aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/dts/Makefile2
-rw-r--r--arch/arm/boot/dts/omap2.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts40
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts40
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3730.dts104
-rw-r--r--arch/arm/boot/dts/omap3-cm-t3x30.dtsi95
-rw-r--r--arch/arm/boot/dts/omap3-igep.dtsi2
-rw-r--r--arch/arm/boot/dts/omap3-igep0020.dts52
-rw-r--r--arch/arm/boot/dts/omap3-igep0030.dts10
-rw-r--r--arch/arm/boot/dts/omap3-sb-t35.dtsi40
-rw-r--r--arch/arm/boot/dts/omap3-sbc-t3730.dts30
-rw-r--r--arch/arm/boot/dts/omap3-zoom3.dts23
-rw-r--r--arch/arm/boot/dts/omap3.dtsi2
-rw-r--r--arch/arm/boot/dts/omap34xx.dtsi13
-rw-r--r--arch/arm/boot/dts/omap36xx.dtsi11
15 files changed, 399 insertions, 67 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6f527e1faeb6..8cafefa44a7e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -180,6 +180,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
180 omap2420-n810-wimax.dtb \ 180 omap2420-n810-wimax.dtb \
181 omap3430-sdp.dtb \ 181 omap3430-sdp.dtb \
182 omap3-beagle.dtb \ 182 omap3-beagle.dtb \
183 omap3-cm-t3730.dtb \
184 omap3-sbc-t3730.dtb \
183 omap3-devkit8000.dtb \ 185 omap3-devkit8000.dtb \
184 omap3-beagle-xm.dtb \ 186 omap3-beagle-xm.dtb \
185 omap3-evm.dtb \ 187 omap3-evm.dtb \
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index d0c5b37e248c..5377ddf83bf8 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -145,7 +145,7 @@
145 compatible = "ti,omap2-rng"; 145 compatible = "ti,omap2-rng";
146 ti,hwmods = "rng"; 146 ti,hwmods = "rng";
147 reg = <0x480a0000 0x50>; 147 reg = <0x480a0000 0x50>;
148 interrupts = <36>; 148 interrupts = <52>;
149 }; 149 };
150 150
151 sham: sham@480a4000 { 151 sham: sham@480a4000 {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index df33a50bc070..447e714d435b 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -99,7 +99,7 @@
99&omap3_pmx_core { 99&omap3_pmx_core {
100 pinctrl-names = "default"; 100 pinctrl-names = "default";
101 pinctrl-0 = < 101 pinctrl-0 = <
102 &hsusbb2_pins 102 &hsusb2_pins
103 >; 103 >;
104 104
105 uart3_pins: pinmux_uart3_pins { 105 uart3_pins: pinmux_uart3_pins {
@@ -109,20 +109,32 @@
109 >; 109 >;
110 }; 110 };
111 111
112 hsusbb2_pins: pinmux_hsusbb2_pins { 112 hsusb2_pins: pinmux_hsusb2_pins {
113 pinctrl-single,pins = < 113 pinctrl-single,pins = <
114 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ 114 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
115 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ 115 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
116 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ 116 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
117 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ 117 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
118 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ 118 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
119 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ 119 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
120 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ 120 >;
121 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ 121 };
122 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ 122};
123 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ 123
124 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ 124&omap3_pmx_core2 {
125 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ 125 pinctrl-names = "default";
126 pinctrl-0 = <
127 &hsusb2_2_pins
128 >;
129
130 hsusb2_2_pins: pinmux_hsusb2_2_pins {
131 pinctrl-single,pins = <
132 OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
133 OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
134 OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
135 OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
136 OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
137 OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
126 >; 138 >;
127 }; 139 };
128}; 140};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ba4a625ea5b..5053766d369b 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -93,23 +93,17 @@
