84 files changed, 1170 insertions, 877 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d111c3e99249..4f991f295284 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -3,6 +3,12 @@ if ARCH_AT91
 config HAVE_AT91_DATAFLASH_CARD
         bool
 
+config HAVE_AT91_DBGU0
+        bool
+
+config HAVE_AT91_DBGU1
+        bool
+
 config HAVE_AT91_USART3
         bool
 
@@ -21,12 +27,14 @@ config ARCH_AT91RM9200
         bool "AT91RM9200"
         select CPU_ARM920T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
         bool "AT91SAM9260 or AT91SAM9XE"
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_AT91_USART3
         select HAVE_AT91_USART4
         select HAVE_AT91_USART5
@@ -37,11 +45,13 @@ config ARCH_AT91SAM9261
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
+        select HAVE_AT91_DBGU0
 
 config ARCH_AT91SAM9G10
         bool "AT91SAM9G10"
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
@@ -50,6 +60,7 @@ config ARCH_AT91SAM9263
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
+        select HAVE_AT91_DBGU1
 
 config ARCH_AT91SAM9RL
         bool "AT91SAM9RL"
@@ -57,11 +68,13 @@ config ARCH_AT91SAM9RL
         select GENERIC_CLOCKEVENTS
         select HAVE_AT91_USART3
         select HAVE_FB_ATMEL
+        select HAVE_AT91_DBGU0
 
 config ARCH_AT91SAM9G20
         bool "AT91SAM9G20"
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
+        select HAVE_AT91_DBGU0
         select HAVE_AT91_USART3
         select HAVE_AT91_USART4
         select HAVE_AT91_USART5
@@ -74,6 +87,7 @@ config ARCH_AT91SAM9G45
         select HAVE_AT91_USART3
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
+        select HAVE_AT91_DBGU1
 
 config ARCH_AT91CAP9
         bool "AT91CAP9"
@@ -81,6 +95,7 @@ config ARCH_AT91CAP9
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
+        select HAVE_AT91_DBGU1
 
 config ARCH_AT91X40
         bool "AT91x40"
@@ -510,8 +525,13 @@ config AT91_TIMER_HZ
 choice
         prompt "Select a UART for early kernel messages"
 
-config AT91_EARLY_DBGU
-        bool "DBGU"
+config AT91_EARLY_DBGU0
+        bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
+        depends on HAVE_AT91_DBGU0
+
+config AT91_EARLY_DBGU1
+        bool "DBGU on 9263, 9g45 and cap9"
+        depends on HAVE_AT91_DBGU1
 
 config AT91_EARLY_USART0
         bool "USART0"
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index ecdd54dd68c6..506a26c3fff6 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -13,7 +13,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -23,11 +22,11 @@
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -137,7 +136,7 @@ static struct clk pwm_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91CAP9_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -210,6 +209,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
         CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
         CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@@ -221,6 +222,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioABCD_clk),
+        CLKDEV_CON_ID("pioB", &pioABCD_clk),
+        CLKDEV_CON_ID("pioC", &pioABCD_clk),
+        CLKDEV_CON_ID("pioD", &pioABCD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -293,23 +298,19 @@ void __init at91cap9_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91cap9_gpio[] = {
+static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
         {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOA,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOA,
         }, {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOB,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOB,
         }, {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOC,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOC,
         }, {
                 .id             = AT91CAP9_ID_PIOABCD,
-                .offset         = AT91_PIOD,
-                .clock          = &pioABCD_clk,
+                .regbase        = AT91CAP9_BASE_PIOD,
         }
 };
 
@@ -318,12 +319,6 @@ static void at91cap9_reset(void)
         at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
-static void at91cap9_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -333,10 +328,16 @@ static void __init at91cap9_map_io(void)
         at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
 }
 
+static void __init at91cap9_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
+}
+
 static void __init at91cap9_initialize(void)
 {
         at91_arch_reset = at91cap9_reset;
-        pm_power_off = at91cap9_poweroff;
         at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
         /* Register GPIO subsystem */
@@ -394,6 +395,7 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91cap9_soc = {
         .map_io = at91cap9_map_io,
         .default_irq_priority = at91cap9_default_irq_priority,
+        .ioremap_registers = at91cap9_ioremap_registers,
         .register_clocks = at91cap9_register_clocks,
         .init = at91cap9_initialize,
 };
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index adad70db70eb..d298fb7cb210 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -76,7 +76,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -179,7 +179,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
-        if (data && data->vbus_pin > 0) {
+        if (data && gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -200,7 +200,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -227,12 +227,12 @@ static struct platform_device at91cap9_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -264,7 +264,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91cap9_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -332,13 +332,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         if (mmc_id == 0) {              /* MCI0 */
@@ -398,8 +398,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91CAP9_BASE_ECC,
+                .end    = AT91CAP9_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -425,15 +425,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -670,8 +670,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91CAP9_BASE_RTT,
+                .end    = AT91CAP9_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -694,10 +694,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91CAP9_BASE_WDT,
+                .end    = AT91CAP9_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91cap9_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -807,7 +816,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PA9, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -1021,8 +1030,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91CAP9_BASE_DBGU,
+                .end    = AT91CAP9_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 713d3bdbd284..9163d7d5f76e 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -23,6 +23,7 @@
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 static struct map_desc at91rm9200_io_desc[] __initdata = {
         {
@@ -195,6 +196,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
+        CLKDEV_CON_ID("pioD", &pioD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -268,23 +273,19 @@ void __init at91rm9200_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91rm9200_gpio[] = {
+static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
         {
                 .id             = AT91RM9200_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91RM9200_BASE_PIOA,
         }, {
                 .id             = AT91RM9200_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91RM9200_BASE_PIOB,
         }, {
                 .id             = AT91RM9200_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91RM9200_BASE_PIOC,
         }, {
                 .id             = AT91RM9200_ID_PIOD,
-                .offset         = AT91_PIOD,
-                .clock          = &pioD_clk,
+                .regbase        = AT91RM9200_BASE_PIOD,
         }
 };
 
@@ -307,6 +308,10 @@ static void __init at91rm9200_map_io(void)
         iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
 }
 
+static void __init at91rm9200_ioremap_registers(void)
+{
+}
+
 static void __init at91rm9200_initialize(void)
 {
         at91_arch_reset = at91rm9200_reset;
@@ -366,6 +371,7 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91rm9200_soc = {
         .map_io = at91rm9200_map_io,
         .default_irq_priority = at91rm9200_default_irq_priority,
+        .ioremap_registers = at91rm9200_ioremap_registers,
         .register_clocks = at91rm9200_register_clocks,
         .init = at91rm9200_initialize,
 };
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 66591fa53e05..18bacec2b094 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -114,11 +114,11 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
-        if (data->pullup_pin)
+        if (gpio_is_valid(data->pullup_pin))
                 at91_set_gpio_output(data->pullup_pin, 0);
 
         udc_data = *data;
@@ -135,7 +135,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -162,12 +162,12 @@ static struct platform_device at91rm9200_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -199,7 +199,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91rm9200_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -260,7 +260,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
         );
 
         /* input/irq */
-        if (data->irq_pin) {
+        if (gpio_is_valid(data->irq_pin)) {
                 at91_set_gpio_input(data->irq_pin, 1);
                 at91_set_deglitch(data->irq_pin, 1);
         }
@@ -268,7 +268,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
         at91_set_deglitch(data->det_pin, 1);
 
         /* outputs, initially off */
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
         at91_set_gpio_output(data->rst_pin, 0);
 
@@ -328,13 +328,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -419,15 +419,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         );
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         at91_set_A_periph(AT91_PIN_PC1, 0);             /* SMOE */
@@ -665,10 +665,24 @@ static void __init at91_add_device_tc(void) { }
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct resource rtc_resources[] = {
+        [0] = {
+                .start  = AT91RM9200_BASE_RTC,
+                .end    = AT91RM9200_BASE_RTC + SZ_256 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91_ID_SYS,
+                .end    = AT91_ID_SYS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
 static struct platform_device at91rm9200_rtc_device = {
         .name           = "at91_rtc",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = rtc_resources,
+        .num_resources  = ARRAY_SIZE(rtc_resources),
 };
 
 static void __init at91_add_device_rtc(void)
@@ -877,8 +891,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91RM9200_BASE_DBGU,
+                .end    = AT91RM9200_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 1dd69c85dfec..a028cdf8f974 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -32,6 +32,8 @@ static unsigned long last_crtr;
 static u32 irqmask;
 static struct clock_event_device clkevt;
 
+#define RM9200_TIMER_LATCH      ((AT91_SLOW_CLOCK + HZ/2) / HZ)
+
 /*
  * The ST_CRTR is updated asynchronously to the master clock ... but
  * the updates as seen by the CPU don't seem to be strictly monotonic.
@@ -74,8 +76,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
         if (sr & AT91_ST_PITS) {
                 u32     crtr = read_CRTR();
 
-                while (((crtr - last_crtr) & AT91_ST_CRTV) >= LATCH) {
-                        last_crtr += LATCH;
+                while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
+                        last_crtr += RM9200_TIMER_LATCH;
                         clkevt.event_handler(&clkevt);
                 }
                 return IRQ_HANDLED;
@@ -116,7 +118,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         case CLOCK_EVT_MODE_PERIODIC:
                 /* PIT for periodic irqs; fixed rate of 1/HZ */
                 irqmask = AT91_ST_PITS;
-                at91_sys_write(AT91_ST_PIMR, LATCH);
+                at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
                 /* ALM for oneshot irqs, set by next_event()
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b84a9f642f59..3a960d2740b6 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -21,11 +20,11 @@
 #include <mach/at91sam9260.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -120,7 +119,7 @@ static struct clk ohci_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91SAM9260_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -190,14 +189,16 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
         CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
         CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
         CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
         CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-        CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-        CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-        CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+        CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+        CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+        CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
         /* more usart lookup table for DT entries */
         CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
@@ -209,6 +210,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -270,28 +274,19 @@ void __init at91sam9260_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9260_gpio[] = {
+static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
         {
                 .id             = AT91SAM9260_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9260_BASE_PIOA,
         }, {
                 .id             = AT91SAM9260_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9260_BASE_PIOB,
         }, {
                 .id             = AT91SAM9260_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9260_BASE_PIOC,
         }
 };
 
-static void at91sam9260_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
@@ -325,10 +320,16 @@ static void __init at91sam9260_map_io(void)
         }
 }
 
+static void __init at91sam9260_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
+}
+
 static void __init at91sam9260_initialize(void)
 {
         at91_arch_reset = at91sam9_alt_reset;
-        pm_power_off = at91sam9260_poweroff;
         at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
                         | (1 << AT91SAM9260_ID_IRQ2);
 
@@ -381,6 +382,7 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9260_soc = {
         .map_io = at91sam9260_map_io,
         .default_irq_priority = at91sam9260_default_irq_priority,
+        .ioremap_registers = at91sam9260_ioremap_registers,
         .register_clocks = at91sam9260_register_clocks,
         .init = at91sam9260_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 25e3464fb07f..642ccb6d26b2 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -115,7 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
@@ -136,7 +136,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -163,12 +163,12 @@ static struct platform_device at91sam9260_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -200,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -243,13 +243,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -330,11 +330,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
         for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
                 if (data->slot[i].bus_width) {
                         /* input/irq */
-                        if (data->slot[i].detect_pin) {
+                        if (gpio_is_valid(data->slot[i].detect_pin)) {
                                 at91_set_gpio_input(data->slot[i].detect_pin, 1);
                                 at91_set_deglitch(data->slot[i].detect_pin, 1);
                         }
-                        if (data->slot[i].wp_pin)
+                        if (gpio_is_valid(data->slot[i].wp_pin))
                                 at91_set_gpio_input(data->slot[i].wp_pin, 1);
 
                         switch (i) {
@@ -399,8 +399,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91SAM9260_BASE_ECC,
+                .end    = AT91SAM9260_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -426,15 +426,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -714,8 +714,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9260_BASE_RTT,
+                .end    = AT91SAM9260_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -738,10 +738,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9260_BASE_WDT,
+                .end    = AT91SAM9260_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9260_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -837,8 +846,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9260_BASE_DBGU,
+                .end    = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -1281,17 +1290,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 
         at91_sys_write(AT91_MATRIX_EBICSA, csa);
 
-        if (data->rst_pin) {
+        if (gpio_is_valid(data->rst_pin)) {
                 at91_set_multi_drive(data->rst_pin, 0);
                 at91_set_gpio_output(data->rst_pin, 1);
         }
 
-        if (data->irq_pin) {
+        if (gpio_is_valid(data->irq_pin)) {
                 at91_set_gpio_input(data->irq_pin, 0);
                 at91_set_deglitch(data->irq_pin, 1);
         }
 
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 0);
                 at91_set_deglitch(data->det_pin, 1);
         }
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 658a5185abfd..a0538c5c2520 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -20,11 +19,11 @@
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -176,6 +175,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -251,28 +253,19 @@ void __init at91sam9261_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9261_gpio[] = {
+static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
         {
                 .id             = AT91SAM9261_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9261_BASE_PIOA,
         }, {
                 .id             = AT91SAM9261_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9261_BASE_PIOB,
         }, {
                 .id             = AT91SAM9261_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9261_BASE_PIOC,
         }
 };
 
-static void at91sam9261_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9261 processor initialization
  * -------------------------------------------------------------------- */
@@ -285,10 +278,16 @@ static void __init at91sam9261_map_io(void)
                 at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
 }
 
+static void __init at91sam9261_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
+}
+
 static void __init at91sam9261_initialize(void)
 {
         at91_arch_reset = at91sam9_alt_reset;
-        pm_power_off = at91sam9261_poweroff;
         at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
                         | (1 << AT91SAM9261_ID_IRQ2);
 
@@ -341,6 +340,7 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9261_soc = {
         .map_io = at91sam9261_map_io,
         .default_irq_priority = at91sam9261_default_irq_priority,
+        .ioremap_registers = at91sam9261_ioremap_registers,
         .register_clocks = at91sam9261_register_clocks,
         .init = at91sam9261_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ae78f4d03b73..fc59cbdb0e3c 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -118,7 +118,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
@@ -171,13 +171,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -240,15 +240,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         at91_set_A_periph(AT91_PIN_PC0, 0);             /* NANDOE */
@@ -600,8 +600,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9261_BASE_RTT,
+                .end    = AT91SAM9261_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -624,10 +624,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9261_BASE_WDT,
+                .end    = AT91SAM9261_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9261_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -816,8 +825,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9261_BASE_DBGU,
+                .end    = AT91SAM9261_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f83fbb0ee0c5..5ffbbb024c1e 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -19,11 +18,11 @@
 #include <mach/at91sam9263.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -118,7 +117,7 @@ static struct clk pwm_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91SAM9263_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -182,6 +181,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
         CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
@@ -191,6 +192,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioCDE_clk),
+        CLKDEV_CON_ID("pioD", &pioCDE_clk),
+        CLKDEV_CON_ID("pioE", &pioCDE_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -263,36 +269,25 @@ void __init at91sam9263_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9263_gpio[] = {
+static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
         {
                 .id             = AT91SAM9263_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9263_BASE_PIOA,
         }, {
                 .id             = AT91SAM9263_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9263_BASE_PIOB,
         }, {
                 .id             = AT91SAM9263_ID_PIOCDE,
-                .offset         = AT91_PIOC,
-                .clock          = &pioCDE_clk,
+                .regbase        = AT91SAM9263_BASE_PIOC,
         }, {
                 .id             = AT91SAM9263_ID_PIOCDE,
-                .offset         = AT91_PIOD,
-                .clock          = &pioCDE_clk,
+                .regbase        = AT91SAM9263_BASE_PIOD,
         }, {
                 .id             = AT91SAM9263_ID_PIOCDE,
-                .offset         = AT91_PIOE,
-                .clock          = &pioCDE_clk,
+                .regbase        = AT91SAM9263_BASE_PIOE,
         }
 };
 
-static void at91sam9263_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9263 processor initialization
  * -------------------------------------------------------------------- */
@@ -303,10 +298,17 @@ static void __init at91sam9263_map_io(void)
         at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
 }
 
+static void __init at91sam9263_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
+        at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
+}
+
 static void __init at91sam9263_initialize(void)
 {
         at91_arch_reset = at91sam9_alt_reset;
-        pm_power_off = at91sam9263_poweroff;
         at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
         /* Register GPIO subsystem */
@@ -358,6 +360,7 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9263_soc = {
         .map_io = at91sam9263_map_io,
         .default_irq_priority = at91sam9263_default_irq_priority,
+        .ioremap_registers = at91sam9263_ioremap_registers,
         .register_clocks = at91sam9263_register_clocks,
         .init = at91sam9263_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ad017eb1f8df..7b46b2787022 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -70,7 +70,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {
@@ -123,7 +123,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
         if (!data)
                 return;
 
-        if (data->vbus_pin) {
+        if (gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
         }
@@ -144,7 +144,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -171,12 +171,12 @@ static struct platform_device at91sam9263_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -208,7 +208,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91sam9263_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -276,13 +276,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         if (mmc_id == 0) {              /* MCI0 */
@@ -430,17 +430,17 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
         }
         at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
 
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
 
-        if (data->irq_pin) {
+        if (gpio_is_valid(data->irq_pin)) {
                 at91_set_gpio_input(data->irq_pin, 1);
                 at91_set_deglitch(data->irq_pin, 1);
         }
 
