diff options
Diffstat (limited to 'arch/arm/common/sharpsl_pm.c')
-rw-r--r-- | arch/arm/common/sharpsl_pm.c | 839 |
1 files changed, 839 insertions, 0 deletions
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c new file mode 100644 index 000000000000..978d32e82d39 --- /dev/null +++ b/arch/arm/common/sharpsl_pm.c | |||
@@ -0,0 +1,839 @@ | |||
1 | /* | ||
2 | * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00 | ||
3 | * series of PDAs | ||
4 | * | ||
5 | * Copyright (c) 2004-2005 Richard Purdie | ||
6 | * | ||
7 | * Based on code written by Sharp for 2.4 kernels | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify | ||
10 | * it under the terms of the GNU General Public License version 2 as | ||
11 | * published by the Free Software Foundation. | ||
12 | * | ||
13 | */ | ||
14 | |||
15 | #undef DEBUG | ||
16 | |||
17 | #include <linux/module.h> | ||
18 | #include <linux/timer.h> | ||
19 | #include <linux/init.h> | ||
20 | #include <linux/kernel.h> | ||
21 | #include <linux/apm_bios.h> | ||
22 | #include <linux/delay.h> | ||
23 | #include <linux/interrupt.h> | ||
24 | #include <linux/platform_device.h> | ||
25 | |||
26 | #include <asm/hardware.h> | ||
27 | #include <asm/mach-types.h> | ||
28 | #include <asm/irq.h> | ||
29 | #include <asm/apm.h> | ||
30 | #include <asm/arch/pm.h> | ||
31 | #include <asm/arch/pxa-regs.h> | ||
32 | #include <asm/arch/sharpsl.h> | ||
33 | #include <asm/hardware/sharpsl_pm.h> | ||
34 | |||
35 | /* | ||
36 | * Constants | ||
37 | */ | ||
38 | #define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ | ||
39 | #define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ | ||
40 | #define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ | ||
41 | #define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ | ||
42 | #define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ | ||
43 | #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ | ||
44 | #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */ | ||
45 | #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */ | ||
46 | #define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */ | ||
47 | #define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */ | ||
48 | #define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ | ||
49 | #define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ | ||
50 | |||
51 | #define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ | ||
52 | #define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ | ||
53 | #define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ | ||
54 | #define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ | ||
55 | #define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ | ||
56 | #define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ | ||
57 | |||
58 | /* | ||
59 | * Prototypes | ||
60 | */ | ||
61 | static int sharpsl_off_charge_battery(void); | ||
62 | static int sharpsl_check_battery_temp(void); | ||
63 | static int sharpsl_check_battery_voltage(void); | ||
64 | static int sharpsl_ac_check(void); | ||
65 | static int sharpsl_fatal_check(void); | ||
66 | static int sharpsl_average_value(int ad); | ||
67 | static void sharpsl_average_clear(void); | ||
68 | static void sharpsl_charge_toggle(void *private_); | ||
69 | static void sharpsl_battery_thread(void *private_); | ||
70 | |||
71 | |||
72 | /* | ||
73 | * Variables | ||
74 | */ | ||
75 | struct sharpsl_pm_status sharpsl_pm; | ||
76 | DECLARE_WORK(toggle_charger, sharpsl_charge_toggle, NULL); | ||
77 | DECLARE_WORK(sharpsl_bat, sharpsl_battery_thread, NULL); | ||
78 | |||
79 | |||
80 | static int get_percentage(int voltage) | ||
81 | { | ||
82 | int i = sharpsl_pm.machinfo->bat_levels - 1; | ||
83 | struct battery_thresh *thresh; | ||
84 | |||
85 | if (sharpsl_pm.charge_mode == CHRG_ON) | ||
