1 files changed, 102 insertions, 18 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 15b603cb577d..f401b92a99f5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -19,13 +19,17 @@ config ARM
         select HAVE_KPROBES if (!XIP_KERNEL)
         select HAVE_KRETPROBES if (HAVE_KPROBES)
         select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+        select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+        select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
         select HAVE_GENERIC_DMA_COHERENT
         select HAVE_KERNEL_GZIP
         select HAVE_KERNEL_LZO
         select HAVE_KERNEL_LZMA
+        select HAVE_IRQ_WORK
         select HAVE_PERF_EVENTS
         select PERF_USE_VMALLOC
         select HAVE_REGS_AND_STACK_ACCESS_API
+        select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
         help
           The ARM series is a line of low-power-consumption RISC chip designs
           licensed by ARM Ltd and targeted at embedded applications and
@@ -145,6 +149,9 @@ config ARCH_HAS_CPUFREQ
           and that the relevant menu configurations are displayed for
           it.
 
+config ARCH_HAS_CPU_IDLE_WAIT
+       def_bool y
+
 config GENERIC_HWEIGHT
         bool
         default y
@@ -271,7 +278,6 @@ config ARCH_AT91
         bool "Atmel AT91"
         select ARCH_REQUIRE_GPIOLIB
         select HAVE_CLK
-        select ARCH_USES_GETTIMEOFFSET
         help
           This enables support for systems based on the Atmel AT91RM9200,
           AT91SAM9 and AT91CAP9 processors.
@@ -511,6 +517,7 @@ config ARCH_MMP
         select GENERIC_CLOCKEVENTS
         select TICK_ONESHOT
         select PLAT_PXA
+        select SPARSE_IRQ
         help
           Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -588,6 +595,7 @@ config ARCH_PXA
         select GENERIC_CLOCKEVENTS
         select TICK_ONESHOT
         select PLAT_PXA
+        select SPARSE_IRQ
         help
           Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -679,8 +687,8 @@ config ARCH_S3C64XX
         help
           Samsung S3C64XX series based systems
 
-config ARCH_S5P6440
-        bool "Samsung S5P6440"
+config ARCH_S5P64X0
+        bool "Samsung S5P6440 S5P6450"
         select CPU_V6
         select GENERIC_GPIO
         select HAVE_CLK
@@ -689,7 +697,8 @@ config ARCH_S5P6440
         select HAVE_S3C2410_I2C
         select HAVE_S3C_RTC
         help
-          Samsung S5P6440 CPU based systems
+          Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
+          SMDK6450.
 
 config ARCH_S5P6442
         bool "Samsung S5P6442"
@@ -748,6 +757,15 @@ config ARCH_SHARK
           Support for the StrongARM based Digital DNARD machine, also known
           as "Shark" (<http://www.shark-linux.de/shark.html>).
 
+config ARCH_TCC_926
+        bool "Telechips TCC ARM926-based systems"
+        select CPU_ARM926T
+        select HAVE_CLK
+        select COMMON_CLKDEV
+        select GENERIC_CLOCKEVENTS
+        help
+          Support for Telechips TCC ARM926-based systems.
+
 config ARCH_LH7A40X
         bool "Sharp LH7A40X"
         select CPU_ARM922T
@@ -916,6 +934,8 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
+source "arch/arm/plat-tcc/Kconfig"
+
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
@@ -929,7 +949,7 @@ if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/mach-s5p6440/Kconfig"
+source "arch/arm/mach-s5p64x0/Kconfig"
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
@@ -1003,7 +1023,7 @@ endif
 
 config ARM_ERRATA_411920
         bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
-        depends on CPU_V6 && !SMP
+        depends on CPU_V6
         help
           Invalidation of the Instruction Cache operation can
           fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
@@ -1051,6 +1071,32 @@ config ARM_ERRATA_460075
           ACTLR register. Note that setting specific bits in the ACTLR register
           may not be available in non-secure mode.
 