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 /* initially off */
                 at91_set_gpio_output(data->vcc_pin, 0);
 
@@ -473,8 +473,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC0,
-                .end    = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
+                .start  = AT91SAM9263_BASE_ECC0,
+                .end    = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -500,15 +500,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -749,7 +749,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PB3, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -956,8 +956,8 @@ static void __init at91_add_device_tc(void) { }
 
 static struct resource rtt0_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT0,
-                .end    = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
+                .start  = AT91SAM9263_BASE_RTT0,
+                .end    = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -971,8 +971,8 @@ static struct platform_device at91sam9263_rtt0_device = {
 
 static struct resource rtt1_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT1,
-                .end    = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
+                .start  = AT91SAM9263_BASE_RTT1,
+                .end    = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -996,10 +996,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9263_BASE_WDT,
+                .end    = AT91SAM9263_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9263_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -1196,8 +1205,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9263_BASE_DBGU,
+                .end    = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4ba85499fa97..d89ead740a99 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -25,7 +25,17 @@
 
 static u32 pit_cycle;           /* write-once */
 static u32 pit_cnt;             /* access only w/system irq blocked */
+static void __iomem *pit_base_addr __read_mostly;
 
+static inline unsigned int pit_read(unsigned int reg_offset)
+{
+        return __raw_readl(pit_base_addr + reg_offset);
+}
+
+static inline void pit_write(unsigned int reg_offset, unsigned long value)
+{
+        __raw_writel(value, pit_base_addr + reg_offset);
+}
 
 /*
  * Clocksource:  just a monotonic counter of MCK/16 cycles.
@@ -39,7 +49,7 @@ static cycle_t read_pit_clk(struct clocksource *cs)
 
         raw_local_irq_save(flags);
         elapsed = pit_cnt;
-        t = at91_sys_read(AT91_PIT_PIIR);
+        t = pit_read(AT91_PIT_PIIR);
         raw_local_irq_restore(flags);
 
         elapsed += PIT_PICNT(t) * pit_cycle;
@@ -64,8 +74,8 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
                 /* update clocksource counter */
-                pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
-                at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
+                pit_cnt += pit_cycle * PIT_PICNT(pit_read(AT91_PIT_PIVR));
+                pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
                                 | AT91_PIT_PITIEN);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
@@ -74,7 +84,7 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         case CLOCK_EVT_MODE_SHUTDOWN:
         case CLOCK_EVT_MODE_UNUSED:
                 /* disable irq, leaving the clocksource active */
-                at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+                pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 break;
@@ -103,11 +113,11 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
         /* The PIT interrupt may be disabled, and is shared */
         if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
-                        && (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
+                        && (pit_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
                 unsigned nr_ticks;
 
                 /* Get number of ticks performed before irq, and ack it */
-                nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+                nr_ticks = PIT_PICNT(pit_read(AT91_PIT_PIVR));
                 do {
                         pit_cnt += pit_cycle;
                         pit_clkevt.event_handler(&pit_clkevt);
@@ -129,14 +139,14 @@ static struct irqaction at91sam926x_pit_irq = {
 static void at91sam926x_pit_reset(void)
 {
         /* Disable timer and irqs */
-        at91_sys_write(AT91_PIT_MR, 0);
+        pit_write(AT91_PIT_MR, 0);
 
         /* Clear any pending interrupts, wait for PIT to stop counting */
-        while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
+        while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
                 cpu_relax();
 
         /* Start PIT but don't enable IRQ */
-        at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+        pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
 }
 
 /*
@@ -178,7 +188,15 @@ static void __init at91sam926x_pit_init(void)
 static void at91sam926x_pit_suspend(void)
 {
         /* Disable timer */
-        at91_sys_write(AT91_PIT_MR, 0);
+        pit_write(AT91_PIT_MR, 0);
+}
+
+void __init at91sam926x_ioremap_pit(u32 addr)
+{
+        pit_base_addr = ioremap(addr, 16);
+
+        if (!pit_base_addr)
+                panic("Impossible to ioremap PIT\n");
 }
 
 struct sys_timer at91sam926x_timer = {
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 318b0407ea04..f61eb64e6b39 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -11,7 +11,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 #include <linux/dma-mapping.h>
 
 #include <asm/irq.h>
@@ -20,12 +19,12 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 #include <mach/cpu.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -150,7 +149,7 @@ static struct clk ac97_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-        .name           = "macb_clk",
+        .name           = "pclk",
         .pmc_mask       = 1 << AT91SAM9G45_ID_EMAC,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -209,6 +208,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+        /* One additional fake clock for macb_hclk */
+        CLKDEV_CON_ID("hclk", &macb_clk),
         /* One additional fake clock for ohci */
         CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
         CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
@@ -231,6 +232,11 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
+        CLKDEV_CON_ID("pioD", &pioDE_clk),
+        CLKDEV_CON_ID("pioE", &pioDE_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -293,27 +299,22 @@ void __init at91sam9g45_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9g45_gpio[] = {
+static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
         {
                 .id             = AT91SAM9G45_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOA,
         }, {
                 .id             = AT91SAM9G45_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOB,
         }, {
                 .id             = AT91SAM9G45_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOC,
         }, {
                 .id             = AT91SAM9G45_ID_PIODE,
-                .offset         = AT91_PIOD,
-                .clock          = &pioDE_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOD,
         }, {
                 .id             = AT91SAM9G45_ID_PIODE,
-                .offset         = AT91_PIOE,
-                .clock          = &pioDE_clk,
+                .regbase        = AT91SAM9G45_BASE_PIOE,
         }
 };
 
@@ -322,12 +323,6 @@ static void at91sam9g45_reset(void)
         at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
-static void at91sam9g45_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
@@ -338,10 +333,16 @@ static void __init at91sam9g45_map_io(void)
         init_consistent_dma_size(SZ_4M);
 }
 
+static void __init at91sam9g45_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
+}
+
 static void __init at91sam9g45_initialize(void)
 {
         at91_arch_reset = at91sam9g45_reset;
-        pm_power_off = at91sam9g45_poweroff;
         at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 
         /* Register GPIO subsystem */
@@ -393,6 +394,7 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9g45_soc = {
         .map_io = at91sam9g45_map_io,
         .default_irq_priority = at91sam9g45_default_irq_priority,
+        .ioremap_registers = at91sam9g45_ioremap_registers,
         .register_clocks = at91sam9g45_register_clocks,
         .init = at91sam9g45_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 09a16d6bd5cd..b7582dd10dc3 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -44,8 +44,8 @@ static struct at_dma_platform_data atdma_pdata = {
 
 static struct resource hdmac_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DMA,
-                .end    = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+                .start  = AT91SAM9G45_BASE_DMA,
+                .end    = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -120,7 +120,7 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -181,7 +181,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 
         /* Enable VBus control for UHP ports */
         for (i = 0; i < data->ports; i++) {
-                if (data->vbus_pin[i])
+                if (gpio_is_valid(data->vbus_pin[i]))
                         at91_set_gpio_output(data->vbus_pin[i], 0);
         }
 
@@ -263,7 +263,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
-        if (data && data->vbus_pin > 0) {
+        if (data && gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -284,7 +284,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
         [0] = {
@@ -311,12 +311,12 @@ static struct platform_device at91sam9g45_eth_device = {
         .num_resources  = ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
         if (!data)
                 return;
 
-        if (data->phy_irq_pin) {
+        if (gpio_is_valid(data->phy_irq_pin)) {
                 at91_set_gpio_input(data->phy_irq_pin, 0);
                 at91_set_deglitch(data->phy_irq_pin, 1);
         }
@@ -348,7 +348,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data)
         platform_device_register(&at91sam9g45_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
@@ -449,11 +449,11 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 
 
         /* input/irq */
-        if (data->slot[0].detect_pin) {
+        if (gpio_is_valid(data->slot[0].detect_pin)) {
                 at91_set_gpio_input(data->slot[0].detect_pin, 1);
                 at91_set_deglitch(data->slot[0].detect_pin, 1);
         }
-        if (data->slot[0].wp_pin)
+        if (gpio_is_valid(data->slot[0].wp_pin))
                 at91_set_gpio_input(data->slot[0].wp_pin, 1);
 
         if (mmc_id == 0) {              /* MCI0 */
@@ -529,8 +529,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91SAM9G45_BASE_ECC,
+                .end    = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -556,15 +556,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         nand_data = *data;
@@ -859,7 +859,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PD6, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -1009,10 +1009,24 @@ static void __init at91_add_device_tc(void) { }
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct resource rtc_resources[] = {
+        [0] = {
+                .start  = AT91SAM9G45_BASE_RTC,
+                .end    = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = AT91_ID_SYS,
+                .end    = AT91_ID_SYS,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
 static struct platform_device at91sam9g45_rtc_device = {
         .name           = "at91_rtc",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = rtc_resources,
+        .num_resources  = ARRAY_SIZE(rtc_resources),
 };
 
 static void __init at91_add_device_rtc(void)
@@ -1081,8 +1095,8 @@ void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9G45_BASE_RTT,
+                .end    = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -1133,10 +1147,19 @@ static void __init at91_add_device_trng(void) {}
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9G45_BASE_WDT,
+                .end    = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9g45_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -1332,8 +1355,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9G45_BASE_DBGU,
+                .end    = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index a238105d2c11..96247f68b9d2 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,7 +10,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -20,11 +19,11 @@
 #include <mach/at91sam9rl.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
-#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
 #include "clock.h"
+#include "sam9_smc.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -184,6 +183,10 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
         CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+        CLKDEV_CON_ID("pioA", &pioA_clk),
+        CLKDEV_CON_ID("pioB", &pioB_clk),
+        CLKDEV_CON_ID("pioC", &pioC_clk),
+        CLKDEV_CON_ID("pioD", &pioD_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {
@@ -243,32 +246,22 @@ void __init at91sam9rl_set_console_clock(int id)
  *  GPIO
  * -------------------------------------------------------------------- */
 
-static struct at91_gpio_bank at91sam9rl_gpio[] = {
+static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
         {
                 .id             = AT91SAM9RL_ID_PIOA,
-                .offset         = AT91_PIOA,
-                .clock          = &pioA_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOA,
         }, {
                 .id             = AT91SAM9RL_ID_PIOB,
-                .offset         = AT91_PIOB,
-                .clock          = &pioB_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOB,
         }, {
                 .id             = AT91SAM9RL_ID_PIOC,
-                .offset         = AT91_PIOC,
-                .clock          = &pioC_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOC,
         }, {
                 .id             = AT91SAM9RL_ID_PIOD,
-                .offset         = AT91_PIOD,
-                .clock          = &pioD_clk,
+                .regbase        = AT91SAM9RL_BASE_PIOD,
         }
 };
 
-static void at91sam9rl_poweroff(void)
-{
-        at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
-}
-
-
 /* --------------------------------------------------------------------
  *  AT91SAM9RL processor initialization
  * -------------------------------------------------------------------- */
@@ -290,10 +283,16 @@ static void __init at91sam9rl_map_io(void)
         at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
 }
 
+static void __init at91sam9rl_ioremap_registers(void)
+{
+        at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+        at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
+        at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
+}
+
 static void __init at91sam9rl_initialize(void)
 {
         at91_arch_reset = at91sam9_alt_reset;
-        pm_power_off = at91sam9rl_poweroff;
         at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
         /* Register GPIO subsystem */
@@ -345,6 +344,7 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9rl_soc = {
         .map_io = at91sam9rl_map_io,
         .default_irq_priority = at91sam9rl_default_irq_priority,
+        .ioremap_registers = at91sam9rl_ioremap_registers,
         .register_clocks = at91sam9rl_register_clocks,
         .init = at91sam9rl_initialize,
 };
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 628eb566d60c..61908dce9784 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -39,8 +39,8 @@ static struct at_dma_platform_data atdma_pdata = {
 
 static struct resource hdmac_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DMA,
-                .end    = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+                .start  = AT91SAM9RL_BASE_DMA,
+                .end    = AT91SAM9RL_BASE_DMA + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [2] = {
@@ -147,7 +147,7 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
 
-        if (data && data->vbus_pin > 0) {
+        if (data && gpio_is_valid(data->vbus_pin)) {
                 at91_set_gpio_input(data->vbus_pin, 0);
                 at91_set_deglitch(data->vbus_pin, 1);
                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
@@ -201,13 +201,13 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
                 return;
 
         /* input/irq */
-        if (data->det_pin) {
+        if (gpio_is_valid(data->det_pin)) {
                 at91_set_gpio_input(data->det_pin, 1);
                 at91_set_deglitch(data->det_pin, 1);
         }
-        if (data->wp_pin)
+        if (gpio_is_valid(data->wp_pin))
                 at91_set_gpio_input(data->wp_pin, 1);
-        if (data->vcc_pin)
+        if (gpio_is_valid(data->vcc_pin))
                 at91_set_gpio_output(data->vcc_pin, 0);
 
         /* CLK */
@@ -248,8 +248,8 @@ static struct resource nand_resources[] = {
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
-                .start  = AT91_BASE_SYS + AT91_ECC,
-                .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+                .start  = AT91SAM9RL_BASE_ECC,
+                .end    = AT91SAM9RL_BASE_ECC + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -275,15 +275,15 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
         /* enable pin */
-        if (data->enable_pin)
+        if (gpio_is_valid(data->enable_pin))
                 at91_set_gpio_output(data->enable_pin, 1);
 
         /* ready/busy pin */
-        if (data->rdy_pin)
+        if (gpio_is_valid(data->rdy_pin))
                 at91_set_gpio_input(data->rdy_pin, 1);
 
         /* card detect pin */
-        if (data->det_pin)
+        if (gpio_is_valid(data->det_pin))
                 at91_set_gpio_input(data->det_pin, 1);
 
         at91_set_A_periph(AT91_PIN_PB4, 0);             /* NANDOE */
@@ -483,7 +483,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
         at91_set_A_periph(AT91_PIN_PD4, 0);     /* AC97RX */
 
         /* reset */
-        if (data->reset_pin)
+        if (gpio_is_valid(data->reset_pin))
                 at91_set_gpio_output(data->reset_pin, 0);
 
         ac97_data = *data;
@@ -685,8 +685,8 @@ static void __init at91_add_device_rtc(void) {}
 
 static struct resource rtt_resources[] = {
         {
-                .start  = AT91_BASE_SYS + AT91_RTT,
-                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+                .start  = AT91SAM9RL_BASE_RTT,
+                .end    = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
                 .flags  = IORESOURCE_MEM,
         }
 };
@@ -709,10 +709,19 @@ static void __init at91_add_device_rtt(void)
  * -------------------------------------------------------------------- */
 
 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
+static struct resource wdt_resources[] = {
+        {
+                .start  = AT91SAM9RL_BASE_WDT,
+                .end    = AT91SAM9RL_BASE_WDT + SZ_16 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
 static struct platform_device at91sam9rl_wdt_device = {
         .name           = "at91_wdt",
         .id             = -1,
-        .num_resources  = 0,
+        .resource       = wdt_resources,
+        .num_resources  = ARRAY_SIZE(wdt_resources),
 };
 
 static void __init at91_add_device_watchdog(void)
@@ -908,8 +917,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
         [0] = {
-                .start  = AT91_BASE_SYS + AT91_DBGU,
-                .end    = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+                .start  = AT91SAM9RL_BASE_DBGU,
+                .end    = AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 367d5cd5e362..2628384aaae1 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -63,13 +63,15 @@ static void __init onearm_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata onearm_eth_data = {
+static struct macb_platform_data __initdata onearm_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata onearm_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata onearm_udc_data = {
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 4282d96dffa8..3bb40694b02d 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -75,6 +75,8 @@ static void __init afeb9260_init_early(void)
  */
 static struct at91_usbh_data __initdata afeb9260_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata afeb9260_usbh_data = {
  */
 static struct at91_udc_data __initdata afeb9260_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -103,7 +105,7 @@ static struct spi_board_info afeb9260_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata afeb9260_macb_data = {
+static struct macb_platform_data __initdata afeb9260_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA9,
         .is_rmii        = 0,
 };
@@ -138,6 +140,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
         .bus_width_16   = 0,
         .parts          = afeb9260_nand_partition,
         .num_parts      = ARRAY_SIZE(afeb9260_nand_partition),
+        .det_pin        = -EINVAL,
 };
 
 
@@ -149,6 +152,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
         .wp_pin         = AT91_PIN_PC4,
         .slot_b         = 1,
         .wire4          = 1,
+        .vcc_pin        = -EINVAL,
 };
 
