8 files changed, 140 insertions, 12 deletions

diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 44f52a4f5903..cbbd3e069945 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -60,3 +60,62 @@ Description:
                 Indicates whether the block layer should automatically
                 generate checksums for write requests bound for
                 devices that support receiving integrity metadata.
+
+What:           /sys/block/<disk>/alignment_offset
+Date:           April 2009
+Contact:        Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+                Storage devices may report a physical block size that is
+                bigger than the logical block size (for instance a drive
+                with 4KB physical sectors exposing 512-byte logical
+                blocks to the operating system).  This parameter
+                indicates how many bytes the beginning of the device is
+                offset from the disk's natural alignment.
+
+What:           /sys/block/<disk>/<partition>/alignment_offset
+Date:           April 2009
+Contact:        Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+                Storage devices may report a physical block size that is
+                bigger than the logical block size (for instance a drive
+                with 4KB physical sectors exposing 512-byte logical
+                blocks to the operating system).  This parameter
+                indicates how many bytes the beginning of the partition
+                is offset from the disk's natural alignment.
+
+What:           /sys/block/<disk>/queue/logical_block_size
+Date:           May 2009
+Contact:        Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+                This is the smallest unit the storage device can
+                address.  It is typically 512 bytes.
+
+What:           /sys/block/<disk>/queue/physical_block_size
+Date:           May 2009
+Contact:        Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+                This is the smallest unit the storage device can write
+                without resorting to read-modify-write operation.  It is
+                usually the same as the logical block size but may be
+                bigger.  One example is SATA drives with 4KB sectors
+                that expose a 512-byte logical block size to the
+                operating system.
+
+What:           /sys/block/<disk>/queue/minimum_io_size
+Date:           April 2009
+Contact:        Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+                Storage devices may report a preferred minimum I/O size,
+                which is the smallest request the device can perform
+                without incurring a read-modify-write penalty.  For disk
+                drives this is often the physical block size.  For RAID
+                arrays it is often the stripe chunk size.
+
+What:           /sys/block/<disk>/queue/optimal_io_size
+Date:           April 2009
+Contact:        Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+                Storage devices may report an optimal I/O size, which is
+                the device's preferred unit of receiving I/O.  This is
+                rarely reported for disk drives.  For RAID devices it is
+                usually the stripe width or the internal block size.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
new file mode 100644
index 000000000000..0a92a7c93a62
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -0,0 +1,33 @@
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/model
+Date:           March 2009
+Kernel Version: 2.6.30
+Contact:        iss_storagedev@hp.com
+Description:    Displays the SCSI INQUIRY page 0 model for logical drive
+                Y of controller X.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
+Date:           March 2009
+Kernel Version: 2.6.30
+Contact:        iss_storagedev@hp.com
+Description:    Displays the SCSI INQUIRY page 0 revision for logical
+                drive Y of controller X.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
+Date:           March 2009
+Kernel Version: 2.6.30
+Contact:        iss_storagedev@hp.com
+Description:    Displays the SCSI INQUIRY page 83 serial number for logical
+                drive Y of controller X.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
+Date:           March 2009
+Kernel Version: 2.6.30
+Contact:        iss_storagedev@hp.com
+Description:    Displays the SCSI INQUIRY page 0 vendor for logical drive
+                Y of controller X.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
+Date:           March 2009
+Kernel Version: 2.6.30
+Contact:        iss_storagedev@hp.com
+Description:    A symbolic link to /sys/block/cciss!cXdY
diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt
index 629c92e99783..34614b4c708e 100644
--- a/Documentation/Smack.txt
+++ b/Documentation/Smack.txt
@@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything
 other than a letter or digit, are reserved for use by the Smack development
 team. Smack labels are unstructured, case sensitive, and the only operation
 ever performed on them is comparison for equality. Smack labels cannot
-contain unprintable characters or the "/" (slash) character. Smack labels
-cannot begin with a '-', which is reserved for special options.
+contain unprintable characters, the "/" (slash), the "\" (backslash), the "'"
+(quote) and '"' (double-quote) characters.
+Smack labels cannot begin with a '-', which is reserved for special options.
 
 There are some predefined labels:
 
@@ -523,3 +524,18 @@ Smack supports some mount options:
 
 These mount options apply to all file system types.
 
