1 files changed, 149 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
new file mode 100644
index 000000000000..b4518619063a
--- /dev/null
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/arm/mach-at91/board-carmeva.c
+ *
+ *  Copyright (c) 2005 Peer Georgi
+ *                     Conitec Datasystems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata carmeva_uart_config = {
+        .console_tty    = 0,                            /* ttyS0 */
+        .nr_tty         = 2,
+        .tty_map        = { 4, 1, -1, -1, -1 }          /* ttyS0, ..., ttyS4 */
+};
+
+static void __init carmeva_map_io(void)
+{
+        /* Initialize processor: 20.000 MHz crystal */
+        at91rm9200_initialize(20000000, AT91RM9200_BGA);
+
+        /* Setup the serial ports and console */
+        at91_init_serial(&carmeva_uart_config);
+}
+
+static void __init carmeva_init_irq(void)
+{
+        at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata carmeva_eth_data = {
+        .phy_irq_pin    = AT91_PIN_PC4,
+        .is_rmii        = 1,
+};
+
+static struct at91_usbh_data __initdata carmeva_usbh_data = {
+        .ports          = 2,
+};
+
+static struct at91_udc_data __initdata carmeva_udc_data = {
+        .vbus_pin       = AT91_PIN_PD12,
+        .pullup_pin     = AT91_PIN_PD9,
+};
+
+/* FIXME: user dependend */
+// static struct at91_cf_data __initdata carmeva_cf_data = {
+//      .det_pin        = AT91_PIN_PB0,
+//      .rst_pin        = AT91_PIN_PC5,
+        // .irq_pin     = ... not connected
+        // .vcc_pin     = ... always powered
+// };
+
+static struct at91_mmc_data __initdata carmeva_mmc_data = {
+        .slot_b         = 0,
+        .wire4          = 1,
+        .det_pin        = AT91_PIN_PB10,
+        .wp_pin         = AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+        { /* DataFlash chip */
+                .modalias = "mtd_dataflash",
+                .chip_select  = 0,
+                .max_speed_hz = 10 * 1000 * 1000,
+        },
+        { /* User accessable spi - cs1 (250KHz) */
+                .modalias = "spi-cs1",
+                .chip_select  = 1,
+                .max_speed_hz = 250 *  1000,
+        },
+        { /* User accessable spi - cs2 (1MHz) */
+                .modalias = "spi-cs2",
+                .chip_select  = 2,
+                .max_speed_hz = 1 * 1000 *  1000,
+        },
+        { /* User accessable spi - cs3 (10MHz) */
+                .modalias = "spi-cs3",
+                .chip_select  = 3,
+                .max_speed_hz = 10 * 1000 *  1000,
+        },
+};
+
+static void __init carmeva_board_init(void)
+{
+        /* Serial */
+        at91_add_device_serial();
+        /* Ethernet */
+        at91_add_device_eth(&carmeva_eth_data);
+        /* USB Host */
+        at91_add_device_usbh(&carmeva_usbh_data);
+        /* USB Device */
+        at91_add_device_udc(&carmeva_udc_data);
+        /* I2C */
+        at91_add_device_i2c();
+        /* SPI */
+        at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
+        /* Compact Flash */
+//      at91_add_device_cf(&carmeva_cf_data);
+        /* MMC */
+        at91_add_device_mmc(0, &carmeva_mmc_data);
+}
+
+MACHINE_START(CARMEVA, "Carmeva")
+        /* Maintainer: Conitec Datasystems */
+        .phys_io        = AT91_BASE_SYS,
+        .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+        .boot_params    = AT91_SDRAM_BASE + 0x100,
+        .timer          = &at91rm9200_timer,
+        .map_io         = carmeva_map_io,
+        .init_irq       = carmeva_init_irq,
+        .init_machine   = carmeva_board_init,
+MACHINE_END