 
@@ -169,6 +173,8 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 static struct at91_cf_data afeb9260_cf_data = {
         .chipselect = 4,
         .irq_pin    = AT91_PIN_PA6,
+        .det_pin        = -EINVAL,
+        .vcc_pin        = -EINVAL,
         .rst_pin    = AT91_PIN_PA7,
         .flags      = AT91_CF_TRUE_IDE,
 };
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index f90cfb32bad2..8510e9e54988 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -62,6 +62,8 @@ static void __init cam60_init_early(void)
  */
 static struct at91_usbh_data __initdata cam60_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -115,7 +117,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata at91_eth_data cam60_macb_data = {
+static struct __initdata macb_platform_data cam60_macb_data = {
         .phy_irq_pin    = AT91_PIN_PB5,
         .is_rmii        = 0,
 };
@@ -135,7 +137,7 @@ static struct mtd_partition __initdata cam60_nand_partition[] = {
 static struct atmel_nand_data __initdata cam60_nand_data = {
         .ale            = 21,
         .cle            = 22,
-        // .det_pin     = ... not there
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA9,
         .enable_pin     = AT91_PIN_PA7,
         .parts          = cam60_nand_partition,
@@ -163,7 +165,7 @@ static struct sam9_smc_config __initdata cam60_nand_smc_config = {
 static void __init cam60_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &cam60_nand_smc_config);
+        sam9_smc_configure(0, 3, &cam60_nand_smc_config);
 
         at91_add_device_nand(&cam60_nand_data);
 }
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 5dffd3be62d2..ac3de4f7c31d 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -70,6 +70,8 @@ static void __init cap9adk_init_early(void)
  */
 static struct at91_usbh_data __initdata cap9adk_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -144,16 +146,17 @@ static struct spi_board_info cap9adk_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata cap9adk_mmc_data = {
         .wire4          = 1,
-//      .det_pin        = ... not connected
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata cap9adk_macb_data = {
+static struct macb_platform_data __initdata cap9adk_macb_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
@@ -172,8 +175,8 @@ static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
 static struct atmel_nand_data __initdata cap9adk_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
-//      .rdy_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .rdy_pin        = -EINVAL,
         .enable_pin     = AT91_PIN_PD15,
         .parts          = cap9adk_nand_partitions,
         .num_parts      = ARRAY_SIZE(cap9adk_nand_partitions),
@@ -212,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
                 cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &cap9adk_nand_smc_config);
+        sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
 
         at91_add_device_nand(&cap9adk_nand_data);
 }
@@ -282,7 +285,7 @@ static __init void cap9adk_add_device_nor(void)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
         /* configure chip-select 0 (NOR) */
-        sam9_smc_configure(0, &cap9adk_nor_smc_config);
+        sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
 
         platform_device_register(&cap9adk_nor_flash);
 }
@@ -351,7 +354,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
  * AC97
  */
 static struct ac97c_platform_data cap9adk_ac97_data = {
-//      .reset_pin      = ... not connected
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 774c87fcbd5b..59d9cf997537 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -57,13 +57,15 @@ static void __init carmeva_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata carmeva_eth_data = {
+static struct macb_platform_data __initdata carmeva_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata carmeva_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata carmeva_udc_data = {
@@ -75,8 +77,8 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //      .det_pin        = AT91_PIN_PB0,
 //      .rst_pin        = AT91_PIN_PC5,
-        // .irq_pin     = ... not connected
-        // .vcc_pin     = ... always powered
+        // .irq_pin     = -EINVAL,
+        // .vcc_pin     = -EINVAL,
 // };
 
 static struct at91_mmc_data __initdata carmeva_mmc_data = {
@@ -84,6 +86,7 @@ static struct at91_mmc_data __initdata carmeva_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PB10,
         .wp_pin         = AT91_PIN_PC14,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info carmeva_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index fc885a4ce243..9ab3d1ea326d 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -86,6 +86,8 @@ static void __init cpu9krea_init_early(void)
  */
 static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,13 +95,14 @@ static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
  */
 static struct at91_udc_data __initdata cpu9krea_udc_data = {
         .vbus_pin       = AT91_PIN_PC8,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata cpu9krea_macb_data = {
+static struct macb_platform_data __initdata cpu9krea_macb_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
@@ -112,6 +115,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
+        .det_pin        = -EINVAL,
 };
 
 #ifdef CONFIG_MACH_CPU9260
@@ -156,7 +160,7 @@ static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
 
 static void __init cpu9krea_add_device_nand(void)
 {
-        sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+        sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
         at91_add_device_nand(&cpu9krea_nand_data);
 }
 
@@ -238,7 +242,7 @@ static __init void cpu9krea_add_device_nor(void)
         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
 
         /* configure chip-select 0 (NOR) */
-        sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+        sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
 
         platform_device_register(&cpu9krea_nor_flash);
 }
@@ -337,6 +341,8 @@ static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .det_pin        = AT91_PIN_PA29,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static void __init cpu9krea_board_init(void)
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index d35e65b08ccd..368e1427ad99 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -82,12 +82,15 @@ static void __init cpuat91_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata cpuat91_eth_data = {
+static struct macb_platform_data __initdata cpuat91_eth_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata cpuat91_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata cpuat91_udc_data = {
@@ -98,6 +101,8 @@ static struct at91_udc_data __initdata cpuat91_udc_data = {
 static struct at91_mmc_data __initdata cpuat91_mmc_data = {
         .det_pin        = AT91_PIN_PC2,
         .wire4          = 1,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data cpuat91_flash_data = {
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index c3936665e645..1a1547b1ce4e 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -58,18 +58,20 @@ static void __init csb337_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata csb337_eth_data = {
+static struct macb_platform_data __initdata csb337_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC2,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb337_udc_data = {
-        // this has no VBUS sensing pin
         .pullup_pin     = AT91_PIN_PA24,
+        .vbus_pin       = -EINVAL,
 };
 
 static struct i2c_board_info __initdata csb337_i2c_devices[] = {
@@ -98,6 +100,7 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .wp_pin         = AT91_PIN_PD6,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct spi_board_info csb337_spi_devices[] = {
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 586100e2acbb..f650bf39455d 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -52,13 +52,15 @@ static void __init csb637_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata csb637_eth_data = {
+static struct macb_platform_data __initdata csb637_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC0,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata csb637_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata csb637_udc_data = {
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 0b7d32778210..bb6b434ec0c1 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -50,6 +50,7 @@ static void __init ek_init_early(void)
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC8,
         .enable_pin     = AT91_PIN_PC14,
 };
@@ -82,7 +83,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 45db7a3dbef0..d302ca3eeb64 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -60,13 +60,15 @@ static void __init eb9200_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata eb9200_eth_data = {
+static struct macb_platform_data __initdata eb9200_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata eb9200_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eb9200_udc_data = {
@@ -75,15 +77,18 @@ static struct at91_udc_data __initdata eb9200_udc_data = {
 };
 
 static struct at91_cf_data __initdata eb9200_cf_data = {
+        .irq_pin        = -EINVAL,
         .det_pin        = AT91_PIN_PB0,
+        .vcc_pin        = -EINVAL,
         .rst_pin        = AT91_PIN_PC5,
-        // .irq_pin     = ... not connected
-        // .vcc_pin     = ... always powered
 };
 
 static struct at91_mmc_data __initdata eb9200_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2f9c16d29212..69966ce4d776 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,18 +64,23 @@ static void __init ecb_at91init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata ecb_at91eth_data = {
+static struct macb_platform_data __initdata ecb_at91eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata ecb_at91usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata ecb_at91mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c722607b..07ef35b0ec2c 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -47,13 +47,15 @@ static void __init eco920_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata eco920_eth_data = {
+static struct macb_platform_data __initdata eco920_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC2,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata eco920_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata eco920_udc_data = {
@@ -64,6 +66,9 @@ static struct at91_udc_data __initdata eco920_udc_data = {
 static struct at91_mmc_data __initdata eco920_mmc_data = {
         .slot_b         = 0,
         .wire4          = 0,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct physmap_flash_data eco920_flash_data = {
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 4c3f65d9c59b..eec02cd57ced 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -52,12 +52,14 @@ static void __init flexibity_init_early(void)
 /* USB Host port */
 static struct at91_usbh_data __initdata flexibity_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /* USB Device port */
 static struct at91_udc_data __initdata flexibity_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /* SPI devices */
@@ -76,6 +78,7 @@ static struct at91_mmc_data __initdata flexibity_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PC9,
         .wp_pin         = AT91_PIN_PC4,
+        .vcc_pin        = -EINVAL,
 };
 
 /* LEDs */
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index f27d1a780cfa..caf017f0f4ee 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -106,6 +106,8 @@ static void __init foxg20_init_early(void)
  */
 static struct at91_usbh_data __initdata foxg20_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -113,7 +115,7 @@ static struct at91_usbh_data __initdata foxg20_usbh_data = {
  */
 static struct at91_udc_data __initdata foxg20_udc_data = {
         .vbus_pin       = AT91_PIN_PC6,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -135,7 +137,7 @@ static struct spi_board_info foxg20_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata foxg20_macb_data = {
+static struct macb_platform_data __initdata foxg20_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 1,
 };
@@ -147,6 +149,9 @@ static struct at91_eth_data __initdata foxg20_macb_data = {
 static struct at91_mmc_data __initdata foxg20_mmc_data = {
         .slot_b         = 1,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 2e95949737e6..230e71969fb7 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -80,6 +80,8 @@ static void __init gsia18s_init_early(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -87,13 +89,13 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata udc_data = {
         .vbus_pin       = AT91_PIN_PA22,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
         .phy_irq_pin    = AT91_PIN_PA28,
         .is_rmii        = 1,
 };
@@ -530,6 +532,7 @@ static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
 static struct at91_cf_data __initdata gsia18s_cf1_data = {
         .irq_pin        = AT91_PIN_PA27,
         .det_pin        = AT91_PIN_PB30,
+        .vcc_pin        = -EINVAL,
         .rst_pin        = AT91_PIN_PB31,
         .chipselect     = 5,
         .flags          = AT91_CF_TRUE_IDE,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 3bae73e63633..efde1b2327c8 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -61,13 +61,15 @@ static void __init kafa_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata kafa_eth_data = {
+static struct macb_platform_data __initdata kafa_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata kafa_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kafa_udc_data = {
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e61351ffad50..d75a4a2ad9c2 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,13 +69,15 @@ static void __init kb9202_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata kb9202_eth_data = {
+static struct macb_platform_data __initdata kb9202_eth_data = {
         .phy_irq_pin    = AT91_PIN_PB29,
         .is_rmii        = 0,
 };
 
 static struct at91_usbh_data __initdata kb9202_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata kb9202_udc_data = {
@@ -87,6 +89,8 @@ static struct at91_mmc_data __initdata kb9202_mmc_data = {
         .det_pin        = AT91_PIN_PB2,
         .slot_b         = 0,
         .wire4          = 1,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 static struct mtd_partition __initdata kb9202_nand_partition[] = {
@@ -100,7 +104,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
 static struct atmel_nand_data __initdata kb9202_nand_data = {
         .ale            = 22,
         .cle            = 21,
-        // .det_pin     = ... not there
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC29,
         .enable_pin     = AT91_PIN_PC28,
         .parts          = kb9202_nand_partition,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index ef816c17dc61..3f8617c0e04e 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -72,6 +72,7 @@ static void __init neocore926_init_early(void)
 static struct at91_usbh_data __initdata neocore926_usbh_data = {
         .ports          = 2,
         .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +80,7 @@ static struct at91_usbh_data __initdata neocore926_usbh_data = {
  */
 static struct at91_udc_data __initdata neocore926_udc_data = {
         .vbus_pin       = AT91_PIN_PA25,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -149,13 +150,14 @@ static struct at91_mmc_data __initdata neocore926_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PE18,
         .wp_pin         = AT91_PIN_PE19,
+        .vcc_pin        = -EINVAL,
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata neocore926_macb_data = {
+static struct macb_platform_data __initdata neocore926_macb_data = {
         .phy_irq_pin    = AT91_PIN_PE31,
         .is_rmii        = 1,
 };
@@ -190,6 +192,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
         .enable_pin             = AT91_PIN_PD15,
         .parts                  = neocore926_nand_partition,
         .num_parts              = ARRAY_SIZE(neocore926_nand_partition),
+        .det_pin                = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
@@ -213,7 +216,7 @@ static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
 static void __init neocore926_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &neocore926_nand_smc_config);
+        sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
 
         at91_add_device_nand(&neocore926_nand_data);
 }
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 49e3f699b48e..b4a12fc184c8 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -96,9 +96,9 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 static void __init add_device_pcontrol(void)
 {
         /* configure chip-select 4 (IO compatible to 8051  X4 ) */
-        sam9_smc_configure(4, &pcontrol_smc_config[0]);
+        sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
         /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A  D4 ) */
-        sam9_smc_configure(7, &pcontrol_smc_config[1]);
+        sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
 }
 
 
@@ -107,6 +107,8 @@ static void __init add_device_pcontrol(void)
  */
 static struct at91_usbh_data __initdata usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -122,7 +124,7 @@ static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
         .phy_irq_pin    = AT91_PIN_PA28,
         .is_rmii        = 1,
 };
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 0a8fe6a1b7c8..ab024fa11d5c 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -60,13 +60,15 @@ static void __init picotux200_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata picotux200_eth_data = {
+static struct macb_platform_data __initdata picotux200_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata picotux200_usbh_data = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
@@ -74,6 +76,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .wp_pin         = AT91_PIN_PA17,
+        .vcc_pin        = -EINVAL,
 };
 
 #define PICOTUX200_FLASH_BASE   AT91_CHIPSELECT_0
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 07421bdb88ea..e029d220cb84 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -77,6 +77,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -84,7 +86,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 /*
@@ -104,7 +106,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA31,
         .is_rmii        = 1,
 };
@@ -133,7 +135,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -161,7 +163,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 static void __init ek_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -172,9 +174,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
-//      .det_pin        = ... not connected
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 /*
@@ -251,7 +253,7 @@ static void __init ek_board_init(void)
         /* LEDs */
         at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
         /* shutdown controller, wakeup button (5 msec low) */
-        at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
+        at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
                                 | AT91_SHDW_RTTWKEN);
 }
 
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 80a8c9c6e922..782f37946af5 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -65,13 +65,15 @@ static void __init dk_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata dk_eth_data = {
+static struct macb_platform_data __initdata dk_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata dk_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata dk_udc_data = {
@@ -80,16 +82,19 @@ static struct at91_udc_data __initdata dk_udc_data = {
 };
 
 static struct at91_cf_data __initdata dk_cf_data = {
+        .irq_pin        = -EINVAL,
         .det_pin        = AT91_PIN_PB0,
+        .vcc_pin        = -EINVAL,
         .rst_pin        = AT91_PIN_PC5,
-        // .irq_pin     = ... not connected
-        // .vcc_pin     = ... always powered
 };
 
 #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -143,7 +148,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
         .cle            = 21,
         .det_pin        = AT91_PIN_PB1,
         .rdy_pin        = AT91_PIN_PC2,
-        // .enable_pin  = ... not there
+        .enable_pin     = -EINVAL,
         .parts          = dk_nand_partition,
         .num_parts      = ARRAY_SIZE(dk_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 99fd7f8aee0e..ef7c12a92246 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -65,13 +65,15 @@ static void __init ek_init_early(void)
         at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata ek_eth_data = {
+static struct macb_platform_data __initdata ek_eth_data = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
 
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata ek_udc_data = {
@@ -85,6 +87,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
         .wp_pin         = AT91_PIN_PA17,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index e927df0175df..af0750fafa29 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -60,7 +60,7 @@ static void __init rsi_ews_init_early(void)
 /*
  * Ethernet
  */
-static struct at91_eth_data rsi_ews_eth_data __initdata = {
+static struct macb_platform_data rsi_ews_eth_data __initdata = {
         .phy_irq_pin    = AT91_PIN_PC4,
         .is_rmii        = 1,
 };
@@ -70,6 +70,8 @@ static struct at91_eth_data rsi_ews_eth_data __initdata = {
  */
 static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
         .ports          = 1,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 072d53af98d9..84bce587735f 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -72,6 +72,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -79,7 +81,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -109,7 +111,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 0,
 };
@@ -134,7 +136,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -162,7 +164,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 static void __init ek_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -176,7 +178,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PC8,
         .wp_pin         = AT91_PIN_PC4,
-//      .vcc_pin        = ... not connected
+        .vcc_pin        = -EINVAL,
 };
 
 static void __init ek_board_init(void)
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4f10181a0782..be8233bcabdc 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -75,6 +75,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -82,7 +84,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -151,7 +153,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 1,
 };
@@ -176,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -211,7 +213,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -223,9 +225,9 @@ static void __init ek_add_device_nand(void)
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 1,
         .wire4          = 1,
-//      .det_pin        = ... not connected
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b005b738e8ff..40895072a1a7 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -131,7 +131,7 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 static void __init ek_add_device_dm9000(void)
 {
         /* Configure chip-select 2 (DM9000) */
-        sam9_smc_configure(2, &dm9000_smc_config);
+        sam9_smc_configure(0, 2, &dm9000_smc_config);
 
         /* Configure Reset signal as output */
         at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -151,6 +151,8 @@ static void __init ek_add_device_dm9000(void) {}
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -159,7 +161,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PB29,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -182,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 22,
         .cle            = 21,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC15,
         .enable_pin     = AT91_PIN_PC14,
         .parts          = ek_nand_partition,
@@ -217,7 +219,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -345,6 +347,9 @@ static struct spi_board_info ek_spi_devices[] = {
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index bccdcf23caa1..29f66052fe63 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -74,6 +74,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
         .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -81,7 +82,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PA25,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -151,14 +152,14 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PE18,
         .wp_pin         = AT91_PIN_PE19,
-//      .vcc_pin        = ... not connected
+        .vcc_pin        = -EINVAL,
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PE31,
         .is_rmii        = 1,
 };
@@ -183,7 +184,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
         .parts          = ek_nand_partition,
@@ -218,7 +219,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -353,6 +354,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 64fc75c9d0ac..843d6286c6f4 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -86,6 +86,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -93,7 +95,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PC5,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
@@ -123,7 +125,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PA7,
         .is_rmii        = 1,
 };
@@ -163,6 +165,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .cle            = 22,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
+        .det_pin        = -EINVAL,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -195,7 +198,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -210,6 +213,7 @@ static struct mci_platform_data __initdata ek_mmc_data = {
         .slot[1] = {
                 .bus_width      = 4,
                 .detect_pin     = AT91_PIN_PC9,
+                .wp_pin         = -EINVAL,
         },
 