93&omap3_pmx_core { 93&omap3_pmx_core {
94 pinctrl-names = "default"; 94 pinctrl-names = "default";
95 pinctrl-0 = < 95 pinctrl-0 = <
96 &hsusbb2_pins 96 &hsusb2_pins
97 >; 97 >;
98 98
99 hsusbb2_pins: pinmux_hsusbb2_pins { 99 hsusb2_pins: pinmux_hsusb2_pins {
100 pinctrl-single,pins = < 100 pinctrl-single,pins = <
101 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ 101 OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
102 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ 102 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
103 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ 103 OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
104 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ 104 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
105 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ 105 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
106 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ 106 OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
107 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
108 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
109 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
110 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
111 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
112 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
113 >; 107 >;
114 }; 108 };
115 109
@@ -121,6 +115,24 @@
121 }; 115 };
122}; 116};
123 117
118&omap3_pmx_core2 {
119 pinctrl-names = "default";
120 pinctrl-0 = <
121 &hsusb2_2_pins
122 >;
123
124 hsusb2_2_pins: pinmux_hsusb2_2_pins {
125 pinctrl-single,pins = <
126 OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
127 OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
128 OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
129 OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
130 OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
131 OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
132 >;
133 };
134};
135
124&i2c1 { 136&i2c1 {
125 clock-frequency = <2600000>; 137 clock-frequency = <2600000>;
126 138
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
new file mode 100644
index 000000000000..486f4d6c4219
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -0,0 +1,104 @@
1/*
2 * Support for CompuLab CM-T3730
3 */
4/dts-v1/;
5
6#include "omap36xx.dtsi"
7#include "omap3-cm-t3x30.dtsi"
8
9/ {
10 model = "CompuLab CM-T3730";
11 compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
12
13 wl12xx_vmmc2: wl12xx_vmmc2 {
14 compatible = "regulator-fixed";
15 regulator-name = "vw1271";
16 pinctrl-names = "default";
17 pinctrl-0 = <&wl12xx_gpio>;
18 regulator-min-microvolt = <1800000>;
19 regulator-max-microvolt = <1800000>;
20 gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; /* gpio73 */
21 startup-delay-us = <20000>;
22 enable-active-high;
23 };
24
25 wl12xx_vaux2: wl12xx_vaux2 {
26 compatible = "regulator-fixed";
27 regulator-name = "vwl1271_vaux2";
28 regulator-min-microvolt = <1800000>;
29 regulator-max-microvolt = <1800000>;
30 vin-supply = <&vaux2>;
31 };
32};
33
34&omap3_pmx_core {
35 mmc1_pins: pinmux_mmc1_pins {
36 pinctrl-single,pins = <
37 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
38 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
39 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
40 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
41 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
42 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
43 >;
44 };
45
46 mmc2_pins: pinmux_mmc2_pins {
47 pinctrl-single,pins = <
48 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
49 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
50 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
51 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
52 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
53 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
54 >;
55 };
56
57 smsc1_pins: pinmux_smsc1_pins {
58 pinctrl-single,pins = <
59 0x88 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
60 0x16a (PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
61 >;
62 };
63
