             /* TWD */
+        at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+        at91_set_A_periph(AT91_PIN_PA8, 0);             /* TWCK */
+        at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+        platform_device_register(&at91sam9261_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_SPI0,
+                .end    = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_SPI0,
+                .end    = AT91SAM9261_ID_SPI0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9261_spi0_device = {
+        .name           = "atmel_spi",
+        .id             = 0,
+        .dev            = {
+                                .dma_mask               = &spi_dmamask,
+                                .coherent_dma_mask      = 0xffffffff,
+        },
+        .resource       = spi0_resources,
+        .num_resources  = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_SPI1,
+                .end    = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_SPI1,
+                .end    = AT91SAM9261_ID_SPI1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device at91sam9261_spi1_device = {
+        .name           = "atmel_spi",
+        .id             = 1,
+        .dev            = {
+                                .dma_mask               = &spi_dmamask,
+                                .coherent_dma_mask      = 0xffffffff,
+        },
+        .resource       = spi1_resources,
+        .num_resources  = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+        int i;
+        unsigned long cs_pin;
+        short enable_spi0 = 0;
+        short enable_spi1 = 0;
+
+        /* Choose SPI chip-selects */
+        for (i = 0; i < nr_devices; i++) {
+                if (devices[i].controller_data)
+                        cs_pin = (unsigned long) devices[i].controller_data;
+                else if (devices[i].bus_num == 0)
+                        cs_pin = spi0_standard_cs[devices[i].chip_select];
+                else
+                        cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+                if (devices[i].bus_num == 0)
+                        enable_spi0 = 1;
+                else
+                        enable_spi1 = 1;
+
+                /* enable chip-select pin */
+                at91_set_gpio_output(cs_pin, 1);
+
+                /* pass chip-select pin to driver */
+                devices[i].controller_data = (void *) cs_pin;
+        }
+
+        spi_register_board_info(devices, nr_devices);
+
+        /* Configure SPI bus(es) */
+        if (enable_spi0) {
+                at91_set_A_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
+                at91_set_A_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
+                at91_set_A_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */
+
+                at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
+                platform_device_register(&at91sam9261_spi0_device);
+        }
+        if (enable_spi1) {
+                at91_set_A_periph(AT91_PIN_PB30, 0);    /* SPI1_MISO */
+                at91_set_A_periph(AT91_PIN_PB31, 0);    /* SPI1_MOSI */
+                at91_set_A_periph(AT91_PIN_PB29, 0);    /* SPI1_SPCK */
+
+                at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
+                platform_device_register(&at91sam9261_spi1_device);
+        }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct at91fb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_LCDC_BASE,
+                .end    = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_LCDC,
+                .end    = AT91SAM9261_ID_LCDC,
+                .flags  = IORESOURCE_IRQ,
+        },
+#if defined(CONFIG_FB_INTSRAM)
+        [2] = {
+                .start  = AT91SAM9261_SRAM_BASE,
+                .end    = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+        .name           = "at91-fb",
+        .id             = 0,
+        .dev            = {
+                                .dma_mask               = &lcdc_dmamask,
+                                .coherent_dma_mask      = 0xffffffff,
+                                .platform_data          = &lcdc_data,
+        },
+        .resource       = lcdc_resources,
+        .num_resources  = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct at91fb_info *data)
+{
+        if (!data) {
+                return;
+        }
+
+        at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
+        at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
+        at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
+        at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
+        at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
+        at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
+        at91_set_A_periph(AT91_PIN_PB9, 0);     /* LCDD4 */
+        at91_set_A_periph(AT91_PIN_PB10, 0);    /* LCDD5 */
+        at91_set_A_periph(AT91_PIN_PB11, 0);    /* LCDD6 */
+        at91_set_A_periph(AT91_PIN_PB12, 0);    /* LCDD7 */
+        at91_set_A_periph(AT91_PIN_PB15, 0);    /* LCDD10 */
+        at91_set_A_periph(AT91_PIN_PB16, 0);    /* LCDD11 */
+        at91_set_A_periph(AT91_PIN_PB17, 0);    /* LCDD12 */
+        at91_set_A_periph(AT91_PIN_PB18, 0);    /* LCDD13 */
+        at91_set_A_periph(AT91_PIN_PB19, 0);    /* LCDD14 */
+        at91_set_A_periph(AT91_PIN_PB20, 0);    /* LCDD15 */
+        at91_set_B_periph(AT91_PIN_PB23, 0);    /* LCDD18 */
+        at91_set_B_periph(AT91_PIN_PB24, 0);    /* LCDD19 */
+        at91_set_B_periph(AT91_PIN_PB25, 0);    /* LCDD20 */
+        at91_set_B_periph(AT91_PIN_PB26, 0);    /* LCDD21 */
+        at91_set_B_periph(AT91_PIN_PB27, 0);    /* LCDD22 */
+        at91_set_B_periph(AT91_PIN_PB28, 0);    /* LCDD23 */
+
+        lcdc_data = *data;
+        platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+        at91_leds_cpu   = cpu_led;
+        at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+        [0] = {
+                .start  = AT91_VA_BASE_SYS + AT91_DBGU,
+                .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91_ID_SYS,
