aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/Kconfig148
-rw-r--r--arch/arm/mach-at91/Makefile49
-rw-r--r--arch/arm/mach-at91/Makefile.boot9
-rw-r--r--arch/arm/mach-at91/at91rm9200.c294
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c875
-rw-r--r--arch/arm/mach-at91/at91rm9200_time.c146
-rw-r--r--arch/arm/mach-at91/at91sam9260.c295
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c867
-rw-r--r--arch/arm/mach-at91/at91sam9261.c290
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c741
-rw-r--r--arch/arm/mach-at91/at91sam926x_time.c114
-rw-r--r--arch/arm/mach-at91/board-1arm.c102
-rw-r--r--arch/arm/mach-at91/board-carmeva.c149
-rw-r--r--arch/arm/mach-at91/board-csb337.c145
-rw-r--r--arch/arm/mach-at91/board-csb637.c109
-rw-r--r--arch/arm/mach-at91/board-dk.c216
-rw-r--r--arch/arm/mach-at91/board-eb9200.c123
-rw-r--r--arch/arm/mach-at91/board-ek.c174
-rw-r--r--arch/arm/mach-at91/board-kafa.c109
-rw-r--r--arch/arm/mach-at91/board-kb9202.c143
-rw-r--r--arch/arm/mach-at91/board-sam9260ek.c202
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c259
-rw-r--r--arch/arm/mach-at91/clock.c644
-rw-r--r--arch/arm/mach-at91/clock.h31
-rw-r--r--arch/arm/mach-at91/generic.h49
-rw-r--r--arch/arm/mach-at91/gpio.c414
-rw-r--r--arch/arm/mach-at91/irq.c168
-rw-r--r--arch/arm/mach-at91/leds.c99
-rw-r--r--arch/arm/mach-at91/pm.c227
29 files changed, 7191 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
new file mode 100644
index 000000000000..9f11db8af233
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig
@@ -0,0 +1,148 @@
1if ARCH_AT91
2
3menu "Atmel AT91 System-on-Chip"
4
5choice
6 prompt "Atmel AT91 Processor"
7
8config ARCH_AT91RM9200
9 bool "AT91RM9200"
10
11config ARCH_AT91SAM9260
12 bool "AT91SAM9260"
13
14config ARCH_AT91SAM9261
15 bool "AT91SAM9261"
16
17endchoice
18
19# ----------------------------------------------------------
20
21if ARCH_AT91RM9200
22
23comment "AT91RM9200 Board Type"
24
25config MACH_ONEARM
26 bool "Ajeco 1ARM Single Board Computer"
27 depends on ARCH_AT91RM9200
28 help
29 Select this if you are using Ajeco's 1ARM Single Board Computer.
30 <http://www.ajeco.fi/products.htm>
31
32config ARCH_AT91RM9200DK
33 bool "Atmel AT91RM9200-DK Development board"
34 depends on ARCH_AT91RM9200
35 help
36 Select this if you are using Atmel's AT91RM9200-DK Development board.
37 (Discontinued)
38
39config MACH_AT91RM9200EK
40 bool "Atmel AT91RM9200-EK Evaluation Kit"
41 depends on ARCH_AT91RM9200
42 help
43 Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
44 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
45
46config MACH_CSB337
47 bool "Cogent CSB337"
48 depends on ARCH_AT91RM9200
49 help
50 Select this if you are using Cogent's CSB337 board.
51 <http://www.cogcomp.com/csb_csb337.htm>
52
53config MACH_CSB637
54 bool "Cogent CSB637"
55 depends on ARCH_AT91RM9200
56 help
57 Select this if you are using Cogent's CSB637 board.
58 <http://www.cogcomp.com/csb_csb637.htm>
59
60config MACH_CARMEVA
61 bool "Conitec ARM&EVA"
62 depends on ARCH_AT91RM9200
63 help
64 Select this if you are using Conitec's AT91RM9200-MCU-Module.
65 <http://www.conitec.net/english/linuxboard.htm>
66
67config MACH_ATEB9200
68 bool "Embest ATEB9200"
69 depends on ARCH_AT91RM9200
70 help
71 Select this if you are using Embest's ATEB9200 board.
72 <http://www.embedinfo.com/english/product/ATEB9200.asp>
73
74config MACH_KB9200
75 bool "KwikByte KB920x"
76 depends on ARCH_AT91RM9200
77 help
78 Select this if you are using KwikByte's KB920x board.
79 <http://kwikbyte.com/KB9202_description_new.htm>
80
81config MACH_KAFA
82 bool "Sperry-Sun KAFA board"
83 depends on ARCH_AT91RM9200
84 help
85 Select this if you are using Sperry-Sun's KAFA board.
86
87endif
88
89# ----------------------------------------------------------
90
91if ARCH_AT91SAM9260
92
93comment "AT91SAM9260 Board Type"
94
95config MACH_AT91SAM9260EK
96 bool "Atmel AT91SAM9260-EK Evaluation Kit"
97 depends on ARCH_AT91SAM9260
98 help
99 Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
100 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
101
102endif
103
104# ----------------------------------------------------------
105
106if ARCH_AT91SAM9261
107
108comment "AT91SAM9261 Board Type"
109
110config MACH_AT91SAM9261EK
111 bool "Atmel AT91SAM9261-EK Evaluation Kit"
112 depends on ARCH_AT91SAM9261
113 help
114 Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
115 <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
116
117endif
118
119# ----------------------------------------------------------
120
121comment "AT91 Board Options"
122
123config MTD_AT91_DATAFLASH_CARD
124 bool "Enable DataFlash Card support"
125 depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
126 help
127 Enable support for the DataFlash card.
128
129config MTD_NAND_AT91_BUSWIDTH_16
130 bool "Enable 16-bit data bus interface to NAND flash"
131 depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
132 help
133 On AT91SAM926x boards both types of NAND flash can be present
134 (8 and 16 bit data bus width).
135
136# ----------------------------------------------------------
137
138comment "AT91 Feature Selections"
139
140config AT91_PROGRAMMABLE_CLOCKS
141 bool "Programmable Clocks"
142 help
143 Select this if you need to program one or more of the PCK0..PCK3
144 programmable clock outputs.
145
146endmenu
147
148endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
new file mode 100644
index 000000000000..cf777007847a
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile
@@ -0,0 +1,49 @@
1#
2# Makefile for the linux kernel.
3#
4
5obj-y := clock.o irq.o gpio.o
6obj-m :=
7obj-n :=
8obj- :=
9
10obj-$(CONFIG_PM) += pm.o
11
12# CPU-specific support
13obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
14obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
15obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
16
17# AT91RM9200 board-specific support
18obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
19obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
20obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
21obj-$(CONFIG_MACH_CSB337) += board-csb337.o
22obj-$(CONFIG_MACH_CSB637) += board-csb637.o
23obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
24obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
25obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
26obj-$(CONFIG_MACH_KAFA) += board-kafa.o
27
28# AT91SAM9260 board-specific support
29obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
30
31# AT91SAM9261 board-specific support
32obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
33
34# LEDs support
35led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
36led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
37led-$(CONFIG_MACH_CSB337) += leds.o
38led-$(CONFIG_MACH_CSB637) += leds.o
39led-$(CONFIG_MACH_KB9200) += leds.o
40led-$(CONFIG_MACH_KAFA) += leds.o
41obj-$(CONFIG_LEDS) += $(led-y)
42
43# VGA support
44#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
45
46
47ifeq ($(CONFIG_PM_DEBUG),y)
48CFLAGS_pm.o += -DDEBUG
49endif
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
new file mode 100644
index 000000000000..e667dcc7cd34
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -0,0 +1,9 @@
1# Note: the following conditions must always be true:
2# ZRELADDR == virt_to_phys(TEXTADDR)
3# PARAMS_PHYS must be within 4MB of ZRELADDR
4# INITRD_PHYS must be in RAM
5
6 zreladdr-y := 0x20008000
7params_phys-y := 0x20000100
8initrd_phys-y := 0x20410000
9
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
new file mode 100644
index 000000000000..870d4a4eb806
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -0,0 +1,294 @@
1/*
2 * arch/arm/mach-at91/at91rm9200.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 */
12
13#include <linux/module.h>
14
15#include <asm/mach/arch.h>
16#include <asm/mach/map.h>
17#include <asm/arch/at91rm9200.h>
18#include <asm/arch/at91_pmc.h>
19#include <asm/arch/at91_st.h>
20
21#include "generic.h"
22#include "clock.h"
23
24static struct map_desc at91rm9200_io_desc[] __initdata = {
25 {
26 .virtual = AT91_VA_BASE_SYS,
27 .pfn = __phys_to_pfn(AT91_BASE_SYS),
28 .length = SZ_4K,
29 .type = MT_DEVICE,
30 }, {
31 .virtual = AT91_VA_BASE_EMAC,
32 .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
33 .length = SZ_16K,
34 .type = MT_DEVICE,
35 }, {
36 .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
37 .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
38 .length = AT91RM9200_SRAM_SIZE,
39 .type = MT_DEVICE,
40 },
41};
42
43/* --------------------------------------------------------------------
44 * Clocks
45 * -------------------------------------------------------------------- */
46
47/*
48 * The peripheral clocks.
49 */
50static struct clk udc_clk = {
51 .name = "udc_clk",
52 .pmc_mask = 1 << AT91RM9200_ID_UDP,
53 .type = CLK_TYPE_PERIPHERAL,
54};
55static struct clk ohci_clk = {
56 .name = "ohci_clk",
57 .pmc_mask = 1 << AT91RM9200_ID_UHP,
58 .type = CLK_TYPE_PERIPHERAL,
59};
60static struct clk ether_clk = {
61 .name = "ether_clk",
62 .pmc_mask = 1 << AT91RM9200_ID_EMAC,
63 .type = CLK_TYPE_PERIPHERAL,
64};
65static struct clk mmc_clk = {
66 .name = "mci_clk",
67 .pmc_mask = 1 << AT91RM9200_ID_MCI,
68 .type = CLK_TYPE_PERIPHERAL,
69};
70static struct clk twi_clk = {
71 .name = "twi_clk",
72 .pmc_mask = 1 << AT91RM9200_ID_TWI,
73 .type = CLK_TYPE_PERIPHERAL,
74};
75static struct clk usart0_clk = {
76 .name = "usart0_clk",
77 .pmc_mask = 1 << AT91RM9200_ID_US0,
78 .type = CLK_TYPE_PERIPHERAL,
79};
80static struct clk usart1_clk = {
81 .name = "usart1_clk",
82 .pmc_mask = 1 << AT91RM9200_ID_US1,
83 .type = CLK_TYPE_PERIPHERAL,
84};
85static struct clk usart2_clk = {
86 .name = "usart2_clk",
87 .pmc_mask = 1 << AT91RM9200_ID_US2,
88 .type = CLK_TYPE_PERIPHERAL,
89};
90static struct clk usart3_clk = {
91 .name = "usart3_clk",
92 .pmc_mask = 1 << AT91RM9200_ID_US3,
93 .type = CLK_TYPE_PERIPHERAL,
94};
95static struct clk spi_clk = {
96 .name = "spi_clk",
97 .pmc_mask = 1 << AT91RM9200_ID_SPI,
98 .type = CLK_TYPE_PERIPHERAL,
99};
100static struct clk pioA_clk = {
101 .name = "pioA_clk",
102 .pmc_mask = 1 << AT91RM9200_ID_PIOA,
103 .type = CLK_TYPE_PERIPHERAL,
104};
105static struct clk pioB_clk = {
106 .name = "pioB_clk",
107 .pmc_mask = 1 << AT91RM9200_ID_PIOB,
108 .type = CLK_TYPE_PERIPHERAL,
109};
110static struct clk pioC_clk = {
111 .name = "pioC_clk",
112 .pmc_mask = 1 << AT91RM9200_ID_PIOC,
113 .type = CLK_TYPE_PERIPHERAL,
114};
115static struct clk pioD_clk = {
116 .name = "pioD_clk",
117 .pmc_mask = 1 << AT91RM9200_ID_PIOD,
118 .type = CLK_TYPE_PERIPHERAL,
119};
120
121static struct clk *periph_clocks[] __initdata = {
122 &pioA_clk,
123 &pioB_clk,
124 &pioC_clk,
125 &pioD_clk,
126 &usart0_clk,
127 &usart1_clk,
128 &usart2_clk,
129 &usart3_clk,
130 &mmc_clk,
131 &udc_clk,
132 &twi_clk,
133 &spi_clk,
134 // ssc 0 .. ssc2
135 // tc0 .. tc5
136 &ohci_clk,
137 &ether_clk,
138 // irq0 .. irq6
139};
140
141/*
142 * The four programmable clocks.
143 * You must configure pin multiplexing to bring these signals out.
144 */
145static struct clk pck0 = {
146 .name = "pck0",
147 .pmc_mask = AT91_PMC_PCK0,
148 .type = CLK_TYPE_PROGRAMMABLE,
149 .id = 0,
150};
151static struct clk pck1 = {
152 .name = "pck1",
153 .pmc_mask = AT91_PMC_PCK1,
154 .type = CLK_TYPE_PROGRAMMABLE,
155 .id = 1,
156};
157static struct clk pck2 = {
158 .name = "pck2",
159 .pmc_mask = AT91_PMC_PCK2,
160 .type = CLK_TYPE_PROGRAMMABLE,
161 .id = 2,
162};
163static struct clk pck3 = {
164 .name = "pck3",
165 .pmc_mask = AT91_PMC_PCK3,
166 .type = CLK_TYPE_PROGRAMMABLE,
167 .id = 3,
168};
169
170static void __init at91rm9200_register_clocks(void)
171{
172 int i;
173
174 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
175 clk_register(periph_clocks[i]);
176
177 clk_register(&pck0);
178 clk_register(&pck1);
179 clk_register(&pck2);
180 clk_register(&pck3);
181}
182
183/* --------------------------------------------------------------------
184 * GPIO
185 * -------------------------------------------------------------------- */
186
187static struct at91_gpio_bank at91rm9200_gpio[] = {
188 {
189 .id = AT91RM9200_ID_PIOA,
190 .offset = AT91_PIOA,
191 .clock = &pioA_clk,
192 }, {
193 .id = AT91RM9200_ID_PIOB,
194 .offset = AT91_PIOB,
195 .clock = &pioB_clk,
196 }, {
197 .id = AT91RM9200_ID_PIOC,
198 .offset = AT91_PIOC,
199 .clock = &pioC_clk,
200 }, {
201 .id = AT91RM9200_ID_PIOD,
202 .offset = AT91_PIOD,
203 .clock = &pioD_clk,
204 }
205};
206
207static void at91rm9200_reset(void)
208{
209 /*
210 * Perform a hardware reset with the use of the Watchdog timer.
211 */
212 at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
213 at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
214}
215
216
217/* --------------------------------------------------------------------
218 * AT91RM9200 processor initialization
219 * -------------------------------------------------------------------- */
220void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
221{
222 /* Map peripherals */
223 iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
224
225 at91_arch_reset = at91rm9200_reset;
226 at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
227 | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
228 | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
229 | (1 << AT91RM9200_ID_IRQ6);
230
231 /* Init clock subsystem */
232 at91_clock_init(main_clock);
233
234 /* Register the processor-specific clocks */
235 at91rm9200_register_clocks();
236
237 /* Initialize GPIO subsystem */
238 at91_gpio_init(at91rm9200_gpio, banks);
239}
240
241
242/* --------------------------------------------------------------------
243 * Interrupt initialization
244 * -------------------------------------------------------------------- */
245
246/*
247 * The default interrupt priority levels (0 = lowest, 7 = highest).
248 */
249static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
250 7, /* Advanced Interrupt Controller (FIQ) */
251 7, /* System Peripherals */
252 0, /* Parallel IO Controller A */
253 0, /* Parallel IO Controller B */
254 0, /* Parallel IO Controller C */
255 0, /* Parallel IO Controller D */
256 6, /* USART 0 */
257 6, /* USART 1 */
258 6, /* USART 2 */
259 6, /* USART 3 */
260 0, /* Multimedia Card Interface */
261 4, /* USB Device Port */
262 0, /* Two-Wire Interface */
263 6, /* Serial Peripheral Interface */
264 5, /* Serial Synchronous Controller 0 */
265 5, /* Serial Synchronous Controller 1 */
266 5, /* Serial Synchronous Controller 2 */
267 0, /* Timer Counter 0 */
268 0, /* Timer Counter 1 */
269 0, /* Timer Counter 2 */
270 0, /* Timer Counter 3 */
271 0, /* Timer Counter 4 */
272 0, /* Timer Counter 5 */
273 3, /* USB Host port */
274 3, /* Ethernet MAC */
275 0, /* Advanced Interrupt Controller (IRQ0) */
276 0, /* Advanced Interrupt Controller (IRQ1) */
277 0, /* Advanced Interrupt Controller (IRQ2) */
278 0, /* Advanced Interrupt Controller (IRQ3) */
279 0, /* Advanced Interrupt Controller (IRQ4) */
280 0, /* Advanced Interrupt Controller (IRQ5) */
281 0 /* Advanced Interrupt Controller (IRQ6) */
282};
283
284void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
285{
286 if (!priority)
287 priority = at91rm9200_default_irq_priority;
288
289 /* Initialize the AIC interrupt controller */
290 at91_aic_init(priority);
291
292 /* Enable GPIO interrupts */
293 at91_gpio_irq_setup();
294}
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
new file mode 100644
index 000000000000..a06498ccc826
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -0,0 +1,875 @@
1/*
2 * arch/arm/mach-at91/at91rm9200_devices.c
3 *
4 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
5 * Copyright (C) 2005 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 */
13#include <asm/mach/arch.h>
14#include <asm/mach/map.h>
15
16#include <linux/platform_device.h>
17
18#include <asm/arch/board.h>
19#include <asm/arch/gpio.h>
20#include <asm/arch/at91rm9200.h>
21#include <asm/arch/at91rm9200_mc.h>
22
23#include "generic.h"
24
25#define SZ_512 0x00000200
26#define SZ_256 0x00000100
27#define SZ_16 0x00000010
28
29/* --------------------------------------------------------------------
30 * USB Host
31 * -------------------------------------------------------------------- */
32
33#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
34static u64 ohci_dmamask = 0xffffffffUL;
35static struct at91_usbh_data usbh_data;
36
37static struct resource usbh_resources[] = {
38 [0] = {
39 .start = AT91RM9200_UHP_BASE,
40 .end = AT91RM9200_UHP_BASE + SZ_1M - 1,
41 .flags = IORESOURCE_MEM,
42 },
43 [1] = {
44 .start = AT91RM9200_ID_UHP,
45 .end = AT91RM9200_ID_UHP,
46 .flags = IORESOURCE_IRQ,
47 },
48};
49
50static struct platform_device at91rm9200_usbh_device = {
51 .name = "at91_ohci",
52 .id = -1,
53 .dev = {
54 .dma_mask = &ohci_dmamask,
55 .coherent_dma_mask = 0xffffffff,
56 .platform_data = &usbh_data,
57 },
58 .resource = usbh_resources,
59 .num_resources = ARRAY_SIZE(usbh_resources),
60};
61
62void __init at91_add_device_usbh(struct at91_usbh_data *data)
63{
64 if (!data)
65 return;
66
67 usbh_data = *data;
68 platform_device_register(&at91rm9200_usbh_device);
69}
70#else
71void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
72#endif
73
74
75/* --------------------------------------------------------------------
76 * USB Device (Gadget)
77 * -------------------------------------------------------------------- */
78
79#ifdef CONFIG_USB_GADGET_AT91
80static struct at91_udc_data udc_data;
81
82static struct resource udc_resources[] = {
83 [0] = {
84 .start = AT91RM9200_BASE_UDP,
85 .end = AT91RM9200_BASE_UDP + SZ_16K - 1,
86 .flags = IORESOURCE_MEM,
87 },
88 [1] = {
89 .start = AT91RM9200_ID_UDP,
90 .end = AT91RM9200_ID_UDP,
91 .flags = IORESOURCE_IRQ,
92 },
93};
94
95static struct platform_device at91rm9200_udc_device = {
96 .name = "at91_udc",
97 .id = -1,
98 .dev = {
99 .platform_data = &udc_data,
100 },
101 .resource = udc_resources,
102 .num_resources = ARRAY_SIZE(udc_resources),
103};
104
105void __init at91_add_device_udc(struct at91_udc_data *data)
106{
107 if (!data)
108 return;
109
110 if (data->vbus_pin) {
111 at91_set_gpio_input(data->vbus_pin, 0);
112 at91_set_deglitch(data->vbus_pin, 1);
113 }
114 if (data->pullup_pin)
115 at91_set_gpio_output(data->pullup_pin, 0);
116
117 udc_data = *data;
118 platform_device_register(&at91rm9200_udc_device);
119}
120#else
121void __init at91_add_device_udc(struct at91_udc_data *data) {}
122#endif
123
124
125/* --------------------------------------------------------------------
126 * Ethernet
127 * -------------------------------------------------------------------- */
128
129#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
130static u64 eth_dmamask = 0xffffffffUL;
131static struct at91_eth_data eth_data;
132
133static struct resource eth_resources[] = {
134 [0] = {
135 .start = AT91_VA_BASE_EMAC,
136 .end = AT91_VA_BASE_EMAC + SZ_16K - 1,
137 .flags = IORESOURCE_MEM,
138 },
139 [1] = {
140 .start = AT91RM9200_ID_EMAC,
141 .end = AT91RM9200_ID_EMAC,
142 .flags = IORESOURCE_IRQ,
143 },
144};
145
146static struct platform_device at91rm9200_eth_device = {
147 .name = "at91_ether",
148 .id = -1,
149 .dev = {
150 .dma_mask = &eth_dmamask,
151 .coherent_dma_mask = 0xffffffff,
152 .platform_data = &eth_data,
153 },
154 .resource = eth_resources,
155 .num_resources = ARRAY_SIZE(eth_resources),
156};
157
158void __init at91_add_device_eth(struct at91_eth_data *data)
159{
160 if (!data)
161 return;
162
163 if (data->phy_irq_pin) {
164 at91_set_gpio_input(data->phy_irq_pin, 0);
165 at91_set_deglitch(data->phy_irq_pin, 1);
166 }
167
168 /* Pins used for MII and RMII */
169 at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */
170 at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */
171 at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */
172 at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
173 at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
174 at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */
175 at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */
176 at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */
177 at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */
178 at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */
179
180 if (!data->is_rmii) {
181 at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */
182 at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */
183 at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */
184 at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */
185 at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */
186 at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */
187 at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */
188 at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */
189 }
190
191 eth_data = *data;
192 platform_device_register(&at91rm9200_eth_device);
193}
194#else
195void __init at91_add_device_eth(struct at91_eth_data *data) {}
196#endif
197
198
199/* --------------------------------------------------------------------
200 * Compact Flash / PCMCIA
201 * -------------------------------------------------------------------- */
202
203#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
204static struct at91_cf_data cf_data;
205
206#define CF_BASE AT91_CHIPSELECT_4
207
208static struct resource cf_resources[] = {
209 [0] = {
210 .start = CF_BASE,
211 /* ties up CS4, CS5 and CS6 */
212 .end = CF_BASE + (0x30000000 - 1),
213 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
214 },
215};
216
217static struct platform_device at91rm9200_cf_device = {
218 .name = "at91_cf",
219 .id = -1,
220 .dev = {
221 .platform_data = &cf_data,
222 },
223 .resource = cf_resources,
224 .num_resources = ARRAY_SIZE(cf_resources),
225};
226
227void __init at91_add_device_cf(struct at91_cf_data *data)
228{
229 unsigned int csa;
230
231 if (!data)
232 return;
233
234 data->chipselect = 4; /* can only use EBI ChipSelect 4 */
235
236 /* CF takes over CS4, CS5, CS6 */
237 csa = at91_sys_read(AT91_EBI_CSA);
238 at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
239
240 /*
241 * Static memory controller timing adjustments.
242 * REVISIT: these timings are in terms of MCK cycles, so
243 * when MCK changes (cpufreq etc) so must these values...
