1 files changed, 185 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
new file mode 100644
index 000000000000..5576ae8786c0
--- /dev/null
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -0,0 +1,185 @@
+/*
+ * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
+ *
+ * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+/ {
+        model = "Calao QIL A9260";
+        compatible = "calao,qil-a9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+        chosen {
+                bootargs = "console=ttyS0,115200";
+        };
+
+        memory {
+                reg = <0x20000000 0x4000000>;
+        };
+
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                main_clock: clock@0 {
+                        compatible = "atmel,osc", "fixed-clock";
+                        clock-frequency = <12000000>;
+                };
+        };
+
+        ahb {
+                apb {
+                        usb1: gadget@fffa4000 {
+                                atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+                                status = "okay";
+                        };
+
+                        mmc0: mmc@fffa8000 {
+                                pinctrl-0 = <
+                                        &pinctrl_mmc0_clk
+                                        &pinctrl_mmc0_slot0_cmd_dat0
+                                        &pinctrl_mmc0_slot0_dat1_3>;
+                                status = "okay";
+                                slot@0 {
+                                        reg = <0>;
+                                        bus-width = <4>;
+                                };
+                        };
+
+                        usart0: serial@fffb0000 {
+                                pinctrl-0 =
+                                        <&pinctrl_usart0
+                                         &pinctrl_usart0_rts
+                                         &pinctrl_usart0_cts
+                                         &pinctrl_usart0_dtr_dsr
+                                         &pinctrl_usart0_dcd
+                                         &pinctrl_usart0_ri>;
+                                status = "okay";
+                        };
+
+                        usart1: serial@fffb4000 {
+                                pinctrl-0 =
+                                        <&pinctrl_usart1
+                                         &pinctrl_usart1_rts
+                                         &pinctrl_usart1_cts>;
+                                status = "okay";
+                        };
+
+                        usart2: serial@fffb8000 {
+                                pinctrl-0 =
+                                        <&pinctrl_usart2
+                                         &pinctrl_usart2_rts
+                                         &pinctrl_usart2_cts>;
+                                status = "okay";
+                        };
+
+                        macb0: ethernet@fffc4000 {
+                                phy-mode = "rmii";
+                                status = "okay";
+                        };
+
+                        spi0: spi@fffc8000 {
+                                status = "okay";
+                                cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>;
+
+                                m41t94@0 {
+                                        compatible = "st,m41t94";
+                                        reg = <0>;
+                                        spi-max-frequency = <1000000>;
+                                };
+
+                        };
+
+                        dbgu: serial@fffff200 {
+                                status = "okay";
+                        };
+
+                        shdwc@fffffd10 {
+                                atmel,wakeup-counter = <10>;
+                                atmel,wakeup-rtt-timer;
+                        };
+                };
+
+                usb0: ohci@00500000 {
+                        num-ports = <2>;
+                        status = "okay";
+                };
+
+                nand0: nand@40000000 {
+                        nand-bus-width = <8>;
+                        nand-ecc-mode = "soft";
+                        nand-on-flash-bbt;
+                        status = "okay";
+
+                        at91bootstrap@0 {
+                                label = "at91bootstrap";
+                                reg = <0x0 0x20000>;
+                        };
+
+                        barebox@20000 {
+                                label = "barebox";
+                                reg = <0x20000 0x40000>;
+                        };
+
+                        bareboxenv@60000 {
+                                label = "bareboxenv";
+                                reg = <0x60000 0x20000>;
+                        };
+
+                        bareboxenv2@80000 {
+                                label = "bareboxenv2";
+                                reg = <0x80000 0x20000>;
+                        };
+
+                        oftree@a0000 {
+                                label = "oftree";
+                                reg = <0xa0000 0x20000>;
+                        };
+
+                        kernel@c0000 {
+                                label = "kernel";
+                                reg = <0xc0000 0x400000>;
+                        };
+
+                        rootfs@4c0000 {
+                                label = "rootfs";
+                                reg = <0x4c0000 0x7800000>;
+                        };
+
+                        data@7cc0000 {
+                                label = "data";
+                                reg = <0x7cc0000 0x8340000>;
+                        };
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+
+                user_led {
+                        label = "user_led";
+                        gpios = <&pioB 21 GPIO_ACTIVE_HIGH>;
+                        linux,default-trigger = "heartbeat";
+                };
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                user_pb {
+                        label = "user_pb";
+                        gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
+                        linux,code = <28>;
+                        gpio-key,wakeup;
+                };
+        };
+
+        i2c@0 {
+                status = "okay";
+        };
+};