29 files changed, 32 insertions, 32 deletions

diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 9f08d73d90bf..e5b93510e358 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -473,7 +473,7 @@ on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI
 message as a block write to the I2C bus and waits for a response.
 This action can be detrimental to some I2C devices. It is highly recommended
 that the known I2c address be given to the SMBus driver in the smb_addr
-parameter. The default adrress range will not be used when a smb_addr
+parameter. The default address range will not be used when a smb_addr
 parameter is provided.
 
 When compiled into the kernel, the addresses can be specified on the
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 0822764ec270..8caea8c237ee 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -24,7 +24,7 @@ Headers
   header include/asm-arm/arch-s3c2410/hardware.h which can be
   included by #include <asm/arch/hardware.h>
 
-  A useful ammount of documentation can be found in the hardware
+  A useful amount of documentation can be found in the hardware
   header on how the GPIO functions (and others) work.
 
   Whilst a number of these functions do make some checks on what
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 3e46d2a31158..dda7ecdde87b 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -80,7 +80,7 @@ Machines
 Adding New Machines
 -------------------
 
-  The archicture has been designed to support as many machines as can
+  The architecture has been designed to support as many machines as can
   be configured for it in one kernel build, and any future additions
   should keep this in mind before altering items outside of their own
   machine files.
diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt
index 941343a7a265..fb18c5dc8ab4 100644
--- a/Documentation/dell_rbu.txt
+++ b/Documentation/dell_rbu.txt
@@ -4,7 +4,7 @@ for updating BIOS images on Dell servers and desktops.
 
 Scope:
 This document discusses the functionality of the rbu driver only.
-It does not cover the support needed from aplications to enable the BIOS to
+It does not cover the support needed from applications to enable the BIOS to
 update itself with the image downloaded in to the memory.
 
 Overview:
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 8c8388da868a..e00fd0c5707f 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -18,7 +18,7 @@ The EISA infrastructure is made up of three parts :
 
     - The bus code implements most of the generic code. It is shared
     among all the architectures that the EISA code runs on. It
-    implements bus probing (detecting EISA cards avaible on the bus),
+    implements bus probing (detecting EISA cards available on the bus),
     allocates I/O resources, allows fancy naming through sysfs, and
     offers interfaces for driver to register.
 
diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt
index 628d7ffa8769..f21bec8c0a25 100644
--- a/Documentation/fb/sstfb.txt
+++ b/Documentation/fb/sstfb.txt
@@ -161,7 +161,7 @@ Todo
         - Buy more coffee.
         - test/port to other arch.
         - try to add panning using tweeks with front and back buffer .
-        - try to implement accel on voodoo2 , this board can actualy do a 
+        - try to implement accel on voodoo2, this board can actually do a 
           lot in 2D even if it was sold as a 3D only board ...
 
 ghoz.
diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt
index c4ff96b7c4e0..e6e7526619bf 100644
--- a/Documentation/filesystems/configfs/configfs.txt
+++ b/Documentation/filesystems/configfs/configfs.txt
@@ -406,7 +406,7 @@ that condition is met.
 
 Far better would be an explicit action notifying the subsystem that the
 config_item is ready to go.  More importantly, an explicit action allows
-the subsystem to provide feedback as to whether the attibutes are
+the subsystem to provide feedback as to whether the attributes are
 initialized in a way that makes sense.  configfs provides this as
 committable items.
 
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 7240ee7515de..841061829d25 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -410,7 +410,7 @@ VmallocChunk:   111088 kB
               this memory, making it slower to access than lowmem.
     LowTotal:
      LowFree: Lowmem is memory which can be used for everything that
-              highmem can be used for, but it is also availble for the
+              highmem can be used for, but it is also available for the
               kernel's use for its own data structures.  Among many
               other things, it is where everything from the Slab is
               allocated.  Bad things happen when you're out of lowmem.
diff --git a/Documentation/ia64/fsys.txt b/Documentation/ia64/fsys.txt
index 28da181f9966..59dd689d9b86 100644
--- a/Documentation/ia64/fsys.txt
+++ b/Documentation/ia64/fsys.txt
@@ -165,7 +165,7 @@ complicated cases.
 * Signal handling
 
