1 files changed, 16 insertions, 13 deletions

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 4b39b9cda75b..cb065febd95e 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,19 +37,10 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
-#include "generic.h"
+#include <asm/arch/at91rm9200_mc.h>
 
+#include "generic.h"
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
-        .console_tty    = 0,                                    /* ttyS0 */
-        .nr_tty         = 3,
-        .tty_map        = { 4, 0, 1, -1, -1 }                   /* ttyS0, ..., ttyS4 */
-};
 
 static void __init kb9202_map_io(void)
 {
@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void)
         /* Set up the LEDs */
         at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
 
-        /* Setup the serial ports and console */
-        at91_init_serial(&kb9202_uart_config);
+        /* DBGU on ttyS0. (Rx & Tx only) */
+        at91_register_uart(0, 0, 0);
+
+        /* USART0 on ttyS1 (Rx & Tx only) */
+        at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+        /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+        at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+        /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+        at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+        /* set serial console to ttyS0 (ie, DBGU) */
+        at91_set_serial_console(0);
 }
 
 static void __init kb9202_init_irq(void)