86 | thresh=sharpsl_pm.machinfo->bat_levels_acin; | ||
87 | else | ||
88 | thresh=sharpsl_pm.machinfo->bat_levels_noac; | ||
89 | |||
90 | while (i > 0 && (voltage > thresh[i].voltage)) | ||
91 | i--; | ||
92 | |||
93 | return thresh[i].percentage; | ||
94 | } | ||
95 | |||
96 | static int get_apm_status(int voltage) | ||
97 | { | ||
98 | int low_thresh, high_thresh; | ||
99 | |||
100 | if (sharpsl_pm.charge_mode == CHRG_ON) { | ||
101 | high_thresh = sharpsl_pm.machinfo->status_high_acin; | ||
102 | low_thresh = sharpsl_pm.machinfo->status_low_acin; | ||
103 | } else { | ||
104 | high_thresh = sharpsl_pm.machinfo->status_high_noac; | ||
105 | low_thresh = sharpsl_pm.machinfo->status_low_noac; | ||
106 | } | ||
107 | |||
108 | if (voltage >= high_thresh) | ||
109 | return APM_BATTERY_STATUS_HIGH; | ||
110 | if (voltage >= low_thresh) | ||
111 | return APM_BATTERY_STATUS_LOW; | ||
112 | return APM_BATTERY_STATUS_CRITICAL; | ||
113 | } | ||
114 | |||
115 | void sharpsl_battery_kick(void) | ||
116 | { | ||
117 | schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125)); | ||
118 | } | ||
119 | EXPORT_SYMBOL(sharpsl_battery_kick); | ||
120 | |||
121 | |||
122 | static void sharpsl_battery_thread(void *private_) | ||
123 | { | ||
124 | int voltage, percent, apm_status, i = 0; | ||
125 | |||
126 | if (!sharpsl_pm.machinfo) | ||
127 | return; | ||
128 | |||
129 | sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); | ||
130 | |||
131 | /* Corgi cannot confirm when battery fully charged so periodically kick! */ | ||
132 | if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) | ||
133 | && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) | ||
134 | schedule_work(&toggle_charger); | ||
135 | |||
136 | while(1) { | ||
137 | voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); | ||
138 | |||
139 | if (voltage > 0) break; | ||
140 | if (i++ > 5) { | ||
141 | voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage; | ||
142 | dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n"); | ||
143 | break; | ||
144 | } | ||
145 | } | ||
146 | |||
147 | voltage = sharpsl_average_value(voltage); | ||
148 | apm_status = get_apm_status(voltage); | ||
149 | percent = get_percentage(voltage); | ||
150 | |||
151 | /* At low battery voltages, the voltage has a tendency to start | ||
152 | creeping back up so we try to avoid this here */ | ||
153 | if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) { | ||
154 | sharpsl_pm.battstat.mainbat_voltage = voltage; | ||
155 | sharpsl_pm.battstat.mainbat_status = apm_status; | ||
156 | sharpsl_pm.battstat.mainbat_percent = percent; | ||
157 | } | ||
158 | |||
159 | dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, | ||
160 | sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); | ||
161 | |||
162 | /* If battery is low. limit backlight intensity to save power. */ | ||
163 | if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) | ||
164 | && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || | ||
165 | (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { | ||
166 | if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { | ||
167 | corgibl_limit_intensity(1); | ||
168 | sharpsl_pm.flags |= SHARPSL_BL_LIMIT; | ||
169 | } | ||
170 | } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { | ||
171 | corgibl_limit_intensity(0); | ||
172 | sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; | ||
173 | } | ||
174 | |||
175 | /* Suspend if critical battery level */ | ||
176 | if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) | ||
177 | && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL) | ||
178 | && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) { | ||
179 | sharpsl_pm.flags |= SHARPSL_APM_QUEUED; | ||
180 | dev_err(sharpsl_pm.dev, "Fatal Off\n"); | ||