64 uart3_pins: pinmux_uart3_pins {
65 pinctrl-single,pins = <
66 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
67 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
68 >;
69 };
70
71 wl12xx_gpio: pinmux_wl12xx_gpio {
72 pinctrl-single,pins = <
73 0xb2 (PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
74 0x134 (PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 */
75 >;
76 };
77};
78
79&mmc1 {
80 vmmc-supply = <&vmmc1>;
81 bus-width = <4>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&mmc1_pins>;
84};
85
86&mmc2 {
87 pinctrl-names = "default";
88 pinctrl-0 = <&mmc2_pins>;
89 vmmc-supply = <&wl12xx_vmmc2>;
90 vmmc_aux-supply = <&wl12xx_vaux2>;
91 non-removable;
92 bus-width = <4>;
93 cap-power-off-card;
94};
95
96&smsc1 {
97 pinctrl-names = "default";
98 pinctrl-0 = <&smsc1_pins>;
99};
100
101&uart3 {
102 pinctrl-names = "default";
103 pinctrl-0 = <&uart3_pins>;
104};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
new file mode 100644
index 000000000000..3a9f004d8924
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -0,0 +1,95 @@
1/*
2 * Common support for CompuLab CM-T3530 and CM-T3730
3 */
4
5/ {
6 memory {
7 device_type = "memory";
8 reg = <0x80000000 0x10000000>; /* 256 MB */
9 };
10
11 cpus {
12 cpu@0 {
13 cpu0-supply = <&vcc>;
14 };
15 };
16
17 leds {
18 compatible = "gpio-leds";
19 ledb {
20 label = "cm-t35:green";
21 gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
22 linux,default-trigger = "heartbeat";
23 };
24 };
25
26 vddvario: regulator-vddvario {
27 compatible = "regulator-fixed";
28 regulator-name = "vddvario";
29 regulator-always-on;
30 };
31
32 vdd33a: regulator-vdd33a {
33 compatible = "regulator-fixed";
34 regulator-name = "vdd33a";
35 regulator-always-on;
36 };
37};
38
39&gpmc {
40 ranges = <5 0 0x2c000000 0x01000000>;
41
42 smsc1: ethernet@5,0 {
43 compatible = "smsc,lan9221", "smsc,lan9115";
44 interrupt-parent = <&gpio6>;
45 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
46 reg = <5 0 0xff>;
47 bank-width = <2>;
48 gpmc,mux-add-data;
49 gpmc,cs-on-ns = <0>;
50 gpmc,cs-rd-off-ns = <186>;
51 gpmc,cs-wr-off-ns = <186>;
52 gpmc,adv-on-ns = <12>;
53 gpmc,adv-rd-off-ns = <48>;
54 gpmc,adv-wr-off-ns = <48>;
55 gpmc,oe-on-ns = <54>;
56 gpmc,oe-off-ns = <168>;
57 gpmc,we-on-ns = <54>;
58 gpmc,we-off-ns = <168>;
59 gpmc,rd-cycle-ns = <186>;
60 gpmc,wr-cycle-ns = <186>;
61 gpmc,access-ns = <114>;
62 gpmc,page-burst-access-ns = <6>;
63 gpmc,bus-turnaround-ns = <12>;
64 gpmc,cycle2cycle-delay-ns = <18>;
65 gpmc,wr-data-mux-bus-ns = <90>;
66 gpmc,wr-access-ns = <186>;
67 gpmc,cycle2cycle-samecsen;
68 gpmc,cycle2cycle-diffcsen;
69 vddvario-supply = <&vddvario>;
70 vdd33a-supply = <&vdd33a>;
71 reg-io-width = <4>;
72 smsc,save-mac-address;
73 };
74};
75
76&i2c1 {
77 clock-frequency = <400000>;
78
79 twl: twl@48 {
80 reg = <0x48>;
81 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
82 interrupt-parent = <&intc>;
83 };
84};
85
86#include "twl4030.dtsi"
87#include "twl4030_omap3.dtsi"
88
89&i2c3 {
90 clock-frequency = <400000>;
91};
92
93&twl_gpio {
94 ti,use-leds;
95};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 165aaf7591ba..c17009323520 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -133,8 +133,6 @@
133 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ 133 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
134 >; 134 >;
135 }; 135 };
136
137 leds_pins: pinmux_leds_pins { };
138}; 136};
139 137
140&i2c1 { 138&i2c1 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 1c7e74d2d2bc..25a2b5f652fd 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -66,28 +66,10 @@
66&omap3_pmx_core { 66&omap3_pmx_core {
67 pinctrl-names = "default"; 67 pinctrl-names = "default";
68 pinctrl-0 = < 68 pinctrl-0 = <
69 &hsusbb1_pins
70 &tfp410_pins 69 &tfp410_pins
71 &dss_pins 70 &dss_pins
72 >; 71 >;
73 72
74 hsusbb1_pins: pinmux_hsusbb1_pins {
75 pinctrl-single,pins = <
76 0x5aa (PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
77 0x5a8 (PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
78 0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
79 0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
