1 files changed, 45 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index faa95b5b242e..814ab67c8c29 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -107,6 +107,19 @@
          */
                 clock-frequency = <19200000>;
         };
+
+        /* regulator for wl12xx on sdio5 */
+        wl12xx_vmmc: wl12xx_vmmc {
+                pinctrl-names = "default";
+                pinctrl-0 = <&wl12xx_gpio>;
+                compatible = "regulator-fixed";
+                regulator-name = "vwl1271";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                gpio = <&gpio2 11 0>;
+                startup-delay-us = <70000>;
+                enable-active-high;
+        };
 };
 
 &omap4_pmx_wkup {
@@ -235,6 +248,33 @@
                         0x1c (PIN_OUTPUT | MUX_MODE3)   /* gpio_wk8 */
                 >;
         };
+
+        /*
+         * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+         * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+         */
+        wl12xx_gpio: pinmux_wl12xx_gpio {
+                pinctrl-single,pins = <
+                        0x26 (PIN_OUTPUT | MUX_MODE3)           /* gpmc_a19.gpio_43 */
+                        0x2c (PIN_OUTPUT | MUX_MODE3)           /* gpmc_a22.gpio_46 */
+                        0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)    /* gpmc_a24.gpio_48 */
+                        0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)    /* gpmc_a25.gpio_49 */
+                >;
+        };
+
+        /* wl12xx GPIO inputs and SDIO pins */
+        wl12xx_pins: pinmux_wl12xx_pins {
+                pinctrl-single,pins = <
+                        0x38 (PIN_INPUT | MUX_MODE3)            /* gpmc_ncs2.gpio_52 */
+                        0x3a (PIN_INPUT | MUX_MODE3)            /* gpmc_ncs3.gpio_53 */
+                        0x108 (PIN_OUTPUT | MUX_MODE0)          /* sdmmc5_clk.sdmmc5_clk */
+                        0x10a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_cmd.sdmmc5_cmd */
+                        0x10c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat0.sdmmc5_dat0 */
+                        0x10e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat1.sdmmc5_dat1 */
+                        0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat2.sdmmc5_dat2 */
+                        0x112 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat3.sdmmc5_dat3 */
+                >;
+        };
 };
 
 &i2c1 {
@@ -314,8 +354,12 @@
 };
 
 &mmc5 {
-        ti,non-removable;
+        pinctrl-names = "default";
+        pinctrl-0 = <&wl12xx_pins>;
+        vmmc-supply = <&wl12xx_vmmc>;
+        non-removable;
         bus-width = <4>;
+        cap-power-off-card;
 };
 
 &emif1 {