1 files changed, 273 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
new file mode 100644
index 000000000000..f449efc9825f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -0,0 +1,273 @@
+/*
+ * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        model = "Atmel AT91SAM9260 family SoC";
+        compatible = "atmel,at91sam9260";
+        interrupt-parent = <&aic>;
+
+        aliases {
+                serial0 = &dbgu;
+                serial1 = &usart0;
+                serial2 = &usart1;
+                serial3 = &usart2;
+                serial4 = &usart3;
+                serial5 = &usart4;
+                serial6 = &usart5;
+                gpio0 = &pioA;
+                gpio1 = &pioB;
+                gpio2 = &pioC;
+                tcb0 = &tcb0;
+                tcb1 = &tcb1;
+        };
+        cpus {
+                cpu@0 {
+                        compatible = "arm,arm926ejs";
+                };
+        };
+
+        memory {
+                reg = <0x20000000 0x04000000>;
+        };
+
+        ahb {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                apb {
+                        compatible = "simple-bus";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges;
+
+                        aic: interrupt-controller@fffff000 {
+                                #interrupt-cells = <2>;
+                                compatible = "atmel,at91rm9200-aic";
+                                interrupt-controller;
+                                reg = <0xfffff000 0x200>;
+                        };
+
+                        ramc0: ramc@ffffea00 {
+                                compatible = "atmel,at91sam9260-sdramc";
+                                reg = <0xffffea00 0x200>;
+                        };
+
+                        pmc: pmc@fffffc00 {
+                                compatible = "atmel,at91rm9200-pmc";
+                                reg = <0xfffffc00 0x100>;
+                        };
+
+                        rstc@fffffd00 {
+                                compatible = "atmel,at91sam9260-rstc";
+                                reg = <0xfffffd00 0x10>;
+                        };
+
+                        shdwc@fffffd10 {
+                                compatible = "atmel,at91sam9260-shdwc";
+                                reg = <0xfffffd10 0x10>;
+                        };
+
+                        pit: timer@fffffd30 {
+                                compatible = "atmel,at91sam9260-pit";
+                                reg = <0xfffffd30 0xf>;
+                                interrupts = <1 4>;
+                        };
+
+                        tcb0: timer@fffa0000 {
+                                compatible = "atmel,at91rm9200-tcb";
+                                reg = <0xfffa0000 0x100>;
+                                interrupts = <17 4 18 4 19 4>;
+                        };
+
+                        tcb1: timer@fffdc000 {
+                                compatible = "atmel,at91rm9200-tcb";
+                                reg = <0xfffdc000 0x100>;
+                                interrupts = <26 4 27 4 28 4>;
+                        };
+
+                        pioA: gpio@fffff400 {
+                                compatible = "atmel,at91rm9200-gpio";
+                                reg = <0xfffff400 0x100>;
+                                interrupts = <2 4>;
+                                #gpio-cells = <2>;
+                                gpio-controller;
+                                interrupt-controller;
+                        };
+
+                        pioB: gpio@fffff600 {
+                                compatible = "atmel,at91rm9200-gpio";
+                                reg = <0xfffff600 0x100>;
+                                interrupts = <3 4>;
+                                #gpio-cells = <2>;
+                                gpio-controller;
+                                interrupt-controller;
+                        };
+
+                        pioC: gpio@fffff800 {
+                                compatible = "atmel,at91rm9200-gpio";
+                                reg = <0xfffff800 0x100>;
+                                interrupts = <4 4>;
+                                #gpio-cells = <2>;
+                                gpio-controller;
+                                interrupt-controller;
+                        };
+
+                        dbgu: serial@fffff200 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffff200 0x200>;
+                                interrupts = <1 4>;
+                                status = "disabled";
+                        };
+
+                        usart0: serial@fffb0000 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffb0000 0x200>;
+                                interrupts = <6 4>;
+                                atmel,use-dma-rx;
+                                atmel,use-dma-tx;
+                                status = "disabled";
+                        };
+
+                        usart1: serial@fffb4000 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffb4000 0x200>;
+                                interrupts = <7 4>;
+                                atmel,use-dma-rx;
+                                atmel,use-dma-tx;
