aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/Kconfig3
-rw-r--r--arch/arm/mach-at91/Makefile1
-rw-r--r--arch/arm/mach-at91/Makefile.boot7
-rw-r--r--arch/arm/mach-at91/at91cap9.c365
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c1066
-rw-r--r--arch/arm/mach-at91/clock.c2
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/pm.c5
8 files changed, 1450 insertions, 1 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 214733e897e5..d12c616407d6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,6 +22,9 @@ config ARCH_AT91SAM9263
22config ARCH_AT91SAM9RL 22config ARCH_AT91SAM9RL
23 bool "AT91SAM9RL" 23 bool "AT91SAM9RL"
24 24
25config ARCH_AT91CAP9
26 bool "AT91CAP9"
27
25config ARCH_AT91X40 28config ARCH_AT91X40
26 bool "AT91x40" 29 bool "AT91x40"
27 30
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 529ffb5f3f13..10413c5d3f8a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d
15obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o 15obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
16obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o 16obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
17obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o 17obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
18obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
18obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o 19obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
19 20
20# AT91RM9200 board-specific support 21# AT91RM9200 board-specific support
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc7cd34..071a2506a69f 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,7 +3,12 @@
3# PARAMS_PHYS must be within 4MB of ZRELADDR 3# PARAMS_PHYS must be within 4MB of ZRELADDR
4# INITRD_PHYS must be in RAM 4# INITRD_PHYS must be in RAM
5 5
6ifeq ($(CONFIG_ARCH_AT91CAP9),y)
7 zreladdr-y := 0x70008000
8params_phys-y := 0x70000100
9initrd_phys-y := 0x70410000
10else
6 zreladdr-y := 0x20008000 11 zreladdr-y := 0x20008000
7params_phys-y := 0x20000100 12params_phys-y := 0x20000100
8initrd_phys-y := 0x20410000 13initrd_phys-y := 0x20410000
9 14endif
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
new file mode 100644
index 000000000000..48d27d8000b0
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -0,0 +1,365 @@
1/*
2 * arch/arm/mach-at91/at91cap9.c
3 *
4 * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
5 * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
6 * Copyright (C) 2007 Atmel Corporation.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 */
14
15#include <linux/module.h>
16
17#include <asm/mach/arch.h>
18#include <asm/mach/map.h>
19#include <asm/arch/at91cap9.h>
20#include <asm/arch/at91_pmc.h>
21#include <asm/arch/at91_rstc.h>
22
23#include "generic.h"
24#include "clock.h"
25
26static struct map_desc at91cap9_io_desc[] __initdata = {
27 {
28 .virtual = AT91_VA_BASE_SYS,
29 .pfn = __phys_to_pfn(AT91_BASE_SYS),
30 .length = SZ_16K,
31 .type = MT_DEVICE,
32 }, {
33 .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
34 .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
35 .length = AT91CAP9_SRAM_SIZE,
36 .type = MT_DEVICE,
37 },
38};
39
40/* --------------------------------------------------------------------
41 * Clocks
42 * -------------------------------------------------------------------- */
43
44/*
45 * The peripheral clocks.
46 */
47static struct clk pioABCD_clk = {
48 .name = "pioABCD_clk",
49 .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
50 .type = CLK_TYPE_PERIPHERAL,
51};
52static struct clk mpb0_clk = {
53 .name = "mpb0_clk",
54 .pmc_mask = 1 << AT91CAP9_ID_MPB0,
55 .type = CLK_TYPE_PERIPHERAL,
56};
57static struct clk mpb1_clk = {
58 .name = "mpb1_clk",
59 .pmc_mask = 1 << AT91CAP9_ID_MPB1,
60 .type = CLK_TYPE_PERIPHERAL,
61};
62static struct clk mpb2_clk = {
63 .name = "mpb2_clk",
64 .pmc_mask = 1 << AT91CAP9_ID_MPB2,
65 .type = CLK_TYPE_PERIPHERAL,
66};
67static struct clk mpb3_clk = {
68 .name = "mpb3_clk",
69 .pmc_mask = 1 << AT91CAP9_ID_MPB3,
70 .type = CLK_TYPE_PERIPHERAL,
71};
72static struct clk mpb4_clk = {
73 .name = "mpb4_clk",
74 .pmc_mask = 1 << AT91CAP9_ID_MPB4,
75 .type = CLK_TYPE_PERIPHERAL,
76};
77static struct clk usart0_clk = {
78 .name = "usart0_clk",
79 .pmc_mask = 1 << AT91CAP9_ID_US0,
80 .type = CLK_TYPE_PERIPHERAL,
81};
82static struct clk usart1_clk = {
83 .name = "usart1_clk",
84 .pmc_mask = 1 << AT91CAP9_ID_US1,
85 .type = CLK_TYPE_PERIPHERAL,
86};
87static struct clk usart2_clk = {
88 .name = "usart2_clk",
89 .pmc_mask = 1 << AT91CAP9_ID_US2,
90 .type = CLK_TYPE_PERIPHERAL,
91};
92static struct clk mmc0_clk = {
93 .name = "mci0_clk",
94 .pmc_mask = 1 << AT91CAP9_ID_MCI0,
95 .type = CLK_TYPE_PERIPHERAL,
96};
97static struct clk mmc1_clk = {
98 .name = "mci1_clk",
99 .pmc_mask = 1 << AT91CAP9_ID_MCI1,
100 .type = CLK_TYPE_PERIPHERAL,
101};
102static struct clk can_clk = {
103 .name = "can_clk",
104 .pmc_mask = 1 << AT91CAP9_ID_CAN,
105 .type = CLK_TYPE_PERIPHERAL,
106};
107static struct clk twi_clk = {
108 .name = "twi_clk",
109 .pmc_mask = 1 << AT91CAP9_ID_TWI,
110 .type = CLK_TYPE_PERIPHERAL,
111};
112static struct clk spi0_clk = {