 The delivery of (asynchronous) signals must be delayed until fsys-mode
-is exited.  This is acomplished with the help of the lower-privilege
+is exited.  This is accomplished with the help of the lower-privilege
 transfer trap: arch/ia64/kernel/process.c:do_notify_resume_user()
 checks whether the interrupted task was in fsys-mode and, if so, sets
 PSR.lp and returns immediately.  When fsys-mode is exited via the
diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt
index 8fb896c74114..c16a5df2f1fa 100644
--- a/Documentation/input/atarikbd.txt
+++ b/Documentation/input/atarikbd.txt
@@ -10,7 +10,7 @@ provides a convenient connection point for a mouse and switch-type joysticks.
 The ikbd processor also maintains a time-of-day clock with one second
 resolution.
 The ikbd has been designed to be general enough that it can be used with a
-ariety of new computer products. Product variations in a number of
+variety of new computer products. Product variations in a number of
 keyswitches, mouse resolution, etc. can be accommodated.
 The ikbd communicates with the main processor over a high speed bi-directional
 serial interface. It can function in a variety of modes to facilitate
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 137e993f4329..aa21c66fbff0 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -355,9 +355,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
         clock=          [BUGS=IA-32, HW] gettimeofday clocksource override.
                         [Deprecated]
-                        Forces specified clocksource (if avaliable) to be used
+                        Forces specified clocksource (if available) to be used
                         when calculating gettimeofday(). If specified
-                        clocksource is not avalible, it defaults to PIT.
+                        clocksource is not available, it defaults to PIT.
                         Format: { pit | tsc | cyclone | pmtmr }
 
         disable_8254_timer
diff --git a/Documentation/keys.txt b/Documentation/keys.txt
index e373f0212843..57450901fc30 100644
--- a/Documentation/keys.txt
+++ b/Documentation/keys.txt
@@ -708,7 +708,7 @@ The keyctl syscall functions are:
 
      If the specified key is 0, then any assumed authority will be divested.
 
-     The assumed authorititive key is inherited across fork and exec.
+     The assumed authoritative key is inherited across fork and exec.
 
 
 ===============
diff --git a/Documentation/laptop-mode.txt b/Documentation/laptop-mode.txt
index 5696e879449b..c487186eb2b9 100644
--- a/Documentation/laptop-mode.txt
+++ b/Documentation/laptop-mode.txt
@@ -152,7 +152,7 @@ loaded on demand while the application executes) and sequentially accessed data
 DO_REMOUNTS:
 
 The control script automatically remounts any mounted journaled filesystems
-with approriate commit interval options. When this option is set to 0, this
+with appropriate commit interval options. When this option is set to 0, this
 feature is disabled.
 
 DO_REMOUNT_NOATIME:
diff --git a/Documentation/mca.txt b/Documentation/mca.txt
index 60913354cb7d..aabce4ad90f9 100644
--- a/Documentation/mca.txt
+++ b/Documentation/mca.txt
@@ -177,7 +177,7 @@ Currently, there are a number of MCA-specific device drivers.
         with clones that have a different adapter id than the original
         NE/2.
 
-6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Aapter/A and
+6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
    Reply Sound Blaster/SCSI (SCSI part)
         Better support for these cards than the driver for ISA.
    Supports multiple cards with IRQ sharing.
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 9ae9e4078985..13aa401aed69 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -175,7 +175,7 @@ All md devices contain:
      raid levels that involve striping (1,4,5,6,10). The address space
      of the array is conceptually divided into chunks and consecutive
      chunks are striped onto neighbouring devices.
-     The size should be atleast PAGE_SIZE (4k) and should be a power
+     The size should be at least PAGE_SIZE (4k) and should be a power
      of 2.  This can only be set while assembling an array
 
   component_size
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 46b9b389df35..a60f3ce474e3 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1915,7 +1915,7 @@ Whilst most CPUs do imply a data dependency barrier on the read when a memory
 access depends on a read, not all do, so it may not be relied on.
 
