146 files changed, 5961 insertions, 2205 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-qla2xxx b/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 000000000000..9a59d84497ed
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What:           /sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date:           September 2009
+Contact:        QLogic Linux Driver <linux-driver@qlogic.com>
+Description:    qla2xxx-udev.sh currently looks for uevent CHANGE events to
+                signal a firmware-dump has been generated by the driver and is
+                ready for retrieval.
+Users:          qla2xxx-udev.sh.  Proposed changes should be mailed to
+                linux-driver@qlogic.com
diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats
index 99233902e09e..f91a973a37fe 100644
--- a/Documentation/ABI/testing/procfs-diskstats
+++ b/Documentation/ABI/testing/procfs-diskstats
@@ -8,7 +8,7 @@ Description:
                  1 - major number
                  2 - minor mumber
                  3 - device name
-                 4 - reads completed succesfully
+                 4 - reads completed successfully
                  5 - reads merged
                  6 - sectors read
                  7 - time spent reading (ms)
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 5f3bedaf8e35..d2f90334bb93 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -4,7 +4,7 @@ Contact:	Jerome Marchand <jmarchan@redhat.com>
 Description:
                 The /sys/block/<disk>/stat files displays the I/O
                 statistics of disk <disk>. They contain 11 fields:
-                 1 - reads completed succesfully
+                 1 - reads completed successfully
                  2 - reads merged
                  3 - sectors read
                  4 - time spent reading (ms)
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 7772928ee48f..deb6b489e4e5 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -144,3 +144,16 @@ Description:
 
                 Write a 1 to force the device to disconnect
                 (equivalent to unplugging a wired USB device).
+
+What:           /sys/bus/usb/drivers/.../remove_id
+Date:           November 2009
+Contact:        CHENG Renquan <rqcheng@smu.edu.sg>
+Description:
+                Writing a device ID to this file will remove an ID
+                that was dynamically added via the new_id sysfs entry.
+                The format for the device ID is:
+                idVendor idProduct.     After successfully
+                removing an ID, the driver will no longer support the
+                device.  This is useful to ensure auto probing won't
+                match the driver to the device.  For example:
+                # echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 4e8106f7cfd9..25b1e751b777 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -23,3 +23,16 @@ Description:
                 Since this relates to security (specifically, the
                 lifetime of PTKs and GTKs) it should not be changed
                 from the default.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
+Date:           August 2009
+KernelVersion:  2.6.32
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The maximum PHY rate to use for all connected devices.
+                This is only of limited use for testing and
+                development as the hardware's automatic rate
+                adaptation is better then this simple control.
+
+                Refer to [ECMA-368] section 10.3.1.1 for the value to
+                use.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 9fe91c02ee40..bf1627b02a03 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -60,6 +60,19 @@ Description:
 Users:          hotplug memory remove tools
                 https://w3.opensource.ibm.com/projects/powerpc-utils/
 
+
+What:           /sys/devices/system/memoryX/nodeY
+Date:           October 2009
+Contact:        Linux Memory Management list <linux-mm@kvack.org>
+Description:
+                When CONFIG_NUMA is enabled, a symbolic link that
+                points to the corresponding NUMA node directory.
+
+                For example, the following symbolic link is created for
+                memory section 9 on node0:
+                /sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
+
 What:           /sys/devices/system/node/nodeX/memoryY
 Date:           September 2008
 Contact:        Gary Hade <garyhade@us.ibm.com>
@@ -70,4 +83,3 @@ Description:
                 memory section directory.  For example, the following symbolic
                 link is created for memory section 9 on node0.
                 /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
-
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index a703b9e9aeb9..84a710f87c64 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -62,6 +62,35 @@ Description:	CPU topology files that describe kernel limits related to
                 See Documentation/cputopology.txt for more information.
 
 
+What:           /sys/devices/system/cpu/probe
+                /sys/devices/system/cpu/release
+Date:           November 2009
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:    Dynamic addition and removal of CPU's.  This is not hotplug
+                removal, this is meant complete removal/addition of the CPU
+                from the system.
+
+                probe: writes to this file will dynamically add a CPU to the
+                system.  Information written to the file to add CPU's is
+                architecture specific.
+
+                release: writes to this file dynamically remove a CPU from
+                the system.  Information writtento the file to remove CPU's
+                is architecture specific.
+
+What:           /sys/devices/system/cpu/cpu#/node
+Date:           October 2009
+Contact:        Linux memory management mailing list <linux-mm@kvack.org>
+Description:    Discover NUMA node a CPU belongs to
+
+                When CONFIG_NUMA is enabled, a symbolic link that points
+                to the corresponding NUMA node directory.
+
+                For example, the following symlink is created for cpu42
+                in NUMA node 2:
+
+                /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
 
 What:           /sys/devices/system/cpu/cpu#/node
 Date:           October 2009
@@ -136,6 +165,24 @@ Description:	Discover cpuidle policy and mechanism
                 See files in Documentation/cpuidle/ for more information.
 
 
+What:           /sys/devices/system/cpu/cpu#/cpufreq/*
+Date:           pre-git history
+Contact:        cpufreq@vger.kernel.org
+Description:    Discover and change clock speed of CPUs
+
+                Clock scaling allows you to change the clock speed of the
+                CPUs on the fly. This is a nice method to save battery
+                power, because the lower the clock speed, the less power
+                the CPU consumes.
+
+                There are many knobs to tweak in this directory.
+
+                See files in Documentation/cpu-freq/ for more information.
+
+                In particular, read Documentation/cpu-freq/user-guide.txt
+                to learn how to control the knobs.
+
+
 What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
 Date:      August 2008
 KernelVersion:  2.6.27
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
index 6dcf75e594fb..8b093f8222d3 100644
--- a/Documentation/ABI/testing/sysfs-kernel-slab
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -45,8 +45,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The alloc_fastpath file is read-only and specifies how many
-                objects have been allocated using the fast path.
+                The alloc_fastpath file shows how many objects have been
+                allocated using the fast path.  It can be written to clear the
+                current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/alloc_from_partial
@@ -55,9 +56,10 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The alloc_from_partial file is read-only and specifies how
-                many times a cpu slab has been full and it has been refilled
-                by using a slab from the list of partially used slabs.
+                The alloc_from_partial file shows how many times a cpu slab has
+                been full and it has been refilled by using a slab from the list
+                of partially used slabs.  It can be written to clear the current
+                count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/alloc_refill
@@ -66,9 +68,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The alloc_refill file is read-only and specifies how many
-                times the per-cpu freelist was empty but there were objects
-                available as the result of remote cpu frees.
+                The alloc_refill file shows how many times the per-cpu freelist
+                was empty but there were objects available as the result of
+                remote cpu frees.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/alloc_slab
@@ -77,8 +79,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The alloc_slab file is read-only and specifies how many times
-                a new slab had to be allocated from the page allocator.
+                The alloc_slab file is shows how many times a new slab had to
+                be allocated from the page allocator.  It can be written to
+                clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/alloc_slowpath
@@ -87,9 +90,10 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The alloc_slowpath file is read-only and specifies how many
-                objects have been allocated using the slow path because of a
-                refill or allocation from a partial or new slab.
+                The alloc_slowpath file shows how many objects have been
+                allocated using the slow path because of a refill or
+                allocation from a partial or new slab.  It can be written to
+                clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/cache_dma
@@ -117,10 +121,11 @@ KernelVersion:	2.6.31
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file cpuslab_flush is read-only and specifies how many
-                times a cache's cpu slabs have been flushed as the result of
-                destroying or shrinking a cache, a cpu going offline, or as
-                the result of forcing an allocation from a certain node.
+                The file cpuslab_flush shows how many times a cache's cpu slabs
+                have been flushed as the result of destroying or shrinking a
+                cache, a cpu going offline, or as the result of forcing an
+                allocation from a certain node.  It can be written to clear the
+                current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/ctor
@@ -139,8 +144,8 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file deactivate_empty is read-only and specifies how many
-                times an empty cpu slab was deactivated.
+                The deactivate_empty file shows how many times an empty cpu slab
+                was deactivated.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/deactivate_full
@@ -149,8 +154,8 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file deactivate_full is read-only and specifies how many
-                times a full cpu slab was deactivated.
+                The deactivate_full file shows how many times a full cpu slab
+                was deactivated.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/deactivate_remote_frees
@@ -159,9 +164,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file deactivate_remote_frees is read-only and specifies how
-                many times a cpu slab has been deactivated and contained free
-                objects that were freed remotely.
+                The deactivate_remote_frees file shows how many times a cpu slab
+                has been deactivated and contained free objects that were freed
+                remotely.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/deactivate_to_head
@@ -170,9 +175,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file deactivate_to_head is read-only and specifies how
-                many times a partial cpu slab was deactivated and added to the
-                head of its node's partial list.
+                The deactivate_to_head file shows how many times a partial cpu
+                slab was deactivated and added to the head of its node's partial
+                list.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/deactivate_to_tail
@@ -181,9 +186,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file deactivate_to_tail is read-only and specifies how
-                many times a partial cpu slab was deactivated and added to the
-                tail of its node's partial list.
+                The deactivate_to_tail file shows how many times a partial cpu
+                slab was deactivated and added to the tail of its node's partial
+                list.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/destroy_by_rcu
@@ -201,9 +206,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file free_add_partial is read-only and specifies how many
-                times an object has been freed in a full slab so that it had to
-                added to its node's partial list.
+                The free_add_partial file shows how many times an object has
+                been freed in a full slab so that it had to added to its node's
+                partial list.  It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/free_calls
@@ -222,9 +227,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The free_fastpath file is read-only and specifies how many
-                objects have been freed using the fast path because it was an
-                object from the cpu slab.
+                The free_fastpath file shows how many objects have been freed
+                using the fast path because it was an object from the cpu slab.
+                It can be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/free_frozen
@@ -233,9 +238,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The free_frozen file is read-only and specifies how many
-                objects have been freed to a frozen slab (i.e. a remote cpu
-                slab).
+                The free_frozen file shows how many objects have been freed to
+                a frozen slab (i.e. a remote cpu slab).  It can be written to
+                clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/free_remove_partial
@@ -244,9 +249,10 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file free_remove_partial is read-only and specifies how
-                many times an object has been freed to a now-empty slab so
-                that it had to be removed from its node's partial list.
+                The free_remove_partial file shows how many times an object has
+                been freed to a now-empty slab so that it had to be removed from
+                its node's partial list.  It can be written to clear the current
+                count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/free_slab
@@ -255,8 +261,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The free_slab file is read-only and specifies how many times an
-                empty slab has been freed back to the page allocator.
+                The free_slab file shows how many times an empty slab has been
+                freed back to the page allocator.  It can be written to clear
+                the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/free_slowpath
@@ -265,9 +272,9 @@ KernelVersion:	2.6.25
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The free_slowpath file is read-only and specifies how many
-                objects have been freed using the slow path (i.e. to a full or
-                partial slab).
+                The free_slowpath file shows how many objects have been freed
+                using the slow path (i.e. to a full or partial slab).  It can
+                be written to clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/hwcache_align
@@ -346,10 +353,10 @@ KernelVersion:	2.6.26
 Contact:        Pekka Enberg <penberg@cs.helsinki.fi>,
                 Christoph Lameter <cl@linux-foundation.org>
 Description:
-                The file order_fallback is read-only and specifies how many
-                times an allocation of a new slab has not been possible at the
-                cache's order and instead fallen back to its minimum possible
-                order.
+                The order_fallback file shows how many times an allocation of a
+                new slab has not been possible at the cache's order and instead
+                fallen back to its minimum possible order.  It can be written to
+                clear the current count.
                 Available when CONFIG_SLUB_STATS is enabled.
 
 What:           /sys/kernel/slab/cache/partial
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index 01f24e94bdb6..ecad88d9fe59 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -214,7 +214,7 @@ most specific mask.
 Here is pseudo-code showing how this might be done:
 
         #define PLAYBACK_ADDRESS_BITS   DMA_BIT_MASK(32)
-        #define RECORD_ADDRESS_BITS     0x00ffffff
+        #define RECORD_ADDRESS_BITS     DMA_BIT_MASK(24)
 
         struct my_sound_card *card;
         struct pci_dev *pdev;
@@ -224,14 +224,14 @@ Here is pseudo-code showing how this might be done:
                 card->playback_enabled = 1;
         } else {
                 card->playback_enabled = 0;
-                printk(KERN_WARN "%s: Playback disabled due to DMA limitations.\n",
+                printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
                        card->name);
         }
         if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
                 card->record_enabled = 1;
         } else {
                 card->record_enabled = 0;
-                printk(KERN_WARN "%s: Record disabled due to DMA limitations.\n",
+                printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
                        card->name);
         }
 
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index ab8300f67182..325cfd1d6d99 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -8,7 +8,7 @@
 
 DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
             kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
-            procfs-guide.xml writing_usb_driver.xml networking.xml \
+            writing_usb_driver.xml networking.xml \
             kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
             gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
             genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
@@ -32,10 +32,10 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs media
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
-xmldocs: $(BOOKS)
+xmldocs: $(BOOKS) xmldoclinks
 sgmldocs: xmldocs
 
 PS := $(patsubst %.xml, %.ps, $(BOOKS))
@@ -45,15 +45,24 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
 pdfdocs: $(PDF)
 
 HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: media $(HTML)
+htmldocs: $(HTML)
         $(call build_main_index)
+        $(call build_images)
 
 MAN := $(patsubst %.xml, %.9, $(BOOKS))
 mandocs: $(MAN)
 
-media:
-        mkdir -p $(srctree)/Documentation/DocBook/media/
-        cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(srctree)/Documentation/DocBook/media/
+build_images = mkdir -p $(objtree)/Documentation/DocBook/media/ && \
+               cp $(srctree)/Documentation/DocBook/dvb/*.png $(srctree)/Documentation/DocBook/v4l/*.gif $(objtree)/Documentation/DocBook/media/
+
+xmldoclinks:
+ifneq ($(objtree),$(srctree))
+        for dep in dvb media-entities.tmpl media-indices.tmpl v4l; do \
+                rm -f $(objtree)/Documentation/DocBook/$$dep \
+                && ln -s $(srctree)/Documentation/DocBook/$$dep $(objtree)/Documentation/DocBook/ \
+                || exit; \
+        done
+endif
 
 installmandocs: mandocs
         mkdir -p /usr/local/man/man9/
@@ -65,7 +74,7 @@ KERNELDOC = $(srctree)/scripts/kernel-doc
 DOCPROC   = $(objtree)/scripts/basic/docproc
 
 XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl
-#XMLTOFLAGS += --skip-validation
+XMLTOFLAGS += --skip-validation
 
 ###
 # DOCPROC is used for two purposes:
@@ -101,17 +110,6 @@ endif
 # Changes in kernel-doc force a rebuild of all documentation
 $(BOOKS): $(KERNELDOC)
 
-###
-# procfs guide uses a .c file as example code.
-# This requires an explicit dependency
-C-procfs-example = procfs_example.xml
-C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
-$(obj)/procfs-guide.xml: $(C-procfs-example2)
-
-# List of programs to build
-##oops, this is a kernel module::hostprogs-y := procfs_example
-obj-m += procfs_example.o
-
 # Tell kbuild to always build the programs
 always := $(hostprogs-y)
 
@@ -238,7 +236,7 @@ clean-files := $(DOCBOOKS) \
         $(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
         $(patsubst %.xml, %.html, $(DOCBOOKS)) \
         $(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-        $(C-procfs-example) $(index)
+        $(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 94a20fe8fedf..f9a6e2c75f12 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -293,10 +293,23 @@ X!Idrivers/video/console/fonts.c
 
   <chapter id="input_subsystem">
      <title>Input Subsystem</title>
+     <sect1><title>Input core</title>
 !Iinclude/linux/input.h
 !Edrivers/input/input.c
 !Edrivers/input/ff-core.c
 !Edrivers/input/ff-memless.c
+     </sect1>
+     <sect1><title>Polled input devices</title>
+!Iinclude/linux/input-polldev.h
+!Edrivers/input/input-polldev.c
+     </sect1>
+     <sect1><title>Matrix keyboars/keypads</title>
+!Iinclude/linux/input/matrix_keypad.h
+     </sect1>
+     <sect1><title>Sparse keymap support</title>
+!Iinclude/linux/input/sparse-keymap.h
+!Edrivers/input/sparse-keymap.c
+     </sect1>
   </chapter>
 
   <chapter id="spi">
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml
index 4fc5b23470a3..63c528fee624 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/dvb/dvbapi.xml
@@ -30,6 +30,14 @@
 <revhistory>
 <!-- Put document revisions here, newest first. -->
 <revision>
+        <revnumber>2.0.2</revnumber>
+        <date>2009-10-25</date>
+        <authorinitials>mcc</authorinitials>
+        <revremark>
+                documents FE_SET_FRONTEND_TUNE_MODE and FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
+        </revremark>
+</revision>
+<revision>
 <revnumber>2.0.1</revnumber>
 <date>2009-09-16</date>
 <authorinitials>mcc</authorinitials>
@@ -85,3 +93,8 @@ Added ISDB-T test originally written by Patrick Boettcher
     &sub-examples;
   </chapter>
 <!-- END OF CHAPTERS -->
+  <appendix id="frontend_h">
+    <title>DVB Frontend Header File</title>
+    &sub-frontend-h;
+  </appendix>
+
diff --git a/Documentation/DocBook/dvb/isdbt.xml b/Documentation/DocBook/dvb/dvbproperty.xml
index 92855222fccb..5f57c7ccd4ba 100644
--- a/Documentation/DocBook/dvb/isdbt.xml
+++ b/Documentation/DocBook/dvb/dvbproperty.xml
@@ -1,3 +1,6 @@
+<section id="FE_GET_PROPERTY">
+<title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
+
 <section id="isdbt">
         <title>ISDB-T frontend</title>
         <para>This section describes shortly what are the possible parameters in the Linux
@@ -312,3 +315,4 @@
                 </section>
         </section>
 </section>
+</section>
diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml
new file mode 100644
index 000000000000..b99644f5340a
--- /dev/null
+++ b/Documentation/DocBook/dvb/frontend.h.xml
@@ -0,0 +1,415 @@
+<programlisting>
+/*
+ * frontend.h
+ *
+ * Copyright (C) 2000 Marcus Metzler &lt;marcus@convergence.de&gt;
+ *                  Ralph  Metzler &lt;ralph@convergence.de&gt;
+ *                  Holger Waechtler &lt;holger@convergence.de&gt;
+ *                  Andre Draszik &lt;ad@convergence.de&gt;
+ *                  for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBFRONTEND_H_
+#define _DVBFRONTEND_H_
+
+#include &lt;linux/types.h&gt;
+
+typedef enum fe_type {
+        FE_QPSK,
+        FE_QAM,
+        FE_OFDM,
+        FE_ATSC
+} fe_type_t;
+
+
+typedef enum fe_caps {
+        FE_IS_STUPID                    = 0,
+        FE_CAN_INVERSION_AUTO           = 0x1,
+        FE_CAN_FEC_1_2                  = 0x2,
+        FE_CAN_FEC_2_3                  = 0x4,
+        FE_CAN_FEC_3_4                  = 0x8,
+        FE_CAN_FEC_4_5                  = 0x10,
+        FE_CAN_FEC_5_6                  = 0x20,
+        FE_CAN_FEC_6_7                  = 0x40,
+        FE_CAN_FEC_7_8                  = 0x80,
+        FE_CAN_FEC_8_9                  = 0x100,
+        FE_CAN_FEC_AUTO                 = 0x200,
+        FE_CAN_QPSK                     = 0x400,
+        FE_CAN_QAM_16                   = 0x800,
+        FE_CAN_QAM_32                   = 0x1000,
+        FE_CAN_QAM_64                   = 0x2000,
+        FE_CAN_QAM_128                  = 0x4000,
+        FE_CAN_QAM_256                  = 0x8000,
+        FE_CAN_QAM_AUTO                 = 0x10000,
+        FE_CAN_TRANSMISSION_MODE_AUTO   = 0x20000,
+        FE_CAN_BANDWIDTH_AUTO           = 0x40000,
+        FE_CAN_GUARD_INTERVAL_AUTO      = 0x80000,
+        FE_CAN_HIERARCHY_AUTO           = 0x100000,
+        FE_CAN_8VSB                     = 0x200000,
+        FE_CAN_16VSB                    = 0x400000,
+        FE_HAS_EXTENDED_CAPS            = 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
+        FE_CAN_2G_MODULATION            = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
+        FE_NEEDS_BENDING                = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
+        FE_CAN_RECOVER                  = 0x40000000, /* frontend can recover from a cable unplug automatically */
+        FE_CAN_MUTE_TS                  = 0x80000000  /* frontend can stop spurious TS data output */
+} fe_caps_t;
+
+
+struct dvb_frontend_info {
+        char       name[128];
+        fe_type_t  type;
+        __u32      frequency_min;
+        __u32      frequency_max;
+        __u32      frequency_stepsize;
+        __u32      frequency_tolerance;
+        __u32      symbol_rate_min;
+        __u32      symbol_rate_max;
+        __u32      symbol_rate_tolerance;       /* ppm */
+        __u32      notifier_delay;              /* DEPRECATED */
+        fe_caps_t  caps;
+};
+
+
+/**
+ *  Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ *  the meaning of this struct...
+ */
+struct dvb_diseqc_master_cmd {
+        __u8 msg [6];   /*  { framing, address, command, data [3] } */
+        __u8 msg_len;   /*  valid values are 3...6  */
+};
+
+
+struct dvb_diseqc_slave_reply {
+        __u8 msg [4];   /*  { framing, data [3] } */
+        __u8 msg_len;   /*  valid values are 0...4, 0 means no msg  */
+        int  timeout;   /*  return from ioctl after timeout ms with */
+};                      /*  errorcode when no message was received  */
+
+
+typedef enum fe_sec_voltage {
+        SEC_VOLTAGE_13,
+        SEC_VOLTAGE_18,
+        SEC_VOLTAGE_OFF
+} fe_sec_voltage_t;
+
+
+typedef enum fe_sec_tone_mode {
+        SEC_TONE_ON,
+        SEC_TONE_OFF
+} fe_sec_tone_mode_t;
+
+
+typedef enum fe_sec_mini_cmd {
+        SEC_MINI_A,
+        SEC_MINI_B
+} fe_sec_mini_cmd_t;
+
+
+typedef enum fe_status {
+        FE_HAS_SIGNAL   = 0x01,   /* found something above the noise level */
+        FE_HAS_CARRIER  = 0x02,   /* found a DVB signal  */
+        FE_HAS_VITERBI  = 0x04,   /* FEC is stable  */
+        FE_HAS_SYNC     = 0x08,   /* found sync bytes  */
+        FE_HAS_LOCK     = 0x10,   /* everything's working... */
+        FE_TIMEDOUT     = 0x20,   /* no lock within the last ~2 seconds */
+        FE_REINIT       = 0x40    /* frontend was reinitialized,  */
+} fe_status_t;                    /* application is recommended to reset */
+                                  /* DiSEqC, tone and parameters */
+
+typedef enum fe_spectral_inversion {
+        INVERSION_OFF,
+        INVERSION_ON,
+        INVERSION_AUTO
+} fe_spectral_inversion_t;
+
+
+typedef enum fe_code_rate {
+        FEC_NONE = 0,
+        FEC_1_2,
+        FEC_2_3,
+        FEC_3_4,
+        FEC_4_5,
+        FEC_5_6,
+        FEC_6_7,
+        FEC_7_8,
+        FEC_8_9,
+        FEC_AUTO,
+        FEC_3_5,
+        FEC_9_10,
+} fe_code_rate_t;
+
+
+typedef enum fe_modulation {
+        QPSK,
+        QAM_16,
+        QAM_32,
+        QAM_64,
+        QAM_128,
+        QAM_256,
+        QAM_AUTO,
+        VSB_8,
+        VSB_16,
+        PSK_8,
+        APSK_16,
+        APSK_32,
+        DQPSK,
+} fe_modulation_t;
+
+typedef enum fe_transmit_mode {
+        TRANSMISSION_MODE_2K,
+        TRANSMISSION_MODE_8K,
+        TRANSMISSION_MODE_AUTO,
+        TRANSMISSION_MODE_4K
+} fe_transmit_mode_t;
+
+typedef enum fe_bandwidth {
+        BANDWIDTH_8_MHZ,
+        BANDWIDTH_7_MHZ,
+        BANDWIDTH_6_MHZ,
+        BANDWIDTH_AUTO
+} fe_bandwidth_t;
+
+
+typedef enum fe_guard_interval {
+        GUARD_INTERVAL_1_32,
+        GUARD_INTERVAL_1_16,
+        GUARD_INTERVAL_1_8,
+        GUARD_INTERVAL_1_4,
+        GUARD_INTERVAL_AUTO
+} fe_guard_interval_t;
+
+
+typedef enum fe_hierarchy {
+        HIERARCHY_NONE,
+        HIERARCHY_1,
+        HIERARCHY_2,
+        HIERARCHY_4,
+        HIERARCHY_AUTO
+} fe_hierarchy_t;
+
+
+struct dvb_qpsk_parameters {
+        __u32           symbol_rate;  /* symbol rate in Symbols per second */
+        fe_code_rate_t  fec_inner;    /* forward error correction (see above) */
+};
+
+struct dvb_qam_parameters {
+        __u32           symbol_rate; /* symbol rate in Symbols per second */
+        fe_code_rate_t  fec_inner;   /* forward error correction (see above) */
+        fe_modulation_t modulation;  /* modulation type (see above) */
+};
+
+struct dvb_vsb_parameters {
+        fe_modulation_t modulation;  /* modulation type (see above) */
+};
+
+struct dvb_ofdm_parameters {
+        fe_bandwidth_t      bandwidth;
+        fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
+        fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
+        fe_modulation_t     constellation; /* modulation type (see above) */
+        fe_transmit_mode_t  transmission_mode;
+        fe_guard_interval_t guard_interval;
+        fe_hierarchy_t      hierarchy_information;
+};
+
+
+struct dvb_frontend_parameters {
+        __u32 frequency;     /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
+                             /* intermediate frequency in kHz for QPSK */
+        fe_spectral_inversion_t inversion;
+        union {
+                struct dvb_qpsk_parameters qpsk;
+                struct dvb_qam_parameters  qam;
+                struct dvb_ofdm_parameters ofdm;
+                struct dvb_vsb_parameters vsb;
+        } u;
+};
+
+
+struct dvb_frontend_event {
+        fe_status_t status;
+        struct dvb_frontend_parameters parameters;
+};
+
+/* S2API Commands */
+#define DTV_UNDEFINED           0
+#define DTV_TUNE                1
+#define DTV_CLEAR               2
+#define DTV_FREQUENCY           3
+#define DTV_MODULATION          4
+#define DTV_BANDWIDTH_HZ        5
+#define DTV_INVERSION           6
+#define DTV_DISEQC_MASTER       7
+#define DTV_SYMBOL_RATE         8
+#define DTV_INNER_FEC           9
+#define DTV_VOLTAGE             10
+#define DTV_TONE                11
+#define DTV_PILOT               12
+#define DTV_ROLLOFF             13
+#define DTV_DISEQC_SLAVE_REPLY  14
+
+/* Basic enumeration set for querying unlimited capabilities */
+#define DTV_FE_CAPABILITY_COUNT 15
+#define DTV_FE_CAPABILITY       16
+#define DTV_DELIVERY_SYSTEM     17
+
+/* ISDB-T and ISDB-Tsb */
+#define DTV_ISDBT_PARTIAL_RECEPTION     18
+#define DTV_ISDBT_SOUND_BROADCASTING    19
+
+#define DTV_ISDBT_SB_SUBCHANNEL_ID      20
+#define DTV_ISDBT_SB_SEGMENT_IDX        21
+#define DTV_ISDBT_SB_SEGMENT_COUNT      22
+
+#define DTV_ISDBT_LAYERA_FEC                    23
+#define DTV_ISDBT_LAYERA_MODULATION             24
+#define DTV_ISDBT_LAYERA_SEGMENT_COUNT          25
+#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING      26
+
+#define DTV_ISDBT_LAYERB_FEC                    27
+#define DTV_ISDBT_LAYERB_MODULATION             28
+#define DTV_ISDBT_LAYERB_SEGMENT_COUNT          29
+#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING      30
+
+#define DTV_ISDBT_LAYERC_FEC                    31
+#define DTV_ISDBT_LAYERC_MODULATION             32
+#define DTV_ISDBT_LAYERC_SEGMENT_COUNT          33
+#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING      34
+
+#define DTV_API_VERSION         35
+
+#define DTV_CODE_RATE_HP        36
+#define DTV_CODE_RATE_LP        37
+#define DTV_GUARD_INTERVAL      38
+#define DTV_TRANSMISSION_MODE   39
+#define DTV_HIERARCHY           40
+
+#define DTV_ISDBT_LAYER_ENABLED 41
+
+#define DTV_ISDBS_TS_ID         42
+
+#define DTV_MAX_COMMAND                         DTV_ISDBS_TS_ID
+
+typedef enum fe_pilot {
+        PILOT_ON,
+        PILOT_OFF,
+        PILOT_AUTO,
+} fe_pilot_t;
+
+typedef enum fe_rolloff {
+        ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+        ROLLOFF_20,
+        ROLLOFF_25,
+        ROLLOFF_AUTO,
+} fe_rolloff_t;
+
+typedef enum fe_delivery_system {
+        SYS_UNDEFINED,
+        SYS_DVBC_ANNEX_AC,
+        SYS_DVBC_ANNEX_B,
+        SYS_DVBT,
+        SYS_DSS,
+        SYS_DVBS,
+        SYS_DVBS2,
+        SYS_DVBH,
+        SYS_ISDBT,
+        SYS_ISDBS,
+        SYS_ISDBC,
+        SYS_ATSC,
+        SYS_ATSCMH,
+        SYS_DMBTH,
+        SYS_CMMB,
+        SYS_DAB,
+} fe_delivery_system_t;
+
+struct dtv_cmds_h {
+        char    *name;          /* A display name for debugging purposes */
+
+        __u32   cmd;            /* A unique ID */
+
+        /* Flags */
+        __u32   set:1;          /* Either a set or get property */
+        __u32   buffer:1;       /* Does this property use the buffer? */
+        __u32   reserved:30;    /* Align */
+};
+
+struct dtv_property {
+        __u32 cmd;
+        __u32 reserved[3];
+        union {
+                __u32 data;
+                struct {
+                        __u8 data[32];
+                        __u32 len;
+                        __u32 reserved1[3];
+                        void *reserved2;
+                } buffer;
+        } u;
+        int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+
+struct dtv_properties {
+        __u32 num;
+        struct dtv_property *props;
+};
+
+#define <link linkend="FE_GET_PROPERTY">FE_SET_PROPERTY</link>            _IOW('o', 82, struct dtv_properties)
+#define <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link>            _IOR('o', 83, struct dtv_properties)
+
+
+/**
+ * When set, this flag will disable any zigzagging or other "normal" tuning
+ * behaviour. Additionally, there will be no automatic monitoring of the lock
+ * status, and hence no frontend events will be generated. If a frontend device
+ * is closed, this flag will be automatically turned off when the device is
+ * reopened read-write.
+ */
+#define FE_TUNE_MODE_ONESHOT 0x01
+
+
+#define <link linkend="FE_GET_INFO">FE_GET_INFO</link>                _IOR('o', 61, struct dvb_frontend_info)
+
+#define <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link>   _IO('o', 62)
+#define <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link>  _IOW('o', 63, struct dvb_diseqc_master_cmd)
+#define <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> _IOR('o', 64, struct dvb_diseqc_slave_reply)
+#define <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link>       _IO('o', 65)  /* fe_sec_mini_cmd_t */
+
+#define <link linkend="FE_SET_TONE">FE_SET_TONE</link>                _IO('o', 66)  /* fe_sec_tone_mode_t */
+#define <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link>             _IO('o', 67)  /* fe_sec_voltage_t */
+#define <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link> _IO('o', 68)  /* int */
+
+#define <link linkend="FE_READ_STATUS">FE_READ_STATUS</link>             _IOR('o', 69, fe_status_t)
+#define <link linkend="FE_READ_BER">FE_READ_BER</link>                _IOR('o', 70, __u32)
+#define <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>    _IOR('o', 71, __u16)
+#define <link linkend="FE_READ_SNR">FE_READ_SNR</link>                _IOR('o', 72, __u16)
+#define <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> _IOR('o', 73, __u32)
+
+#define <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>            _IOW('o', 76, struct dvb_frontend_parameters)
+#define <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>            _IOR('o', 77, struct dvb_frontend_parameters)
+#define <link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link>  _IO('o', 81) /* unsigned int */
+#define <link linkend="FE_GET_EVENT">FE_GET_EVENT</link>               _IOR('o', 78, struct dvb_frontend_event)
+
+#define <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link> _IO('o', 80) /* unsigned int */
+
+#endif /*_DVBFRONTEND_H_*/
+</programlisting>
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
index 9d89a7b94fd5..300ba1f04177 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -73,7 +73,8 @@ a specific frontend type.</para>
 <section id="frontend_info">
 <title>frontend information</title>
 
