1 files changed, 151 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
new file mode 100644
index 000000000000..a8c00ee7522a
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "ste-nomadik-stn8815.dtsi"
+/ {
+        model = "Nomadik STN8815NHK";
+        compatible = "st,nomadik-nhk-15";
+        chosen {
+                bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+        };
+        aliases {
+                stmpe-i2c0 = &stmpe0;
+                stmpe-i2c1 = &stmpe1;
+        };
+        pinctrl {
+                stmpe2401_1 {
+                        stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
+                                nhk_cfg1 {
+                                        ste,pins = "GPIO76_B20"; // IRQ line
+                                        ste,input = <0>;
+                                };
+                                nhk_cfg2 {
+                                        ste,pins = "GPIO77_B8"; // reset line
+                                        ste,output = <1>;
+                                };
+                        };
+                };
+                stmpe2401_2 {
+                        stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
+                                nhk_cfg1 {
+                                        ste,pins = "GPIO78_A8"; // IRQ line
+                                        ste,input = <0>;
+                                };
+                                nhk_cfg2 {
+                                        ste,pins = "GPIO79_C9"; // reset line
+                                        ste,output = <1>;
+                                };
+                        };
+                };
+        };
+        src@101e0000 {
+                /* These chrystal outputs are not used on this board */
+                disable-sxtalo;
+                disable-mxtalo;
+        };
+        /* This is where the interrupt is routed on the NHK-15 debug board */
+        external-bus@34000000 {
+                compatible = "simple-bus";
+                reg = <0x34000000 0x1000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges = <0 0x34000000 0x1000000>;
+                ethernet@300 {
+                        compatible = "smsc,lan91c111";
+                        reg = <0x300 0x0fd00>;
+                        reg-io-width = <2>;
+                        reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
+                        interrupt-parent = <&stmpe_gpio44>;
+                        interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+                };
+        };
+        i2c0 {
+                stmpe0: stmpe2401@43 {
+                        compatible = "st,stmpe2401";
+                        reg = <0x43>;
+                        reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
+                        interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
+                        interrupt-parent = <&gpio2>;
+                        interrupt-controller;
+                        wakeup-source;
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&stmpe2401_1_nhk_mode>;
+                        stmpe_gpio43: stmpe_gpio {
+                                compatible = "st,stmpe-gpio";
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <2>;
+                                /* Some pins in alternate functions */
+                                st,norequest-mask = <0xf0f002>;
+                        };
+                        stmpe_keypad {
+                                compatible = "st,stmpe-keypad";
+                                debounce-interval = <64>;
+                                st,scan-count = <8>;
+                                st,no-autorepeat;
+                                keypad,num-rows = <8>;
+                                keypad,num-columns = <8>;
+                                linux,keymap = <0x00020072 // Vol down
+                                                0x00030073 // Vol up
+                                                0x0100009e // Back
+                                                0x010100e3 // TV out
+                                                0x01020098 // Lock
+                                                0x0103013b // Start
+                                                0x020000a3 // Next
+                                                0x020100a4 // Play
+                                                0x020200a5 // Prev
+                                                0x02030160 // OK
+                                                0x03000069 // Left
+                                                0x0301006a // Right
+                                                0x03020067 // Up
+                                                0x0303006c>; // Down
+                        };
+                };
+                stmpe1: stmpe2401@44 {
+                        compatible = "st,stmpe2401";
+                        reg = <0x44>;
+                        reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
+                        interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