 };
@@ -218,6 +222,8 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
         .slot_b         = 1,    /* Only one slot so use slot B */
         .wire4          = 1,
         .det_pin        = AT91_PIN_PC9,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -227,6 +233,7 @@ static void __init ek_add_device_mmc(void)
         if (ek_have_2mmc()) {
                 ek_mmc_data.slot[0].bus_width = 4;
                 ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+                ek_mmc_data.slot[0].wp_pin = -1;
         }
         at91_add_device_mci(0, &ek_mmc_data);
 #else
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 92de9127923a..ea0d1b9c2b7b 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -69,6 +69,7 @@ static void __init ek_init_early(void)
 static struct at91_usbh_data __initdata ek_usbh_hs_data = {
         .ports          = 2,
         .vbus_pin       = {AT91_PIN_PD1, AT91_PIN_PD3},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -100,6 +101,7 @@ static struct mci_platform_data __initdata mci0_data = {
         .slot[0] = {
                 .bus_width      = 4,
                 .detect_pin     = AT91_PIN_PD10,
+                .wp_pin         = -EINVAL,
         },
 };
 
@@ -115,7 +117,7 @@ static struct mci_platform_data __initdata mci1_data = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PD5,
         .is_rmii        = 1,
 };
@@ -143,6 +145,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .cle            = 22,
         .rdy_pin        = AT91_PIN_PC8,
         .enable_pin     = AT91_PIN_PC14,
+        .det_pin        = -EINVAL,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
@@ -175,7 +178,7 @@ static void __init ek_add_device_nand(void)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
 
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -330,6 +333,7 @@ static void __init ek_add_device_buttons(void) {}
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b2b748239f36..c1366d0032bf 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -67,8 +67,8 @@ static struct usba_platform_data __initdata ek_usba_udc_data = {
 static struct at91_mmc_data __initdata ek_mmc_data = {
         .wire4          = 1,
         .det_pin        = AT91_PIN_PA15,
-//      .wp_pin         = ... not connected
-//      .vcc_pin        = ... not connected
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 
@@ -91,7 +91,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PD17,
         .enable_pin     = AT91_PIN_PB6,
         .parts          = ek_nand_partition,
@@ -119,7 +119,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 static void __init ek_add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &ek_nand_smc_config);
+        sam9_smc_configure(0, 3, &ek_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -204,6 +204,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
  * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
+        .reset_pin      = -EINVAL,
 };
 
 
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 0df01c6e2d0c..4770db08e5a6 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -57,15 +57,19 @@ static void __init snapper9260_init_early(void)
 
 static struct at91_usbh_data __initdata snapper9260_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 static struct at91_udc_data __initdata snapper9260_udc_data = {
         .vbus_pin               = SNAPPER9260_IO_EXP_GPIO(5),
         .vbus_active_low        = 1,
         .vbus_polled            = 1,
+        .pullup_pin             = -EINVAL,
 };
 
-static struct at91_eth_data snapper9260_macb_data = {
+static struct macb_platform_data snapper9260_macb_data = {
+        .phy_irq_pin    = -EINVAL,
         .is_rmii        = 1,
 };
 
@@ -104,6 +108,8 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
         .parts          = snapper9260_nand_partitions,
         .num_parts      = ARRAY_SIZE(snapper9260_nand_partitions),
         .bus_width_16   = 0,
+        .enable_pin     = -EINVAL,
+        .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
@@ -149,7 +155,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
 static void __init snapper9260_add_device_nand(void)
 {
         at91_set_A_periph(AT91_PIN_PC14, 0);
-        sam9_smc_configure(3, &snapper9260_nand_smc_config);
+        sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
         at91_add_device_nand(&snapper9260_nand_data);
 }
 
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 936e5fd7f406..e8d3d5b88244 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -85,6 +85,7 @@ static struct atmel_nand_data __initdata nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
+        .det_pin        = -EINVAL,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {
@@ -108,7 +109,7 @@ static struct sam9_smc_config __initdata nand_smc_config = {
 static void __init add_device_nand(void)
 {
         /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(3, &nand_smc_config);
+        sam9_smc_configure(0, 3, &nand_smc_config);
 
         at91_add_device_nand(&nand_data);
 }
@@ -122,12 +123,17 @@ static void __init add_device_nand(void)
 static struct mci_platform_data __initdata mmc_data = {
         .slot[0] = {
                 .bus_width      = 4,
+                .detect_pin     = -1;
+                .wp_pin         = -1;
         },
 };
 #else
 static struct at91_mmc_data __initdata mmc_data = {
         .slot_b         = 0,
         .wire4          = 1,
+        .det_pin        = -EINVAL,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 #endif
 
@@ -137,6 +143,8 @@ static struct at91_mmc_data __initdata mmc_data = {
  */
 static struct at91_usbh_data __initdata usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 
@@ -145,19 +153,19 @@ static struct at91_usbh_data __initdata usbh_data = {
  */
 static struct at91_udc_data __initdata portuxg20_udc_data = {
         .vbus_pin       = AT91_PIN_PC7,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
         .vbus_pin       = AT91_PIN_PA22,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
         .phy_irq_pin    = AT91_PIN_PA28,
         .is_rmii        = 1,
 };
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 0a20bab21f99..26c36fc2d1e5 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -66,6 +66,8 @@ static void __init ek_init_early(void)
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
         .ports          = 2,
+        .vbus_pin       = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -73,7 +75,7 @@ static struct at91_usbh_data __initdata ek_usbh_data = {
  */
 static struct at91_udc_data __initdata ek_udc_data = {
         .vbus_pin       = AT91_PIN_PB11,
-        .pullup_pin     = 0,            /* pull-up driven by UDC */
+        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
 };
 
 static void __init ek_add_device_udc(void)
@@ -146,7 +148,7 @@ static void __init ek_add_device_spi(void)
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
         .phy_irq_pin    = AT91_PIN_PE31,
         .is_rmii        = 1,
 };
@@ -193,7 +195,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 static struct atmel_nand_data __initdata ek_nand_data = {
         .ale            = 21,
         .cle            = 22,
-//      .det_pin        = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
         .parts          = ek_nand_partition,
@@ -245,9 +247,9 @@ static void __init ek_add_device_nand(void)
 
         /* configure chip-select 3 (NAND) */
         if (machine_is_usb_a9g20())
-                sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+                sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
         else
-                sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+                sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);
 
         at91_add_device_nand(&ek_nand_data);
 }
@@ -344,7 +346,7 @@ static void __init ek_board_init(void)
                 /* I2C */
                 at91_add_device_i2c(NULL, 0);
                 /* shutdown controller, wakeup button (5 msec low) */
-                at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+                at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
                                 | AT91_SHDW_WKMODE0_LOW
                                 | AT91_SHDW_RTTWKEN);
         }
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 12a3f955162b..bbd553e1cd93 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -110,7 +110,7 @@ static struct gpio_led yl9200_leds[] = {
 /*
  * Ethernet
  */
-static struct at91_eth_data __initdata yl9200_eth_data = {
+static struct macb_platform_data __initdata yl9200_eth_data = {
         .phy_irq_pin            = AT91_PIN_PB28,
         .is_rmii                = 1,
 };
@@ -120,6 +120,8 @@ static struct at91_eth_data __initdata yl9200_eth_data = {
  */
 static struct at91_usbh_data __initdata yl9200_usbh_data = {
         .ports                  = 1,    /* PQFP version of AT91RM9200 */
+        .vbus_pin               = {-EINVAL, -EINVAL},
+        .overcurrent_pin= {-EINVAL, -EINVAL},
 };
 
 /*
@@ -137,8 +139,9 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
  */
 static struct at91_mmc_data __initdata yl9200_mmc_data = {
         .det_pin        = AT91_PIN_PB9,
-        // .wp_pin      = ... not connected
         .wire4          = 1,
+        .wp_pin         = -EINVAL,
+        .vcc_pin        = -EINVAL,
 };
 
 /*
@@ -175,7 +178,7 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 static struct atmel_nand_data __initdata yl9200_nand_data = {
         .ale            = 6,
         .cle            = 7,
-        // .det_pin     = ... not connected
+        .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
         .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
         .parts          = yl9200_nand_partition,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 938b34f57741..40309588f360 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -29,6 +29,7 @@ extern void __init at91_aic_init(unsigned int priority[]);
  /* Timer */
 struct sys_timer;
 extern struct sys_timer at91rm9200_timer;
+extern void at91sam926x_ioremap_pit(u32 addr);
 extern struct sys_timer at91sam926x_timer;
 extern struct sys_timer at91x40_timer;
 
@@ -59,14 +60,16 @@ extern void at91_irq_resume(void);
 /* reset */
 extern void at91sam9_alt_reset(void);
 
+/* shutdown */
+extern void at91_ioremap_shdwc(u32 base_addr);
+
  /* GPIO */
 #define AT91RM9200_PQFP         3       /* AT91RM9200 PQFP package has 3 banks */
 #define AT91RM9200_BGA          4       /* AT91RM9200 BGA package has 4 banks */
 
 struct at91_gpio_bank {
         unsigned short id;              /* peripheral ID */
-        unsigned long offset;           /* offset from system peripheral base */
-        struct clk *clock;              /* associated clock */
+        unsigned long regbase;          /* offset from system peripheral base */
 };
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 224e9e2f8674..74d6783eeabb 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -29,8 +29,9 @@
 struct at91_gpio_chip {
         struct gpio_chip        chip;
         struct at91_gpio_chip   *next;          /* Bank sharing same clock */
-        struct at91_gpio_bank   *bank;          /* Bank definition */
+        int                     id;             /* ID of register bank */
         void __iomem            *regbase;       /* Base of register bank */
+        struct clk              *clock;         /* associated clock */
 };
 
 #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
@@ -58,18 +59,17 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
         }
 
 static struct at91_gpio_chip gpio_chip[] = {
-        AT91_GPIO_CHIP("A", 0x00 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("B", 0x20 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("C", 0x40 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("D", 0x60 + PIN_BASE, 32),
-        AT91_GPIO_CHIP("E", 0x80 + PIN_BASE, 32),
+        AT91_GPIO_CHIP("pioA", 0x00, 32),
+        AT91_GPIO_CHIP("pioB", 0x20, 32),
+        AT91_GPIO_CHIP("pioC", 0x40, 32),
+        AT91_GPIO_CHIP("pioD", 0x60, 32),
+        AT91_GPIO_CHIP("pioE", 0x80, 32),
 };
 
 static int gpio_banks;
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
-        pin -= PIN_BASE;
         pin /= 32;
         if (likely(pin < gpio_banks))
                 return gpio_chip[pin].regbase;
@@ -79,7 +79,6 @@ static inline void __iomem *pin_to_controller(unsigned pin)
 
 static inline unsigned pin_to_mask(unsigned pin)
 {
-        pin -= PIN_BASE;
         return 1 << (pin % 32);
 }
 
@@ -274,8 +273,9 @@ static u32 backups[MAX_GPIO_BANKS];
 
 static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
 {
-        unsigned        mask = pin_to_mask(d->irq);
-        unsigned        bank = (d->irq - PIN_BASE) / 32;
+        unsigned        pin = irq_to_gpio(d->irq);
+        unsigned        mask = pin_to_mask(pin);
+        unsigned        bank = pin / 32;
 
         if (unlikely(bank >= MAX_GPIO_BANKS))
                 return -EINVAL;
@@ -285,7 +285,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
         else
                 wakeups[bank] &= ~mask;
 
-        irq_set_irq_wake(gpio_chip[bank].bank->id, state);
+        irq_set_irq_wake(gpio_chip[bank].id, state);
 
         return 0;
 }
@@ -302,7 +302,7 @@ void at91_gpio_suspend(void)
                 __raw_writel(wakeups[i], pio + PIO_IER);
 
                 if (!wakeups[i])
-                        clk_disable(gpio_chip[i].bank->clock);
+                        clk_disable(gpio_chip[i].clock);
                 else {
 #ifdef CONFIG_PM_DEBUG
                         printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
@@ -319,7 +319,7 @@ void at91_gpio_resume(void)
                 void __iomem    *pio = gpio_chip[i].regbase;
 
                 if (!wakeups[i])
-                        clk_enable(gpio_chip[i].bank->clock);
+                        clk_enable(gpio_chip[i].clock);
 
                 __raw_writel(wakeups[i], pio + PIO_IDR);
                 __raw_writel(backups[i], pio + PIO_IER);
@@ -344,8 +344,9 @@ void at91_gpio_resume(void)
 
 static void gpio_irq_mask(struct irq_data *d)
 {
-        void __iomem    *pio = pin_to_controller(d->irq);
-        unsigned        mask = pin_to_mask(d->irq);
+        unsigned        pin = irq_to_gpio(d->irq);
+        void __iomem    *pio = pin_to_controller(pin);
+        unsigned        mask = pin_to_mask(pin);
 
         if (pio)
                 __raw_writel(mask, pio + PIO_IDR);
@@ -353,8 +354,9 @@ static void gpio_irq_mask(struct irq_data *d)
 
 static void gpio_irq_unmask(struct irq_data *d)
 {
-        void __iomem    *pio = pin_to_controller(d->irq);
-        unsigned        mask = pin_to_mask(d->irq);
+        unsigned        pin = irq_to_gpio(d->irq);
+        void __iomem    *pio = pin_to_controller(pin);
+        unsigned        mask = pin_to_mask(pin);
 
         if (pio)
                 __raw_writel(mask, pio + PIO_IER);
@@ -382,7 +384,7 @@ static struct irq_chip gpio_irqchip = {
 
 static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-        unsigned        pin;
+        unsigned        irq_pin;
         struct irq_data *idata = irq_desc_get_irq_data(desc);
         struct irq_chip *chip = irq_data_get_irq_chip(idata);
         struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
@@ -405,12 +407,12 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
                         continue;
                 }
 
-                pin = at91_gpio->chip.base;
+                irq_pin = gpio_to_irq(at91_gpio->chip.base);
 
                 while (isr) {
                         if (isr & 1)
-                                generic_handle_irq(pin);
-                        pin++;
+                                generic_handle_irq(irq_pin);
+                        irq_pin++;
                         isr >>= 1;
                 }
         }
@@ -438,7 +440,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused)
                 seq_printf(s, "%i:\t", j);
 
                 for (bank = 0; bank < gpio_banks; bank++) {
-                        unsigned        pin  = PIN_BASE + (32 * bank) + j;
+                        unsigned        pin  = (32 * bank) + j;
                         void __iomem    *pio = pin_to_controller(pin);
                         unsigned        mask = pin_to_mask(pin);
 
@@ -491,27 +493,28 @@ static struct lock_class_key gpio_lock_class;
  */
 void __init at91_gpio_irq_setup(void)
 {
-        unsigned                pioc, pin;
+        unsigned                pioc, irq = gpio_to_irq(0);
         struct at91_gpio_chip   *this, *prev;
 
-        for (pioc = 0, pin = PIN_BASE, this = gpio_chip, prev = NULL;
+        for (pioc = 0, this = gpio_chip, prev = NULL;
                         pioc++ < gpio_banks;
                         prev = this, this++) {
-                unsigned        id = this->bank->id;
+                unsigned        id = this->id;
                 unsigned        i;
 
                 __raw_writel(~0, this->regbase + PIO_IDR);
 
-                for (i = 0, pin = this->chip.base; i < 32; i++, pin++) {
-                        irq_set_lockdep_class(pin, &gpio_lock_class);
+                for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32;
+                     i++, irq++) {
+                        irq_set_lockdep_class(irq, &gpio_lock_class);
 
                         /*
                          * Can use the "simple" and not "edge" handler since it's
                          * shorter, and the AIC handles interrupts sanely.
                          */
-                        irq_set_chip_and_handler(pin, &gpio_irqchip,
+                        irq_set_chip_and_handler(irq, &gpio_irqchip,
                                                  handle_simple_irq);
-                        set_irq_flags(pin, IRQF_VALID);
+                        set_irq_flags(irq, IRQF_VALID);
                 }
 
                 /* The toplevel handler handles one bank of GPIOs, except
@@ -524,7 +527,7 @@ void __init at91_gpio_irq_setup(void)
                 irq_set_chip_data(id, this);
                 irq_set_chained_handler(id, gpio_irq_handler);
         }
-        pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+        pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks);
 }
 
 /* gpiolib support */
@@ -612,16 +615,26 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
         for (i = 0; i < nr_banks; i++) {
                 at91_gpio = &gpio_chip[i];
 