-<para>Information about the frontend ca be queried with FE_GET_INFO.</para>
+<para>Information about the frontend ca be queried with
+        <link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
 
 <programlisting>
         struct dvb_frontend_info {
@@ -338,7 +339,7 @@ modulation mode which can be one of the following:
 <entry align="char">
 <para>This system call opens a named frontend device (/dev/dvb/adapter0/frontend0)
  for subsequent use. Usually the first thing to do after a successful open is to
- find out the frontend type with FE_GET_INFO.</para>
+ find out the frontend type with <link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
 <para>The device can be opened in read-only mode, which only allows monitoring of
  device status and statistics, or read/write mode, which allows any kind of use
  (e.g. performing tuning operations.)
@@ -478,7 +479,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_read_status">
+<section id="FE_READ_STATUS">
 <title>FE_READ_STATUS</title>
 <para>DESCRIPTION
 </para>
@@ -492,7 +493,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_READ_STATUS,
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_STATUS">FE_READ_STATUS</link>,
  fe_status_t &#x22C6;status);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -511,7 +512,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_READ_STATUS for this command.</para>
+<para>Equals <link linkend="FE_READ_STATUS">FE_READ_STATUS</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -542,7 +543,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_read_ber">
+<section id="FE_READ_BER">
 <title>FE_READ_BER</title>
 <para>DESCRIPTION
 </para>
@@ -557,7 +558,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_READ_BER,
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_BER">FE_READ_BER</link>,
  uint32_t &#x22C6;ber);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -575,7 +576,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_READ_BER for this command.</para>
+<para>Equals <link linkend="FE_READ_BER">FE_READ_BER</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -619,7 +620,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_read_snr">
+<section id="FE_READ_SNR">
 <title>FE_READ_SNR</title>
 
 <para>DESCRIPTION
@@ -634,7 +635,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_READ_SNR, int16_t
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, int16_t
  &#x22C6;snr);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -652,7 +653,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_READ_SNR for this command.</para>
+<para>Equals <link linkend="FE_READ_SNR">FE_READ_SNR</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -697,7 +698,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_read_signal_strength">
+<section id="FE_READ_SIGNAL_STRENGTH">
 <title>FE_READ_SIGNAL_STRENGTH</title>
 <para>DESCRIPTION
 </para>
@@ -712,7 +713,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl( int fd, int request =
- FE_READ_SIGNAL_STRENGTH, int16_t &#x22C6;strength);</para>
+ <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, int16_t &#x22C6;strength);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 
@@ -730,7 +731,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_READ_SIGNAL_STRENGTH for this
+<para>Equals <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> for this
  command.</para>
 </entry>
  </row><row><entry
@@ -775,7 +776,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_read_ub">
+<section id="FE_READ_UNCORRECTED_BLOCKS">
 <title>FE_READ_UNCORRECTED_BLOCKS</title>
 <para>DESCRIPTION
 </para>
@@ -797,7 +798,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl( int fd, int request =
- FE_READ_UNCORRECTED_BLOCKS, uint32_t &#x22C6;ublocks);</para>
+ <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link>, uint32_t &#x22C6;ublocks);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 <para>PARAMETERS
@@ -814,7 +815,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_READ_UNCORRECTED_BLOCKS for this
+<para>Equals <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> for this
  command.</para>
 </entry>
  </row><row><entry
@@ -852,7 +853,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_set_fe">
+<section id="FE_SET_FRONTEND">
 <title>FE_SET_FRONTEND</title>
 <para>DESCRIPTION
 </para>
@@ -861,8 +862,8 @@ modulation mode which can be one of the following:
 <para>This ioctl call starts a tuning operation using specified parameters. The result
  of this call will be successful if the parameters were valid and the tuning could
  be initiated. The result of the tuning operation in itself, however, will arrive
- asynchronously as an event (see documentation for FE_GET_EVENT and
- FrontendEvent.) If a new FE_SET_FRONTEND operation is initiated before
+ asynchronously as an event (see documentation for <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> and
+ FrontendEvent.) If a new <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> operation is initiated before
  the previous one was completed, the previous operation will be aborted in favor
  of the new one. This command requires read/write access to the device.</para>
 </entry>
@@ -872,7 +873,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_SET_FRONTEND,
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>,
  struct dvb_frontend_parameters &#x22C6;p);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -890,7 +891,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_SET_FRONTEND for this command.</para>
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -928,7 +929,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_get_fe">
+<section id="FE_GET_FRONTEND">
 <title>FE_GET_FRONTEND</title>
 <para>DESCRIPTION
 </para>
@@ -943,7 +944,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_GET_FRONTEND,
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>,
  struct dvb_frontend_parameters &#x22C6;p);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -962,7 +963,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_SET_FRONTEND for this command.</para>
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1003,7 +1004,7 @@ modulation mode which can be one of the following:
 
 </section>
 
-<section id="frontend_get_event">
+<section id="FE_GET_EVENT">
 <title>FE_GET_EVENT</title>
 <para>DESCRIPTION
 </para>
@@ -1024,7 +1025,8 @@ modulation mode which can be one of the following:
  rather small (room for 8 events), the queue must be serviced regularly to avoid
  overflow. If an overflow happens, the oldest event is discarded from the queue,
  and an error (EOVERFLOW) occurs the next time the queue is read. After
- reporting the error condition in this fashion, subsequent FE_GET_EVENT
+ reporting the error condition in this fashion, subsequent
+ <link linkend="FE_GET_EVENT">FE_GET_EVENT</link>
  calls will return events from the queue as usual.</para>
 </entry>
  </row><row><entry
@@ -1057,7 +1059,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_GET_EVENT for this command.</para>
+<para>Equals <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1115,7 +1117,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_get_info">
+<section id="FE_GET_INFO">
 <title>FE_GET_INFO</title>
 <para>DESCRIPTION
 </para>
@@ -1130,7 +1132,7 @@ modulation mode which can be one of the following:
 
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para> int ioctl(int fd, int request = FE_GET_INFO, struct
+<para> int ioctl(int fd, int request = <link linkend="FE_GET_INFO">FE_GET_INFO</link>, struct
  dvb_frontend_info &#x22C6;info);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1149,7 +1151,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_GET_INFO for this command.</para>
+<para>Equals <link linkend="FE_GET_INFO">FE_GET_INFO</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1181,7 +1183,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_diseqc_reset_overload">
+<section id="FE_DISEQC_RESET_OVERLOAD">
 <title>FE_DISEQC_RESET_OVERLOAD</title>
 <para>DESCRIPTION
 </para>
@@ -1199,7 +1201,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl(int fd, int request =
- FE_DISEQC_RESET_OVERLOAD);</para>
+ <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link>);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 <para>PARAMETERS
@@ -1216,7 +1218,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_DISEQC_RESET_OVERLOAD for this
+<para>Equals <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link> for this
  command.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1247,7 +1249,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_diseqc_send_master_cmd">
+<section id="FE_DISEQC_SEND_MASTER_CMD">
 <title>FE_DISEQC_SEND_MASTER_CMD</title>
 <para>DESCRIPTION
 </para>
@@ -1261,7 +1263,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl(int fd, int request =
- FE_DISEQC_SEND_MASTER_CMD, struct
+ <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link>, struct
  dvb_diseqc_master_cmd &#x22C6;cmd);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1280,7 +1282,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_DISEQC_SEND_MASTER_CMD for this
+<para>Equals <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link> for this
  command.</para>
 </entry>
  </row><row><entry
@@ -1335,7 +1337,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_diseqc_recv_slave_reply">
+<section id="FE_DISEQC_RECV_SLAVE_REPLY">
 <title>FE_DISEQC_RECV_SLAVE_REPLY</title>
 <para>DESCRIPTION
 </para>
@@ -1350,7 +1352,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl(int fd, int request =
- FE_DISEQC_RECV_SLAVE_REPLY, struct
+ <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link>, struct
  dvb_diseqc_slave_reply &#x22C6;reply);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1369,7 +1371,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_DISEQC_RECV_SLAVE_REPLY for this
+<para>Equals <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> for this
  command.</para>
 </entry>
  </row><row><entry
@@ -1423,7 +1425,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_diseqc_send_burst">
+<section id="FE_DISEQC_SEND_BURST">
 <title>FE_DISEQC_SEND_BURST</title>
 <para>DESCRIPTION
 </para>
@@ -1438,7 +1440,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl(int fd, int request =
- FE_DISEQC_SEND_BURST, fe_sec_mini_cmd_t burst);</para>
+ <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link>, fe_sec_mini_cmd_t burst);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 
@@ -1456,7 +1458,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_DISEQC_SEND_BURST for this command.</para>
+<para>Equals <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1509,7 +1511,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_set_tone">
+<section id="FE_SET_TONE">
 <title>FE_SET_TONE</title>
 <para>DESCRIPTION
 </para>
@@ -1523,7 +1525,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_SET_TONE,
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_TONE">FE_SET_TONE</link>,
  fe_sec_tone_mode_t tone);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1541,7 +1543,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_SET_TONE for this command.</para>
+<para>Equals <link linkend="FE_SET_TONE">FE_SET_TONE</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1592,7 +1594,7 @@ modulation mode which can be one of the following:
 </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="fe_set_voltage">
+<section id="FE_SET_VOLTAGE">
 <title>FE_SET_VOLTAGE</title>
 <para>DESCRIPTION
 </para>
@@ -1606,7 +1608,7 @@ modulation mode which can be one of the following:
 </para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
-<para>int ioctl(int fd, int request = FE_SET_VOLTAGE,
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link>,
  fe_sec_voltage_t voltage);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
@@ -1625,7 +1627,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_SET_VOLTAGE for this command.</para>
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1677,7 +1679,7 @@ modulation mode which can be one of the following:
  </row></tbody></tgroup></informaltable>
 </section>
 
-<section id="frontend_enable_high_lnb_volt">
+<section id="FE_ENABLE_HIGH_LNB_VOLTAGE">
 <title>FE_ENABLE_HIGH_LNB_VOLTAGE</title>
 <para>DESCRIPTION
 </para>
@@ -1694,7 +1696,7 @@ modulation mode which can be one of the following:
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>int ioctl(int fd, int request =
- FE_ENABLE_HIGH_LNB_VOLTAGE, int high);</para>
+ <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link>, int high);</para>
 </entry>
  </row></tbody></tgroup></informaltable>
 
@@ -1712,7 +1714,7 @@ modulation mode which can be one of the following:
 <para>int request</para>
 </entry><entry
  align="char">
-<para>Equals FE_SET_VOLTAGE for this command.</para>
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
 </entry>
  </row><row><entry
  align="char">
@@ -1762,5 +1764,82 @@ modulation mode which can be one of the following:
 </entry>
  </row></tbody></tgroup></informaltable>
 </section>
+
+<section id="FE_SET_FRONTEND_TUNE_MODE">
+<title>FE_SET_FRONTEND_TUNE_MODE</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>Allow setting tuner mode flags to the frontend.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+<link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link>, unsigned int flags);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+        <para>unsigned int flags</para>
+</entry>
+<entry align="char">
+<para>
+FE_TUNE_MODE_ONESHOT When set, this flag will disable any zigzagging or other "normal" tuning behaviour. Additionally, there will be no automatic monitoring of the lock status, and hence no frontend events will be generated. If a frontend device is closed, this flag will be automatically turned off when the device is reopened read-write.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char"><para>EINVAL</para></entry>
+<entry align="char"><para>Invalid argument.</para></entry>
+ </row></tbody></tgroup></informaltable>
 </section>
-&sub-isdbt;
+
+<section id="FE_DISHNETWORK_SEND_LEGACY_CMD">
+        <title>FE_DISHNETWORK_SEND_LEGACY_CMD</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>WARNING: This is a very obscure legacy command, used only at stv0299 driver. Should not be used on newer drivers.</para>
+<para>It provides a non-standard method for selecting Diseqc voltage on the frontend, for Dish Network legacy switches.</para>
+<para>As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+        <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link>, unsigned long cmd);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+        <para>unsigned long cmd</para>
+</entry>
+<entry align="char">
+<para>
+sends the specified raw cmd to the dish via DISEqC.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+        <para>There are no errors in use for this call</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+</section>
+
+&sub-dvbproperty;
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index c671a0168096..1448b33fd222 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -417,8 +417,8 @@ desc->chip->end();
       </para>
       <para>
         To make use of the split implementation, replace the call to
-        __do_IRQ by a call to desc->chip->handle_irq() and associate
-        the appropriate handler function to desc->chip->handle_irq().
+        __do_IRQ by a call to desc->handle_irq() and associate
+        the appropriate handler function to desc->handle_irq().
         In most cases the generic handler implementations should
         be sufficient.
      </para>
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index 992e67e6be7f..7b3f49363413 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -352,7 +352,7 @@ asmlinkage long sys_mycall(int arg)
   </para>
 
   <programlisting>
-if (signal_pending()) 
+if (signal_pending(current))
         return -ERESTARTSYS;
   </programlisting>
 
