1 files changed, 0 insertions, 159 deletions

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
deleted file mode 100644
index d58d36225e08..000000000000
--- a/arch/arm/mach-at91/board-kb9202.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-kb9202.c
- *
- *  Copyright (c) 2005 kb_admin
- *                     KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kb9202_init_early(void)
-{
-        /* Set cpu type: PQFP */
-        at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
-        /* Initialize processor: 10 MHz crystal */
-        at91_initialize(10000000);
-}
-
-static struct macb_platform_data __initdata kb9202_eth_data = {
-        .phy_irq_pin    = AT91_PIN_PB29,
-        .is_rmii        = 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
-        .ports          = 1,
-        .vbus_pin       = {-EINVAL, -EINVAL},
-        .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
-        .vbus_pin       = AT91_PIN_PB24,
-        .pullup_pin     = AT91_PIN_PB22,
-};
-
-static struct mci_platform_data __initdata kb9202_mci0_data = {
-        .slot[0] = {
-                .bus_width      = 4,
-                .detect_pin     = AT91_PIN_PB2,
-                .wp_pin         = -EINVAL,
-        },
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
-        {
-                .name   = "nand_fs",
-                .offset = 0,
-                .size   = MTDPART_SIZ_FULL,
-        },
-};
-
-static struct atmel_nand_data __initdata kb9202_nand_data = {
-        .ale            = 22,
-        .cle            = 21,
-        .det_pin        = -EINVAL,
-        .rdy_pin        = AT91_PIN_PC29,
-        .enable_pin     = AT91_PIN_PC28,
-        .ecc_mode       = NAND_ECC_SOFT,
-        .parts          = kb9202_nand_partition,
-        .num_parts      = ARRAY_SIZE(kb9202_nand_partition),
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kb9202_leds[] = {
-        {       /* D1 */
-                .name                   = "led1",
-                .gpio                   = AT91_PIN_PC19,
-                .active_low             = 1,
-                .default_trigger        = "heartbeat",
-        },
-        {       /* D2 */
-                .name                   = "led2",
-                .gpio                   = AT91_PIN_PC18,
-                .active_low             = 1,
-                .default_trigger        = "timer",
-        }
-};
-
-static void __init kb9202_board_init(void)
-{
-        /* Serial */
-        /* DBGU on ttyS0. (Rx & Tx only) */
-        at91_register_uart(0, 0, 0);
-
-        /* USART0 on ttyS1 (Rx & Tx only) */
-        at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
-        /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
-        at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
-        /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
-        at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-        at91_add_device_serial();
-        /* Ethernet */
-        at91_add_device_eth(&kb9202_eth_data);
-        /* USB Host */
-        at91_add_device_usbh(&kb9202_usbh_data);
-        /* USB Device */
-        at91_add_device_udc(&kb9202_udc_data);
-        /* MMC */
-        at91_add_device_mci(0, &kb9202_mci0_data);
-        /* I2C */
-        at91_add_device_i2c(NULL, 0);
-        /* SPI */
-        at91_add_device_spi(NULL, 0);
-        /* NAND */
-        at91_add_device_nand(&kb9202_nand_data);
-        /* LEDs */
-        at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
-}
-
-MACHINE_START(KB9200, "KB920x")
-        /* Maintainer: KwikByte, Inc. */
-        .init_time      = at91rm9200_timer_init,
-        .map_io         = at91_map_io,
-        .handle_irq     = at91_aic_handle_irq,
-        .init_early     = kb9202_init_early,
-        .init_irq       = at91_init_irq_default,
-        .init_machine   = kb9202_board_init,
-MACHINE_END