aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3517.dts11
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3530.dts11
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3730.dts24
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x.dtsi39
-rw-r--r--arch/arm/boot/dts/omap3-sb-t35.dtsi49
-rw-r--r--arch/arm/boot/dts/omap3-sbc-t3517.dts14
-rw-r--r--arch/arm/boot/dts/omap3-sbc-t3530.dts14
-rw-r--r--arch/arm/boot/dts/omap3-sbc-t3730.dts14
8 files changed, 176 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index d00502f4fd9b..0ab748cf7749 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -134,3 +134,14 @@
134 bus-width = <4>; 134 bus-width = <4>;
135 cap-power-off-card; 135 cap-power-off-card;
136}; 136};
137
138&dss {
139 status = "ok";
140
141 pinctrl-names = "default";
142 pinctrl-0 = <
143 &dss_dpi_pins_common
144 &dss_dpi_pins_cm_t35x
145 >;
146};
147
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
index d1458496520e..8dd14fcf6825 100644
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -46,3 +46,14 @@
46 bus-width = <4>; 46 bus-width = <4>;
47 cap-power-off-card; 47 cap-power-off-card;
48}; 48};
49
50&dss {
51 status = "ok";
52
53 pinctrl-names = "default";
54 pinctrl-0 = <
55 &dss_dpi_pins_common
56 &dss_dpi_pins_cm_t35x
57 >;
58};
59
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index b3f9a50b3bc8..46eadb21b5ef 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -31,6 +31,19 @@
31 }; 31 };
32}; 32};
33 33
34&omap3_pmx_wkup {
35 dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
36 pinctrl-single,pins = <
37 OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
38 OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
39 OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
40 OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
41 OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
42 OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
43 >;
44 };
45};
46
34&omap3_pmx_core { 47&omap3_pmx_core {
35 48
36 mmc2_pins: pinmux_mmc2_pins { 49 mmc2_pins: pinmux_mmc2_pins {
@@ -61,3 +74,14 @@
61 bus-width = <4>; 74 bus-width = <4>;
62 cap-power-off-card; 75 cap-power-off-card;
63}; 76};
77
78&dss {
79 status = "ok";
80
81 pinctrl-names = "default";
82 pinctrl-0 = <
83 &dss_dpi_pins_common
84 &dss_dpi_pins_cm_t3730
85 >;
86};
87
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index c671a2299ea8..b074673703bf 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -76,6 +76,45 @@
76 OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */ 76 OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
77 >; 77 >;
78 }; 78 };
79
80 dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
81 pinctrl-single,pins = <
82 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
83 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
84 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
85 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
86
87 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
88 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
89 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
90 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
91 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
92 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
93 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
94 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
95 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
96 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
97 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
98 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
99 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
100 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
101 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
102 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
103 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
104 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
105 >;
106 };
107
108 dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
109 pinctrl-single,pins = <
110 OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
111 OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
112 OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
113 OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
114 OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
115 OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
116 >;
117 };
79}; 118};
80 119
81&uart3 { 120&uart3 {
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index 28e16a6ce4bd..b1cb5774f49a 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -2,6 +2,49 @@
2 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730 2 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
3 */ 3 */
4 4
5/ {
6 tfp410: encoder@0 {
7 compatible = "ti,tfp410";
8
9 powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
10
11 pinctrl-names = "default";
12 pinctrl-0 = <&tfp410_pins>;
13
14 ports {
15 #address-cells = <1>;
16 #size-cells = <0>;
17
18 port@0 {
19 reg = <0>;
20
21 tfp410_in: endpoint@0 {
22 remote-endpoint = <&dpi_out>;
23 };
24 };
25
26 port@1 {
27 reg = <1>;
28
29 tfp410_out: endpoint@0 {
30 remote-endpoint = <&dvi_connector_in>;
31 };
32 };
33 };
34 };
35
36 dvi0: connector@0 {
37 compatible = "dvi-connector";
38 label = "dvi";
39
40 port {
41 dvi_connector_in: endpoint {
42 remote-endpoint = <&tfp410_out>;
43 };
44 };
45 };
46};
47
5&omap3_pmx_core { 48&omap3_pmx_core {
6 smsc2_pins: pinmux_smsc2_pins { 49 smsc2_pins: pinmux_smsc2_pins {
7 pinctrl-single,pins = < 50 pinctrl-single,pins = <
@@ -9,6 +52,12 @@
9 OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */ 52 OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
10 >; 53 >;
11 }; 54 };
55
56 tfp410_pins: pinmux_tfp410_pins {
57 pinctrl-single,pins = <
58 OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
59 >;
60 };
12}; 61};
13 62
14&gpmc { 63&gpmc {
diff --git a/arch/arm/boot/dts/omap3-sbc-t3517.dts b/arch/arm/boot/dts/omap3-sbc-t3517.dts
index 42189b65d393..4ec5d8684122 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3517.dts
@@ -9,6 +9,10 @@
9 model = "CompuLab SBC-T3517 with CM-T3517"; 9 model = "CompuLab SBC-T3517 with CM-T3517";
10 compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3"; 10 compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
11 11
12 aliases {
13 display0 = &dvi0;
14 };
15
12 /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */ 16 /* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
13 vddvario: regulator-vddvario-sb-t35 { 17 vddvario: regulator-vddvario-sb-t35 {
14 compatible = "regulator-fixed"; 18 compatible = "regulator-fixed";
@@ -54,3 +58,13 @@
54 wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */ 58 wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
55 cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */ 59 cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
56}; 60};
61
62&dss {
63 port {
64 dpi_out: endpoint {
65 remote-endpoint = <&tfp410_in>;
66 data-lines = <24>;
67 };
68 };
69};
70
diff --git a/arch/arm/boot/dts/omap3-sbc-t3530.dts b/arch/arm/boot/dts/omap3-sbc-t3530.dts
index bbbeea6b1988..8dfc1df8cc17 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3530.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3530.dts
@@ -8,6 +8,10 @@
8/ { 8/ {
9 model = "CompuLab SBC-T3530 with CM-T3530"; 9 model = "CompuLab SBC-T3530 with CM-T3530";
10 compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3"; 10 compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
11
12 aliases {
13 display0 = &dvi0;
14 };
11}; 15};
12 16
13&omap3_pmx_core { 17&omap3_pmx_core {
@@ -34,3 +38,13 @@
34&mmc1 { 38&mmc1 {
35 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; 39 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
36}; 40};
41
42&dss {
43 port {
44 dpi_out: endpoint {
45 remote-endpoint = <&tfp410_in>;
46 data-lines = <24>;
47 };
48 };
49};
50
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index 08e4a7086f22..6b69864bd6ce 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -8,6 +8,10 @@
8/ { 8/ {
9 model = "CompuLab SBC-T3730 with CM-T3730"; 9 model = "CompuLab SBC-T3730 with CM-T3730";
10 compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3"; 10 compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
11
12 aliases {
13 display0 = &dvi0;
14 };
11}; 15};
12 16
13&omap3_pmx_core { 17&omap3_pmx_core {
@@ -25,3 +29,13 @@
25 ranges = <5 0 0x2c000000 0x01000000>, 29 ranges = <5 0 0x2c000000 0x01000000>,
26 <4 0 0x2d000000 0x01000000>; 30 <4 0 0x2d000000 0x01000000>;
27}; 31};
32
33&dss {
34 port {
35 dpi_out: endpoint {
36 remote-endpoint = <&tfp410_in>;
37 data-lines = <24>;
38 };
39 };
40};
41