244 */
245 at91_sys_write(AT91_SMC_CSR(4),
246 AT91_SMC_ACSS_STD
247 | AT91_SMC_DBW_16
248 | AT91_SMC_BAT
249 | AT91_SMC_WSEN
250 | AT91_SMC_NWS_(32) /* wait states */
251 | AT91_SMC_RWSETUP_(6) /* setup time */
252 | AT91_SMC_RWHOLD_(4) /* hold time */
253 );
254
255 /* input/irq */
256 if (data->irq_pin) {
257 at91_set_gpio_input(data->irq_pin, 1);
258 at91_set_deglitch(data->irq_pin, 1);
259 }
260 at91_set_gpio_input(data->det_pin, 1);
261 at91_set_deglitch(data->det_pin, 1);
262
263 /* outputs, initially off */
264 if (data->vcc_pin)
265 at91_set_gpio_output(data->vcc_pin, 0);
266 at91_set_gpio_output(data->rst_pin, 0);
267
268 /* force poweron defaults for these pins ... */
269 at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */
270 at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */
271 at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
272 at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
273
274 /* nWAIT is _not_ a default setting */
275 at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
276
277 cf_data = *data;
278 platform_device_register(&at91rm9200_cf_device);
279}
280#else
281void __init at91_add_device_cf(struct at91_cf_data *data) {}
282#endif
283
284
285/* --------------------------------------------------------------------
286 * MMC / SD
287 * -------------------------------------------------------------------- */
288
289#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
290static u64 mmc_dmamask = 0xffffffffUL;
291static struct at91_mmc_data mmc_data;
292
293static struct resource mmc_resources[] = {
294 [0] = {
295 .start = AT91RM9200_BASE_MCI,
296 .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
297 .flags = IORESOURCE_MEM,
298 },
299 [1] = {
300 .start = AT91RM9200_ID_MCI,
301 .end = AT91RM9200_ID_MCI,
302 .flags = IORESOURCE_IRQ,
303 },
304};
305
306static struct platform_device at91rm9200_mmc_device = {
307 .name = "at91_mci",
308 .id = -1,
309 .dev = {
310 .dma_mask = &mmc_dmamask,
311 .coherent_dma_mask = 0xffffffff,
312 .platform_data = &mmc_data,
313 },
314 .resource = mmc_resources,
315 .num_resources = ARRAY_SIZE(mmc_resources),
316};
317
318void __init at91_add_device_mmc(struct at91_mmc_data *data)
319{
320 if (!data)
321 return;
322
323 /* input/irq */
324 if (data->det_pin) {
325 at91_set_gpio_input(data->det_pin, 1);
326 at91_set_deglitch(data->det_pin, 1);
327 }
328 if (data->wp_pin)
329 at91_set_gpio_input(data->wp_pin, 1);
330 if (data->vcc_pin)
331 at91_set_gpio_output(data->vcc_pin, 0);
332
333 /* CLK */
334 at91_set_A_periph(AT91_PIN_PA27, 0);
335
336 if (data->slot_b) {
337 /* CMD */
338 at91_set_B_periph(AT91_PIN_PA8, 1);
339
340 /* DAT0, maybe DAT1..DAT3 */
341 at91_set_B_periph(AT91_PIN_PA9, 1);
342 if (data->wire4) {
343 at91_set_B_periph(AT91_PIN_PA10, 1);
344 at91_set_B_periph(AT91_PIN_PA11, 1);
345 at91_set_B_periph(AT91_PIN_PA12, 1);
346 }
347 } else {
348 /* CMD */
349 at91_set_A_periph(AT91_PIN_PA28, 1);
350
351 /* DAT0, maybe DAT1..DAT3 */
352 at91_set_A_periph(AT91_PIN_PA29, 1);
353 if (data->wire4) {
354 at91_set_B_periph(AT91_PIN_PB3, 1);
355 at91_set_B_periph(AT91_PIN_PB4, 1);
356 at91_set_B_periph(AT91_PIN_PB5, 1);
357 }
358 }
359
360 mmc_data = *data;
361 platform_device_register(&at91rm9200_mmc_device);
362}
363#else
364void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
365#endif
366
367
368/* --------------------------------------------------------------------
369 * NAND / SmartMedia
370 * -------------------------------------------------------------------- */
371
372#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
373static struct at91_nand_data nand_data;
374
375#define NAND_BASE AT91_CHIPSELECT_3
376
377static struct resource nand_resources[] = {
378 {
379 .start = NAND_BASE,
380 .end = NAND_BASE + SZ_8M - 1,
381 .flags = IORESOURCE_MEM,
382 }
383};
384
385static struct platform_device at91rm9200_nand_device = {
386 .name = "at91_nand",
387 .id = -1,
388 .dev = {
389 .platform_data = &nand_data,
390 },
391 .resource = nand_resources,
392 .num_resources = ARRAY_SIZE(nand_resources),
393};
394
395void __init at91_add_device_nand(struct at91_nand_data *data)
396{
397 unsigned int csa;
398
399 if (!data)
400 return;
401
402 /* enable the address range of CS3 */
403 csa = at91_sys_read(AT91_EBI_CSA);
404 at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
405
406 /* set the bus interface characteristics */
407 at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
408 | AT91_SMC_NWS_(5)
409 | AT91_SMC_TDF_(1)
410 | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
411 | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */
412 );
413
414 /* enable pin */
415 if (data->enable_pin)
416 at91_set_gpio_output(data->enable_pin, 1);
417
418 /* ready/busy pin */
419 if (data->rdy_pin)
420 at91_set_gpio_input(data->rdy_pin, 1);
421
422 /* card detect pin */
423 if (data->det_pin)
424 at91_set_gpio_input(data->det_pin, 1);
425
426 at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
427 at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
428
429 nand_data = *data;
430 platform_device_register(&at91rm9200_nand_device);
431}
432#else
433void __init at91_add_device_nand(struct at91_nand_data *data) {}
434#endif
435
436
437/* --------------------------------------------------------------------
438 * TWI (i2c)
439 * -------------------------------------------------------------------- */
440
441#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
442
443static struct resource twi_resources[] = {
444 [0] = {
445 .start = AT91RM9200_BASE_TWI,
446 .end = AT91RM9200_BASE_TWI + SZ_16K - 1,
447 .flags = IORESOURCE_MEM,
448 },
449 [1] = {
450 .start = AT91RM9200_ID_TWI,
451 .end = AT91RM9200_ID_TWI,
452 .flags = IORESOURCE_IRQ,
453 },
454};
455
456static struct platform_device at91rm9200_twi_device = {
457 .name = "at91_i2c",
458 .id = -1,
459 .resource = twi_resources,
460 .num_resources = ARRAY_SIZE(twi_resources),
461};
462
463void __init at91_add_device_i2c(void)
464{
465 /* pins used for TWI interface */
466 at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
467 at91_set_multi_drive(AT91_PIN_PA25, 1);
468
469 at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
470 at91_set_multi_drive(AT91_PIN_PA26, 1);
471
472 platform_device_register(&at91rm9200_twi_device);
473}
474#else
475void __init at91_add_device_i2c(void) {}
476#endif
477
478
479/* --------------------------------------------------------------------
480 * SPI
481 * -------------------------------------------------------------------- */
482
483#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
484static u64 spi_dmamask = 0xffffffffUL;
485
486static struct resource spi_resources[] = {
487 [0] = {
488 .start = AT91RM9200_BASE_SPI,
489 .end = AT91RM9200_BASE_SPI + SZ_16K - 1,
490 .flags = IORESOURCE_MEM,
491 },
492 [1] = {
493 .start = AT91RM9200_ID_SPI,
494 .end = AT91RM9200_ID_SPI,
495 .flags = IORESOURCE_IRQ,
496 },
497};
498
499static struct platform_device at91rm9200_spi_device = {
500 .name = "at91_spi",
501 .id = 0,
502 .dev = {
503 .dma_mask = &spi_dmamask,
504 .coherent_dma_mask = 0xffffffff,
505 },
506 .resource = spi_resources,
507 .num_resources = ARRAY_SIZE(spi_resources),
508};
509
510static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
511
512void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
513{
514 int i;
515 unsigned long cs_pin;
516
517 at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */
518 at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */
519 at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */
520
521 /* Enable SPI chip-selects */
522 for (i = 0; i < nr_devices; i++) {
523 if (devices[i].controller_data)
524 cs_pin = (unsigned long) devices[i].controller_data;
525 else
526 cs_pin = spi_standard_cs[devices[i].chip_select];
527
528#ifdef CONFIG_SPI_AT91_MANUAL_CS
529 at91_set_gpio_output(cs_pin, 1);
530#else
531 at91_set_A_periph(cs_pin, 0);
532#endif
533
534 /* pass chip-select pin to driver */
535 devices[i].controller_data = (void *) cs_pin;
536 }
537
538 spi_register_board_info(devices, nr_devices);
539 at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
540 platform_device_register(&at91rm9200_spi_device);
541}
542#else
543void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
544#endif
545
546
547/* --------------------------------------------------------------------
548 * RTC
549 * -------------------------------------------------------------------- */
550
551#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
552static struct platform_device at91rm9200_rtc_device = {
553 .name = "at91_rtc",
554 .id = -1,
555 .num_resources = 0,
556};
557
558static void __init at91_add_device_rtc(void)
559{
560 platform_device_register(&at91rm9200_rtc_device);
561}
562#else
563static void __init at91_add_device_rtc(void) {}
564#endif
565
566
567/* --------------------------------------------------------------------
568 * Watchdog
569 * -------------------------------------------------------------------- */
570
571#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
572static struct platform_device at91rm9200_wdt_device = {
573 .name = "at91_wdt",
574 .id = -1,
575 .num_resources = 0,
576};
577
578static void __init at91_add_device_watchdog(void)
579{
580 platform_device_register(&at91rm9200_wdt_device);
581}
582#else
583static void __init at91_add_device_watchdog(void) {}
584#endif
585
586
587/* --------------------------------------------------------------------
588 * LEDs
589 * -------------------------------------------------------------------- */
590
591#if defined(CONFIG_LEDS)
592u8 at91_leds_cpu;
593u8 at91_leds_timer;
594
595void __init at91_init_leds(u8 cpu_led, u8 timer_led)
596{
597 at91_leds_cpu = cpu_led;
598 at91_leds_timer = timer_led;
599}
600#else
601void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
602#endif
603
604
605/* --------------------------------------------------------------------
606 * UART
607 * -------------------------------------------------------------------- */
608
609#if defined(CONFIG_SERIAL_ATMEL)
610static struct resource dbgu_resources[] = {
611 [0] = {
612 .start = AT91_VA_BASE_SYS + AT91_DBGU,
613 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
614 .flags = IORESOURCE_MEM,
615 },
616 [1] = {
617 .start = AT91_ID_SYS,
618 .end = AT91_ID_SYS,
619 .flags = IORESOURCE_IRQ,
620 },
621};
622
623static struct atmel_uart_data dbgu_data = {
624 .use_dma_tx = 0,
625 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
626 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
627};
628
629static struct platform_device at91rm9200_dbgu_device = {
630 .name = "atmel_usart",
631 .id = 0,
632 .dev = {
633 .platform_data = &dbgu_data,
634 .coherent_dma_mask = 0xffffffff,
635 },
636 .resource = dbgu_resources,
637 .num_resources = ARRAY_SIZE(dbgu_resources),
638};
639
640static inline void configure_dbgu_pins(void)
641{
642 at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */
643 at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */
644}
645
646static struct resource uart0_resources[] = {
647 [0] = {
648 .start = AT91RM9200_BASE_US0,
649 .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
650 .flags = IORESOURCE_MEM,
651 },
652 [1] = {
653 .start = AT91RM9200_ID_US0,
654 .end = AT91RM9200_ID_US0,
655 .flags = IORESOURCE_IRQ,
656 },
657};
658
659static struct atmel_uart_data uart0_data = {
660 .use_dma_tx = 1,
661 .use_dma_rx = 1,
662};
663
664static struct platform_device at91rm9200_uart0_device = {
665 .name = "atmel_usart",
666 .id = 1,
667 .dev = {
668 .platform_data = &uart0_data,
669 .coherent_dma_mask = 0xffffffff,
670 },
671 .resource = uart0_resources,
672 .num_resources = ARRAY_SIZE(uart0_resources),
673};
674
675static inline void configure_usart0_pins(void)
676{
677 at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
678 at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
679 at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
680
681 /*
682 * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
683 * We need to drive the pin manually. Default is off (RTS is active low).
684 */
685 at91_set_gpio_output(AT91_PIN_PA21, 1);
686}
687
688static struct resource uart1_resources[] = {
689 [0] = {
690 .start = AT91RM9200_BASE_US1,
691 .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
692 .flags = IORESOURCE_MEM,
693 },
694 [1] = {
695 .start = AT91RM9200_ID_US1,
696 .end = AT91RM9200_ID_US1,
697 .flags = IORESOURCE_IRQ,
698 },
699};
700
701static struct atmel_uart_data uart1_data = {
702 .use_dma_tx = 1,
703 .use_dma_rx = 1,
704};
705
706static struct platform_device at91rm9200_uart1_device = {
707 .name = "atmel_usart",
708 .id = 2,
709 .dev = {
710 .platform_data = &uart1_data,
711 .coherent_dma_mask = 0xffffffff,
712 },
713 .resource = uart1_resources,
714 .num_resources = ARRAY_SIZE(uart1_resources),
715};
716
717static inline void configure_usart1_pins(void)
718{
719 at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
720 at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
721 at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
722 at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
723 at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
724 at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
725 at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
726 at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
727}
728
729static struct resource uart2_resources[] = {
730 [0] = {
731 .start = AT91RM9200_BASE_US2,
732 .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
733 .flags = IORESOURCE_MEM,
734 },
735 [1] = {
736 .start = AT91RM9200_ID_US2,
737 .end = AT91RM9200_ID_US2,
738 .flags = IORESOURCE_IRQ,
739 },
740};
741
742static struct atmel_uart_data uart2_data = {
743 .use_dma_tx = 1,
744 .use_dma_rx = 1,
745};
746
747static struct platform_device at91rm9200_uart2_device = {
748 .name = "atmel_usart",
749 .id = 3,
750 .dev = {
751 .platform_data = &uart2_data,
752 .coherent_dma_mask = 0xffffffff,
753 },
754 .resource = uart2_resources,
755 .num_resources = ARRAY_SIZE(uart2_resources),
756};
757
758static inline void configure_usart2_pins(void)
759{
760 at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
761 at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
762}
763
764static struct resource uart3_resources[] = {
765 [0] = {
766 .start = AT91RM9200_BASE_US3,
767 .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
768 .flags = IORESOURCE_MEM,
769 },
770 [1] = {
771 .start = AT91RM9200_ID_US3,
772 .end = AT91RM9200_ID_US3,
773 .flags = IORESOURCE_IRQ,
774 },
775};
776
777static struct atmel_uart_data uart3_data = {
778 .use_dma_tx = 1,
779 .use_dma_rx = 1,
780};
781
782static struct platform_device at91rm9200_uart3_device = {
783 .name = "atmel_usart",
784 .id = 4,
785 .dev = {
786 .platform_data = &uart3_data,
787 .coherent_dma_mask = 0xffffffff,
788 },
789 .resource = uart3_resources,
790 .num_resources = ARRAY_SIZE(uart3_resources),
791};
792
793static inline void configure_usart3_pins(void)
794{
795 at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
796 at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
797}
798
799struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
800struct platform_device *atmel_default_console_device; /* the serial console device */
801
802void __init at91_init_serial(struct at91_uart_config *config)
803{
804 int i;
805
806 /* Fill in list of supported UARTs */
807 for (i = 0; i < config->nr_tty; i++) {
808 switch (config->tty_map[i]) {
809 case 0:
810 configure_usart0_pins();
811 at91_uarts[i] = &at91rm9200_uart0_device;
812 at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
813 break;
814 case 1:
815 configure_usart1_pins();
816 at91_uarts[i] = &at91rm9200_uart1_device;
817 at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
818 break;
819 case 2:
820 configure_usart2_pins();
821 at91_uarts[i] = &at91rm9200_uart2_device;
822 at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
823 break;
824 case 3:
825 configure_usart3_pins();
826 at91_uarts[i] = &at91rm9200_uart3_device;
827 at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
828 break;
829 case 4:
830 configure_dbgu_pins();
831 at91_uarts[i] = &at91rm9200_dbgu_device;
832 at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
833 break;
834 default:
835 continue;
836 }
837 at91_uarts[i]->id = i; /* update ID number to mapped ID */
838 }
839
840 /* Set serial console device */
841 if (config->console_tty < ATMEL_MAX_UART)
842 atmel_default_console_device = at91_uarts[config->console_tty];
843 if (!atmel_default_console_device)
844 printk(KERN_INFO "AT91: No default serial console defined.\n");
845}
846
847void __init at91_add_device_serial(void)
848{
849 int i;
850
851 for (i = 0; i < ATMEL_MAX_UART; i++) {
852 if (at91_uarts[i])
853 platform_device_register(at91_uarts[i]);
854 }
855}
856#else
857void __init at91_init_serial(struct at91_uart_config *config) {}
858void __init at91_add_device_serial(void) {}
859#endif
860
861
862/* -------------------------------------------------------------------- */
863
864/*
865 * These devices are always present and don't need any board-specific
866 * setup.
867 */
868static int __init at91_add_standard_devices(void)
869{
870 at91_add_device_rtc();
871 at91_add_device_watchdog();
872 return 0;
873}
874
875arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
new file mode 100644
index 000000000000..949199a244c7
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -0,0 +1,146 @@
1/*
2 * linux/arch/arm/mach-at91/at91rm9200_time.c
3 *
4 * Copyright (C) 2003 SAN People
5 * Copyright (C) 2003 ATMEL
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/init.h>
23#include <linux/interrupt.h>
24#include <linux/irq.h>
25#include <linux/kernel.h>
26#include <linux/sched.h>
27#include <linux/time.h>
28
29#include <asm/hardware.h>
30#include <asm/io.h>
31#include <asm/mach/time.h>
32
33#include <asm/arch/at91_st.h>
34
35static unsigned long last_crtr;
36
37/*
38 * The ST_CRTR is updated asynchronously to the master clock. It is therefore
39 * necessary to read it twice (with the same value) to ensure accuracy.
40 */
41static inline unsigned long read_CRTR(void) {
42 unsigned long x1, x2;
43
44 do {
45 x1 = at91_sys_read(AT91_ST_CRTR);
46 x2 = at91_sys_read(AT91_ST_CRTR);
47 } while (x1 != x2);
48
49 return x1;
50}
51
52/*
53 * Returns number of microseconds since last timer interrupt. Note that interrupts
54 * will have been disabled by do_gettimeofday()
55 * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
56 * 'tick' is usecs per jiffy (linux/timex.h).
57 */
58static unsigned long at91rm9200_gettimeoffset(void)
59{
60 unsigned long elapsed;
61
62 elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
63
64 return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
65}
66
67/*
68 * IRQ handler for the timer.
69 */
70static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
71{
72 if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
73 write_seqlock(&xtime_lock);
74
75 while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
76 timer_tick();
77 last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
78 }
79
80 write_sequnlock(&xtime_lock);
81
82 return IRQ_HANDLED;
83 }
84 else
85 return IRQ_NONE; /* not handled */
86}
87
88static struct irqaction at91rm9200_timer_irq = {
89 .name = "at91_tick",
90 .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
91 .handler = at91rm9200_timer_interrupt
92};
93
94void at91rm9200_timer_reset(void)
95{
96 last_crtr = 0;
97
98 /* Real time counter incremented every 30.51758 microseconds */
99 at91_sys_write(AT91_ST_RTMR, 1);
100
101 /* Set Period Interval timer */
102 at91_sys_write(AT91_ST_PIMR, LATCH);
103
104 /* Clear any pending interrupts */
105 (void) at91_sys_read(AT91_ST_SR);
106
107 /* Enable Period Interval Timer interrupt */
108 at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
109}
110
111/*
112 * Set up timer interrupt.
113 */
114void __init at91rm9200_timer_init(void)
115{
116 /* Disable all timer interrupts */
117 at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
118 (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */
119
120 /* Make IRQs happen for the system timer */
121 setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
122
123 /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
124 tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
125
126 /* Initialize and enable the timer interrupt */
127 at91rm9200_timer_reset();
128}
129
130#ifdef CONFIG_PM
131static void at91rm9200_timer_suspend(void)
132{
133 /* disable Period Interval Timer interrupt */
134 at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
135}
136#else
137#define at91rm9200_timer_suspend NULL
138#endif
139
140struct sys_timer at91rm9200_timer = {
141 .init = at91rm9200_timer_init,
142 .offset = at91rm9200_gettimeoffset,
143 .suspend = at91rm9200_timer_suspend,
144 .resume = at91rm9200_timer_reset,
145};
146
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
new file mode 100644
index 000000000000..ffc4c0944740
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -0,0 +1,295 @@
1/*
2 * arch/arm/mach-at91/at91sam9260.c
3 *
4 * Copyright (C) 2006 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 */
12
13#include <linux/module.h>
14
15#include <asm/mach/arch.h>
16#include <asm/mach/map.h>
17#include <asm/arch/at91sam9260.h>
18#include <asm/arch/at91_pmc.h>
19#include <asm/arch/at91_rstc.h>
20
21#include "generic.h"
22#include "clock.h"
23
24static struct map_desc at91sam9260_io_desc[] __initdata = {
25 {
26 .virtual = AT91_VA_BASE_SYS,
27 .pfn = __phys_to_pfn(AT91_BASE_SYS),
28 .length = SZ_16K,
29 .type = MT_DEVICE,
30 }, {
31 .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
32 .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
33 .length = AT91SAM9260_SRAM0_SIZE,
34 .type = MT_DEVICE,
35 }, {
36 .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
37 .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
38 .length = AT91SAM9260_SRAM1_SIZE,
39 .type = MT_DEVICE,
40 },
41};
42
43/* --------------------------------------------------------------------
44 * Clocks
45 * -------------------------------------------------------------------- */
46
47/*
48 * The peripheral clocks.
49 */
50static struct clk pioA_clk = {
51 .name = "pioA_clk",
52 .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
53 .type = CLK_TYPE_PERIPHERAL,
54};
55static struct clk pioB_clk = {
56 .name = "pioB_clk",
57 .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
58 .type = CLK_TYPE_PERIPHERAL,
59};
60static struct clk pioC_clk = {
61 .name = "pioC_clk",
62 .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
63 .type = CLK_TYPE_PERIPHERAL,
64};
65static struct clk adc_clk = {
66 .name = "adc_clk",
67 .pmc_mask = 1 << AT91SAM9260_ID_ADC,
68 .type = CLK_TYPE_PERIPHERAL,
69};
70static struct clk usart0_clk = {
71 .name = "usart0_clk",
72 .pmc_mask = 1 << AT91SAM9260_ID_US0,
73 .type = CLK_TYPE_PERIPHERAL,
74};
75static struct clk usart1_clk = {
76 .name = "usart1_clk",
77 .pmc_mask = 1 << AT91SAM9260_ID_US1,
78 .type = CLK_TYPE_PERIPHERAL,
79};
80static struct clk usart2_clk = {
81 .name = "usart2_clk",
82 .pmc_mask = 1 << AT91SAM9260_ID_US2,
83 .type = CLK_TYPE_PERIPHERAL,
84};
85static struct clk mmc_clk = {
86 .name = "mci_clk",
87 .pmc_mask = 1 << AT91SAM9260_ID_MCI,
88 .type = CLK_TYPE_PERIPHERAL,
89};
90static struct clk udc_clk = {
91 .name = "udc_clk",
92 .pmc_mask = 1 << AT91SAM9260_ID_UDP,
93 .type = CLK_TYPE_PERIPHERAL,
94};
95static struct clk twi_clk = {
96 .name = "twi_clk",
97 .pmc_mask = 1 << AT91SAM9260_ID_TWI,
98 .type = CLK_TYPE_PERIPHERAL,
99};
100static struct clk spi0_clk = {
101 .name = "spi0_clk",
102 .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
103 .type = CLK_TYPE_PERIPHERAL,
104};
105static struct clk spi1_clk = {
106 .name = "spi1_clk",
107 .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
108 .type = CLK_TYPE_PERIPHERAL,
109};
110static struct clk ohci_clk = {
111 .name = "ohci_clk",
112 .pmc_mask = 1 << AT91SAM9260_ID_UHP,
113 .type = CLK_TYPE_PERIPHERAL,
114};
115static struct clk ether_clk = {
116 .name = "ether_clk",
117 .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
118 .type = CLK_TYPE_PERIPHERAL,
119};
120static struct clk isi_clk = {
121 .name = "isi_clk",
122 .pmc_mask = 1 << AT91SAM9260_ID_ISI,
123 .type = CLK_TYPE_PERIPHERAL,
124};
125static struct clk usart3_clk = {
126 .name = "usart3_clk",
127 .pmc_mask = 1 << AT91SAM9260_ID_US3,
128 .type = CLK_TYPE_PERIPHERAL,
129};
130static struct clk usart4_clk = {
131 .name = "usart4_clk",
132 .pmc_mask = 1 << AT91SAM9260_ID_US4,
133 .type = CLK_TYPE_PERIPHERAL,
134};
135static struct clk usart5_clk = {
136 .name = "usart5_clk",
137 .pmc_mask = 1 << AT91SAM9260_ID_US5,
138 .type = CLK_TYPE_PERIPHERAL,
139};
140
141static struct clk *periph_clocks[] __initdata = {
142 &pioA_clk,
143 &pioB_clk,
144 &pioC_clk,
145 &adc_clk,
146 &usart0_clk,
147 &usart1_clk,
148 &usart2_clk,
149 &mmc_clk,
150 &udc_clk,
151 &twi_clk,
152 &spi0_clk,
153 &spi1_clk,
154 // ssc
155 // tc0 .. tc2
156 &ohci_clk,
157 &ether_clk,
158 &isi_clk,
159 &usart3_clk,
160 &usart4_clk,
161 &usart5_clk,
162 // tc3 .. tc5
163 // irq0 .. irq2
164};
165
166/*
167 * The two programmable clocks.
