1 files changed, 2 insertions, 396 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6071f4c3d654..440682b708f3 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,8 +1,5 @@
 if ARCH_AT91
 
-config HAVE_AT91_DATAFLASH_CARD
-        bool
-
 config HAVE_AT91_DBGU0
         bool
 
@@ -93,394 +90,13 @@ config SOC_AT91SAM9N12
         help
           Select this if you are using Atmel's AT91SAM9N12 SoC.
 
-choice
-        prompt "Atmel AT91 Processor Devices for non DT boards"
-
-config ARCH_AT91_NONE
-        bool "None"
-
-config ARCH_AT91RM9200
-        bool "AT91RM9200"
-        select SOC_AT91RM9200
-
-config ARCH_AT91SAM9260
-        bool "AT91SAM9260 or AT91SAM9XE"
-        select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9261
-        bool "AT91SAM9261"
-        select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
-        bool "AT91SAM9G10"
-        select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9263
-        bool "AT91SAM9263"
-        select SOC_AT91SAM9263
-
-config ARCH_AT91SAM9RL
-        bool "AT91SAM9RL"
-        select SOC_AT91SAM9RL
-
-config ARCH_AT91SAM9G20
-        bool "AT91SAM9G20"
-        select SOC_AT91SAM9260
-
-config ARCH_AT91SAM9G45
-        bool "AT91SAM9G45"
-        select SOC_AT91SAM9G45
-
-config ARCH_AT91X40
-        bool "AT91x40"
-        depends on !MMU
-        select ARCH_USES_GETTIMEOFFSET
-        select MULTI_IRQ_HANDLER
-        select SPARSE_IRQ
-
-endchoice
-
 config AT91_PMC_UNIT
         bool
         default !ARCH_AT91X40
 
 # ----------------------------------------------------------
 
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
-        bool "Ajeco 1ARM Single Board Computer"
-        help
-          Select this if you are using Ajeco's 1ARM Single Board Computer.
-          <http://www.ajeco.fi/>
-
-config ARCH_AT91RM9200DK
-        bool "Atmel AT91RM9200-DK Development board"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91RM9200-DK Development board.
-          (Discontinued)
-
-config MACH_AT91RM9200EK
-        bool "Atmel AT91RM9200-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
-        bool "Cogent CSB337"
-        help
-          Select this if you are using Cogent's CSB337 board.
-          <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
-        bool "Cogent CSB637"
-        help
-          Select this if you are using Cogent's CSB637 board.
-          <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
-        bool "Conitec ARM&EVA"
-        help
-          Select this if you are using Conitec's AT91RM9200-MCU-Module.
-          <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
-        bool "Embest ATEB9200"
-        help
-          Select this if you are using Embest's ATEB9200 board.
-          <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
-        bool "KwikByte KB920x"
-        help
-          Select this if you are using KwikByte's KB920x board.
-          <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
-        bool "picotux 200"
-        help
-          Select this if you are using a picotux 200.
-          <http://www.picotux.com/>
-
-config MACH_KAFA
-        bool "Sperry-Sun KAFA board"
-        help
-          Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
-        bool "emQbit ECB_AT91 SBC"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using emQbit's ECB_AT91 board.
-          <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
-        bool "ucDragon YL-9200"
-        help
-          Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
-        bool "Eukrea CPUAT91"
-        help
-          Select this if you are using the Eukrea Electromatique's
-          CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
-        bool "eco920"
-        help
-          Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
-        bool "RSI Embedded Webserver"
-        depends on ARCH_AT91RM9200
-        help
-          Select this if you are using RSIs EWS board.
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
-        bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
-        bool "KwikByte KB9260 (CAM60) board"
-        help
-          Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
-          <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
-        bool "Olimex SAM9-L9260 board"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
-          <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
-        bool "Custom afeb9260 board v1"
-        help
-          Select this if you are using custom afeb9260 board based on
-          open hardware design. Select this for revision 1 of the board.
-          <svn://194.85.238.22/home/users/george/svn/arm9eb>
-          <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_USB_A9260
-        bool "CALAO USB-A9260"
-        help
-          Select this if you are using a Calao Systems USB-A9260.
-          <http://www.calao-systems.com>
-
-config MACH_QIL_A9260
-        bool "CALAO QIL-A9260 board"
-        help
-          Select this if you are using a Calao Systems QIL-A9260 Board.
-          <http://www.calao-systems.com>
-
-config MACH_CPU9260
-        bool "Eukrea CPU9260 board"
-        help
-          Select this if you are using a Eukrea Electromatique's
-          CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
-        bool "Flexibity Connect board"
-        help
-          Select this if you are using Flexibity Connect board
-          <http://www.flexibity.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-        bool "Atmel AT91SAM9261-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-        bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-        bool "Atmel AT91SAM9263-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-        bool "CALAO USB-A9263"
-        help
-          Select this if you are using a Calao Systems USB-A9263.
-          <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-        bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-        help
-          Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
-        bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
-          that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
-        depends on MACH_AT91SAM9G20EK
-        bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-        help
-          Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-          with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
-          onwards.
-          <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
-        bool "Eukrea CPU9G20 board"
-        help
-          Select this if you are using a Eukrea Electromatique's
-          CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_ACMENETUSFOXG20
-        bool "Acme Systems srl FOX Board G20"
-        help
-          Select this if you are using Acme Systems
-          FOX Board G20 <http://www.acmesystems.it>
-
-config MACH_PORTUXG20
-        bool "taskit PortuxG20"
-        help
-          Select this if you are using taskit's PortuxG20.
-          <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
-        bool "taskit Stamp9G20 CPU module"
-        help
-          Select this if you are using taskit's Stamp9G20 CPU module on its
-          evaluation board.
-          <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
-        bool "PControl G20 CPU module"
-        help
-          Select this if you are using taskit's Stamp9G20 CPU module on this
-          carrier board, beeing the decentralized unit of a building automation
-          system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
-        bool "GS_IA18_S board"
-        help
-          This enables support for the GS_IA18_S board
-          produced by GeoSIG Ltd company. This is an internet accelerograph.
-          <http://www.geosig.com>
-
-config MACH_USB_A9G20
-        bool "CALAO USB-A9G20"
-        depends on ARCH_AT91SAM9G20
-        help
-          Select this if you are using a Calao Systems USB-A9G20.
-          <http://www.calao-systems.com>
-
-endif
-
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
-
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
-        bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-        help
-          Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-          Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
-          families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
-          <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
-        bool "Atmel AT91EB01 Evaluation Kit"
-        help
-          Select this if you are using Atmel's AT91EB01 Evaluation Kit.
-          It is also a popular target for simulators such as GDB's
-          ARM simulator (commonly known as the ARMulator) and the
-          Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
+source arch/arm/mach-at91/Kconfig.non_dt
 
 comment "Generic Board Type"
 
@@ -492,7 +108,7 @@ config MACH_AT91RM9200_DT
           Select this if you want to experiment device-tree with
           an Atmel RM9200 Evaluation Kit.
 
-config MACH_AT91SAM_DT
+config MACH_AT91SAM9_DT
         bool "Atmel AT91SAM Evaluation Kits with device-tree support"
         depends on SOC_AT91SAM9
         select USE_OF
@@ -502,16 +118,6 @@ config MACH_AT91SAM_DT
 
 # ----------------------------------------------------------
 
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
-        bool "Enable DataFlash Card support"
-        depends on HAVE_AT91_DATAFLASH_CARD
-        help
-          Enable support for the DataFlash card.
-
-# ----------------------------------------------------------
-
 comment "AT91 Feature Selections"
 
 config AT91_PROGRAMMABLE_CLOCKS