+                        interrupt-parent = <&gpio2>;
+                        interrupt-controller;
+                        wakeup-source;
+                        pinctrl-names = "default";
+                        pinctrl-0 = <&stmpe2401_2_nhk_mode>;
+                        stmpe_gpio44: stmpe_gpio {
+                                compatible = "st,stmpe-gpio";
+                                gpio-controller;
+                                #gpio-cells = <2>;
+                                interrupt-controller;
+                                #interrupt-cells = <2>;
+                        };
+                };
+        };
+        amba {
+                mmcsd: sdi@101f6000 {
+                        cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
+                        wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
+                };
+        };
+        /* Custom board node with GPIO pins to active etc */
+        usb-s8815 {
+                /* This will turn off SATA so that MMC/SD can thrive */
+                mmcsd-gpio {
+                        gpios = <&stmpe_gpio44 2 0x1>;
+                };
+        };
+};

diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts new file mode 100644 index 000000000000..a8c00ee7522a --- /dev/null +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -0,0 +1,151 @@
	1	/*
	2	* Device Tree for the ST-Ericsson Nomadik S8815 board
	3	* Produced by Calao Systems
	4	*/
	5
	6	/dts-v1/;
	7	#include <dt-bindings/interrupt-controller/irq.h>
	8	#include <dt-bindings/gpio/gpio.h>
	9	#include "ste-nomadik-stn8815.dtsi"
	10
	11	/ {
	12	model = "Nomadik STN8815NHK";
	13	compatible = "st,nomadik-nhk-15";
	14
	15	chosen {
	16	bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
	17	};
	18
	19	aliases {
	20	stmpe-i2c0 = &stmpe0;
	21	stmpe-i2c1 = &stmpe1;
	22	};
	23
	24	pinctrl {
	25	stmpe2401_1 {
	26	stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
	27	nhk_cfg1 {
	28	ste,pins = "GPIO76_B20"; // IRQ line
	29	ste,input = <0>;
	30	};
	31	nhk_cfg2 {
	32	ste,pins = "GPIO77_B8"; // reset line
	33	ste,output = <1>;
	34	};
	35	};
	36	};
	37	stmpe2401_2 {
	38	stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
	39	nhk_cfg1 {
	40	ste,pins = "GPIO78_A8"; // IRQ line
	41	ste,input = <0>;
	42	};
	43	nhk_cfg2 {
	44	ste,pins = "GPIO79_C9"; // reset line
	45	ste,output = <1>;
	46	};
	47	};
	48	};
	49	};
	50
	51	src@101e0000 {
	52	/* These chrystal outputs are not used on this board */
	53	disable-sxtalo;
	54	disable-mxtalo;
	55	};
	56
	57	/* This is where the interrupt is routed on the NHK-15 debug board */
	58	external-bus@34000000 {
	59	compatible = "simple-bus";
	60	reg = <0x34000000 0x1000000>;
	61	#address-cells = <1>;
	62	#size-cells = <1>;
	63	ranges = <0 0x34000000 0x1000000>;
	64	ethernet@300 {
	65	compatible = "smsc,lan91c111";
	66	reg = <0x300 0x0fd00>;
	67	reg-io-width = <2>;
	68	reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
	69	interrupt-parent = <&stmpe_gpio44>;
	70	interrupts = <11 IRQ_TYPE_EDGE_RISING>;
	71	};
	72	};
	73
	74	i2c0 {
	75	stmpe0: stmpe2401@43 {
	76	compatible = "st,stmpe2401";
	77	reg = <0x43>;
	78	reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
	79	interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
	80	interrupt-parent = <&gpio2>;
	81	interrupt-controller;
	82	wakeup-source;
	83	pinctrl-names = "default";
	84	pinctrl-0 = <&stmpe2401_1_nhk_mode>;
	85	stmpe_gpio43: stmpe_gpio {
	86	compatible = "st,stmpe-gpio";
	87	gpio-controller;
	88	#gpio-cells = <2>;
	89	interrupt-controller;
	90	#interrupt-cells = <2>;
	91	/* Some pins in alternate functions */
	92	st,norequest-mask = <0xf0f002>;
	93	};
	94	stmpe_keypad {
	95	compatible = "st,stmpe-keypad";
	96	debounce-interval = <64>;
	97	st,scan-count = <8>;
	98	st,no-autorepeat;
	99	keypad,num-rows = <8>;
	100	keypad,num-columns = <8>;
	101	linux,keymap = <0x00020072 // Vol down
	102	0x00030073 // Vol up
	103	0x0100009e // Back
	104	0x010100e3 // TV out
	105	0x01020098 // Lock
	106	0x0103013b // Start
	107	0x020000a3 // Next
	108	0x020100a4 // Play
	109	0x020200a5 // Prev
	110	0x02030160 // OK
	111	0x03000069 // Left
	112	0x0301006a // Right
	113	0x03020067 // Up
	114	0x0303006c>; // Down
	115	};
	116	};
	117	stmpe1: stmpe2401@44 {
	118	compatible = "st,stmpe2401";
	119	reg = <0x44>;
	120	reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
	121	interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
	122	interrupt-parent = <&gpio2>;
	123	interrupt-controller;
	124	wakeup-source;
	125	pinctrl-names = "default";
	126	pinctrl-0 = <&stmpe2401_2_nhk_mode>;
	127	stmpe_gpio44: stmpe_gpio {
	128	compatible = "st,stmpe-gpio";
	129	gpio-controller;
	130	#gpio-cells = <2>;
	131	interrupt-controller;
	132	#interrupt-cells = <2>;
	133	};
	134	};
	135	};
	136
	137	amba {
	138	mmcsd: sdi@101f6000 {
	139	cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
	140	wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
	141	};
	142	};
	143
	144	/* Custom board node with GPIO pins to active etc */
	145	usb-s8815 {
	146	/* This will turn off SATA so that MMC/SD can thrive */
	147	mmcsd-gpio {
	148	gpios = <&stmpe_gpio44 2 0x1>;
	149	};
	150	};
	151	};