168 * You must configure pin multiplexing to bring these signals out.
169 */
170static struct clk pck0 = {
171 .name = "pck0",
172 .pmc_mask = AT91_PMC_PCK0,
173 .type = CLK_TYPE_PROGRAMMABLE,
174 .id = 0,
175};
176static struct clk pck1 = {
177 .name = "pck1",
178 .pmc_mask = AT91_PMC_PCK1,
179 .type = CLK_TYPE_PROGRAMMABLE,
180 .id = 1,
181};
182
183static void __init at91sam9260_register_clocks(void)
184{
185 int i;
186
187 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
188 clk_register(periph_clocks[i]);
189
190 clk_register(&pck0);
191 clk_register(&pck1);
192}
193
194/* --------------------------------------------------------------------
195 * GPIO
196 * -------------------------------------------------------------------- */
197
198static struct at91_gpio_bank at91sam9260_gpio[] = {
199 {
200 .id = AT91SAM9260_ID_PIOA,
201 .offset = AT91_PIOA,
202 .clock = &pioA_clk,
203 }, {
204 .id = AT91SAM9260_ID_PIOB,
205 .offset = AT91_PIOB,
206 .clock = &pioB_clk,
207 }, {
208 .id = AT91SAM9260_ID_PIOC,
209 .offset = AT91_PIOC,
210 .clock = &pioC_clk,
211 }
212};
213
214static void at91sam9260_reset(void)
215{
216 at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
217}
218
219
220/* --------------------------------------------------------------------
221 * AT91SAM9260 processor initialization
222 * -------------------------------------------------------------------- */
223
224void __init at91sam9260_initialize(unsigned long main_clock)
225{
226 /* Map peripherals */
227 iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
228
229 at91_arch_reset = at91sam9260_reset;
230 at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
231 | (1 << AT91SAM9260_ID_IRQ2);
232
233 /* Init clock subsystem */
234 at91_clock_init(main_clock);
235
236 /* Register the processor-specific clocks */
237 at91sam9260_register_clocks();
238
239 /* Register GPIO subsystem */
240 at91_gpio_init(at91sam9260_gpio, 3);
241}
242
243/* --------------------------------------------------------------------
244 * Interrupt initialization
245 * -------------------------------------------------------------------- */
246
247/*
248 * The default interrupt priority levels (0 = lowest, 7 = highest).
249 */
250static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
251 7, /* Advanced Interrupt Controller */
252 7, /* System Peripherals */
253 0, /* Parallel IO Controller A */
254 0, /* Parallel IO Controller B */
255 0, /* Parallel IO Controller C */
256 0, /* Analog-to-Digital Converter */
257 6, /* USART 0 */
258 6, /* USART 1 */
259 6, /* USART 2 */
260 0, /* Multimedia Card Interface */
261 4, /* USB Device Port */
262 0, /* Two-Wire Interface */
263 6, /* Serial Peripheral Interface 0 */
264 6, /* Serial Peripheral Interface 1 */
265 5, /* Serial Synchronous Controller */
266 0,
267 0,
268 0, /* Timer Counter 0 */
269 0, /* Timer Counter 1 */
270 0, /* Timer Counter 2 */
271 3, /* USB Host port */
272 3, /* Ethernet */
273 0, /* Image Sensor Interface */
274 6, /* USART 3 */
275 6, /* USART 4 */
276 6, /* USART 5 */
277 0, /* Timer Counter 3 */
278 0, /* Timer Counter 4 */
279 0, /* Timer Counter 5 */
280 0, /* Advanced Interrupt Controller */
281 0, /* Advanced Interrupt Controller */
282 0, /* Advanced Interrupt Controller */
283};
284
285void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
286{
287 if (!priority)
288 priority = at91sam9260_default_irq_priority;
289
290 /* Initialize the AIC interrupt controller */
291 at91_aic_init(priority);
292
293 /* Enable GPIO interrupts */
294 at91_gpio_irq_setup();
295}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
new file mode 100644
index 000000000000..4adff70b9ba0
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -0,0 +1,867 @@
1/*
2 * arch/arm/mach-at91/at91sam9260_devices.c
3 *
4 * Copyright (C) 2006 Atmel
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 */
12#include <asm/mach/arch.h>
13#include <asm/mach/map.h>
14
15#include <linux/platform_device.h>
16
17#include <asm/arch/board.h>
18#include <asm/arch/gpio.h>
19#include <asm/arch/at91sam9260.h>
20#include <asm/arch/at91sam926x_mc.h>
21#include <asm/arch/at91sam9260_matrix.h>
22
23#include "generic.h"
24
25#define SZ_512 0x00000200
26#define SZ_256 0x00000100
27#define SZ_16 0x00000010
28
29/* --------------------------------------------------------------------
30 * USB Host
31 * -------------------------------------------------------------------- */
32
33#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
34static u64 ohci_dmamask = 0xffffffffUL;
35static struct at91_usbh_data usbh_data;
36
37static struct resource usbh_resources[] = {
38 [0] = {
39 .start = AT91SAM9260_UHP_BASE,
40 .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
41 .flags = IORESOURCE_MEM,
42 },
43 [1] = {
44 .start = AT91SAM9260_ID_UHP,
45 .end = AT91SAM9260_ID_UHP,
46 .flags = IORESOURCE_IRQ,
47 },
48};
49
50static struct platform_device at91_usbh_device = {
51 .name = "at91_ohci",
52 .id = -1,
53 .dev = {
54 .dma_mask = &ohci_dmamask,
55 .coherent_dma_mask = 0xffffffff,
56 .platform_data = &usbh_data,
57 },
58 .resource = usbh_resources,
59 .num_resources = ARRAY_SIZE(usbh_resources),
60};
61
62void __init at91_add_device_usbh(struct at91_usbh_data *data)
63{
64 if (!data)
65 return;
66
67 usbh_data = *data;
68 platform_device_register(&at91_usbh_device);
69}
70#else
71void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
72#endif
73
74
75/* --------------------------------------------------------------------
76 * USB Device (Gadget)
77 * -------------------------------------------------------------------- */
78
79#ifdef CONFIG_USB_GADGET_AT91
80static struct at91_udc_data udc_data;
81
82static struct resource udc_resources[] = {
83 [0] = {
84 .start = AT91SAM9260_BASE_UDP,
85 .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
86 .flags = IORESOURCE_MEM,
87 },
88 [1] = {
89 .start = AT91SAM9260_ID_UDP,
90 .end = AT91SAM9260_ID_UDP,
91 .flags = IORESOURCE_IRQ,
92 },
93};
94
95static struct platform_device at91_udc_device = {
96 .name = "at91_udc",
97 .id = -1,
98 .dev = {
99 .platform_data = &udc_data,
100 },
101 .resource = udc_resources,
102 .num_resources = ARRAY_SIZE(udc_resources),
103};
104
105void __init at91_add_device_udc(struct at91_udc_data *data)
106{
107 if (!data)
108 return;
109
110 if (data->vbus_pin) {
111 at91_set_gpio_input(data->vbus_pin, 0);
112 at91_set_deglitch(data->vbus_pin, 1);
113 }
114
115 /* Pullup pin is handled internally by USB device peripheral */
116
117 udc_data = *data;
118 platform_device_register(&at91_udc_device);
119}
120#else
121void __init at91_add_device_udc(struct at91_udc_data *data) {}
122#endif
123
124
125/* --------------------------------------------------------------------
126 * Ethernet
127 * -------------------------------------------------------------------- */
128
129#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
130static u64 eth_dmamask = 0xffffffffUL;
131static struct at91_eth_data eth_data;
132
133static struct resource eth_resources[] = {
134 [0] = {
135 .start = AT91SAM9260_BASE_EMAC,
136 .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
137 .flags = IORESOURCE_MEM,
138 },
139 [1] = {
140 .start = AT91SAM9260_ID_EMAC,
141 .end = AT91SAM9260_ID_EMAC,
142 .flags = IORESOURCE_IRQ,
143 },
144};
145
146static struct platform_device at91sam9260_eth_device = {
147 .name = "macb",
148 .id = -1,
149 .dev = {
150 .dma_mask = &eth_dmamask,
151 .coherent_dma_mask = 0xffffffff,
152 .platform_data = &eth_data,
153 },
154 .resource = eth_resources,
155 .num_resources = ARRAY_SIZE(eth_resources),
156};
157
158void __init at91_add_device_eth(struct at91_eth_data *data)
159{
160 if (!data)
161 return;
162
163 if (data->phy_irq_pin) {
164 at91_set_gpio_input(data->phy_irq_pin, 0);
165 at91_set_deglitch(data->phy_irq_pin, 1);
166 }
167
168 /* Pins used for MII and RMII */
169 at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
170 at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
171 at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
172 at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
173 at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
174 at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
175 at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
176 at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
177 at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
178 at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
179
180 if (!data->is_rmii) {
181 at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
182 at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
183 at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
184 at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
185 at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
186 at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
187 at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
188 at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
189 }
190
191 eth_data = *data;
192 platform_device_register(&at91sam9260_eth_device);
193}
194#else
195void __init at91_add_device_eth(struct at91_eth_data *data) {}
196#endif
197
198
199/* --------------------------------------------------------------------
200 * MMC / SD
201 * -------------------------------------------------------------------- */
202
203#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
204static u64 mmc_dmamask = 0xffffffffUL;
205static struct at91_mmc_data mmc_data;
206
207static struct resource mmc_resources[] = {
208 [0] = {
209 .start = AT91SAM9260_BASE_MCI,
210 .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
211 .flags = IORESOURCE_MEM,
212 },
213 [1] = {
214 .start = AT91SAM9260_ID_MCI,
215 .end = AT91SAM9260_ID_MCI,
216 .flags = IORESOURCE_IRQ,
217 },
218};
219
220static struct platform_device at91sam9260_mmc_device = {
221 .name = "at91_mci",
222 .id = -1,
223 .dev = {
224 .dma_mask = &mmc_dmamask,
225 .coherent_dma_mask = 0xffffffff,
226 .platform_data = &mmc_data,
227 },
228 .resource = mmc_resources,
229 .num_resources = ARRAY_SIZE(mmc_resources),
230};
231
232void __init at91_add_device_mmc(struct at91_mmc_data *data)
233{
234 if (!data)
235 return;
236
237 /* input/irq */
238 if (data->det_pin) {
239 at91_set_gpio_input(data->det_pin, 1);
240 at91_set_deglitch(data->det_pin, 1);
241 }
242 if (data->wp_pin)
243 at91_set_gpio_input(data->wp_pin, 1);
244 if (data->vcc_pin)
245 at91_set_gpio_output(data->vcc_pin, 0);
246
247 /* CLK */
248 at91_set_A_periph(AT91_PIN_PA8, 0);
249
250 if (data->slot_b) {
251 /* CMD */
252 at91_set_B_periph(AT91_PIN_PA1, 1);
253
254 /* DAT0, maybe DAT1..DAT3 */
255 at91_set_B_periph(AT91_PIN_PA0, 1);
256 if (data->wire4) {
257 at91_set_B_periph(AT91_PIN_PA5, 1);
258 at91_set_B_periph(AT91_PIN_PA4, 1);
259 at91_set_B_periph(AT91_PIN_PA3, 1);
260 }
261 } else {
262 /* CMD */
263 at91_set_A_periph(AT91_PIN_PA7, 1);
264
265 /* DAT0, maybe DAT1..DAT3 */
266 at91_set_A_periph(AT91_PIN_PA6, 1);
267 if (data->wire4) {
268 at91_set_A_periph(AT91_PIN_PA9, 1);
269 at91_set_A_periph(AT91_PIN_PA10, 1);
270 at91_set_A_periph(AT91_PIN_PA11, 1);
271 }
272 }
273
274 mmc_data = *data;
275 platform_device_register(&at91sam9260_mmc_device);
276}
277#else
278void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
279#endif
280
281
282/* --------------------------------------------------------------------
283 * NAND / SmartMedia
284 * -------------------------------------------------------------------- */
285
286#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
287static struct at91_nand_data nand_data;
288
289#define NAND_BASE AT91_CHIPSELECT_3
290
291static struct resource nand_resources[] = {
292 {
293 .start = NAND_BASE,
294 .end = NAND_BASE + SZ_8M - 1,
295 .flags = IORESOURCE_MEM,
296 }
297};
298
299static struct platform_device at91sam9260_nand_device = {
300 .name = "at91_nand",
301 .id = -1,
302 .dev = {
303 .platform_data = &nand_data,
304 },
305 .resource = nand_resources,
306 .num_resources = ARRAY_SIZE(nand_resources),
307};
308
309void __init at91_add_device_nand(struct at91_nand_data *data)
310{
311 unsigned long csa, mode;
312
313 if (!data)
314 return;
315
316 csa = at91_sys_read(AT91_MATRIX_EBICSA);
317 at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
318
319 /* set the bus interface characteristics */
320 at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
321 | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
322
323 at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
324 | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
325
326 at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
327
328 if (data->bus_width_16)
329 mode = AT91_SMC_DBW_16;
330 else
331 mode = AT91_SMC_DBW_8;
332 at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
333
334 /* enable pin */
335 if (data->enable_pin)
336 at91_set_gpio_output(data->enable_pin, 1);
337
338 /* ready/busy pin */
339 if (data->rdy_pin)
340 at91_set_gpio_input(data->rdy_pin, 1);
341
342 /* card detect pin */
343 if (data->det_pin)
344 at91_set_gpio_input(data->det_pin, 1);
345
346 nand_data = *data;
347 platform_device_register(&at91sam9260_nand_device);
348}
349#else
350void __init at91_add_device_nand(struct at91_nand_data *data) {}
351#endif
352
353
354/* --------------------------------------------------------------------
355 * TWI (i2c)
356 * -------------------------------------------------------------------- */
357
358#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
359
360static struct resource twi_resources[] = {
361 [0] = {
362 .start = AT91SAM9260_BASE_TWI,
363 .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
364 .flags = IORESOURCE_MEM,
365 },
366 [1] = {
367 .start = AT91SAM9260_ID_TWI,
368 .end = AT91SAM9260_ID_TWI,
369 .flags = IORESOURCE_IRQ,
370 },
371};
372
373static struct platform_device at91sam9260_twi_device = {
374 .name = "at91_i2c",
375 .id = -1,
376 .resource = twi_resources,
377 .num_resources = ARRAY_SIZE(twi_resources),
378};
379
380void __init at91_add_device_i2c(void)
381{
382 /* pins used for TWI interface */
383 at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
384 at91_set_multi_drive(AT91_PIN_PA23, 1);
385
386 at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
387 at91_set_multi_drive(AT91_PIN_PA24, 1);
388
389 platform_device_register(&at91sam9260_twi_device);
390}
391#else
392void __init at91_add_device_i2c(void) {}
393#endif
394
395
396/* --------------------------------------------------------------------
397 * SPI
398 * -------------------------------------------------------------------- */
399
400#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
401static u64 spi_dmamask = 0xffffffffUL;
402
403static struct resource spi0_resources[] = {
404 [0] = {
405 .start = AT91SAM9260_BASE_SPI0,
406 .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
407 .flags = IORESOURCE_MEM,
408 },
409 [1] = {
410 .start = AT91SAM9260_ID_SPI0,
411 .end = AT91SAM9260_ID_SPI0,
412 .flags = IORESOURCE_IRQ,
413 },
414};
415
416static struct platform_device at91sam9260_spi0_device = {
417 .name = "atmel_spi",
418 .id = 0,
419 .dev = {
420 .dma_mask = &spi_dmamask,
421 .coherent_dma_mask = 0xffffffff,
422 },
423 .resource = spi0_resources,
424 .num_resources = ARRAY_SIZE(spi0_resources),
425};
426
427static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
428
429static struct resource spi1_resources[] = {
430 [0] = {
431 .start = AT91SAM9260_BASE_SPI1,
432 .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
433 .flags = IORESOURCE_MEM,
434 },
435 [1] = {
436 .start = AT91SAM9260_ID_SPI1,
437 .end = AT91SAM9260_ID_SPI1,
438 .flags = IORESOURCE_IRQ,
439 },
440};
441
442static struct platform_device at91sam9260_spi1_device = {
443 .name = "atmel_spi",
444 .id = 1,
445 .dev = {
446 .dma_mask = &spi_dmamask,
447 .coherent_dma_mask = 0xffffffff,
448 },
449 .resource = spi1_resources,
450 .num_resources = ARRAY_SIZE(spi1_resources),
451};
452
453static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
454
455void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
456{
457 int i;
458 unsigned long cs_pin;
459 short enable_spi0 = 0;
460 short enable_spi1 = 0;
461
462 /* Choose SPI chip-selects */
463 for (i = 0; i < nr_devices; i++) {
464 if (devices[i].controller_data)
465 cs_pin = (unsigned long) devices[i].controller_data;
466 else if (devices[i].bus_num == 0)
467 cs_pin = spi0_standard_cs[devices[i].chip_select];
468 else
469 cs_pin = spi1_standard_cs[devices[i].chip_select];
470
471 if (devices[i].bus_num == 0)
472 enable_spi0 = 1;
473 else
474 enable_spi1 = 1;
475
476 /* enable chip-select pin */
477 at91_set_gpio_output(cs_pin, 1);
478
479 /* pass chip-select pin to driver */
480 devices[i].controller_data = (void *) cs_pin;
481 }
482
483 spi_register_board_info(devices, nr_devices);
484
485 /* Configure SPI bus(es) */
486 if (enable_spi0) {
487 at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
488 at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
489 at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
490
491 at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
492 platform_device_register(&at91sam9260_spi0_device);
493 }
494 if (enable_spi1) {
495 at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
496 at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
497 at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
498
499 at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
500 platform_device_register(&at91sam9260_spi1_device);
501 }
502}
503#else
504void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
505#endif
506
507
508/* --------------------------------------------------------------------
509 * LEDs
510 * -------------------------------------------------------------------- */
511
512#if defined(CONFIG_LEDS)
513u8 at91_leds_cpu;
514u8 at91_leds_timer;
515
516void __init at91_init_leds(u8 cpu_led, u8 timer_led)
517{
518 at91_leds_cpu = cpu_led;
519 at91_leds_timer = timer_led;
520}
521#else
522void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
523#endif
524
525
526/* --------------------------------------------------------------------
527 * UART
528 * -------------------------------------------------------------------- */
529#if defined(CONFIG_SERIAL_ATMEL)
530static struct resource dbgu_resources[] = {
531 [0] = {
532 .start = AT91_VA_BASE_SYS + AT91_DBGU,
533 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
534 .flags = IORESOURCE_MEM,
535 },
536 [1] = {
537 .start = AT91_ID_SYS,
538 .end = AT91_ID_SYS,
539 .flags = IORESOURCE_IRQ,
540 },
541};
542
543static struct atmel_uart_data dbgu_data = {
544 .use_dma_tx = 0,
545 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
546 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
547};
548
549static struct platform_device at91sam9260_dbgu_device = {
550 .name = "atmel_usart",
551 .id = 0,
552 .dev = {
553 .platform_data = &dbgu_data,
554 .coherent_dma_mask = 0xffffffff,
555 },
556 .resource = dbgu_resources,
557 .num_resources = ARRAY_SIZE(dbgu_resources),
558};
559
560static inline void configure_dbgu_pins(void)
561{
562 at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
563 at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
564}
565
566static struct resource uart0_resources[] = {
567 [0] = {
568 .start = AT91SAM9260_BASE_US0,
569 .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
570 .flags = IORESOURCE_MEM,
571 },
572 [1] = {
573 .start = AT91SAM9260_ID_US0,
574 .end = AT91SAM9260_ID_US0,
575 .flags = IORESOURCE_IRQ,
576 },
577};
578
579static struct atmel_uart_data uart0_data = {
580 .use_dma_tx = 1,
581 .use_dma_rx = 1,
582};
583
584static struct platform_device at91sam9260_uart0_device = {
585 .name = "atmel_usart",
586 .id = 1,
587 .dev = {
588 .platform_data = &uart0_data,
589 .coherent_dma_mask = 0xffffffff,
590 },
591 .resource = uart0_resources,
592 .num_resources = ARRAY_SIZE(uart0_resources),
593};
594
595static inline void configure_usart0_pins(void)
596{
597 at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
598 at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
599 at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
600 at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
601 at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
602 at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
603 at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
604 at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
605}
606
607static struct resource uart1_resources[] = {
608 [0] = {
609 .start = AT91SAM9260_BASE_US1,
610 .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
611 .flags = IORESOURCE_MEM,
612 },
613 [1] = {
614 .start = AT91SAM9260_ID_US1,
615 .end = AT91SAM9260_ID_US1,
616 .flags = IORESOURCE_IRQ,
617 },
618};
619
620static struct atmel_uart_data uart1_data = {
621 .use_dma_tx = 1,
622 .use_dma_rx = 1,
623};
624
625static struct platform_device at91sam9260_uart1_device = {
626 .name = "atmel_usart",
627 .id = 2,
628 .dev = {
629 .platform_data = &uart1_data,
630 .coherent_dma_mask = 0xffffffff,
631 },
632 .resource = uart1_resources,
633 .num_resources = ARRAY_SIZE(uart1_resources),
634};
635
636static inline void configure_usart1_pins(void)
637{
638 at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
639 at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
640 at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
641 at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
642}
643
644static struct resource uart2_resources[] = {
645 [0] = {
646 .start = AT91SAM9260_BASE_US2,
647 .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
648 .flags = IORESOURCE_MEM,
649 },
650 [1] = {
651 .start = AT91SAM9260_ID_US2,
652 .end = AT91SAM9260_ID_US2,
653 .flags = IORESOURCE_IRQ,
654 },
655};
656
657static struct atmel_uart_data uart2_data = {
658 .use_dma_tx = 1,
659 .use_dma_rx = 1,
660};
661
662static struct platform_device at91sam9260_uart2_device = {
663 .name = "atmel_usart",
664 .id = 3,
665 .dev = {
666 .platform_data = &uart2_data,
667 .coherent_dma_mask = 0xffffffff,
668 },
669 .resource = uart2_resources,
670 .num_resources = ARRAY_SIZE(uart2_resources),
671};
672
673static inline void configure_usart2_pins(void)
674{
675 at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
676 at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
677}
678
679static struct resource uart3_resources[] = {
680 [0] = {
681 .start = AT91SAM9260_BASE_US3,
682 .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
683 .flags = IORESOURCE_MEM,
684 },
685 [1] = {
686 .start = AT91SAM9260_ID_US3,
687 .end = AT91SAM9260_ID_US3,
688 .flags = IORESOURCE_IRQ,
689 },
690};
691
692static struct atmel_uart_data uart3_data = {
693 .use_dma_tx = 1,
694 .use_dma_rx = 1,
695};
696
697static struct platform_device at91sam9260_uart3_device = {
698 .name = "atmel_usart",
699 .id = 4,
700 .dev = {
701 .platform_data = &uart3_data,
702 .coherent_dma_mask = 0xffffffff,
703 },
704 .resource = uart3_resources,
705 .num_resources = ARRAY_SIZE(uart3_resources),
706};
707
708static inline void configure_usart3_pins(void)
709{
710 at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
711 at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
712}
713
714static struct resource uart4_resources[] = {
715 [0] = {
716 .start = AT91SAM9260_BASE_US4,
717 .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
718 .flags = IORESOURCE_MEM,
719 },
720 [1] = {
721 .start = AT91SAM9260_ID_US4,
722 .end = AT91SAM9260_ID_US4,
723 .flags = IORESOURCE_IRQ,
724 },
725};
726
727static struct atmel_uart_data uart4_data = {
728 .use_dma_tx = 1,
729 .use_dma_rx = 1,
730};
731
732static struct platform_device at91sam9260_uart4_device = {
733 .name = "atmel_usart",
734 .id = 5,
735 .dev = {
736 .platform_data = &uart4_data,
737 .coherent_dma_mask = 0xffffffff,
738 },
739 .resource = uart4_resources,
740 .num_resources = ARRAY_SIZE(uart4_resources),
741};
742
743static inline void configure_usart4_pins(void)
744{
745 at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
746 at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
747}
748
749static struct resource uart5_resources[] = {
750 [0] = {
751 .start = AT91SAM9260_BASE_US5,
752 .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
753 .flags = IORESOURCE_MEM,
754 },
755 [1] = {
756 .start = AT91SAM9260_ID_US5,
757 .end = AT91SAM9260_ID_US5,
758 .flags = IORESOURCE_IRQ,
759 },
760};
761
762static struct atmel_uart_data uart5_data = {
763 .use_dma_tx = 1,
764 .use_dma_rx = 1,
765};
766
767static struct platform_device at91sam9260_uart5_device = {
768 .name = "atmel_usart",
769 .id = 6,
770 .dev = {
771 .platform_data = &uart5_data,
772 .coherent_dma_mask = 0xffffffff,
773 },
774 .resource = uart5_resources,
775 .num_resources = ARRAY_SIZE(uart5_resources),
776};
777
778static inline void configure_usart5_pins(void)
779{
780 at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
781 at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
782}
783
784struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
785struct platform_device *atmel_default_console_device; /* the serial console device */
786
787void __init at91_init_serial(struct at91_uart_config *config)
788{
789 int i;
790
791 /* Fill in list of supported UARTs */
792 for (i = 0; i < config->nr_tty; i++) {
793 switch (config->tty_map[i]) {
794 case 0:
795 configure_usart0_pins();
796 at91_uarts[i] = &at91sam9260_uart0_device;
797 at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
798 break;
799 case 1:
800 configure_usart1_pins();
801 at91_uarts[i] = &at91sam9260_uart1_device;
802 at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
803 break;
804 case 2:
805 configure_usart2_pins();
806 at91_uarts[i] = &at91sam9260_uart2_device;
807 at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
808 break;
809 case 3:
810 configure_usart3_pins();
811 at91_uarts[i] = &at91sam9260_uart3_device;
812 at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
813 break;
814 case 4:
815 configure_usart4_pins();
816 at91_uarts[i] = &at91sam9260_uart4_device;
817 at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
818 break;
819 case 5:
820 configure_usart5_pins();
821 at91_uarts[i] = &at91sam9260_uart5_device;
822 at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
823 break;
824 case 6:
825 configure_dbgu_pins();
826 at91_uarts[i] = &at91sam9260_dbgu_device;
827 at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
828 break;
829 default:
830 continue;
831 }
832 at91_uarts[i]->id = i; /* update ID number to mapped ID */
833 }
834
835 /* Set serial console device */
836 if (config->console_tty < ATMEL_MAX_UART)
837 atmel_default_console_device = at91_uarts[config->console_tty];
838 if (!atmel_default_console_device)
839 printk(KERN_INFO "AT91: No default serial console defined.\n");
840}
841
842void __init at91_add_device_serial(void)
843{
844 int i;
845
846 for (i = 0; i < ATMEL_MAX_UART; i++) {
847 if (at91_uarts[i])
848 platform_device_register(at91_uarts[i]);
849 }
850}
851#else
852void __init at91_init_serial(struct at91_uart_config *config) {}
853void __init at91_add_device_serial(void) {}
854#endif
855
856
857/* -------------------------------------------------------------------- */
858/*
859 * These devices are always present and don't need any board-specific
860 * setup.
