1 files changed, 104 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
new file mode 100644
index 000000000000..486f4d6c4219
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -0,0 +1,104 @@
+/*
+ * Support for CompuLab CM-T3730
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+        model = "CompuLab CM-T3730";
+        compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+
+        wl12xx_vmmc2: wl12xx_vmmc2 {
+                compatible = "regulator-fixed";
+                regulator-name = "vw1271";
+                pinctrl-names = "default";
+                pinctrl-0 = <&wl12xx_gpio>;
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
+                startup-delay-us = <20000>;
+                enable-active-high;
+        };
+
+        wl12xx_vaux2: wl12xx_vaux2 {
+                compatible = "regulator-fixed";
+                regulator-name = "vwl1271_vaux2";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                vin-supply = <&vaux2>;
+        };
+};
+
+&omap3_pmx_core {
+        mmc1_pins: pinmux_mmc1_pins {
+                pinctrl-single,pins = <
+                        0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
+                        0x116 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_cmd.sdmmc1_cmd */
+                        0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0.sdmmc1_dat0 */
+                        0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1.sdmmc1_dat1 */
+                        0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2.sdmmc1_dat2 */
+                        0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3.sdmmc1_dat3 */
+                >;
+        };
+
+        mmc2_pins: pinmux_mmc2_pins {
+                pinctrl-single,pins = <
+                        0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
+                        0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
+                        0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat0.sdmmc2_dat0 */
+                        0x12e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat1.sdmmc2_dat1 */
+                        0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat2.sdmmc2_dat2 */
+                        0x132 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_dat3.sdmmc2_dat3 */
+                >;
+        };
+
+        smsc1_pins: pinmux_smsc1_pins {
+                pinctrl-single,pins = <
+                        0x88 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_ncs5.gpmc_ncs5 */
+                        0x16a (PIN_INPUT_PULLUP | MUX_MODE4)    /* uart3_cts_rctx.gpio_163 */
+                >;
+        };
+
+        uart3_pins: pinmux_uart3_pins {
+                pinctrl-single,pins = <
+                        0x16e (PIN_INPUT | MUX_MODE0)           /* uart3_rx_irrx.uart3_rx_irrx */
+                        0x170 (PIN_OUTPUT | MUX_MODE0)          /* uart3_tx_irtx.uart3_tx_irtx */
+                >;
+        };
+
+        wl12xx_gpio: pinmux_wl12xx_gpio {
+                pinctrl-single,pins = <
+                        0xb2 (PIN_OUTPUT | MUX_MODE4)           /* dss_data3.gpio_73 */
+                        0x134 (PIN_INPUT | MUX_MODE4)           /* sdmmc2_dat4.gpio_136 */
+                >;
+        };
+};
+
+&mmc1 {
+        vmmc-supply = <&vmmc1>;
+        bus-width = <4>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&mmc2_pins>;
+        vmmc-supply = <&wl12xx_vmmc2>;
+        vmmc_aux-supply = <&wl12xx_vaux2>;
+        non-removable;
+        bus-width = <4>;
+        cap-power-off-card;
+};
+
+&smsc1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&smsc1_pins>;
+};
+
+&uart3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart3_pins>;
+};