181 | apm_queue_event(APM_CRITICAL_SUSPEND); | ||
182 | } | ||
183 | |||
184 | schedule_delayed_work(&sharpsl_bat, SHARPSL_BATCHK_TIME); | ||
185 | } | ||
186 | |||
187 | void sharpsl_pm_led(int val) | ||
188 | { | ||
189 | if (val == SHARPSL_LED_ERROR) { | ||
190 | dev_err(sharpsl_pm.dev, "Charging Error!\n"); | ||
191 | } else if (val == SHARPSL_LED_ON) { | ||
192 | dev_dbg(sharpsl_pm.dev, "Charge LED On\n"); | ||
193 | |||
194 | } else { | ||
195 | dev_dbg(sharpsl_pm.dev, "Charge LED Off\n"); | ||
196 | |||
197 | } | ||
198 | } | ||
199 | |||
200 | static void sharpsl_charge_on(void) | ||
201 | { | ||
202 | dev_dbg(sharpsl_pm.dev, "Turning Charger On\n"); | ||
203 | |||
204 | sharpsl_pm.full_count = 0; | ||
205 | sharpsl_pm.charge_mode = CHRG_ON; | ||
206 | schedule_delayed_work(&toggle_charger, msecs_to_jiffies(250)); | ||
207 | schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(500)); | ||
208 | } | ||
209 | |||
210 | static void sharpsl_charge_off(void) | ||
211 | { | ||
212 | dev_dbg(sharpsl_pm.dev, "Turning Charger Off\n"); | ||
213 | |||
214 | sharpsl_pm.machinfo->charge(0); | ||
215 | sharpsl_pm_led(SHARPSL_LED_OFF); | ||
216 | sharpsl_pm.charge_mode = CHRG_OFF; | ||
217 | |||
218 | schedule_work(&sharpsl_bat); | ||
219 | } | ||
220 | |||
221 | static void sharpsl_charge_error(void) | ||
222 | { | ||
223 | sharpsl_pm_led(SHARPSL_LED_ERROR); | ||
224 | sharpsl_pm.machinfo->charge(0); | ||
225 | sharpsl_pm.charge_mode = CHRG_ERROR; | ||
226 | } | ||
227 | |||
228 | static void sharpsl_charge_toggle(void *private_) | ||
229 | { | ||
230 | dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies); | ||
231 | |||
232 | if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { | ||
233 | sharpsl_charge_off(); | ||
234 | return; | ||
235 | } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) { | ||
236 | sharpsl_charge_error(); | ||
237 | return; | ||
238 | } | ||
239 | |||
240 | sharpsl_pm_led(SHARPSL_LED_ON); | ||
241 | sharpsl_pm.machinfo->charge(0); | ||
242 | mdelay(SHARPSL_CHARGE_WAIT_TIME); | ||
243 | sharpsl_pm.machinfo->charge(1); | ||
244 | |||
245 | sharpsl_pm.charge_start_time = jiffies; | ||
246 | } | ||
247 | |||
248 | static void sharpsl_ac_timer(unsigned long data) | ||
249 | { | ||
250 | int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); | ||
251 | |||
252 | dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin); | ||
253 | |||
254 | sharpsl_average_clear(); | ||
255 | if (acin && (sharpsl_pm.charge_mode != CHRG_ON)) | ||
256 | sharpsl_charge_on(); | ||
257 | else if (sharpsl_pm.charge_mode == CHRG_ON) | ||
258 | sharpsl_charge_off(); | ||
259 | |||
260 | schedule_work(&sharpsl_bat); | ||
261 | } | ||
262 | |||
263 | |||
264 | irqreturn_t sharpsl_ac_isr(int irq, void *dev_id, struct pt_regs *fp) | ||
265 | { | ||
266 | /* Delay the event slightly to debounce */ | ||
267 | /* Must be a smaller delay than the chrg_full_isr below */ | ||
268 | mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); | ||
269 | |||
270 | return IRQ_HANDLED; | ||
271 | } | ||
272 | |||
273 | static void sharpsl_chrg_full_timer(unsigned long data) | ||
274 | { | ||
275 | dev_dbg(sharpsl_pm.dev, "Charge Full at time: %lx\n", jiffies); | ||
276 | |||
277 | sharpsl_pm.full_count++; | ||
278 | |||
279 | if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) { | ||
280 | dev_dbg(sharpsl_pm.dev, "Charge Full: AC removed - stop charging!\n"); | ||
281 | if (sharpsl_pm.charge_mode == CHRG_ON) | ||
282 | sharpsl_charge_off(); | ||
283 | } else if (sharpsl_pm.full_count < 2) { | ||
284 | dev_dbg(sharpsl_pm.dev, "Charge Full: Count too low\n"); | ||
285 | schedule_work(&toggle_charger); | ||
286 | } else if (time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_FINISH_TIME)) { | ||
287 | dev_dbg(sharpsl_pm.dev, "Charge Full: Interrupt generated too slowly - retry.\n"); | ||
