1 files changed, 5 insertions, 8 deletions

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 14acc901e24c..f897f84d43dc 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -48,12 +48,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
         /* Initialize processor: 18.432 MHz crystal */
         at91sam9261_initialize(18432000);
@@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC15,
         .enable_pin     = AT91_PIN_PC14,
         .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-        .bus_width_16   = 1,
-#else
-        .bus_width_16   = 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+        ek_nand_data.bus_width_16 = !board_have_nand_8bit();
         /* setup bus-width (8 or 16) */
         if (ek_nand_data.bus_width_16)
                 ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
         /* Maintainer: Atmel */
-        .boot_params    = AT91_SDRAM_BASE + 0x100,
         .timer          = &at91sam926x_timer,
-        .map_io         = ek_map_io,
+        .map_io         = at91sam9261_map_io,
+        .init_early     = ek_init_early,
         .init_irq       = ek_init_irq,
         .init_machine   = ek_board_init,
 MACHINE_END