861 */
862static int __init at91_add_standard_devices(void)
863{
864 return 0;
865}
866
867arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
new file mode 100644
index 000000000000..47e02ff7e872
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -0,0 +1,290 @@
1/*
2 * arch/arm/mach-at91/at91sam9261.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 */
12
13#include <linux/module.h>
14
15#include <asm/mach/arch.h>
16#include <asm/mach/map.h>
17#include <asm/arch/at91sam9261.h>
18#include <asm/arch/at91_pmc.h>
19#include <asm/arch/at91_rstc.h>
20
21#include "generic.h"
22#include "clock.h"
23
24static struct map_desc at91sam9261_io_desc[] __initdata = {
25 {
26 .virtual = AT91_VA_BASE_SYS,
27 .pfn = __phys_to_pfn(AT91_BASE_SYS),
28 .length = SZ_16K,
29 .type = MT_DEVICE,
30 }, {
31 .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
32 .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
33 .length = AT91SAM9261_SRAM_SIZE,
34 .type = MT_DEVICE,
35 },
36};
37
38/* --------------------------------------------------------------------
39 * Clocks
40 * -------------------------------------------------------------------- */
41
42/*
43 * The peripheral clocks.
44 */
45static struct clk pioA_clk = {
46 .name = "pioA_clk",
47 .pmc_mask = 1 << AT91SAM9261_ID_PIOA,
48 .type = CLK_TYPE_PERIPHERAL,
49};
50static struct clk pioB_clk = {
51 .name = "pioB_clk",
52 .pmc_mask = 1 << AT91SAM9261_ID_PIOB,
53 .type = CLK_TYPE_PERIPHERAL,
54};
55static struct clk pioC_clk = {
56 .name = "pioC_clk",
57 .pmc_mask = 1 << AT91SAM9261_ID_PIOC,
58 .type = CLK_TYPE_PERIPHERAL,
59};
60static struct clk usart0_clk = {
61 .name = "usart0_clk",
62 .pmc_mask = 1 << AT91SAM9261_ID_US0,
63 .type = CLK_TYPE_PERIPHERAL,
64};
65static struct clk usart1_clk = {
66 .name = "usart1_clk",
67 .pmc_mask = 1 << AT91SAM9261_ID_US1,
68 .type = CLK_TYPE_PERIPHERAL,
69};
70static struct clk usart2_clk = {
71 .name = "usart2_clk",
72 .pmc_mask = 1 << AT91SAM9261_ID_US2,
73 .type = CLK_TYPE_PERIPHERAL,
74};
75static struct clk mmc_clk = {
76 .name = "mci_clk",
77 .pmc_mask = 1 << AT91SAM9261_ID_MCI,
78 .type = CLK_TYPE_PERIPHERAL,
79};
80static struct clk udc_clk = {
81 .name = "udc_clk",
82 .pmc_mask = 1 << AT91SAM9261_ID_UDP,
83 .type = CLK_TYPE_PERIPHERAL,
84};
85static struct clk twi_clk = {
86 .name = "twi_clk",
87 .pmc_mask = 1 << AT91SAM9261_ID_TWI,
88 .type = CLK_TYPE_PERIPHERAL,
89};
90static struct clk spi0_clk = {
91 .name = "spi0_clk",
92 .pmc_mask = 1 << AT91SAM9261_ID_SPI0,
93 .type = CLK_TYPE_PERIPHERAL,
94};
95static struct clk spi1_clk = {
96 .name = "spi1_clk",
97 .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
98 .type = CLK_TYPE_PERIPHERAL,
99};
100static struct clk ohci_clk = {
101 .name = "ohci_clk",
102 .pmc_mask = 1 << AT91SAM9261_ID_UHP,
103 .type = CLK_TYPE_PERIPHERAL,
104};
105static struct clk lcdc_clk = {
106 .name = "lcdc_clk",
107 .pmc_mask = 1 << AT91SAM9261_ID_LCDC,
108 .type = CLK_TYPE_PERIPHERAL,
109};
110
111static struct clk *periph_clocks[] __initdata = {
112 &pioA_clk,
113 &pioB_clk,
114 &pioC_clk,
115 &usart0_clk,
116 &usart1_clk,
117 &usart2_clk,
118 &mmc_clk,
119 &udc_clk,
120 &twi_clk,
121 &spi0_clk,
122 &spi1_clk,
123 // ssc 0 .. ssc2
124 // tc0 .. tc2
125 &ohci_clk,
126 &lcdc_clk,
127 // irq0 .. irq2
128};
129
130/*
131 * The four programmable clocks.
132 * You must configure pin multiplexing to bring these signals out.
133 */
134static struct clk pck0 = {
135 .name = "pck0",
136 .pmc_mask = AT91_PMC_PCK0,
137 .type = CLK_TYPE_PROGRAMMABLE,
138 .id = 0,
139};
140static struct clk pck1 = {
141 .name = "pck1",
142 .pmc_mask = AT91_PMC_PCK1,
143 .type = CLK_TYPE_PROGRAMMABLE,
144 .id = 1,
145};
146static struct clk pck2 = {
147 .name = "pck2",
148 .pmc_mask = AT91_PMC_PCK2,
149 .type = CLK_TYPE_PROGRAMMABLE,
150 .id = 2,
151};
152static struct clk pck3 = {
153 .name = "pck3",
154 .pmc_mask = AT91_PMC_PCK3,
155 .type = CLK_TYPE_PROGRAMMABLE,
156 .id = 3,
157};
158
159/* HClocks */
160static struct clk hck0 = {
161 .name = "hck0",
162 .pmc_mask = AT91_PMC_HCK0,
163 .type = CLK_TYPE_SYSTEM,
164 .id = 0,
165};
166static struct clk hck1 = {
167 .name = "hck1",
168 .pmc_mask = AT91_PMC_HCK1,
169 .type = CLK_TYPE_SYSTEM,
170 .id = 1,
171};
172
173static void __init at91sam9261_register_clocks(void)
174{
175 int i;
176
177 for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
178 clk_register(periph_clocks[i]);
179
180 clk_register(&pck0);
181 clk_register(&pck1);
182 clk_register(&pck2);
183 clk_register(&pck3);
184
185 clk_register(&hck0);
186 clk_register(&hck1);
187}
188
189/* --------------------------------------------------------------------
190 * GPIO
191 * -------------------------------------------------------------------- */
192
193static struct at91_gpio_bank at91sam9261_gpio[] = {
194 {
195 .id = AT91SAM9261_ID_PIOA,
196 .offset = AT91_PIOA,
197 .clock = &pioA_clk,
198 }, {
199 .id = AT91SAM9261_ID_PIOB,
200 .offset = AT91_PIOB,
201 .clock = &pioB_clk,
202 }, {
203 .id = AT91SAM9261_ID_PIOC,
204 .offset = AT91_PIOC,
205 .clock = &pioC_clk,
206 }
207};
208
209static void at91sam9261_reset(void)
210{
211 at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
212}
213
214
215/* --------------------------------------------------------------------
216 * AT91SAM9261 processor initialization
217 * -------------------------------------------------------------------- */
218
219void __init at91sam9261_initialize(unsigned long main_clock)
220{
221 /* Map peripherals */
222 iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
223
224 at91_arch_reset = at91sam9261_reset;
225 at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
226 | (1 << AT91SAM9261_ID_IRQ2);
227
228 /* Init clock subsystem */
229 at91_clock_init(main_clock);
230
231 /* Register the processor-specific clocks */
232 at91sam9261_register_clocks();
233
234 /* Register GPIO subsystem */
235 at91_gpio_init(at91sam9261_gpio, 3);
236}
237
238/* --------------------------------------------------------------------
239 * Interrupt initialization
240 * -------------------------------------------------------------------- */
241
242/*
243 * The default interrupt priority levels (0 = lowest, 7 = highest).
244 */
245static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
246 7, /* Advanced Interrupt Controller */
247 7, /* System Peripherals */
248 0, /* Parallel IO Controller A */
249 0, /* Parallel IO Controller B */
250 0, /* Parallel IO Controller C */
251 0,
252 6, /* USART 0 */
253 6, /* USART 1 */
254 6, /* USART 2 */
255 0, /* Multimedia Card Interface */
256 4, /* USB Device Port */
257 0, /* Two-Wire Interface */
258 6, /* Serial Peripheral Interface 0 */
259 6, /* Serial Peripheral Interface 1 */
260 5, /* Serial Synchronous Controller 0 */
261 5, /* Serial Synchronous Controller 1 */
262 5, /* Serial Synchronous Controller 2 */
263 0, /* Timer Counter 0 */
264 0, /* Timer Counter 1 */
265 0, /* Timer Counter 2 */
266 3, /* USB Host port */
267 3, /* LCD Controller */
268 0,
269 0,
270 0,
271 0,
272 0,
273 0,
274 0,
275 0, /* Advanced Interrupt Controller */
276 0, /* Advanced Interrupt Controller */
277 0, /* Advanced Interrupt Controller */
278};
279
280void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
281{
282 if (!priority)
283 priority = at91sam9261_default_irq_priority;
284
285 /* Initialize the AIC interrupt controller */
286 at91_aic_init(priority);
287
288 /* Enable GPIO interrupts */
289 at91_gpio_irq_setup();
290}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
new file mode 100644
index 000000000000..3249de08d1f3
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -0,0 +1,741 @@
1/*
2 * arch/arm/mach-at91/at91sam9261_devices.c
3 *
4 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
5 * Copyright (C) 2005 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 */
13#include <asm/mach/arch.h>
14#include <asm/mach/map.h>
15
16#include <linux/platform_device.h>
17
18#include <asm/arch/board.h>
19#include <asm/arch/gpio.h>
20#include <asm/arch/at91sam9261.h>
21#include <asm/arch/at91sam9261_matrix.h>
22#include <asm/arch/at91sam926x_mc.h>
23
24#include "generic.h"
25
26#define SZ_512 0x00000200
27#define SZ_256 0x00000100
28#define SZ_16 0x00000010
29
30/* --------------------------------------------------------------------
31 * USB Host
32 * -------------------------------------------------------------------- */
33
34#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
35static u64 ohci_dmamask = 0xffffffffUL;
36static struct at91_usbh_data usbh_data;
37
38static struct resource usbh_resources[] = {
39 [0] = {
40 .start = AT91SAM9261_UHP_BASE,
41 .end = AT91SAM9261_UHP_BASE + SZ_1M - 1,
42 .flags = IORESOURCE_MEM,
43 },
44 [1] = {
45 .start = AT91SAM9261_ID_UHP,
46 .end = AT91SAM9261_ID_UHP,
47 .flags = IORESOURCE_IRQ,
48 },
49};
50
51static struct platform_device at91sam9261_usbh_device = {
52 .name = "at91_ohci",
53 .id = -1,
54 .dev = {
55 .dma_mask = &ohci_dmamask,
56 .coherent_dma_mask = 0xffffffff,
57 .platform_data = &usbh_data,
58 },
59 .resource = usbh_resources,
60 .num_resources = ARRAY_SIZE(usbh_resources),
61};
62
63void __init at91_add_device_usbh(struct at91_usbh_data *data)
64{
65 if (!data)
66 return;
67
68 usbh_data = *data;
69 platform_device_register(&at91sam9261_usbh_device);
70}
71#else
72void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
73#endif
74
75
76/* --------------------------------------------------------------------
77 * USB Device (Gadget)
78 * -------------------------------------------------------------------- */
79
80#ifdef CONFIG_USB_GADGET_AT91
81static struct at91_udc_data udc_data;
82
83static struct resource udc_resources[] = {
84 [0] = {
85 .start = AT91SAM9261_BASE_UDP,
86 .end = AT91SAM9261_BASE_UDP + SZ_16K - 1,
87 .flags = IORESOURCE_MEM,
88 },
89 [1] = {
90 .start = AT91SAM9261_ID_UDP,
91 .end = AT91SAM9261_ID_UDP,
92 .flags = IORESOURCE_IRQ,
93 },
94};
95
96static struct platform_device at91sam9261_udc_device = {
97 .name = "at91_udc",
98 .id = -1,
99 .dev = {
100 .platform_data = &udc_data,
101 },
102 .resource = udc_resources,
103 .num_resources = ARRAY_SIZE(udc_resources),
104};
105
106void __init at91_add_device_udc(struct at91_udc_data *data)
107{
108 unsigned long x;
109
110 if (!data)
111 return;
112
113 if (data->vbus_pin) {
114 at91_set_gpio_input(data->vbus_pin, 0);
115 at91_set_deglitch(data->vbus_pin, 1);
116 }
117
118 /* Pullup pin is handled internally */
119 x = at91_sys_read(AT91_MATRIX_USBPUCR);
120 at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
121
122 udc_data = *data;
123 platform_device_register(&at91sam9261_udc_device);
124}
125#else
126void __init at91_add_device_udc(struct at91_udc_data *data) {}
127#endif
128
129/* --------------------------------------------------------------------
130 * MMC / SD
131 * -------------------------------------------------------------------- */
132
133#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
134static u64 mmc_dmamask = 0xffffffffUL;
135static struct at91_mmc_data mmc_data;
136
137static struct resource mmc_resources[] = {
138 [0] = {
139 .start = AT91SAM9261_BASE_MCI,
140 .end = AT91SAM9261_BASE_MCI + SZ_16K - 1,
141 .flags = IORESOURCE_MEM,
142 },
143 [1] = {
144 .start = AT91SAM9261_ID_MCI,
145 .end = AT91SAM9261_ID_MCI,
146 .flags = IORESOURCE_IRQ,
147 },
148};
149
150static struct platform_device at91sam9261_mmc_device = {
151 .name = "at91_mci",
152 .id = -1,
153 .dev = {
154 .dma_mask = &mmc_dmamask,
155 .coherent_dma_mask = 0xffffffff,
156 .platform_data = &mmc_data,
157 },
158 .resource = mmc_resources,
159 .num_resources = ARRAY_SIZE(mmc_resources),
160};
161
162void __init at91_add_device_mmc(struct at91_mmc_data *data)
163{
164 if (!data)
165 return;
166
167 /* input/irq */
168 if (data->det_pin) {
169 at91_set_gpio_input(data->det_pin, 1);
170 at91_set_deglitch(data->det_pin, 1);
171 }
172 if (data->wp_pin)
173 at91_set_gpio_input(data->wp_pin, 1);
174 if (data->vcc_pin)
175 at91_set_gpio_output(data->vcc_pin, 0);
176
177 /* CLK */
178 at91_set_B_periph(AT91_PIN_PA2, 0);
179
180 /* CMD */
181 at91_set_B_periph(AT91_PIN_PA1, 1);
182
183 /* DAT0, maybe DAT1..DAT3 */
184 at91_set_B_periph(AT91_PIN_PA0, 1);
185 if (data->wire4) {
186 at91_set_B_periph(AT91_PIN_PA4, 1);
187 at91_set_B_periph(AT91_PIN_PA5, 1);
188 at91_set_B_periph(AT91_PIN_PA6, 1);
189 }
190
191 mmc_data = *data;
192 platform_device_register(&at91sam9261_mmc_device);
193}
194#else
195void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
196#endif
197
198
199/* --------------------------------------------------------------------
200 * NAND / SmartMedia
201 * -------------------------------------------------------------------- */
202
203#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
204static struct at91_nand_data nand_data;
205
206#define NAND_BASE AT91_CHIPSELECT_3
207
208static struct resource nand_resources[] = {
209 {
210 .start = NAND_BASE,
211 .end = NAND_BASE + SZ_256M - 1,
212 .flags = IORESOURCE_MEM,
213 }
214};
215
216static struct platform_device at91_nand_device = {
217 .name = "at91_nand",
218 .id = -1,
219 .dev = {
220 .platform_data = &nand_data,
221 },
222 .resource = nand_resources,
223 .num_resources = ARRAY_SIZE(nand_resources),
224};
225
226void __init at91_add_device_nand(struct at91_nand_data *data)
227{
228 unsigned long csa, mode;
229
230 if (!data)
231 return;
232
233 csa = at91_sys_read(AT91_MATRIX_EBICSA);
234 at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
235
236 /* set the bus interface characteristics */
237 at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
238 | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
239
240 at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
241 | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
242
243 at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
244
245 if (data->bus_width_16)
246 mode = AT91_SMC_DBW_16;
247 else
248 mode = AT91_SMC_DBW_8;
249 at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
250
251 /* enable pin */
252 if (data->enable_pin)
253 at91_set_gpio_output(data->enable_pin, 1);
254
255 /* ready/busy pin */
256 if (data->rdy_pin)
257 at91_set_gpio_input(data->rdy_pin, 1);
258
259 /* card detect pin */
260 if (data->det_pin)
261 at91_set_gpio_input(data->det_pin, 1);
262
263 at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
264 at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
265
266 nand_data = *data;
267 platform_device_register(&at91_nand_device);
268}
269
270#else
271void __init at91_add_device_nand(struct at91_nand_data *data) {}
272#endif
273
274
275/* --------------------------------------------------------------------
276 * TWI (i2c)
277 * -------------------------------------------------------------------- */
278
279#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
280
281static struct resource twi_resources[] = {
282 [0] = {
283 .start = AT91SAM9261_BASE_TWI,
284 .end = AT91SAM9261_BASE_TWI + SZ_16K - 1,
285 .flags = IORESOURCE_MEM,
286 },
287 [1] = {
288 .start = AT91SAM9261_ID_TWI,
289 .end = AT91SAM9261_ID_TWI,
290 .flags = IORESOURCE_IRQ,
291 },
292};
293
294static struct platform_device at91sam9261_twi_device = {
295 .name = "at91_i2c",
296 .id = -1,
297 .resource = twi_resources,
298 .num_resources = ARRAY_SIZE(twi_resources),
299};
300
301void __init at91_add_device_i2c(void)
302{
303 /* pins used for TWI interface */
304 at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
305 at91_set_multi_drive(AT91_PIN_PA7, 1);
306
307 at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
308 at91_set_multi_drive(AT91_PIN_PA8, 1);
309
310 platform_device_register(&at91sam9261_twi_device);
311}
312#else
313void __init at91_add_device_i2c(void) {}
314#endif
315
316
317/* --------------------------------------------------------------------
318 * SPI
319 * -------------------------------------------------------------------- */
320
321#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
322static u64 spi_dmamask = 0xffffffffUL;
323
324static struct resource spi0_resources[] = {
325 [0] = {
326 .start = AT91SAM9261_BASE_SPI0,
327 .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
328 .flags = IORESOURCE_MEM,
329 },
330 [1] = {
331 .start = AT91SAM9261_ID_SPI0,
332 .end = AT91SAM9261_ID_SPI0,
333 .flags = IORESOURCE_IRQ,
334 },
335};
336
337static struct platform_device at91sam9261_spi0_device = {
338 .name = "atmel_spi",
339 .id = 0,
340 .dev = {
341 .dma_mask = &spi_dmamask,
342 .coherent_dma_mask = 0xffffffff,
343 },
344 .resource = spi0_resources,
345 .num_resources = ARRAY_SIZE(spi0_resources),
346};
347
348static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
349
350static struct resource spi1_resources[] = {
351 [0] = {
352 .start = AT91SAM9261_BASE_SPI1,
353 .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
354 .flags = IORESOURCE_MEM,
355 },
356 [1] = {
357 .start = AT91SAM9261_ID_SPI1,
358 .end = AT91SAM9261_ID_SPI1,
359 .flags = IORESOURCE_IRQ,
360 },
361};
362
363static struct platform_device at91sam9261_spi1_device = {
364 .name = "atmel_spi",
365 .id = 1,
366 .dev = {
367 .dma_mask = &spi_dmamask,
368 .coherent_dma_mask = 0xffffffff,
369 },
370 .resource = spi1_resources,
371 .num_resources = ARRAY_SIZE(spi1_resources),
372};
373
374static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
375
376void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
377{
378 int i;
379 unsigned long cs_pin;
380 short enable_spi0 = 0;
381 short enable_spi1 = 0;
382
383 /* Choose SPI chip-selects */
384 for (i = 0; i < nr_devices; i++) {
385 if (devices[i].controller_data)
386 cs_pin = (unsigned long) devices[i].controller_data;
387 else if (devices[i].bus_num == 0)
388 cs_pin = spi0_standard_cs[devices[i].chip_select];
389 else
390 cs_pin = spi1_standard_cs[devices[i].chip_select];
391
392 if (devices[i].bus_num == 0)
393 enable_spi0 = 1;
394 else
395 enable_spi1 = 1;
396
397 /* enable chip-select pin */
398 at91_set_gpio_output(cs_pin, 1);
399
400 /* pass chip-select pin to driver */
401 devices[i].controller_data = (void *) cs_pin;
402 }
403
404 spi_register_board_info(devices, nr_devices);
405
406 /* Configure SPI bus(es) */
407 if (enable_spi0) {
408 at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
409 at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
410 at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
411
412 at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
413 platform_device_register(&at91sam9261_spi0_device);
414 }
415 if (enable_spi1) {
416 at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */
417 at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
418 at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
419
420 at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
421 platform_device_register(&at91sam9261_spi1_device);
422 }
423}
424#else
425void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
426#endif
427
428
429/* --------------------------------------------------------------------
430 * LCD Controller
431 * -------------------------------------------------------------------- */
432
433#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
434static u64 lcdc_dmamask = 0xffffffffUL;
435static struct at91fb_info lcdc_data;
436
437static struct resource lcdc_resources[] = {
438 [0] = {
439 .start = AT91SAM9261_LCDC_BASE,
440 .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
441 .flags = IORESOURCE_MEM,
442 },
443 [1] = {
444 .start = AT91SAM9261_ID_LCDC,
445 .end = AT91SAM9261_ID_LCDC,
446 .flags = IORESOURCE_IRQ,
447 },
448#if defined(CONFIG_FB_INTSRAM)
449 [2] = {
450 .start = AT91SAM9261_SRAM_BASE,
451 .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
452 .flags = IORESOURCE_MEM,
453 },
454#endif
455};
456
457static struct platform_device at91_lcdc_device = {
458 .name = "at91-fb",
459 .id = 0,
460 .dev = {
461 .dma_mask = &lcdc_dmamask,
462 .coherent_dma_mask = 0xffffffff,
463 .platform_data = &lcdc_data,
464 },
465 .resource = lcdc_resources,
466 .num_resources = ARRAY_SIZE(lcdc_resources),
467};
468
469void __init at91_add_device_lcdc(struct at91fb_info *data)
470{
471 if (!data) {
472 return;
473 }
474
475 at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
476 at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
477 at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
478 at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
479 at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
480 at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
481 at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
482 at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
483 at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
484 at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
485 at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
486 at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
487 at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
488 at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
489 at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
490 at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
491 at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
492 at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
493 at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
494 at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
495 at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
496 at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
497
498 lcdc_data = *data;
499 platform_device_register(&at91_lcdc_device);
500}
501#else
502void __init at91_add_device_lcdc(struct at91fb_info *data) {}
503#endif
504
505
506/* --------------------------------------------------------------------
507 * LEDs
508 * -------------------------------------------------------------------- */
509
510#if defined(CONFIG_LEDS)
511u8 at91_leds_cpu;
512u8 at91_leds_timer;
513
514void __init at91_init_leds(u8 cpu_led, u8 timer_led)
515{
516 at91_leds_cpu = cpu_led;
517 at91_leds_timer = timer_led;
518}
519#else
520void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
521#endif
522
523
524/* --------------------------------------------------------------------
525 * UART
526 * -------------------------------------------------------------------- */
527
528#if defined(CONFIG_SERIAL_ATMEL)
529static struct resource dbgu_resources[] = {
530 [0] = {
531 .start = AT91_VA_BASE_SYS + AT91_DBGU,
532 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
533 .flags = IORESOURCE_MEM,
534 },
535 [1] = {
536 .start = AT91_ID_SYS,
537 .end = AT91_ID_SYS,
538 .flags = IORESOURCE_IRQ,
539 },
540};
541
542static struct atmel_uart_data dbgu_data = {
543 .use_dma_tx = 0,
544 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
545 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
546};
547
548static struct platform_device at91sam9261_dbgu_device = {
549 .name = "atmel_usart",
550 .id = 0,
551 .dev = {
552 .platform_data = &dbgu_data,
553 .coherent_dma_mask = 0xffffffff,
554 },
555 .resource = dbgu_resources,
556 .num_resources = ARRAY_SIZE(dbgu_resources),
557};
558
559static inline void configure_dbgu_pins(void)
560{
561 at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
562 at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
563}
564
565static struct resource uart0_resources[] = {
566 [0] = {
567 .start = AT91SAM9261_BASE_US0,
568 .end = AT91SAM9261_BASE_US0 + SZ_16K - 1,
569 .flags = IORESOURCE_MEM,
570 },
571 [1] = {
572 .start = AT91SAM9261_ID_US0,
573 .end = AT91SAM9261_ID_US0,
574 .flags = IORESOURCE_IRQ,
575 },
576};
577
578static struct atmel_uart_data uart0_data = {
579 .use_dma_tx = 1,
580 .use_dma_rx = 1,
581};
582
583static struct platform_device at91sam9261_uart0_device = {
584 .name = "atmel_usart",
585 .id = 1,
586 .dev = {
587 .platform_data = &uart0_data,
588 .coherent_dma_mask = 0xffffffff,
589 },
590 .resource = uart0_resources,
591 .num_resources = ARRAY_SIZE(uart0_resources),
592};
593
594static inline void configure_usart0_pins(void)
595{
596 at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
597 at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
598 at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
599 at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
600}
601
602static struct resource uart1_resources[] = {
603 [0] = {
604 .start = AT91SAM9261_BASE_US1,
605 .end = AT91SAM9261_BASE_US1 + SZ_16K - 1,
606 .flags = IORESOURCE_MEM,
607 },
608 [1] = {
609 .start = AT91SAM9261_ID_US1,
610 .end = AT91SAM9261_ID_US1,
611 .flags = IORESOURCE_IRQ,
612 },
613};
614
615static struct atmel_uart_data uart1_data = {
616 .use_dma_tx = 1,
617 .use_dma_rx = 1,
618};
619
620static struct platform_device at91sam9261_uart1_device = {
621 .name = "atmel_usart",
622 .id = 2,
623 .dev = {
624 .platform_data = &uart1_data,
625 .coherent_dma_mask = 0xffffffff,
626 },
627 .resource = uart1_resources,
628 .num_resources = ARRAY_SIZE(uart1_resources),
629};
630
631static inline void configure_usart1_pins(void)
632{
633 at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
634 at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
635}
636
637static struct resource uart2_resources[] = {
638 [0] = {
639 .start = AT91SAM9261_BASE_US2,
640 .end = AT91SAM9261_BASE_US2 + SZ_16K - 1,
641 .flags = IORESOURCE_MEM,
642 },
643 [1] = {
644 .start = AT91SAM9261_ID_US2,
645 .end = AT91SAM9261_ID_US2,
646 .flags = IORESOURCE_IRQ,
647 },
648};
649
650static struct atmel_uart_data uart2_data = {
651 .use_dma_tx = 1,
652 .use_dma_rx = 1,
653};
654
655static struct platform_device at91sam9261_uart2_device = {
656 .name = "atmel_usart",
657 .id = 3,
658 .dev = {
659 .platform_data = &uart2_data,
660 .coherent_dma_mask = 0xffffffff,
661 },
662 .resource = uart2_resources,
663 .num_resources = ARRAY_SIZE(uart2_resources),
664};
665
666static inline void configure_usart2_pins(void)
667{
668 at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
669 at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
670}
671
672struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
673struct platform_device *atmel_default_console_device; /* the serial console device */
674
675void __init at91_init_serial(struct at91_uart_config *config)
676{
677 int i;
678
679 /* Fill in list of supported UARTs */
680 for (i = 0; i < config->nr_tty; i++) {
681 switch (config->tty_map[i]) {
682 case 0:
683 configure_usart0_pins();
684 at91_uarts[i] = &at91sam9261_uart0_device;
685 at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
686 break;
687 case 1:
688 configure_usart1_pins();
689 at91_uarts[i] = &at91sam9261_uart1_device;
690 at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
691 break;
692 case 2:
693 configure_usart2_pins();
694 at91_uarts[i] = &at91sam9261_uart2_device;
695 at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
696 break;
697 case 3:
698 configure_dbgu_pins();
699 at91_uarts[i] = &at91sam9261_dbgu_device;
700 at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
701 break;
702 default:
703 continue;
704 }
705 at91_uarts[i]->id = i; /* update ID number to mapped ID */
706 }
707
708 /* Set serial console device */
709 if (config->console_tty < ATMEL_MAX_UART)
710 atmel_default_console_device = at91_uarts[config->console_tty];
711 if (!atmel_default_console_device)
712 printk(KERN_INFO "AT91: No default serial console defined.\n");
713}
714
715void __init at91_add_device_serial(void)
716{
717 int i;
718
719 for (i = 0; i < ATMEL_MAX_UART; i++) {
720 if (at91_uarts[i])
721 platform_device_register(at91_uarts[i]);
722 }
723}
724#else
725void __init at91_init_serial(struct at91_uart_config *config) {}
726void __init at91_add_device_serial(void) {}
727#endif
728
729
730/* -------------------------------------------------------------------- */
731
732/*
733 * These devices are always present and don't need any board-specific
734 * setup.