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index 0eb43c1970bb..c725cb852c54 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -23,6 +23,7 @@
 <!ENTITY VIDIOC-ENUMINPUT "<link linkend='vidioc-enuminput'><constant>VIDIOC_ENUMINPUT</constant></link>">
 <!ENTITY VIDIOC-ENUMOUTPUT "<link linkend='vidioc-enumoutput'><constant>VIDIOC_ENUMOUTPUT</constant></link>">
 <!ENTITY VIDIOC-ENUMSTD "<link linkend='vidioc-enumstd'><constant>VIDIOC_ENUMSTD</constant></link>">
+<!ENTITY VIDIOC-ENUM-DV-PRESETS "<link linkend='vidioc-enum-dv-presets'><constant>VIDIOC_ENUM_DV_PRESETS</constant></link>">
 <!ENTITY VIDIOC-ENUM-FMT "<link linkend='vidioc-enum-fmt'><constant>VIDIOC_ENUM_FMT</constant></link>">
 <!ENTITY VIDIOC-ENUM-FRAMEINTERVALS "<link linkend='vidioc-enum-frameintervals'><constant>VIDIOC_ENUM_FRAMEINTERVALS</constant></link>">
 <!ENTITY VIDIOC-ENUM-FRAMESIZES "<link linkend='vidioc-enum-framesizes'><constant>VIDIOC_ENUM_FRAMESIZES</constant></link>">
@@ -30,6 +31,8 @@
 <!ENTITY VIDIOC-G-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_G_AUDOUT</constant></link>">
 <!ENTITY VIDIOC-G-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_G_CROP</constant></link>">
 <!ENTITY VIDIOC-G-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_G_CTRL</constant></link>">
+<!ENTITY VIDIOC-G-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_G_DV_PRESET</constant></link>">
+<!ENTITY VIDIOC-G-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_G_DV_TIMINGS</constant></link>">
 <!ENTITY VIDIOC-G-ENC-INDEX "<link linkend='vidioc-g-enc-index'><constant>VIDIOC_G_ENC_INDEX</constant></link>">
 <!ENTITY VIDIOC-G-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_G_EXT_CTRLS</constant></link>">
 <!ENTITY VIDIOC-G-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_G_FBUF</constant></link>">
@@ -53,6 +56,7 @@
 <!ENTITY VIDIOC-QUERYCTRL "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYCTRL</constant></link>">
 <!ENTITY VIDIOC-QUERYMENU "<link linkend='vidioc-queryctrl'><constant>VIDIOC_QUERYMENU</constant></link>">
 <!ENTITY VIDIOC-QUERYSTD "<link linkend='vidioc-querystd'><constant>VIDIOC_QUERYSTD</constant></link>">
+<!ENTITY VIDIOC-QUERY-DV-PRESET "<link linkend='vidioc-query-dv-preset'><constant>VIDIOC_QUERY_DV_PRESET</constant></link>">
 <!ENTITY VIDIOC-REQBUFS "<link linkend='vidioc-reqbufs'><constant>VIDIOC_REQBUFS</constant></link>">
 <!ENTITY VIDIOC-STREAMOFF "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMOFF</constant></link>">
 <!ENTITY VIDIOC-STREAMON "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMON</constant></link>">
@@ -60,6 +64,8 @@
 <!ENTITY VIDIOC-S-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_S_AUDOUT</constant></link>">
 <!ENTITY VIDIOC-S-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_S_CROP</constant></link>">
 <!ENTITY VIDIOC-S-CTRL "<link linkend='vidioc-g-ctrl'><constant>VIDIOC_S_CTRL</constant></link>">
+<!ENTITY VIDIOC-S-DV-PRESET "<link linkend='vidioc-g-dv-preset'><constant>VIDIOC_S_DV_PRESET</constant></link>">
+<!ENTITY VIDIOC-S-DV-TIMINGS "<link linkend='vidioc-g-dv-timings'><constant>VIDIOC_S_DV_TIMINGS</constant></link>">
 <!ENTITY VIDIOC-S-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_S_EXT_CTRLS</constant></link>">
 <!ENTITY VIDIOC-S-FBUF "<link linkend='vidioc-g-fbuf'><constant>VIDIOC_S_FBUF</constant></link>">
 <!ENTITY VIDIOC-S-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_S_FMT</constant></link>">
@@ -118,6 +124,7 @@
 <!-- Structures -->
 <!ENTITY v4l2-audio "struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link>">
 <!ENTITY v4l2-audioout "struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link>">
+<!ENTITY v4l2-bt-timings "struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link>">
 <!ENTITY v4l2-buffer "struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link>">
 <!ENTITY v4l2-capability "struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link>">
 <!ENTITY v4l2-captureparm "struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link>">
@@ -128,6 +135,9 @@
 <!ENTITY v4l2-dbg-chip-ident "struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link>">
 <!ENTITY v4l2-dbg-match "struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link>">
 <!ENTITY v4l2-dbg-register "struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link>">
+<!ENTITY v4l2-dv-enum-preset "struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link>">
+<!ENTITY v4l2-dv-preset "struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link>">
+<!ENTITY v4l2-dv-timings "struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link>">
 <!ENTITY v4l2-enc-idx "struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link>">
 <!ENTITY v4l2-enc-idx-entry "struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link>">
 <!ENTITY v4l2-encoder-cmd "struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link>">
@@ -243,6 +253,10 @@
 <!ENTITY sub-enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
 <!ENTITY sub-enuminput SYSTEM "v4l/vidioc-enuminput.xml">
 <!ENTITY sub-enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
+<!ENTITY sub-enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
+<!ENTITY sub-g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
+<!ENTITY sub-query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
+<!ENTITY sub-g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
 <!ENTITY sub-enumstd SYSTEM "v4l/vidioc-enumstd.xml">
 <!ENTITY sub-g-audio SYSTEM "v4l/vidioc-g-audio.xml">
 <!ENTITY sub-g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
@@ -280,7 +294,7 @@
 <!ENTITY sub-v4l2 SYSTEM "v4l/v4l2.xml">
 <!ENTITY sub-intro SYSTEM "dvb/intro.xml">
 <!ENTITY sub-frontend SYSTEM "dvb/frontend.xml">
-<!ENTITY sub-isdbt SYSTEM "dvb/isdbt.xml">
+<!ENTITY sub-dvbproperty SYSTEM "dvb/dvbproperty.xml">
 <!ENTITY sub-demux SYSTEM "dvb/demux.xml">
 <!ENTITY sub-video SYSTEM "dvb/video.xml">
 <!ENTITY sub-audio SYSTEM "dvb/audio.xml">
@@ -288,6 +302,7 @@
 <!ENTITY sub-net SYSTEM "dvb/net.xml">
 <!ENTITY sub-kdapi SYSTEM "dvb/kdapi.xml">
 <!ENTITY sub-examples SYSTEM "dvb/examples.xml">
+<!ENTITY sub-frontend-h SYSTEM "dvb/frontend.h.xml">
 <!ENTITY sub-dvbapi SYSTEM "dvb/dvbapi.xml">
 <!ENTITY sub-media SYSTEM "media.xml">
 <!ENTITY sub-media-entities SYSTEM "media-entities.tmpl">
@@ -332,6 +347,10 @@
 <!ENTITY enumaudioout SYSTEM "v4l/vidioc-enumaudioout.xml">
 <!ENTITY enuminput SYSTEM "v4l/vidioc-enuminput.xml">
 <!ENTITY enumoutput SYSTEM "v4l/vidioc-enumoutput.xml">
+<!ENTITY enum-dv-presets SYSTEM "v4l/vidioc-enum-dv-presets.xml">
+<!ENTITY g-dv-preset SYSTEM "v4l/vidioc-g-dv-preset.xml">
+<!ENTITY query-dv-preset SYSTEM "v4l/vidioc-query-dv-preset.xml">
+<!ENTITY g-dv-timings SYSTEM "v4l/vidioc-g-dv-timings.xml">
 <!ENTITY enumstd SYSTEM "v4l/vidioc-enumstd.xml">
 <!ENTITY g-audio SYSTEM "v4l/vidioc-g-audio.xml">
 <!ENTITY g-audioout SYSTEM "v4l/vidioc-g-audioout.xml">
diff --git a/Documentation/DocBook/media-indices.tmpl b/Documentation/DocBook/media-indices.tmpl
index 9e30a236d74f..78d6031de001 100644
--- a/Documentation/DocBook/media-indices.tmpl
+++ b/Documentation/DocBook/media-indices.tmpl
@@ -36,6 +36,7 @@
 <indexentry><primaryie>enum&nbsp;<link linkend='v4l2-preemphasis'>v4l2_preemphasis</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audio'>v4l2_audio</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-audioout'>v4l2_audioout</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-bt-timings'>v4l2_bt_timings</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-buffer'>v4l2_buffer</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-capability'>v4l2_capability</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-captureparm'>v4l2_captureparm</link></primaryie></indexentry>
@@ -46,6 +47,9 @@
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-chip-ident'>v4l2_dbg_chip_ident</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-match'>v4l2_dbg_match</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dbg-register'>v4l2_dbg_register</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-enum-preset'>v4l2_dv_enum_preset</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-preset'>v4l2_dv_preset</link></primaryie></indexentry>
+<indexentry><primaryie>struct&nbsp;<link linkend='v4l2-dv-timings'>v4l2_dv_timings</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link></primaryie></indexentry>
 <indexentry><primaryie>struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link></primaryie></indexentry>
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index df0d089d0fb9..f508a8a27fea 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -362,7 +362,7 @@ module_exit(board_cleanup);
         <sect1 id="Multiple_chip_control">
                 <title>Multiple chip control</title>
                 <para>
-                        The nand driver can control chip arrays. Therefor the
+                        The nand driver can control chip arrays. Therefore the
                         board driver must provide an own select_chip function. This
                         function must (de)select the requested chip.
                         The function pointer in the nand_chip structure must
diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl
deleted file mode 100644
index 9eba4b7af73d..000000000000
--- a/Documentation/DocBook/procfs-guide.tmpl
+++ /dev/null
@@ -1,626 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-        "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
-<!ENTITY procfsexample SYSTEM "procfs_example.xml">
-]>
-
-<book id="LKProcfsGuide">
-  <bookinfo>
-    <title>Linux Kernel Procfs Guide</title>
-
-    <authorgroup>
-      <author>
-        <firstname>Erik</firstname>
-        <othername>(J.A.K.)</othername>
-        <surname>Mouw</surname>
-        <affiliation>
-          <address>
-            <email>mouw@nl.linux.org</email>
-          </address>
-        </affiliation>
-      </author>
-      <othercredit>
-        <contrib>
-        This software and documentation were written while working on the
-        LART computing board
-        (<ulink url="http://www.lartmaker.nl/">http://www.lartmaker.nl/</ulink>),
-        which was sponsored by the Delt University of Technology projects
-        Mobile Multi-media Communications and Ubiquitous Communications.
-        </contrib>
-      </othercredit>
-    </authorgroup>
-
-    <revhistory>
-      <revision>
-        <revnumber>1.0</revnumber>
-        <date>May 30, 2001</date>
-        <revremark>Initial revision posted to linux-kernel</revremark>
-      </revision>
-      <revision>
-        <revnumber>1.1</revnumber>
-        <date>June 3, 2001</date>
-        <revremark>Revised after comments from linux-kernel</revremark>
-      </revision>
-    </revhistory>
-
-    <copyright>
-      <year>2001</year>
-      <holder>Erik Mouw</holder>
-    </copyright>
-
-
-    <legalnotice>
-      <para>
-        This documentation is free software; you can redistribute it
-        and/or modify it under the terms of the GNU General Public
-        License as published by the Free Software Foundation; either
-        version 2 of the License, or (at your option) any later
-        version.
-      </para>
-      
-      <para>
-        This documentation is distributed in the hope that it will be
-        useful, but WITHOUT ANY WARRANTY; without even the implied
-        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
-        PURPOSE.  See the GNU General Public License for more details.
-      </para>
-      
-      <para>
-        You should have received a copy of the GNU General Public
-        License along with this program; if not, write to the Free
-        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-        MA 02111-1307 USA
-      </para>
-      
-      <para>
-        For more details see the file COPYING in the source
-        distribution of Linux.
-      </para>
-    </legalnotice>
-  </bookinfo>
-
-
-
-
-  <toc>
-  </toc>
-
-
-
-
-  <preface id="Preface">
-    <title>Preface</title>
-
-    <para>
-      This guide describes the use of the procfs file system from
-      within the Linux kernel. The idea to write this guide came up on
-      the #kernelnewbies IRC channel (see <ulink
-      url="http://www.kernelnewbies.org/">http://www.kernelnewbies.org/</ulink>),
-      when Jeff Garzik explained the use of procfs and forwarded me a
-      message Alexander Viro wrote to the linux-kernel mailing list. I
-      agreed to write it up nicely, so here it is.
-    </para>
-
-    <para>
-      I'd like to thank Jeff Garzik
-      <email>jgarzik@pobox.com</email> and Alexander Viro
-      <email>viro@parcelfarce.linux.theplanet.co.uk</email> for their input,
-      Tim Waugh <email>twaugh@redhat.com</email> for his <ulink
-      url="http://people.redhat.com/twaugh/docbook/selfdocbook/">Selfdocbook</ulink>,
-      and Marc Joosen <email>marcj@historia.et.tudelft.nl</email> for
-      proofreading.
-    </para>
-
-    <para>
-      Erik
-    </para>
-  </preface>
-
-
-
-
-  <chapter id="intro">
-    <title>Introduction</title>
-
-    <para>
-      The <filename class="directory">/proc</filename> file system
-      (procfs) is a special file system in the linux kernel. It's a
-      virtual file system: it is not associated with a block device
-      but exists only in memory. The files in the procfs are there to
-      allow userland programs access to certain information from the
-      kernel (like process information in <filename
-      class="directory">/proc/[0-9]+/</filename>), but also for debug
-      purposes (like <filename>/proc/ksyms</filename>).
-    </para>
-
-    <para>
-      This guide describes the use of the procfs file system from
-      within the Linux kernel. It starts by introducing all relevant
-      functions to manage the files within the file system. After that
-      it shows how to communicate with userland, and some tips and
-      tricks will be pointed out. Finally a complete example will be
-      shown.
-    </para>
-
-    <para>
-      Note that the files in <filename
-      class="directory">/proc/sys</filename> are sysctl files: they
-      don't belong to procfs and are governed by a completely
-      different API described in the Kernel API book.
-    </para>
-  </chapter>
-
-
-
-
-  <chapter id="managing">
-    <title>Managing procfs entries</title>
-    
-    <para>
-      This chapter describes the functions that various kernel
-      components use to populate the procfs with files, symlinks,
-      device nodes, and directories.
-    </para>
-
-    <para>
-      A minor note before we start: if you want to use any of the
-      procfs functions, be sure to include the correct header file! 
-      This should be one of the first lines in your code:
-    </para>
-
-    <programlisting>
-#include &lt;linux/proc_fs.h&gt;
-    </programlisting>
-
-
-
-
-    <sect1 id="regularfile">
-      <title>Creating a regular file</title>
-      
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>struct proc_dir_entry* <function>create_proc_entry</function></funcdef>
-          <paramdef>const char* <parameter>name</parameter></paramdef>
-          <paramdef>mode_t <parameter>mode</parameter></paramdef>
-          <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-
-      <para>
-        This function creates a regular file with the name
-        <parameter>name</parameter>, file mode
-        <parameter>mode</parameter> in the directory
-        <parameter>parent</parameter>. To create a file in the root of
-        the procfs, use <constant>NULL</constant> as
-        <parameter>parent</parameter> parameter. When successful, the
-        function will return a pointer to the freshly created
-        <structname>struct proc_dir_entry</structname>; otherwise it
-        will return <constant>NULL</constant>. <xref
-        linkend="userland"/> describes how to do something useful with
-        regular files.
-      </para>
-
-      <para>
-        Note that it is specifically supported that you can pass a
-        path that spans multiple directories. For example
-        <function>create_proc_entry</function>(<parameter>"drivers/via0/info"</parameter>)
-        will create the <filename class="directory">via0</filename>
-        directory if necessary, with standard
-        <constant>0755</constant> permissions.
-      </para>
-
-    <para>
-      If you only want to be able to read the file, the function
-      <function>create_proc_read_entry</function> described in <xref
-      linkend="convenience"/> may be used to create and initialise
-      the procfs entry in one single call.
-    </para>
-    </sect1>
-
-
-
-
-    <sect1 id="Creating_a_symlink">
-      <title>Creating a symlink</title>
-
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>struct proc_dir_entry*
-          <function>proc_symlink</function></funcdef> <paramdef>const
-          char* <parameter>name</parameter></paramdef>
-          <paramdef>struct proc_dir_entry*
-          <parameter>parent</parameter></paramdef> <paramdef>const
-          char* <parameter>dest</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-      
-      <para>
-        This creates a symlink in the procfs directory
-        <parameter>parent</parameter> that points from
-        <parameter>name</parameter> to
-        <parameter>dest</parameter>. This translates in userland to
-        <literal>ln -s</literal> <parameter>dest</parameter>
-        <parameter>name</parameter>.
-      </para>
-    </sect1>
-
-    <sect1 id="Creating_a_directory">
-      <title>Creating a directory</title>
-      
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>struct proc_dir_entry* <function>proc_mkdir</function></funcdef>
-          <paramdef>const char* <parameter>name</parameter></paramdef>
-          <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-
-      <para>
-        Create a directory <parameter>name</parameter> in the procfs
-        directory <parameter>parent</parameter>.
-      </para>
-    </sect1>
-
-
-
-
-    <sect1 id="Removing_an_entry">
-      <title>Removing an entry</title>
-      
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>void <function>remove_proc_entry</function></funcdef>
-          <paramdef>const char* <parameter>name</parameter></paramdef>
-          <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-
-      <para>
-        Removes the entry <parameter>name</parameter> in the directory
-        <parameter>parent</parameter> from the procfs. Entries are
-        removed by their <emphasis>name</emphasis>, not by the
-        <structname>struct proc_dir_entry</structname> returned by the
-        various create functions. Note that this function doesn't
-        recursively remove entries.
-      </para>
-
-      <para>
-        Be sure to free the <structfield>data</structfield> entry from
-        the <structname>struct proc_dir_entry</structname> before
-        <function>remove_proc_entry</function> is called (that is: if
-        there was some <structfield>data</structfield> allocated, of
-        course). See <xref linkend="usingdata"/> for more information
-        on using the <structfield>data</structfield> entry.
-      </para>
-    </sect1>
-  </chapter>
-
-
-
-
-  <chapter id="userland">
-    <title>Communicating with userland</title>
-    
-    <para>
-       Instead of reading (or writing) information directly from
-       kernel memory, procfs works with <emphasis>call back
-       functions</emphasis> for files: functions that are called when
-       a specific file is being read or written. Such functions have
-       to be initialised after the procfs file is created by setting
-       the <structfield>read_proc</structfield> and/or
-       <structfield>write_proc</structfield> fields in the
-       <structname>struct proc_dir_entry*</structname> that the
-       function <function>create_proc_entry</function> returned:
-    </para>
-
-    <programlisting>
-struct proc_dir_entry* entry;
-
-entry->read_proc = read_proc_foo;
-entry->write_proc = write_proc_foo;
-    </programlisting>
-
-    <para>
-      If you only want to use a the
-      <structfield>read_proc</structfield>, the function
-      <function>create_proc_read_entry</function> described in <xref
-      linkend="convenience"/> may be used to create and initialise the
-      procfs entry in one single call.
-    </para>
-
-
-
-    <sect1 id="Reading_data">
-      <title>Reading data</title>
-
-      <para>
-        The read function is a call back function that allows userland
-        processes to read data from the kernel. The read function
-        should have the following format:
-      </para>
-
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>int <function>read_func</function></funcdef>
-          <paramdef>char* <parameter>buffer</parameter></paramdef>
-          <paramdef>char** <parameter>start</parameter></paramdef>
-          <paramdef>off_t <parameter>off</parameter></paramdef>
-          <paramdef>int <parameter>count</parameter></paramdef>
-          <paramdef>int* <parameter>peof</parameter></paramdef>
-          <paramdef>void* <parameter>data</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-
-      <para>
-        The read function should write its information into the
-        <parameter>buffer</parameter>, which will be exactly
-        <literal>PAGE_SIZE</literal> bytes long.
-      </para>
-
-      <para>
-        The parameter
-        <parameter>peof</parameter> should be used to signal that the
-        end of the file has been reached by writing
-        <literal>1</literal> to the memory location
-        <parameter>peof</parameter> points to.
-      </para>
-
-      <para>
-        The <parameter>data</parameter>
-        parameter can be used to create a single call back function for
-        several files, see <xref linkend="usingdata"/>.
-      </para>
-
-      <para>
-        The rest of the parameters and the return value are described
-        by a comment in <filename>fs/proc/generic.c</filename> as follows:
-      </para>
-
-      <blockquote>
-        <para>
-        You have three ways to return data:
-        </para>
-        <orderedlist>
-          <listitem>
-            <para>
-              Leave <literal>*start = NULL</literal>.  (This is the default.)
-              Put the data of the requested offset at that
-              offset within the buffer.  Return the number (<literal>n</literal>)
-              of bytes there are from the beginning of the
-              buffer up to the last byte of data.  If the
-              number of supplied bytes (<literal>= n - offset</literal>) is
-              greater than zero and you didn't signal eof
-              and the reader is prepared to take more data
-              you will be called again with the requested
-              offset advanced by the number of bytes
-              absorbed.  This interface is useful for files
-              no larger than the buffer.
-            </para>
-          </listitem>
-          <listitem>
-            <para>
-              Set <literal>*start</literal> to an unsigned long value less than
-              the buffer address but greater than zero.
-              Put the data of the requested offset at the
-              beginning of the buffer.  Return the number of
-              bytes of data placed there.  If this number is
-              greater than zero and you didn't signal eof
-              and the reader is prepared to take more data
-              you will be called again with the requested
-              offset advanced by <literal>*start</literal>.  This interface is
-              useful when you have a large file consisting
-              of a series of blocks which you want to count
-              and return as wholes.
-              (Hack by Paul.Russell@rustcorp.com.au)
-            </para>
-          </listitem>
-          <listitem>
-            <para>
-              Set <literal>*start</literal> to an address within the buffer.
-              Put the data of the requested offset at <literal>*start</literal>.
-              Return the number of bytes of data placed there.
-              If this number is greater than zero and you
-              didn't signal eof and the reader is prepared to
-              take more data you will be called again with the
-              requested offset advanced by the number of bytes
-              absorbed.
-            </para>
-          </listitem>
-        </orderedlist>
-      </blockquote>
-
-      <para>
-        <xref linkend="example"/> shows how to use a read call back
-        function.
-      </para>
-    </sect1>
-
-
-
-
-    <sect1 id="Writing_data">
-      <title>Writing data</title>
-
-      <para>
-        The write call back function allows a userland process to write
-        data to the kernel, so it has some kind of control over the
-        kernel. The write function should have the following format:
-      </para>
-
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>int <function>write_func</function></funcdef>
-          <paramdef>struct file* <parameter>file</parameter></paramdef>
-          <paramdef>const char* <parameter>buffer</parameter></paramdef>
-          <paramdef>unsigned long <parameter>count</parameter></paramdef>
-          <paramdef>void* <parameter>data</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-
-      <para>
-        The write function should read <parameter>count</parameter>
-        bytes at maximum from the <parameter>buffer</parameter>. Note
-        that the <parameter>buffer</parameter> doesn't live in the
-        kernel's memory space, so it should first be copied to kernel
-        space with <function>copy_from_user</function>. The
-        <parameter>file</parameter> parameter is usually
-        ignored. <xref linkend="usingdata"/> shows how to use the
-        <parameter>data</parameter> parameter.
-      </para>
-
-      <para>
-        Again, <xref linkend="example"/> shows how to use this call back
-        function.
-      </para>
-    </sect1>
-
-
-
-
-    <sect1 id="usingdata">
-      <title>A single call back for many files</title>
-
-      <para>
-         When a large number of almost identical files is used, it's
-         quite inconvenient to use a separate call back function for
-         each file. A better approach is to have a single call back
-         function that distinguishes between the files by using the
-         <structfield>data</structfield> field in <structname>struct
-         proc_dir_entry</structname>. First of all, the
-         <structfield>data</structfield> field has to be initialised:
-      </para>
-
-      <programlisting>
-struct proc_dir_entry* entry;
-struct my_file_data *file_data;
-
-file_data = kmalloc(sizeof(struct my_file_data), GFP_KERNEL);
-entry->data = file_data;
-      </programlisting>
-     
-      <para>
-          The <structfield>data</structfield> field is a <type>void
-          *</type>, so it can be initialised with anything.
-      </para>
-
-      <para>
-        Now that the <structfield>data</structfield> field is set, the
-        <function>read_proc</function> and
-        <function>write_proc</function> can use it to distinguish
-        between files because they get it passed into their
-        <parameter>data</parameter> parameter:
-      </para>
-
-      <programlisting>
-int foo_read_func(char *page, char **start, off_t off,
-                  int count, int *eof, void *data)
-{
-        int len;
-
-        if(data == file_data) {
-                /* special case for this file */
-        } else {
-                /* normal processing */
-        }
-
-        return len;
-}
-      </programlisting>
-
-      <para>
-        Be sure to free the <structfield>data</structfield> data field
-        when removing the procfs entry.
-      </para>
-    </sect1>
-  </chapter>
-
-
-
-
-  <chapter id="tips">
-    <title>Tips and tricks</title>
-
-
-
-
-    <sect1 id="convenience">
-      <title>Convenience functions</title>
-
-      <funcsynopsis>
-        <funcprototype>
-          <funcdef>struct proc_dir_entry* <function>create_proc_read_entry</function></funcdef>
-          <paramdef>const char* <parameter>name</parameter></paramdef>
-          <paramdef>mode_t <parameter>mode</parameter></paramdef>
-          <paramdef>struct proc_dir_entry* <parameter>parent</parameter></paramdef>
-          <paramdef>read_proc_t* <parameter>read_proc</parameter></paramdef>
-          <paramdef>void* <parameter>data</parameter></paramdef>
-        </funcprototype>
-      </funcsynopsis>
-      
-      <para>
-        This function creates a regular file in exactly the same way
-        as <function>create_proc_entry</function> from <xref
-        linkend="regularfile"/> does, but also allows to set the read
-        function <parameter>read_proc</parameter> in one call. This
-        function can set the <parameter>data</parameter> as well, like
-        explained in <xref linkend="usingdata"/>.
-      </para>
-    </sect1>
-
-
-
-    <sect1 id="Modules">
-      <title>Modules</title>
-
-      <para>
-        If procfs is being used from within a module, be sure to set
-        the <structfield>owner</structfield> field in the
-        <structname>struct proc_dir_entry</structname> to
-        <constant>THIS_MODULE</constant>.
-      </para>
-
-      <programlisting>
-struct proc_dir_entry* entry;
-
-entry->owner = THIS_MODULE;
-      </programlisting>
-    </sect1>
-
-
-
-
-    <sect1 id="Mode_and_ownership">
-      <title>Mode and ownership</title>
-
-      <para>
-        Sometimes it is useful to change the mode and/or ownership of
-        a procfs entry. Here is an example that shows how to achieve
-        that:
-      </para>
-
-      <programlisting>
-struct proc_dir_entry* entry;
-
-entry->mode =  S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH;
-entry->uid = 0;
-entry->gid = 100;
-      </programlisting>
-
-    </sect1>
-  </chapter>
-
-
-
-
-  <chapter id="example">
-    <title>Example</title>
-
-    <!-- be careful with the example code: it shouldn't be wider than
-    approx. 60 columns, or otherwise it won't fit properly on a page
-    -->
-
-&procfsexample;
-
-  </chapter>
-</book>
diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c
deleted file mode 100644
index a5b11793b1e0..000000000000
--- a/Documentation/DocBook/procfs_example.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * procfs_example.c: an example proc interface
- *
- * Copyright (C) 2001, Erik Mouw (mouw@nl.linux.org)
- *
- * This file accompanies the procfs-guide in the Linux kernel
- * source. Its main use is to demonstrate the concepts and
- * functions described in the guide.
- *
- * This software has been developed while working on the LART
- * computing board (http://www.lartmaker.nl), which was sponsored
- * by the Delt University of Technology projects Mobile Multi-media
- * Communications and Ubiquitous Communications.
- *
- * This program is free software; you can redistribute
- * it and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- * 
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/jiffies.h>
-#include <asm/uaccess.h>
-
-
-#define MODULE_VERS "1.0"
-#define MODULE_NAME "procfs_example"
-
-#define FOOBAR_LEN 8
-
-struct fb_data_t {
-        char name[FOOBAR_LEN + 1];
-        char value[FOOBAR_LEN + 1];
-};
-
-
-static struct proc_dir_entry *example_dir, *foo_file,
-        *bar_file, *jiffies_file, *symlink;
-
-
-struct fb_data_t foo_data, bar_data;
-
-
-static int proc_read_jiffies(char *page, char **start,
-                             off_t off, int count,
-                             int *eof, void *data)
-{
-        int len;
-
-        len = sprintf(page, "jiffies = %ld\n",
-                      jiffies);
-
-        return len;
-}
-
-
-static int proc_read_foobar(char *page, char **start,
-                            off_t off, int count, 
-                            int *eof, void *data)
-{
-        int len;
-        struct fb_data_t *fb_data = (struct fb_data_t *)data;
-
-        /* DON'T DO THAT - buffer overruns are bad */
-        len = sprintf(page, "%s = '%s'\n", 
-                      fb_data->name, fb_data->value);
-
-        return len;
-}
-
-
-static int proc_write_foobar(struct file *file,
-                             const char *buffer,
-                             unsigned long count, 
-                             void *data)
-{
-        int len;
-        struct fb_data_t *fb_data = (struct fb_data_t *)data;
-
-        if(count > FOOBAR_LEN)
-                len = FOOBAR_LEN;
-        else
-                len = count;
-
-        if(copy_from_user(fb_data->value, buffer, len))
-                return -EFAULT;
-
-        fb_data->value[len] = '\0';
-
-        return len;
-}
-
-
-static int __init init_procfs_example(void)
-{
-        int rv = 0;
-
-        /* create directory */
-        example_dir = proc_mkdir(MODULE_NAME, NULL);
-        if(example_dir == NULL) {
-                rv = -ENOMEM;
-                goto out;
-        }
-        /* create jiffies using convenience function */
-        jiffies_file = create_proc_read_entry("jiffies", 
-                                              0444, example_dir, 
-                                              proc_read_jiffies,
-                                              NULL);
-        if(jiffies_file == NULL) {
-                rv  = -ENOMEM;
-                goto no_jiffies;
-        }
-
-        /* create foo and bar files using same callback
-         * functions 
-         */
-        foo_file = create_proc_entry("foo", 0644, example_dir);
-        if(foo_file == NULL) {
-                rv = -ENOMEM;
-                goto no_foo;
-        }
-
-        strcpy(foo_data.name, "foo");
-        strcpy(foo_data.value, "foo");
-        foo_file->data = &foo_data;
-        foo_file->read_proc = proc_read_foobar;
-        foo_file->write_proc = proc_write_foobar;
-                
-        bar_file = create_proc_entry("bar", 0644, example_dir);
-        if(bar_file == NULL) {
-                rv = -ENOMEM;
-                goto no_bar;
-        }
-
-        strcpy(bar_data.name, "bar");
-        strcpy(bar_data.value, "bar");
-        bar_file->data = &bar_data;
-        bar_file->read_proc = proc_read_foobar;
-        bar_file->write_proc = proc_write_foobar;
-                
-        /* create symlink */
-        symlink = proc_symlink("jiffies_too", example_dir, 
-                               "jiffies");
-        if(symlink == NULL) {
-                rv = -ENOMEM;
-                goto no_symlink;
-        }
-
-        /* everything OK */
-        printk(KERN_INFO "%s %s initialised\n",
-               MODULE_NAME, MODULE_VERS);
-        return 0;
-
-no_symlink:
-        remove_proc_entry("bar", example_dir);
-no_bar:
-        remove_proc_entry("foo", example_dir);
-no_foo:
-        remove_proc_entry("jiffies", example_dir);
-no_jiffies:                           
-        remove_proc_entry(MODULE_NAME, NULL);
-out:
-        return rv;
-}
-
-
-static void __exit cleanup_procfs_example(void)
-{
-        remove_proc_entry("jiffies_too", example_dir);
-        remove_proc_entry("bar", example_dir);
-        remove_proc_entry("foo", example_dir);
-        remove_proc_entry("jiffies", example_dir);
-        remove_proc_entry(MODULE_NAME, NULL);
-
-        printk(KERN_INFO "%s %s removed\n",
-               MODULE_NAME, MODULE_VERS);
-}
-
-
-module_init(init_procfs_example);
-module_exit(cleanup_procfs_example);
-
-MODULE_AUTHOR("Erik Mouw");
-MODULE_DESCRIPTION("procfs examples");
-MODULE_LICENSE("GPL");
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
index b0756d0fd579..8bca1d5cec09 100644
--- a/Documentation/DocBook/tracepoint.tmpl
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -86,4 +86,9 @@
 !Iinclude/trace/events/irq.h
   </chapter>
 