113 .name = "spi0_clk",
114 .pmc_mask = 1 << AT91CAP9_ID_SPI0,
115 .type = CLK_TYPE_PERIPHERAL,
116};
117static struct clk spi1_clk = {
118 .name = "spi1_clk",
119 .pmc_mask = 1 << AT91CAP9_ID_SPI1,
120 .type = CLK_TYPE_PERIPHERAL,
121};
122static struct clk ssc0_clk = {
123 .name = "ssc0_clk",
124 .pmc_mask = 1 << AT91CAP9_ID_SSC0,
125 .type = CLK_TYPE_PERIPHERAL,
126};
127static struct clk ssc1_clk = {
128 .name = "ssc1_clk",
129 .pmc_mask = 1 << AT91CAP9_ID_SSC1,
130 .type = CLK_TYPE_PERIPHERAL,
131};
132static struct clk ac97_clk = {
133 .name = "ac97_clk",
134 .pmc_mask = 1 << AT91CAP9_ID_AC97C,
135 .type = CLK_TYPE_PERIPHERAL,
136};
137static struct clk tcb_clk = {
138 .name = "tcb_clk",
139 .pmc_mask = 1 << AT91CAP9_ID_TCB,
140 .type = CLK_TYPE_PERIPHERAL,
141};
142static struct clk pwmc_clk = {
143 .name = "pwmc_clk",
144 .pmc_mask = 1 << AT91CAP9_ID_PWMC,
145 .type = CLK_TYPE_PERIPHERAL,
146};
147static struct clk macb_clk = {
148 .name = "macb_clk",
149 .pmc_mask = 1 << AT91CAP9_ID_EMAC,
150 .type = CLK_TYPE_PERIPHERAL,
151};
152static struct clk aestdes_clk = {
153 .name = "aestdes_clk",
154 .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
155 .type = CLK_TYPE_PERIPHERAL,
156};
157static struct clk adc_clk = {
158 .name = "adc_clk",
159 .pmc_mask = 1 << AT91CAP9_ID_ADC,
160 .type = CLK_TYPE_PERIPHERAL,
161};
162static struct clk isi_clk = {
163 .name = "isi_clk",
164 .pmc_mask = 1 << AT91CAP9_ID_ISI,
165 .type = CLK_TYPE_PERIPHERAL,
166};
167static struct clk lcdc_clk = {
168 .name = "lcdc_clk",
169 .pmc_mask = 1 << AT91CAP9_ID_LCDC,
170 .type = CLK_TYPE_PERIPHERAL,
171};
172static struct clk dma_clk = {
173 .name = "dma_clk",
174 .pmc_mask = 1 << AT91CAP9_ID_DMA,
175 .type = CLK_TYPE_PERIPHERAL,
176};
177static struct clk udphs_clk = {
178 .name = "udphs_clk",
179 .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
180 .type = CLK_TYPE_PERIPHERAL,
181};
182static struct clk ohci_clk = {
183 .name = "ohci_clk",
184 .pmc_mask = 1 << AT91CAP9_ID_UHP,
185 .type = CLK_TYPE_PERIPHERAL,
186};
187
188static struct clk *periph_clocks[] __initdata = {
189 &pioABCD_clk,
190 &mpb0_clk,
191 &mpb1_clk,
192 &mpb2_clk,
193 &mpb3_clk,
194 &mpb4_clk,
195 &usart0_clk,
196 &usart1_clk,
197 &usart2_clk,
198 &mmc0_clk,
199 &mmc1_clk,
200 &can_clk,
201 &twi_clk,
202 &spi0_clk,
203 &spi1_clk,
204 &ssc0_clk,
205 &ssc1_clk,
206 &ac97_clk,
207 &tcb_clk,
208 &pwmc_clk,
209 &macb_clk,
210 &aestdes_clk,
211 &adc_clk,
212 &isi_clk,
213 &lcdc_clk,
214 &dma_clk,
215 &udphs_clk,
216 &ohci_clk,
217 // irq0 .. irq1
218};
219
220/*
221 * The four programmable clocks.
222 * You must configure pin multiplexing to bring these signals out.
223 */
224static struct clk pck0 = {
225 .name = "pck0",
226 .pmc_mask = AT91_PMC_PCK0,
227 .type = CLK_TYPE_PROGRAMMABLE,
228 .id = 0,
229};
230static struct clk pck1 = {
231 .name = "pck1",
232 .pmc_mask = AT91_PMC_PCK1,
233 .type = CLK_TYPE_PROGRAMMABLE,
234 .id = 1,
235};
236static struct clk pck2 = {
237 .name = "pck2",
238 .pmc_mask = AT91_PMC_PCK2,
239 .type = CLK_TYPE_PROGRAMMABLE,
240 .id = 2,
241};
242static struct clk pck3 = {
243 .name = "pck3",
244 .pmc_mask = AT91_PMC_PCK3,
245 .type = CLK_TYPE_PROGRAMMABLE,
246 .id = 3,
247};
248
249static void __init at91cap9_register_clocks(void)
250{
251 int i;
252
253 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
254 clk_register(periph_clocks[i]);
255
256 clk_register(&pck0);
257 clk_register(&pck1);
258 clk_register(&pck2);
259 clk_register(&pck3);
260}
261
262/* --------------------------------------------------------------------
263 * GPIO
264 * -------------------------------------------------------------------- */
265
266static struct at91_gpio_bank at91cap9_gpio[] = {
267 {
268 .id = AT91CAP9_ID_PIOABCD,
269 .offset = AT91_PIOA,
270 .clock = &pioABCD_clk,
271 }, {
272 .id = AT91CAP9_ID_PIOABCD,
273 .offset = AT91_PIOB,
274 .clock = &pioABCD_clk,
275 }, {
276 .id = AT91CAP9_ID_PIOABCD,
277 .offset = AT91_PIOC,
278 .clock = &pioABCD_clk,
279 }, {
280 .id = AT91CAP9_ID_PIOABCD,
281 .offset = AT91_PIOD,
282 .clock = &pioABCD_clk,
283 }
284};
285
286static void at91cap9_reset(void)
287{
288 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
289}
290
291/* --------------------------------------------------------------------
292 * AT91CAP9 processor initialization
293 * -------------------------------------------------------------------- */
294
295void __init at91cap9_initialize(unsigned long main_clock)
296{
297 /* Map peripherals */
298 iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
299
300 at91_arch_reset = at91cap9_reset;
301 at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
302
303 /* Init clock subsystem */
304 at91_clock_init(main_clock);
305
306 /* Register the processor-specific clocks */
307 at91cap9_register_clocks();
308
309 /* Register GPIO subsystem */
310 at91_gpio_init(at91cap9_gpio, 4);
311}
312
313/* --------------------------------------------------------------------
314 * Interrupt initialization
315 * -------------------------------------------------------------------- */
316
317/*
318 * The default interrupt priority levels (0 = lowest, 7 = highest).