-                at91_gpio->bank = &data[i];
-                at91_gpio->chip.base = PIN_BASE + i * 32;
-                at91_gpio->regbase = at91_gpio->bank->offset +
-                        (void __iomem *)AT91_VA_BASE_SYS;
+                at91_gpio->id = data[i].id;
+                at91_gpio->chip.base = i * 32;
+
+                at91_gpio->regbase = ioremap(data[i].regbase, 512);
+                if (!at91_gpio->regbase) {
+                        pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
+                        continue;
+                }
+
+                at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
+                if (!at91_gpio->clock) {
+                        pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
+                        continue;
+                }
 
                 /* enable PIO controller's clock */
-                clk_enable(at91_gpio->bank->clock);
+                clk_enable(at91_gpio->clock);
 
                 /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
-                if (last && last->bank->id == at91_gpio->bank->id)
+                if (last && last->id == at91_gpio->id)
                         last->next = at91_gpio;
                 last = at91_gpio;
 
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
index 03566799d3be..3045781c473f 100644
--- a/arch/arm/mach-at91/include/mach/at91_aic.h
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -16,7 +16,19 @@
 #ifndef AT91_AIC_H
 #define AT91_AIC_H
 
-#define AT91_AIC_SMR(n)         (AT91_AIC + ((n) * 4))  /* Source Mode Registers 0-31 */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_aic_base;
+
+#define at91_aic_read(field) \
+        __raw_readl(at91_aic_base + field)
+
+#define at91_aic_write(field, value) \
+        __raw_writel(value, at91_aic_base + field);
+#else
+.extern at91_aic_base
+#endif
+
+#define AT91_AIC_SMR(n)         ((n) * 4)               /* Source Mode Registers 0-31 */
 #define         AT91_AIC_PRIOR          (7 << 0)                /* Priority Level */
 #define         AT91_AIC_SRCTYPE        (3 << 5)                /* Interrupt Source Type */
 #define                 AT91_AIC_SRCTYPE_LOW            (0 << 5)
@@ -24,30 +36,30 @@
 #define                 AT91_AIC_SRCTYPE_HIGH           (2 << 5)
 #define                 AT91_AIC_SRCTYPE_RISING         (3 << 5)
 
-#define AT91_AIC_SVR(n)         (AT91_AIC + 0x80 + ((n) * 4))   /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR            (AT91_AIC + 0x100)      /* Interrupt Vector Register */
-#define AT91_AIC_FVR            (AT91_AIC + 0x104)      /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR            (AT91_AIC + 0x108)      /* Interrupt Status Register */
+#define AT91_AIC_SVR(n)         (0x80 + ((n) * 4))      /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR            0x100                   /* Interrupt Vector Register */
+#define AT91_AIC_FVR            0x104                   /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR            0x108                   /* Interrupt Status Register */
 #define         AT91_AIC_IRQID          (0x1f << 0)             /* Current Interrupt Identifier */
 
-#define AT91_AIC_IPR            (AT91_AIC + 0x10c)      /* Interrupt Pending Register */
-#define AT91_AIC_IMR            (AT91_AIC + 0x110)      /* Interrupt Mask Register */
-#define AT91_AIC_CISR           (AT91_AIC + 0x114)      /* Core Interrupt Status Register */
+#define AT91_AIC_IPR            0x10c                   /* Interrupt Pending Register */
+#define AT91_AIC_IMR            0x110                   /* Interrupt Mask Register */
+#define AT91_AIC_CISR           0x114                   /* Core Interrupt Status Register */
 #define         AT91_AIC_NFIQ           (1 << 0)                /* nFIQ Status */
 #define         AT91_AIC_NIRQ           (1 << 1)                /* nIRQ Status */
 
-#define AT91_AIC_IECR           (AT91_AIC + 0x120)      /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR           (AT91_AIC + 0x124)      /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR           (AT91_AIC + 0x128)      /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR           (AT91_AIC + 0x12c)      /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR          (AT91_AIC + 0x130)      /* End of Interrupt Command Register */
-#define AT91_AIC_SPU            (AT91_AIC + 0x134)      /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR            (AT91_AIC + 0x138)      /* Debug Control Register */
+#define AT91_AIC_IECR           0x120                   /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR           0x124                   /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR           0x128                   /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR           0x12c                   /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR          0x130                   /* End of Interrupt Command Register */
+#define AT91_AIC_SPU            0x134                   /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR            0x138                   /* Debug Control Register */
 #define         AT91_AIC_DCR_PROT       (1 << 0)                /* Protection Mode */
 #define         AT91_AIC_DCR_GMSK       (1 << 1)                /* General Mask */
 
-#define AT91_AIC_FFER           (AT91_AIC + 0x140)      /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR           (AT91_AIC + 0x144)      /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR           (AT91_AIC + 0x148)      /* Fast Forcing Status Register [SAM9 only] */
+#define AT91_AIC_FFER           0x140                   /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR           0x144                   /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR           0x148                   /* Fast Forcing Status Register [SAM9 only] */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index dbfe455a4c41..2aa0c5e13495 100644
--- a/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -19,7 +19,7 @@
 #define dbgu_readl(dbgu, field) \
         __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field)
 
-#ifdef AT91_DBGU
+#if !defined(CONFIG_ARCH_AT91X40)
 #define AT91_DBGU_CR            (0x00)  /* Control Register */
 #define AT91_DBGU_MR            (0x04)  /* Mode Register */
 #define AT91_DBGU_IER           (0x08)  /* Interrupt Enable Register */
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 974d0bd05b5b..d1f80ad7f4d4 100644
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -16,16 +16,16 @@
 #ifndef AT91_PIT_H
 #define AT91_PIT_H
 
-#define AT91_PIT_MR             (AT91_PIT + 0x00)       /* Mode Register */
+#define AT91_PIT_MR             0x00                    /* Mode Register */
 #define         AT91_PIT_PITIEN         (1 << 25)               /* Timer Interrupt Enable */
 #define         AT91_PIT_PITEN          (1 << 24)               /* Timer Enabled */
 #define         AT91_PIT_PIV            (0xfffff)               /* Periodic Interval Value */
 
-#define AT91_PIT_SR             (AT91_PIT + 0x04)       /* Status Register */
+#define AT91_PIT_SR             0x04                    /* Status Register */
 #define         AT91_PIT_PITS           (1 << 0)                /* Timer Status */
 
-#define AT91_PIT_PIVR           (AT91_PIT + 0x08)       /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR           (AT91_PIT + 0x0c)       /* Periodic Interval Image Register */
+#define AT91_PIT_PIVR           0x08                    /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR           0x0c                    /* Periodic Interval Image Register */
 #define         AT91_PIT_PICNT          (0xfff << 20)           /* Interval Counter */
 #define         AT91_PIT_CPIV           (0xfffff)               /* Inverval Value */
 
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
index e56f4701a3e5..da1945e5f714 100644
--- a/arch/arm/mach-at91/include/mach/at91_rtc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -16,7 +16,7 @@
 #ifndef AT91_RTC_H
 #define AT91_RTC_H
 
-#define AT91_RTC_CR             (AT91_RTC + 0x00)       /* Control Register */
+#define AT91_RTC_CR             0x00                    /* Control Register */
 #define         AT91_RTC_UPDTIM         (1 <<  0)               /* Update Request Time Register */
 #define         AT91_RTC_UPDCAL         (1 <<  1)               /* Update Request Calendar Register */
 #define         AT91_RTC_TIMEVSEL       (3 <<  8)               /* Time Event Selection */
@@ -29,44 +29,44 @@
 #define                 AT91_RTC_CALEVSEL_MONTH         (1 << 16)
 #define                 AT91_RTC_CALEVSEL_YEAR          (2 << 16)
 
-#define AT91_RTC_MR             (AT91_RTC + 0x04)       /* Mode Register */
+#define AT91_RTC_MR             0x04                    /* Mode Register */
 #define                 AT91_RTC_HRMOD          (1 <<  0)               /* 12/24 Hour Mode */
 
-#define AT91_RTC_TIMR           (AT91_RTC + 0x08)       /* Time Register */
+#define AT91_RTC_TIMR           0x08                    /* Time Register */
 #define         AT91_RTC_SEC            (0x7f <<  0)            /* Current Second */
 #define         AT91_RTC_MIN            (0x7f <<  8)            /* Current Minute */
 #define         AT91_RTC_HOUR           (0x3f << 16)            /* Current Hour */
 #define         AT91_RTC_AMPM           (1    << 22)            /* Ante Meridiem Post Meridiem Indicator */
 
-#define AT91_RTC_CALR           (AT91_RTC + 0x0c)       /* Calendar Register */
+#define AT91_RTC_CALR           0x0c                    /* Calendar Register */
 #define         AT91_RTC_CENT           (0x7f <<  0)            /* Current Century */
 #define         AT91_RTC_YEAR           (0xff <<  8)            /* Current Year */
 #define         AT91_RTC_MONTH          (0x1f << 16)            /* Current Month */
 #define         AT91_RTC_DAY            (7    << 21)            /* Current Day */
 #define         AT91_RTC_DATE           (0x3f << 24)            /* Current Date */
 
-#define AT91_RTC_TIMALR         (AT91_RTC + 0x10)       /* Time Alarm Register */
+#define AT91_RTC_TIMALR         0x10                    /* Time Alarm Register */
 #define         AT91_RTC_SECEN          (1 <<  7)               /* Second Alarm Enable */
 #define         AT91_RTC_MINEN          (1 << 15)               /* Minute Alarm Enable */
 #define         AT91_RTC_HOUREN         (1 << 23)               /* Hour Alarm Enable */
 
-#define AT91_RTC_CALALR         (AT91_RTC + 0x14)       /* Calendar Alarm Register */
+#define AT91_RTC_CALALR         0x14                    /* Calendar Alarm Register */
 #define         AT91_RTC_MTHEN          (1 << 23)               /* Month Alarm Enable */
 #define         AT91_RTC_DATEEN         (1 << 31)               /* Date Alarm Enable */
 
-#define AT91_RTC_SR             (AT91_RTC + 0x18)       /* Status Register */
+#define AT91_RTC_SR             0x18                    /* Status Register */
 #define         AT91_RTC_ACKUPD         (1 <<  0)               /* Acknowledge for Update */
 #define         AT91_RTC_ALARM          (1 <<  1)               /* Alarm Flag */
 #define         AT91_RTC_SECEV          (1 <<  2)               /* Second Event */
 #define         AT91_RTC_TIMEV          (1 <<  3)               /* Time Event */
 #define         AT91_RTC_CALEV          (1 <<  4)               /* Calendar Event */
 
-#define AT91_RTC_SCCR           (AT91_RTC + 0x1c)       /* Status Clear Command Register */
-#define AT91_RTC_IER            (AT91_RTC + 0x20)       /* Interrupt Enable Register */
-#define AT91_RTC_IDR            (AT91_RTC + 0x24)       /* Interrupt Disable Register */
-#define AT91_RTC_IMR            (AT91_RTC + 0x28)       /* Interrupt Mask Register */
+#define AT91_RTC_SCCR           0x1c                    /* Status Clear Command Register */
+#define AT91_RTC_IER            0x20                    /* Interrupt Enable Register */
+#define AT91_RTC_IDR            0x24                    /* Interrupt Disable Register */
+#define AT91_RTC_IMR            0x28                    /* Interrupt Mask Register */
 
-#define AT91_RTC_VER            (AT91_RTC + 0x2c)       /* Valid Entry Register */
+#define AT91_RTC_VER            0x2c                    /* Valid Entry Register */
 #define         AT91_RTC_NVTIM          (1 <<  0)               /* Non valid Time */
 #define         AT91_RTC_NVCAL          (1 <<  1)               /* Non valid Calendar */
 #define         AT91_RTC_NVTIMALR       (1 <<  2)               /* Non valid Time Alarm */
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index c4ce07e8a8fa..1d4fe822c77a 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -16,11 +16,21 @@
 #ifndef AT91_SHDWC_H
 #define AT91_SHDWC_H
 
-#define AT91_SHDW_CR            (AT91_SHDWC + 0x00)     /* Shut Down Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_shdwc_base;
+
+#define at91_shdwc_read(field) \
+        __raw_readl(at91_shdwc_base + field)
+
+#define at91_shdwc_write(field, value) \
+        __raw_writel(value, at91_shdwc_base + field);
+#endif
+
+#define AT91_SHDW_CR            0x00                    /* Shut Down Control Register */
 #define         AT91_SHDW_SHDW          (1    << 0)             /* Shut Down command */
 #define         AT91_SHDW_KEY           (0xa5 << 24)            /* KEY Password */
 
-#define AT91_SHDW_MR            (AT91_SHDWC + 0x04)     /* Shut Down Mode Register */
+#define AT91_SHDW_MR            0x04                    /* Shut Down Mode Register */
 #define         AT91_SHDW_WKMODE0       (3 << 0)                /* Wake-up 0 Mode Selection */
 #define                 AT91_SHDW_WKMODE0_NONE          0
 #define                 AT91_SHDW_WKMODE0_HIGH          1
@@ -30,7 +40,7 @@
 #define                 AT91_SHDW_CPTWK0_(x)    ((x) << 4)
 #define         AT91_SHDW_RTTWKEN       (1   << 16)             /* Real Time Timer Wake-up Enable */
 
-#define AT91_SHDW_SR            (AT91_SHDWC + 0x08)     /* Shut Down Status Register */
+#define AT91_SHDW_SR            0x08                    /* Shut Down Status Register */
 #define         AT91_SHDW_WAKEUP0       (1 <<  0)               /* Wake-up 0 Status */
 #define         AT91_SHDW_RTTWK         (1 << 16)               /* Real-time Timer Wake-up */
 #define         AT91_SHDW_RTCWK         (1 << 17)               /* Real-time Clock Wake-up [SAM9RL] */
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index c5df1e8f1955..4c0e2f6011d7 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -79,29 +79,28 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC        (0xffffe200 - AT91_BASE_SYS)
 #define AT91_BCRAMC     (0xffffe400 - AT91_BASE_SYS)
 #define AT91_DDRSDRC0   (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffea00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffeb10 - AT91_BASE_SYS)
-#define AT91_DMA        (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffff800 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (cpu_is_at91cap9_revB() ?       \
                         (0xfffffd50 - AT91_BASE_SYS) :  \
                         (0xfffffd60 - AT91_BASE_SYS))
 
+#define AT91CAP9_BASE_ECC       0xffffe200
+#define AT91CAP9_BASE_DMA       0xffffec00
+#define AT91CAP9_BASE_SMC       0xffffe800
+#define AT91CAP9_BASE_DBGU      AT91_BASE_DBGU1
+#define AT91CAP9_BASE_PIOA      0xfffff200
+#define AT91CAP9_BASE_PIOB      0xfffff400
+#define AT91CAP9_BASE_PIOC      0xfffff600
+#define AT91CAP9_BASE_PIOD      0xfffff800
+#define AT91CAP9_BASE_SHDWC     0xfffffd10
+#define AT91CAP9_BASE_RTT       0xfffffd20
+#define AT91CAP9_BASE_PIT       0xfffffd30
+#define AT91CAP9_BASE_WDT       0xfffffd40
+
 #define AT91_USART0     AT91CAP9_BASE_US0
 #define AT91_USART1     AT91CAP9_BASE_US1
 #define AT91_USART2     AT91CAP9_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index e4037b500302..bacb51141819 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -79,17 +79,17 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)    /* Advanced Interrupt Controller */
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)    /* Debug Unit */
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)    /* PIO Controller A */
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)    /* PIO Controller B */
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)    /* PIO Controller C */
-#define AT91_PIOD       (0xfffffa00 - AT91_BASE_SYS)    /* PIO Controller D */
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)    /* Power Management Controller */
 #define AT91_ST         (0xfffffd00 - AT91_BASE_SYS)    /* System Timer */
-#define AT91_RTC        (0xfffffe00 - AT91_BASE_SYS)    /* Real-Time Clock */
 #define AT91_MC         (0xffffff00 - AT91_BASE_SYS)    /* Memory Controllers */
 
+#define AT91RM9200_BASE_DBGU    AT91_BASE_DBGU0 /* Debug Unit */
+#define AT91RM9200_BASE_PIOA    0xfffff400      /* PIO Controller A */
+#define AT91RM9200_BASE_PIOB    0xfffff600      /* PIO Controller B */
+#define AT91RM9200_BASE_PIOC    0xfffff800      /* PIO Controller C */
+#define AT91RM9200_BASE_PIOD    0xfffffa00      /* PIO Controller D */
+#define AT91RM9200_BASE_RTC     0xfffffe00      /* Real-Time Clock */
+
 #define AT91_USART0     AT91RM9200_BASE_US0
 #define AT91_USART1     AT91RM9200_BASE_US1
 #define AT91_USART2     AT91RM9200_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 9a791165913f..f937c476bb67 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -80,24 +80,23 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_SDRAMC0    (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd50 - AT91_BASE_SYS)
 
+#define AT91SAM9260_BASE_ECC    0xffffe800
+#define AT91SAM9260_BASE_SMC    0xffffec00
+#define AT91SAM9260_BASE_DBGU   AT91_BASE_DBGU0
+#define AT91SAM9260_BASE_PIOA   0xfffff400
+#define AT91SAM9260_BASE_PIOB   0xfffff600
+#define AT91SAM9260_BASE_PIOC   0xfffff800
+#define AT91SAM9260_BASE_SHDWC  0xfffffd10
+#define AT91SAM9260_BASE_RTT    0xfffffd20
+#define AT91SAM9260_BASE_PIT    0xfffffd30
+#define AT91SAM9260_BASE_WDT    0xfffffd40
+
 #define AT91_USART0     AT91SAM9260_BASE_US0
 #define AT91_USART1     AT91SAM9260_BASE_US1
 #define AT91_USART2     AT91SAM9260_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index ce596204cefa..175604e261be 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -66,21 +66,21 @@
  * System Peripherals (offset from AT91_BASE_SYS)
  */
 #define AT91_SDRAMC0    (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd50 - AT91_BASE_SYS)
 