+  <chapter id="signal">
+   <title>SIGNAL</title>
+!Iinclude/trace/events/signal.h
+  </chapter>
+
 </book>
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index b1a81d246d58..c65f0ac9b6ee 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -716,6 +716,41 @@ if (-1 == ioctl (fd, &VIDIOC-S-STD;, &amp;std_id)) {
 }
       </programlisting>
     </example>
+  <section id="dv-timings">
+        <title>Digital Video (DV) Timings</title>
+        <para>
+        The video standards discussed so far has been dealing with Analog TV and the
+corresponding video timings. Today there are many more different hardware interfaces
+such as High Definition TV interfaces (HDMI), VGA, DVI connectors etc., that carry
+video signals and there is a need to extend the API to select the video timings
+for these interfaces. Since it is not possible to extend the &v4l2-std-id; due to
+the limited bits available, a new set of IOCTLs is added to set/get video timings at
+the input and output: </para><itemizedlist>
+        <listitem>
+        <para>DV Presets: Digital Video (DV) presets. These are IDs representing a
+video timing at the input/output. Presets are pre-defined timings implemented
+by the hardware according to video standards. A __u32 data type is used to represent
+a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions
+to support as many different presets as needed.</para>
+        </listitem>
+        <listitem>
+        <para>Custom DV Timings: This will allow applications to define more detailed
+custom video timings for the interface. This includes parameters such as width, height,
+polarities, frontporch, backporch etc.
+        </para>
+        </listitem>
+        </itemizedlist>
+        <para>To enumerate and query the attributes of DV presets supported by a device,
+applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset,
+applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the
+&VIDIOC-S-DV-PRESET; ioctl.</para>
+        <para>To set custom DV timings for the device, applications use the
+&VIDIOC-S-DV-TIMINGS; ioctl and to get current custom DV timings they use the
+&VIDIOC-G-DV-TIMINGS; ioctl.</para>
+        <para>Applications can make use of the <xref linkend="input-capabilities" /> and
+<xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the
+video timings for the device.</para>
+        </section>
   </section>
 
   &sub-controls;
diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml
index 4d1902a54d61..b9dbdf9e6d29 100644
--- a/Documentation/DocBook/v4l/compat.xml
+++ b/Documentation/DocBook/v4l/compat.xml
@@ -2291,8 +2291,8 @@ was renamed to <structname id="v4l2-chip-ident-old">v4l2_chip_ident_old</structn
         <listitem>
           <para>New control <constant>V4L2_CID_COLORFX</constant> was added.</para>
         </listitem>
-       </orderedlist>
-     </section>
+      </orderedlist>
+    </section>
     <section>
       <title>V4L2 in Linux 2.6.32</title>
       <orderedlist>
@@ -2322,8 +2322,16 @@ more information.</para>
         <listitem>
           <para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
         </listitem>
-       </orderedlist>
-     </section>
+      </orderedlist>
+    </section>
+    <section>
+      <title>V4L2 in Linux 2.6.33</title>
+      <orderedlist>
+        <listitem>
+          <para>Added support for Digital Video timings in order to support HDTV receivers and transmitters.</para>
+        </listitem>
+      </orderedlist>
+    </section>
    </section>
 
    <section id="other">
diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml
index f492accb691d..f46450610412 100644
--- a/Documentation/DocBook/v4l/controls.xml
+++ b/Documentation/DocBook/v4l/controls.xml
@@ -281,10 +281,28 @@ minimum value disables backlight compensation.</entry>
 <constant>V4L2_COLORFX_SEPIA</constant> (2).</entry>
           </row>
           <row>
+            <entry><constant>V4L2_CID_ROTATE</constant></entry>
+            <entry>integer</entry>
+            <entry>Rotates the image by specified angle. Common angles are 90,
+            270 and 180. Rotating the image to 90 and 270 will reverse the height
+            and width of the display window. It is necessary to set the new height and
+            width of the picture using the &VIDIOC-S-FMT; ioctl according to
+            the rotation angle selected.</entry>
+          </row>
+          <row>
+            <entry><constant>V4L2_CID_BG_COLOR</constant></entry>
+            <entry>integer</entry>
+            <entry>Sets the background color on the current output device.
+            Background color needs to be specified in the RGB24 format. The
+            supplied 32 bit value is interpreted as bits 0-7 Red color information,
+            bits 8-15 Green color information, bits 16-23 Blue color
+            information and bits 24-31 must be zero.</entry>
+          </row>
+          <row>
             <entry><constant>V4L2_CID_LASTP1</constant></entry>
             <entry></entry>
             <entry>End of the predefined control IDs (currently
-<constant>V4L2_CID_COLORFX</constant> + 1).</entry>
+<constant>V4L2_CID_BG_COLOR</constant> + 1).</entry>
           </row>
           <row>
             <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index 7d396a3785f5..885968d6a2fc 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -770,6 +770,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
             <entry>'S920'</entry>
             <entry>YUV 4:2:0 format of the gspca sn9c20x driver.</entry>
           </row>
+          <row id="V4L2-PIX-FMT-STV0680">
+            <entry><constant>V4L2_PIX_FMT_STV0680</constant></entry>
+            <entry>'S680'</entry>
+            <entry>Bayer format of the gspca stv0680 driver.</entry>
+          </row>
           <row id="V4L2-PIX-FMT-WNVA">
             <entry><constant>V4L2_PIX_FMT_WNVA</constant></entry>
             <entry>'WNVA'</entry>
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 937b4157a5d0..060105af49e5 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -74,6 +74,17 @@ Remote Controller chapter.</contrib>
           </address>
         </affiliation>
       </author>
+
+      <author>
+        <firstname>Muralidharan</firstname>
+        <surname>Karicheri</surname>
+        <contrib>Documented the Digital Video timings API.</contrib>
+        <affiliation>
+          <address>
+            <email>m-karicheri2@ti.com</email>
+          </address>
+        </affiliation>
+      </author>
     </authorgroup>
 
     <copyright>
@@ -89,7 +100,7 @@ Remote Controller chapter.</contrib>
       <year>2008</year>
       <year>2009</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
-Rubli, Andy Walls, Mauro Carvalho Chehab</holder>
+Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
     <legalnotice>
     <para>Except when explicitly stated as GPL, programming examples within
@@ -103,6 +114,13 @@ structs, ioctls) must be noted in more detail in the history chapter
 applications. -->
 
       <revision>
+        <revnumber>2.6.33</revnumber>
+        <date>2009-12-03</date>
+        <authorinitials>mk</authorinitials>
+        <revremark>Added documentation for the Digital Video timings API.</revremark>
+      </revision>
+
+      <revision>
         <revnumber>2.6.32</revnumber>
         <date>2009-08-31</date>
         <authorinitials>mcc</authorinitials>
@@ -355,7 +373,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 2.6.32</subtitle>
+ <subtitle>Revision 2.6.33</subtitle>
 
   <chapter id="common">
     &sub-common;
@@ -411,6 +429,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-encoder-cmd;
     &sub-enumaudio;
     &sub-enumaudioout;
+    &sub-enum-dv-presets;
     &sub-enum-fmt;
     &sub-enum-framesizes;
     &sub-enum-frameintervals;
@@ -421,6 +440,8 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-audioout;
     &sub-g-crop;
     &sub-g-ctrl;
+    &sub-g-dv-preset;
+    &sub-g-dv-timings;
     &sub-g-enc-index;
     &sub-g-ext-ctrls;
     &sub-g-fbuf;
@@ -441,6 +462,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-querybuf;
     &sub-querycap;
     &sub-queryctrl;
+    &sub-query-dv-preset;
     &sub-querystd;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml
index 97002060ac4f..068325940658 100644
--- a/Documentation/DocBook/v4l/videodev2.h.xml
+++ b/Documentation/DocBook/v4l/videodev2.h.xml
@@ -363,6 +363,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link>    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
 #define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link>    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
 #define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link>   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link>  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
 
 /*
  *      F O R M A T   E N U M E R A T I O N
@@ -492,7 +493,7 @@ struct <link linkend="v4l2-jpegcompression">v4l2_jpegcompression</link> {
                                  * you do, leave them untouched.
                                  * Inluding less markers will make the
                                  * resulting code smaller, but there will
-                                 * be fewer aplications which can read it.
+                                 * be fewer applications which can read it.
                                  * The presence of the APP and COM marker
                                  * is influenced by APP_len and COM_len
                                  * ONLY, not by this property! */
@@ -565,6 +566,7 @@ struct <link linkend="v4l2-framebuffer">v4l2_framebuffer</link> {
 #define V4L2_FBUF_CAP_LOCAL_ALPHA       0x0010
 #define V4L2_FBUF_CAP_GLOBAL_ALPHA      0x0020
 #define V4L2_FBUF_CAP_LOCAL_INV_ALPHA   0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY     0x0080
 /*  Flags for the 'flags' field. */
 #define V4L2_FBUF_FLAG_PRIMARY          0x0001
 #define V4L2_FBUF_FLAG_OVERLAY          0x0002
@@ -572,6 +574,7 @@ struct <link linkend="v4l2-framebuffer">v4l2_framebuffer</link> {
 #define V4L2_FBUF_FLAG_LOCAL_ALPHA      0x0008
 #define V4L2_FBUF_FLAG_GLOBAL_ALPHA     0x0010
 #define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA  0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY    0x0040
 
 struct <link linkend="v4l2-clip">v4l2_clip</link> {
         struct <link linkend="v4l2-rect">v4l2_rect</link>        c;
@@ -731,6 +734,99 @@ struct <link linkend="v4l2-standard">v4l2_standard</link> {
 };
 
 /*
+ *      V I D E O       T I M I N G S   D V     P R E S E T
+ */
+struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link> {
+        __u32   preset;
+        __u32   reserved[4];
+};
+
+/*
+ *      D V     P R E S E T S   E N U M E R A T I O N
+ */
+struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link> {
+        __u32   index;
+        __u32   preset;
+        __u8    name[32]; /* Name of the preset timing */
+        __u32   width;
+        __u32   height;
+        __u32   reserved[4];
+};
+
+/*
+ *      D V     P R E S E T     V A L U E S
+ */
+#define         V4L2_DV_INVALID         0
+#define         V4L2_DV_480P59_94       1 /* BT.1362 */
+#define         V4L2_DV_576P50          2 /* BT.1362 */
+#define         V4L2_DV_720P24          3 /* SMPTE 296M */
+#define         V4L2_DV_720P25          4 /* SMPTE 296M */
+#define         V4L2_DV_720P30          5 /* SMPTE 296M */
+#define         V4L2_DV_720P50          6 /* SMPTE 296M */
+#define         V4L2_DV_720P59_94       7 /* SMPTE 274M */
+#define         V4L2_DV_720P60          8 /* SMPTE 274M/296M */
+#define         V4L2_DV_1080I29_97      9 /* BT.1120/ SMPTE 274M */
+#define         V4L2_DV_1080I30         10 /* BT.1120/ SMPTE 274M */
+#define         V4L2_DV_1080I25         11 /* BT.1120 */
+#define         V4L2_DV_1080I50         12 /* SMPTE 296M */
+#define         V4L2_DV_1080I60         13 /* SMPTE 296M */
+#define         V4L2_DV_1080P24         14 /* SMPTE 296M */
+#define         V4L2_DV_1080P25         15 /* SMPTE 296M */
+#define         V4L2_DV_1080P30         16 /* SMPTE 296M */
+#define         V4L2_DV_1080P50         17 /* BT.1120 */
+#define         V4L2_DV_1080P60         18 /* BT.1120 */
+
+/*
+ *      D V     B T     T I M I N G S
+ */
+
+/* BT.656/BT.1120 timing data */
+struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link> {
+        __u32   width;          /* width in pixels */
+        __u32   height;         /* height in lines */
+        __u32   interlaced;     /* Interlaced or progressive */
+        __u32   polarities;     /* Positive or negative polarity */
+        __u64   pixelclock;     /* Pixel clock in HZ. Ex. 74.25MHz-&gt;74250000 */
+        __u32   hfrontporch;    /* Horizpontal front porch in pixels */
+        __u32   hsync;          /* Horizontal Sync length in pixels */
+        __u32   hbackporch;     /* Horizontal back porch in pixels */
+        __u32   vfrontporch;    /* Vertical front porch in pixels */
+        __u32   vsync;          /* Vertical Sync length in lines */
+        __u32   vbackporch;     /* Vertical back porch in lines */
+        __u32   il_vfrontporch; /* Vertical front porch for bottom field of
+                                 * interlaced field formats
+                                 */
+        __u32   il_vsync;       /* Vertical sync length for bottom field of
+                                 * interlaced field formats
+                                 */
+        __u32   il_vbackporch;  /* Vertical back porch for bottom field of
+                                 * interlaced field formats
+                                 */
+        __u32   reserved[16];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define V4L2_DV_PROGRESSIVE     0
+#define V4L2_DV_INTERLACED      1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL   0x00000001
+#define V4L2_DV_HSYNC_POS_POL   0x00000002
+
+
+/* DV timings */
+struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link> {
+        __u32 type;
+        union {
+                struct <link linkend="v4l2-bt-timings">v4l2_bt_timings</link>  bt;
+                __u32   reserved[32];
+        };
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120     0       /* BT.656/1120 timing type */
+
+/*
  *      V I D E O   I N P U T S
  */
 struct <link linkend="v4l2-input">v4l2_input</link> {
@@ -741,7 +837,8 @@ struct <link linkend="v4l2-input">v4l2_input</link> {
         __u32        tuner;             /*  Associated tuner */
         v4l2_std_id  std;
         __u32        status;
-        __u32        reserved[4];
+        __u32        capabilities;
+        __u32        reserved[3];
 };
 
 /*  Values for the 'type' field */
@@ -772,6 +869,11 @@ struct <link linkend="v4l2-input">v4l2_input</link> {
 #define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
 #define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
 
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS             0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS      0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_STD                 0x00000004 /* Supports S_STD */
+
 /*
  *      V I D E O   O U T P U T S
  */
@@ -782,13 +884,19 @@ struct <link linkend="v4l2-output">v4l2_output</link> {
         __u32        audioset;          /*  Associated audios (bitfield) */
         __u32        modulator;         /*  Associated modulator */
         v4l2_std_id  std;
-        __u32        reserved[4];
+        __u32        capabilities;
+        __u32        reserved[3];
 };
 /*  Values for the 'type' field */
 #define V4L2_OUTPUT_TYPE_MODULATOR              1
 #define V4L2_OUTPUT_TYPE_ANALOG                 2
 #define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY       3
 
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS            0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS     0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_STD                0x00000004 /* Supports S_STD */
+
 /*
  *      C O N T R O L S
  */
@@ -914,8 +1022,10 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> {
 #define V4L2_CID_AUTOBRIGHTNESS                 (V4L2_CID_BASE+32)
 #define V4L2_CID_BAND_STOP_FILTER               (V4L2_CID_BASE+33)
 
+#define V4L2_CID_ROTATE                         (V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR                       (V4L2_CID_BASE+35)
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+34)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+36)
 
 /*  MPEG-class control IDs defined by V4L2 */
 #define V4L2_CID_MPEG_BASE                      (V4L2_CTRL_CLASS_MPEG | 0x900)
@@ -1621,6 +1731,13 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
 #endif
 
 #define VIDIOC_S_HW_FREQ_SEEK    _IOW('V', 82, struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link>)
+#define VIDIOC_ENUM_DV_PRESETS  _IOWR('V', 83, struct <link linkend="v4l2-dv-enum-preset">v4l2_dv_enum_preset</link>)
+#define VIDIOC_S_DV_PRESET      _IOWR('V', 84, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
+#define VIDIOC_G_DV_PRESET      _IOWR('V', 85, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
+#define VIDIOC_QUERY_DV_PRESET  _IOR('V',  86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
+#define VIDIOC_S_DV_TIMINGS     _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
+#define VIDIOC_G_DV_TIMINGS     _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
+
 /* Reminder: when adding new ioctls please add support for them to
    drivers/media/video/v4l2-compat-ioctl32.c as well! */
 
diff --git a/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml
new file mode 100644
index 000000000000..1d31427edd1b
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-enum-dv-presets.xml
@@ -0,0 +1,238 @@
+<refentry id="vidioc-enum-dv-presets">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_ENUM_DV_PRESETS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_ENUM_DV_PRESETS</refname>
+    <refpurpose>Enumerate supported Digital Video presets</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+        <funcdef>int <function>ioctl</function></funcdef>
+        <paramdef>int <parameter>fd</parameter></paramdef>
+        <paramdef>int <parameter>request</parameter></paramdef>
+        <paramdef>struct v4l2_dv_enum_preset *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+        <term><parameter>fd</parameter></term>
+        <listitem>
+          <para>&fd;</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>request</parameter></term>
+        <listitem>
+          <para>VIDIOC_ENUM_DV_PRESETS</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>argp</parameter></term>
+        <listitem>
+          <para></para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the attributes of a DV preset, applications initialize the
+<structfield>index</structfield> field and zero the reserved array of &v4l2-dv-enum-preset;
+and call the <constant>VIDIOC_ENUM_DV_PRESETS</constant> ioctl with a pointer to this
+structure. Drivers fill the rest of the structure or return an
+&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported,
+applications shall begin at index zero, incrementing by one until the
+driver returns <errorcode>EINVAL</errorcode>. Drivers may enumerate a
+different set of DV presets after switching the video input or
+output.</para>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-enum-preset">
+      <title>struct <structname>v4l2_dv_enum_presets</structname></title>
+      <tgroup cols="3">
+        &cs-str;
+        <tbody valign="top">
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>index</structfield></entry>
+            <entry>Number of the DV preset, set by the
+application.</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>preset</structfield></entry>
+            <entry>This field identifies one of the DV preset values listed in <xref linkend="v4l2-dv-presets-vals"/>.</entry>
+          </row>
+          <row>
+            <entry>__u8</entry>
+            <entry><structfield>name</structfield>[24]</entry>
+            <entry>Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is
+intended for the user.</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>width</structfield></entry>
+            <entry>Width of the active video in pixels for the DV preset.</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>height</structfield></entry>
+            <entry>Height of the active video in lines for the DV preset.</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>reserved</structfield>[4]</entry>
+            <entry>Reserved for future extensions. Drivers must set the array to zero.</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-presets-vals">
+      <title>struct <structname>DV Presets</structname></title>
+      <tgroup cols="3">
+        &cs-str;
+        <tbody valign="top">
+          <row>
+            <entry>Preset</entry>
+            <entry>Preset value</entry>
+            <entry>Description</entry>
+          </row>
+          <row>
+            <entry></entry>
+            <entry></entry>
+            <entry></entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_INVALID</entry>
+            <entry>0</entry>
+            <entry>Invalid preset value.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_480P59_94</entry>
+            <entry>1</entry>
+            <entry>720x480 progressive video at 59.94 fps as per BT.1362.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_576P50</entry>
+            <entry>2</entry>
+            <entry>720x576 progressive video at 50 fps as per BT.1362.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_720P24</entry>
+            <entry>3</entry>
+            <entry>1280x720 progressive video at 24 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_720P25</entry>
+            <entry>4</entry>
+            <entry>1280x720 progressive video at 25 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_720P30</entry>
+            <entry>5</entry>
+            <entry>1280x720 progressive video at 30 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_720P50</entry>
+            <entry>6</entry>
+            <entry>1280x720 progressive video at 50 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_720P59_94</entry>
+            <entry>7</entry>
+            <entry>1280x720 progressive video at 59.94 fps as per SMPTE 274M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_720P60</entry>
+            <entry>8</entry>
+            <entry>1280x720 progressive video at 60 fps as per SMPTE 274M/296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080I29_97</entry>
+            <entry>9</entry>
+            <entry>1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080I30</entry>
+            <entry>10</entry>
+            <entry>1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080I25</entry>
+            <entry>11</entry>
+            <entry>1920x1080 interlaced video at 25 fps as per BT.1120.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080I50</entry>
+            <entry>12</entry>
+            <entry>1920x1080 interlaced video at 50 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080I60</entry>
+            <entry>13</entry>
+            <entry>1920x1080 interlaced video at 60 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080P24</entry>
+            <entry>14</entry>
+            <entry>1920x1080 progressive video at 24 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080P25</entry>
+            <entry>15</entry>
+            <entry>1920x1080 progressive video at 25 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080P30</entry>
+            <entry>16</entry>
+            <entry>1920x1080 progressive video at 30 fps as per SMPTE 296M.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080P50</entry>
+            <entry>17</entry>
+            <entry>1920x1080 progressive video at 50 fps as per BT.1120.</entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_1080P60</entry>
+            <entry>18</entry>
+            <entry>1920x1080 progressive video at 60 fps as per BT.1120.</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+        <term><errorcode>EINVAL</errorcode></term>
+        <listitem>
+          <para>The &v4l2-dv-enum-preset; <structfield>index</structfield>
+is out of bounds.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-enuminput.xml b/Documentation/DocBook/v4l/vidioc-enuminput.xml
index 414856b82473..71b868e2fb8f 100644
--- a/Documentation/DocBook/v4l/vidioc-enuminput.xml
+++ b/Documentation/DocBook/v4l/vidioc-enuminput.xml
@@ -124,7 +124,13 @@ current input.</entry>
           </row>
           <row>
             <entry>__u32</entry>
-            <entry><structfield>reserved</structfield>[4]</entry>
+            <entry><structfield>capabilities</structfield></entry>
+            <entry>This field provides capabilities for the
+input. See <xref linkend="input-capabilities" /> for flags.</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>reserved</structfield>[3]</entry>
             <entry>Reserved for future extensions. Drivers must set
 the array to zero.</entry>
           </row>
@@ -261,6 +267,34 @@ flag is set Macrovision has been detected.</entry>
         </tbody>
       </tgroup>
     </table>
+
+    <!-- Capability flags based on video timings RFC by Muralidharan
+Karicheri, titled RFC (v1.2): V4L - Support for video timings at the
+input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
+        -->
+    <table frame="none" pgwide="1" id="input-capabilities">
+      <title>Input capabilities</title>
+      <tgroup cols="3">
+        &cs-def;
+        <tbody valign="top">
+          <row>
+            <entry><constant>V4L2_IN_CAP_PRESETS</constant></entry>
+            <entry>0x00000001</entry>
+            <entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
+          </row>
+          <row>
+            <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
+            <entry>0x00000002</entry>
+            <entry>This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
+          </row>
+          <row>
+            <entry><constant>V4L2_IN_CAP_STD</constant></entry>
+            <entry>0x00000004</entry>
+            <entry>This input supports setting the TV standard by using VIDIOC_S_STD.</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
   </refsect1>
 