319 */
320static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
321 7, /* Advanced Interrupt Controller (FIQ) */
322 7, /* System Peripherals */
323 1, /* Parallel IO Controller A, B, C and D */
324 0, /* MP Block Peripheral 0 */
325 0, /* MP Block Peripheral 1 */
326 0, /* MP Block Peripheral 2 */
327 0, /* MP Block Peripheral 3 */
328 0, /* MP Block Peripheral 4 */
329 5, /* USART 0 */
330 5, /* USART 1 */
331 5, /* USART 2 */
332 0, /* Multimedia Card Interface 0 */
333 0, /* Multimedia Card Interface 1 */
334 3, /* CAN */
335 6, /* Two-Wire Interface */
336 5, /* Serial Peripheral Interface 0 */
337 5, /* Serial Peripheral Interface 1 */
338 4, /* Serial Synchronous Controller 0 */
339 4, /* Serial Synchronous Controller 1 */
340 5, /* AC97 Controller */
341 0, /* Timer Counter 0, 1 and 2 */
342 0, /* Pulse Width Modulation Controller */
343 3, /* Ethernet */
344 0, /* Advanced Encryption Standard, Triple DES*/
345 0, /* Analog-to-Digital Converter */
346 0, /* Image Sensor Interface */
347 3, /* LCD Controller */
348 0, /* DMA Controller */
349 2, /* USB Device Port */
350 2, /* USB Host port */
351 0, /* Advanced Interrupt Controller (IRQ0) */
352 0, /* Advanced Interrupt Controller (IRQ1) */
353};
354
355void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
356{
357 if (!priority)
358 priority = at91cap9_default_irq_priority;
359
360 /* Initialize the AIC interrupt controller */
361 at91_aic_init(priority);
362
363 /* Enable GPIO interrupts */
364 at91_gpio_irq_setup();
365}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
new file mode 100644
index 000000000000..c50fad9cd143
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -0,0 +1,1066 @@
1/*
2 * arch/arm/mach-at91/at91cap9_devices.c
3 *
4 * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
5 * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
6 * Copyright (C) 2007 Atmel Corporation.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 */
14#include <asm/mach/arch.h>
15#include <asm/mach/map.h>
16
17#include <linux/dma-mapping.h>
18#include <linux/platform_device.h>
19#include <linux/mtd/physmap.h>
20
21#include <video/atmel_lcdc.h>
22
23#include <asm/arch/board.h>
24#include <asm/arch/gpio.h>
25#include <asm/arch/at91cap9.h>
26#include <asm/arch/at91sam926x_mc.h>
27#include <asm/arch/at91cap9_matrix.h>
28
29#include "generic.h"
30
31
32/* --------------------------------------------------------------------
33 * USB Host
34 * -------------------------------------------------------------------- */
35
36#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
37static u64 ohci_dmamask = DMA_BIT_MASK(32);
38static struct at91_usbh_data usbh_data;
39
40static struct resource usbh_resources[] = {
41 [0] = {
42 .start = AT91CAP9_UHP_BASE,
43 .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
44 .flags = IORESOURCE_MEM,
45 },
46 [1] = {
47 .start = AT91CAP9_ID_UHP,
48 .end = AT91CAP9_ID_UHP,
49 .flags = IORESOURCE_IRQ,
50 },
51};
52
53static struct platform_device at91_usbh_device = {
54 .name = "at91_ohci",
55 .id = -1,
56 .dev = {
57 .dma_mask = &ohci_dmamask,
58 .coherent_dma_mask = DMA_BIT_MASK(32),
59 .platform_data = &usbh_data,
60 },
61 .resource = usbh_resources,
62 .num_resources = ARRAY_SIZE(usbh_resources),
63};
64
65void __init at91_add_device_usbh(struct at91_usbh_data *data)
66{
67 int i;
68
69 if (!data)
70 return;
71
72 /* Enable VBus control for UHP ports */
73 for (i = 0; i < data->ports; i++) {
74 if (data->vbus_pin[i])
75 at91_set_gpio_output(data->vbus_pin[i], 0);
76 }
77
78 usbh_data = *data;
79 platform_device_register(&at91_usbh_device);
80}
81#else
82void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
83#endif
84
85
86/* --------------------------------------------------------------------
87 * Ethernet
88 * -------------------------------------------------------------------- */
89
90#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
91static u64 eth_dmamask = DMA_BIT_MASK(32);
92static struct at91_eth_data eth_data;
93
94static struct resource eth_resources[] = {
95 [0] = {
96 .start = AT91CAP9_BASE_EMAC,
97 .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
98 .flags = IORESOURCE_MEM,
99 },
100 [1] = {
101 .start = AT91CAP9_ID_EMAC,
102 .end = AT91CAP9_ID_EMAC,
103 .flags = IORESOURCE_IRQ,
104 },
105};
106
107static struct platform_device at91cap9_eth_device = {
108 .name = "macb",
109 .id = -1,
110 .dev = {
111 .dma_mask = &eth_dmamask,
112 .coherent_dma_mask = DMA_BIT_MASK(32),
113 .platform_data = &eth_data,
114 },
115 .resource = eth_resources,
116 .num_resources = ARRAY_SIZE(eth_resources),
117};
118
119void __init at91_add_device_eth(struct at91_eth_data *data)
120{
121 if (!data)
122 return;
123
124 if (data->phy_irq_pin) {
125 at91_set_gpio_input(data->phy_irq_pin, 0);
126 at91_set_deglitch(data->phy_irq_pin, 1);
127 }
128
129 /* Pins used for MII and RMII */
130 at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
131 at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
132 at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
133 at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
134 at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
135 at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
136 at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
137 at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
138 at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
139 at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
140
141 if (!data->is_rmii) {
142 at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
143 at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
144 at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
145 at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
146 at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