80 0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
81 0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
82 0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
83 0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
84 0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
85 0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
86 0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
87 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
88 >;
89 };
90
91 tfp410_pins: tfp410_dvi_pins { 73 tfp410_pins: tfp410_dvi_pins {
92 pinctrl-single,pins = < 74 pinctrl-single,pins = <
93 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ 75 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
@@ -128,12 +110,36 @@
128 }; 110 };
129}; 111};
130 112
131&leds_pins { 113&omap3_pmx_core2 {
132 pinctrl-single,pins = < 114 pinctrl-names = "default";
133 0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */ 115 pinctrl-0 = <
134 0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */ 116 &hsusbb1_pins
135 0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
136 >; 117 >;
118
119 hsusbb1_pins: pinmux_hsusbb1_pins {
120 pinctrl-single,pins = <
121 OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
122 OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
123 OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
124 OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
125 OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
126 OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
127 OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
128 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
129 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
130 OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
131 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
132 OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
133 >;
134 };
135
136 leds_pins: pinmux_leds_pins {
137 pinctrl-single,pins = <
138 OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
139 OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
140 OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
141 >;
142 };
137}; 143};
138 144
139&i2c3 { 145&i2c3 {
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 02a23f8a3384..145c58cfc8ac 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -46,10 +46,12 @@
46 }; 46 };
47}; 47};
48 48
49&leds_pins { 49&omap3_pmx_core2 {
50 pinctrl-single,pins = < 50 leds_pins: pinmux_leds_pins {
51 0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */ 51 pinctrl-single,pins = <
52 >; 52 OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
53 >;
54 };
53}; 55};
54 56
55&gpmc { 57&gpmc {
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
new file mode 100644
index 000000000000..b9a2fedce7ee
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -0,0 +1,40 @@
1/*
2 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
3 */
4
5&gpmc {
6 ranges = <4 0 0x2d000000 0x01000000>;
7
8 smsc2: ethernet@4,0 {
9 compatible = "smsc,lan9221", "smsc,lan9115";
10 interrupt-parent = <&gpio3>;
11 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
12 reg = <4 0 0xff>;
13 bank-width = <2>;
14 gpmc,mux-add-data;
15 gpmc,cs-on-ns = <0>;
16 gpmc,cs-rd-off-ns = <186>;
17 gpmc,cs-wr-off-ns = <186>;
18 gpmc,adv-on-ns = <12>;
19 gpmc,adv-rd-off-ns = <48>;
20 gpmc,adv-wr-off-ns = <48>;
21 gpmc,oe-on-ns = <54>;
22 gpmc,oe-off-ns = <168>;
23 gpmc,we-on-ns = <54>;
24 gpmc,we-off-ns = <168>;
25 gpmc,rd-cycle-ns = <186>;
26 gpmc,wr-cycle-ns = <186>;
27 gpmc,access-ns = <114>;
28 gpmc,page-burst-access-ns = <6>;
29 gpmc,bus-turnaround-ns = <12>;
30 gpmc,cycle2cycle-delay-ns = <18>;
31 gpmc,wr-data-mux-bus-ns = <90>;
32 gpmc,wr-access-ns = <186>;
33 gpmc,cycle2cycle-samecsen;
34 gpmc,cycle2cycle-diffcsen;
35 vddvario-supply = <&vddvario>;
36 vdd33a-supply = <&vdd33a>;
37 reg-io-width = <4>;
38 smsc,save-mac-address;
39 };
40};
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
new file mode 100644
index 000000000000..c119bd545053
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -0,0 +1,30 @@
1/*
2 * Suppport for CompuLab SBC-T3730 with CM-T3730
3 */
4
5#include "omap3-cm-t3730.dts"
6#include "omap3-sb-t35.dtsi"
7