   <refsect1>
diff --git a/Documentation/DocBook/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/v4l/vidioc-enumoutput.xml
index e8d16dcd50cf..a281d26a195f 100644
--- a/Documentation/DocBook/v4l/vidioc-enumoutput.xml
+++ b/Documentation/DocBook/v4l/vidioc-enumoutput.xml
@@ -114,7 +114,13 @@ details on video standards and how to switch see <xref
           </row>
           <row>
             <entry>__u32</entry>
-            <entry><structfield>reserved</structfield>[4]</entry>
+            <entry><structfield>capabilities</structfield></entry>
+            <entry>This field provides capabilities for the
+output. See <xref linkend="output-capabilities" /> for flags.</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>reserved</structfield>[3]</entry>
             <entry>Reserved for future extensions. Drivers must set
 the array to zero.</entry>
           </row>
@@ -147,6 +153,34 @@ CVBS, S-Video, RGB.</entry>
       </tgroup>
     </table>
 
+    <!-- Capabilities flags based on video timings RFC by Muralidharan
+Karicheri, titled RFC (v1.2): V4L - Support for video timings at the
+input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
+        -->
+    <table frame="none" pgwide="1" id="output-capabilities">
+      <title>Output capabilities</title>
+      <tgroup cols="3">
+        &cs-def;
+        <tbody valign="top">
+          <row>
+            <entry><constant>V4L2_OUT_CAP_PRESETS</constant></entry>
+            <entry>0x00000001</entry>
+            <entry>This output supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
+          </row>
+          <row>
+            <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
+            <entry>0x00000002</entry>
+            <entry>This output supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
+          </row>
+          <row>
+            <entry><constant>V4L2_OUT_CAP_STD</constant></entry>
+            <entry>0x00000004</entry>
+            <entry>This output supports setting the TV standard by using VIDIOC_S_STD.</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+
   </refsect1>
   <refsect1>
     &return-value;
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
new file mode 100644
index 000000000000..3c6784e132f3
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
@@ -0,0 +1,111 @@
+<refentry id="vidioc-g-dv-preset">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_G_DV_PRESET</refname>
+    <refname>VIDIOC_S_DV_PRESET</refname>
+    <refpurpose>Query or select the DV preset of the current input or output</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+        <funcdef>int <function>ioctl</function></funcdef>
+        <paramdef>int <parameter>fd</parameter></paramdef>
+        <paramdef>int <parameter>request</parameter></paramdef>
+        <paramdef>&v4l2-dv-preset;
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+        <term><parameter>fd</parameter></term>
+        <listitem>
+          <para>&fd;</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>request</parameter></term>
+        <listitem>
+          <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>argp</parameter></term>
+        <listitem>
+          <para></para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+    <para>To query and select the current DV preset, applications
+use the <constant>VIDIOC_G_DV_PRESET</constant> and <constant>VIDIOC_S_DV_PRESET</constant>
+ioctls which take a pointer to a &v4l2-dv-preset; type as argument.
+Applications must zero the reserved array in &v4l2-dv-preset;.
+<constant>VIDIOC_G_DV_PRESET</constant> returns a dv preset in the field
+<structfield>preset</structfield> of &v4l2-dv-preset;.</para>
+
+    <para><constant>VIDIOC_S_DV_PRESET</constant> accepts a pointer to a &v4l2-dv-preset;
+that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;.
+If the preset is not supported, it returns an &EINVAL; </para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+        <term><errorcode>EINVAL</errorcode></term>
+        <listitem>
+          <para>This ioctl is not supported, or the
+<constant>VIDIOC_S_DV_PRESET</constant>,<constant>VIDIOC_S_DV_PRESET</constant> parameter was unsuitable.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><errorcode>EBUSY</errorcode></term>
+        <listitem>
+          <para>The device is busy and therefore can not change the preset.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-preset">
+      <title>struct <structname>v4l2_dv_preset</structname></title>
+      <tgroup cols="3">
+        &cs-str;
+        <tbody valign="top">
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>preset</structfield></entry>
+            <entry>Preset value to represent the digital video timings</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>reserved[4]</structfield></entry>
+            <entry>Reserved fields for future use</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
new file mode 100644
index 000000000000..ecc19576bb8f
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
@@ -0,0 +1,224 @@
+<refentry id="vidioc-g-dv-timings">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_G_DV_TIMINGS</refname>
+    <refname>VIDIOC_S_DV_TIMINGS</refname>
+    <refpurpose>Get or set custom DV timings for input or output</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+        <funcdef>int <function>ioctl</function></funcdef>
+        <paramdef>int <parameter>fd</parameter></paramdef>
+        <paramdef>int <parameter>request</parameter></paramdef>
+        <paramdef>&v4l2-dv-timings;
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+        <term><parameter>fd</parameter></term>
+        <listitem>
+          <para>&fd;</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>request</parameter></term>
+        <listitem>
+          <para>VIDIOC_G_DV_TIMINGS, VIDIOC_S_DV_TIMINGS</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>argp</parameter></term>
+        <listitem>
+          <para></para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+    <para>To set custom DV timings for the input or output, applications use the
+<constant>VIDIOC_S_DV_TIMINGS</constant> ioctl and to get the current custom timings,
+applications use the <constant>VIDIOC_G_DV_TIMINGS</constant> ioctl. The detailed timing
+information is filled in using the structure &v4l2-dv-timings;. These ioctls take
+a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not supported
+or the timing values are not correct, the driver returns &EINVAL;.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+        <term><errorcode>EINVAL</errorcode></term>
+        <listitem>
+          <para>This ioctl is not supported, or the
+<constant>VIDIOC_S_DV_TIMINGS</constant> parameter was unsuitable.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><errorcode>EBUSY</errorcode></term>
+        <listitem>
+          <para>The device is busy and therefore can not change the timings.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+
+    <table pgwide="1" frame="none" id="v4l2-bt-timings">
+      <title>struct <structname>v4l2_bt_timings</structname></title>
+      <tgroup cols="3">
+        &cs-str;
+        <tbody valign="top">
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>width</structfield></entry>
+            <entry>Width of the active video in pixels</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>height</structfield></entry>
+            <entry>Height of the active video in lines</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>interlaced</structfield></entry>
+            <entry>Progressive (0) or interlaced (1)</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>polarities</structfield></entry>
+            <entry>This is a bit mask that defines polarities of sync signals.
+bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_HSYNC_POS_POL) is for horizontal sync polarity. If the bit is set
+(1) it is positive polarity and if is cleared (0), it is negative polarity.</entry>
+          </row>
+          <row>
+            <entry>__u64</entry>
+            <entry><structfield>pixelclock</structfield></entry>
+            <entry>Pixel clock in Hz. Ex. 74.25MHz->74250000</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>hfrontporch</structfield></entry>
+            <entry>Horizontal front porch in pixels</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>hsync</structfield></entry>
+            <entry>Horizontal sync length in pixels</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>hbackporch</structfield></entry>
+            <entry>Horizontal back porch in pixels</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>vfrontporch</structfield></entry>
+            <entry>Vertical front porch in lines</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>vsync</structfield></entry>
+            <entry>Vertical sync length in lines</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>vbackporch</structfield></entry>
+            <entry>Vertical back porch in lines</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>il_vfrontporch</structfield></entry>
+            <entry>Vertical front porch in lines for bottom field of interlaced field formats</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>il_vsync</structfield></entry>
+            <entry>Vertical sync length in lines for bottom field of interlaced field formats</entry>
+          </row>
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>il_vbackporch</structfield></entry>
+            <entry>Vertical back porch in lines for bottom field of interlaced field formats</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-dv-timings">
+      <title>struct <structname>v4l2_dv_timings</structname></title>
+      <tgroup cols="4">
+        &cs-str;
+        <tbody valign="top">
+          <row>
+            <entry>__u32</entry>
+            <entry><structfield>type</structfield></entry>
+            <entry></entry>
+            <entry>Type of DV timings as listed in <xref linkend="dv-timing-types"/>.</entry>
+          </row>
+          <row>
+            <entry>union</entry>
+            <entry><structfield></structfield></entry>
+            <entry></entry>
+          </row>
+          <row>
+            <entry></entry>
+            <entry>&v4l2-bt-timings;</entry>
+            <entry><structfield>bt</structfield></entry>
+            <entry>Timings defined by BT.656/1120 specifications</entry>
+          </row>
+          <row>
+            <entry></entry>
+            <entry>__u32</entry>
+            <entry><structfield>reserved</structfield>[32]</entry>
+            <entry></entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="dv-timing-types">
+      <title>DV Timing types</title>
+      <tgroup cols="3">
+        &cs-str;
+        <tbody valign="top">
+          <row>
+            <entry>Timing type</entry>
+            <entry>value</entry>
+            <entry>Description</entry>
+          </row>
+          <row>
+            <entry></entry>
+            <entry></entry>
+            <entry></entry>
+          </row>
+          <row>
+            <entry>V4L2_DV_BT_656_1120</entry>
+            <entry>0</entry>
+            <entry>BT.656/1120 timings</entry>
+          </row>
+        </tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
index f7017062656e..e7dda4822f04 100644
--- a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
@@ -336,6 +336,13 @@ alpha value. Alpha blending makes no sense for destructive overlays.</entry>
 inverted alpha channel of the framebuffer or VGA signal. Alpha
 blending makes no sense for destructive overlays.</entry>
           </row>
+          <row>
+            <entry><constant>V4L2_FBUF_CAP_SRC_CHROMAKEY</constant></entry>
+            <entry>0x0080</entry>
+            <entry>The device supports Source Chroma-keying. Framebuffer pixels
+with the chroma-key colors are replaced by video pixels, which is exactly opposite of
+<constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry>
+          </row>
         </tbody>
       </tgroup>
     </table>
@@ -411,6 +418,16 @@ images, but with an inverted alpha value. The blend function is:
 output = framebuffer pixel * (1 - alpha) + video pixel * alpha. The
 actual alpha depth depends on the framebuffer pixel format.</entry>
           </row>
+          <row>
+            <entry><constant>V4L2_FBUF_FLAG_SRC_CHROMAKEY</constant></entry>
+            <entry>0x0040</entry>
+            <entry>Use source chroma-keying. The source chroma-key color is
+determined by the <structfield>chromakey</structfield> field of
+&v4l2-window; and negotiated with the &VIDIOC-S-FMT; ioctl, see <xref
+linkend="overlay" /> and <xref linkend="osd" />.
+Both chroma-keying are mutual exclusive to each other, so same
+<structfield>chromakey</structfield> field of &v4l2-window; is being used.</entry>
+          </row>
         </tbody>
       </tgroup>
     </table>
diff --git a/Documentation/DocBook/v4l/vidioc-g-std.xml b/Documentation/DocBook/v4l/vidioc-g-std.xml
index b6f5d267e856..912f8513e5da 100644
--- a/Documentation/DocBook/v4l/vidioc-g-std.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-std.xml
@@ -86,6 +86,12 @@ standards.</para>
 <constant>VIDIOC_S_STD</constant> parameter was unsuitable.</para>
         </listitem>
       </varlistentry>
+      <varlistentry>
+        <term><errorcode>EBUSY</errorcode></term>
+        <listitem>
+          <para>The device is busy and therefore can not change the standard</para>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
new file mode 100644
index 000000000000..87e4f0f6151c
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -0,0 +1,85 @@
+<refentry id="vidioc-query-dv-preset">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_QUERY_DV_PRESET</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_QUERY_DV_PRESET</refname>
+    <refpurpose>Sense the DV preset received by the current
+input</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+        <funcdef>int <function>ioctl</function></funcdef>
+        <paramdef>int <parameter>fd</parameter></paramdef>
+        <paramdef>int <parameter>request</parameter></paramdef>
+        <paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+        <varlistentry>
+        <term><parameter>fd</parameter></term>
+        <listitem>
+          <para>&fd;</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>request</parameter></term>
+        <listitem>
+          <para>VIDIOC_QUERY_DV_PRESET</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><parameter>argp</parameter></term>
+        <listitem>
+          <para></para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>The hardware may be able to detect the current DV preset
+automatically, similar to sensing the video standard. To do so, applications
+call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
+&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
+returned in the preset field of &v4l2-dv-preset;. When detection is not
+possible or fails, the value V4L2_DV_INVALID is returned.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+    <variablelist>
+      <varlistentry>
+        <term><errorcode>EINVAL</errorcode></term>
+        <listitem>
+          <para>This ioctl is not supported.</para>
+        </listitem>
+    </varlistentry>
+      <varlistentry>
+        <term><errorcode>EBUSY</errorcode></term>
+        <listitem>
+          <para>The device is busy and therefore can not sense the preset</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-querystd.xml b/Documentation/DocBook/v4l/vidioc-querystd.xml
index b5a7ff934486..1a9e60393091 100644
--- a/Documentation/DocBook/v4l/vidioc-querystd.xml
+++ b/Documentation/DocBook/v4l/vidioc-querystd.xml
@@ -70,6 +70,12 @@ current video input or output.</para>
           <para>This ioctl is not supported.</para>
         </listitem>
       </varlistentry>
+      <varlistentry>
+        <term><errorcode>EBUSY</errorcode></term>
+        <listitem>
+          <para>The device is busy and therefore can not detect the standard</para>
+        </listitem>
+      </varlistentry>
     </variablelist>
   </refsect1>
 </refentry>
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 7a2e0e98986a..0d0f7b4d4b1a 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -5318,7 +5318,7 @@ struct _snd_pcm_runtime {
       pages of the given size and map them onto the virtually contiguous
       memory.  The virtual pointer is addressed in runtime-&gt;dma_area.
       The physical address (runtime-&gt;dma_addr) is set to zero,
-      because the buffer is physically non-contigous.
+      because the buffer is physically non-contiguous.
       The physical address table is set up in sgbuf-&gt;table.
       You can get the physical address at a certain offset via
       <function>snd_pcm_sgbuf_get_addr()</function>. 
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 187bbf10c923..8608fd85e921 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -1,185 +1,10 @@
 CONFIG_RCU_TRACE debugfs Files and Formats
 
 
-The rcupreempt and rcutree implementations of RCU provide debugfs trace
-output that summarizes counters and state.  This information is useful for
-debugging RCU itself, and can sometimes also help to debug abuses of RCU.
-Note that the rcuclassic implementation of RCU does not provide debugfs
-trace output.
-
-The following sections describe the debugfs files and formats for
-preemptable RCU (rcupreempt) and hierarchical RCU (rcutree).
-
-
-Preemptable RCU debugfs Files and Formats
-
-This implementation of RCU provides three debugfs files under the
-top-level directory RCU: rcu/rcuctrs (which displays the per-CPU
-counters used by preemptable RCU) rcu/rcugp (which displays grace-period
-counters), and rcu/rcustats (which internal counters for debugging RCU).
-
-The output of "cat rcu/rcuctrs" looks as follows:
-
-CPU last cur F M
-  0    5  -5 0 0
-  1   -1   0 0 0
-  2    0   1 0 0
-  3    0   1 0 0
-  4    0   1 0 0
-  5    0   1 0 0
-  6    0   2 0 0
-  7    0  -1 0 0
-  8    0   1 0 0
-ggp = 26226, state = waitzero
-
-The per-CPU fields are as follows:
-
-o       "CPU" gives the CPU number.  Offline CPUs are not displayed.
-
-o       "last" gives the value of the counter that is being decremented
-        for the current grace period phase.  In the example above,
-        the counters sum to 4, indicating that there are still four
-        RCU read-side critical sections still running that started
-        before the last counter flip.
-
-o       "cur" gives the value of the counter that is currently being
-        both incremented (by rcu_read_lock()) and decremented (by
-        rcu_read_unlock()).  In the example above, the counters sum to
-        1, indicating that there is only one RCU read-side critical section
-        still running that started after the last counter flip.
-
-o       "F" indicates whether RCU is waiting for this CPU to acknowledge
-        a counter flip.  In the above example, RCU is not waiting on any,
-        which is consistent with the state being "waitzero" rather than
-        "waitack".
-
-o       "M" indicates whether RCU is waiting for this CPU to execute a
-        memory barrier.  In the above example, RCU is not waiting on any,
-        which is consistent with the state being "waitzero" rather than
-        "waitmb".
-
-o       "ggp" is the global grace-period counter.
-
-o       "state" is the RCU state, which can be one of the following:
-
-        o       "idle": there is no grace period in progress.
-
-        o       "waitack": RCU just incremented the global grace-period
-                counter, which has the effect of reversing the roles of
-                the "last" and "cur" counters above, and is waiting for
-                all the CPUs to acknowledge the flip.  Once the flip has
-                been acknowledged, CPUs will no longer be incrementing
-                what are now the "last" counters, so that their sum will
-                decrease monotonically down to zero.
-
-        o       "waitzero": RCU is waiting for the sum of the "last" counters
-                to decrease to zero.
-
-        o       "waitmb": RCU is waiting for each CPU to execute a memory
-                barrier, which ensures that instructions from a given CPU's
-                last RCU read-side critical section cannot be reordered
-                with instructions following the memory-barrier instruction.
-
-The output of "cat rcu/rcugp" looks as follows:
-
-oldggp=48870  newggp=48873
-
-Note that reading from this file provokes a synchronize_rcu().  The
-"oldggp" value is that of "ggp" from rcu/rcuctrs above, taken before
-executing the synchronize_rcu(), and the "newggp" value is also the
-"ggp" value, but taken after the synchronize_rcu() command returns.
-
-
-The output of "cat rcu/rcugp" looks as follows:
-
-na=1337955 nl=40 wa=1337915 wl=44 da=1337871 dl=0 dr=1337871 di=1337871
-1=50989 e1=6138 i1=49722 ie1=82 g1=49640 a1=315203 ae1=265563 a2=49640
-z1=1401244 ze1=1351605 z2=49639 m1=5661253 me1=5611614 m2=49639
-
-These are counters tracking internal preemptable-RCU events, however,
-some of them may be useful for debugging algorithms using RCU.  In
-particular, the "nl", "wl", and "dl" values track the number of RCU
-callbacks in various states.  The fields are as follows:
-
-o       "na" is the total number of RCU callbacks that have been enqueued
-        since boot.
-
-o       "nl" is the number of RCU callbacks waiting for the previous
-        grace period to end so that they can start waiting on the next
-        grace period.
-
-o       "wa" is the total number of RCU callbacks that have started waiting
-        for a grace period since boot.  "na" should be roughly equal to
-        "nl" plus "wa".
-
-o       "wl" is the number of RCU callbacks currently waiting for their
-        grace period to end.
-
-o       "da" is the total number of RCU callbacks whose grace periods
-        have completed since boot.  "wa" should be roughly equal to
-        "wl" plus "da".
-
-o       "dr" is the total number of RCU callbacks that have been removed
-        from the list of callbacks ready to invoke.  "dr" should be roughly
-        equal to "da".
-
-o       "di" is the total number of RCU callbacks that have been invoked
-        since boot.  "di" should be roughly equal to "da", though some
-        early versions of preemptable RCU had a bug so that only the
-        last CPU's count of invocations was displayed, rather than the
-        sum of all CPU's counts.
-
-o       "1" is the number of calls to rcu_try_flip().  This should be
-        roughly equal to the sum of "e1", "i1", "a1", "z1", and "m1"
-        described below.  In other words, the number of times that
-        the state machine is visited should be equal to the sum of the
-        number of times that each state is visited plus the number of
-        times that the state-machine lock acquisition failed.
-
-o       "e1" is the number of times that rcu_try_flip() was unable to
-        acquire the fliplock.
-
-o       "i1" is the number of calls to rcu_try_flip_idle().
-
-o       "ie1" is the number of times rcu_try_flip_idle() exited early
-        due to the calling CPU having no work for RCU.
-
-o       "g1" is the number of times that rcu_try_flip_idle() decided
-        to start a new grace period.  "i1" should be roughly equal to
-        "ie1" plus "g1".
-
-o       "a1" is the number of calls to rcu_try_flip_waitack().
-
-o       "ae1" is the number of times that rcu_try_flip_waitack() found
-        that at least one CPU had not yet acknowledge the new grace period
-        (AKA "counter flip").
-
-o       "a2" is the number of time rcu_try_flip_waitack() found that
-        all CPUs had acknowledged.  "a1" should be roughly equal to
-        "ae1" plus "a2".  (This particular output was collected on
-        a 128-CPU machine, hence the smaller-than-usual fraction of
-        calls to rcu_try_flip_waitack() finding all CPUs having already
-        acknowledged.)
-
-o       "z1" is the number of calls to rcu_try_flip_waitzero().
-
-o       "ze1" is the number of times that rcu_try_flip_waitzero() found
-        that not all of the old RCU read-side critical sections had
-        completed.
-
-o       "z2" is the number of times that rcu_try_flip_waitzero() finds
-        the sum of the counters equal to zero, in other words, that
-        all of the old RCU read-side critical sections had completed.
-        The value of "z1" should be roughly equal to "ze1" plus
-        "z2".
-
-o       "m1" is the number of calls to rcu_try_flip_waitmb().
-
-o       "me1" is the number of times that rcu_try_flip_waitmb() finds
-        that at least one CPU has not yet executed a memory barrier.
-
-o       "m2" is the number of times that rcu_try_flip_waitmb() finds that
-        all CPUs have executed a memory barrier.
+The rcutree implementation of RCU provides debugfs trace output that
+summarizes counters and state.  This information is useful for debugging
+RCU itself, and can sometimes also help to debug abuses of RCU.
+The following sections describe the debugfs files and formats.
 
 
 Hierarchical RCU debugfs Files and Formats
@@ -210,9 +35,10 @@ rcu_bh:
   6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
   7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
-The first section lists the rcu_data structures for rcu, the second for
-rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
-The fields are as follows:
+The first section lists the rcu_data structures for rcu_sched, the second
+for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
+additional section for rcu_preempt.  Each section has one line per CPU,
+or eight for this 8-CPU system.  The fields are as follows:
 
 o       The number at the beginning of each line is the CPU number.
         CPUs numbers followed by an exclamation mark are offline,
@@ -223,9 +49,9 @@ o	The number at the beginning of each line is the CPU number.
 
 o       "c" is the count of grace periods that this CPU believes have
         completed.  CPUs in dynticks idle mode may lag quite a ways
-        behind, for example, CPU 4 under "rcu" above, which has slept
-        through the past 25 RCU grace periods.  It is not unusual to
-        see CPUs lagging by thousands of grace periods.
+        behind, for example, CPU 4 under "rcu_sched" above, which has
+        slept through the past 25 RCU grace periods.  It is not unusual
+        to see CPUs lagging by thousands of grace periods.
 
 o       "g" is the count of grace periods that this CPU believes have
         started.  Again, CPUs in dynticks idle mode may lag behind.
@@ -308,8 +134,10 @@ The output of "cat rcu/rcugp" looks as follows:
 rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
-Again, this output is for both "rcu" and "rcu_bh".  The fields are
-taken from the rcu_state structure, and are as follows:
+Again, this output is for both "rcu_sched" and "rcu_bh".  Note that
+kernels built with CONFIG_TREE_PREEMPT_RCU will have an additional
+"rcu_preempt" line.  The fields are taken from the rcu_state structure,
+and are as follows:
 
 o       "completed" is the number of grace periods that have completed.
         It is comparable to the "c" field from rcu/rcudata in that a
@@ -324,23 +152,24 @@ o	"gpnum" is the number of grace periods that have started.  It is
         If these two fields are equal (as they are for "rcu_bh" above),
         then there is no grace period in progress, in other words, RCU
         is idle.  On the other hand, if the two fields differ (as they
-        do for "rcu" above), then an RCU grace period is in progress.
+        do for "rcu_sched" above), then an RCU grace period is in progress.
 