147 at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
148 at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
149 at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
150 }
151
152 eth_data = *data;
153 platform_device_register(&at91cap9_eth_device);
154}
155#else
156void __init at91_add_device_eth(struct at91_eth_data *data) {}
157#endif
158
159
160/* --------------------------------------------------------------------
161 * MMC / SD
162 * -------------------------------------------------------------------- */
163
164#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
165static u64 mmc_dmamask = DMA_BIT_MASK(32);
166static struct at91_mmc_data mmc0_data, mmc1_data;
167
168static struct resource mmc0_resources[] = {
169 [0] = {
170 .start = AT91CAP9_BASE_MCI0,
171 .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
172 .flags = IORESOURCE_MEM,
173 },
174 [1] = {
175 .start = AT91CAP9_ID_MCI0,
176 .end = AT91CAP9_ID_MCI0,
177 .flags = IORESOURCE_IRQ,
178 },
179};
180
181static struct platform_device at91cap9_mmc0_device = {
182 .name = "at91_mci",
183 .id = 0,
184 .dev = {
185 .dma_mask = &mmc_dmamask,
186 .coherent_dma_mask = DMA_BIT_MASK(32),
187 .platform_data = &mmc0_data,
188 },
189 .resource = mmc0_resources,
190 .num_resources = ARRAY_SIZE(mmc0_resources),
191};
192
193static struct resource mmc1_resources[] = {
194 [0] = {
195 .start = AT91CAP9_BASE_MCI1,
196 .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
197 .flags = IORESOURCE_MEM,
198 },
199 [1] = {
200 .start = AT91CAP9_ID_MCI1,
201 .end = AT91CAP9_ID_MCI1,
202 .flags = IORESOURCE_IRQ,
203 },
204};
205
206static struct platform_device at91cap9_mmc1_device = {
207 .name = "at91_mci",
208 .id = 1,
209 .dev = {
210 .dma_mask = &mmc_dmamask,
211 .coherent_dma_mask = DMA_BIT_MASK(32),
212 .platform_data = &mmc1_data,
213 },
214 .resource = mmc1_resources,
215 .num_resources = ARRAY_SIZE(mmc1_resources),
216};
217
218void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
219{
220 if (!data)
221 return;
222
223 /* input/irq */
224 if (data->det_pin) {
225 at91_set_gpio_input(data->det_pin, 1);
226 at91_set_deglitch(data->det_pin, 1);
227 }
228 if (data->wp_pin)
229 at91_set_gpio_input(data->wp_pin, 1);
230 if (data->vcc_pin)
231 at91_set_gpio_output(data->vcc_pin, 0);
232
233 if (mmc_id == 0) { /* MCI0 */
234 /* CLK */
235 at91_set_A_periph(AT91_PIN_PA2, 0);
236
237 /* CMD */
238 at91_set_A_periph(AT91_PIN_PA1, 1);
239
240 /* DAT0, maybe DAT1..DAT3 */
241 at91_set_A_periph(AT91_PIN_PA0, 1);
242 if (data->wire4) {
243 at91_set_A_periph(AT91_PIN_PA3, 1);
244 at91_set_A_periph(AT91_PIN_PA4, 1);
245 at91_set_A_periph(AT91_PIN_PA5, 1);
246 }
247
248 mmc0_data = *data;
249 at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
250 platform_device_register(&at91cap9_mmc0_device);
251 } else { /* MCI1 */
252 /* CLK */
253 at91_set_A_periph(AT91_PIN_PA16, 0);
254
255 /* CMD */
256 at91_set_A_periph(AT91_PIN_PA17, 1);
257
258 /* DAT0, maybe DAT1..DAT3 */
259 at91_set_A_periph(AT91_PIN_PA18, 1);
260 if (data->wire4) {
261 at91_set_A_periph(AT91_PIN_PA19, 1);
262 at91_set_A_periph(AT91_PIN_PA20, 1);
263 at91_set_A_periph(AT91_PIN_PA21, 1);
264 }
265
266 mmc1_data = *data;
267 at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
268 platform_device_register(&at91cap9_mmc1_device);
269 }
270}
271#else
272void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
273#endif
274
275
276/* --------------------------------------------------------------------
277 * NAND / SmartMedia
278 * -------------------------------------------------------------------- */
279
280#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
281static struct at91_nand_data nand_data;
282
283#define NAND_BASE AT91_CHIPSELECT_3
284
285static struct resource nand_resources[] = {
286 {
287 .start = NAND_BASE,
288 .end = NAND_BASE + SZ_256M - 1,
289 .flags = IORESOURCE_MEM,
290 }
291};
292
293static struct platform_device at91cap9_nand_device = {
294 .name = "at91_nand",
295 .id = -1,
296 .dev = {
297 .platform_data = &nand_data,
298 },
299 .resource = nand_resources,
300 .num_resources = ARRAY_SIZE(nand_resources),
301};
302
303void __init at91_add_device_nand(struct at91_nand_data *data)
304{
305 unsigned long csa, mode;
306
307 if (!data)
308 return;
309
310 csa = at91_sys_read(AT91_MATRIX_EBICSA);
311 at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
312
313 /* set the bus interface characteristics */
314 at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
315 | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
316
317 at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
318 | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
319
320 at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
321
322 if (data->bus_width_16)
323 mode = AT91_SMC_DBW_16;
324 else
325 mode = AT91_SMC_DBW_8;
326 at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
327
328 /* enable pin */
329 if (data->enable_pin)
330 at91_set_gpio_output(data->enable_pin, 1);
331
332 /* ready/busy pin */
333 if (data->rdy_pin)
334 at91_set_gpio_input(data->rdy_pin, 1);
335
336 /* card detect pin */
337 if (data->det_pin)
338 at91_set_gpio_input(data->det_pin, 1);
339
340 nand_data = *data;
341 platform_device_register(&at91cap9_nand_device);
342}
343#else
344void __init at91_add_device_nand(struct at91_nand_data *data) {}
345#endif
346
347/* --------------------------------------------------------------------
348 * TWI (i2c)
349 * -------------------------------------------------------------------- */
350
351/*
352 * Prefer the GPIO code since the TWI controller isn't robust
353 * (gets overruns and underruns under load) and can only issue
354 * repeated STARTs in one scenario (the driver doesn't yet handle them).