288 | schedule_work(&toggle_charger); | ||
289 | } else { | ||
290 | sharpsl_charge_off(); | ||
291 | sharpsl_pm.charge_mode = CHRG_DONE; | ||
292 | dev_dbg(sharpsl_pm.dev, "Charge Full: Charging Finished\n"); | ||
293 | } | ||
294 | } | ||
295 | |||
296 | /* Charging Finished Interrupt (Not present on Corgi) */ | ||
297 | /* Can trigger at the same time as an AC staus change so | ||
298 | delay until after that has been processed */ | ||
299 | irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id, struct pt_regs *fp) | ||
300 | { | ||
301 | if (sharpsl_pm.flags & SHARPSL_SUSPENDED) | ||
302 | return IRQ_HANDLED; | ||
303 | |||
304 | /* delay until after any ac interrupt */ | ||
305 | mod_timer(&sharpsl_pm.chrg_full_timer, jiffies + msecs_to_jiffies(500)); | ||
306 | |||
307 | return IRQ_HANDLED; | ||
308 | } | ||
309 | |||
310 | irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id, struct pt_regs *fp) | ||
311 | { | ||
312 | int is_fatal = 0; | ||
313 | |||
314 | if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) { | ||
315 | dev_err(sharpsl_pm.dev, "Battery now Unlocked! Suspending.\n"); | ||
316 | is_fatal = 1; | ||
317 | } | ||
318 | |||
319 | if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)) { | ||
320 | dev_err(sharpsl_pm.dev, "Fatal Batt Error! Suspending.\n"); | ||
321 | is_fatal = 1; | ||
322 | } | ||
323 | |||
324 | if (!(sharpsl_pm.flags & SHARPSL_APM_QUEUED) && is_fatal) { | ||
325 | sharpsl_pm.flags |= SHARPSL_APM_QUEUED; | ||
326 | apm_queue_event(APM_CRITICAL_SUSPEND); | ||
327 | } | ||
328 | |||
329 | return IRQ_HANDLED; | ||
330 | } | ||
331 | |||
332 | /* | ||
333 | * Maintain an average of the last 10 readings | ||
334 | */ | ||
335 | #define SHARPSL_CNV_VALUE_NUM 10 | ||
336 | static int sharpsl_ad_index; | ||
337 | |||
338 | static void sharpsl_average_clear(void) | ||
339 | { | ||
340 | sharpsl_ad_index = 0; | ||
341 | } | ||
342 | |||
343 | static int sharpsl_average_value(int ad) | ||
344 | { | ||
345 | int i, ad_val = 0; | ||
346 | static int sharpsl_ad[SHARPSL_CNV_VALUE_NUM+1]; | ||
347 | |||
348 | if (sharpsl_pm.battstat.mainbat_status != APM_BATTERY_STATUS_HIGH) { | ||
349 | sharpsl_ad_index = 0; | ||
350 | return ad; | ||
351 | } | ||
352 | |||
353 | sharpsl_ad[sharpsl_ad_index] = ad; | ||
354 | sharpsl_ad_index++; | ||
355 | if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) { | ||
356 | for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++) | ||
357 | sharpsl_ad[i] = sharpsl_ad[i+1]; | ||
358 | sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1; | ||
359 | } | ||
360 | for (i=0; i < sharpsl_ad_index; i++) | ||
361 | ad_val += sharpsl_ad[i]; | ||
362 | |||
363 | return (ad_val / sharpsl_ad_index); | ||
364 | } | ||
365 | |||
366 | /* | ||
367 | * Take an array of 5 integers, remove the maximum and minimum values | ||
368 | * and return the average. | ||
369 | */ | ||
370 | static int get_select_val(int *val) | ||
371 | { | ||
372 | int i, j, k, temp, sum = 0; | ||
373 | |||
374 | /* Find MAX val */ | ||
375 | temp = val[0]; | ||
376 | j=0; | ||
377 | for (i=1; i<5; i++) { | ||
378 | if (temp < val[i]) { | ||
379 | temp = val[i]; | ||
380 | j = i; | ||
381 | } | ||
382 | } | ||
383 | |||
384 | /* Find MIN val */ | ||
385 | temp = val[4]; | ||
386 | k=4; | ||
387 | for (i=3; i>=0; i--) { | ||
388 | if (temp > val[i]) { | ||
389 | temp = val[i]; | ||
390 | k = i; | ||
391 | } | ||
392 | } | ||
393 | |||
394 | for (i=0; i<5; i++) | ||
395 | if (i != j && i != k ) | ||
396 | sum += val[i]; | ||
397 | |||
398 | dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]); | ||
399 | |||
400 | return (sum/3); | ||
401 | } | ||
402 | |||
403 | static int sharpsl_check_battery_temp(void) | ||
404 | { | ||
405 | int val, i, buff[5]; | ||
406 | |||
407 | /* Check battery temperature */ | ||