 
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
-c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 0:127 ^0    
-3/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-3/3f 0:5 ^0    2/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3    
+c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0
+1/1 .>. 0:127 ^0    
+3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
 rcu_bh:
-c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 0:127 ^0    
-0/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-0/3f 0:5 ^0    0/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3
+c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0
+0/1 .>. 0:127 ^0    
+0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
 
-This is once again split into "rcu" and "rcu_bh" portions.  The fields are
-as follows:
+This is once again split into "rcu_sched" and "rcu_bh" portions,
+and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o       "c" is exactly the same as "completed" under rcu/rcugp.
 
@@ -372,6 +201,11 @@ o	"fqlh" is the number of calls to force_quiescent_state() that
         exited immediately (without even being counted in nfqs above)
         due to contention on ->fqslock.
 
+o       "oqlen" is the number of callbacks on the "orphan" callback
+        list.  RCU callbacks are placed on this list by CPUs going
+        offline, and are "adopted" either by the CPU helping the outgoing
+        CPU or by the next rcu_barrier*() call, whichever comes first.
+
 o       Each element of the form "1/1 0:127 ^0" represents one struct
         rcu_node.  Each line represents one level of the hierarchy, from
         root to leaves.  It is best to think of the rcu_data structures
@@ -379,7 +213,7 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
         might be either one, two, or three levels of rcu_node structures,
         depending on the relationship between CONFIG_RCU_FANOUT and
         CONFIG_NR_CPUS.
-        
+
         o       The numbers separated by the "/" are the qsmask followed
                 by the qsmaskinit.  The qsmask will have one bit
                 set for each entity in the next lower level that
@@ -389,10 +223,19 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
                 The value of qsmaskinit is assigned to that of qsmask
                 at the beginning of each grace period.
 
-                For example, for "rcu", the qsmask of the first entry
-                of the lowest level is 0x14, meaning that we are still
-                waiting for CPUs 2 and 4 to check in for the current
-                grace period.
+                For example, for "rcu_sched", the qsmask of the first
+                entry of the lowest level is 0x14, meaning that we
+                are still waiting for CPUs 2 and 4 to check in for the
+                current grace period.
+
+        o       The characters separated by the ">" indicate the state
+                of the blocked-tasks lists.  A "T" preceding the ">"
+                indicates that at least one task blocked in an RCU
+                read-side critical section blocks the current grace
+                period, while a "." preceding the ">" indicates otherwise.
+                The character following the ">" indicates similarly for
+                the next grace period.  A "T" should appear in this
+                field only for rcu-preempt.
 
         o       The numbers separated by the ":" are the range of CPUs
                 served by this struct rcu_node.  This can be helpful
@@ -431,8 +274,9 @@ rcu_bh:
   6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
   7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
+As always, this is once again split into "rcu_sched" and "rcu_bh"
+portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o       "np" is the number of times that __rcu_pending() has been invoked
         for the corresponding flavor of RCU.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index e41a7fecf0d3..d542ca243b80 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -830,7 +830,7 @@ sched:	Critical sections	Grace period		Barrier
 SRCU:   Critical sections       Grace period            Barrier
 
         srcu_read_lock          synchronize_srcu        N/A
-        srcu_read_unlock
+        srcu_read_unlock        synchronize_srcu_expedited
 
 SRCU:   Initialization/cleanup
         init_srcu_struct
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 78a9168ff377..1053a56be3b1 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -15,7 +15,7 @@ kernel patches.
 2: Passes allnoconfig, allmodconfig
 
 3: Builds on multiple CPU architectures by using local cross-compile tools
-   or something like PLM at OSDL.
+   or some other build farm.
 
 4: ppc64 is a good architecture for cross-compilation checking because it
    tends to use `unsigned long' for 64-bit quantities.
@@ -88,3 +88,6 @@ kernel patches.
 
 24: All memory barriers {e.g., barrier(), rmb(), wmb()} need a comment in the
     source code that explains the logic of what they are doing and why.
+
+25: If any ioctl's are added by the patch, then also update
+    Documentation/ioctl/ioctl-number.txt.
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
new file mode 100644
index 000000000000..0af0e9eed5d6
--- /dev/null
+++ b/Documentation/arm/OMAP/DSS
@@ -0,0 +1,317 @@
+OMAP2/3 Display Subsystem
+-------------------------
+
+This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
+(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
+TV-out and multiple display support, but there are lots of small improvements
+also.
+
+The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
+panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
+currently side by side, you can choose which one to use.
+
+Features
+--------
+
+Working and tested features include:
+
+- MIPI DPI (parallel) output
+- MIPI DSI output in command mode
+- MIPI DBI (RFBI) output
+- SDI output
+- TV output
+- All pieces can be compiled as a module or inside kernel
+- Use DISPC to update any of the outputs
+- Use CPU to update RFBI or DSI output
+- OMAP DISPC planes
+- RGB16, RGB24 packed, RGB24 unpacked
+- YUV2, UYVY
+- Scaling
+- Adjusting DSS FCK to find a good pixel clock
+- Use DSI DPLL to create DSS FCK
+
+Tested boards include:
+- OMAP3 SDP board
+- Beagle board
+- N810
+
+omapdss driver
+--------------
+
+The DSS driver does not itself have any support for Linux framebuffer, V4L or
+such like the current ones, but it has an internal kernel API that upper level
+drivers can use.
+
+The DSS driver models OMAP's overlays, overlay managers and displays in a
+flexible way to enable non-common multi-display configuration. In addition to
+modelling the hardware overlays, omapdss supports virtual overlays and overlay
+managers. These can be used when updating a display with CPU or system DMA.
+
+Panel and controller drivers
+----------------------------
+
+The drivers implement panel or controller specific functionality and are not
+usually visible to users except through omapfb driver.  They register
+themselves to the DSS driver.
+
+omapfb driver
+-------------
+
+The omapfb driver implements arbitrary number of standard linux framebuffers.
+These framebuffers can be routed flexibly to any overlays, thus allowing very
+dynamic display architecture.
+
+The driver exports some omapfb specific ioctls, which are compatible with the
+ioctls in the old driver.
+
+The rest of the non standard features are exported via sysfs. Whether the final
+implementation will use sysfs, or ioctls, is still open.
+
+V4L2 drivers
+------------
+
+V4L2 is being implemented in TI.
+
+From omapdss point of view the V4L2 drivers should be similar to framebuffer
+driver.
+
+Architecture
+--------------------
+
+Some clarification what the different components do:
+
+    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
+      pixel data for the image. Framebuffer has width and height and color
+      depth.
+    - Overlay defines where the pixels are read from and where they go on the
+      screen. The overlay may be smaller than framebuffer, thus displaying only
+      part of the framebuffer. The position of the overlay may be changed if
+      the overlay is smaller than the display.
+    - Overlay manager combines the overlays in to one image and feeds them to
+      display.
+    - Display is the actual physical display device.
+
+A framebuffer can be connected to multiple overlays to show the same pixel data
+on all of the overlays. Note that in this case the overlay input sizes must be
+the same, but, in case of video overlays, the output size can be different. Any
+framebuffer can be connected to any overlay.
+
+An overlay can be connected to one overlay manager. Also DISPC overlays can be
+connected only to DISPC overlay managers, and virtual overlays can be only
+connected to virtual overlays.
+
+An overlay manager can be connected to one display. There are certain
+restrictions which kinds of displays an overlay manager can be connected:
+
+    - DISPC TV overlay manager can be only connected to TV display.
+    - Virtual overlay managers can only be connected to DBI or DSI displays.
+    - DISPC LCD overlay manager can be connected to all displays, except TV
+      display.
+
+Sysfs
+-----
+The sysfs interface is mainly used for testing. I don't think sysfs
+interface is the best for this in the final version, but I don't quite know
+what would be the best interfaces for these things.
+
+The sysfs interface is divided to two parts: DSS and FB.
+
+/sys/class/graphics/fb? directory:
+mirror          0=off, 1=on
+rotate          Rotation 0-3 for 0, 90, 180, 270 degrees
+rotate_type     0 = DMA rotation, 1 = VRFB rotation
+overlays        List of overlay numbers to which framebuffer pixels go
+phys_addr       Physical address of the framebuffer
+virt_addr       Virtual address of the framebuffer
+size            Size of the framebuffer
+
+/sys/devices/platform/omapdss/overlay? directory:
+enabled         0=off, 1=on
+input_size      width,height (ie. the framebuffer size)
+manager         Destination overlay manager name
+name
+output_size     width,height
+position        x,y
+screen_width    width
+global_alpha    global alpha 0-255 0=transparent 255=opaque
+
+/sys/devices/platform/omapdss/manager? directory:
+display                         Destination display
+name
+alpha_blending_enabled          0=off, 1=on
+trans_key_enabled               0=off, 1=on
+trans_key_type                  gfx-destination, video-source
+trans_key_value                 transparency color key (RGB24)
+default_color                   default background color (RGB24)
+
+/sys/devices/platform/omapdss/display? directory:
+ctrl_name       Controller name
+mirror          0=off, 1=on
+update_mode     0=off, 1=auto, 2=manual
+enabled         0=off, 1=on
+name
+rotate          Rotation 0-3 for 0, 90, 180, 270 degrees
+timings         Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
+                When writing, two special timings are accepted for tv-out:
+                "pal" and "ntsc"
+panel_name
+tear_elim       Tearing elimination 0=off, 1=on
+
+There are also some debugfs files at <debugfs>/omapdss/ which show information
+about clocks and registers.
+
+Examples
+--------
+
+The following definitions have been made for the examples below:
+
+ovl0=/sys/devices/platform/omapdss/overlay0
+ovl1=/sys/devices/platform/omapdss/overlay1
+ovl2=/sys/devices/platform/omapdss/overlay2
+
+mgr0=/sys/devices/platform/omapdss/manager0
+mgr1=/sys/devices/platform/omapdss/manager1
+
+lcd=/sys/devices/platform/omapdss/display0
+dvi=/sys/devices/platform/omapdss/display1
+tv=/sys/devices/platform/omapdss/display2
+
+fb0=/sys/class/graphics/fb0
+fb1=/sys/class/graphics/fb1
+fb2=/sys/class/graphics/fb2
+
+Default setup on OMAP3 SDP
+--------------------------
+
+Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
+and TV-out are not in use. The columns from left to right are:
+framebuffers, overlays, overlay managers, displays. Framebuffers are
+handled by omapfb, and the rest by the DSS.
+
+FB0 --- GFX  -\            DVI
+FB1 --- VID1 --+- LCD ---- LCD
+FB2 --- VID2 -/   TV ----- TV
+
+Example: Switch from LCD to DVI
+----------------------
+
+w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+echo "0" > $lcd/enabled
+echo "" > $mgr0/display
+fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
+# at this point you have to switch the dvi/lcd dip-switch from the omap board
+echo "dvi" > $mgr0/display
+echo "1" > $dvi/enabled
+
+After this the configuration looks like:
+
+FB0 --- GFX  -\         -- DVI
+FB1 --- VID1 --+- LCD -/   LCD
+FB2 --- VID2 -/   TV ----- TV
+
+Example: Clone GFX overlay to LCD and TV
+-------------------------------
+
+w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1`
+h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1`
+
+echo "0" > $ovl0/enabled
+echo "0" > $ovl1/enabled
+
+echo "" > $fb1/overlays
+echo "0,1" > $fb0/overlays
+
+echo "$w,$h" > $ovl1/output_size
+echo "tv" > $ovl1/manager
+
+echo "1" > $ovl0/enabled
+echo "1" > $ovl1/enabled
+
+echo "1" > $tv/enabled
+
+After this the configuration looks like (only relevant parts shown):
+
+FB0 +-- GFX  ---- LCD ---- LCD
+     \- VID1 ---- TV  ---- TV
+
+Misc notes
+----------
+
+OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+
+Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
+of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
+
+Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
+does not support mirroring.
+
+VRFB rotation requires much more memory than non-rotated framebuffer, so you
+probably need to increase your vram setting before using VRFB rotation. Also,
+many applications may not work with VRFB if they do not pay attention to all
+framebuffer parameters.
+
+Kernel boot arguments
+---------------------
+
+vram=<size>
+        - Amount of total VRAM to preallocate. For example, "10M". omapfb
+          allocates memory for framebuffers from VRAM.
+
+omapfb.mode=<display>:<mode>[,...]
+        - Default video mode for specified displays. For example,
+          "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
+          There are also two special modes: "pal" and "ntsc" that
+          can be used to tv out.
+
+omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
+        - VRAM allocated for a framebuffer. Normally omapfb allocates vram
+          depending on the display size. With this you can manually allocate
+          more or define the physical address of each framebuffer. For example,
+          "1:4M" to allocate 4M for fb1.
+
+omapfb.debug=<y|n>
+        - Enable debug printing. You have to have OMAPFB debug support enabled
+          in kernel config.
+
+omapfb.test=<y|n>
+        - Draw test pattern to framebuffer whenever framebuffer settings change.
+          You need to have OMAPFB debug support enabled in kernel config.
+
+omapfb.vrfb=<y|n>
+        - Use VRFB rotation for all framebuffers.
+
+omapfb.rotate=<angle>
+        - Default rotation applied to all framebuffers.
+          0 - 0 degree rotation
+          1 - 90 degree rotation
+          2 - 180 degree rotation
+          3 - 270 degree rotation
+
+omapfb.mirror=<y|n>
+        - Default mirror for all framebuffers. Only works with DMA rotation.
+
+omapdss.def_disp=<display>
+        - Name of default display, to which all overlays will be connected.
+          Common examples are "lcd" or "tv".
+
+omapdss.debug=<y|n>
+        - Enable debug printing. You have to have DSS debug support enabled in
+          kernel config.
+
+TODO
+----
+
+DSS locking
+
+Error checking
+- Lots of checks are missing or implemented just as BUG()
+
+System DMA update for DSI
+- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
+  to skip the empty byte?)
+
+OMAP1 support
+- Not sure if needed
+
diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
index 26422f0f9080..b87292e05f2f 100644
--- a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
+++ b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
@@ -55,4 +55,4 @@ Maintainers
   This board is maintained by Simtec Electronics.
 
 
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 948c8718d967..2af2cf39915f 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -134,4 +134,4 @@ Authour
 
 
 Ben Dooks, 03 October 2004
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index cff6227b4484..081892df4fda 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -299,4 +299,4 @@ Port Contributors
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
+Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
index 295d971a15ed..f057876b920b 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
@@ -117,4 +117,4 @@ ATA
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
index ab2a88858f12..909bdc7dd7b5 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
@@ -18,4 +18,4 @@ Camera Interface
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index a30fe510572b..7edd0e2e6c5b 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -133,5 +133,5 @@ Configuration
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004 Simtec Electronics
+Ben Dooks, Copyright 2004 Simtec Electronics
 
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index 67671eba4231..f82b1faefad5 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -90,4 +90,4 @@ Platform Data
 Document Author
 ---------------
 