355 */
356#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
357
358static struct i2c_gpio_platform_data pdata = {
359 .sda_pin = AT91_PIN_PB4,
360 .sda_is_open_drain = 1,
361 .scl_pin = AT91_PIN_PB5,
362 .scl_is_open_drain = 1,
363 .udelay = 2, /* ~100 kHz */
364};
365
366static struct platform_device at91cap9_twi_device = {
367 .name = "i2c-gpio",
368 .id = -1,
369 .dev.platform_data = &pdata,
370};
371
372void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
373{
374 at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
375 at91_set_multi_drive(AT91_PIN_PB4, 1);
376
377 at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
378 at91_set_multi_drive(AT91_PIN_PB5, 1);
379
380 i2c_register_board_info(0, devices, nr_devices);
381 platform_device_register(&at91cap9_twi_device);
382}
383
384#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
385
386static struct resource twi_resources[] = {
387 [0] = {
388 .start = AT91CAP9_BASE_TWI,
389 .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
390 .flags = IORESOURCE_MEM,
391 },
392 [1] = {
393 .start = AT91CAP9_ID_TWI,
394 .end = AT91CAP9_ID_TWI,
395 .flags = IORESOURCE_IRQ,
396 },
397};
398
399static struct platform_device at91cap9_twi_device = {
400 .name = "at91_i2c",
401 .id = -1,
402 .resource = twi_resources,
403 .num_resources = ARRAY_SIZE(twi_resources),
404};
405
406void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
407{
408 /* pins used for TWI interface */
409 at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
410 at91_set_multi_drive(AT91_PIN_PB4, 1);
411
412 at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
413 at91_set_multi_drive(AT91_PIN_PB5, 1);
414
415 i2c_register_board_info(0, devices, nr_devices);
416 platform_device_register(&at91cap9_twi_device);
417}
418#else
419void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
420#endif
421
422/* --------------------------------------------------------------------
423 * SPI
424 * -------------------------------------------------------------------- */
425
426#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
427static u64 spi_dmamask = DMA_BIT_MASK(32);
428
429static struct resource spi0_resources[] = {
430 [0] = {
431 .start = AT91CAP9_BASE_SPI0,
432 .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
433 .flags = IORESOURCE_MEM,
434 },
435 [1] = {
436 .start = AT91CAP9_ID_SPI0,
437 .end = AT91CAP9_ID_SPI0,
438 .flags = IORESOURCE_IRQ,
439 },
440};
441
442static struct platform_device at91cap9_spi0_device = {
443 .name = "atmel_spi",
444 .id = 0,
445 .dev = {
446 .dma_mask = &spi_dmamask,
447 .coherent_dma_mask = DMA_BIT_MASK(32),
448 },
449 .resource = spi0_resources,
450 .num_resources = ARRAY_SIZE(spi0_resources),
451};
452
453static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
454
455static struct resource spi1_resources[] = {
456 [0] = {
457 .start = AT91CAP9_BASE_SPI1,
458 .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
459 .flags = IORESOURCE_MEM,
460 },
461 [1] = {
462 .start = AT91CAP9_ID_SPI1,
463 .end = AT91CAP9_ID_SPI1,
464 .flags = IORESOURCE_IRQ,
465 },
466};
467
468static struct platform_device at91cap9_spi1_device = {
469 .name = "atmel_spi",
470 .id = 1,
471 .dev = {
472 .dma_mask = &spi_dmamask,
473 .coherent_dma_mask = DMA_BIT_MASK(32),
474 },
475 .resource = spi1_resources,
476 .num_resources = ARRAY_SIZE(spi1_resources),
477};
478
479static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
480
481void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
482{
483 int i;
484 unsigned long cs_pin;
485 short enable_spi0 = 0;
486 short enable_spi1 = 0;
487
488 /* Choose SPI chip-selects */
489 for (i = 0; i < nr_devices; i++) {
490 if (devices[i].controller_data)
491 cs_pin = (unsigned long) devices[i].controller_data;
492 else if (devices[i].bus_num == 0)
493 cs_pin = spi0_standard_cs[devices[i].chip_select];
494 else
495 cs_pin = spi1_standard_cs[devices[i].chip_select];
496
497 if (devices[i].bus_num == 0)
498 enable_spi0 = 1;
499 else
500 enable_spi1 = 1;
501
502 /* enable chip-select pin */
503 at91_set_gpio_output(cs_pin, 1);
504
505 /* pass chip-select pin to driver */
506 devices[i].controller_data = (void *) cs_pin;
507 }
508
509 spi_register_board_info(devices, nr_devices);
510
511 /* Configure SPI bus(es) */
512 if (enable_spi0) {
513 at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
514 at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
515 at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
516
517 at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
518 platform_device_register(&at91cap9_spi0_device);
519 }
520 if (enable_spi1) {
521 at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
522 at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
523 at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
524
525 at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
526 platform_device_register(&at91cap9_spi1_device);
527 }
528}
529#else
530void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
531#endif
532
533
534/* --------------------------------------------------------------------
535 * RTT
536 * -------------------------------------------------------------------- */
537
538static struct platform_device at91cap9_rtt_device = {
539 .name = "at91_rtt",
540 .id = -1,
541 .num_resources = 0,
542};
543
544static void __init at91_add_device_rtt(void)
545{
546 platform_device_register(&at91cap9_rtt_device);
547}
548
549
550/* --------------------------------------------------------------------
551 * Watchdog
552 * -------------------------------------------------------------------- */
553
554#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
555static struct platform_device at91cap9_wdt_device = {
556 .name = "at91_wdt",
557 .id = -1,
558 .num_resources = 0,
559};
560
561static void __init at91_add_device_watchdog(void)
562{
563 platform_device_register(&at91cap9_wdt_device);
564}
565#else
566static void __init at91_add_device_watchdog(void) {}
567#endif
568
569
570/* --------------------------------------------------------------------
571 * AC97
572 * -------------------------------------------------------------------- */
573
574#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
575static u64 ac97_dmamask = DMA_BIT_MASK(32);
576static struct atmel_ac97_data ac97_data;
577
578static struct resource ac97_resources[] = {
579 [0] = {
580 .start = AT91CAP9_BASE_AC97C,