+#define AT91SAM9261_BASE_SMC    0xffffec00
+#define AT91SAM9261_BASE_DBGU   AT91_BASE_DBGU0
+#define AT91SAM9261_BASE_PIOA   0xfffff400
+#define AT91SAM9261_BASE_PIOB   0xfffff600
+#define AT91SAM9261_BASE_PIOC   0xfffff800
+#define AT91SAM9261_BASE_SHDWC  0xfffffd10
+#define AT91SAM9261_BASE_RTT    0xfffffd20
+#define AT91SAM9261_BASE_PIT    0xfffffd30
+#define AT91SAM9261_BASE_WDT    0xfffffd40
+
 #define AT91_USART0     AT91SAM9261_BASE_US0
 #define AT91_USART1     AT91SAM9261_BASE_US1
 #define AT91_USART2     AT91SAM9261_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index f1b92961a2b1..80c915002d83 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -74,30 +74,29 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC0       (0xffffe000 - AT91_BASE_SYS)
 #define AT91_SDRAMC0    (0xffffe200 - AT91_BASE_SYS)
-#define AT91_SMC0       (0xffffe400 - AT91_BASE_SYS)
-#define AT91_ECC1       (0xffffe600 - AT91_BASE_SYS)
 #define AT91_SDRAMC1    (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SMC1       (0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffec00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffed10 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE       (0xfffffa00 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT0       (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_RTT1       (0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd60 - AT91_BASE_SYS)
 
+#define AT91SAM9263_BASE_ECC0   0xffffe000
+#define AT91SAM9263_BASE_SMC0   0xffffe400
+#define AT91SAM9263_BASE_ECC1   0xffffe600
+#define AT91SAM9263_BASE_SMC1   0xffffea00
+#define AT91SAM9263_BASE_DBGU   AT91_BASE_DBGU1
+#define AT91SAM9263_BASE_PIOA   0xfffff200
+#define AT91SAM9263_BASE_PIOB   0xfffff400
+#define AT91SAM9263_BASE_PIOC   0xfffff600
+#define AT91SAM9263_BASE_PIOD   0xfffff800
+#define AT91SAM9263_BASE_PIOE   0xfffffa00
+#define AT91SAM9263_BASE_SHDWC  0xfffffd10
+#define AT91SAM9263_BASE_RTT0   0xfffffd20
+#define AT91SAM9263_BASE_PIT    0xfffffd30
+#define AT91SAM9263_BASE_WDT    0xfffffd40
+#define AT91SAM9263_BASE_RTT1   0xfffffd50
+
 #define AT91_USART0     AT91SAM9263_BASE_US0
 #define AT91_USART1     AT91SAM9263_BASE_US1
 #define AT91_USART2     AT91SAM9263_BASE_US2
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index 57de6207e57e..eb18a70fa647 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -16,7 +16,9 @@
 #ifndef AT91SAM9_SMC_H
 #define AT91SAM9_SMC_H
 
-#define AT91_SMC_SETUP(n)       (AT91_SMC + 0x00 + ((n)*0x10))  /* Setup Register for CS n */
+#include <mach/cpu.h>
+
+#define AT91_SMC_SETUP          0x00                            /* Setup Register for CS n */
 #define         AT91_SMC_NWESETUP       (0x3f << 0)                     /* NWE Setup Length */
 #define                 AT91_SMC_NWESETUP_(x)   ((x) << 0)
 #define         AT91_SMC_NCS_WRSETUP    (0x3f << 8)                     /* NCS Setup Length in Write Access */
@@ -26,7 +28,7 @@
 #define         AT91_SMC_NCS_RDSETUP    (0x3f << 24)                    /* NCS Setup Length in Read Access */
 #define                 AT91_SMC_NCS_RDSETUP_(x)        ((x) << 24)
 
-#define AT91_SMC_PULSE(n)       (AT91_SMC + 0x04 + ((n)*0x10))  /* Pulse Register for CS n */
+#define AT91_SMC_PULSE          0x04                            /* Pulse Register for CS n */
 #define         AT91_SMC_NWEPULSE       (0x7f <<  0)                    /* NWE Pulse Length */
 #define                 AT91_SMC_NWEPULSE_(x)   ((x) << 0)
 #define         AT91_SMC_NCS_WRPULSE    (0x7f <<  8)                    /* NCS Pulse Length in Write Access */
@@ -36,13 +38,13 @@
 #define         AT91_SMC_NCS_RDPULSE    (0x7f << 24)                    /* NCS Pulse Length in Read Access */
 #define                 AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
 
-#define AT91_SMC_CYCLE(n)       (AT91_SMC + 0x08 + ((n)*0x10))  /* Cycle Register for CS n */
+#define AT91_SMC_CYCLE          0x08                            /* Cycle Register for CS n */
 #define         AT91_SMC_NWECYCLE       (0x1ff << 0 )                   /* Total Write Cycle Length */
 #define                 AT91_SMC_NWECYCLE_(x)   ((x) << 0)
 #define         AT91_SMC_NRDCYCLE       (0x1ff << 16)                   /* Total Read Cycle Length */
 #define                 AT91_SMC_NRDCYCLE_(x)   ((x) << 16)
 
-#define AT91_SMC_MODE(n)        (AT91_SMC + 0x0c + ((n)*0x10))  /* Mode Register for CS n */
+#define AT91_SMC_MODE           0x0c                            /* Mode Register for CS n */
 #define         AT91_SMC_READMODE       (1 <<  0)                       /* Read Mode */
 #define         AT91_SMC_WRITEMODE      (1 <<  1)                       /* Write Mode */
 #define         AT91_SMC_EXNWMODE       (3 <<  4)                       /* NWAIT Mode */
@@ -66,11 +68,4 @@
 #define                 AT91_SMC_PS_16                  (2 << 28)
 #define                 AT91_SMC_PS_32                  (3 << 28)
 
-#if defined(AT91_SMC1)          /* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)      (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)      (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)      (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)       (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#endif
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 406bb6496805..f0c23c960dec 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -86,27 +86,27 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_ECC        (0xffffe200 - AT91_BASE_SYS)
 #define AT91_DDRSDRC1   (0xffffe400 - AT91_BASE_SYS)
 #define AT91_DDRSDRC0   (0xffffe600 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffea00 - AT91_BASE_SYS)
-#define AT91_DMA        (0xffffec00 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOE       (0xfffffa00 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC        (0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91SAM9G45_BASE_ECC    0xffffe200
+#define AT91SAM9G45_BASE_DMA    0xffffec00
+#define AT91SAM9G45_BASE_SMC    0xffffe800
+#define AT91SAM9G45_BASE_DBGU   AT91_BASE_DBGU1
+#define AT91SAM9G45_BASE_PIOA   0xfffff200
+#define AT91SAM9G45_BASE_PIOB   0xfffff400
+#define AT91SAM9G45_BASE_PIOC   0xfffff600
+#define AT91SAM9G45_BASE_PIOD   0xfffff800
+#define AT91SAM9G45_BASE_PIOE   0xfffffa00
+#define AT91SAM9G45_BASE_SHDWC  0xfffffd10
+#define AT91SAM9G45_BASE_RTT    0xfffffd20
+#define AT91SAM9G45_BASE_PIT    0xfffffd30
+#define AT91SAM9G45_BASE_WDT    0xfffffd40
+#define AT91SAM9G45_BASE_RTC    0xfffffdb0
 
 #define AT91_USART0     AT91SAM9G45_BASE_US0
 #define AT91_USART1     AT91SAM9G45_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 1aabacd315d4..2bb359e60b97 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -69,27 +69,26 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_DMA        (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC        (0xffffe800 - AT91_BASE_SYS)
 #define AT91_SDRAMC0    (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC        (0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX     (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG       (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU       (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA       (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB       (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC       (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD       (0xfffffa00 - AT91_BASE_SYS)
 #define AT91_PMC        (0xfffffc00 - AT91_BASE_SYS)
 #define AT91_RSTC       (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC      (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT        (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT        (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT        (0xfffffd40 - AT91_BASE_SYS)
 #define AT91_SCKCR      (0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR       (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC        (0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91SAM9RL_BASE_DMA     0xffffe600
+#define AT91SAM9RL_BASE_ECC     0xffffe800
+#define AT91SAM9RL_BASE_SMC     0xffffec00
+#define AT91SAM9RL_BASE_DBGU    AT91_BASE_DBGU0
+#define AT91SAM9RL_BASE_PIOA    0xfffff400
+#define AT91SAM9RL_BASE_PIOB    0xfffff600
+#define AT91SAM9RL_BASE_PIOC    0xfffff800
+#define AT91SAM9RL_BASE_PIOD    0xfffffa00
+#define AT91SAM9RL_BASE_SHDWC   0xfffffd10
+#define AT91SAM9RL_BASE_RTT     0xfffffd20
+#define AT91SAM9RL_BASE_PIT     0xfffffd30
+#define AT91SAM9RL_BASE_WDT     0xfffffd40
+#define AT91SAM9RL_BASE_RTC     0xfffffe00
 
 #define AT91_USART0     AT91SAM9RL_BASE_US0
 #define AT91_USART1     AT91SAM9RL_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index a152ff87e688..a57829f4fd18 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -40,7 +40,6 @@
 #define AT91_PIOA       (0xffff0000 - AT91_BASE_SYS)    /* PIO Controller A */
 #define AT91_PS         (0xffff4000 - AT91_BASE_SYS)    /* Power Save */
 #define AT91_WD         (0xffff8000 - AT91_BASE_SYS)    /* Watchdog Timer */
-#define AT91_AIC        (0xfffff000 - AT91_BASE_SYS)    /* Advanced Interrupt Controller */
 
 /*
  * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index eac92e995bb5..d0b377b21bd7 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -40,13 +40,14 @@
 #include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
 #include <linux/serial.h>
+#include <linux/platform_data/macb.h>
 
  /* USB Device */
 struct at91_udc_data {
-        u8      vbus_pin;               /* high == host powering us */
+        int     vbus_pin;               /* high == host powering us */
         u8      vbus_active_low;        /* vbus polarity */
         u8      vbus_polled;            /* Use polling, not interrupt */
-        u8      pullup_pin;             /* active == D+ pulled up */
+        int     pullup_pin;             /* active == D+ pulled up */
         u8      pullup_active_low;      /* true == pullup_pin is active low */
 };
 extern void __init at91_add_device_udc(struct at91_udc_data *data);
@@ -56,10 +57,10 @@ extern void __init at91_add_device_usba(struct usba_platform_data *data);
 
  /* Compact Flash */
 struct at91_cf_data {
-        u8      irq_pin;                /* I/O IRQ */
-        u8      det_pin;                /* Card detect */
-        u8      vcc_pin;                /* power switching */
-        u8      rst_pin;                /* card reset */
+        int     irq_pin;                /* I/O IRQ */
+        int     det_pin;                /* Card detect */
+        int     vcc_pin;                /* power switching */
+        int     rst_pin;                /* card reset */
         u8      chipselect;             /* EBI Chip Select number */
         u8      flags;
 #define AT91_CF_TRUE_IDE        0x01
@@ -70,37 +71,26 @@ extern void __init at91_add_device_cf(struct at91_cf_data *data);
  /* MMC / SD */
   /* at91_mci platform config */
 struct at91_mmc_data {
-        u8              det_pin;        /* card detect IRQ */
+        int             det_pin;        /* card detect IRQ */
         unsigned        slot_b:1;       /* uses Slot B */
         unsigned        wire4:1;        /* (SD) supports DAT0..DAT3 */
-        u8              wp_pin;         /* (SD) writeprotect detect */
-        u8              vcc_pin;        /* power switching (high == on) */
+        int             wp_pin;         /* (SD) writeprotect detect */
+        int             vcc_pin;        /* power switching (high == on) */
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
   /* atmel-mci platform config */
 extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
 
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
-        u32             phy_mask;
-        u8              phy_irq_pin;    /* PHY IRQ */
-        u8              is_rmii;        /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
-        || defined(CONFIG_ARCH_AT91SAM9G45)
-#define eth_platform_data       at91_eth_data
-#endif
+extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
 struct at91_usbh_data {
         u8              ports;          /* number of ports on root hub */
-        u8              vbus_pin[2];    /* port power-control pin */
+        int             vbus_pin[2];    /* port power-control pin */
         u8              vbus_pin_inverted;
         u8              overcurrent_supported;
-        u8              overcurrent_pin[2];
+        int             overcurrent_pin[2];
         u8              overcurrent_status[2];
         u8              overcurrent_changed[2];
 };
@@ -110,9 +100,9 @@ extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
-        u8              enable_pin;     /* chip enable */
-        u8              det_pin;        /* card detect */
-        u8              rdy_pin;        /* ready/busy */
+        int             enable_pin;     /* chip enable */
+        int             det_pin;        /* card detect */
+        int             rdy_pin;        /* ready/busy */
         u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
         u8              ale;            /* address line number connected to ALE */
         u8              cle;            /* address line number connected to CLE */
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 0ed8648c6452..c6bb9e2d9baa 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,9 +14,15 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
+#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
+#define AT91_DBGU AT91_BASE_DBGU0
+#else
+#define AT91_DBGU AT91_BASE_DBGU1
+#endif
+
         .macro  addruart, rp, rv, tmp
-        ldr     \rp, =(AT91_BASE_SYS + AT91_DBGU)       @ System peripherals (phys address)
-        ldr     \rv, =(AT91_VA_BASE_SYS + AT91_DBGU)    @ System peripherals (virt address)
+        ldr     \rp, =AT91_DBGU                         @ System peripherals (phys address)
+        ldr     \rv, =AT91_IO_P2V(AT91_DBGU)            @ System peripherals (virt address)
         .endm
 
         .macro  senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 7ab68f972227..423eea0ed74c 100644
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -17,16 +17,17 @@
         .endm
 
         .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =(AT91_VA_BASE_SYS + AT91_AIC)           @ base virtual address of AIC peripheral
+        ldr     \base, =at91_aic_base           @ base virtual address of AIC peripheral
+        ldr     \base, [\base]
         .endm
 
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
 
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-        ldr     \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]     @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-        ldr     \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]   @ read interrupt source number
-        teq     \irqstat, #0                                    @ ISR is 0 when no current interrupt, or spurious interrupt
-        streq   \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]     @ not going to be handled further, then ACK it now.
+        ldr     \irqnr, [\base, #AT91_AIC_IVR]          @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+        ldr     \irqstat, [\base, #AT91_AIC_ISR]        @ read interrupt source number
+        teq     \irqstat, #0                            @ ISR is 0 when no current interrupt, or spurious interrupt
+        streq   \tmp, [\base, #AT91_AIC_EOICR]          @ not going to be handled further, then ACK it now.
         .endm
 
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 2b9a1f51210f..e3fd225121c7 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -16,177 +16,175 @@
 #include <linux/kernel.h>
 #include <asm/irq.h>
 