+                                status = "disabled";
+                        };
+
+                        usart2: serial@fffb8000 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffb8000 0x200>;
+                                interrupts = <8 4>;
+                                atmel,use-dma-rx;
+                                atmel,use-dma-tx;
+                                status = "disabled";
+                        };
+
+                        usart3: serial@fffd0000 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffd0000 0x200>;
+                                interrupts = <23 4>;
+                                atmel,use-dma-rx;
+                                atmel,use-dma-tx;
+                                status = "disabled";
+                        };
+
+                        usart4: serial@fffd4000 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffd4000 0x200>;
+                                interrupts = <24 4>;
+                                atmel,use-dma-rx;
+                                atmel,use-dma-tx;
+                                status = "disabled";
+                        };
+
+                        usart5: serial@fffd8000 {
+                                compatible = "atmel,at91sam9260-usart";
+                                reg = <0xfffd8000 0x200>;
+                                interrupts = <25 4>;
+                                atmel,use-dma-rx;
+                                atmel,use-dma-tx;
+                                status = "disabled";
+                        };
+
+                        macb0: ethernet@fffc4000 {
+                                compatible = "cdns,at32ap7000-macb", "cdns,macb";
+                                reg = <0xfffc4000 0x100>;
+                                interrupts = <21 4>;
+                                status = "disabled";
+                        };
+
+                        usb1: gadget@fffa4000 {
+                                compatible = "atmel,at91rm9200-udc";
+                                reg = <0xfffa4000 0x4000>;
+                                interrupts = <10 4>;
+                                status = "disabled";
+                        };
+
+                        adc0: adc@fffe0000 {
+                                compatible = "atmel,at91sam9260-adc";
+                                reg = <0xfffe0000 0x100>;
+                                interrupts = <5 4>;
+                                atmel,adc-use-external-triggers;
+                                atmel,adc-channels-used = <0xf>;
+                                atmel,adc-vref = <3300>;
+                                atmel,adc-num-channels = <4>;
+                                atmel,adc-startup-time = <15>;
+                                atmel,adc-channel-base = <0x30>;
+                                atmel,adc-drdy-mask = <0x10000>;
+                                atmel,adc-status-register = <0x1c>;
+                                atmel,adc-trigger-register = <0x04>;
+
+                                trigger@0 {
+                                        trigger-name = "timer-counter-0";
+                                        trigger-value = <0x1>;
+                                };
+                                trigger@1 {
+                                        trigger-name = "timer-counter-1";
+                                        trigger-value = <0x3>;
+                                };
+
+                                trigger@2 {
+                                        trigger-name = "timer-counter-2";
+                                        trigger-value = <0x5>;
+                                };
+
+                                trigger@3 {
+                                        trigger-name = "external";
+                                        trigger-value = <0x13>;
+                                        trigger-external;
+                                };
+                        };
+                };
+
+                nand0: nand@40000000 {
+                        compatible = "atmel,at91rm9200-nand";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x40000000 0x10000000
+                               0xffffe800 0x200
+                              >;
+                        atmel,nand-addr-offset = <21>;
+                        atmel,nand-cmd-offset = <22>;
+                        gpios = <&pioC 13 0
+                                 &pioC 14 0
+                                 0
+                                >;
+                        status = "disabled";
+                };
+
+                usb0: ohci@00500000 {
+                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                        reg = <0x00500000 0x100000>;
+                        interrupts = <20 4>;
+                        status = "disabled";
+                };
+        };
+
+        i2c@0 {
+                compatible = "i2c-gpio";
+                gpios = <&pioA 23 0 /* sda */
+                         &pioA 24 0 /* scl */
+                        >;
+                i2c-gpio,sda-open-drain;
+                i2c-gpio,scl-open-drain;
+                i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                status = "disabled";
+        };
+};