-Ben Dooks, (c) 2005 Simtec Electronics
+Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg b/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg
new file mode 100644
index 000000000000..f87cfa0dc2fb
--- /dev/null
+++ b/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg
@@ -0,0 +1,588 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.0"
+   width="210mm"
+   height="297mm"
+   viewBox="0 0 21000 29700"
+   id="svg2"
+   style="fill-rule:evenodd">
+  <defs
+     id="defs4" />
+  <g
+     id="Default"
+     style="visibility:visible">
+    <desc
+       id="desc180">Master slide</desc>
+  </g>
+  <path
+     d="M 11999,8601 L 11899,8301 L 12099,8301 L 11999,8601 z"
+     id="path193"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,7801 L 11999,8361"
+     id="path197"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 7999,10401 L 7899,10101 L 8099,10101 L 7999,10401 z"
+     id="path209"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,9601 L 7999,10161"
+     id="path213"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 11999,7801 L 11685,7840 L 11724,7644 L 11999,7801 z"
+     id="path225"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,7001 L 11764,7754"
+     id="path229"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-1244.4792,1416.5139)"
+     id="g245"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text247">
+      <tspan
+         x="9139 9368 9579 9808 9986 10075 10252 10481 10659 10837 10909"
+         y="9284"
+         id="tspan249">RSDataReply</tspan>
+    </text>
+  </g>
+  <path
+     d="M 7999,9601 L 8281,9458 L 8311,9655 L 7999,9601 z"
+     id="path259"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,9001 L 8236,9565"
+     id="path263"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,1620.9382,-1639.4947)"
+     id="g279"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text281">
+      <tspan
+         x="8743 8972 9132 9310 9573 9801 10013 10242 10419 10597 10775 10953 11114"
+         y="7023"
+         id="tspan283">CsumRSRequest</tspan>
+    </text>
+  </g>
+  <text
+     id="text297"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
+       y="5707"
+       id="tspan299">w_make_resync_request()</tspan>
+  </text>
+  <text
+     id="text313"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
+       y="7806"
+       id="tspan315">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text329"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
+       y="8606"
+       id="tspan331">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text345"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13825 13986 14164 14426 14604 14710 14871 15049 15154 15332 15510 15616"
+       y="9007"
+       id="tspan347">w_e_end_csum_rs_req()</tspan>
+  </text>
+  <text
+     id="text361"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4444 4550 4728 4889 5066 5138 5299 5477 5655 5883 6095 6324 6501 6590 6768 6997 7175 7352 7424 7585 7691"
+       y="9507"
+       id="tspan363">receive_RSDataReply()</tspan>
+  </text>
+  <text
+     id="text377"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4457 4635 4741 4918 5096 5274 5452 5630 5807 5879 6057 6235 6464 6569 6641 6730 6908 7086 7247 7425 7585 7691"
+       y="10407"
+       id="tspan379">drbd_endio_write_sec()</tspan>
+  </text>
+  <text
+     id="text393"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4647 4825 5003 5180 5358 5536 5714 5820 5997 6158 6319 6497 6658 6836 7013 7085 7263 7424 7585 7691"
+       y="10907"
+       id="tspan395">e_end_resync_block()</tspan>
+  </text>
+  <path
+     d="M 11999,11601 L 11685,11640 L 11724,11444 L 11999,11601 z"
+     id="path405"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 7999,10801 L 11764,11554"
+     id="path409"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,2434.7562,-1674.649)"
+     id="g425"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text427">
+      <tspan
+         x="9320 9621 9726 9798 9887 10065 10277 10438"
+         y="10943"
+         id="tspan429">WriteAck</tspan>
+    </text>
+  </g>
+  <text
+     id="text443"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12555 12644 12821 13033 13105 13283 13444 13604 13816 13977 14138 14244"
+       y="11559"
+       id="tspan445">got_BlockAck()</tspan>
+  </text>
+  <text
+     id="text459"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7999 8304 8541 8778 8990 9201 9413 9650 10001 10120 10357 10594 10806 11043 11280 11398 11703 11940 12152 12364 12601 12812 12931 13049 13261 13498 13710 13947 14065 14302 14540 14658 14777 14870 15107 15225 15437 15649 15886"
+       y="4877"
+       id="tspan461">Checksum based Resync, case not in sync</tspan>
+  </text>
+  <text
+     id="text475"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="6961 7266 7571 7854 8159 8299 8536 8654 8891 9010 9247 9484 9603 9840 9958 10077 10170 10407"
+       y="2806"
+       id="tspan477">DRBD-8.3 data flow</tspan>
+  </text>
+  <text
+     id="text491"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5190 5419 5596 5774 5952 6113 6291 6468 6646 6824 6985 7146 7324 7586 7692"
+       y="7005"
+       id="tspan493">w_e_send_csum()</tspan>
+  </text>
+  <path
+     d="M 11999,17601 L 11899,17301 L 12099,17301 L 11999,17601 z"
+     id="path503"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,16801 L 11999,17361"
+     id="path507"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 11999,16801 L 11685,16840 L 11724,16644 L 11999,16801 z"
+     id="path519"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,16001 L 11764,16754"
+     id="path523"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-2539.5806,1529.3491)"
+     id="g539"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text541">
+      <tspan
+         x="9269 9498 9709 9798 9959 10048 10226 10437 10598 10776"
+         y="18265"
+         id="tspan543">RSIsInSync</tspan>
+    </text>
+  </g>
+  <path
+     d="M 7999,18601 L 8281,18458 L 8311,18655 L 7999,18601 z"
+     id="path553"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 11999,18001 L 8236,18565"
+     id="path557"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,3461.4027,-1449.3012)"
+     id="g573"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text575">
+      <tspan
+         x="8743 8972 9132 9310 9573 9801 10013 10242 10419 10597 10775 10953 11114"
+         y="16023"
+         id="tspan577">CsumRSRequest</tspan>
+    </text>
+  </g>
+  <text
+     id="text591"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
+       y="16806"
+       id="tspan593">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text607"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
+       y="17606"
+       id="tspan609">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text623"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13825 13986 14164 14426 14604 14710 14871 15049 15154 15332 15510 15616"
+       y="18007"
+       id="tspan625">w_e_end_csum_rs_req()</tspan>
+  </text>
+  <text
+     id="text639"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5735 5913 6091 6180 6357 6446 6607 6696 6874 7085 7246 7424 7585 7691"
+       y="18507"
+       id="tspan641">got_IsInSync()</tspan>
+  </text>
+  <text
+     id="text655"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7999 8304 8541 8778 8990 9201 9413 9650 10001 10120 10357 10594 10806 11043 11280 11398 11703 11940 12152 12364 12601 12812 12931 13049 13261 13498 13710 13947 14065 14159 14396 14514 14726 14937 15175"
+       y="13877"
+       id="tspan657">Checksum based Resync, case in sync</tspan>
+  </text>
+  <path
+     d="M 12000,24601 L 11900,24301 L 12100,24301 L 12000,24601 z"
+     id="path667"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,23801 L 12000,24361"
+     id="path671"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 8000,26401 L 7900,26101 L 8100,26101 L 8000,26401 z"
+     id="path683"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,25601 L 8000,26161"
+     id="path687"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 12000,23801 L 11686,23840 L 11725,23644 L 12000,23801 z"
+     id="path699"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,23001 L 11765,23754"
+     id="path703"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-3543.8452,1630.5143)"
+     id="g719"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text721">
+      <tspan
+         x="9464 9710 9921 10150 10328 10505 10577"
+         y="25236"
+         id="tspan723">OVReply</tspan>
+    </text>
+  </g>
+  <path
+     d="M 8000,25601 L 8282,25458 L 8312,25655 L 8000,25601 z"
+     id="path733"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,25001 L 8237,25565"
+     id="path737"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,4918.2801,-1381.2128)"
+     id="g753"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text755">
+      <tspan
+         x="9142 9388 9599 9828 10006 10183 10361 10539 10700"
+         y="23106"
+         id="tspan757">OVRequest</tspan>
+    </text>
+  </g>
+  <text
+     id="text771"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13656 13868 14097 14274 14452 14630 14808 14969 15058 15163"
+       y="23806"
+       id="tspan773">receive_OVRequest()</tspan>
+  </text>
+  <text
+     id="text787"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14084 14262 14439 14617 14795 14956 15134 15295 15400"
+       y="24606"
+       id="tspan789">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text803"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12192 12421 12598 12776 12954 13132 13310 13487 13665 13843 14004 14182 14288 14465 14643 14749"
+       y="25007"
+       id="tspan805">w_e_end_ov_req()</tspan>
+  </text>
+  <text
+     id="text819"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5101 5207 5385 5546 5723 5795 5956 6134 6312 6557 6769 6998 7175 7353 7425 7586 7692"
+       y="25507"
+       id="tspan821">receive_OVReply()</tspan>
+  </text>
+  <text
+     id="text835"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
+       y="26407"
+       id="tspan837">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text851"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4902 5131 5308 5486 5664 5842 6020 6197 6375 6553 6714 6892 6998 7175 7353 7425 7586 7692"
+       y="26907"
+       id="tspan853">w_e_end_ov_reply()</tspan>
+  </text>
+  <path
+     d="M 12000,27601 L 11686,27640 L 11725,27444 L 12000,27601 z"
+     id="path863"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 8000,26801 L 11765,27554"
+     id="path867"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,5704.1907,-1328.312)"
+     id="g883"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text885">
+      <tspan
+         x="9279 9525 9736 9965 10143 10303 10481 10553"
+         y="26935"
+         id="tspan887">OVResult</tspan>
+    </text>
+  </g>
+  <text
+     id="text901"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12556 12645 12822 13068 13280 13508 13686 13847 14025 14097 14185 14291"
+       y="27559"
+       id="tspan903">got_OVResult()</tspan>
+  </text>
+  <text
+     id="text917"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8000 8330 8567 8660 8754 8991 9228 9346 9558 9795 9935 10028 10146"
+       y="21877"
+       id="tspan919">Online verify</tspan>
+  </text>
+  <text
+     id="text933"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4641 4870 5047 5310 5488 5649 5826 6004 6182 6343 6521 6626 6804 6982 7160 7338 7499 7587 7693"
+       y="23005"
+       id="tspan935">w_make_ov_request()</tspan>
+  </text>
+  <path
+     d="M 8000,6500 L 7900,6200 L 8100,6200 L 8000,6500 z"
+     id="path945"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,5700 L 8000,6260"
+     id="path949"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 3900,5500 L 3700,5500 L 3700,11000 L 3900,11000"
+     id="path961"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 3900,14500 L 3700,14500 L 3700,18600 L 3900,18600"
+     id="path973"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 3900,22800 L 3700,22800 L 3700,26900 L 3900,26900"
+     id="path985"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <text
+     id="text1001"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
+       y="6506"
+       id="tspan1003">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text1017"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
+       y="14708"
+       id="tspan1019">w_make_resync_request()</tspan>
+  </text>
+  <text
+     id="text1033"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5190 5419 5596 5774 5952 6113 6291 6468 6646 6824 6985 7146 7324 7586 7692"
+       y="16006"
+       id="tspan1035">w_e_send_csum()</tspan>
+  </text>
+  <path
+     d="M 8000,15501 L 7900,15201 L 8100,15201 L 8000,15501 z"
+     id="path1045"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,14701 L 8000,15261"
+     id="path1049"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     id="text1065"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
+       y="15507"
+       id="tspan1067">drbd_endio_read_sec()</tspan>
+  </text>
+  <path
+     d="M 16100,9000 L 16300,9000 L 16300,7500 L 16100,7500"
+     id="path1077"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 16100,18000 L 16300,18000 L 16300,16500 L 16100,16500"
+     id="path1089"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 16100,25000 L 16300,25000 L 16300,23500 L 16100,23500"
+     id="path1101"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <text
+     id="text1117"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2026 2132 2293 2471 2648 2826 3004 3076 3254 3431 3503 3681 3787"
+       y="5402"
+       id="tspan1119">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1133"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2027 2133 2294 2472 2649 2827 3005 3077 3255 3432 3504 3682 3788"
+       y="14402"
+       id="tspan1135">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1149"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2026 2132 2293 2471 2648 2826 3004 3076 3254 3431 3503 3681 3787"
+       y="22602"
+       id="tspan1151">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1165"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1426 1532 1693 1871 2031 2209 2472 2649 2721 2899 2988 3166 3344 3416 3593 3699"
+       y="11302"
+       id="tspan1167">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1181"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1526 1632 1793 1971 2131 2309 2572 2749 2821 2999 3088 3266 3444 3516 3693 3799"
+       y="18931"
+       id="tspan1183">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1197"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1526 1632 1793 1971 2131 2309 2572 2749 2821 2999 3088 3266 3444 3516 3693 3799"
+       y="27231"
+       id="tspan1199">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1213"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16126 16232 16393 16571 16748 16926 17104 17176 17354 17531 17603 17781 17887"
+       y="7402"
+       id="tspan1215">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1229"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16127 16233 16394 16572 16749 16927 17105 17177 17355 17532 17604 17782 17888"
+       y="16331"
+       id="tspan1231">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1245"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16127 16233 16394 16572 16749 16927 17105 17177 17355 17532 17604 17782 17888"
+       y="23302"
+       id="tspan1247">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1261"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
+       y="9302"
+       id="tspan1263">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1277"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
+       y="18331"
+       id="tspan1279">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1293"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16126 16232 16393 16571 16731 16909 17172 17349 17421 17599 17688 17866 18044 18116 18293 18399"
+       y="25302"
+       id="tspan1295">rs_complete_io()</tspan>
+  </text>
+</svg>
diff --git a/Documentation/blockdev/drbd/DRBD-data-packets.svg b/Documentation/blockdev/drbd/DRBD-data-packets.svg
new file mode 100644
index 000000000000..48a1e2165fec
--- /dev/null
+++ b/Documentation/blockdev/drbd/DRBD-data-packets.svg
@@ -0,0 +1,459 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.0"
+   width="210mm"
+   height="297mm"
+   viewBox="0 0 21000 29700"
+   id="svg2"
+   style="fill-rule:evenodd">
+  <defs
+     id="defs4" />
+  <g
+     id="Default"
+     style="visibility:visible">
+    <desc
+       id="desc176">Master slide</desc>
+  </g>
+  <path
+     d="M 11999,19601 L 11899,19301 L 12099,19301 L 11999,19601 z"
+     id="path189"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,18801 L 11999,19361"
+     id="path193"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 7999,21401 L 7899,21101 L 8099,21101 L 7999,21401 z"
+     id="path205"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,20601 L 7999,21161"
+     id="path209"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 11999,18801 L 11685,18840 L 11724,18644 L 11999,18801 z"
+     id="path221"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,18001 L 11764,18754"
+     id="path225"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="-3023.845"
+     y="1106.8124"
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
+     id="text243"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="6115.1553 6344.1553 6555.1553 6784.1553 6962.1553 7051.1553 7228.1553 7457.1553 7635.1553 7813.1553 7885.1553"
+       y="21390.812"
+       id="tspan245">RSDataReply</tspan>
+  </text>
+  <path
+     d="M 7999,20601 L 8281,20458 L 8311,20655 L 7999,20601 z"
+     id="path255"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,20001 L 8236,20565"
+     id="path259"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="3502.5356"
+     y="-2184.6621"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text277"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12321.536 12550.536 12761.536 12990.536 13168.536 13257.536 13434.536 13663.536 13841.536 14019.536 14196.536 14374.536 14535.536"
+       y="15854.338"
+       id="tspan279">RSDataRequest</tspan>
+  </text>
+  <text
+     id="text293"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
+       y="17807"
+       id="tspan295">w_make_resync_request()</tspan>
+  </text>
+  <text
+     id="text309"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
+       y="18806"
+       id="tspan311">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text325"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
+       y="19606"
+       id="tspan327">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text341"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13770 13931 14109 14287 14375 14553 14731 14837 15015 15192 15298"
+       y="20007"
+       id="tspan343">w_e_end_rsdata_req()</tspan>
+  </text>
+  <text
+     id="text357"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4444 4550 4728 4889 5066 5138 5299 5477 5655 5883 6095 6324 6501 6590 6768 6997 7175 7352 7424 7585 7691"
+       y="20507"
+       id="tspan359">receive_RSDataReply()</tspan>
+  </text>
+  <text
+     id="text373"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4457 4635 4741 4918 5096 5274 5452 5630 5807 5879 6057 6235 6464 6569 6641 6730 6908 7086 7247 7425 7585 7691"
+       y="21407"
+       id="tspan375">drbd_endio_write_sec()</tspan>
+  </text>
+  <text
+     id="text389"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4647 4825 5003 5180 5358 5536 5714 5820 5997 6158 6319 6497 6658 6836 7013 7085 7263 7424 7585 7691"
+       y="21907"
+       id="tspan391">e_end_resync_block()</tspan>
+  </text>
+  <path
+     d="M 11999,22601 L 11685,22640 L 11724,22444 L 11999,22601 z"
+     id="path401"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 7999,21801 L 11764,22554"
+     id="path405"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <text
+     x="4290.3008"
+     y="-2369.6162"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text423"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="13610.301 13911.301 14016.301 14088.301 14177.301 14355.301 14567.301 14728.301"
+       y="19573.385"
+       id="tspan425">WriteAck</tspan>
+  </text>
+  <text
+     id="text439"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12555 12644 12821 13033 13105 13283 13444 13604 13816 13977 14138 14244"
+       y="22559"
+       id="tspan441">got_BlockAck()</tspan>
+  </text>
+  <text
+     id="text455"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7999 8304 8541 8753 8964 9201 9413 9531 9769 9862 10099 10310 10522 10734 10852 10971 11208 11348 11585 11822"
+       y="16877"
+       id="tspan457">Resync blocks, 4-32K</tspan>
+  </text>
+  <path
+     d="M 12000,7601 L 11900,7301 L 12100,7301 L 12000,7601 z"
+     id="path467"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,6801 L 12000,7361"
+     id="path471"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 12000,6801 L 11686,6840 L 11725,6644 L 12000,6801 z"
+     id="path483"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,6001 L 11765,6754"
+     id="path487"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="-1288.1796"
+     y="1279.7666"
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
+     id="text505"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8174.8208 8475.8203 8580.8203 8652.8203 8741.8203 8919.8203 9131.8203 9292.8203"
+       y="9516.7666"
+       id="tspan507">WriteAck</tspan>
+  </text>
+  <path
+     d="M 8000,8601 L 8282,8458 L 8312,8655 L 8000,8601 z"
+     id="path517"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 12000,8001 L 8237,8565"
+     id="path521"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <text
+     x="1065.6655"
+     y="-2097.7664"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text539"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="10682.666 10911.666 11088.666 11177.666"
+       y="4107.2339"
+       id="tspan541">Data</tspan>
+  </text>
+  <text
+     id="text555"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4746 4924 5030 5207 5385 5563 5826 6003 6164 6342 6520 6626 6803 6981 7159 7337 7498 7587 7692"
+       y="5505"
+       id="tspan557">drbd_make_request()</tspan>
+  </text>
+  <text
+     id="text571"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13639 13817 13906 14084 14190"
+       y="6806"
+       id="tspan573">receive_Data()</tspan>
+  </text>
+  <text
+     id="text587"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14207 14312 14384 14473 14651 14829 14990 15168 15328 15434"
+       y="7606"
+       id="tspan589">drbd_endio_write_sec()</tspan>
+  </text>
+  <text
+     id="text603"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12192 12370 12548 12725 12903 13081 13259 13437 13509 13686 13847 14008 14114"
+       y="8007"
+       id="tspan605">e_end_block()</tspan>
+  </text>
+  <text
+     id="text619"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5647 5825 6003 6092 6269 6481 6553 6731 6892 7052 7264 7425 7586 7692"
+       y="8606"
+       id="tspan621">got_BlockAck()</tspan>
+  </text>
+  <text
+     id="text635"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8000 8305 8542 8779 9016 9109 9346 9486 9604 9956 10049 10189 10328 10565 10705 10942 11179 11298 11603 11742 11835 11954 12191 12310 12428 12665 12902 13139 13279 13516 13753"
+       y="4877"
+       id="tspan637">Regular mirrored write, 512-32K</tspan>
+  </text>
+  <text
+     id="text651"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5381 5610 5787 5948 6126 6304 6482 6659 6837 7015 7087 7265 7426 7587 7692"
+       y="6003"
+       id="tspan653">w_send_dblock()</tspan>
+  </text>
+  <path
+     d="M 8000,6800 L 7900,6500 L 8100,6500 L 8000,6800 z"
+     id="path663"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,6000 L 8000,6560"
+     id="path667"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     id="text683"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4602 4780 4886 5063 5241 5419 5597 5775 5952 6024 6202 6380 6609 6714 6786 6875 7053 7231 7409 7515 7587 7692"
+       y="6905"
+       id="tspan685">drbd_endio_write_pri()</tspan>
+  </text>
+  <path
+     d="M 12000,13602 L 11900,13302 L 12100,13302 L 12000,13602 z"
+     id="path695"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,12802 L 12000,13362"
+     id="path699"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 12000,12802 L 11686,12841 L 11725,12645 L 12000,12802 z"
+     id="path711"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,12002 L 11765,12755"
+     id="path715"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="-2155.5266"
+     y="1201.5964"
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
+     id="text733"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7202.4736 7431.4736 7608.4736 7697.4736 7875.4736 8104.4736 8282.4736 8459.4736 8531.4736"
+       y="15454.597"
+       id="tspan735">DataReply</tspan>
+  </text>
+  <path
+     d="M 8000,14602 L 8282,14459 L 8312,14656 L 8000,14602 z"
+     id="path745"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,14002 L 8237,14566"
+     id="path749"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="2280.3804"
+     y="-2103.2141"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text767"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="11316.381 11545.381 11722.381 11811.381 11989.381 12218.381 12396.381 12573.381 12751.381 12929.381 13090.381"
+       y="9981.7861"
+       id="tspan769">DataRequest</tspan>
+  </text>
+  <text
+     id="text783"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4746 4924 5030 5207 5385 5563 5826 6003 6164 6342 6520 6626 6803 6981 7159 7337 7498 7587 7692"
+       y="11506"
+       id="tspan785">drbd_make_request()</tspan>
+  </text>
+  <text
+     id="text799"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13639 13817 13906 14084 14312 14490 14668 14846 15024 15185 15273 15379"
+       y="12807"
+       id="tspan801">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text815"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14084 14262 14439 14617 14795 14956 15134 15295 15400"
+       y="13607"
+       id="tspan817">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text831"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12192 12421 12598 12776 12954 13132 13310 13487 13665 13843 14021 14110 14288 14465 14571 14749 14927 15033"
+       y="14008"
+       id="tspan833">w_e_end_data_req()</tspan>
+  </text>
+  <g
+     id="g835"
+     style="visibility:visible">
+    <desc
+       id="desc837">Drawing</desc>
+    <text
+       id="text847"
+       style="font-size:318px;font-weight:400;fill:#008000;font-family:Helvetica embedded">
+      <tspan
+         x="4885 4991 5169 5330 5507 5579 5740 5918 6096 6324 6502 6591 6769 6997 7175 7353 7425 7586 7692"
+         y="14607"
+         id="tspan849">receive_DataReply()</tspan>
+    </text>
+  </g>
+  <text
+     id="text863"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8000 8305 8398 8610 8821 8914 9151 9363 9575 9693 9833 10070 10307 10544 10663 10781 11018 11255 11493 11632 11869 12106"
+       y="10878"
+       id="tspan865">Diskless read, 512-32K</tspan>
+  </text>
+  <text
+     id="text879"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5029 5258 5435 5596 5774 5952 6130 6307 6413 6591 6769 6947 7125 7230 7408 7586 7692"
+       y="12004"
+       id="tspan881">w_send_read_req()</tspan>
+  </text>
+  <text
+     id="text895"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="6961 7266 7571 7854 8159 8278 8515 8633 8870 9107 9226 9463 9581 9700 9793 10030"
+       y="2806"
+       id="tspan897">DRBD 8 data flow</tspan>
+  </text>
+  <path
+     d="M 3900,5300 L 3700,5300 L 3700,7000 L 3900,7000"
+     id="path907"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 3900,17600 L 3700,17600 L 3700,22000 L 3900,22000"
+     id="path919"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 16100,20000 L 16300,20000 L 16300,18500 L 16100,18500"
+     id="path931"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <text
+     id="text947"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2126 2304 2376 2554 2731 2909 3087 3159 3337 3515 3587 3764 3870"
+       y="5202"
+       id="tspan949">al_begin_io()</tspan>
+  </text>
+  <text
+     id="text963"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1632 1810 1882 2060 2220 2398 2661 2839 2910 3088 3177 3355 3533 3605 3783 3888"
+       y="7331"
+       id="tspan965">al_complete_io()</tspan>
+  </text>
+  <text
+     id="text979"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2126 2232 2393 2571 2748 2926 3104 3176 3354 3531 3603 3781 3887"
+       y="17431"
+       id="tspan981">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text995"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1626 1732 1893 2071 2231 2409 2672 2849 2921 3099 3188 3366 3544 3616 3793 3899"
+       y="22331"
+       id="tspan997">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1011"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16027 16133 16294 16472 16649 16827 17005 17077 17255 17432 17504 17682 17788"
+       y="18402"
+       id="tspan1013">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1027"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
+       y="20331"
+       id="tspan1029">rs_complete_io()</tspan>
+  </text>
+</svg>
diff --git a/Documentation/blockdev/drbd/README.txt b/Documentation/blockdev/drbd/README.txt
new file mode 100644
index 000000000000..627b0a1bf35e
--- /dev/null
+++ b/Documentation/blockdev/drbd/README.txt
@@ -0,0 +1,16 @@
+Description
+
+  DRBD is a shared-nothing, synchronously replicated block device. It
+  is designed to serve as a building block for high availability
+  clusters and in this context, is a "drop-in" replacement for shared
+  storage. Simplistically, you could see it as a network RAID 1.
+
+  Please visit http://www.drbd.org to find out more.
+
+The here included files are intended to help understand the implementation
+
+DRBD-8.3-data-packets.svg, DRBD-data-packets.svg  
+  relates some functions, and write packets.
+
+conn-states-8.dot, disk-states-8.dot, node-states-8.dot
+  The sub graphs of DRBD's state transitions
diff --git a/Documentation/blockdev/drbd/conn-states-8.dot b/Documentation/blockdev/drbd/conn-states-8.dot
new file mode 100644
index 000000000000..025e8cf5e64a
--- /dev/null
+++ b/Documentation/blockdev/drbd/conn-states-8.dot
@@ -0,0 +1,18 @@
+digraph conn_states {
+        StandAllone  -> WFConnection   [ label = "ioctl_set_net()" ]
+        WFConnection -> Unconnected    [ label = "unable to bind()" ]
+        WFConnection -> WFReportParams [ label = "in connect() after accept" ]
+        WFReportParams -> StandAllone  [ label = "checks in receive_param()" ]
+        WFReportParams -> Connected    [ label = "in receive_param()" ]
+        WFReportParams -> WFBitMapS    [ label = "sync_handshake()" ]
+        WFReportParams -> WFBitMapT    [ label = "sync_handshake()" ]
+        WFBitMapS -> SyncSource        [ label = "receive_bitmap()" ]
+        WFBitMapT -> SyncTarget        [ label = "receive_bitmap()" ]
+        SyncSource -> Connected
+        SyncTarget -> Connected
+        SyncSource -> PausedSyncS
+        SyncTarget -> PausedSyncT
+        PausedSyncS -> SyncSource
+        PausedSyncT -> SyncTarget
+        Connected   -> WFConnection    [ label = "* on network error" ]
+}
diff --git a/Documentation/blockdev/drbd/disk-states-8.dot b/Documentation/blockdev/drbd/disk-states-8.dot
new file mode 100644
index 000000000000..d06cfb46fb98
--- /dev/null
+++ b/Documentation/blockdev/drbd/disk-states-8.dot
@@ -0,0 +1,16 @@
+digraph disk_states {
+        Diskless -> Inconsistent       [ label = "ioctl_set_disk()" ]
+        Diskless -> Consistent         [ label = "ioctl_set_disk()" ]
+        Diskless -> Outdated           [ label = "ioctl_set_disk()" ]
+        Consistent -> Outdated         [ label = "receive_param()" ]
+        Consistent -> UpToDate         [ label = "receive_param()" ]
+        Consistent -> Inconsistent     [ label = "start resync" ]
+        Outdated   -> Inconsistent     [ label = "start resync" ]
+        UpToDate   -> Inconsistent     [ label = "ioctl_replicate" ]
+        Inconsistent -> UpToDate       [ label = "resync completed" ]
+        Consistent -> Failed           [ label = "io completion error" ]
+        Outdated   -> Failed           [ label = "io completion error" ]
+        UpToDate   -> Failed           [ label = "io completion error" ]
+        Inconsistent -> Failed         [ label = "io completion error" ]
+        Failed -> Diskless             [ label = "sending notify to peer" ]
+}
diff --git a/Documentation/blockdev/drbd/drbd-connection-state-overview.dot b/Documentation/blockdev/drbd/drbd-connection-state-overview.dot
new file mode 100644
index 000000000000..6d9cf0a7b11d
--- /dev/null
+++ b/Documentation/blockdev/drbd/drbd-connection-state-overview.dot
@@ -0,0 +1,85 @@
+// vim: set sw=2 sts=2 :
+digraph {
+  rankdir=BT
+  bgcolor=white
+
+  node [shape=plaintext]
+  node [fontcolor=black]
+
+  StandAlone     [ style=filled,fillcolor=gray,label=StandAlone ]
+
+  node [fontcolor=lightgray]
+
+  Unconnected    [ label=Unconnected ]
+
+  CommTrouble [ shape=record,
+    label="{communication loss|{Timeout|BrokenPipe|NetworkFailure}}" ]
+
+  node [fontcolor=gray]
+
+  subgraph cluster_try_connect {
+    label="try to connect, handshake"
+    rank=max
+    WFConnection   [ label=WFConnection ]
+    WFReportParams [ label=WFReportParams ]
+  }
+
+  TearDown       [ label=TearDown ]
+
+  Connected      [ label=Connected,style=filled,fillcolor=green,fontcolor=black ]
+
+  node [fontcolor=lightblue]
+
+  StartingSyncS  [ label=StartingSyncS ]
+  StartingSyncT  [ label=StartingSyncT ]
+
+  subgraph cluster_bitmap_exchange {
+    node [fontcolor=red]
+    fontcolor=red
+    label="new application (WRITE?) requests blocked\lwhile bitmap is exchanged"
+
+    WFBitMapT      [ label=WFBitMapT ]
+    WFSyncUUID     [ label=WFSyncUUID ]
+    WFBitMapS      [ label=WFBitMapS ]
+  }
+
+  node [fontcolor=blue]
+
+  cluster_resync [ shape=record,label="{<any>resynchronisation process running\l'concurrent' application requests allowed|{{<T>PausedSyncT\nSyncTarget}|{<S>PausedSyncS\nSyncSource}}}" ]
+
+  node [shape=box,fontcolor=black]
+
+  // drbdadm [label="drbdadm connect"]
+  // handshake [label="drbd_connect()\ndrbd_do_handshake\ndrbd_sync_handshake() etc."]
+  // comm_error [label="communication trouble"]
+
+  //
+  // edges
+  // --------------------------------------
+
+  StandAlone -> Unconnected [ label="drbdadm connect" ]
+  Unconnected -> StandAlone  [ label="drbdadm disconnect\lor serious communication trouble" ]
+  Unconnected -> WFConnection [ label="receiver thread is started" ]
+  WFConnection -> WFReportParams [ headlabel="accept()\land/or                        \lconnect()\l" ]
+
+  WFReportParams -> StandAlone [ label="during handshake\lpeers do not agree\labout something essential" ]
+  WFReportParams -> Connected [ label="data identical\lno sync needed",color=green,fontcolor=green ]
+
+    WFReportParams -> WFBitMapS
+    WFReportParams -> WFBitMapT
+    WFBitMapT -> WFSyncUUID [minlen=0.1,constraint=false]
+
+      WFBitMapS -> cluster_resync:S
+      WFSyncUUID -> cluster_resync:T
+
+  edge [color=green]
+  cluster_resync:any -> Connected [ label="resnyc done",fontcolor=green ]
+
+  edge [color=red]
+  WFReportParams -> CommTrouble
+  Connected -> CommTrouble
+  cluster_resync:any -> CommTrouble
+  edge [color=black]
+  CommTrouble -> Unconnected [label="receiver thread is stopped" ]
+
+}
diff --git a/Documentation/blockdev/drbd/node-states-8.dot b/Documentation/blockdev/drbd/node-states-8.dot
new file mode 100644
index 000000000000..4a2b00c23547
--- /dev/null
+++ b/Documentation/blockdev/drbd/node-states-8.dot
@@ -0,0 +1,14 @@
+digraph node_states {
+        Secondary -> Primary           [ label = "ioctl_set_state()" ]
+        Primary   -> Secondary         [ label = "ioctl_set_state()" ]
+}
+
+digraph peer_states {
+        Secondary -> Primary           [ label = "recv state packet" ]
+        Primary   -> Secondary         [ label = "recv state packet" ]
+        Primary   -> Unknown           [ label = "connection lost" ]
+        Secondary  -> Unknown          [ label = "connection lost" ]
+        Unknown   -> Primary           [ label = "connected" ]
+        Unknown   -> Secondary         [ label = "connected" ]
+}
+
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
new file mode 100644
index 000000000000..630879cd9a42
--- /dev/null
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -0,0 +1,135 @@
+                                Block IO Controller
+                                ===================
+Overview
+========
+cgroup subsys "blkio" implements the block io controller. There seems to be
+a need of various kinds of IO control policies (like proportional BW, max BW)
+both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
+Plan is to use the same cgroup based management interface for blkio controller
+and based on user options switch IO policies in the background.
+
+In the first phase, this patchset implements proportional weight time based
+division of disk policy. It is implemented in CFQ. Hence this policy takes
+effect only on leaf nodes when CFQ is being used.
+
+HOWTO
+=====
+You can do a very simple testing of running two dd threads in two different
+cgroups. Here is what you can do.
+
+- Enable group scheduling in CFQ
+        CONFIG_CFQ_GROUP_IOSCHED=y
+
+- Compile and boot into kernel and mount IO controller (blkio).
+
+        mount -t cgroup -o blkio none /cgroup
+
+- Create two cgroups
+        mkdir -p /cgroup/test1/ /cgroup/test2
+
+- Set weights of group test1 and test2
+        echo 1000 > /cgroup/test1/blkio.weight
+        echo 500 > /cgroup/test2/blkio.weight
+
+- Create two same size files (say 512MB each) on same disk (file1, file2) and
+  launch two dd threads in different cgroup to read those files.
+
+        sync
+        echo 3 > /proc/sys/vm/drop_caches
+
+        dd if=/mnt/sdb/zerofile1 of=/dev/null &
+        echo $! > /cgroup/test1/tasks
+        cat /cgroup/test1/tasks
+
+        dd if=/mnt/sdb/zerofile2 of=/dev/null &
+        echo $! > /cgroup/test2/tasks
+        cat /cgroup/test2/tasks
+
+- At macro level, first dd should finish first. To get more precise data, keep
+  on looking at (with the help of script), at blkio.disk_time and
+  blkio.disk_sectors files of both test1 and test2 groups. This will tell how
+  much disk time (in milli seconds), each group got and how many secotors each
+  group dispatched to the disk. We provide fairness in terms of disk time, so
+  ideally io.disk_time of cgroups should be in proportion to the weight.
+
+Various user visible config options
+===================================
+CONFIG_CFQ_GROUP_IOSCHED
+        - Enables group scheduling in CFQ. Currently only 1 level of group
+          creation is allowed.
+
+CONFIG_DEBUG_CFQ_IOSCHED
+        - Enables some debugging messages in blktrace. Also creates extra
+          cgroup file blkio.dequeue.
+
+Config options selected automatically
+=====================================
+These config options are not user visible and are selected/deselected
+automatically based on IO scheduler configuration.
+
+CONFIG_BLK_CGROUP
+        - Block IO controller. Selected by CONFIG_CFQ_GROUP_IOSCHED.
+
+CONFIG_DEBUG_BLK_CGROUP
+        - Debug help. Selected by CONFIG_DEBUG_CFQ_IOSCHED.
+
+Details of cgroup files
+=======================
+- blkio.weight
+        - Specifies per cgroup weight.
+
+          Currently allowed range of weights is from 100 to 1000.
+
+- blkio.time
+        - disk time allocated to cgroup per device in milliseconds. First
+          two fields specify the major and minor number of the device and
+          third field specifies the disk time allocated to group in
+          milliseconds.
+
+- blkio.sectors
+        - number of sectors transferred to/from disk by the group. First
+          two fields specify the major and minor number of the device and
+          third field specifies the number of sectors transferred by the
+          group to/from the device.
+
+- blkio.dequeue
+        - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y. This
+          gives the statistics about how many a times a group was dequeued
+          from service tree of the device. First two fields specify the major
+          and minor number of the device and third field specifies the number
+          of times a group was dequeued from a particular device.
+
+CFQ sysfs tunable
+=================
+/sys/block/<disk>/queue/iosched/group_isolation
+
+If group_isolation=1, it provides stronger isolation between groups at the
+expense of throughput. By default group_isolation is 0. In general that
+means that if group_isolation=0, expect fairness for sequential workload
+only. Set group_isolation=1 to see fairness for random IO workload also.
+
+Generally CFQ will put random seeky workload in sync-noidle category. CFQ
+will disable idling on these queues and it does a collective idling on group
+of such queues. Generally these are slow moving queues and if there is a
+sync-noidle service tree in each group, that group gets exclusive access to
+disk for certain period. That means it will bring the throughput down if
+group does not have enough IO to drive deeper queue depths and utilize disk
+capacity to the fullest in the slice allocated to it. But the flip side is
+that even a random reader should get better latencies and overall throughput
+if there are lots of sequential readers/sync-idle workload running in the
+system.
+
+If group_isolation=0, then CFQ automatically moves all the random seeky queues
+in the root group. That means there will be no service differentiation for
+that kind of workload. This leads to better throughput as we do collective
+idling on root sync-noidle tree.
+
+By default one should run with group_isolation=0. If that is not sufficient
+and one wants stronger isolation between groups, then set group_isolation=1
+but this will come at cost of reduced throughput.
+
+What works
+==========
+- Currently only sync IO queues are support. All the buffered writes are
+  still system wide and not per group. Hence we will not see service
+  differentiation between buffered writes between groups.
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 75a58d14d3cf..6c30e930c122 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -92,9 +92,9 @@ policy->cpuinfo.max_freq -	the minimum and maximum frequency
                                 (in kHz) which is supported by 
                                 this CPU
 policy->cpuinfo.transition_latency   the time it takes on this CPU to
-                                switch between two frequencies (if
-                                appropriate, else specify
-                                CPUFREQ_ETERNAL)
+                                switch between two frequencies in
+                                nanoseconds (if appropriate, else
+                                specify CPUFREQ_ETERNAL)
 