8/ {
9 model = "CompuLab SBC-T3730 with CM-T3730";
10 compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
11};
12
13&gpmc {
14 ranges = <5 0 0x2c000000 0x01000000>,
15 <4 0 0x2d000000 0x01000000>;
16};
17
18&smsc2 {
19 pinctrl-names = "default";
20 pinctrl-0 = <&smsc2_pins>;
21};
22
23&omap3_pmx_core {
24 smsc2_pins: pinmux_smsc2_pins {
25 pinctrl-single,pins = <
26 0x86 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
27 0xa2 (PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
28 >;
29 };
30}; \ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 15eb9fe5169c..6644f516a42b 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -80,13 +80,8 @@
80 80
81 mmc3_pins: pinmux_mmc3_pins { 81 mmc3_pins: pinmux_mmc3_pins {
82 pinctrl-single,pins = < 82 pinctrl-single,pins = <
83 0x168 (PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */ 83 OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */
84 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ 84 OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
85 0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
86 0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
87 0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
88 0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
89 0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
90 >; 85 >;
91 }; 86 };
92 87
@@ -125,6 +120,18 @@
125 }; 120 };
126}; 121};
127 122
123&omap3_pmx_core2 {
124 mmc3_2_pins: pinmux_mmc3_2_pins {
125 pinctrl-single,pins = <
126 OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
127 OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
128 OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
129 OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
130 OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
131 >;
132 };
133};
134
128&omap3_pmx_wkup { 135&omap3_pmx_wkup {
129 wlan_host_wkup: pinmux_wlan_host_wkup_pins { 136 wlan_host_wkup: pinmux_wlan_host_wkup_pins {
130 pinctrl-single,pins = < 137 pinctrl-single,pins = <
@@ -187,7 +194,7 @@
187 bus-width = <4>; 194 bus-width = <4>;
188 cap-power-off-card; 195 cap-power-off-card;
189 pinctrl-names = "default"; 196 pinctrl-names = "default";
190 pinctrl-0 = <&mmc3_pins>; 197 pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
191}; 198};
192 199
193&uart1 { 200&uart1 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index daabf99d402a..427395c083f5 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -117,7 +117,7 @@
117 117
118 omap3_pmx_core: pinmux@48002030 { 118 omap3_pmx_core: pinmux@48002030 {
119 compatible = "ti,omap3-padconf", "pinctrl-single"; 119 compatible = "ti,omap3-padconf", "pinctrl-single";
120 reg = <0x48002030 0x05cc>; 120 reg = <0x48002030 0x0238>;
121 #address-cells = <1>; 121 #address-cells = <1>;
122 #size-cells = <0>; 122 #size-cells = <0>;
123 #interrupt-cells = <1>; 123 #interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 5355d6173748..77d124678c95 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -25,4 +25,17 @@
25 clock-latency = <300000>; /* From legacy driver */ 25 clock-latency = <300000>; /* From legacy driver */
26 }; 26 };
27 }; 27 };
28
29 ocp {
30 omap3_pmx_core2: pinmux@480025d8 {
31 compatible = "ti,omap3-padconf", "pinctrl-single";
32 reg = <0x480025d8 0x24>;
33 #address-cells = <1>;
34 #size-cells = <0>;
35 #interrupt-cells = <1>;
36 interrupt-controller;
37 pinctrl-single,register-width = <16>;
38 pinctrl-single,function-mask = <0xff1f>;
39 };
40 };
28}; 41};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 380c22eb468e..b7c7bd96c404 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -38,5 +38,16 @@
38 ti,hwmods = "uart4"; 38 ti,hwmods = "uart4";
39 clock-frequency = <48000000>; 39 clock-frequency = <48000000>;
40 }; 40 };
41
42 omap3_pmx_core2: pinmux@480025a0 {
43 compatible = "ti,omap3-padconf", "pinctrl-single";
44 reg = <0x480025a0 0x5c>;
45 #address-cells = <1>;
46 #size-cells = <0>;
47 #interrupt-cells = <1>;
48 interrupt-controller;
49 pinctrl-single,register-width = <16>;
50 pinctrl-single,function-mask = <0xff1f>;
51 };
41 }; 52 };
42}; 53};
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-13 19:01:31 -0500