735 */
736static int __init at91_add_standard_devices(void)
737{
738 return 0;
739}
740
741arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
new file mode 100644
index 000000000000..59cbbe1e8161
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -0,0 +1,114 @@
1/*
2 * linux/arch/arm/mach-at91/at91sam926x_time.c
3 *
4 * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
5 * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/init.h>
13#include <linux/interrupt.h>
14#include <linux/irq.h>
15#include <linux/kernel.h>
16#include <linux/sched.h>
17#include <linux/time.h>
18
19#include <asm/hardware.h>
20#include <asm/io.h>
21#include <asm/mach/time.h>
22
23#include <asm/arch/at91_pit.h>
24
25
26#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
27#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
28
29/*
30 * Returns number of microseconds since last timer interrupt. Note that interrupts
31 * will have been disabled by do_gettimeofday()
32 * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
33 * 'tick' is usecs per jiffy (linux/timex.h).
34 */
35static unsigned long at91sam926x_gettimeoffset(void)
36{
37 unsigned long elapsed;
38 unsigned long t = at91_sys_read(AT91_PIT_PIIR);
39
40 elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
41
42 return (unsigned long)(elapsed * 1000000) / LATCH;
43}
44
45/*
46 * IRQ handler for the timer.
47 */
48static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
49{
50 volatile long nr_ticks;
51
52 if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
53 write_seqlock(&xtime_lock);
54
55 /* Get number to ticks performed before interrupt and clear PIT interrupt */
56 nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
57 do {
58 timer_tick();
59 nr_ticks--;
60 } while (nr_ticks);
61
62 write_sequnlock(&xtime_lock);
63 return IRQ_HANDLED;
64 } else
65 return IRQ_NONE; /* not handled */
66}
67
68static struct irqaction at91sam926x_timer_irq = {
69 .name = "at91_tick",
70 .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
71 .handler = at91sam926x_timer_interrupt
72};
73
74void at91sam926x_timer_reset(void)
75{
76 /* Disable timer */
77 at91_sys_write(AT91_PIT_MR, 0);
78
79 /* Clear any pending interrupts */
80 (void) at91_sys_read(AT91_PIT_PIVR);
81
82 /* Set Period Interval timer and enable its interrupt */
83 at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
84}
85
86/*
87 * Set up timer interrupt.
88 */
89void __init at91sam926x_timer_init(void)
90{
91 /* Initialize and enable the timer */
92 at91sam926x_timer_reset();
93
94 /* Make IRQs happen for the system timer. */
95 setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
96}
97
98#ifdef CONFIG_PM
99static void at91sam926x_timer_suspend(void)
100{
101 /* Disable timer */
102 at91_sys_write(AT91_PIT_MR, 0);
103}
104#else
105#define at91sam926x_timer_suspend NULL
106#endif
107
108struct sys_timer at91sam926x_timer = {
109 .init = at91sam926x_timer_init,
110 .offset = at91sam926x_gettimeoffset,
111 .suspend = at91sam926x_timer_suspend,
112 .resume = at91sam926x_timer_reset,
113};
114
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
new file mode 100644
index 000000000000..2d3d4b6f7b02
--- /dev/null
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -0,0 +1,102 @@
1/*
2 * linux/arch/arm/mach-at91/board-1arm.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/init.h>
23#include <linux/mm.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
26
27#include <asm/hardware.h>
28#include <asm/setup.h>
29#include <asm/mach-types.h>
30#include <asm/irq.h>
31
32#include <asm/mach/arch.h>
33#include <asm/mach/map.h>
34#include <asm/mach/irq.h>
35
36#include <asm/arch/board.h>
37#include <asm/arch/gpio.h>
38
39#include "generic.h"
40
41
42/*
43 * Serial port configuration.
44 * 0 .. 3 = USART0 .. USART3
45 * 4 = DBGU
46 */
47static struct at91_uart_config __initdata onearm_uart_config = {
48 .console_tty = 0, /* ttyS0 */
49 .nr_tty = 3,
50 .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
51};
52
53static void __init onearm_map_io(void)
54{
55 /* Initialize processor: 18.432 MHz crystal */
56 at91rm9200_initialize(18432000, AT91RM9200_PQFP);
57
58 /* Setup the serial ports and console */
59 at91_init_serial(&onearm_uart_config);
60}
61
62static void __init onearm_init_irq(void)
63{
64 at91rm9200_init_interrupts(NULL);
65}
66
67static struct at91_eth_data __initdata onearm_eth_data = {
68 .phy_irq_pin = AT91_PIN_PC4,
69 .is_rmii = 1,
70};
71
72static struct at91_usbh_data __initdata onearm_usbh_data = {
73 .ports = 1,
74};
75
76static struct at91_udc_data __initdata onearm_udc_data = {
77 .vbus_pin = AT91_PIN_PC2,
78 .pullup_pin = AT91_PIN_PC3,
79};
80
81static void __init onearm_board_init(void)
82{
83 /* Serial */
84 at91_add_device_serial();
85 /* Ethernet */
86 at91_add_device_eth(&onearm_eth_data);
87 /* USB Host */
88 at91_add_device_usbh(&onearm_usbh_data);
89 /* USB Device */
90 at91_add_device_udc(&onearm_udc_data);
91}
92
93MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
94 /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
95 .phys_io = AT91_BASE_SYS,
96 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
97 .boot_params = AT91_SDRAM_BASE + 0x100,
98 .timer = &at91rm9200_timer,
99 .map_io = onearm_map_io,
100 .init_irq = onearm_init_irq,
101 .init_machine = onearm_board_init,
102MACHINE_END
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
new file mode 100644
index 000000000000..a0815322f685
--- /dev/null
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -0,0 +1,149 @@
1/*
2 * linux/arch/arm/mach-at91/board-carmeva.c
3 *
4 * Copyright (c) 2005 Peer Georgi
5 * Conitec Datasystems
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27
28#include <asm/hardware.h>
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <asm/arch/board.h>
38#include <asm/arch/gpio.h>
39
40#include "generic.h"
41
42
43/*
44 * Serial port configuration.
45 * 0 .. 3 = USART0 .. USART3
46 * 4 = DBGU
47 */
48static struct at91_uart_config __initdata carmeva_uart_config = {
49 .console_tty = 0, /* ttyS0 */
50 .nr_tty = 2,
51 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
52};
53
54static void __init carmeva_map_io(void)
55{
56 /* Initialize processor: 20.000 MHz crystal */
57 at91rm9200_initialize(20000000, AT91RM9200_BGA);
58
59 /* Setup the serial ports and console */
60 at91_init_serial(&carmeva_uart_config);
61}
62
63static void __init carmeva_init_irq(void)
64{
65 at91rm9200_init_interrupts(NULL);
66}
67
68static struct at91_eth_data __initdata carmeva_eth_data = {
69 .phy_irq_pin = AT91_PIN_PC4,
70 .is_rmii = 1,
71};
72
73static struct at91_usbh_data __initdata carmeva_usbh_data = {
74 .ports = 2,
75};
76
77static struct at91_udc_data __initdata carmeva_udc_data = {
78 .vbus_pin = AT91_PIN_PD12,
79 .pullup_pin = AT91_PIN_PD9,
80};
81
82/* FIXME: user dependend */
83// static struct at91_cf_data __initdata carmeva_cf_data = {
84// .det_pin = AT91_PIN_PB0,
85// .rst_pin = AT91_PIN_PC5,
86 // .irq_pin = ... not connected
87 // .vcc_pin = ... always powered
88// };
89
90static struct at91_mmc_data __initdata carmeva_mmc_data = {
91 .slot_b = 0,
92 .wire4 = 1,
93 .det_pin = AT91_PIN_PB10,
94 .wp_pin = AT91_PIN_PC14,
95};
96
97static struct spi_board_info carmeva_spi_devices[] = {
98 { /* DataFlash chip */
99 .modalias = "mtd_dataflash",
100 .chip_select = 0,
101 .max_speed_hz = 10 * 1000 * 1000,
102 },
103 { /* User accessable spi - cs1 (250KHz) */
104 .modalias = "spi-cs1",
105 .chip_select = 1,
106 .max_speed_hz = 250 * 1000,
107 },
108 { /* User accessable spi - cs2 (1MHz) */
109 .modalias = "spi-cs2",
110 .chip_select = 2,
111 .max_speed_hz = 1 * 1000 * 1000,
112 },
113 { /* User accessable spi - cs3 (10MHz) */
114 .modalias = "spi-cs3",
115 .chip_select = 3,
116 .max_speed_hz = 10 * 1000 * 1000,
117 },
118};
119
120static void __init carmeva_board_init(void)
121{
122 /* Serial */
123 at91_add_device_serial();
124 /* Ethernet */
125 at91_add_device_eth(&carmeva_eth_data);
126 /* USB Host */
127 at91_add_device_usbh(&carmeva_usbh_data);
128 /* USB Device */
129 at91_add_device_udc(&carmeva_udc_data);
130 /* I2C */
131 at91_add_device_i2c();
132 /* SPI */
133 at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
134 /* Compact Flash */
135// at91_add_device_cf(&carmeva_cf_data);
136 /* MMC */
137 at91_add_device_mmc(&carmeva_mmc_data);
138}
139
140MACHINE_START(CARMEVA, "Carmeva")
141 /* Maintainer: Conitec Datasystems */
142 .phys_io = AT91_BASE_SYS,
143 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
144 .boot_params = AT91_SDRAM_BASE + 0x100,
145 .timer = &at91rm9200_timer,
146 .map_io = carmeva_map_io,
147 .init_irq = carmeva_init_irq,
148 .init_machine = carmeva_board_init,
149MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
new file mode 100644
index 000000000000..45d6d9b8f5e9
--- /dev/null
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -0,0 +1,145 @@
1/*
2 * linux/arch/arm/mach-at91/board-csb337.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/init.h>
23#include <linux/mm.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
26#include <linux/spi/spi.h>
27
28#include <asm/hardware.h>
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <asm/arch/board.h>
38#include <asm/arch/gpio.h>
39
40#include "generic.h"
41
42
43/*
44 * Serial port configuration.
45 * 0 .. 3 = USART0 .. USART3
46 * 4 = DBGU
47 */
48static struct at91_uart_config __initdata csb337_uart_config = {
49 .console_tty = 0, /* ttyS0 */
50 .nr_tty = 2,
51 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
52};
53
54static void __init csb337_map_io(void)
55{
56 /* Initialize processor: 3.6864 MHz crystal */
57 at91rm9200_initialize(3686400, AT91RM9200_BGA);
58
59 /* Setup the LEDs */
60 at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
61
62 /* Setup the serial ports and console */
63 at91_init_serial(&csb337_uart_config);
64}
65
66static void __init csb337_init_irq(void)
67{
68 at91rm9200_init_interrupts(NULL);
69}
70
71static struct at91_eth_data __initdata csb337_eth_data = {
72 .phy_irq_pin = AT91_PIN_PC2,
73 .is_rmii = 0,
74};
75
76static struct at91_usbh_data __initdata csb337_usbh_data = {
77 .ports = 2,
78};
79
80static struct at91_udc_data __initdata csb337_udc_data = {
81 // this has no VBUS sensing pin
82 .pullup_pin = AT91_PIN_PA24,
83};
84
85static struct at91_cf_data __initdata csb337_cf_data = {
86 /*
87 * connector P4 on the CSB 337 mates to
88 * connector P8 on the CSB 300CF
89 */
90
91 /* CSB337 specific */
92 .det_pin = AT91_PIN_PC3,
93
94 /* CSB300CF specific */
95 .irq_pin = AT91_PIN_PA19,
96 .vcc_pin = AT91_PIN_PD0,
97 .rst_pin = AT91_PIN_PD2,
98};
99
100static struct at91_mmc_data __initdata csb337_mmc_data = {
101 .det_pin = AT91_PIN_PD5,
102 .slot_b = 0,
103 .wire4 = 1,
104 .wp_pin = AT91_PIN_PD6,
105};
106
107static struct spi_board_info csb337_spi_devices[] = {
108 { /* CAN controller */
109 .modalias = "sak82c900",
110 .chip_select = 0,
111 .max_speed_hz = 6 * 1000 * 1000,
112 },
113};
114
115static void __init csb337_board_init(void)
116{
117 /* Serial */
118 at91_add_device_serial();
119 /* Ethernet */
120 at91_add_device_eth(&csb337_eth_data);
121 /* USB Host */
122 at91_add_device_usbh(&csb337_usbh_data);
123 /* USB Device */
124 at91_add_device_udc(&csb337_udc_data);
125 /* I2C */
126 at91_add_device_i2c();
127 /* Compact Flash */
128 at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
129 at91_add_device_cf(&csb337_cf_data);
130 /* SPI */
131 at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
132 /* MMC */
133 at91_add_device_mmc(&csb337_mmc_data);
134}
135
136MACHINE_START(CSB337, "Cogent CSB337")
137 /* Maintainer: Bill Gatliff */
138 .phys_io = AT91_BASE_SYS,
139 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
140 .boot_params = AT91_SDRAM_BASE + 0x100,
141 .timer = &at91rm9200_timer,
142 .map_io = csb337_map_io,
143 .init_irq = csb337_init_irq,
144 .init_machine = csb337_board_init,
145MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
new file mode 100644
index 000000000000..774609479c74
--- /dev/null
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -0,0 +1,109 @@
1/*
2 * linux/arch/arm/mach-at91/board-csb637.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/init.h>
23#include <linux/mm.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
26
27#include <asm/hardware.h>
28#include <asm/setup.h>
29#include <asm/mach-types.h>
30#include <asm/irq.h>
31
32#include <asm/mach/arch.h>
33#include <asm/mach/map.h>
34#include <asm/mach/irq.h>
35
36#include <asm/arch/board.h>
37#include <asm/arch/gpio.h>
38
39#include "generic.h"
40
41
42/*
43 * Serial port configuration.
44 * 0 .. 3 = USART0 .. USART3
45 * 4 = DBGU
46 */
47static struct at91_uart_config __initdata csb637_uart_config = {
48 .console_tty = 0, /* ttyS0 */
49 .nr_tty = 2,
50 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
51};
52
53static void __init csb637_map_io(void)
54{
55 /* Initialize processor: 3.6864 MHz crystal */
56 at91rm9200_initialize(3686400, AT91RM9200_BGA);
57
58 /* Setup the LEDs */
59 at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
60
61 /* Setup the serial ports and console */
62 at91_init_serial(&csb637_uart_config);
63}
64
65static void __init csb637_init_irq(void)
66{
67 at91rm9200_init_interrupts(NULL);
68}
69
70static struct at91_eth_data __initdata csb637_eth_data = {
71 .phy_irq_pin = AT91_PIN_PC0,
72 .is_rmii = 0,
73};
74
75static struct at91_usbh_data __initdata csb637_usbh_data = {
76 .ports = 2,
77};
78
79static struct at91_udc_data __initdata csb637_udc_data = {
80 .vbus_pin = AT91_PIN_PB28,
81 .pullup_pin = AT91_PIN_PB1,
82};
83
84static void __init csb637_board_init(void)
85{
86 /* Serial */
87 at91_add_device_serial();
88 /* Ethernet */
89 at91_add_device_eth(&csb637_eth_data);
90 /* USB Host */
91 at91_add_device_usbh(&csb637_usbh_data);
92 /* USB Device */
93 at91_add_device_udc(&csb637_udc_data);
94 /* I2C */
95 at91_add_device_i2c();
96 /* SPI */
97 at91_add_device_spi(NULL, 0);
98}
99
100MACHINE_START(CSB637, "Cogent CSB637")
101 /* Maintainer: Bill Gatliff */
102 .phys_io = AT91_BASE_SYS,
103 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
104 .boot_params = AT91_SDRAM_BASE + 0x100,
105 .timer = &at91rm9200_timer,
106 .map_io = csb637_map_io,
107 .init_irq = csb637_init_irq,
108 .init_machine = csb637_board_init,
109MACHINE_END
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
new file mode 100644
index 000000000000..7401dbe1b474
--- /dev/null
+++ b/arch/arm/mach-at91/board-dk.c
@@ -0,0 +1,216 @@
1/*
2 * linux/arch/arm/mach-at91/board-dk.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * Epson S1D framebuffer glue code is:
7 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/types.h>
25#include <linux/init.h>
26#include <linux/mm.h>
27#include <linux/module.h>
28#include <linux/platform_device.h>
29#include <linux/spi/spi.h>
30#include <linux/mtd/physmap.h>
31
32#include <asm/hardware.h>
33#include <asm/setup.h>
34#include <asm/mach-types.h>
35#include <asm/irq.h>
36
37#include <asm/mach/arch.h>
38#include <asm/mach/map.h>
39#include <asm/mach/irq.h>
40
41#include <asm/arch/board.h>
42#include <asm/arch/gpio.h>
43#include <asm/arch/at91rm9200_mc.h>
44
45#include "generic.h"
46
47
48/*
49 * Serial port configuration.