+                .end    = AT91_ID_SYS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct atmel_uart_data dbgu_data = {
+        .use_dma_tx     = 0,
+        .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
+        .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9261_dbgu_device = {
+        .name           = "atmel_usart",
+        .id             = 0,
+        .dev            = {
+                                .platform_data  = &dbgu_data,
+                                .coherent_dma_mask = 0xffffffff,
+        },
+        .resource       = dbgu_resources,
+        .num_resources  = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+        at91_set_A_periph(AT91_PIN_PA9, 0);             /* DRXD */
+        at91_set_A_periph(AT91_PIN_PA10, 1);            /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_US0,
+                .end    = AT91SAM9261_BASE_US0 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_US0,
+                .end    = AT91SAM9261_ID_US0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct atmel_uart_data uart0_data = {
+        .use_dma_tx     = 1,
+        .use_dma_rx     = 1,
+};
+
+static struct platform_device at91sam9261_uart0_device = {
+        .name           = "atmel_usart",
+        .id             = 1,
+        .dev            = {
+                                .platform_data  = &uart0_data,
+                                .coherent_dma_mask = 0xffffffff,
+        },
+        .resource       = uart0_resources,
+        .num_resources  = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+        at91_set_A_periph(AT91_PIN_PC8, 1);             /* TXD0 */
+        at91_set_A_periph(AT91_PIN_PC9, 0);             /* RXD0 */
+        at91_set_A_periph(AT91_PIN_PC10, 0);            /* RTS0 */
+        at91_set_A_periph(AT91_PIN_PC11, 0);            /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_US1,
+                .end    = AT91SAM9261_BASE_US1 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_US1,
+                .end    = AT91SAM9261_ID_US1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct atmel_uart_data uart1_data = {
+        .use_dma_tx     = 1,
+        .use_dma_rx     = 1,
+};
+
+static struct platform_device at91sam9261_uart1_device = {
+        .name           = "atmel_usart",
+        .id             = 2,
+        .dev            = {
+                                .platform_data  = &uart1_data,
+                                .coherent_dma_mask = 0xffffffff,
+        },
+        .resource       = uart1_resources,
+        .num_resources  = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+        at91_set_A_periph(AT91_PIN_PC12, 1);            /* TXD1 */
+        at91_set_A_periph(AT91_PIN_PC13, 0);            /* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+        [0] = {
+                .start  = AT91SAM9261_BASE_US2,
+                .end    = AT91SAM9261_BASE_US2 + SZ_16K - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91SAM9261_ID_US2,
+                .end    = AT91SAM9261_ID_US2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct atmel_uart_data uart2_data = {
+        .use_dma_tx     = 1,
+        .use_dma_rx     = 1,
+};
+
+static struct platform_device at91sam9261_uart2_device = {
+        .name           = "atmel_usart",
+        .id             = 3,
+        .dev            = {
+                                .platform_data  = &uart2_data,
+                                .coherent_dma_mask = 0xffffffff,
+        },
+        .resource       = uart2_resources,
+        .num_resources  = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+        at91_set_A_periph(AT91_PIN_PC15, 0);            /* RXD2 */
+        at91_set_A_periph(AT91_PIN_PC14, 1);            /* TXD2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];     /* the UARTs to use */
+struct platform_device *atmel_default_console_device;   /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+        int i;
+
+        /* Fill in list of supported UARTs */
+        for (i = 0; i < config->nr_tty; i++) {
+                switch (config->tty_map[i]) {
+                        case 0:
+                                configure_usart0_pins();
+                                at91_uarts[i] = &at91sam9261_uart0_device;
+                                at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
+                                break;
+                        case 1:
+                                configure_usart1_pins();
+                                at91_uarts[i] = &at91sam9261_uart1_device;
+                                at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
+                                break;
+                        case 2:
+                                configure_usart2_pins();
+                                at91_uarts[i] = &at91sam9261_uart2_device;
+                                at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
+                                break;
+                        case 3:
+                                configure_dbgu_pins();
+                                at91_uarts[i] = &at91sam9261_dbgu_device;
+                                at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
+                                break;
+                        default:
+                                continue;
+                }
+                at91_uarts[i]->id = i;          /* update ID number to mapped ID */
+        }
+
+        /* Set serial console device */
+        if (config->console_tty < ATMEL_MAX_UART)
+                atmel_default_console_device = at91_uarts[config->console_tty];
+        if (!atmel_default_console_device)
+                printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+        int i;
+
+        for (i = 0; i < ATMEL_MAX_UART; i++) {
+                if (at91_uarts[i])
+                        platform_device_register(at91_uarts[i]);
+        }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+        return 0;
+}
+
+arch_initcall(at91_add_standard_devices);