1 files changed, 143 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
new file mode 100644
index 000000000000..76f6e1e553ea
--- /dev/null
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/arm/mach-at91/board-kb9202.c
+ *
+ *  Copyright (c) 2005 kb_admin
+ *                     KwikByte, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata kb9202_uart_config = {
+        .console_tty    = 0,                                    /* ttyS0 */
+        .nr_tty         = 3,
+        .tty_map        = { 4, 0, 1, -1, -1 }                   /* ttyS0, ..., ttyS4 */
+};
+
+static void __init kb9202_map_io(void)
+{
+        /* Initialize processor: 10 MHz crystal */
+        at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+
+        /* Set up the LEDs */
+        at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
+        /* Setup the serial ports and console */
+        at91_init_serial(&kb9202_uart_config);
+}
+
+static void __init kb9202_init_irq(void)
+{
+        at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata kb9202_eth_data = {
+        .phy_irq_pin    = AT91_PIN_PB29,
+        .is_rmii        = 0,
+};
+
+static struct at91_usbh_data __initdata kb9202_usbh_data = {
+        .ports          = 1,
+};
+
+static struct at91_udc_data __initdata kb9202_udc_data = {
+        .vbus_pin       = AT91_PIN_PB24,
+        .pullup_pin     = AT91_PIN_PB22,
+};
+
+static struct at91_mmc_data __initdata kb9202_mmc_data = {
+        .det_pin        = AT91_PIN_PB2,
+        .slot_b         = 0,
+        .wire4          = 1,
+};
+
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+        {
+                .name   = "nand_fs",
+                .offset = 0,
+                .size   = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+        *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
+        return kb9202_nand_partition;
+}
+
+static struct at91_nand_data __initdata kb9202_nand_data = {
+        .ale            = 22,
+        .cle            = 21,
+        // .det_pin     = ... not there
+        .rdy_pin        = AT91_PIN_PC29,
+        .enable_pin     = AT91_PIN_PC28,
+        .partition_info = nand_partitions,
+};
+
+static void __init kb9202_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* Ethernet */
+        at91_add_device_eth(&kb9202_eth_data);
+        /* USB Host */
+        at91_add_device_usbh(&kb9202_usbh_data);
+        /* USB Device */
+        at91_add_device_udc(&kb9202_udc_data);
+        /* MMC */
+        at91_add_device_mmc(0, &kb9202_mmc_data);
+        /* I2C */
+        at91_add_device_i2c();
+        /* SPI */
+        at91_add_device_spi(NULL, 0);
+        /* NAND */
+        at91_add_device_nand(&kb9202_nand_data);
+}
+
+MACHINE_START(KB9200, "KB920x")
+        /* Maintainer: KwikByte, Inc. */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91rm9200_timer,
+        .map_io         = kb9202_map_io,
+        .init_irq       = kb9202_init_irq,
+        .init_machine   = kb9202_board_init,
+MACHINE_END