50 * 0 .. 3 = USART0 .. USART3
51 * 4 = DBGU
52 */
53static struct at91_uart_config __initdata dk_uart_config = {
54 .console_tty = 0, /* ttyS0 */
55 .nr_tty = 2,
56 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
57};
58
59static void __init dk_map_io(void)
60{
61 /* Initialize processor: 18.432 MHz crystal */
62 at91rm9200_initialize(18432000, AT91RM9200_BGA);
63
64 /* Setup the LEDs */
65 at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
66
67 /* Setup the serial ports and console */
68 at91_init_serial(&dk_uart_config);
69}
70
71static void __init dk_init_irq(void)
72{
73 at91rm9200_init_interrupts(NULL);
74}
75
76static struct at91_eth_data __initdata dk_eth_data = {
77 .phy_irq_pin = AT91_PIN_PC4,
78 .is_rmii = 1,
79};
80
81static struct at91_usbh_data __initdata dk_usbh_data = {
82 .ports = 2,
83};
84
85static struct at91_udc_data __initdata dk_udc_data = {
86 .vbus_pin = AT91_PIN_PD4,
87 .pullup_pin = AT91_PIN_PD5,
88};
89
90static struct at91_cf_data __initdata dk_cf_data = {
91 .det_pin = AT91_PIN_PB0,
92 .rst_pin = AT91_PIN_PC5,
93 // .irq_pin = ... not connected
94 // .vcc_pin = ... always powered
95};
96
97static struct at91_mmc_data __initdata dk_mmc_data = {
98 .slot_b = 0,
99 .wire4 = 1,
100};
101
102static struct spi_board_info dk_spi_devices[] = {
103 { /* DataFlash chip */
104 .modalias = "mtd_dataflash",
105 .chip_select = 0,
106 .max_speed_hz = 15 * 1000 * 1000,
107 },
108 { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
109 .modalias = "ur6hcps2",
110 .chip_select = 1,
111 .max_speed_hz = 250 * 1000,
112 },
113 { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
114 .modalias = "tlv1504",
115 .chip_select = 2,
116 .max_speed_hz = 20 * 1000 * 1000,
117 },
118#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
119 { /* DataFlash card */
120 .modalias = "mtd_dataflash",
121 .chip_select = 3,
122 .max_speed_hz = 15 * 1000 * 1000,
123 }
124#endif
125};
126
127static struct mtd_partition __initdata dk_nand_partition[] = {
128 {
129 .name = "NAND Partition 1",
130 .offset = 0,
131 .size = MTDPART_SIZ_FULL,
132 },
133};
134
135static struct mtd_partition *nand_partitions(int size, int *num_partitions)
136{
137 *num_partitions = ARRAY_SIZE(dk_nand_partition);
138 return dk_nand_partition;
139}
140
141static struct at91_nand_data __initdata dk_nand_data = {
142 .ale = 22,
143 .cle = 21,
144 .det_pin = AT91_PIN_PB1,
145 .rdy_pin = AT91_PIN_PC2,
146 // .enable_pin = ... not there
147 .partition_info = nand_partitions,
148};
149
150#define DK_FLASH_BASE AT91_CHIPSELECT_0
151#define DK_FLASH_SIZE 0x200000
152
153static struct physmap_flash_data dk_flash_data = {
154 .width = 2,
155};
156
157static struct resource dk_flash_resource = {
158 .start = DK_FLASH_BASE,
159 .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
160 .flags = IORESOURCE_MEM,
161};
162
163static struct platform_device dk_flash = {
164 .name = "physmap-flash",
165 .id = 0,
166 .dev = {
167 .platform_data = &dk_flash_data,
168 },
169 .resource = &dk_flash_resource,
170 .num_resources = 1,
171};
172
173
174static void __init dk_board_init(void)
175{
176 /* Serial */
177 at91_add_device_serial();
178 /* Ethernet */
179 at91_add_device_eth(&dk_eth_data);
180 /* USB Host */
181 at91_add_device_usbh(&dk_usbh_data);
182 /* USB Device */
183 at91_add_device_udc(&dk_udc_data);
184 at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
185 /* Compact Flash */
186 at91_add_device_cf(&dk_cf_data);
187 /* I2C */
188 at91_add_device_i2c();
189 /* SPI */
190 at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
191#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
192 /* DataFlash card */
193 at91_set_gpio_output(AT91_PIN_PB7, 0);
194#else
195 /* MMC */
196 at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
197 at91_add_device_mmc(&dk_mmc_data);
198#endif
199 /* NAND */
200 at91_add_device_nand(&dk_nand_data);
201 /* NOR Flash */
202 platform_device_register(&dk_flash);
203 /* VGA */
204// dk_add_device_video();
205}
206
207MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
208 /* Maintainer: SAN People/Atmel */
209 .phys_io = AT91_BASE_SYS,
210 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
211 .boot_params = AT91_SDRAM_BASE + 0x100,
212 .timer = &at91rm9200_timer,
213 .map_io = dk_map_io,
214 .init_irq = dk_init_irq,
215 .init_machine = dk_board_init,
216MACHINE_END
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
new file mode 100644
index 000000000000..56d5ef63e04e
--- /dev/null
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -0,0 +1,123 @@
1/*
2 * linux/arch/arm/mach-at91/board-eb9200.c
3 *
4 * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
5 * by Andrew Patrikalakis
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/device.h>
27
28#include <asm/hardware.h>
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <asm/arch/board.h>
38#include <asm/arch/gpio.h>
39
40#include "generic.h"
41
42
43/*
44 * Serial port configuration.
45 * 0 .. 3 = USART0 .. USART3
46 * 4 = DBGU
47 */
48static struct at91_uart_config __initdata eb9200_uart_config = {
49 .console_tty = 0, /* ttyS0 */
50 .nr_tty = 2,
51 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
52};
53
54static void __init eb9200_map_io(void)
55{
56 /* Initialize processor: 18.432 MHz crystal */
57 at91rm9200_initialize(18432000, AT91RM9200_BGA);
58
59 /* Setup the serial ports and console */
60 at91_init_serial(&eb9200_uart_config);
61}
62
63static void __init eb9200_init_irq(void)
64{
65 at91rm9200_init_interrupts(NULL);
66}
67
68static struct at91_eth_data __initdata eb9200_eth_data = {
69 .phy_irq_pin = AT91_PIN_PC4,
70 .is_rmii = 1,
71};
72
73static struct at91_usbh_data __initdata eb9200_usbh_data = {
74 .ports = 2,
75};
76
77static struct at91_udc_data __initdata eb9200_udc_data = {
78 .vbus_pin = AT91_PIN_PD4,
79 .pullup_pin = AT91_PIN_PD5,
80};
81
82static struct at91_cf_data __initdata eb9200_cf_data = {
83 .det_pin = AT91_PIN_PB0,
84 .rst_pin = AT91_PIN_PC5,
85 // .irq_pin = ... not connected
86 // .vcc_pin = ... always powered
87};
88
89static struct at91_mmc_data __initdata eb9200_mmc_data = {
90 .slot_b = 0,
91 .wire4 = 1,
92};
93
94static void __init eb9200_board_init(void)
95{
96 /* Serial */
97 at91_add_device_serial();
98 /* Ethernet */
99 at91_add_device_eth(&eb9200_eth_data);
100 /* USB Host */
101 at91_add_device_usbh(&eb9200_usbh_data);
102 /* USB Device */
103 at91_add_device_udc(&eb9200_udc_data);
104 /* I2C */
105 at91_add_device_i2c();
106 /* Compact Flash */
107 at91_add_device_cf(&eb9200_cf_data);
108 /* SPI */
109 at91_add_device_spi(NULL, 0);
110 /* MMC */
111 /* only supports 1 or 4 bit interface, not wired through to SPI */
112 at91_add_device_mmc(&eb9200_mmc_data);
113}
114
115MACHINE_START(ATEB9200, "Embest ATEB9200")
116 .phys_io = AT91_BASE_SYS,
117 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
118 .boot_params = AT91_SDRAM_BASE + 0x100,
119 .timer = &at91rm9200_timer,
120 .map_io = eb9200_map_io,
121 .init_irq = eb9200_init_irq,
122 .init_machine = eb9200_board_init,
123MACHINE_END
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
new file mode 100644
index 000000000000..0f589dd7d1a9
--- /dev/null
+++ b/arch/arm/mach-at91/board-ek.c
@@ -0,0 +1,174 @@
1/*
2 * linux/arch/arm/mach-at91/board-ek.c
3 *
4 * Copyright (C) 2005 SAN People
5 *
6 * Epson S1D framebuffer glue code is:
7 * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/types.h>
25#include <linux/init.h>
26#include <linux/mm.h>
27#include <linux/module.h>
28#include <linux/platform_device.h>
29#include <linux/spi/spi.h>
30#include <linux/mtd/physmap.h>
31
32#include <asm/hardware.h>
33#include <asm/setup.h>
34#include <asm/mach-types.h>
35#include <asm/irq.h>
36
37#include <asm/mach/arch.h>
38#include <asm/mach/map.h>
39#include <asm/mach/irq.h>
40
41#include <asm/arch/board.h>
42#include <asm/arch/gpio.h>
43#include <asm/arch/at91rm9200_mc.h>
44
45#include "generic.h"
46
47
48/*
49 * Serial port configuration.
50 * 0 .. 3 = USART0 .. USART3
51 * 4 = DBGU
52 */
53static struct at91_uart_config __initdata ek_uart_config = {
54 .console_tty = 0, /* ttyS0 */
55 .nr_tty = 2,
56 .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
57};
58
59static void __init ek_map_io(void)
60{
61 /* Initialize processor: 18.432 MHz crystal */
62 at91rm9200_initialize(18432000, AT91RM9200_BGA);
63
64 /* Setup the LEDs */
65 at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
66
67 /* Setup the serial ports and console */
68 at91_init_serial(&ek_uart_config);
69}
70
71static void __init ek_init_irq(void)
72{
73 at91rm9200_init_interrupts(NULL);
74}
75
76static struct at91_eth_data __initdata ek_eth_data = {
77 .phy_irq_pin = AT91_PIN_PC4,
78 .is_rmii = 1,
79};
80
81static struct at91_usbh_data __initdata ek_usbh_data = {
82 .ports = 2,
83};
84
85static struct at91_udc_data __initdata ek_udc_data = {
86 .vbus_pin = AT91_PIN_PD4,
87 .pullup_pin = AT91_PIN_PD5,
88};
89
90static struct at91_mmc_data __initdata ek_mmc_data = {
91 .det_pin = AT91_PIN_PB27,
92 .slot_b = 0,
93 .wire4 = 1,
94 .wp_pin = AT91_PIN_PA17,
95};
96
97static struct spi_board_info ek_spi_devices[] = {
98 { /* DataFlash chip */
99 .modalias = "mtd_dataflash",
100 .chip_select = 0,
101 .max_speed_hz = 15 * 1000 * 1000,
102 },
103#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
104 { /* DataFlash card */
105 .modalias = "mtd_dataflash",
106 .chip_select = 3,
107 .max_speed_hz = 15 * 1000 * 1000,
108 },
109#endif
110};
111
112#define EK_FLASH_BASE AT91_CHIPSELECT_0
113#define EK_FLASH_SIZE 0x200000
114
115static struct physmap_flash_data ek_flash_data = {
116 .width = 2,
117};
118
119static struct resource ek_flash_resource = {
120 .start = EK_FLASH_BASE,
121 .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
122 .flags = IORESOURCE_MEM,
123};
124
125static struct platform_device ek_flash = {
126 .name = "physmap-flash",
127 .id = 0,
128 .dev = {
129 .platform_data = &ek_flash_data,
130 },
131 .resource = &ek_flash_resource,
132 .num_resources = 1,
133};
134
135
136static void __init ek_board_init(void)
137{
138 /* Serial */
139 at91_add_device_serial();
140 /* Ethernet */
141 at91_add_device_eth(&ek_eth_data);
142 /* USB Host */
143 at91_add_device_usbh(&ek_usbh_data);
144 /* USB Device */
145 at91_add_device_udc(&ek_udc_data);
146 at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
147 /* I2C */
148 at91_add_device_i2c();
149 /* SPI */
150 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
151#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
152 /* DataFlash card */
153 at91_set_gpio_output(AT91_PIN_PB22, 0);
154#else
155 /* MMC */
156 at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
157 at91_add_device_mmc(&ek_mmc_data);
158#endif
159 /* NOR Flash */
160 platform_device_register(&ek_flash);
161 /* VGA */
162// ek_add_device_video();
163}
164
165MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
166 /* Maintainer: SAN People/Atmel */
167 .phys_io = AT91_BASE_SYS,
168 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
169 .boot_params = AT91_SDRAM_BASE + 0x100,
170 .timer = &at91rm9200_timer,
171 .map_io = ek_map_io,
172 .init_irq = ek_init_irq,
173 .init_machine = ek_board_init,
174MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
new file mode 100644
index 000000000000..c77d84ce9cae
--- /dev/null
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -0,0 +1,109 @@
1/*
2 * linux/arch/arm/mach-at91/board-kafa.c
3 *
4 * Copyright (C) 2006 Sperry-Sun
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#include <linux/types.h>
22#include <linux/init.h>
23#include <linux/mm.h>
24#include <linux/module.h>
25#include <linux/platform_device.h>
26
27#include <asm/hardware.h>
28#include <asm/setup.h>
29#include <asm/mach-types.h>
30#include <asm/irq.h>
31
32#include <asm/mach/arch.h>
33#include <asm/mach/map.h>
34#include <asm/mach/irq.h>
35
36#include <asm/arch/board.h>
37#include <asm/arch/gpio.h>
38
39#include "generic.h"
40
41
42/*
43 * Serial port configuration.
44 * 0 .. 3 = USART0 .. USART3
45 * 4 = DBGU
46 */
47static struct at91_uart_config __initdata kafa_uart_config = {
48 .console_tty = 0, /* ttyS0 */
49 .nr_tty = 2,
50 .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
51};
52
53static void __init kafa_map_io(void)
54{
55 /* Initialize processor: 18.432 MHz crystal */
56 at91rm9200_initialize(18432000, AT91RM9200_PQFP);
57
58 /* Set up the LEDs */
59 at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
60
61 /* Setup the serial ports and console */
62 at91_init_serial(&kafa_uart_config);
63}
64
65static void __init kafa_init_irq(void)
66{
67 at91rm9200_init_interrupts(NULL);
68}
69
70static struct at91_eth_data __initdata kafa_eth_data = {
71 .phy_irq_pin = AT91_PIN_PC4,
72 .is_rmii = 0,
73};
74
75static struct at91_usbh_data __initdata kafa_usbh_data = {
76 .ports = 1,
77};
78
79static struct at91_udc_data __initdata kafa_udc_data = {
80 .vbus_pin = AT91_PIN_PB6,
81 .pullup_pin = AT91_PIN_PB7,
82};
83
84static void __init kafa_board_init(void)
85{
86 /* Serial */
87 at91_add_device_serial();
88 /* Ethernet */
89 at91_add_device_eth(&kafa_eth_data);
90 /* USB Host */
91 at91_add_device_usbh(&kafa_usbh_data);
92 /* USB Device */
93 at91_add_device_udc(&kafa_udc_data);
94 /* I2C */
95 at91_add_device_i2c();
96 /* SPI */
97 at91_add_device_spi(NULL, 0);
98}
99
100MACHINE_START(KAFA, "Sperry-Sun KAFA")
101 /* Maintainer: Sergei Sharonov */
102 .phys_io = AT91_BASE_SYS,
103 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
104 .boot_params = AT91_SDRAM_BASE + 0x100,
105 .timer = &at91rm9200_timer,
106 .map_io = kafa_map_io,
107 .init_irq = kafa_init_irq,
108 .init_machine = kafa_board_init,
109MACHINE_END
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
new file mode 100644
index 000000000000..17e68f5efb13
--- /dev/null
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -0,0 +1,143 @@
1/*
2 * linux/arch/arm/mach-at91/board-kb9202.c
3 *
4 * Copyright (c) 2005 kb_admin
5 * KwikByte, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27
28#include <asm/hardware.h>
29#include <asm/setup.h>
30#include <asm/mach-types.h>
31#include <asm/irq.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/map.h>
35#include <asm/mach/irq.h>
36
37#include <asm/arch/board.h>
38#include <asm/arch/gpio.h>
39
40#include "generic.h"
41
42
43/*
44 * Serial port configuration.
45 * 0 .. 3 = USART0 .. USART3
46 * 4 = DBGU
47 */
48static struct at91_uart_config __initdata kb9202_uart_config = {
49 .console_tty = 0, /* ttyS0 */
50 .nr_tty = 3,
51 .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
52};
53
54static void __init kb9202_map_io(void)
55{
56 /* Initialize processor: 10 MHz crystal */
57 at91rm9200_initialize(10000000, AT91RM9200_PQFP);
58
59 /* Set up the LEDs */
60 at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
61
62 /* Setup the serial ports and console */
63 at91_init_serial(&kb9202_uart_config);
64}
65
66static void __init kb9202_init_irq(void)
67{
68 at91rm9200_init_interrupts(NULL);
69}
70
71static struct at91_eth_data __initdata kb9202_eth_data = {
72 .phy_irq_pin = AT91_PIN_PB29,
73 .is_rmii = 0,
74};
75
76static struct at91_usbh_data __initdata kb9202_usbh_data = {
77 .ports = 1,
78};
79
80static struct at91_udc_data __initdata kb9202_udc_data = {
81 .vbus_pin = AT91_PIN_PB24,
82 .pullup_pin = AT91_PIN_PB22,
83};
84
85static struct at91_mmc_data __initdata kb9202_mmc_data = {
86 .det_pin = AT91_PIN_PB2,
87 .slot_b = 0,
88 .wire4 = 1,
89};
90
91static struct mtd_partition __initdata kb9202_nand_partition[] = {
92 {
93 .name = "nand_fs",
94 .offset = 0,
95 .size = MTDPART_SIZ_FULL,
96 },
97};
98
99static struct mtd_partition *nand_partitions(int size, int *num_partitions)
100{
101 *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
102 return kb9202_nand_partition;
103}
104
105static struct at91_nand_data __initdata kb9202_nand_data = {
106 .ale = 22,
107 .cle = 21,
108 // .det_pin = ... not there
109 .rdy_pin = AT91_PIN_PC29,
110 .enable_pin = AT91_PIN_PC28,
111 .partition_info = nand_partitions,
112};
113
114static void __init kb9202_board_init(void)
115{
116 /* Serial */
117 at91_add_device_serial();
118 /* Ethernet */
119 at91_add_device_eth(&kb9202_eth_data);
120 /* USB Host */
121 at91_add_device_usbh(&kb9202_usbh_data);
122 /* USB Device */
123 at91_add_device_udc(&kb9202_udc_data);
124 /* MMC */
125 at91_add_device_mmc(&kb9202_mmc_data);
126 /* I2C */
127 at91_add_device_i2c();
128 /* SPI */
129 at91_add_device_spi(NULL, 0);
130 /* NAND */
131 at91_add_device_nand(&kb9202_nand_data);
132}
133
134MACHINE_START(KB9200, "KB920x")
135 /* Maintainer: KwikByte, Inc. */
136 .phys_io = AT91_BASE_SYS,
137 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
138 .boot_params = AT91_SDRAM_BASE + 0x100,
139 .timer = &at91rm9200_timer,
140 .map_io = kb9202_map_io,
141 .init_irq = kb9202_init_irq,
142 .init_machine = kb9202_board_init,
143MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
new file mode 100644
index 000000000000..6ae272d224e5
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -0,0 +1,202 @@
1/*
2 * linux/arch/arm/mach-at91/board-ek.c
3 *
4 * Copyright (C) 2005 SAN People
5 * Copyright (C) 2006 Atmel
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/spi/spi.h>
28
29#include <asm/hardware.h>
30#include <asm/setup.h>
31#include <asm/mach-types.h>
32#include <asm/irq.h>
33
34#include <asm/mach/arch.h>
35#include <asm/mach/map.h>
36#include <asm/mach/irq.h>
37
38#include <asm/arch/board.h>
39#include <asm/arch/gpio.h>
40#include <asm/arch/at91sam926x_mc.h>
41
42#include "generic.h"
43
44
45/*
46 * Serial port configuration.
47 * 0 .. 5 = USART0 .. USART5
48 * 6 = DBGU
49 */
50static struct at91_uart_config __initdata ek_uart_config = {
51 .console_tty = 0, /* ttyS0 */
52 .nr_tty = 3,
53 .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
54};
55
56static void __init ek_map_io(void)
57{
58 /* Initialize processor: 18.432 MHz crystal */
59 at91sam9260_initialize(18432000);
60
61 /* Setup the serial ports and console */
62 at91_init_serial(&ek_uart_config);
63}
64
65static void __init ek_init_irq(void)
66{
67 at91sam9260_init_interrupts(NULL);
68}
69
70
71/*
72 * USB Host port
73 */
74static struct at91_usbh_data __initdata ek_usbh_data = {
75 .ports = 2,
76};
77
78/*
79 * USB Device port
80 */
81static struct at91_udc_data __initdata ek_udc_data = {
82 .vbus_pin = AT91_PIN_PC5,
83 .pullup_pin = 0, /* pull-up driven by UDC */
84};
85
86
87/*
88 * SPI devices.
89 */
90static struct spi_board_info ek_spi_devices[] = {
91#if !defined(CONFIG_MMC_AT91)
92 { /* DataFlash chip */
93 .modalias = "mtd_dataflash",
94 .chip_select = 1,
95 .max_speed_hz = 15 * 1000 * 1000,
96 .bus_num = 0,
97 },
98#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
99 { /* DataFlash card */
100 .modalias = "mtd_dataflash",
101 .chip_select = 0,
102 .max_speed_hz = 15 * 1000 * 1000,
103 .bus_num = 0,
104 },
105#endif
106#endif
107#if defined(CONFIG_SND_AT73C213)
108 { /* AT73C213 DAC */
109 .modalias = "snd_at73c213",
110 .chip_select = 0,
111 .max_speed_hz = 10 * 1000 * 1000,
112 .bus_num = 1,
113 },
114#endif
115};
116
117
118/*
119 * MACB Ethernet device
120 */
121static struct __initdata at91_eth_data ek_macb_data = {
122 .phy_irq_pin = AT91_PIN_PA7,
123 .is_rmii = 1,
124};
125
126
127/*
128 * NAND flash
129 */
130static struct mtd_partition __initdata ek_nand_partition[] = {
131 {
132 .name = "Partition 1",
133 .offset = 0,
134 .size = 256 * 1024,
135 },
136 {
137 .name = "Partition 2",
138 .offset = 256 * 1024,
139 .size = MTDPART_SIZ_FULL,
140 },
141};
142
143static struct mtd_partition *nand_partitions(int size, int *num_partitions)
144{
145 *num_partitions = ARRAY_SIZE(ek_nand_partition);
146 return ek_nand_partition;
147}
148
149static struct at91_nand_data __initdata ek_nand_data = {
150 .ale = 21,
151 .cle = 22,
152// .det_pin = ... not connected
153 .rdy_pin = AT91_PIN_PC13,
154 .enable_pin = AT91_PIN_PC14,
155 .partition_info = nand_partitions,
156#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
157 .bus_width_16 = 1,
158#else
159 .bus_width_16 = 0,
160#endif
161};
162
163
164/*
165 * MCI (SD/MMC)
166 */
167static struct at91_mmc_data __initdata ek_mmc_data = {
168 .slot_b = 1,
169 .wire4 = 1,
170// .det_pin = ... not connected
171// .wp_pin = ... not connected
172// .vcc_pin = ... not connected
173};
174
175static void __init ek_board_init(void)
176{
177 /* Serial */
178 at91_add_device_serial();
179 /* USB Host */
180 at91_add_device_usbh(&ek_usbh_data);
181 /* USB Device */
182 at91_add_device_udc(&ek_udc_data);
183 /* SPI */
184 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
185 /* NAND */
186 at91_add_device_nand(&ek_nand_data);
187 /* Ethernet */
188 at91_add_device_eth(&ek_macb_data);
189 /* MMC */
190 at91_add_device_mmc(&ek_mmc_data);
191}
192
193MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
194 /* Maintainer: Atmel */
195 .phys_io = AT91_BASE_SYS,
196 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
197 .boot_params = AT91_SDRAM_BASE + 0x100,
198 .timer = &at91sam926x_timer,
199 .map_io = ek_map_io,
200 .init_irq = ek_init_irq,
201 .init_machine = ek_board_init,
202MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
new file mode 100644
index 000000000000..25d626348e6d
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -0,0 +1,259 @@
1/*
2 * linux/arch/arm/mach-at91/board-ek.c
3 *
4 * Copyright (C) 2005 SAN People
5 * Copyright (C) 2006 Atmel
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 */
21
22#include <linux/types.h>
23#include <linux/init.h>
24#include <linux/mm.h>
25#include <linux/module.h>
26#include <linux/platform_device.h>
27#include <linux/spi/spi.h>
28#include <linux/dm9000.h>
29
30#include <asm/hardware.h>
31#include <asm/setup.h>
32#include <asm/mach-types.h>
33#include <asm/irq.h>
34
35#include <asm/mach/arch.h>
36#include <asm/mach/map.h>
37#include <asm/mach/irq.h>
38
39#include <asm/arch/board.h>
40#include <asm/arch/gpio.h>
41#include <asm/arch/at91sam926x_mc.h>
42
43#include "generic.h"
44
45
46/*
47 * Serial port configuration.
