diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/input/appletouch.txt | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/Documentation/input/appletouch.txt b/Documentation/input/appletouch.txt new file mode 100644 index 000000000000..b48d11d0326d --- /dev/null +++ b/Documentation/input/appletouch.txt | |||
@@ -0,0 +1,84 @@ | |||
1 | Apple Touchpad Driver (appletouch) | ||
2 | ---------------------------------- | ||
3 | Copyright (C) 2005 Stelian Pop <stelian@popies.net> | ||
4 | |||
5 | appletouch is a Linux kernel driver for the USB touchpad found on post | ||
6 | February 2005 Apple Alu Powerbooks. | ||
7 | |||
8 | This driver is derived from Johannes Berg's appletrackpad driver[1], but it has | ||
9 | been improved in some areas: | ||
10 | * appletouch is a full kernel driver, no userspace program is necessary | ||
11 | * appletouch can be interfaced with the synaptics X11 driver, in order | ||
12 | to have touchpad acceleration, scrolling, etc. | ||
13 | |||
14 | Credits go to Johannes Berg for reverse-engineering the touchpad protocol, | ||
15 | Frank Arnold for further improvements, and Alex Harper for some additional | ||
16 | information about the inner workings of the touchpad sensors. | ||
17 | |||
18 | Usage: | ||
19 | ------ | ||
20 | |||
21 | In order to use the touchpad in the basic mode, compile the driver and load | ||
22 | the module. A new input device will be detected and you will be able to read | ||
23 | the mouse data from /dev/input/mice (using gpm, or X11). | ||
24 | |||
25 | In X11, you can configure the touchpad to use the synaptics X11 driver, which | ||
26 | will give additional functionalities, like acceleration, scrolling, 2 finger | ||
27 | tap for middle button mouse emulation, 3 finger tap for right button mouse | ||
28 | emulation, etc. In order to do this, make sure you're using a recent version of | ||
29 | the synaptics driver (tested with 0.14.2, available from [2]), and configure a | ||
30 | new input device in your X11 configuration file (take a look below for an | ||
31 | example). For additional configuration, see the synaptics driver documentation. | ||
32 | |||
33 | Section "InputDevice" | ||
34 | Identifier "Synaptics Touchpad" | ||
35 | Driver "synaptics" | ||
36 | Option "SendCoreEvents" "true" | ||
37 | Option "Device" "/dev/input/mice" | ||
38 | Option "Protocol" "auto-dev" | ||
39 | Option "LeftEdge" "0" | ||
40 | Option "RightEdge" "850" | ||
41 | Option "TopEdge" "0" | ||
42 | Option "BottomEdge" "645" | ||
43 | Option "MinSpeed" "0.4" | ||
44 | Option "MaxSpeed" "1" | ||
45 | Option "AccelFactor" "0.02" | ||
46 | Option "FingerLow" "0" | ||
47 | Option "FingerHigh" "30" | ||
48 | Option "MaxTapMove" "20" | ||
49 | Option "MaxTapTime" "100" | ||
50 | Option "HorizScrollDelta" "0" | ||
51 | Option "VertScrollDelta" "30" | ||
52 | Option "SHMConfig" "on" | ||
53 | EndSection | ||
54 | |||
55 | Section "ServerLayout" | ||
56 | ... | ||
57 | InputDevice "Mouse" | ||
58 | InputDevice "Synaptics Touchpad" | ||
59 | ... | ||
60 | EndSection | ||
61 | |||
62 | Fuzz problems: | ||
63 | -------------- | ||
64 | |||
65 | The touchpad sensors are very sensitive to heat, and will generate a lot of | ||
66 | noise when the temperature changes. This is especially true when you power-on | ||
67 | the laptop for the first time. | ||
68 | |||
69 | The appletouch driver tries to handle this noise and auto adapt itself, but it | ||
70 | is not perfect. If finger movements are not recognized anymore, try reloading | ||
71 | the driver. | ||
72 | |||
73 | You can activate debugging using the 'debug' module parameter. A value of 0 | ||
74 | deactivates any debugging, 1 activates tracing of invalid samples, 2 activates | ||
75 | full tracing (each sample is being traced): | ||
76 | modprobe appletouch debug=1 | ||
77 | or | ||
78 | echo "1" > /sys/module/appletouch/parameters/debug | ||
79 | |||
80 | Links: | ||
81 | ------ | ||
82 | |||
83 | [1]: http://johannes.sipsolutions.net/PowerBook/touchpad/ | ||
84 | [2]: http://web.telia.com/~u89404340/touchpad/index.html | ||