408 | for (i=0; i<5; i++) { | ||
409 | mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); | ||
410 | sharpsl_pm.machinfo->measure_temp(1); | ||
411 | mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP); | ||
412 | buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP); | ||
413 | sharpsl_pm.machinfo->measure_temp(0); | ||
414 | } | ||
415 | |||
416 | val = get_select_val(buff); | ||
417 | |||
418 | dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); | ||
419 | if (val > SHARPSL_CHARGE_ON_TEMP) | ||
420 | return -1; | ||
421 | |||
422 | return 0; | ||
423 | } | ||
424 | |||
425 | static int sharpsl_check_battery_voltage(void) | ||
426 | { | ||
427 | int val, i, buff[5]; | ||
428 | |||
429 | /* disable charge, enable discharge */ | ||
430 | sharpsl_pm.machinfo->charge(0); | ||
431 | sharpsl_pm.machinfo->discharge(1); | ||
432 | mdelay(SHARPSL_WAIT_DISCHARGE_ON); | ||
433 | |||
434 | if (sharpsl_pm.machinfo->discharge1) | ||
435 | sharpsl_pm.machinfo->discharge1(1); | ||
436 | |||
437 | /* Check battery voltage */ | ||
438 | for (i=0; i<5; i++) { | ||
439 | buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); | ||
440 | mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); | ||
441 | } | ||
442 | |||
443 | if (sharpsl_pm.machinfo->discharge1) | ||
444 | sharpsl_pm.machinfo->discharge1(0); | ||
445 | |||
446 | sharpsl_pm.machinfo->discharge(0); | ||
447 | |||
448 | val = get_select_val(buff); | ||
449 | dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); | ||
450 | |||
451 | if (val < SHARPSL_CHARGE_ON_VOLT) | ||
452 | return -1; | ||
453 | |||
454 | return 0; | ||
455 | } | ||
456 | |||
457 | static int sharpsl_ac_check(void) | ||
458 | { | ||
459 | int temp, i, buff[5]; | ||
460 | |||
461 | for (i=0; i<5; i++) { | ||
462 | buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT); | ||
463 | mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN); | ||
464 | } | ||
465 | |||
466 | temp = get_select_val(buff); | ||
467 | dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); | ||
468 | |||
469 | if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { | ||
470 | dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); | ||
471 | return -1; | ||
472 | } | ||
473 | |||
474 | return 0; | ||
475 | } | ||
476 | |||
477 | #ifdef CONFIG_PM | ||
478 | static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state) | ||
479 | { | ||
480 | sharpsl_pm.flags |= SHARPSL_SUSPENDED; | ||
481 | flush_scheduled_work(); | ||
482 | |||
483 | if (sharpsl_pm.charge_mode == CHRG_ON) | ||
484 | sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG; | ||
485 | else | ||
486 | sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; | ||
487 | |||
488 | return 0; | ||
489 | } | ||
490 | |||
491 | static int sharpsl_pm_resume(struct platform_device *pdev) | ||
492 | { | ||
493 | /* Clear the reset source indicators as they break the bootloader upon reboot */ | ||
494 | RCSR = 0x0f; | ||
495 | sharpsl_average_clear(); | ||
496 | sharpsl_pm.flags &= ~SHARPSL_APM_QUEUED; | ||
497 | sharpsl_pm.flags &= ~SHARPSL_SUSPENDED; | ||
498 | |||
499 | return 0; | ||
500 | } | ||
501 | |||
502 | static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) | ||
503 | { | ||
504 | dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR); | ||
505 | |||
506 | dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG); | ||
507 | /* not charging and AC-IN! */ | ||
508 | |||
509 | if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) { | ||
510 | dev_dbg(sharpsl_pm.dev, "Activating Offline Charger...\n"); | ||
511 | sharpsl_pm.charge_mode = CHRG_OFF; | ||
512 | sharpsl_pm.flags &= ~SHARPSL_DO_OFFLINE_CHRG; | ||
513 | sharpsl_off_charge_battery(); | ||
514 | } | ||
515 | |||
516 | sharpsl_pm.machinfo->presuspend(); | ||
517 | |||