+config ARM_ERRATA_742230
+        bool "ARM errata: DMB operation may be faulty"
+        depends on CPU_V7 && SMP
+        help
+          This option enables the workaround for the 742230 Cortex-A9
+          (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+          between two write operations may not ensure the correct visibility
+          ordering of the two writes. This workaround sets a specific bit in
+          the diagnostic register of the Cortex-A9 which causes the DMB
+          instruction to behave as a DSB, ensuring the correct behaviour of
+          the two writes.
+
+config ARM_ERRATA_742231
+        bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+        depends on CPU_V7 && SMP
+        help
+          This option enables the workaround for the 742231 Cortex-A9
+          (r2p0..r2p2) erratum. Under certain conditions, specific to the
+          Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+          accessing some data located in the same cache line, may get corrupted
+          data due to bad handling of the address hazard when the line gets
+          replaced from one of the CPUs at the same time as another CPU is
+          accessing it. This workaround sets specific bits in the diagnostic
+          register of the Cortex-A9 which reduces the linefill issuing
+          capabilities of the processor.
+
 config PL310_ERRATA_588369
         bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
         depends on CACHE_L2X0 && ARCH_OMAP4
@@ -1076,6 +1122,20 @@ config ARM_ERRATA_720789
           invalidated are not, resulting in an incoherency in the system page
           tables. The workaround changes the TLB flushing routines to invalidate
           entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+        bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+        depends on CPU_V7
+        help
+          This option enables the workaround for the 743622 Cortex-A9
+          (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+          optimisation in the Cortex-A9 Store Buffer may lead to data
+          corruption. This workaround sets a specific bit in the diagnostic
+          register of the Cortex-A9 which disables the Store Buffer
+          optimisation, preventing the defect from occurring. This has no
+          visible impact on the overall performance or power consumption of the
+          processor.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1142,13 +1202,13 @@ source "kernel/time/Kconfig"
 
 config SMP
         bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-        depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-                 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+        depends on EXPERIMENTAL
         depends on GENERIC_CLOCKEVENTS
+        depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
+                 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+                 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
         select USE_GENERIC_SMP_HELPERS
-        select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
-                 ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+        select HAVE_ARM_SCU
         help
           This enables support for systems with more than one CPU. If you have
           a system with only one CPU, like most personal computers, say N. If
@@ -1162,10 +1222,23 @@ config SMP
 
           See also <file:Documentation/i386/IO-APIC.txt>,
           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-          <http://www.linuxdoc.org/docs.html#howto>.
+          <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
           If you don't know what to do here, say N.
 
+config SMP_ON_UP
+        bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+        depends on SMP && !XIP && !THUMB2_KERNEL
+        default y
+        help
+          SMP kernels contain instructions which fail on non-SMP processors.
+          Enabling this option allows the kernel to modify itself to make
+          these instructions safe.  Disabling it allows about 1K of space
+          savings.
+
+          If you don't know what to do here, say Y.
+
 config HAVE_ARM_SCU
         bool
         depends on SMP
@@ -1216,12 +1289,9 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
         bool "Use local timer interrupts"
-        depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-                REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-                ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+        depends on SMP
         default y
-        select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
-                ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
+        select HAVE_ARM_TWD
         help
           Enable support for local timers on SMP platforms, rather then the
           legacy IPI broadcast method.  Local timers allows the system
@@ -1232,7 +1302,7 @@ source kernel/Kconfig.preempt
 
 config HZ
         int
-        default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+        default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
                 ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
         default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
         default AT91_TIMER_HZ if ARCH_AT91
@@ -1438,6 +1508,20 @@ config UACCESS_WITH_MEMCPY
           However, if the CPU data cache is using a write-allocate mode,
           this option is unlikely to provide any performance gain.
 
+config SECCOMP
+        bool
+        prompt "Enable seccomp to safely compute untrusted bytecode"
+        ---help---
+          This kernel feature is useful for number crunching applications
+          that may need to compute untrusted bytecode during their
+          execution. By using pipes or other transports made available to
+          the process as file descriptors supporting the read/write
+          syscalls, it's possible to isolate those applications in
+          their own address space using seccomp. Once seccomp is
+          enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+          and the task is only allowed to execute a few safe syscalls
+          defined by each seccomp mode.
+
 config CC_STACKPROTECTOR
         bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
         help