48 * 0 .. 2 = USART0 .. USART2
49 * 3 = DBGU
50 */
51static struct at91_uart_config __initdata ek_uart_config = {
52 .console_tty = 0, /* ttyS0 */
53 .nr_tty = 1,
54 .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
55};
56
57static void __init ek_map_io(void)
58{
59 /* Initialize processor: 18.432 MHz crystal */
60 at91sam9261_initialize(18432000);
61
62 /* Setup the serial ports and console */
63 at91_init_serial(&ek_uart_config);
64}
65
66static void __init ek_init_irq(void)
67{
68 at91sam9261_init_interrupts(NULL);
69}
70
71
72/*
73 * DM9000 ethernet device
74 */
75#if defined(CONFIG_DM9000)
76static struct resource at91sam9261_dm9000_resource[] = {
77 [0] = {
78 .start = AT91_CHIPSELECT_2,
79 .end = AT91_CHIPSELECT_2 + 3,
80 .flags = IORESOURCE_MEM
81 },
82 [1] = {
83 .start = AT91_CHIPSELECT_2 + 0x44,
84 .end = AT91_CHIPSELECT_2 + 0xFF,
85 .flags = IORESOURCE_MEM
86 },
87 [2] = {
88 .start = AT91_PIN_PC11,
89 .end = AT91_PIN_PC11,
90 .flags = IORESOURCE_IRQ
91 }
92};
93
94static struct dm9000_plat_data dm9000_platdata = {
95 .flags = DM9000_PLATF_16BITONLY,
96};
97
98static struct platform_device at91sam9261_dm9000_device = {
99 .name = "dm9000",
100 .id = 0,
101 .num_resources = ARRAY_SIZE(at91sam9261_dm9000_resource),
102 .resource = at91sam9261_dm9000_resource,
103 .dev = {
104 .platform_data = &dm9000_platdata,
105 }
106};
107
108static void __init ek_add_device_dm9000(void)
109{
110 /*
111 * Configure Chip-Select 2 on SMC for the DM9000.
112 * Note: These timings were calculated for MASTER_CLOCK = 100000000
113 * according to the DM9000 timings.
114 */
115 at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
116 at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
117 at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
118 at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
119
120 /* Configure Reset signal as output */
121 at91_set_gpio_output(AT91_PIN_PC10, 0);
122
123 /* Configure Interrupt pin as input, no pull-up */
124 at91_set_gpio_input(AT91_PIN_PC11, 0);
125
126 platform_device_register(&at91sam9261_dm9000_device);
127}
128#else
129static void __init ek_add_device_dm9000(void) {}
130#endif /* CONFIG_DM9000 */
131
132
133/*
134 * USB Host Port
135 */
136static struct at91_usbh_data __initdata ek_usbh_data = {
137 .ports = 2,
138};
139
140
141/*
142 * USB Device Port
143 */
144static struct at91_udc_data __initdata ek_udc_data = {
145 .vbus_pin = AT91_PIN_PB29,
146 .pullup_pin = 0, /* pull-up driven by UDC */
147};
148
149
150/*
151 * MCI (SD/MMC)
152 */
153static struct at91_mmc_data __initdata ek_mmc_data = {
154 .wire4 = 1,
155// .det_pin = ... not connected
156// .wp_pin = ... not connected
157// .vcc_pin = ... not connected
158};
159
160
161/*
162 * NAND flash
163 */
164static struct mtd_partition __initdata ek_nand_partition[] = {
165 {
166 .name = "Partition 1",
167 .offset = 0,
168 .size = 256 * 1024,
169 },
170 {
171 .name = "Partition 2",
172 .offset = 256 * 1024 ,
173 .size = MTDPART_SIZ_FULL,
174 },
175};
176
177static struct mtd_partition *nand_partitions(int size, int *num_partitions)
178{
179 *num_partitions = ARRAY_SIZE(ek_nand_partition);
180 return ek_nand_partition;
181}
182
183static struct at91_nand_data __initdata ek_nand_data = {
184 .ale = 22,
185 .cle = 21,
186// .det_pin = ... not connected
187 .rdy_pin = AT91_PIN_PC15,
188 .enable_pin = AT91_PIN_PC14,
189 .partition_info = nand_partitions,
190#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
191 .bus_width_16 = 1,
192#else
193 .bus_width_16 = 0,
194#endif
195};
196
197/*
198 * SPI devices
199 */
200static struct spi_board_info ek_spi_devices[] = {
201 { /* DataFlash chip */
202 .modalias = "mtd_dataflash",
203 .chip_select = 0,
204 .max_speed_hz = 15 * 1000 * 1000,
205 .bus_num = 0,
206 },
207#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
208 { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
209 .modalias = "mtd_dataflash",
210 .chip_select = 3,
211 .max_speed_hz = 15 * 1000 * 1000,
212 .bus_num = 0,
213 },
214#elif defined(CONFIG_SND_AT73C213)
215 { /* AT73C213 DAC */
216 .modalias = "snd_at73c213",
217 .chip_select = 3,
218 .max_speed_hz = 10 * 1000 * 1000,
219 .bus_num = 0,
220 },
221#endif
222};
223
224
225static void __init ek_board_init(void)
226{
227 /* Serial */
228 at91_add_device_serial();
229 /* USB Host */
230 at91_add_device_usbh(&ek_usbh_data);
231 /* USB Device */
232 at91_add_device_udc(&ek_udc_data);
233 /* I2C */
234 at91_add_device_i2c();
235 /* NAND */
236 at91_add_device_nand(&ek_nand_data);
237 /* DM9000 ethernet */
238 ek_add_device_dm9000();
239
240 /* spi0 and mmc/sd share the same PIO pins */
241#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
242 /* SPI */
243 at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
244#else
245 /* MMC */
246 at91_add_device_mmc(&ek_mmc_data);
247#endif
248}
249
250MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
251 /* Maintainer: Atmel */
252 .phys_io = AT91_BASE_SYS,
253 .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
254 .boot_params = AT91_SDRAM_BASE + 0x100,
255 .timer = &at91sam926x_timer,
256 .map_io = ek_map_io,
257 .init_irq = ek_init_irq,
258 .init_machine = ek_board_init,
259MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
new file mode 100644
index 000000000000..baab095f6e32
--- /dev/null
+++ b/arch/arm/mach-at91/clock.c
@@ -0,0 +1,644 @@
1/*
2 * linux/arch/arm/mach-at91/clock.c
3 *
4 * Copyright (C) 2005 David Brownell
5 * Copyright (C) 2005 Ivan Kokshaysky
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 */
12
13#include <linux/module.h>
14#include <linux/kernel.h>
15#include <linux/init.h>
16#include <linux/fs.h>
17#include <linux/debugfs.h>
18#include <linux/seq_file.h>
19#include <linux/list.h>
20#include <linux/errno.h>
21#include <linux/err.h>
22#include <linux/spinlock.h>
23#include <linux/delay.h>
24#include <linux/clk.h>
25
26#include <asm/semaphore.h>
27#include <asm/io.h>
28#include <asm/mach-types.h>
29
30#include <asm/hardware.h>
31#include <asm/arch/at91_pmc.h>
32#include <asm/arch/cpu.h>
33
34#include "clock.h"
35
36
37/*
38 * There's a lot more which can be done with clocks, including cpufreq
39 * integration, slow clock mode support (for system suspend), letting
40 * PLLB be used at other rates (on boards that don't need USB), etc.
41 */
42
43#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
44#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
45#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL)
46#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
47
48
49static LIST_HEAD(clocks);
50static DEFINE_SPINLOCK(clk_lock);
51
52static u32 at91_pllb_usb_init;
53
54/*
55 * Four primary clock sources: two crystal oscillators (32K, main), and
56 * two PLLs. PLLA usually runs the master clock; and PLLB must run at
57 * 48 MHz (unless no USB function clocks are needed). The main clock and
58 * both PLLs are turned off to run in "slow clock mode" (system suspend).
59 */
60static struct clk clk32k = {
61 .name = "clk32k",
62 .rate_hz = AT91_SLOW_CLOCK,
63 .users = 1, /* always on */
64 .id = 0,
65 .type = CLK_TYPE_PRIMARY,
66};
67static struct clk main_clk = {
68 .name = "main",
69 .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */
70 .id = 1,
71 .type = CLK_TYPE_PRIMARY,
72};
73static struct clk plla = {
74 .name = "plla",
75 .parent = &main_clk,
76 .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */
77 .id = 2,
78 .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
79};
80
81static void pllb_mode(struct clk *clk, int is_on)
82{
83 u32 value;
84
85 if (is_on) {
86 is_on = AT91_PMC_LOCKB;
87 value = at91_pllb_usb_init;
88 } else
89 value = 0;
90
91 // REVISIT: Add work-around for AT91RM9200 Errata #26 ?
92 at91_sys_write(AT91_CKGR_PLLBR, value);
93
94 do {
95 cpu_relax();
96 } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
97}
98
99static struct clk pllb = {
100 .name = "pllb",
101 .parent = &main_clk,
102 .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */
103 .mode = pllb_mode,
104 .id = 3,
105 .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
106};
107
108static void pmc_sys_mode(struct clk *clk, int is_on)
109{
110 if (is_on)
111 at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
112 else
113 at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
114}
115
116/* USB function clocks (PLLB must be 48 MHz) */
117static struct clk udpck = {
118 .name = "udpck",
119 .parent = &pllb,
120 .mode = pmc_sys_mode,
121};
122static struct clk uhpck = {
123 .name = "uhpck",
124 .parent = &pllb,
125 .mode = pmc_sys_mode,
126};
127
128
129/*
130 * The master clock is divided from the CPU clock (by 1-4). It's used for
131 * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
132 * (e.g baud rate generation). It's sourced from one of the primary clocks.
133 */
134static struct clk mck = {
135 .name = "mck",
136 .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */
137};
138
139static void pmc_periph_mode(struct clk *clk, int is_on)
140{
141 if (is_on)
142 at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
143 else
144 at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
145}
146
147static struct clk __init *at91_css_to_clk(unsigned long css)
148{
149 switch (css) {
150 case AT91_PMC_CSS_SLOW:
151 return &clk32k;
152 case AT91_PMC_CSS_MAIN:
153 return &main_clk;
154 case AT91_PMC_CSS_PLLA:
155 return &plla;
156 case AT91_PMC_CSS_PLLB:
157 return &pllb;
158 }
159
160 return NULL;
161}
162
163/*
164 * Associate a particular clock with a function (eg, "uart") and device.
165 * The drivers can then request the same 'function' with several different
166 * devices and not care about which clock name to use.
167 */
168void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
169{
170 struct clk *clk = clk_get(NULL, id);
171
172 if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
173 return;
174
175 clk->function = func;
176 clk->dev = dev;
177}
178
179/* clocks cannot be de-registered no refcounting necessary */
180struct clk *clk_get(struct device *dev, const char *id)
181{
182 struct clk *clk;
183
184 list_for_each_entry(clk, &clocks, node) {
185 if (strcmp(id, clk->name) == 0)
186 return clk;
187 if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
188 return clk;
189 }
190
191 return ERR_PTR(-ENOENT);
192}
193EXPORT_SYMBOL(clk_get);
194
195void clk_put(struct clk *clk)
196{
197}
198EXPORT_SYMBOL(clk_put);
199
200static void __clk_enable(struct clk *clk)
201{
202 if (clk->parent)
203 __clk_enable(clk->parent);
204 if (clk->users++ == 0 && clk->mode)
205 clk->mode(clk, 1);
206}
207
208int clk_enable(struct clk *clk)
209{
210 unsigned long flags;
211
212 spin_lock_irqsave(&clk_lock, flags);
213 __clk_enable(clk);
214 spin_unlock_irqrestore(&clk_lock, flags);
215 return 0;
216}
217EXPORT_SYMBOL(clk_enable);
218
219static void __clk_disable(struct clk *clk)
220{
221 BUG_ON(clk->users == 0);
222 if (--clk->users == 0 && clk->mode)
223 clk->mode(clk, 0);
224 if (clk->parent)
225 __clk_disable(clk->parent);
226}
227
228void clk_disable(struct clk *clk)
229{
230 unsigned long flags;
231
232 spin_lock_irqsave(&clk_lock, flags);
233 __clk_disable(clk);
234 spin_unlock_irqrestore(&clk_lock, flags);
235}
236EXPORT_SYMBOL(clk_disable);
237
238unsigned long clk_get_rate(struct clk *clk)
239{
240 unsigned long flags;
241 unsigned long rate;
242
243 spin_lock_irqsave(&clk_lock, flags);
244 for (;;) {
245 rate = clk->rate_hz;
246 if (rate || !clk->parent)
247 break;
248 clk = clk->parent;
249 }
250 spin_unlock_irqrestore(&clk_lock, flags);
251 return rate;
252}
253EXPORT_SYMBOL(clk_get_rate);
254
255/*------------------------------------------------------------------------*/
256
257#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
258
259/*
260 * For now, only the programmable clocks support reparenting (MCK could
261 * do this too, with care) or rate changing (the PLLs could do this too,
262 * ditto MCK but that's more for cpufreq). Drivers may reparent to get
263 * a better rate match; we don't.
264 */
265
266long clk_round_rate(struct clk *clk, unsigned long rate)
267{
268 unsigned long flags;
269 unsigned prescale;
270 unsigned long actual;
271
272 if (!clk_is_programmable(clk))
273 return -EINVAL;
274 spin_lock_irqsave(&clk_lock, flags);
275
276 actual = clk->parent->rate_hz;
277 for (prescale = 0; prescale < 7; prescale++) {
278 if (actual && actual <= rate)
279 break;
280 actual >>= 1;
281 }
282
283 spin_unlock_irqrestore(&clk_lock, flags);
284 return (prescale < 7) ? actual : -ENOENT;
285}
286EXPORT_SYMBOL(clk_round_rate);
287
288int clk_set_rate(struct clk *clk, unsigned long rate)
289{
290 unsigned long flags;
291 unsigned prescale;
292 unsigned long actual;
293
294 if (!clk_is_programmable(clk))
295 return -EINVAL;
296 if (clk->users)
297 return -EBUSY;
298 spin_lock_irqsave(&clk_lock, flags);
299
300 actual = clk->parent->rate_hz;
301 for (prescale = 0; prescale < 7; prescale++) {
302 if (actual && actual <= rate) {
303 u32 pckr;
304
305 pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
306 pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
307 pckr |= prescale << 2;
308 at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
309 clk->rate_hz = actual;
310 break;
311 }
312 actual >>= 1;
313 }
314
315 spin_unlock_irqrestore(&clk_lock, flags);
316 return (prescale < 7) ? actual : -ENOENT;
317}
318EXPORT_SYMBOL(clk_set_rate);
319
320struct clk *clk_get_parent(struct clk *clk)
321{
322 return clk->parent;
323}
324EXPORT_SYMBOL(clk_get_parent);
325
326int clk_set_parent(struct clk *clk, struct clk *parent)
327{
328 unsigned long flags;
329
330 if (clk->users)
331 return -EBUSY;
332 if (!clk_is_primary(parent) || !clk_is_programmable(clk))
333 return -EINVAL;
334 spin_lock_irqsave(&clk_lock, flags);
335
336 clk->rate_hz = parent->rate_hz;
337 clk->parent = parent;
338 at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
339
340 spin_unlock_irqrestore(&clk_lock, flags);
341 return 0;
342}
343EXPORT_SYMBOL(clk_set_parent);
344
345/* establish PCK0..PCK3 parentage and rate */
346static void init_programmable_clock(struct clk *clk)
347{
348 struct clk *parent;
349 u32 pckr;
350
351 pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
352 parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
353 clk->parent = parent;
354 clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
355}
356
357#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
358
359/*------------------------------------------------------------------------*/
360
361#ifdef CONFIG_DEBUG_FS
362
363static int at91_clk_show(struct seq_file *s, void *unused)
364{
365 u32 scsr, pcsr, sr;
366 struct clk *clk;
367 unsigned i;
368
369 seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
370 seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
371
372 seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
373 seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
374 seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
375 seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
376
377 seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
378 for (i = 0; i < 4; i++)
379 seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
380 seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
381
382 seq_printf(s, "\n");
383
384 list_for_each_entry(clk, &clocks, node) {
385 char *state;
386
387 if (clk->mode == pmc_sys_mode)
388 state = (scsr & clk->pmc_mask) ? "on" : "off";
389 else if (clk->mode == pmc_periph_mode)
390 state = (pcsr & clk->pmc_mask) ? "on" : "off";
391 else if (clk->pmc_mask)
392 state = (sr & clk->pmc_mask) ? "on" : "off";
393 else if (clk == &clk32k || clk == &main_clk)
394 state = "on";
395 else
396 state = "";
397
398 seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
399 clk->name, clk->users, state, clk_get_rate(clk),
400 clk->parent ? clk->parent->name : "");
401 }
402 return 0;
403}
404
405static int at91_clk_open(struct inode *inode, struct file *file)
406{
407 return single_open(file, at91_clk_show, NULL);
408}
409
410static struct file_operations at91_clk_operations = {
411 .open = at91_clk_open,
412 .read = seq_read,
413 .llseek = seq_lseek,
414 .release = single_release,
415};
416
417static int __init at91_clk_debugfs_init(void)
418{
419 /* /sys/kernel/debug/at91_clk */
420 (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
421
422 return 0;
423}
424postcore_initcall(at91_clk_debugfs_init);
425
426#endif
427
428/*------------------------------------------------------------------------*/
429
430/* Register a new clock */
431int __init clk_register(struct clk *clk)
432{
433 if (clk_is_peripheral(clk)) {
434 clk->parent = &mck;
435 clk->mode = pmc_periph_mode;
436 list_add_tail(&clk->node, &clocks);
437 }
438 else if (clk_is_sys(clk)) {
439 clk->parent = &mck;
440 clk->mode = pmc_sys_mode;
441
442 list_add_tail(&clk->node, &clocks);
443 }
444#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
445 else if (clk_is_programmable(clk)) {
446 clk->mode = pmc_sys_mode;
447 init_programmable_clock(clk);
448 list_add_tail(&clk->node, &clocks);
449 }
450#endif
451
452 return 0;
453}
454
455
456/*------------------------------------------------------------------------*/
457
458static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
459{
460 unsigned mul, div;
461
462 div = reg & 0xff;
463 mul = (reg >> 16) & 0x7ff;
464 if (div && mul) {
465 freq /= div;
466 freq *= mul + 1;
467 } else
468 freq = 0;
469
470 return freq;
471}
472
473static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
474{
475 if (pll == &pllb && (reg & AT91_PMC_USB96M))
476 return freq / 2;
477 else
478 return freq;
479}
480
481static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
482{
483 unsigned i, div = 0, mul = 0, diff = 1 << 30;
484 unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
485
486 /* PLL output max 240 MHz (or 180 MHz per errata) */
487 if (out_freq > 240000000)
488 goto fail;
489
490 for (i = 1; i < 256; i++) {
491 int diff1;
492 unsigned input, mul1;
493
494 /*
495 * PLL input between 1MHz and 32MHz per spec, but lower
496 * frequences seem necessary in some cases so allow 100K.
497 */
498 input = main_freq / i;
499 if (input < 100000)
500 continue;
501 if (input > 32000000)
502 continue;
503
504 mul1 = out_freq / input;
505 if (mul1 > 2048)
506 continue;
507 if (mul1 < 2)
508 goto fail;
509
510 diff1 = out_freq - input * mul1;
511 if (diff1 < 0)
512 diff1 = -diff1;
513 if (diff > diff1) {
514 diff = diff1;
515 div = i;
516 mul = mul1;
517 if (diff == 0)
518 break;
519 }
520 }
521 if (i == 256 && diff > (out_freq >> 5))
522 goto fail;
523 return ret | ((mul - 1) << 16) | div;
524fail:
525 return 0;
526}
527
528/*
529 * Several unused clocks may be active. Turn them off.
530 */
531static void __init at91_periphclk_reset(void)
532{
533 unsigned long reg;
534 struct clk *clk;
535
536 reg = at91_sys_read(AT91_PMC_PCSR);
537
538 list_for_each_entry(clk, &clocks, node) {
539 if (clk->mode != pmc_periph_mode)
540 continue;
541
542 if (clk->users > 0)
543 reg &= ~clk->pmc_mask;
544 }
545
546 at91_sys_write(AT91_PMC_PCDR, reg);
547}
548
549static struct clk *const standard_pmc_clocks[] __initdata = {
550 /* four primary clocks */
551 &clk32k,
552 &main_clk,
553 &plla,
554 &pllb,
555
556 /* PLLB children (USB) */
557 &udpck,
558 &uhpck,
559
560 /* MCK */
561 &mck
562};
563
564int __init at91_clock_init(unsigned long main_clock)
565{
566 unsigned tmp, freq, mckr;
567 int i;
568
569 /*
570 * When the bootloader initialized the main oscillator correctly,
571 * there's no problem using the cycle counter. But if it didn't,
572 * or when using oscillator bypass mode, we must be told the speed
573 * of the main clock.
574 */
575 if (!main_clock) {
576 do {
577 tmp = at91_sys_read(AT91_CKGR_MCFR);
578 } while (!(tmp & AT91_PMC_MAINRDY));
579 main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
580 }
581 main_clk.rate_hz = main_clock;
582
583 /* report if PLLA is more than mildly overclocked */
584 plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
585 if (plla.rate_hz > 209000000)
586 pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
587
588 /*
589 * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
590 * disable 48MHz clock during usb peripheral suspend.
591 *
592 * REVISIT: assumes MCK doesn't derive from PLLB!
593 */
594 at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
595 pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
596 if (cpu_is_at91rm9200()) {
597 uhpck.pmc_mask = AT91RM9200_PMC_UHP;
598 udpck.pmc_mask = AT91RM9200_PMC_UDP;
599 at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
600 at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
601 } else if (cpu_is_at91sam9260()) {
602 uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
603 udpck.pmc_mask = AT91SAM926x_PMC_UDP;
604 at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
605 } else if (cpu_is_at91sam9261()) {
606 uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
607 udpck.pmc_mask = AT91SAM926x_PMC_UDP;
608 at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
609 }
610 at91_sys_write(AT91_CKGR_PLLBR, 0);
611
612 udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
613 uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
614
615 /*
616 * MCK and CPU derive from one of those primary clocks.
617 * For now, assume this parentage won't change.
618 */
619 mckr = at91_sys_read(AT91_PMC_MCKR);
620 mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
621 freq = mck.parent->rate_hz;
622 freq /= (1 << ((mckr >> 2) & 3)); /* prescale */
623 mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */
624
625 /* Register the PMC's standard clocks */
626 for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
627 list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
628
629 /* MCK and CPU clock are "always on" */
630 clk_enable(&mck);
631
632 printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
633 freq / 1000000, (unsigned) mck.rate_hz / 1000000,
634 (unsigned) main_clock / 1000000,
635 ((unsigned) main_clock % 1000000) / 1000);
636
637 /* disable all programmable clocks */
638 at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
639
640 /* disable all other unused peripheral clocks */
641 at91_periphclk_reset();
642
643 return 0;
644}
diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h
new file mode 100644
index 000000000000..1ba3b95ff359
--- /dev/null
+++ b/arch/arm/mach-at91/clock.h
@@ -0,0 +1,31 @@
1/*
2 * linux/arch/arm/mach-at91/clock.h
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#define CLK_TYPE_PRIMARY 0x1
10#define CLK_TYPE_PLL 0x2
11#define CLK_TYPE_PROGRAMMABLE 0x4
12#define CLK_TYPE_PERIPHERAL 0x8
13#define CLK_TYPE_SYSTEM 0x10
14
15
16struct clk {
17 struct list_head node;
18 const char *name; /* unique clock name */
19 const char *function; /* function of the clock */
20 struct device *dev; /* device associated with function */
21 unsigned long rate_hz;
22 struct clk *parent;
23 u32 pmc_mask;
24 void (*mode)(struct clk *, int);
25 unsigned id:2; /* PCK0..3, or 32k/main/a/b */
26 unsigned type; /* clock type */
27 u16 users;
28};
29
30
31extern int __init clk_register(struct clk *clk);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
new file mode 100644
index 000000000000..10ee37bf6d4d
--- /dev/null
+++ b/arch/arm/mach-at91/generic.h
@@ -0,0 +1,49 @@
1/*
2 * linux/arch/arm/mach-at91/generic.h
3 *
4 * Copyright (C) 2005 David Brownell
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11 /* Processors */
12extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
13extern void __init at91sam9260_initialize(unsigned long main_clock);
14extern void __init at91sam9261_initialize(unsigned long main_clock);
15
16 /* Interrupts */
17extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
18extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
19extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
20extern void __init at91_aic_init(unsigned int priority[]);
21
22 /* Timer */
23struct sys_timer;
24extern struct sys_timer at91rm9200_timer;
25extern struct sys_timer at91sam926x_timer;
26
27 /* Clocks */
28extern int __init at91_clock_init(unsigned long main_clock);
29struct device;
30extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
31
32 /* Power Management */
33extern void at91_irq_suspend(void);
34extern void at91_irq_resume(void);
35
36 /* GPIO */
37#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
38#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
39
40struct at91_gpio_bank {
41 unsigned short id; /* peripheral ID */
42 unsigned long offset; /* offset from system peripheral base */
43 struct clk *clock; /* associated clock */
44};
45extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
46extern void __init at91_gpio_irq_setup(void);
47
48extern void (*at91_arch_reset)(void);
49extern int at91_extern_irq;
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
new file mode 100644
index 000000000000..9b7495cd555d
--- /dev/null
+++ b/arch/arm/mach-at91/gpio.c
@@ -0,0 +1,414 @@
1/*
2 * linux/arch/arm/mach-at91/gpio.c
3 *
4 * Copyright (C) 2005 HP Labs
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 */
11
12#include <linux/clk.h>
13#include <linux/errno.h>
14#include <linux/interrupt.h>
15#include <linux/irq.h>
16#include <linux/kernel.h>
17#include <linux/list.h>
18#include <linux/module.h>
19
20#include <asm/io.h>
21#include <asm/hardware.h>
22#include <asm/arch/at91_pio.h>
23#include <asm/arch/gpio.h>
24
25#include "generic.h"
26
27
28static struct at91_gpio_bank *gpio;
29static int gpio_banks;
30
31
32static inline void __iomem *pin_to_controller(unsigned pin)
33{
34 void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
35
36 pin -= PIN_BASE;
37 pin /= 32;
38 if (likely(pin < gpio_banks))
39 return sys_base + gpio[pin].offset;
40
41 return NULL;
42}
43
44static inline unsigned pin_to_mask(unsigned pin)
45{
46 pin -= PIN_BASE;
47 return 1 << (pin % 32);
48}
49
50
51/*--------------------------------------------------------------------------*/
52
53/* Not all hardware capabilities are exposed through these calls; they
54 * only encapsulate the most common features and modes. (So if you
55 * want to change signals in groups, do it directly.)
