1 files changed, 1 insertions, 177 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index f004913f7d80..96e4688be77c 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -12,189 +12,13 @@
 
 /dts-v1/;
 #include "imx6q.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
 
 / {
         model = "Freescale i.MX6 Quad SABRE Lite Board";
         compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-
-        memory {
-                reg = <0x10000000 0x40000000>;
-        };
-
-        regulators {
-                compatible = "simple-bus";
-
-                reg_2p5v: 2p5v {
-                        compatible = "regulator-fixed";
-                        regulator-name = "2P5V";
-                        regulator-min-microvolt = <2500000>;
-                        regulator-max-microvolt = <2500000>;
-                        regulator-always-on;
-                };
-
-                reg_3p3v: 3p3v {
-                        compatible = "regulator-fixed";
-                        regulator-name = "3P3V";
-                        regulator-min-microvolt = <3300000>;
-                        regulator-max-microvolt = <3300000>;
-                        regulator-always-on;
-                };
-
-                reg_usb_otg_vbus: usb_otg_vbus {
-                        compatible = "regulator-fixed";
-                        regulator-name = "usb_otg_vbus";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        gpio = <&gpio3 22 0>;
-                        enable-active-high;
-                };
-        };
-
-        sound {
-                compatible = "fsl,imx6q-sabrelite-sgtl5000",
-                             "fsl,imx-audio-sgtl5000";
-                model = "imx6q-sabrelite-sgtl5000";
-                ssi-controller = <&ssi1>;
-                audio-codec = <&codec>;
-                audio-routing =
-                        "MIC_IN", "Mic Jack",
-                        "Mic Jack", "Mic Bias",
-                        "Headphone Jack", "HP_OUT";
-                mux-int-port = <1>;
-                mux-ext-port = <4>;
-        };
-};
-
-&audmux {
-        status = "okay";
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_audmux_1>;
-};
-
-&ecspi1 {
-        fsl,spi-num-chipselects = <1>;
-        cs-gpios = <&gpio3 19 0>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_ecspi1_1>;
-        status = "okay";
-
-        flash: m25p80@0 {
-                compatible = "sst,sst25vf016b";
-                spi-max-frequency = <20000000>;
-                reg = <0>;
-        };
-};
-
-&fec {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_enet_1>;
-        phy-mode = "rgmii";
-        phy-reset-gpios = <&gpio3 23 0>;
-        status = "okay";
-};
-
-&i2c1 {
-        status = "okay";
-        clock-frequency = <100000>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_i2c1_1>;
-
-        codec: sgtl5000@0a {
-                compatible = "fsl,sgtl5000";
-                reg = <0x0a>;
-                clocks = <&clks 201>;
-                VDDA-supply = <&reg_2p5v>;
-                VDDIO-supply = <&reg_3p3v>;
-        };
-};
-
-&iomuxc {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_hog>;
-
-        hog {
-                pinctrl_hog: hoggrp {
-                        fsl,pins = <
-                                MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
-                                MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
-                                MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x80000000
-                                MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
-                                MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
-                                MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
-                                MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
-                                MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
-                                MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
-                        >;
-                };
-        };
-};
-
-&ldb {
-        status = "okay";
-
-        lvds-channel@0 {
-                fsl,data-mapping = "spwg";
-                fsl,data-width = <18>;
-                status = "okay";
-
-                display-timings {
-                        native-mode = <&timing0>;
-                        timing0: hsd100pxn1 {
-                                clock-frequency = <65000000>;
-                                hactive = <1024>;
-                                vactive = <768>;
-                                hback-porch = <220>;
-                                hfront-porch = <40>;
-                                vback-porch = <21>;
-                                vfront-porch = <7>;
-                                hsync-len = <60>;
-                                vsync-len = <10>;
-                        };
-                };
-        };
 };
 
 &sata {
         status = "okay";
 };
-
-&ssi1 {
-        fsl,mode = "i2s-slave";
-        status = "okay";
-};
-
-&uart2 {
-        status = "okay";
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_uart2_1>;
-};
-
-&usbh1 {
-        status = "okay";
-};
-
-&usbotg {
-        vbus-supply = <&reg_usb_otg_vbus>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usbotg_1>;
-        disable-over-current;
-        status = "okay";
-};
-
-&usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3_2>;
-        cd-gpios = <&gpio7 0 0>;
-        wp-gpios = <&gpio7 1 0>;
-        vmmc-supply = <&reg_3p3v>;
-        status = "okay";
-};
-
-&usdhc4 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc4_2>;
-        cd-gpios = <&gpio2 6 0>;
-        wp-gpios = <&gpio2 7 0>;
-        vmmc-supply = <&reg_3p3v>;
-        status = "okay";
-};