diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/networking/mac80211_hwsim/README | 68 | ||||
-rw-r--r-- | Documentation/networking/mac80211_hwsim/hostapd.conf | 11 | ||||
-rw-r--r-- | Documentation/networking/mac80211_hwsim/wpa_supplicant.conf | 10 |
3 files changed, 89 insertions, 0 deletions
diff --git a/Documentation/networking/mac80211_hwsim/README b/Documentation/networking/mac80211_hwsim/README new file mode 100644 index 000000000000..2f6e90fcb5a7 --- /dev/null +++ b/Documentation/networking/mac80211_hwsim/README | |||
@@ -0,0 +1,68 @@ | |||
1 | mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211 | ||
2 | Copyright (c) 2008, Jouni Malinen <j@w1.fi> | ||
3 | |||
4 | This program is free software; you can redistribute it and/or modify | ||
5 | it under the terms of the GNU General Public License version 2 as | ||
6 | published by the Free Software Foundation. | ||
7 | |||
8 | |||
9 | Introduction | ||
10 | |||
11 | mac80211_hwsim is a Linux kernel module that can be used to simulate | ||
12 | arbitrary number of IEEE 802.11 radios for mac80211 on a single | ||
13 | device. It can be used to test most of the mac80211 functionality and | ||
14 | user space tools (e.g., hostapd and wpa_supplicant) in a way that | ||
15 | matches very closely with the normal case of using real WLAN | ||
16 | hardware. From the mac80211 view point, mac80211_hwsim is yet another | ||
17 | hardware driver, i.e., no changes to mac80211 are needed to use this | ||
18 | testing tool. | ||
19 | |||
20 | The main goal for mac80211_hwsim is to make it easier for developers | ||
21 | to test their code and work with new features to mac80211, hostapd, | ||
22 | and wpa_supplicant. The simulated radios do not have the limitations | ||
23 | of real hardware, so it is easy to generate an arbitrary test setup | ||
24 | and always reproduce the same setup for future tests. In addition, | ||
25 | since all radio operation is simulated, any channel can be used in | ||
26 | tests regardless of regulatory rules. | ||
27 | |||
28 | mac80211_hwsim kernel module has a parameter 'radios' that can be used | ||
29 | to select how many radios are simulates (default 2). This allows | ||
30 | configuration of both very simply setups (e.g., just a single access | ||
31 | point and a station) or large scale tests (multiple access points with | ||
32 | hundreds of stations). | ||
33 | |||
34 | mac80211_hwsim works by tracking the current channel of each virtual | ||
35 | radio and copying all transmitted frames to all other radios that are | ||
36 | currently enabled and on the same channel as the transmitting | ||
37 | radio. Software encryption in mac80211 is used so that the frames are | ||
38 | actually encrypted over the virtual air interface to allow more | ||
39 | complete testing of encryption. | ||
40 | |||
41 | A global monitoring netdev, hwsim#, is created independent of | ||
42 | mac80211. This interface can be used to monitor all transmitted frames | ||
43 | regardless of channel. | ||
44 | |||
45 | |||
46 | Simple example | ||
47 | |||
48 | This example shows how to use mac80211_hwsim to simulate two radios: | ||
49 | one to act as an access point and the other as a station that | ||
50 | associates with the AP. hostapd and wpa_supplicant are used to take | ||
51 | care of WPA2-PSK authentication. In addition, hostapd is also | ||
52 | processing access point side of association. | ||
53 | |||
54 | Please note that the current Linux kernel does not enable AP mode, so a | ||
55 | simple patch is needed to enable AP mode selection: | ||
56 | http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch | ||
57 | |||
58 | |||
59 | # Build mac80211_hwsim as part of kernel configuration | ||
60 | |||
61 | # Load the module | ||
62 | modprobe mac80211_hwsim | ||
63 | |||
64 | # Run hostapd (AP) for wlan0 | ||
65 | hostapd hostapd.conf | ||
66 | |||
67 | # Run wpa_supplicant (station) for wlan1 | ||
68 | wpa_supplicant -Dwext -iwlan1 -c wpa_supplicant.conf | ||
diff --git a/Documentation/networking/mac80211_hwsim/hostapd.conf b/Documentation/networking/mac80211_hwsim/hostapd.conf new file mode 100644 index 000000000000..08cde7e35f2e --- /dev/null +++ b/Documentation/networking/mac80211_hwsim/hostapd.conf | |||
@@ -0,0 +1,11 @@ | |||
1 | interface=wlan0 | ||
2 | driver=nl80211 | ||
3 | |||
4 | hw_mode=g | ||
5 | channel=1 | ||
6 | ssid=mac80211 test | ||
7 | |||
8 | wpa=2 | ||
9 | wpa_key_mgmt=WPA-PSK | ||
10 | wpa_pairwise=CCMP | ||
11 | wpa_passphrase=12345678 | ||
diff --git a/Documentation/networking/mac80211_hwsim/wpa_supplicant.conf b/Documentation/networking/mac80211_hwsim/wpa_supplicant.conf new file mode 100644 index 000000000000..299128cff035 --- /dev/null +++ b/Documentation/networking/mac80211_hwsim/wpa_supplicant.conf | |||
@@ -0,0 +1,10 @@ | |||
1 | ctrl_interface=/var/run/wpa_supplicant | ||
2 | |||
3 | network={ | ||
4 | ssid="mac80211 test" | ||
5 | psk="12345678" | ||
6 | key_mgmt=WPA-PSK | ||
7 | proto=WPA2 | ||
8 | pairwise=CCMP | ||
9 | group=CCMP | ||
10 | } | ||