diff options
Diffstat (limited to 'arch/arm/boot/dts/imx23-olinuxino.dts')
-rw-r--r-- | arch/arm/boot/dts/imx23-olinuxino.dts | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 20912b1d8893..384d8b66f337 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts | |||
@@ -31,6 +31,22 @@ | |||
31 | bus-width = <4>; | 31 | bus-width = <4>; |
32 | status = "okay"; | 32 | status = "okay"; |
33 | }; | 33 | }; |
34 | |||
35 | pinctrl@80018000 { | ||
36 | pinctrl-names = "default"; | ||
37 | pinctrl-0 = <&hog_pins_a>; | ||
38 | |||
39 | hog_pins_a: hog@0 { | ||
40 | reg = <0>; | ||
41 | fsl,pinmux-ids = < | ||
42 | 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ | ||
43 | 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ | ||
44 | >; | ||
45 | fsl,drive-strength = <0>; | ||
46 | fsl,voltage = <1>; | ||
47 | fsl,pull-up = <0>; | ||
48 | }; | ||
49 | }; | ||
34 | }; | 50 | }; |
35 | 51 | ||
36 | apbx@80040000 { | 52 | apbx@80040000 { |
@@ -39,6 +55,47 @@ | |||
39 | pinctrl-0 = <&duart_pins_a>; | 55 | pinctrl-0 = <&duart_pins_a>; |
40 | status = "okay"; | 56 | status = "okay"; |
41 | }; | 57 | }; |
58 | |||
59 | auart0: serial@8006c000 { | ||
60 | pinctrl-names = "default"; | ||
61 | pinctrl-0 = <&auart0_2pins_a>; | ||
62 | status = "okay"; | ||
63 | }; | ||
64 | |||
65 | usbphy0: usbphy@8007c000 { | ||
66 | status = "okay"; | ||
67 | }; | ||
68 | }; | ||
69 | }; | ||
70 | |||
71 | ahb@80080000 { | ||
72 | usb0: usb@80080000 { | ||
73 | vbus-supply = <®_usb0_vbus>; | ||
74 | status = "okay"; | ||
75 | }; | ||
76 | }; | ||
77 | |||
78 | regulators { | ||
79 | compatible = "simple-bus"; | ||
80 | |||
81 | reg_usb0_vbus: usb0_vbus { | ||
82 | compatible = "regulator-fixed"; | ||
83 | regulator-name = "usb0_vbus"; | ||
84 | regulator-min-microvolt = <5000000>; | ||
85 | regulator-max-microvolt = <5000000>; | ||
86 | enable-active-high; | ||
87 | startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */ | ||
88 | gpio = <&gpio0 17 0>; | ||
89 | }; | ||
90 | }; | ||
91 | |||
92 | leds { | ||
93 | compatible = "gpio-leds"; | ||
94 | |||
95 | user { | ||
96 | label = "green"; | ||
97 | gpios = <&gpio2 1 0>; | ||
98 | linux,default-trigger = "default-on"; | ||
42 | }; | 99 | }; |
43 | }; | 100 | }; |
44 | }; | 101 | }; |