581 .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
582 .flags = IORESOURCE_MEM,
583 },
584 [1] = {
585 .start = AT91CAP9_ID_AC97C,
586 .end = AT91CAP9_ID_AC97C,
587 .flags = IORESOURCE_IRQ,
588 },
589};
590
591static struct platform_device at91cap9_ac97_device = {
592 .name = "ac97c",
593 .id = 1,
594 .dev = {
595 .dma_mask = &ac97_dmamask,
596 .coherent_dma_mask = DMA_BIT_MASK(32),
597 .platform_data = &ac97_data,
598 },
599 .resource = ac97_resources,
600 .num_resources = ARRAY_SIZE(ac97_resources),
601};
602
603void __init at91_add_device_ac97(struct atmel_ac97_data *data)
604{
605 if (!data)
606 return;
607
608 at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
609 at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
610 at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
611 at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
612
613 /* reset */
614 if (data->reset_pin)
615 at91_set_gpio_output(data->reset_pin, 0);
616
617 ac97_data = *data;
618 platform_device_register(&at91cap9_ac97_device);
619}
620#else
621void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
622#endif
623
624
625/* --------------------------------------------------------------------
626 * LCD Controller
627 * -------------------------------------------------------------------- */
628
629#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
630static u64 lcdc_dmamask = DMA_BIT_MASK(32);
631static struct atmel_lcdfb_info lcdc_data;
632
633static struct resource lcdc_resources[] = {
634 [0] = {
635 .start = AT91CAP9_LCDC_BASE,
636 .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
637 .flags = IORESOURCE_MEM,
638 },
639 [1] = {
640 .start = AT91CAP9_ID_LCDC,
641 .end = AT91CAP9_ID_LCDC,
642 .flags = IORESOURCE_IRQ,
643 },
644};
645
646static struct platform_device at91_lcdc_device = {
647 .name = "atmel_lcdfb",
648 .id = 0,
649 .dev = {
650 .dma_mask = &lcdc_dmamask,
651 .coherent_dma_mask = DMA_BIT_MASK(32),
652 .platform_data = &lcdc_data,
653 },
654 .resource = lcdc_resources,
655 .num_resources = ARRAY_SIZE(lcdc_resources),
656};
657
658void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
659{
660 if (!data)
661 return;
662
663 at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
664 at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
665 at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
666 at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
667 at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
668 at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
669 at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
670 at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
671 at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
672 at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
673 at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
674 at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
675 at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
676 at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
677 at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
678 at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
679 at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
680 at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
681 at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
682 at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
683 at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
684 at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
685
686 lcdc_data = *data;
687 platform_device_register(&at91_lcdc_device);
688}
689#else
690void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
691#endif
692
693
694/* --------------------------------------------------------------------
695 * SSC -- Synchronous Serial Controller
696 * -------------------------------------------------------------------- */
697
698#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
699static u64 ssc0_dmamask = DMA_BIT_MASK(32);
700
701static struct resource ssc0_resources[] = {
702 [0] = {
703 .start = AT91CAP9_BASE_SSC0,
704 .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
705 .flags = IORESOURCE_MEM,
706 },
707 [1] = {
708 .start = AT91CAP9_ID_SSC0,
709 .end = AT91CAP9_ID_SSC0,
710 .flags = IORESOURCE_IRQ,
711 },
712};
713
714static struct platform_device at91cap9_ssc0_device = {
715 .name = "ssc",
716 .id = 0,
717 .dev = {
718 .dma_mask = &ssc0_dmamask,
719 .coherent_dma_mask = DMA_BIT_MASK(32),
720 },
721 .resource = ssc0_resources,
722 .num_resources = ARRAY_SIZE(ssc0_resources),
723};
724
725static inline void configure_ssc0_pins(unsigned pins)
726{
727 if (pins & ATMEL_SSC_TF)
728 at91_set_A_periph(AT91_PIN_PB0, 1);
729 if (pins & ATMEL_SSC_TK)
730 at91_set_A_periph(AT91_PIN_PB1, 1);
731 if (pins & ATMEL_SSC_TD)
732 at91_set_A_periph(AT91_PIN_PB2, 1);
733 if (pins & ATMEL_SSC_RD)
734 at91_set_A_periph(AT91_PIN_PB3, 1);
735 if (pins & ATMEL_SSC_RK)
736 at91_set_A_periph(AT91_PIN_PB4, 1);
737 if (pins & ATMEL_SSC_RF)
738 at91_set_A_periph(AT91_PIN_PB5, 1);
739}
740
741static u64 ssc1_dmamask = DMA_BIT_MASK(32);
742
743static struct resource ssc1_resources[] = {
744 [0] = {
745 .start = AT91CAP9_BASE_SSC1,
746 .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
747 .flags = IORESOURCE_MEM,
748 },
749 [1] = {
750 .start = AT91CAP9_ID_SSC1,
751 .end = AT91CAP9_ID_SSC1,
752 .flags = IORESOURCE_IRQ,
753 },
754};
755
756static struct platform_device at91cap9_ssc1_device = {
757 .name = "ssc",
758 .id = 1,
759 .dev = {
760 .dma_mask = &ssc1_dmamask,
761 .coherent_dma_mask = DMA_BIT_MASK(32),
762 },
763 .resource = ssc1_resources,
764 .num_resources = ARRAY_SIZE(ssc1_resources),
765};
766
767static inline void configure_ssc1_pins(unsigned pins)
768{
769 if (pins & ATMEL_SSC_TF)
770 at91_set_A_periph(AT91_PIN_PB6, 1);
771 if (pins & ATMEL_SSC_TK)
772 at91_set_A_periph(AT91_PIN_PB7, 1);
773 if (pins & ATMEL_SSC_TD)
774 at91_set_A_periph(AT91_PIN_PB8, 1);
775 if (pins & ATMEL_SSC_RD)
776 at91_set_A_periph(AT91_PIN_PB9, 1);
777 if (pins & ATMEL_SSC_RK)
778 at91_set_A_periph(AT91_PIN_PB10, 1);
779 if (pins & ATMEL_SSC_RF)
780 at91_set_A_periph(AT91_PIN_PB11, 1);
781}
782
783/*
784 * SSC controllers are accessed through library code, instead of any
785 * kind of all-singing/all-dancing driver. For example one could be
786 * used by a particular I2S audio codec's driver, while another one
787 * on the same system might be used by a custom data capture driver.