56 *
57 * Bootloaders will usually handle some of the pin multiplexing setup.
58 * The intent is certainly that by the time Linux is fully booted, all
59 * pins should have been fully initialized. These setup calls should
60 * only be used by board setup routines, or possibly in driver probe().
61 *
62 * For bootloaders doing all that setup, these calls could be inlined
63 * as NOPs so Linux won't duplicate any setup code
64 */
65
66
67/*
68 * mux the pin to the "A" internal peripheral role.
69 */
70int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
71{
72 void __iomem *pio = pin_to_controller(pin);
73 unsigned mask = pin_to_mask(pin);
74
75 if (!pio)
76 return -EINVAL;
77
78 __raw_writel(mask, pio + PIO_IDR);
79 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
80 __raw_writel(mask, pio + PIO_ASR);
81 __raw_writel(mask, pio + PIO_PDR);
82 return 0;
83}
84EXPORT_SYMBOL(at91_set_A_periph);
85
86
87/*
88 * mux the pin to the "B" internal peripheral role.
89 */
90int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
91{
92 void __iomem *pio = pin_to_controller(pin);
93 unsigned mask = pin_to_mask(pin);
94
95 if (!pio)
96 return -EINVAL;
97
98 __raw_writel(mask, pio + PIO_IDR);
99 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
100 __raw_writel(mask, pio + PIO_BSR);
101 __raw_writel(mask, pio + PIO_PDR);
102 return 0;
103}
104EXPORT_SYMBOL(at91_set_B_periph);
105
106
107/*
108 * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
109 * configure it for an input.
110 */
111int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
112{
113 void __iomem *pio = pin_to_controller(pin);
114 unsigned mask = pin_to_mask(pin);
115
116 if (!pio)
117 return -EINVAL;
118
119 __raw_writel(mask, pio + PIO_IDR);
120 __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
121 __raw_writel(mask, pio + PIO_ODR);
122 __raw_writel(mask, pio + PIO_PER);
123 return 0;
124}
125EXPORT_SYMBOL(at91_set_gpio_input);
126
127
128/*
129 * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
130 * and configure it for an output.
131 */
132int __init_or_module at91_set_gpio_output(unsigned pin, int value)
133{
134 void __iomem *pio = pin_to_controller(pin);
135 unsigned mask = pin_to_mask(pin);
136
137 if (!pio)
138 return -EINVAL;
139
140 __raw_writel(mask, pio + PIO_IDR);
141 __raw_writel(mask, pio + PIO_PUDR);
142 __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
143 __raw_writel(mask, pio + PIO_OER);
144 __raw_writel(mask, pio + PIO_PER);
145 return 0;
146}
147EXPORT_SYMBOL(at91_set_gpio_output);
148
149
150/*
151 * enable/disable the glitch filter; mostly used with IRQ handling.
152 */
153int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
154{
155 void __iomem *pio = pin_to_controller(pin);
156 unsigned mask = pin_to_mask(pin);
157
158 if (!pio)
159 return -EINVAL;
160 __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
161 return 0;
162}
163EXPORT_SYMBOL(at91_set_deglitch);
164
165/*
166 * enable/disable the multi-driver; This is only valid for output and
167 * allows the output pin to run as an open collector output.
168 */
169int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
170{
171 void __iomem *pio = pin_to_controller(pin);
172 unsigned mask = pin_to_mask(pin);
173
174 if (!pio)
175 return -EINVAL;
176
177 __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
178 return 0;
179}
180EXPORT_SYMBOL(at91_set_multi_drive);
181
182/*--------------------------------------------------------------------------*/
183
184/*
185 * assuming the pin is muxed as a gpio output, set its value.
186 */
187int at91_set_gpio_value(unsigned pin, int value)
188{
189 void __iomem *pio = pin_to_controller(pin);
190 unsigned mask = pin_to_mask(pin);
191
192 if (!pio)
193 return -EINVAL;
194 __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
195 return 0;
196}
197EXPORT_SYMBOL(at91_set_gpio_value);
198
199
200/*
201 * read the pin's value (works even if it's not muxed as a gpio).
202 */
203int at91_get_gpio_value(unsigned pin)
204{
205 void __iomem *pio = pin_to_controller(pin);
206 unsigned mask = pin_to_mask(pin);
207 u32 pdsr;
208
209 if (!pio)
210 return -EINVAL;
211 pdsr = __raw_readl(pio + PIO_PDSR);
212 return (pdsr & mask) != 0;
213}
214EXPORT_SYMBOL(at91_get_gpio_value);
215
216/*--------------------------------------------------------------------------*/
217
218#ifdef CONFIG_PM
219
220static u32 wakeups[MAX_GPIO_BANKS];
221static u32 backups[MAX_GPIO_BANKS];
222
223static int gpio_irq_set_wake(unsigned pin, unsigned state)
224{
225 unsigned mask = pin_to_mask(pin);
226 unsigned bank = (pin - PIN_BASE) / 32;
227
228 if (unlikely(bank >= MAX_GPIO_BANKS))
229 return -EINVAL;
230
231 if (state)
232 wakeups[bank] |= mask;
233 else
234 wakeups[bank] &= ~mask;
235
236 set_irq_wake(gpio[bank].id, state);
237
238 return 0;
239}
240
241void at91_gpio_suspend(void)
242{
243 int i;
244
245 for (i = 0; i < gpio_banks; i++) {
246 u32 pio = gpio[i].offset;
247
248 backups[i] = at91_sys_read(pio + PIO_IMR);
249 at91_sys_write(pio + PIO_IDR, backups[i]);
250 at91_sys_write(pio + PIO_IER, wakeups[i]);
251
252 if (!wakeups[i])
253 clk_disable(gpio[i].clock);
254 else {
255#ifdef CONFIG_PM_DEBUG
256 printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
257#endif
258 }
259 }
260}
261
262void at91_gpio_resume(void)
263{
264 int i;
265
266 for (i = 0; i < gpio_banks; i++) {
267 u32 pio = gpio[i].offset;
268
269 if (!wakeups[i])
270 clk_enable(gpio[i].clock);
271
272 at91_sys_write(pio + PIO_IDR, wakeups[i]);
273 at91_sys_write(pio + PIO_IER, backups[i]);
274 }
275}
276
277#else
278#define gpio_irq_set_wake NULL
279#endif
280
281
282/* Several AIC controller irqs are dispatched through this GPIO handler.
283 * To use any AT91_PIN_* as an externally triggered IRQ, first call
284 * at91_set_gpio_input() then maybe enable its glitch filter.
285 * Then just request_irq() with the pin ID; it works like any ARM IRQ
286 * handler, though it always triggers on rising and falling edges.
287 *
288 * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
289 * configuring them with at91_set_a_periph() or at91_set_b_periph().
290 * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
291 */
292
293static void gpio_irq_mask(unsigned pin)
294{
295 void __iomem *pio = pin_to_controller(pin);
296 unsigned mask = pin_to_mask(pin);
297
298 if (pio)
299 __raw_writel(mask, pio + PIO_IDR);
300}
301
302static void gpio_irq_unmask(unsigned pin)
303{
304 void __iomem *pio = pin_to_controller(pin);
305 unsigned mask = pin_to_mask(pin);
306
307 if (pio)
308 __raw_writel(mask, pio + PIO_IER);
309}
310
311static int gpio_irq_type(unsigned pin, unsigned type)
312{
313 return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
314}
315
316static struct irq_chip gpio_irqchip = {
317 .name = "GPIO",
318 .mask = gpio_irq_mask,
319 .unmask = gpio_irq_unmask,
320 .set_type = gpio_irq_type,
321 .set_wake = gpio_irq_set_wake,
322};
323
324static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
325{
326 unsigned pin;
327 struct irq_desc *gpio;
328 void __iomem *pio;
329 u32 isr;
330
331 pio = get_irq_chip_data(irq);
332
333 /* temporarily mask (level sensitive) parent IRQ */
334 desc->chip->ack(irq);
335 for (;;) {
336 /* reading ISR acks the pending (edge triggered) GPIO interrupt */
337 isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
338 if (!isr)
339 break;
340
341 pin = (unsigned) get_irq_data(irq);
342 gpio = &irq_desc[pin];
343
344 while (isr) {
345 if (isr & 1) {
346 if (unlikely(gpio->depth)) {
347 /*
348 * The core ARM interrupt handler lazily disables IRQs so
349 * another IRQ must be generated before it actually gets
350 * here to be disabled on the GPIO controller.
351 */
352 gpio_irq_mask(pin);
353 }
354 else
355 desc_handle_irq(pin, gpio);
356 }
357 pin++;
358 gpio++;
359 isr >>= 1;
360 }
361 }
362 desc->chip->unmask(irq);
363 /* now it may re-trigger */
364}
365
366/*--------------------------------------------------------------------------*/
367
368/*
369 * Called from the processor-specific init to enable GPIO interrupt support.
370 */
371void __init at91_gpio_irq_setup(void)
372{
373 unsigned pioc, pin;
374
375 for (pioc = 0, pin = PIN_BASE;
376 pioc < gpio_banks;
377 pioc++) {
378 void __iomem *controller;
379 unsigned id = gpio[pioc].id;
380 unsigned i;
381
382 clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
383
384 controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
385 __raw_writel(~0, controller + PIO_IDR);
386
387 set_irq_data(id, (void *) pin);
388 set_irq_chip_data(id, controller);
389
390 for (i = 0; i < 32; i++, pin++) {
391 /*
392 * Can use the "simple" and not "edge" handler since it's
393 * shorter, and the AIC handles interupts sanely.
394 */
395 set_irq_chip(pin, &gpio_irqchip);
396 set_irq_handler(pin, handle_simple_irq);
397 set_irq_flags(pin, IRQF_VALID);
398 }
399
400 set_irq_chained_handler(id, gpio_irq_handler);
401 }
402 pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
403}
404
405/*
406 * Called from the processor-specific init to enable GPIO pin support.
407 */
408void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
409{
410 BUG_ON(nr_banks > MAX_GPIO_BANKS);
411
412 gpio = data;
413 gpio_banks = nr_banks;
414}
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
new file mode 100644
index 000000000000..78a5cdb746dc
--- /dev/null
+++ b/arch/arm/mach-at91/irq.c
@@ -0,0 +1,168 @@
1/*
2 * linux/arch/arm/mach-at91/irq.c
3 *
4 * Copyright (C) 2004 SAN People
5 * Copyright (C) 2004 ATMEL
6 * Copyright (C) Rick Bronson
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 */
22
23#include <linux/init.h>
24#include <linux/module.h>
25#include <linux/mm.h>
26#include <linux/types.h>
27
28#include <asm/hardware.h>
29#include <asm/irq.h>
30#include <asm/mach-types.h>
31#include <asm/setup.h>
32
33#include <asm/mach/arch.h>
34#include <asm/mach/irq.h>
35#include <asm/mach/map.h>
36
37
38static void at91_aic_mask_irq(unsigned int irq)
39{
40 /* Disable interrupt on AIC */
41 at91_sys_write(AT91_AIC_IDCR, 1 << irq);
42}
43
44static void at91_aic_unmask_irq(unsigned int irq)
45{
46 /* Enable interrupt on AIC */
47 at91_sys_write(AT91_AIC_IECR, 1 << irq);
48}
49
50unsigned int at91_extern_irq;
51
52#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
53
54static int at91_aic_set_type(unsigned irq, unsigned type)
55{
56 unsigned int smr, srctype;
57
58 switch (type) {
59 case IRQT_HIGH:
60 srctype = AT91_AIC_SRCTYPE_HIGH;
61 break;
62 case IRQT_RISING:
63 srctype = AT91_AIC_SRCTYPE_RISING;
64 break;
65 case IRQT_LOW:
66 if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
67 srctype = AT91_AIC_SRCTYPE_LOW;
68 else
69 return -EINVAL;
70 break;
71 case IRQT_FALLING:
72 if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
73 srctype = AT91_AIC_SRCTYPE_FALLING;
74 else
75 return -EINVAL;
76 break;
77 default:
78 return -EINVAL;
79 }
80
81 smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
82 at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
83 return 0;
84}
85
86#ifdef CONFIG_PM
87
88static u32 wakeups;
89static u32 backups;
90
91static int at91_aic_set_wake(unsigned irq, unsigned value)
92{
93 if (unlikely(irq >= 32))
94 return -EINVAL;
95
96 if (value)
97 wakeups |= (1 << irq);
98 else
99 wakeups &= ~(1 << irq);
100
101 return 0;
102}
103
104void at91_irq_suspend(void)
105{
106 backups = at91_sys_read(AT91_AIC_IMR);
107 at91_sys_write(AT91_AIC_IDCR, backups);
108 at91_sys_write(AT91_AIC_IECR, wakeups);
109}
110
111void at91_irq_resume(void)
112{
113 at91_sys_write(AT91_AIC_IDCR, wakeups);
114 at91_sys_write(AT91_AIC_IECR, backups);
115}
116
117#else
118#define at91_aic_set_wake NULL
119#endif
120
121static struct irq_chip at91_aic_chip = {
122 .name = "AIC",
123 .ack = at91_aic_mask_irq,
124 .mask = at91_aic_mask_irq,
125 .unmask = at91_aic_unmask_irq,
126 .set_type = at91_aic_set_type,
127 .set_wake = at91_aic_set_wake,
128};
129
130/*
131 * Initialize the AIC interrupt controller.
132 */
133void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
134{
135 unsigned int i;
136
137 /*
138 * The IVR is used by macro get_irqnr_and_base to read and verify.
139 * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
140 */
141 for (i = 0; i < NR_AIC_IRQS; i++) {
142 /* Put irq number in Source Vector Register: */
143 at91_sys_write(AT91_AIC_SVR(i), i);
144 /* Active Low interrupt, with the specified priority */
145 at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
146
147 set_irq_chip(i, &at91_aic_chip);
148 set_irq_handler(i, handle_level_irq);
149 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
150
151 /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
152 if (i < 8)
153 at91_sys_write(AT91_AIC_EOICR, 0);
154 }
155
156 /*
157 * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
158 * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
159 */
160 at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
161
162 /* No debugging in AIC: Debug (Protect) Control Register */
163 at91_sys_write(AT91_AIC_DCR, 0);
164
165 /* Disable and clear all interrupts initially */
166 at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
167 at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
168}
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
new file mode 100644
index 000000000000..1a333730466e
--- /dev/null
+++ b/arch/arm/mach-at91/leds.c
@@ -0,0 +1,99 @@
1/*
2 * LED driver for Atmel AT91-based boards.
3 *
4 * Copyright (C) SAN People (Pty) Ltd
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
10*/
11
12#include <linux/kernel.h>
13#include <linux/module.h>
14#include <linux/init.h>
15
16#include <asm/mach-types.h>
17#include <asm/leds.h>
18#include <asm/arch/board.h>
19#include <asm/arch/gpio.h>
20
21
22static inline void at91_led_on(unsigned int led)
23{
24 at91_set_gpio_value(led, 0);
25}
26
27static inline void at91_led_off(unsigned int led)
28{
29 at91_set_gpio_value(led, 1);
30}
31
32static inline void at91_led_toggle(unsigned int led)
33{
34 unsigned long is_off = at91_get_gpio_value(led);
35 if (is_off)
36 at91_led_on(led);
37 else
38 at91_led_off(led);
39}
40
41
42/*
43 * Handle LED events.
44 */
45static void at91_leds_event(led_event_t evt)
46{
47 unsigned long flags;
48
49 local_irq_save(flags);
50
51 switch(evt) {
52 case led_start: /* System startup */
53 at91_led_on(at91_leds_cpu);
54 break;
55
56 case led_stop: /* System stop / suspend */
57 at91_led_off(at91_leds_cpu);
58 break;
59
60#ifdef CONFIG_LEDS_TIMER
61 case led_timer: /* Every 50 timer ticks */
62 at91_led_toggle(at91_leds_timer);
63 break;
64#endif
65
66#ifdef CONFIG_LEDS_CPU
67 case led_idle_start: /* Entering idle state */
68 at91_led_off(at91_leds_cpu);
69 break;
70
71 case led_idle_end: /* Exit idle state */
72 at91_led_on(at91_leds_cpu);
73 break;
74#endif
75
76 default:
77 break;
78 }
79
80 local_irq_restore(flags);
81}
82
83
84static int __init leds_init(void)
85{
86 if (!at91_leds_timer || !at91_leds_cpu)
87 return -ENODEV;
88
89 /* Enable PIO to access the LEDs */
90 at91_set_gpio_output(at91_leds_timer, 1);
91 at91_set_gpio_output(at91_leds_cpu, 1);
92
93 leds_event = at91_leds_event;
94
95 leds_event(led_start);
96 return 0;
97}
98
99__initcall(leds_init);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
new file mode 100644
index 000000000000..e095b1fe8d8a
--- /dev/null
+++ b/arch/arm/mach-at91/pm.c
@@ -0,0 +1,227 @@
1/*
2 * arch/arm/mach-at91/pm.c
3 * AT91 Power Management
4 *
5 * Copyright (C) 2005 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 */
12
13#include <linux/pm.h>
14#include <linux/sched.h>
15#include <linux/proc_fs.h>
16#include <linux/pm.h>
17#include <linux/interrupt.h>
18#include <linux/sysfs.h>
19#include <linux/module.h>
20#include <linux/platform_device.h>
21
22#include <asm/io.h>
23#include <asm/irq.h>
24#include <asm/atomic.h>
25#include <asm/mach/time.h>
26#include <asm/mach/irq.h>
27#include <asm/mach-types.h>
28
29#include <asm/arch/at91_pmc.h>
30#include <asm/arch/at91rm9200_mc.h>
31#include <asm/arch/gpio.h>
32#include <asm/arch/cpu.h>
33
34#include "generic.h"
35
36
37static int at91_pm_valid_state(suspend_state_t state)
38{
39 switch (state) {
40 case PM_SUSPEND_ON:
41 case PM_SUSPEND_STANDBY:
42 case PM_SUSPEND_MEM:
43 return 1;
44
45 default:
46 return 0;
47 }
48}
49
50
51static suspend_state_t target_state;
52
53/*
54 * Called after processes are frozen, but before we shutdown devices.
55 */
56static int at91_pm_prepare(suspend_state_t state)
57{
58 target_state = state;
59 return 0;
60}
61
62/*
63 * Verify that all the clocks are correct before entering
64 * slow-clock mode.
65 */
66static int at91_pm_verify_clocks(void)
67{
68 unsigned long scsr;
69 int i;
70
71 scsr = at91_sys_read(AT91_PMC_SCSR);
72
73 /* USB must not be using PLLB */
74 if (cpu_is_at91rm9200()) {
75 if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
76 pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
77 return 0;
78 }
79 } else if (cpu_is_at91sam9260()) {
80#warning "Check SAM9260 USB clocks"
81 } else if (cpu_is_at91sam9261()) {
82#warning "Check SAM9261 USB clocks"
83 }
84
85#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
86 /* PCK0..PCK3 must be disabled, or configured to use clk32k */
87 for (i = 0; i < 4; i++) {
88 u32 css;
89
90 if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
91 continue;
92
93 css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
94 if (css != AT91_PMC_CSS_SLOW) {
95 pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
96 return 0;
97 }
98 }
99#endif
100
101 return 1;
102}
103
104/*
105 * Call this from platform driver suspend() to see how deeply to suspend.
106 * For example, some controllers (like OHCI) need one of the PLL clocks
107 * in order to act as a wakeup source, and those are not available when
108 * going into slow clock mode.
109 *
110 * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
111 * the very same problem (but not using at91 main_clk), and it'd be better
112 * to add one generic API rather than lots of platform-specific ones.
113 */
114int at91_suspend_entering_slow_clock(void)
115{
116 return (target_state == PM_SUSPEND_MEM);
117}
118EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
119
120
121static void (*slow_clock)(void);
122
123
124static int at91_pm_enter(suspend_state_t state)
125{
126 at91_gpio_suspend();
127 at91_irq_suspend();
128
129 pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
130 /* remember all the always-wake irqs */
131 (at91_sys_read(AT91_PMC_PCSR)
132 | (1 << AT91_ID_FIQ)
133 | (1 << AT91_ID_SYS)
134 | (at91_extern_irq))
135 & at91_sys_read(AT91_AIC_IMR),
136 state);
137
138 switch (state) {
139 /*
140 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
141 * drivers must suspend more deeply: only the master clock
142 * controller may be using the main oscillator.
143 */
144 case PM_SUSPEND_MEM:
145 /*
146 * Ensure that clocks are in a valid state.
147 */
148 if (!at91_pm_verify_clocks())
149 goto error;
150
151 /*
152 * Enter slow clock mode by switching over to clk32k and
153 * turning off the main oscillator; reverse on wakeup.
154 */
155 if (slow_clock) {
156 slow_clock();
157 break;
158 } else {
159 /* DEVELOPMENT ONLY */
160 pr_info("AT91: PM - no slow clock mode yet ...\n");
161 /* FALLTHROUGH leaving master clock alone */
162 }
163
164 /*
165 * STANDBY mode has *all* drivers suspended; ignores irqs not
166 * marked as 'wakeup' event sources; and reduces DRAM power.
167 * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
168 * nothing fancy done with main or cpu clocks.
169 */
170 case PM_SUSPEND_STANDBY:
171 /*
172 * NOTE: the Wait-for-Interrupt instruction needs to be
173 * in icache so the SDRAM stays in self-refresh mode until
174 * the wakeup IRQ occurs.
175 */
176 asm("b 1f; .align 5; 1:");
177 asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
178 at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
179 /* fall though to next state */
180
181 case PM_SUSPEND_ON:
182 asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
183 break;
184
185 default:
186 pr_debug("AT91: PM - bogus suspend state %d\n", state);
187 goto error;
188 }
189
190 pr_debug("AT91: PM - wakeup %08x\n",
191 at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
192
193error:
194 target_state = PM_SUSPEND_ON;
195 at91_irq_resume();
196 at91_gpio_resume();
197 return 0;
198}
199
200
201static struct pm_ops at91_pm_ops ={
202 .pm_disk_mode = 0,
203 .valid = at91_pm_valid_state,
204 .prepare = at91_pm_prepare,
205 .enter = at91_pm_enter,
206};
207
208static int __init at91_pm_init(void)
209{
210 printk("AT91: Power Management\n");
211
212#ifdef CONFIG_AT91_PM_SLOW_CLOCK
213 /* REVISIT allocations of SRAM should be dynamically managed.
214 * FIQ handlers and other components will want SRAM/TCM too...
215 */
216 slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
217 memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
218#endif
219
220 /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
221 at91_sys_write(AT91_SDRAMC_LPR, 0);
222
223 pm_set_ops(&at91_pm_ops);
224
225 return 0;
226}
227arch_initcall(at91_pm_init);