-#define PIN_BASE                NR_AIC_IRQS
-
 #define MAX_GPIO_BANKS          5
-#define NR_BUILTIN_GPIO         (PIN_BASE + (MAX_GPIO_BANKS * 32))
+#define NR_BUILTIN_GPIO         (MAX_GPIO_BANKS * 32)
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
-#define AT91_PIN_PA0    (PIN_BASE + 0x00 + 0)
-#define AT91_PIN_PA1    (PIN_BASE + 0x00 + 1)
-#define AT91_PIN_PA2    (PIN_BASE + 0x00 + 2)
-#define AT91_PIN_PA3    (PIN_BASE + 0x00 + 3)
-#define AT91_PIN_PA4    (PIN_BASE + 0x00 + 4)
-#define AT91_PIN_PA5    (PIN_BASE + 0x00 + 5)
-#define AT91_PIN_PA6    (PIN_BASE + 0x00 + 6)
-#define AT91_PIN_PA7    (PIN_BASE + 0x00 + 7)
-#define AT91_PIN_PA8    (PIN_BASE + 0x00 + 8)
-#define AT91_PIN_PA9    (PIN_BASE + 0x00 + 9)
-#define AT91_PIN_PA10   (PIN_BASE + 0x00 + 10)
-#define AT91_PIN_PA11   (PIN_BASE + 0x00 + 11)
-#define AT91_PIN_PA12   (PIN_BASE + 0x00 + 12)
-#define AT91_PIN_PA13   (PIN_BASE + 0x00 + 13)
-#define AT91_PIN_PA14   (PIN_BASE + 0x00 + 14)
-#define AT91_PIN_PA15   (PIN_BASE + 0x00 + 15)
-#define AT91_PIN_PA16   (PIN_BASE + 0x00 + 16)
-#define AT91_PIN_PA17   (PIN_BASE + 0x00 + 17)
-#define AT91_PIN_PA18   (PIN_BASE + 0x00 + 18)
-#define AT91_PIN_PA19   (PIN_BASE + 0x00 + 19)
-#define AT91_PIN_PA20   (PIN_BASE + 0x00 + 20)
-#define AT91_PIN_PA21   (PIN_BASE + 0x00 + 21)
-#define AT91_PIN_PA22   (PIN_BASE + 0x00 + 22)
-#define AT91_PIN_PA23   (PIN_BASE + 0x00 + 23)
-#define AT91_PIN_PA24   (PIN_BASE + 0x00 + 24)
-#define AT91_PIN_PA25   (PIN_BASE + 0x00 + 25)
-#define AT91_PIN_PA26   (PIN_BASE + 0x00 + 26)
-#define AT91_PIN_PA27   (PIN_BASE + 0x00 + 27)
-#define AT91_PIN_PA28   (PIN_BASE + 0x00 + 28)
-#define AT91_PIN_PA29   (PIN_BASE + 0x00 + 29)
-#define AT91_PIN_PA30   (PIN_BASE + 0x00 + 30)
-#define AT91_PIN_PA31   (PIN_BASE + 0x00 + 31)
-
-#define AT91_PIN_PB0    (PIN_BASE + 0x20 + 0)
-#define AT91_PIN_PB1    (PIN_BASE + 0x20 + 1)
-#define AT91_PIN_PB2    (PIN_BASE + 0x20 + 2)
-#define AT91_PIN_PB3    (PIN_BASE + 0x20 + 3)
-#define AT91_PIN_PB4    (PIN_BASE + 0x20 + 4)
-#define AT91_PIN_PB5    (PIN_BASE + 0x20 + 5)
-#define AT91_PIN_PB6    (PIN_BASE + 0x20 + 6)
-#define AT91_PIN_PB7    (PIN_BASE + 0x20 + 7)
-#define AT91_PIN_PB8    (PIN_BASE + 0x20 + 8)
-#define AT91_PIN_PB9    (PIN_BASE + 0x20 + 9)
-#define AT91_PIN_PB10   (PIN_BASE + 0x20 + 10)
-#define AT91_PIN_PB11   (PIN_BASE + 0x20 + 11)
-#define AT91_PIN_PB12   (PIN_BASE + 0x20 + 12)
-#define AT91_PIN_PB13   (PIN_BASE + 0x20 + 13)
-#define AT91_PIN_PB14   (PIN_BASE + 0x20 + 14)
-#define AT91_PIN_PB15   (PIN_BASE + 0x20 + 15)
-#define AT91_PIN_PB16   (PIN_BASE + 0x20 + 16)
-#define AT91_PIN_PB17   (PIN_BASE + 0x20 + 17)
-#define AT91_PIN_PB18   (PIN_BASE + 0x20 + 18)
-#define AT91_PIN_PB19   (PIN_BASE + 0x20 + 19)
-#define AT91_PIN_PB20   (PIN_BASE + 0x20 + 20)
-#define AT91_PIN_PB21   (PIN_BASE + 0x20 + 21)
-#define AT91_PIN_PB22   (PIN_BASE + 0x20 + 22)
-#define AT91_PIN_PB23   (PIN_BASE + 0x20 + 23)
-#define AT91_PIN_PB24   (PIN_BASE + 0x20 + 24)
-#define AT91_PIN_PB25   (PIN_BASE + 0x20 + 25)
-#define AT91_PIN_PB26   (PIN_BASE + 0x20 + 26)
-#define AT91_PIN_PB27   (PIN_BASE + 0x20 + 27)
-#define AT91_PIN_PB28   (PIN_BASE + 0x20 + 28)
-#define AT91_PIN_PB29   (PIN_BASE + 0x20 + 29)
-#define AT91_PIN_PB30   (PIN_BASE + 0x20 + 30)
-#define AT91_PIN_PB31   (PIN_BASE + 0x20 + 31)
-
-#define AT91_PIN_PC0    (PIN_BASE + 0x40 + 0)
-#define AT91_PIN_PC1    (PIN_BASE + 0x40 + 1)
-#define AT91_PIN_PC2    (PIN_BASE + 0x40 + 2)
-#define AT91_PIN_PC3    (PIN_BASE + 0x40 + 3)
-#define AT91_PIN_PC4    (PIN_BASE + 0x40 + 4)
-#define AT91_PIN_PC5    (PIN_BASE + 0x40 + 5)
-#define AT91_PIN_PC6    (PIN_BASE + 0x40 + 6)
-#define AT91_PIN_PC7    (PIN_BASE + 0x40 + 7)
-#define AT91_PIN_PC8    (PIN_BASE + 0x40 + 8)
-#define AT91_PIN_PC9    (PIN_BASE + 0x40 + 9)
-#define AT91_PIN_PC10   (PIN_BASE + 0x40 + 10)
-#define AT91_PIN_PC11   (PIN_BASE + 0x40 + 11)
-#define AT91_PIN_PC12   (PIN_BASE + 0x40 + 12)
-#define AT91_PIN_PC13   (PIN_BASE + 0x40 + 13)
-#define AT91_PIN_PC14   (PIN_BASE + 0x40 + 14)
-#define AT91_PIN_PC15   (PIN_BASE + 0x40 + 15)
-#define AT91_PIN_PC16   (PIN_BASE + 0x40 + 16)
-#define AT91_PIN_PC17   (PIN_BASE + 0x40 + 17)
-#define AT91_PIN_PC18   (PIN_BASE + 0x40 + 18)
-#define AT91_PIN_PC19   (PIN_BASE + 0x40 + 19)
-#define AT91_PIN_PC20   (PIN_BASE + 0x40 + 20)
-#define AT91_PIN_PC21   (PIN_BASE + 0x40 + 21)
-#define AT91_PIN_PC22   (PIN_BASE + 0x40 + 22)
-#define AT91_PIN_PC23   (PIN_BASE + 0x40 + 23)
-#define AT91_PIN_PC24   (PIN_BASE + 0x40 + 24)
-#define AT91_PIN_PC25   (PIN_BASE + 0x40 + 25)
-#define AT91_PIN_PC26   (PIN_BASE + 0x40 + 26)
-#define AT91_PIN_PC27   (PIN_BASE + 0x40 + 27)
-#define AT91_PIN_PC28   (PIN_BASE + 0x40 + 28)
-#define AT91_PIN_PC29   (PIN_BASE + 0x40 + 29)
-#define AT91_PIN_PC30   (PIN_BASE + 0x40 + 30)
-#define AT91_PIN_PC31   (PIN_BASE + 0x40 + 31)
-
-#define AT91_PIN_PD0    (PIN_BASE + 0x60 + 0)
-#define AT91_PIN_PD1    (PIN_BASE + 0x60 + 1)
-#define AT91_PIN_PD2    (PIN_BASE + 0x60 + 2)
-#define AT91_PIN_PD3    (PIN_BASE + 0x60 + 3)
-#define AT91_PIN_PD4    (PIN_BASE + 0x60 + 4)
-#define AT91_PIN_PD5    (PIN_BASE + 0x60 + 5)
-#define AT91_PIN_PD6    (PIN_BASE + 0x60 + 6)
-#define AT91_PIN_PD7    (PIN_BASE + 0x60 + 7)
-#define AT91_PIN_PD8    (PIN_BASE + 0x60 + 8)
-#define AT91_PIN_PD9    (PIN_BASE + 0x60 + 9)
-#define AT91_PIN_PD10   (PIN_BASE + 0x60 + 10)
-#define AT91_PIN_PD11   (PIN_BASE + 0x60 + 11)
-#define AT91_PIN_PD12   (PIN_BASE + 0x60 + 12)
-#define AT91_PIN_PD13   (PIN_BASE + 0x60 + 13)
-#define AT91_PIN_PD14   (PIN_BASE + 0x60 + 14)
-#define AT91_PIN_PD15   (PIN_BASE + 0x60 + 15)
-#define AT91_PIN_PD16   (PIN_BASE + 0x60 + 16)
-#define AT91_PIN_PD17   (PIN_BASE + 0x60 + 17)
-#define AT91_PIN_PD18   (PIN_BASE + 0x60 + 18)
-#define AT91_PIN_PD19   (PIN_BASE + 0x60 + 19)
-#define AT91_PIN_PD20   (PIN_BASE + 0x60 + 20)
-#define AT91_PIN_PD21   (PIN_BASE + 0x60 + 21)
-#define AT91_PIN_PD22   (PIN_BASE + 0x60 + 22)
-#define AT91_PIN_PD23   (PIN_BASE + 0x60 + 23)
-#define AT91_PIN_PD24   (PIN_BASE + 0x60 + 24)
-#define AT91_PIN_PD25   (PIN_BASE + 0x60 + 25)
-#define AT91_PIN_PD26   (PIN_BASE + 0x60 + 26)
-#define AT91_PIN_PD27   (PIN_BASE + 0x60 + 27)
-#define AT91_PIN_PD28   (PIN_BASE + 0x60 + 28)
-#define AT91_PIN_PD29   (PIN_BASE + 0x60 + 29)
-#define AT91_PIN_PD30   (PIN_BASE + 0x60 + 30)
-#define AT91_PIN_PD31   (PIN_BASE + 0x60 + 31)
-
-#define AT91_PIN_PE0    (PIN_BASE + 0x80 + 0)
-#define AT91_PIN_PE1    (PIN_BASE + 0x80 + 1)
-#define AT91_PIN_PE2    (PIN_BASE + 0x80 + 2)
-#define AT91_PIN_PE3    (PIN_BASE + 0x80 + 3)
-#define AT91_PIN_PE4    (PIN_BASE + 0x80 + 4)
-#define AT91_PIN_PE5    (PIN_BASE + 0x80 + 5)
-#define AT91_PIN_PE6    (PIN_BASE + 0x80 + 6)
-#define AT91_PIN_PE7    (PIN_BASE + 0x80 + 7)
-#define AT91_PIN_PE8    (PIN_BASE + 0x80 + 8)
-#define AT91_PIN_PE9    (PIN_BASE + 0x80 + 9)
-#define AT91_PIN_PE10   (PIN_BASE + 0x80 + 10)
-#define AT91_PIN_PE11   (PIN_BASE + 0x80 + 11)
-#define AT91_PIN_PE12   (PIN_BASE + 0x80 + 12)
-#define AT91_PIN_PE13   (PIN_BASE + 0x80 + 13)
-#define AT91_PIN_PE14   (PIN_BASE + 0x80 + 14)
-#define AT91_PIN_PE15   (PIN_BASE + 0x80 + 15)
-#define AT91_PIN_PE16   (PIN_BASE + 0x80 + 16)
-#define AT91_PIN_PE17   (PIN_BASE + 0x80 + 17)
-#define AT91_PIN_PE18   (PIN_BASE + 0x80 + 18)
-#define AT91_PIN_PE19   (PIN_BASE + 0x80 + 19)
-#define AT91_PIN_PE20   (PIN_BASE + 0x80 + 20)
-#define AT91_PIN_PE21   (PIN_BASE + 0x80 + 21)
-#define AT91_PIN_PE22   (PIN_BASE + 0x80 + 22)
-#define AT91_PIN_PE23   (PIN_BASE + 0x80 + 23)
-#define AT91_PIN_PE24   (PIN_BASE + 0x80 + 24)
-#define AT91_PIN_PE25   (PIN_BASE + 0x80 + 25)
-#define AT91_PIN_PE26   (PIN_BASE + 0x80 + 26)
-#define AT91_PIN_PE27   (PIN_BASE + 0x80 + 27)
-#define AT91_PIN_PE28   (PIN_BASE + 0x80 + 28)
-#define AT91_PIN_PE29   (PIN_BASE + 0x80 + 29)
-#define AT91_PIN_PE30   (PIN_BASE + 0x80 + 30)
-#define AT91_PIN_PE31   (PIN_BASE + 0x80 + 31)
+#define AT91_PIN_PA0    (0x00 + 0)
+#define AT91_PIN_PA1    (0x00 + 1)
+#define AT91_PIN_PA2    (0x00 + 2)
+#define AT91_PIN_PA3    (0x00 + 3)
+#define AT91_PIN_PA4    (0x00 + 4)
+#define AT91_PIN_PA5    (0x00 + 5)
+#define AT91_PIN_PA6    (0x00 + 6)
+#define AT91_PIN_PA7    (0x00 + 7)
+#define AT91_PIN_PA8    (0x00 + 8)
+#define AT91_PIN_PA9    (0x00 + 9)
+#define AT91_PIN_PA10   (0x00 + 10)
+#define AT91_PIN_PA11   (0x00 + 11)
+#define AT91_PIN_PA12   (0x00 + 12)
+#define AT91_PIN_PA13   (0x00 + 13)
+#define AT91_PIN_PA14   (0x00 + 14)
+#define AT91_PIN_PA15   (0x00 + 15)
+#define AT91_PIN_PA16   (0x00 + 16)
+#define AT91_PIN_PA17   (0x00 + 17)
+#define AT91_PIN_PA18   (0x00 + 18)
+#define AT91_PIN_PA19   (0x00 + 19)
+#define AT91_PIN_PA20   (0x00 + 20)
+#define AT91_PIN_PA21   (0x00 + 21)
+#define AT91_PIN_PA22   (0x00 + 22)
+#define AT91_PIN_PA23   (0x00 + 23)
+#define AT91_PIN_PA24   (0x00 + 24)
+#define AT91_PIN_PA25   (0x00 + 25)
+#define AT91_PIN_PA26   (0x00 + 26)
+#define AT91_PIN_PA27   (0x00 + 27)
+#define AT91_PIN_PA28   (0x00 + 28)
+#define AT91_PIN_PA29   (0x00 + 29)
+#define AT91_PIN_PA30   (0x00 + 30)
+#define AT91_PIN_PA31   (0x00 + 31)
+
+#define AT91_PIN_PB0    (0x20 + 0)
+#define AT91_PIN_PB1    (0x20 + 1)
+#define AT91_PIN_PB2    (0x20 + 2)
+#define AT91_PIN_PB3    (0x20 + 3)
+#define AT91_PIN_PB4    (0x20 + 4)
+#define AT91_PIN_PB5    (0x20 + 5)
+#define AT91_PIN_PB6    (0x20 + 6)
+#define AT91_PIN_PB7    (0x20 + 7)
+#define AT91_PIN_PB8    (0x20 + 8)
+#define AT91_PIN_PB9    (0x20 + 9)
+#define AT91_PIN_PB10   (0x20 + 10)
+#define AT91_PIN_PB11   (0x20 + 11)
+#define AT91_PIN_PB12   (0x20 + 12)
+#define AT91_PIN_PB13   (0x20 + 13)
+#define AT91_PIN_PB14   (0x20 + 14)
+#define AT91_PIN_PB15   (0x20 + 15)
+#define AT91_PIN_PB16   (0x20 + 16)
+#define AT91_PIN_PB17   (0x20 + 17)
+#define AT91_PIN_PB18   (0x20 + 18)
+#define AT91_PIN_PB19   (0x20 + 19)
+#define AT91_PIN_PB20   (0x20 + 20)
+#define AT91_PIN_PB21   (0x20 + 21)
+#define AT91_PIN_PB22   (0x20 + 22)
+#define AT91_PIN_PB23   (0x20 + 23)
+#define AT91_PIN_PB24   (0x20 + 24)
+#define AT91_PIN_PB25   (0x20 + 25)
+#define AT91_PIN_PB26   (0x20 + 26)
+#define AT91_PIN_PB27   (0x20 + 27)
+#define AT91_PIN_PB28   (0x20 + 28)
+#define AT91_PIN_PB29   (0x20 + 29)
+#define AT91_PIN_PB30   (0x20 + 30)
+#define AT91_PIN_PB31   (0x20 + 31)
+
+#define AT91_PIN_PC0    (0x40 + 0)
+#define AT91_PIN_PC1    (0x40 + 1)
+#define AT91_PIN_PC2    (0x40 + 2)
+#define AT91_PIN_PC3    (0x40 + 3)
+#define AT91_PIN_PC4    (0x40 + 4)
+#define AT91_PIN_PC5    (0x40 + 5)
+#define AT91_PIN_PC6    (0x40 + 6)
+#define AT91_PIN_PC7    (0x40 + 7)
+#define AT91_PIN_PC8    (0x40 + 8)
+#define AT91_PIN_PC9    (0x40 + 9)
+#define AT91_PIN_PC10   (0x40 + 10)
+#define AT91_PIN_PC11   (0x40 + 11)
+#define AT91_PIN_PC12   (0x40 + 12)
+#define AT91_PIN_PC13   (0x40 + 13)
+#define AT91_PIN_PC14   (0x40 + 14)
+#define AT91_PIN_PC15   (0x40 + 15)
+#define AT91_PIN_PC16   (0x40 + 16)
+#define AT91_PIN_PC17   (0x40 + 17)
+#define AT91_PIN_PC18   (0x40 + 18)
+#define AT91_PIN_PC19   (0x40 + 19)
+#define AT91_PIN_PC20   (0x40 + 20)
+#define AT91_PIN_PC21   (0x40 + 21)
+#define AT91_PIN_PC22   (0x40 + 22)
+#define AT91_PIN_PC23   (0x40 + 23)
+#define AT91_PIN_PC24   (0x40 + 24)
+#define AT91_PIN_PC25   (0x40 + 25)
+#define AT91_PIN_PC26   (0x40 + 26)
+#define AT91_PIN_PC27   (0x40 + 27)
+#define AT91_PIN_PC28   (0x40 + 28)
+#define AT91_PIN_PC29   (0x40 + 29)
+#define AT91_PIN_PC30   (0x40 + 30)
+#define AT91_PIN_PC31   (0x40 + 31)
+
+#define AT91_PIN_PD0    (0x60 + 0)
+#define AT91_PIN_PD1    (0x60 + 1)
+#define AT91_PIN_PD2    (0x60 + 2)
+#define AT91_PIN_PD3    (0x60 + 3)
+#define AT91_PIN_PD4    (0x60 + 4)
+#define AT91_PIN_PD5    (0x60 + 5)
+#define AT91_PIN_PD6    (0x60 + 6)
+#define AT91_PIN_PD7    (0x60 + 7)
+#define AT91_PIN_PD8    (0x60 + 8)
+#define AT91_PIN_PD9    (0x60 + 9)
+#define AT91_PIN_PD10   (0x60 + 10)
+#define AT91_PIN_PD11   (0x60 + 11)
+#define AT91_PIN_PD12   (0x60 + 12)
+#define AT91_PIN_PD13   (0x60 + 13)
+#define AT91_PIN_PD14   (0x60 + 14)
+#define AT91_PIN_PD15   (0x60 + 15)
+#define AT91_PIN_PD16   (0x60 + 16)
+#define AT91_PIN_PD17   (0x60 + 17)
+#define AT91_PIN_PD18   (0x60 + 18)
+#define AT91_PIN_PD19   (0x60 + 19)
+#define AT91_PIN_PD20   (0x60 + 20)
+#define AT91_PIN_PD21   (0x60 + 21)
+#define AT91_PIN_PD22   (0x60 + 22)
+#define AT91_PIN_PD23   (0x60 + 23)
+#define AT91_PIN_PD24   (0x60 + 24)
+#define AT91_PIN_PD25   (0x60 + 25)
+#define AT91_PIN_PD26   (0x60 + 26)
+#define AT91_PIN_PD27   (0x60 + 27)
+#define AT91_PIN_PD28   (0x60 + 28)
+#define AT91_PIN_PD29   (0x60 + 29)
+#define AT91_PIN_PD30   (0x60 + 30)
+#define AT91_PIN_PD31   (0x60 + 31)
+
+#define AT91_PIN_PE0    (0x80 + 0)
+#define AT91_PIN_PE1    (0x80 + 1)
+#define AT91_PIN_PE2    (0x80 + 2)
+#define AT91_PIN_PE3    (0x80 + 3)
+#define AT91_PIN_PE4    (0x80 + 4)
+#define AT91_PIN_PE5    (0x80 + 5)
+#define AT91_PIN_PE6    (0x80 + 6)
+#define AT91_PIN_PE7    (0x80 + 7)
+#define AT91_PIN_PE8    (0x80 + 8)
+#define AT91_PIN_PE9    (0x80 + 9)
+#define AT91_PIN_PE10   (0x80 + 10)
+#define AT91_PIN_PE11   (0x80 + 11)
+#define AT91_PIN_PE12   (0x80 + 12)
+#define AT91_PIN_PE13   (0x80 + 13)
+#define AT91_PIN_PE14   (0x80 + 14)
+#define AT91_PIN_PE15   (0x80 + 15)
+#define AT91_PIN_PE16   (0x80 + 16)
+#define AT91_PIN_PE17   (0x80 + 17)
+#define AT91_PIN_PE18   (0x80 + 18)
+#define AT91_PIN_PE19   (0x80 + 19)
+#define AT91_PIN_PE20   (0x80 + 20)
+#define AT91_PIN_PE21   (0x80 + 21)
+#define AT91_PIN_PE22   (0x80 + 22)
+#define AT91_PIN_PE23   (0x80 + 23)
+#define AT91_PIN_PE24   (0x80 + 24)
+#define AT91_PIN_PE25   (0x80 + 25)
+#define AT91_PIN_PE26   (0x80 + 26)
+#define AT91_PIN_PE27   (0x80 + 27)
+#define AT91_PIN_PE28   (0x80 + 28)
+#define AT91_PIN_PE29   (0x80 + 29)
+#define AT91_PIN_PE30   (0x80 + 30)
+#define AT91_PIN_PE31   (0x80 + 31)
 