788 */
789void __init at91_add_device_ssc(unsigned id, unsigned pins)
790{
791 struct platform_device *pdev;
792
793 /*
794 * NOTE: caller is responsible for passing information matching
795 * "pins" to whatever will be using each particular controller.
796 */
797 switch (id) {
798 case AT91CAP9_ID_SSC0:
799 pdev = &at91cap9_ssc0_device;
800 configure_ssc0_pins(pins);
801 at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
802 break;
803 case AT91CAP9_ID_SSC1:
804 pdev = &at91cap9_ssc1_device;
805 configure_ssc1_pins(pins);
806 at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
807 break;
808 default:
809 return;
810 }
811
812 platform_device_register(pdev);
813}
814
815#else
816void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
817#endif
818
819
820/* --------------------------------------------------------------------
821 * UART
822 * -------------------------------------------------------------------- */
823
824#if defined(CONFIG_SERIAL_ATMEL)
825static struct resource dbgu_resources[] = {
826 [0] = {
827 .start = AT91_VA_BASE_SYS + AT91_DBGU,
828 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
829 .flags = IORESOURCE_MEM,
830 },
831 [1] = {
832 .start = AT91_ID_SYS,
833 .end = AT91_ID_SYS,
834 .flags = IORESOURCE_IRQ,
835 },
836};
837
838static struct atmel_uart_data dbgu_data = {
839 .use_dma_tx = 0,
840 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
841 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
842};
843
844static u64 dbgu_dmamask = DMA_BIT_MASK(32);
845
846static struct platform_device at91cap9_dbgu_device = {
847 .name = "atmel_usart",
848 .id = 0,
849 .dev = {
850 .dma_mask = &dbgu_dmamask,
851 .coherent_dma_mask = DMA_BIT_MASK(32),
852 .platform_data = &dbgu_data,
853 },
854 .resource = dbgu_resources,
855 .num_resources = ARRAY_SIZE(dbgu_resources),
856};
857
858static inline void configure_dbgu_pins(void)
859{
860 at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
861 at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
862}
863
864static struct resource uart0_resources[] = {
865 [0] = {
866 .start = AT91CAP9_BASE_US0,
867 .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
868 .flags = IORESOURCE_MEM,
869 },
870 [1] = {
871 .start = AT91CAP9_ID_US0,
872 .end = AT91CAP9_ID_US0,
873 .flags = IORESOURCE_IRQ,
874 },
875};
876
877static struct atmel_uart_data uart0_data = {
878 .use_dma_tx = 1,
879 .use_dma_rx = 1,
880};
881
882static u64 uart0_dmamask = DMA_BIT_MASK(32);
883
884static struct platform_device at91cap9_uart0_device = {
885 .name = "atmel_usart",
886 .id = 1,
887 .dev = {
888 .dma_mask = &uart0_dmamask,
889 .coherent_dma_mask = DMA_BIT_MASK(32),
890 .platform_data = &uart0_data,
891 },
892 .resource = uart0_resources,
893 .num_resources = ARRAY_SIZE(uart0_resources),
894};
895
896static inline void configure_usart0_pins(unsigned pins)
897{
898 at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
899 at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
900
901 if (pins & ATMEL_UART_RTS)
902 at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
903 if (pins & ATMEL_UART_CTS)
904 at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
905}
906
907static struct resource uart1_resources[] = {
908 [0] = {
909 .start = AT91CAP9_BASE_US1,
910 .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
911 .flags = IORESOURCE_MEM,
912 },
913 [1] = {
914 .start = AT91CAP9_ID_US1,
915 .end = AT91CAP9_ID_US1,
916 .flags = IORESOURCE_IRQ,
917 },
918};
919
920static struct atmel_uart_data uart1_data = {
921 .use_dma_tx = 1,
922 .use_dma_rx = 1,
923};
924
925static u64 uart1_dmamask = DMA_BIT_MASK(32);
926
927static struct platform_device at91cap9_uart1_device = {
928 .name = "atmel_usart",
929 .id = 2,
930 .dev = {
931 .dma_mask = &uart1_dmamask,
932 .coherent_dma_mask = DMA_BIT_MASK(32),
933 .platform_data = &uart1_data,
934 },
935 .resource = uart1_resources,
936 .num_resources = ARRAY_SIZE(uart1_resources),
937};
938
939static inline void configure_usart1_pins(unsigned pins)
940{
941 at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
942 at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
943
944 if (pins & ATMEL_UART_RTS)
945 at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
946 if (pins & ATMEL_UART_CTS)
947 at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
948}
949
950static struct resource uart2_resources[] = {
951 [0] = {
952 .start = AT91CAP9_BASE_US2,
953 .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
954 .flags = IORESOURCE_MEM,
955 },
956 [1] = {
957 .start = AT91CAP9_ID_US2,
958 .end = AT91CAP9_ID_US2,
959 .flags = IORESOURCE_IRQ,
960 },
961};
962
963static struct atmel_uart_data uart2_data = {
964 .use_dma_tx = 1,
965 .use_dma_rx = 1,
966};
967
968static u64 uart2_dmamask = DMA_BIT_MASK(32);
969
970static struct platform_device at91cap9_uart2_device = {
971 .name = "atmel_usart",
972 .id = 3,
973 .dev = {
974 .dma_mask = &uart2_dmamask,
975 .coherent_dma_mask = DMA_BIT_MASK(32),
976 .platform_data = &uart2_data,
977 },
978 .resource = uart2_resources,
979 .num_resources = ARRAY_SIZE(uart2_resources),
980};
981