518 | PEDR = 0xffffffff; /* clear it */ | ||
519 | |||
520 | sharpsl_pm.flags &= ~SHARPSL_ALARM_ACTIVE; | ||
521 | if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) { | ||
522 | RTSR &= RTSR_ALE; | ||
523 | RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND; | ||
524 | dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR); | ||
525 | sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE; | ||
526 | } else if (alarm_enable) { | ||
527 | RTSR &= RTSR_ALE; | ||
528 | RTAR = alarm_time; | ||
529 | dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR); | ||
530 | } else { | ||
531 | dev_dbg(sharpsl_pm.dev, "No alarms set.\n"); | ||
532 | } | ||
533 | |||
534 | pxa_pm_enter(state); | ||
535 | |||
536 | sharpsl_pm.machinfo->postsuspend(); | ||
537 | |||
538 | dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR); | ||
539 | } | ||
540 | |||
541 | static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state) | ||
542 | { | ||
543 | if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) ) | ||
544 | { | ||
545 | if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) { | ||
546 | dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n"); | ||
547 | corgi_goto_sleep(alarm_time, alarm_enable, state); | ||
548 | return 1; | ||
549 | } | ||
550 | if(sharpsl_off_charge_battery()) { | ||
551 | dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n"); | ||
552 | corgi_goto_sleep(alarm_time, alarm_enable, state); | ||
553 | return 1; | ||
554 | } | ||
555 | dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n"); | ||
556 | } | ||
557 | |||
558 | if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) ) | ||
559 | { | ||
560 | dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n"); | ||
561 | corgi_goto_sleep(alarm_time, alarm_enable, state); | ||
562 | return 1; | ||
563 | } | ||
564 | |||
565 | return 0; | ||
566 | } | ||
567 | |||
568 | static int corgi_pxa_pm_enter(suspend_state_t state) | ||
569 | { | ||
570 | unsigned long alarm_time = RTAR; | ||
571 | unsigned int alarm_status = ((RTSR & RTSR_ALE) != 0); | ||
572 | |||
573 | dev_dbg(sharpsl_pm.dev, "SharpSL suspending for first time.\n"); | ||
574 | |||
575 | corgi_goto_sleep(alarm_time, alarm_status, state); | ||
576 | |||
577 | while (corgi_enter_suspend(alarm_time,alarm_status,state)) | ||
578 | {} | ||
579 | |||
580 | dev_dbg(sharpsl_pm.dev, "SharpSL resuming...\n"); | ||
581 | |||
582 | return 0; | ||
583 | } | ||
584 | #endif | ||
585 | |||
586 | |||
587 | /* | ||
588 | * Check for fatal battery errors | ||
589 | * Fatal returns -1 | ||
590 | */ | ||
591 | static int sharpsl_fatal_check(void) | ||
592 | { | ||
593 | int buff[5], temp, i, acin; | ||
594 | |||
595 | dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); | ||
596 | |||
597 | /* Check AC-Adapter */ | ||
598 | acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); | ||
599 | |||
600 | if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { | ||
601 | sharpsl_pm.machinfo->charge(0); | ||
602 | udelay(100); | ||
603 | sharpsl_pm.machinfo->discharge(1); /* enable discharge */ | ||
604 | mdelay(SHARPSL_WAIT_DISCHARGE_ON); | ||
605 | } | ||
606 | |||
607 | if (sharpsl_pm.machinfo->discharge1) | ||
608 | sharpsl_pm.machinfo->discharge1(1); | ||
609 | |||
610 | /* Check battery : check inserting battery ? */ | ||
611 | for (i=0; i<5; i++) { | ||
612 | buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); | ||
613 | mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); | ||
614 | } | ||
615 | |||
616 | if (sharpsl_pm.machinfo->discharge1) | ||
617 | sharpsl_pm.machinfo->discharge1(0); | ||
618 | |||
619 | if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { | ||
620 | udelay(100); | ||
621 | sharpsl_pm.machinfo->charge(1); | ||
622 | sharpsl_pm.machinfo->discharge(0); | ||
623 | } | ||
624 | |||