 Other CPUs may also have split caches, but must coordinate between the various
-cachelets for normal memory accesss.  The semantics of the Alpha removes the
+cachelets for normal memory accesses.  The semantics of the Alpha removes the
 need for coordination in absence of memory barriers.
 
 
diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt
index 867a99f88c68..0643e3b7168c 100644
--- a/Documentation/networking/3c509.txt
+++ b/Documentation/networking/3c509.txt
@@ -126,7 +126,7 @@ packets faster than they can be removed from the card. This should be rare
 or impossible in normal operation. Possible causes of this error report are:
  
    - a "green" mode enabled that slows the processor down when there is no
-     keyboard activitiy. 
+     keyboard activity. 
 
    - some other device or device driver hogging the bus or disabling interrupts.
      Check /proc/interrupts for excessive interrupt counts. The timer tick
diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt
index 76324638626b..7b231752f25b 100644
--- a/Documentation/networking/cxgb.txt
+++ b/Documentation/networking/cxgb.txt
@@ -56,7 +56,7 @@ FEATURES
 
       ethtool -C eth0 rx-usecs 100
 
-  You may also provide a timer latency value while disabling adpative-rx:
+  You may also provide a timer latency value while disabling adaptive-rx:
 
       ethtool -C <interface> adaptive-rx off rx-usecs <microseconds>
 
diff --git a/Documentation/networking/dl2k.txt b/Documentation/networking/dl2k.txt
index d460492037ef..a3a3c6e08cee 100644
--- a/Documentation/networking/dl2k.txt
+++ b/Documentation/networking/dl2k.txt
@@ -173,7 +173,7 @@ Installing the Driver
 
 Parameter Description
 =====================
-You can install this driver without any addtional parameter. However, if you
+You can install this driver without any additional parameter. However, if you
 are going to have extensive functions then it is necessary to set extra
 parameter. Below is a list of the command line parameters supported by the
 Linux device
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
index 046363552d09..b1b7499dd9d3 100644
--- a/Documentation/networking/dmfe.txt
+++ b/Documentation/networking/dmfe.txt
@@ -34,7 +34,7 @@ Next you should configure your network interface with a command similar to :
 
         ifconfig eth0 172.22.3.18
                       ^^^^^^^^^^^
-                     Your IP Adress
+                     Your IP Address
 
 Then you may have to modify the default routing table with command :
 
diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt
index 4a21d9bb836b..c9074f9b78bb 100644
--- a/Documentation/networking/operstates.txt
+++ b/Documentation/networking/operstates.txt
@@ -2,7 +2,7 @@
 1. Introduction
 
 Linux distinguishes between administrative and operational state of an
-interface. Admininstrative state is the result of "ip link set dev
+interface. Administrative state is the result of "ip link set dev
 <dev> up or down" and reflects whether the administrator wants to use
 the device for traffic.
 
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index aaf99d5f0dad..781626261e35 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -296,7 +296,7 @@ the following (from include/linux/if_packet.h):
    - struct tpacket_hdr
    - pad to TPACKET_ALIGNMENT=16
    - struct sockaddr_ll
-   - Gap, chosen so that packet data (Start+tp_net) alignes to 
+   - Gap, chosen so that packet data (Start+tp_net) aligns to 
      TPACKET_ALIGNMENT=16
    - Start+tp_mac: [ Optional MAC header ]
    - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16.
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 18d385c068fc..c2f859f7f2f0 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -7,7 +7,7 @@ Date: 041221
 
 Enable CONFIG_NET_PKTGEN to compile and build pktgen.o either in kernel
 or as module. Module is preferred. insmod pktgen if needed. Once running
-pktgen creates a thread on each CPU where each thread has affinty it's CPU.
+pktgen creates a thread on each CPU where each thread has affinity to its CPU.
 Monitoring and controlling is done via /proc. Easiest to select a suitable 
 a sample script and configure.
 
@@ -32,7 +32,7 @@ Running:
 Stopped: eth1 
 Result: OK: max_before_softirq=10000
 
-Most important the devices assigend to thread. Note! A device can only belong 
+Most important the devices assigned to thread. Note! A device can only belong 
 to one thread.
 