 #ifndef __ASSEMBLY__
 /* setup setup routines, called from board init or driver probe() */
@@ -215,8 +213,8 @@ extern void at91_gpio_resume(void);
 
 #include <asm/errno.h>
 
-#define gpio_to_irq(gpio) (gpio)
-#define irq_to_gpio(irq)  (irq)
+#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS)
+#define irq_to_gpio(irq)  (irq - NR_AIC_IRQS)
 
 #endif  /* __ASSEMBLY__ */
 
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 483478d8be6b..2d0e4e998566 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -16,6 +16,12 @@
 
 #include <asm/sizes.h>
 
+/* DBGU base */
+/* rm9200, 9260/9g20, 9261/9g10, 9rl */
+#define AT91_BASE_DBGU0 0xfffff200
+/* 9263, 9g45, cap9 */
+#define AT91_BASE_DBGU1 0xffffee00
+
 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
@@ -52,6 +58,12 @@
 #endif
 
 /*
+ * On all at91 have the Advanced Interrupt Controller starts at address
+ * 0xfffff000
+ */
+#define AT91_AIC        0xfffff000
+
+/*
  * Peripheral identifiers/interrupts.
  */
 #define AT91_ID_FIQ             0       /* Advanced Interrupt Controller (FIQ) */
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
index 36bd55f3fc6e..ac8b7dfc85ef 100644
--- a/arch/arm/mach-at91/include/mach/irqs.h
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -31,7 +31,7 @@
  * Acknowledge interrupt with AIC after interrupt has been handled.
  *   (by kernel/irq.c)
  */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
 
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index 8f4866045b41..ec164a4124c9 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -19,7 +19,7 @@
 #define BOARD_HAVE_NAND_16BIT   (1 << 31)
 static inline int board_have_nand_16bit(void)
 {
-        return system_rev & BOARD_HAVE_NAND_16BIT;
+        return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 85820ad801cc..5e917a66edd7 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -23,70 +23,15 @@
 
 #include <mach/hardware.h>
 
-#if defined(CONFIG_ARCH_AT91RM9200)
+#ifdef CONFIG_ARCH_AT91X40
 
-#define CLOCK_TICK_RATE         (AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-
-#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
-#define AT91SAM9_MASTER_CLOCK   90000000
-#else
-#define AT91SAM9_MASTER_CLOCK   99300000
-#endif
-
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK   99300000
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G10)
-
-#define AT91SAM9_MASTER_CLOCK   133000000
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9263)
-
-#if defined(CONFIG_MACH_USB_A9263)
-#define AT91SAM9_MASTER_CLOCK   90000000
-#else
-#define AT91SAM9_MASTER_CLOCK   99959500
-#endif
-
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
-
-#define AT91SAM9_MASTER_CLOCK   100000000
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#define AT91X40_MASTER_CLOCK    40000000
+#define CLOCK_TICK_RATE         (AT91X40_MASTER_CLOCK)
 
-#if defined(CONFIG_MACH_USB_A9G20)
-#define AT91SAM9_MASTER_CLOCK   133000000
 #else
-#define AT91SAM9_MASTER_CLOCK   132096000
-#endif
-
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
 
-#define AT91SAM9_MASTER_CLOCK   133333333
-#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-
-#define AT91CAP9_MASTER_CLOCK   100000000
-#define CLOCK_TICK_RATE         (AT91CAP9_MASTER_CLOCK/16)
-
-#elif defined(CONFIG_ARCH_AT91X40)
-
-#define AT91X40_MASTER_CLOCK    40000000
-#define CLOCK_TICK_RATE         (AT91X40_MASTER_CLOCK)
+#define CLOCK_TICK_RATE         12345678
 
 #endif
 
-#endif
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 18bdcdeb474f..0234fd9d20d6 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -24,8 +24,10 @@
 #include <linux/io.h>
 #include <linux/atmel_serial.h>
 
-#if defined(CONFIG_AT91_EARLY_DBGU)
-#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#if defined(CONFIG_AT91_EARLY_DBGU0)
+#define UART_OFFSET AT91_BASE_DBGU0
+#elif defined(CONFIG_AT91_EARLY_DBGU1)
+#define UART_OFFSET AT91_BASE_DBGU1
 #elif defined(CONFIG_AT91_EARLY_USART0)
 #define UART_OFFSET AT91_USART0
 #elif defined(CONFIG_AT91_EARLY_USART1)
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 9665265ec757..be6b639ecd7b 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -33,17 +33,18 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
+void __iomem *at91_aic_base;
 
 static void at91_aic_mask_irq(struct irq_data *d)
 {
         /* Disable interrupt on AIC */
-        at91_sys_write(AT91_AIC_IDCR, 1 << d->irq);
+        at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
 }
 
 static void at91_aic_unmask_irq(struct irq_data *d)
 {
         /* Enable interrupt on AIC */
-        at91_sys_write(AT91_AIC_IECR, 1 << d->irq);
+        at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
 }
 
 unsigned int at91_extern_irq;
@@ -77,8 +78,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
                 return -EINVAL;
         }
 
-        smr = at91_sys_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
-        at91_sys_write(AT91_AIC_SMR(d->irq), smr | srctype);
+        smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
+        at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
         return 0;
 }
 
@@ -102,15 +103,15 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 
 void at91_irq_suspend(void)
 {
-        backups = at91_sys_read(AT91_AIC_IMR);
-        at91_sys_write(AT91_AIC_IDCR, backups);
-        at91_sys_write(AT91_AIC_IECR, wakeups);
+        backups = at91_aic_read(AT91_AIC_IMR);
+        at91_aic_write(AT91_AIC_IDCR, backups);
+        at91_aic_write(AT91_AIC_IECR, wakeups);
 }
 
 void at91_irq_resume(void)
 {
-        at91_sys_write(AT91_AIC_IDCR, wakeups);
-        at91_sys_write(AT91_AIC_IECR, backups);
+        at91_aic_write(AT91_AIC_IDCR, wakeups);
+        at91_aic_write(AT91_AIC_IECR, backups);
 }
 
 #else
@@ -133,34 +134,39 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
 {
         unsigned int i;
 
+        at91_aic_base = ioremap(AT91_AIC, 512);
+
+        if (!at91_aic_base)
+                panic("Impossible to ioremap AT91_AIC\n");
+
         /*
          * The IVR is used by macro get_irqnr_and_base to read and verify.
          * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
          */
         for (i = 0; i < NR_AIC_IRQS; i++) {
                 /* Put irq number in Source Vector Register: */
-                at91_sys_write(AT91_AIC_SVR(i), i);
+                at91_aic_write(AT91_AIC_SVR(i), i);
                 /* Active Low interrupt, with the specified priority */
-                at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+                at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
 
                 irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
                 set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 
                 /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
                 if (i < 8)
-                        at91_sys_write(AT91_AIC_EOICR, 0);
+                        at91_aic_write(AT91_AIC_EOICR, 0);
         }
 
         /*
          * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
          * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
          */
-        at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+        at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS);
 
         /* No debugging in AIC: Debug (Protect) Control Register */
-        at91_sys_write(AT91_AIC_DCR, 0);
+        at91_aic_write(AT91_AIC_DCR, 0);
 
         /* Disable and clear all interrupts initially */
-        at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
-        at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+        at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+        at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
 }
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 7046158109d7..62ad95556c36 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -34,7 +34,7 @@
 /*
  * Show the reason for the previous system reset.
  */
-#if defined(AT91_SHDWC)
+#if defined(AT91_RSTC)
 
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
@@ -58,8 +58,11 @@ static void __init show_reset_status(void)
         char *reason, *r2 = reset;
         u32 reset_type, wake_type;
 
+        if (!at91_shdwc_base)
+                return;
+
         reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
-        wake_type = at91_sys_read(AT91_SHDW_SR);
+        wake_type = at91_shdwc_read(AT91_SHDW_SR);
 
         switch (reset_type) {
         case AT91_RSTC_RSTTYP_GENERAL:
@@ -215,7 +218,7 @@ static int at91_pm_enter(suspend_state_t state)
                                         | (1 << AT91_ID_FIQ)
                                         | (1 << AT91_ID_SYS)
                                         | (at91_extern_irq))
-                                & at91_sys_read(AT91_AIC_IMR),
+                                & at91_aic_read(AT91_AIC_IMR),
                         state);
 
         switch (state) {
@@ -283,7 +286,7 @@ static int at91_pm_enter(suspend_state_t state)
         }
 
         pr_debug("AT91: PM - wakeup %08x\n",
-                        at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+                        at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR));
 
 error:
         target_state = PM_SUSPEND_ON;
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 5eab6aa621d0..8294783b679d 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -10,38 +10,58 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <mach/at91sam9_smc.h>
 
 #include "sam9_smc.h"
 
-void __init sam9_smc_configure(int cs, struct sam9_smc_config* config)
+
+#define AT91_SMC_CS(id, n)      (smc_base_addr[id] + ((n) * 0x10))
+
+static void __iomem *smc_base_addr[2];
+
+static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
 {
+
         /* Setup register */
-        at91_sys_write(AT91_SMC_SETUP(cs),
-                  AT91_SMC_NWESETUP_(config->nwe_setup)
-                | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-                | AT91_SMC_NRDSETUP_(config->nrd_setup)
-                | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup)
-        );
+        __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
+                   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
+                   | AT91_SMC_NRDSETUP_(config->nrd_setup)
+                   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
+                   base + AT91_SMC_SETUP);
 
         /* Pulse register */
-        at91_sys_write(AT91_SMC_PULSE(cs),
-                  AT91_SMC_NWEPULSE_(config->nwe_pulse)
-                | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-                | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-                | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse)
-        );
+        __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
+                   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
+                   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
+                   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
+                   base + AT91_SMC_PULSE);
 
         /* Cycle register */
-        at91_sys_write(AT91_SMC_CYCLE(cs),
-                  AT91_SMC_NWECYCLE_(config->write_cycle)
-                | AT91_SMC_NRDCYCLE_(config->read_cycle)
-        );
+        __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
+                   | AT91_SMC_NRDCYCLE_(config->read_cycle),
+                   base + AT91_SMC_CYCLE);
 
         /* Mode register */
-        at91_sys_write(AT91_SMC_MODE(cs),
-                  config->mode
-                | AT91_SMC_TDF_(config->tdf_cycles)
-        );
+        __raw_writel(config->mode
+                   | AT91_SMC_TDF_(config->tdf_cycles),
+                   base + AT91_SMC_MODE);
+}
+
+void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+{
+        sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
+}
+
+void __init at91sam9_ioremap_smc(int id, u32 addr)
+{
+        if (id > 1) {
+                pr_warn("%s: id > 2\n", __func__);
+                return;
+        }
+        smc_base_addr[id] = ioremap(addr, 512);
+        if (!smc_base_addr[id])
+                pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
 }
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index bf72cfb3455b..039c5ce17aec 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -30,4 +30,5 @@ struct sam9_smc_config {
         u8 tdf_cycles:4;
 };
 
-extern void __init sam9_smc_configure(int cs, struct sam9_smc_config* config);
+extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
+extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index cf98a8f94dc5..8bdcc3cb6012 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/pm.h>
 
 #include <asm/mach/map.h>
 
@@ -15,6 +16,7 @@
 #include <mach/cpu.h>
 #include <mach/at91_dbgu.h>
 #include <mach/at91_pmc.h>
+#include <mach/at91_shdwc.h>
 
 #include "soc.h"
 #include "generic.h"
@@ -73,9 +75,6 @@ static struct map_desc at91_io_desc __initdata = {
         .type           = MT_DEVICE,
 };
 
-#define AT91_DBGU0      0xfffff200
-#define AT91_DBGU1      0xffffee00
-
 static void __init soc_detect(u32 dbgu_base)
 {
         u32 cidr, socid;
@@ -248,9 +247,9 @@ void __init at91_map_io(void)
         at91_soc_initdata.type = AT91_SOC_NONE;
         at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
 
-        soc_detect(AT91_DBGU0);
+        soc_detect(AT91_BASE_DBGU0);
         if (!at91_soc_is_detected())
-                soc_detect(AT91_DBGU1);
+                soc_detect(AT91_BASE_DBGU1);
 
         if (!at91_soc_is_detected())
                 panic("AT91: Impossible to detect the SOC type");
@@ -267,8 +266,25 @@ void __init at91_map_io(void)
                 at91_boot_soc.map_io();
 }
 
+void __iomem *at91_shdwc_base = NULL;
+
+static void at91sam9_poweroff(void)
+{
+        at91_shdwc_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+void __init at91_ioremap_shdwc(u32 base_addr)
+{
+        at91_shdwc_base = ioremap(base_addr, 16);
+        if (!at91_shdwc_base)
+                panic("Impossible to ioremap at91_shdwc_base\n");
+        pm_power_off = at91sam9_poweroff;
+}
+
 void __init at91_initialize(unsigned long main_clock)
 {
+        at91_boot_soc.ioremap_registers();
+
         /* Init clock subsystem */
         at91_clock_init(main_clock);
 
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 21ed8816e6f7..4588ae6f7acd 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -7,6 +7,7 @@
 struct at91_init_soc {
         unsigned int *default_irq_priority;
         void (*map_io)(void);
+        void (*ioremap_registers)(void);
         void (*register_clocks)(void);
         void (*init)(void);
 };