625 | temp = get_select_val(buff); | ||
626 | dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); | ||
627 | |||
628 | if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || | ||
629 | (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) | ||
630 | return -1; | ||
631 | return 0; | ||
632 | } | ||
633 | |||
634 | static int sharpsl_off_charge_error(void) | ||
635 | { | ||
636 | dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); | ||
637 | sharpsl_pm.machinfo->charge(0); | ||
638 | sharpsl_pm_led(SHARPSL_LED_ERROR); | ||
639 | sharpsl_pm.charge_mode = CHRG_ERROR; | ||
640 | return 1; | ||
641 | } | ||
642 | |||
643 | /* | ||
644 | * Charging Control while suspended | ||
645 | * Return 1 - go straight to sleep | ||
646 | * Return 0 - sleep or wakeup depending on other factors | ||
647 | */ | ||
648 | static int sharpsl_off_charge_battery(void) | ||
649 | { | ||
650 | int time; | ||
651 | |||
652 | dev_dbg(sharpsl_pm.dev, "Charge Mode: %d\n", sharpsl_pm.charge_mode); | ||
653 | |||
654 | if (sharpsl_pm.charge_mode == CHRG_OFF) { | ||
655 | dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 1\n"); | ||
656 | |||
657 | /* AC Check */ | ||
658 | if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0)) | ||
659 | return sharpsl_off_charge_error(); | ||
660 | |||
661 | /* Start Charging */ | ||
662 | sharpsl_pm_led(SHARPSL_LED_ON); | ||
663 | sharpsl_pm.machinfo->charge(0); | ||
664 | mdelay(SHARPSL_CHARGE_WAIT_TIME); | ||
665 | sharpsl_pm.machinfo->charge(1); | ||
666 | |||
667 | sharpsl_pm.charge_mode = CHRG_ON; | ||
668 | sharpsl_pm.full_count = 0; | ||
669 | |||
670 | return 1; | ||
671 | } else if (sharpsl_pm.charge_mode != CHRG_ON) { | ||
672 | return 1; | ||
673 | } | ||
674 | |||
675 | if (sharpsl_pm.full_count == 0) { | ||
676 | int time; | ||
677 | |||
678 | dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 2\n"); | ||
679 | |||
680 | if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0)) | ||
681 | return sharpsl_off_charge_error(); | ||
682 | |||
683 | sharpsl_pm.machinfo->charge(0); | ||
684 | mdelay(SHARPSL_CHARGE_WAIT_TIME); | ||
685 | sharpsl_pm.machinfo->charge(1); | ||
686 | sharpsl_pm.charge_mode = CHRG_ON; | ||
687 | |||
688 | mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); | ||
689 | |||
690 | time = RCNR; | ||
691 | while(1) { | ||
692 | /* Check if any wakeup event had occured */ | ||
693 | if (sharpsl_pm.machinfo->charger_wakeup() != 0) | ||
694 | return 0; | ||
695 | /* Check for timeout */ | ||
696 | if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) | ||
697 | return 1; | ||
698 | if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { | ||
699 | dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); | ||
700 | sharpsl_pm.full_count++; | ||
701 | sharpsl_pm.machinfo->charge(0); | ||
702 | mdelay(SHARPSL_CHARGE_WAIT_TIME); | ||
703 | sharpsl_pm.machinfo->charge(1); | ||
704 | return 1; | ||
705 | } | ||
706 | } | ||
707 | } | ||
708 | |||
709 | dev_dbg(sharpsl_pm.dev, "Offline Charger: Step 3\n"); | ||
710 | |||
711 | mdelay(SHARPSL_CHARGE_CO_CHECK_TIME); | ||
712 | |||
713 | time = RCNR; | ||
714 | while(1) { | ||
715 | /* Check if any wakeup event had occured */ | ||
716 | if (sharpsl_pm.machinfo->charger_wakeup() != 0) | ||
717 | return 0; | ||
718 | /* Check for timeout */ | ||
719 | if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) { | ||
720 | if (sharpsl_pm.full_count > SHARPSL_CHARGE_RETRY_CNT) { | ||
721 | dev_dbg(sharpsl_pm.dev, "Offline Charger: Not charged sufficiently. Retrying.\n"); | ||
722 | sharpsl_pm.full_count = 0; | ||
723 | } | ||
724 | sharpsl_pm.full_count++; | ||
725 | return 1; | ||
726 | } | ||
727 | if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { | ||
728 | dev_dbg(sharpsl_pm.dev, "Offline Charger: Charging complete.\n"); | ||