+Smack auditing
+
+If you want Smack auditing of security events, you need to set CONFIG_AUDIT
+in your kernel configuration.
+By default, all denied events will be audited. You can change this behavior by
+writing a single character to the /smack/logging file :
+0 : no logging
+1 : log denied (default)
+2 : log accepted
+3 : log denied & accepted
+
+Events are logged as 'key=value' pairs, for each event you at least will get
+the subjet, the object, the rights requested, the action, the kernel function
+that triggered the event, plus other pairs depending on the type of event
+audited.
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 6fab97ea7e6b..8d2158a1c6aa 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-mapping.txt for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 
diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt
index 4dae9a3840bf..0494f78d87e4 100644
--- a/Documentation/filesystems/gfs2-glocks.txt
+++ b/Documentation/filesystems/gfs2-glocks.txt
@@ -60,7 +60,7 @@ go_lock          | Called for the first local holder of a lock
 go_unlock        | Called on the final local unlock of a lock
 go_dump          | Called to print content of object for debugfs file, or on
                  | error to dump glock to the log.
-go_type;         | The type of the glock, LM_TYPE_.....
+go_type          | The type of the glock, LM_TYPE_.....
 go_min_hold_time | The minimum hold time
 
 The minimum hold time for each lock is the time after a remote lock
diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt
index 593004b6bbab..5e3ab8f3beff 100644
--- a/Documentation/filesystems/gfs2.txt
+++ b/Documentation/filesystems/gfs2.txt
@@ -11,18 +11,15 @@ their I/O so file system consistency is maintained.  One of the nifty
 features of GFS is perfect consistency -- changes made to the file system
 on one machine show up immediately on all other machines in the cluster.
 
-GFS uses interchangable inter-node locking mechanisms.  Different lock
-modules can plug into GFS and each file system selects the appropriate
-lock module at mount time.  Lock modules include:
+GFS uses interchangable inter-node locking mechanisms, the currently
+supported mechanisms are:
 
   lock_nolock -- allows gfs to be used as a local file system
 
   lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking
   The dlm is found at linux/fs/dlm/
 
-In addition to interfacing with an external locking manager, a gfs lock
-module is responsible for interacting with external cluster management
-systems.  Lock_dlm depends on user space cluster management systems found
+Lock_dlm depends on user space cluster management systems found
 at the URL above.
 
 To use gfs as a local file system, no external clustering systems are
@@ -31,13 +28,19 @@ needed, simply:
   $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device
   $ mount -t gfs2 /dev/block_device /dir
 
-GFS2 is not on-disk compatible with previous versions of GFS.
+If you are using Fedora, you need to install the gfs2-utils package
+and, for lock_dlm, you will also need to install the cman package
+and write a cluster.conf as per the documentation.
+
+GFS2 is not on-disk compatible with previous versions of GFS, but it
+is pretty close.
 
 The following man pages can be found at the URL above:
-  gfs2_fsck     to repair a filesystem
+  fsck.gfs2     to repair a filesystem
   gfs2_grow     to expand a filesystem online
   gfs2_jadd     to add journals to a filesystem online
   gfs2_tool     to manipulate, examine and tune a filesystem
   gfs2_quota    to examine and change quota values in a filesystem
+  gfs2_convert  to convert a gfs filesystem to gfs2 in-place
   mount.gfs2    to help mount(8) mount a filesystem
   mkfs.gfs2     to make a filesystem
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 04a44cc5048a..7bcdebffdab3 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -928,6 +928,12 @@ and is between 256 and 4096 characters. It is defined in the file
                         Formt: { "sha1" | "md5" }
                         default: "sha1"
 
+        ima_tcb         [IMA]
+                        Load a policy which meets the needs of the Trusted
+                        Computing Base.  This means IMA will measure all
+                        programs exec'd, files mmap'd for exec, and all files
+                        opened for read by uid=0.
+
         in2000=         [HW,SCSI]
                         See header of drivers/scsi/in2000.c.
 
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index f11ca7979fa6..322a00bb99d9 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -32,6 +32,7 @@ show up in /proc/sys/kernel:
 - kstack_depth_to_print       [ X86 only ]
 - l2cr                        [ PPC only ]
 - modprobe                    ==> Documentation/debugging-modules.txt
+- modules_disabled
 - msgmax
 - msgmnb
 - msgmni
@@ -184,6 +185,16 @@ kernel stack.
 
 ==============================================================
 
+modules_disabled:
+
+A toggle value indicating if modules are allowed to be loaded
+in an otherwise modular kernel.  This toggle defaults to off
+(0), but can be set true (1).  Once true, modules can be
+neither loaded nor unloaded, and the toggle cannot be set back
+to false.
+
+==============================================================
+
 osrelease, ostype & version:
 
 # cat osrelease