982static inline void configure_usart2_pins(unsigned pins)
983{
984 at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
985 at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
986
987 if (pins & ATMEL_UART_RTS)
988 at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
989 if (pins & ATMEL_UART_CTS)
990 at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
991}
992
993static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
994struct platform_device *atmel_default_console_device; /* the serial console device */
995
996void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
997{
998 struct platform_device *pdev;
999
1000 switch (id) {
1001 case 0: /* DBGU */
1002 pdev = &at91cap9_dbgu_device;
1003 configure_dbgu_pins();
1004 at91_clock_associate("mck", &pdev->dev, "usart");
1005 break;
1006 case AT91CAP9_ID_US0:
1007 pdev = &at91cap9_uart0_device;
1008 configure_usart0_pins(pins);
1009 at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1010 break;
1011 case AT91CAP9_ID_US1:
1012 pdev = &at91cap9_uart1_device;
1013 configure_usart1_pins(pins);
1014 at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1015 break;
1016 case AT91CAP9_ID_US2:
1017 pdev = &at91cap9_uart2_device;
1018 configure_usart2_pins(pins);
1019 at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1020 break;
1021 default:
1022 return;
1023 }
1024 pdev->id = portnr; /* update to mapped ID */
1025
1026 if (portnr < ATMEL_MAX_UART)
1027 at91_uarts[portnr] = pdev;
1028}
1029
1030void __init at91_set_serial_console(unsigned portnr)
1031{
1032 if (portnr < ATMEL_MAX_UART)
1033 atmel_default_console_device = at91_uarts[portnr];
1034 if (!atmel_default_console_device)
1035 printk(KERN_INFO "AT91: No default serial console defined.\n");
1036}
1037
1038void __init at91_add_device_serial(void)
1039{
1040 int i;
1041
1042 for (i = 0; i < ATMEL_MAX_UART; i++) {
1043 if (at91_uarts[i])
1044 platform_device_register(at91_uarts[i]);
1045 }
1046}
1047#else
1048void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1049void __init at91_set_serial_console(unsigned portnr) {}
1050void __init at91_add_device_serial(void) {}
1051#endif
1052
1053
1054/* -------------------------------------------------------------------- */
1055/*
1056 * These devices are always present and don't need any board-specific
1057 * setup.
1058 */
1059static int __init at91_add_standard_devices(void)
1060{
1061 at91_add_device_rtt();
1062 at91_add_device_watchdog();
1063 return 0;
1064}
1065
1066arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 57c3b647ce83..ec76eeaafd45 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock)
574 } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) { 574 } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
575 uhpck.pmc_mask = AT91SAM926x_PMC_UHP; 575 uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
576 udpck.pmc_mask = AT91SAM926x_PMC_UDP; 576 udpck.pmc_mask = AT91SAM926x_PMC_UDP;
577 } else if (cpu_is_at91cap9()) {
578 uhpck.pmc_mask = AT91CAP9_PMC_UHP;
577 } 579 }
578 at91_sys_write(AT91_CKGR_PLLBR, 0); 580 at91_sys_write(AT91_CKGR_PLLBR, 0);
579 581
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 77d4c0a37842..b5daf7f5e011 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock);
15extern void __init at91sam9263_initialize(unsigned long main_clock); 15extern void __init at91sam9263_initialize(unsigned long main_clock);
16extern void __init at91sam9rl_initialize(unsigned long main_clock); 16extern void __init at91sam9rl_initialize(unsigned long main_clock);
17extern void __init at91x40_initialize(unsigned long main_clock); 17extern void __init at91x40_initialize(unsigned long main_clock);
18extern void __init at91cap9_initialize(unsigned long main_clock);
18 19
19 /* Interrupts */ 20 /* Interrupts */
20extern void __init at91rm9200_init_interrupts(unsigned int priority[]); 21extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
23extern void __init at91sam9263_init_interrupts(unsigned int priority[]); 24extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
24extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); 25extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
25extern void __init at91x40_init_interrupts(unsigned int priority[]); 26extern void __init at91x40_init_interrupts(unsigned int priority[]);
27extern void __init at91cap9_init_interrupts(unsigned int priority[]);
26extern void __init at91_aic_init(unsigned int priority[]); 28extern void __init at91_aic_init(unsigned int priority[]);
27 29
28 /* Timer */ 30 /* Timer */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 98cb61482917..4b120cc36135 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void)
80 pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); 80 pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
81 return 0; 81 return 0;
82 } 82 }
83 } else if (cpu_is_at91cap9()) {
84 if ((scsr & AT91CAP9_PMC_UHP) != 0) {
85 pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
86 return 0;
87 }
83 } 88 }
84 89
85#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS 90#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-20 10:38:54 -0500