729 | sharpsl_pm_led(SHARPSL_LED_OFF); | ||
730 | sharpsl_pm.machinfo->charge(0); | ||
731 | sharpsl_pm.charge_mode = CHRG_DONE; | ||
732 | return 1; | ||
733 | } | ||
734 | } | ||
735 | } | ||
736 | |||
737 | |||
738 | static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf) | ||
739 | { | ||
740 | return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent); | ||
741 | } | ||
742 | |||
743 | static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf) | ||
744 | { | ||
745 | return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage); | ||
746 | } | ||
747 | |||
748 | static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL); | ||
749 | static DEVICE_ATTR(battery_voltage, 0444, battery_voltage_show, NULL); | ||
750 | |||
751 | extern void (*apm_get_power_status)(struct apm_power_info *); | ||
752 | |||
753 | static void sharpsl_apm_get_power_status(struct apm_power_info *info) | ||
754 | { | ||
755 | info->ac_line_status = sharpsl_pm.battstat.ac_status; | ||
756 | |||
757 | if (sharpsl_pm.charge_mode == CHRG_ON) | ||
758 | info->battery_status = APM_BATTERY_STATUS_CHARGING; | ||
759 | else | ||
760 | info->battery_status = sharpsl_pm.battstat.mainbat_status; | ||
761 | |||
762 | info->battery_flag = (1 << info->battery_status); | ||
763 | info->battery_life = sharpsl_pm.battstat.mainbat_percent; | ||
764 | } | ||
765 | |||
766 | static struct pm_ops sharpsl_pm_ops = { | ||
767 | .pm_disk_mode = PM_DISK_FIRMWARE, | ||
768 | .prepare = pxa_pm_prepare, | ||
769 | .enter = corgi_pxa_pm_enter, | ||
770 | .finish = pxa_pm_finish, | ||
771 | }; | ||
772 | |||
773 | static int __init sharpsl_pm_probe(struct platform_device *pdev) | ||
774 | { | ||
775 | if (!pdev->dev.platform_data) | ||
776 | return -EINVAL; | ||
777 | |||
778 | sharpsl_pm.dev = &pdev->dev; | ||
779 | sharpsl_pm.machinfo = pdev->dev.platform_data; | ||
780 | sharpsl_pm.charge_mode = CHRG_OFF; | ||
781 | sharpsl_pm.flags = 0; | ||
782 | |||
783 | init_timer(&sharpsl_pm.ac_timer); | ||
784 | sharpsl_pm.ac_timer.function = sharpsl_ac_timer; | ||
785 | |||
786 | init_timer(&sharpsl_pm.chrg_full_timer); | ||
787 | sharpsl_pm.chrg_full_timer.function = sharpsl_chrg_full_timer; | ||
788 | |||
789 | sharpsl_pm.machinfo->init(); | ||
790 | |||
791 | device_create_file(&pdev->dev, &dev_attr_battery_percentage); | ||
792 | device_create_file(&pdev->dev, &dev_attr_battery_voltage); | ||
793 | |||
794 | apm_get_power_status = sharpsl_apm_get_power_status; | ||
795 | |||
796 | pm_set_ops(&sharpsl_pm_ops); | ||
797 | |||
798 | mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250)); | ||
799 | |||
800 | return 0; | ||
801 | } | ||
802 | |||
803 | static int sharpsl_pm_remove(struct platform_device *pdev) | ||
804 | { | ||
805 | pm_set_ops(NULL); | ||
806 | |||
807 | device_remove_file(&pdev->dev, &dev_attr_battery_percentage); | ||
808 | device_remove_file(&pdev->dev, &dev_attr_battery_voltage); | ||
809 | |||
810 | sharpsl_pm.machinfo->exit(); | ||
811 | |||
812 | del_timer_sync(&sharpsl_pm.chrg_full_timer); | ||
813 | del_timer_sync(&sharpsl_pm.ac_timer); | ||
814 | |||
815 | return 0; | ||
816 | } | ||
817 | |||
818 | static struct platform_driver sharpsl_pm_driver = { | ||
819 | .probe = sharpsl_pm_probe, | ||
820 | .remove = sharpsl_pm_remove, | ||
821 | .suspend = sharpsl_pm_suspend, | ||
822 | .resume = sharpsl_pm_resume, | ||
823 | .driver = { | ||
824 | .name = "sharpsl-pm", | ||
825 | }, | ||
826 | }; | ||
827 | |||
828 | static int __devinit sharpsl_pm_init(void) | ||
829 | { | ||
830 | return platform_driver_register(&sharpsl_pm_driver); | ||
831 | } | ||
832 | |||
833 | static void sharpsl_pm_exit(void) | ||
834 | { | ||
835 | platform_driver_unregister(&sharpsl_pm_driver); | ||
836 | } | ||
837 | |||
838 | late_initcall(sharpsl_pm_init); | ||
839 | module_exit(sharpsl_pm_exit); | ||