1 files changed, 22 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c4f20bfe4cce..c2c306d13b87 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -125,6 +125,21 @@
                 >;
         };
 
+        mmc2_pins: pinmux_mmc2_pins {
+                pinctrl-single,pins = <
+                        0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk */
+                        0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd */
+                        0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0 */
+                        0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1 */
+                        0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2 */
+                        0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3 */
+                        0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat4 */
+                        0x136 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat5 */
+                        0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat6 */
+                        0x13a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat7 */
+                >;
+        };
+
         display_pins: pinmux_display_pins {
                 pinctrl-single,pins = <
                         0x0d4 (PIN_OUTPUT | MUX_MODE4)          /* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
         cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };
 
+/* most boards use vaux3, only some old versions use vmmc2 instead */
 &mmc2 {
-        status = "disabled";
+        pinctrl-names = "default";
+        pinctrl-0 = <&mmc2_pins>;
+        vmmc-supply = <&vaux3>;
+        vmmc_aux-supply = <&vsim>;
+        bus-width = <8>;
+        non-removable;
 };
 
 &mmc3 {