 
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 844c03fe7921..0bb4512e8a65 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -188,7 +188,7 @@ Bytes 0-512 ( 200 hex ) on s/390 & 0-512,4096-4544,4604-5119 currently on z/Arch
 are used by the processor itself for holding such information as exception indications & 
 entry points for exceptions.
 Bytes after 0xc00 hex are used by linux for per processor globals on s/390 & z/Architecture 
-( there is a gap on z/Architecure too currently between 0xc00 & 1000 which linux uses ).
+( there is a gap on z/Architecture too currently between 0xc00 & 1000 which linux uses ).
 The closest thing to this on traditional architectures is the interrupt
 vector table. This is a good thing & does simplify some of the kernel coding
 however it means that we now cannot catch stray NULL pointers in the
@@ -861,7 +861,7 @@ Linux source tree.
 6) rm /arch/s390/kernel/signal.o
 7) make /arch/s390/kernel/signal.o
 8) watch the gcc command line emitted
-9) type it in again or alernatively cut & paste it on the console adding the -g option.
+9) type it in again or alternatively cut & paste it on the console adding the -g option.
 10) objdump --source arch/s390/kernel/signal.o > signal.lst
 This will output the source & the assembly intermixed, as the snippet below shows
 This will unfortunately output addresses which aren't the same
diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt
index f0be389c7116..079d8868ae83 100644
--- a/Documentation/s390/cds.txt
+++ b/Documentation/s390/cds.txt
@@ -348,7 +348,7 @@ The ccw_device_start() function returns :
           not online.
 
 When the I/O request completes, the CDS first level interrupt handler will
-accumalate the status in a struct irb and then call the device interrupt handler.
+accumulate the status in a struct irb and then call the device interrupt handler.
 The intparm field will contain the value the device driver has associated with a 
 particular I/O request. If a pending device status was recognized, 
 intparm will be set to 0 (zero). This may happen during I/O initiation or delayed
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index efb674eda4d4..5295a835d55d 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -262,7 +262,7 @@ attribute 'online' which can be 0 or 1.
 -----------
 
 The netiucv driver creates an attribute 'connection' under
-bus/iucv/drivers/netiucv. Piping to this attibute creates a new netiucv
+bus/iucv/drivers/netiucv. Piping to this attribute creates a new netiucv
 connection to the specified host.
 
 Netiucv connections show up under devices/iucv/ as "netiucv<ifnum>". The interface
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 822d2aca3700..fb9281ae8faa 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -1151,7 +1151,7 @@ Driver files:
 
 New driver versions are made available separately in order to allow testing 
 changes and new features prior to including them into the linux kernel 
-distribution. The following URL provides informations on latest avalaible 
+distribution. The following URL provides information on latest available 
 patches: 
 
       ftp://ftp.tux.org/pub/people/gerard-roudier/README
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
index 5d9223bc1bd5..067ac394e0b2 100644
--- a/Documentation/scsi/ppa.txt
+++ b/Documentation/scsi/ppa.txt
@@ -3,7 +3,7 @@
 General Iomega ZIP drive page for Linux:
 http://www.torque.net/~campbell/
 
-Driver achive for old drivers:
+Driver archive for old drivers:
 http://www.torque.net/~campbell/ppa/
 
 Linux Parport page (parallel port)
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index df7a02bfb5bf..2bf3cfa3a067 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -27,7 +27,7 @@ Tekram DC390(T) adapter. This is where the name comes from: tm = Tekram
 scsi = SCSI driver, m = AMD (?) as opposed to w for the DC390W/U/F
 (NCR53c8X5, X=2/7) driver. Yes, there was also a driver for the latter,
 tmscsiw, which supported DC390W/U/F adapters. It's not maintained any more,
-as the ncr53c8xx is perfectly supporting these adpaters since some time.
+as the ncr53c8xx is perfectly supporting these adapters since some time.
 
 The driver first appeared in April 1996, exclusively supported the DC390 
 and has been enhanced since then in various steps. In May 1998 support for