 policy->cur                     The current operating frequency of
                                 this CPU (if appropriate)
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 2a5b850847c0..04f6b32993e6 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -203,6 +203,17 @@ scaling_cur_freq :		Current frequency of the CPU as determined by
                                 the frequency the kernel thinks the CPU runs
                                 at.
 
+bios_limit :                    If the BIOS tells the OS to limit a CPU to
+                                lower frequencies, the user can read out the
+                                maximum available frequency from this file.
+                                This typically can happen through (often not
+                                intended) BIOS settings, restrictions
+                                triggered through a service processor or other
+                                BIOS/HW based implementations.
+                                This does not cover thermal ACPI limitations
+                                which can be detected through the generic
+                                thermal driver.
+
 If you have selected the "userspace" governor which allows you to
 set the CPU operating frequency to a specific value, you can read out
 the current frequency in
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index 9d620c153b04..4d4a644b505e 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -49,6 +49,12 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
 additional_cpus=n (*)   Use this to limit hotpluggable cpus. This option sets
                         cpu_possible_map = cpu_present_map + additional_cpus
 
+cede_offline={"off","on"}  Use this option to disable/enable putting offlined
+                            processors to an extended H_CEDE state on
+                            supported pseries platforms.
+                            If nothing is specified,
+                            cede_offline is set to "on".
+
 (*) Option valid only for following architectures
 - ia64
 
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt
index a5009c8300f3..e3a77b215135 100644
--- a/Documentation/device-mapper/snapshot.txt
+++ b/Documentation/device-mapper/snapshot.txt
@@ -8,13 +8,19 @@ the block device which are also writable without interfering with the
 original content;
 *) To create device "forks", i.e. multiple different versions of the
 same data stream.
+*) To merge a snapshot of a block device back into the snapshot's origin
+device.
 
+In the first two cases, dm copies only the chunks of data that get
+changed and uses a separate copy-on-write (COW) block device for
+storage.
 
-In both cases, dm copies only the chunks of data that get changed and
-uses a separate copy-on-write (COW) block device for storage.
+For snapshot merge the contents of the COW storage are merged back into
+the origin device.
 
 
-There are two dm targets available: snapshot and snapshot-origin.
+There are three dm targets available:
+snapshot, snapshot-origin, and snapshot-merge.
 
 *) snapshot-origin <origin>
 
@@ -40,8 +46,25 @@ The difference is that for transient snapshots less metadata must be
 saved on disk - they can be kept in memory by the kernel.
 
 
-How this is used by LVM2
-========================
+* snapshot-merge <origin> <COW device> <persistent> <chunksize>
+
+takes the same table arguments as the snapshot target except it only
+works with persistent snapshots.  This target assumes the role of the
+"snapshot-origin" target and must not be loaded if the "snapshot-origin"
+is still present for <origin>.
+
+Creates a merging snapshot that takes control of the changed chunks
+stored in the <COW device> of an existing snapshot, through a handover
+procedure, and merges these chunks back into the <origin>.  Once merging
+has started (in the background) the <origin> may be opened and the merge
+will continue while I/O is flowing to it.  Changes to the <origin> are
+deferred until the merging snapshot's corresponding chunk(s) have been
+merged.  Once merging has started the snapshot device, associated with
+the "snapshot" target, will return -EIO when accessed.
+
+
+How snapshot is used by LVM2
+============================
 When you create the first LVM2 snapshot of a volume, four dm devices are used:
 
 1) a device containing the original mapping table of the source volume;
@@ -72,3 +95,30 @@ brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
 brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
 brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
 
+
+How snapshot-merge is used by LVM2
+==================================
+A merging snapshot assumes the role of the "snapshot-origin" while
+merging.  As such the "snapshot-origin" is replaced with
+"snapshot-merge".  The "-real" device is not changed and the "-cow"
+device is renamed to <origin name>-cow to aid LVM2's cleanup of the
+merging snapshot after it completes.  The "snapshot" that hands over its
+COW device to the "snapshot-merge" is deactivated (unless using lvchange
+--refresh); but if it is left active it will simply return I/O errors.
+
+A snapshot will merge into its origin with the following command:
+
+lvconvert --merge volumeGroup/snap
+
+we'll now have this situation:
+
+# dmsetup table|grep volumeGroup
+
+volumeGroup-base-real: 0 2097152 linear 8:19 384
+volumeGroup-base-cow: 0 204800 linear 8:19 2097536
+volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
+
+# ls -lL /dev/mapper/volumeGroup-*
+brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+brw-------  1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
+brw-------  1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index e1efc400bed6..e151b2a36267 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -65,6 +65,7 @@ aicdb.h*
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
+av_permissions.h
 bbootsect
 bin2c
 binkernel.spec
@@ -95,12 +96,14 @@ docproc
 elf2ecoff
 elfconfig.h*
 fixdep
+flask.h
 fore200e_mkfirm
 fore200e_pca_fw.c*
 gconf
 gen-devlist
 gen_crc32table
 gen_init_cpio
+genheaders
 genksyms
 *_gray256.c
 ihex2fw
diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb
index bf2a9cdfe7bb..c8238e44ed6b 100644
--- a/Documentation/dvb/README.dvb-usb
+++ b/Documentation/dvb/README.dvb-usb
@@ -85,7 +85,7 @@ http://www.linuxtv.org/wiki/index.php/DVB_USB
              - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
                better settled there (added xfer_ops-struct)
              - created a common files for frontends (mc/p/mb)
-  2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
+  2004-09-28 - added support for a new device (Unknown, vendor ID is Hyper-Paltek)
   2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
                to Amaury Demol for reporting
              - changed usb TS transfer method (several urbs, stopping transfer
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 06f8f46692dc..79c533223762 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -80,7 +80,7 @@ is:
 
         broken_parity_status
 
-as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directorys for
+as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directories for
 PCI devices.
 
 FUTURE HARDWARE SCANNING
@@ -288,9 +288,8 @@ Total UE count that had no information attribute fileY:
 
         'ue_noinfo_count'
 
-        This attribute file displays the number of UEs that
-        have occurred have occurred with  no informations as to which DIMM
-        slot is having errors.
+        This attribute file displays the number of UEs that have occurred
+        with no information as to which DIMM slot is having errors.
 
 
 Total Correctable Errors count attribute file:
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt
index b3e3a0356839..fe79e3c8847d 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -312,10 +312,8 @@ and to the following documentation:
 8. Mailing list
 ---------------
 
-There are several frame buffer device related mailing lists at SourceForge:
-  - linux-fbdev-announce@lists.sourceforge.net, for announcements,
-  - linux-fbdev-user@lists.sourceforge.net, for generic user support,
-  - linux-fbdev-devel@lists.sourceforge.net, for project developers.
+There is a frame buffer device related mailing list at kernel.org:
+linux-fbdev@vger.kernel.org.
 
 Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for
 subscription information and archive browsing.
diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt
index 67dbf442b0b6..f3e046a6a987 100644
--- a/Documentation/fb/viafb.txt
+++ b/Documentation/fb/viafb.txt
@@ -7,7 +7,7 @@
     VIA UniChrome Family(CLE266, PM800 / CN400 / CN300,
                         P4M800CE / P4M800Pro / CN700 / VN800,
                         CX700 / VX700, K8M890, P4M890,
-                        CN896 / P4M900, VX800)
+                        CN896 / P4M900, VX800, VX855)
 
 [Driver features]
 ------------------------
@@ -154,13 +154,6 @@
         0 : No Dual Edge Panel (default)
         1 : Dual Edge Panel
 
-    viafb_video_dev:
-        This option is used to specify video output devices(CRT, DVI, LCD) for
-        duoview case.
-        For example:
-        To output video on DVI, we should use:
-            modprobe viafb viafb_video_dev=DVI...
-
     viafb_lcd_port:
         This option is used to specify LCD output port,
         available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
@@ -181,9 +174,6 @@ Notes:
        and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
        instead of calling common ioctl function FBIOPUT_VSCREENINFO since
        viafb doesn't support multi-head well, or it will cause screen crush.
-    4. VX800 2D accelerator hasn't been supported in this driver yet. When
-       using driver on VX800, the driver will disable the acceleration
-       function as default.
 
 
 [Configure viafb with "fbset" tool]
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index bc693fffabe0..21ab9357326d 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,21 @@ be removed from this file.
 
 ---------------------------
 
+What:   USER_SCHED
+When:   2.6.34
+
+Why:    USER_SCHED was implemented as a proof of concept for group scheduling.
+        The effect of USER_SCHED can already be achieved from userspace with
+        the help of libcgroup. The removal of USER_SCHED will also simplify
+        the scheduler code with the removal of one major ifdef. There are also
+        issues USER_SCHED has with USER_NS. A decision was taken not to fix
+        those and instead remove USER_SCHED. Also new group scheduling
+        features will not be implemented for USER_SCHED.
+
+Who:    Dhaval Giani <dhaval@linux.vnet.ibm.com>
+
+---------------------------
+
 What:   PRISM54
 When:   2.6.34
 
@@ -276,22 +291,6 @@ Who:	Michael Buesch <mb@bu3sch.de>
 
 ---------------------------
 
-What:   usedac i386 kernel parameter
-When:   2.6.27
-Why:    replaced by allowdac and no dac combination
-Who:    Glauber Costa <gcosta@redhat.com>
-
----------------------------
-
-What: print_fn_descriptor_symbol()
-When: October 2009
-Why:  The %pF vsprintf format provides the same functionality in a
-      simpler way.  print_fn_descriptor_symbol() is deprecated but
-      still present to give out-of-tree modules time to change.
-Who:  Bjorn Helgaas <bjorn.helgaas@hp.com>
-
----------------------------
-
 What:   /sys/o2cb symlink
 When:   January 2010
 Why:    /sys/fs/o2cb is the proper location for this information - /sys/o2cb
@@ -302,18 +301,6 @@ Who:	ocfs2-devel@oss.oracle.com
 
 ---------------------------
 
-What:   SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
-        SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
-When:   June 2009
-Why:    A newer version of the options have been introduced in 2005 that
-        removes the limitions of the old API.  The sctp library has been
-        converted to use these new options at the same time.  Any user
-        space app that directly uses the old options should convert to using
-        the new options.
-Who:    Vlad Yasevich <vladislav.yasevich@hp.com>
-
----------------------------
-
 What:   Ability for non root users to shm_get hugetlb pages based on mlock
         resource limits
 When:   2.6.31
@@ -404,15 +391,6 @@ Who:	Alex Chiang <achiang@hp.com>
 
 ---------------------------
 
-What:   i2c-voodoo3 driver
-When:   October 2009
-Why:    Superseded by tdfxfb. I2C/DDC support used to live in a separate
-        driver but this caused driver conflicts.
-Who:    Jean Delvare <khali@linux-fr.org>
-        Krzysztof Helt <krzysztof.h1@wp.pl>
-
----------------------------
-
 What:   CONFIG_RFKILL_INPUT
 When:   2.6.33
 Why:    Should be implemented in userspace, policy daemon.
@@ -489,3 +467,10 @@ Why:	With the recent innovations in CPU hardware acceleration technologies
 Who:    Alok N Kataria <akataria@vmware.com>
 
 ----------------------------
+
+What:   adt7473 hardware monitoring driver
+When:   February 2010
+Why:    Obsoleted by the adt7475 driver.
+Who:    Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index f15621ee5599..7001782ab932 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -36,6 +36,8 @@ dnotify.txt
         - info about directory notification in Linux.
 ecryptfs.txt
         - docs on eCryptfs: stacked cryptographic filesystem for Linux.
+exofs.txt
+        - info, usage, mount options, design about EXOFS.
 ext2.txt
         - info, mount options and specifications for the Ext2 filesystem.
 ext3.txt
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
index 9e94b9491d89..a91e2e2095b0 100644
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -235,6 +235,7 @@ proc files.
                 neg=N   Number of negative lookups made
                 pos=N   Number of positive lookups made
                 crt=N   Number of objects created by lookup
+                tmo=N   Number of lookups timed out and requeued
         Updates n=N     Number of update cookie requests seen
                 nul=N   Number of upd reqs given a NULL parent
                 run=N   Number of upd reqs granted CPU time
@@ -250,8 +251,10 @@ proc files.
                 ok=N    Number of successful alloc reqs
                 wt=N    Number of alloc reqs that waited on lookup completion
                 nbf=N   Number of alloc reqs rejected -ENOBUFS
+                int=N   Number of alloc reqs aborted -ERESTARTSYS
                 ops=N   Number of alloc reqs submitted
                 owt=N   Number of alloc reqs waited for CPU time
+                abt=N   Number of alloc reqs aborted due to object death
         Retrvls n=N     Number of retrieval (read) requests seen
                 ok=N    Number of successful retr reqs
                 wt=N    Number of retr reqs that waited on lookup completion
@@ -261,6 +264,7 @@ proc files.
                 oom=N   Number of retr reqs failed -ENOMEM
                 ops=N   Number of retr reqs submitted
                 owt=N   Number of retr reqs waited for CPU time
+                abt=N   Number of retr reqs aborted due to object death
         Stores  n=N     Number of storage (write) requests seen
                 ok=N    Number of successful store reqs
                 agn=N   Number of store reqs on a page already pending storage
@@ -268,12 +272,37 @@ proc files.
                 oom=N   Number of store reqs failed -ENOMEM
                 ops=N   Number of store reqs submitted
                 run=N   Number of store reqs granted CPU time
+                pgs=N   Number of pages given store req processing time
+                rxd=N   Number of store reqs deleted from tracking tree
+                olm=N   Number of store reqs over store limit
+        VmScan  nos=N   Number of release reqs against pages with no pending store
+                gon=N   Number of release reqs against pages stored by time lock granted
+                bsy=N   Number of release reqs ignored due to in-progress store
+                can=N   Number of page stores cancelled due to release req
         Ops     pend=N  Number of times async ops added to pending queues
                 run=N   Number of times async ops given CPU time
                 enq=N   Number of times async ops queued for processing
+                can=N   Number of async ops cancelled
+                rej=N   Number of async ops rejected due to object lookup/create failure
                 dfr=N   Number of async ops queued for deferred release
                 rel=N   Number of async ops released
                 gc=N    Number of deferred-release async ops garbage collected
+        CacheOp alo=N   Number of in-progress alloc_object() cache ops
+                luo=N   Number of in-progress lookup_object() cache ops
+                luc=N   Number of in-progress lookup_complete() cache ops
+                gro=N   Number of in-progress grab_object() cache ops
+                upo=N   Number of in-progress update_object() cache ops
+                dro=N   Number of in-progress drop_object() cache ops
+                pto=N   Number of in-progress put_object() cache ops
+                syn=N   Number of in-progress sync_cache() cache ops
+                atc=N   Number of in-progress attr_changed() cache ops
+                rap=N   Number of in-progress read_or_alloc_page() cache ops
+                ras=N   Number of in-progress read_or_alloc_pages() cache ops
+                alp=N   Number of in-progress allocate_page() cache ops
+                als=N   Number of in-progress allocate_pages() cache ops
+                wrp=N   Number of in-progress write_page() cache ops
+                ucp=N   Number of in-progress uncache_page() cache ops
+                dsp=N   Number of in-progress dissociate_pages() cache ops
 
 
  (*) /proc/fs/fscache/histogram
@@ -299,6 +328,87 @@ proc files.
      jiffy range covered, and the SECS field the equivalent number of seconds.
 
 
+===========
+OBJECT LIST
+===========
+
+If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a
+list of all the objects currently allocated and allow them to be viewed
+through:
+
+        /proc/fs/fscache/objects
+
+This will look something like:
+
+        [root@andromeda ~]# head /proc/fs/fscache/objects
+        OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
+        ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
+           17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+           1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+
+where the first set of columns before the '|' describe the object:
+
+        COLUMN  DESCRIPTION
+        ======= ===============================================================
+        OBJECT  Object debugging ID (appears as OBJ%x in some debug messages)
+        PARENT  Debugging ID of parent object
+        STAT    Object state
+        CHLDN   Number of child objects of this object
+        OPS     Number of outstanding operations on this object
+        OOP     Number of outstanding child object management operations
+        IPR
+        EX      Number of outstanding exclusive operations
+        READS   Number of outstanding read operations
+        EM      Object's event mask
+        EV      Events raised on this object
+        F       Object flags
+        S       Object slow-work work item flags
+
+and the second set of columns describe the object's cookie, if present:
+
+        COLUMN          DESCRIPTION
+        =============== =======================================================
+        NETFS_COOKIE_DEF Name of netfs cookie definition
+        TY              Cookie type (IX - index, DT - data, hex - special)
+        FL              Cookie flags
+        NETFS_DATA      Netfs private data stored in the cookie
+        OBJECT_KEY      Object key      } 1 column, with separating comma
+        AUX_DATA        Object aux data } presence may be configured
+
+The data shown may be filtered by attaching the a key to an appropriate keyring
+before viewing the file.  Something like:
+
+                keyctl add user fscache:objlist <restrictions> @s
+
+where <restrictions> are a selection of the following letters:
+
+        K       Show hexdump of object key (don't show if not given)
+        A       Show hexdump of object aux data (don't show if not given)
+
+and the following paired letters:
+
+        C       Show objects that have a cookie
+        c       Show objects that don't have a cookie
+        B       Show objects that are busy
+        b       Show objects that aren't busy
+        W       Show objects that have pending writes
+        w       Show objects that don't have pending writes
+        R       Show objects that have outstanding reads
+        r       Show objects that don't have outstanding reads
+        S       Show objects that have slow work queued
+        s       Show objects that don't have slow work queued
+
+If neither side of a letter pair is given, then both are implied.  For example:
+
+        keyctl add user fscache:objlist KB @s
+
+shows objects that are busy, and lists their object keys, but does not dump
+their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
+not implied.
+
+By default all objects and all fields will be shown.
+
+
 =========
 DEBUGGING
 =========
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 2666b1ed5e9e..1902c57b72ef 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -641,7 +641,7 @@ data file must be retired (see the relinquish cookie function below).
 
 Furthermore, note that this does not cancel the asynchronous read or write
 operation started by the read/alloc and write functions, so the page
-invalidation and release functions must use:
+invalidation functions must use:
 
         bool fscache_check_page_write(struct fscache_cookie *cookie,
                                       struct page *page);
@@ -654,6 +654,25 @@ to see if a page is being written to the cache, and:
 to wait for it to finish if it is.
 
 
+When releasepage() is being implemented, a special FS-Cache function exists to
+manage the heuristics of coping with vmscan trying to eject pages, which may
+conflict with the cache trying to write pages to the cache (which may itself
+need to allocate memory):
+
+        bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+                                        struct page *page,
+                                        gfp_t gfp);
+
+This takes the netfs cookie, and the page and gfp arguments as supplied to
+releasepage().  It will return false if the page cannot be released yet for
+some reason and if it returns true, the page has been uncached and can now be
+released.
+
+To make a page available for release, this function may wait for an outstanding
+storage request to complete, or it may attempt to cancel the storage request -
+in which case the page will not be stored in the cache this time.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================
diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt
index 0ced74c2f73c..abd2a9b5b787 100644
--- a/Documentation/filesystems/exofs.txt
+++ b/Documentation/filesystems/exofs.txt
@@ -60,13 +60,13 @@ USAGE
 
    mkfs.exofs --pid=65536 --format /dev/osd0
 
-   The --format is optional if not specified no OSD_FORMAT will be
-   preformed and a clean file system will be created in the specified pid,
+   The --format is optional. If not specified, no OSD_FORMAT will be
+   performed and a clean file system will be created in the specified pid,
    in the available space of the target. (Use --format=size_in_meg to limit
    the total LUN space available)
 
-   If pid already exist it will be deleted and a new one will be created in it's
-   place. Be careful.
+   If pid already exists, it will be deleted and a new one will be created in
+   its place. Be careful.
 
    An exofs lives inside a single OSD partition. You can create multiple exofs
    filesystems on the same device using multiple pids.
@@ -81,7 +81,7 @@ USAGE
 
 7. For reference (See do-exofs example script):
         do-exofs start - an example of how to perform the above steps.
-        do-exofs stop -  an example of how to unmount the file system.
+        do-exofs stop - an example of how to unmount the file system.
         do-exofs format - an example of how to format and mkfs a new exofs.
 
 8. Extra compilation flags (uncomment in fs/exofs/Kbuild):
@@ -104,8 +104,8 @@ Where:
     exofs specific options: Options are separated by commas (,)
                 pid=<integer> - The partition number to mount/create as
                                 container of the filesystem.
-                                This option is mandatory
-                to=<integer>  - Timeout in ticks for a single command
+                                This option is mandatory.
+                to=<integer>  - Timeout in ticks for a single command.
                                 default is (60 * HZ) [for debugging only]
 
 ===============================================================================
@@ -116,7 +116,7 @@ DESIGN
   with a special ID (defined in common.h).
   Information included in the file system control block is used to fill the
   in-memory superblock structure at mount time. This object is created before
-  the file system is used by mkexofs.c It contains information such as:
+  the file system is used by mkexofs.c. It contains information such as:
         - The file system's magic number
         - The next inode number to be allocated
 
@@ -134,8 +134,8 @@ DESIGN
   attributes. This applies to both regular files and other types (directories,
   device files, symlinks, etc.).
 
-* Credentials are generated per object (inode and superblock) when they is
-  created in memory (read off disk or created). The credential works for all
+* Credentials are generated per object (inode and superblock) when they are
+  created in memory (read from disk or created). The credential works for all
   operations and is used as long as the object remains in memory.
 
 * Async OSD operations are used whenever possible, but the target may execute
@@ -145,7 +145,8 @@ DESIGN
   from executing in reverse order:
         - The following are handled with the OBJ_CREATED and OBJ_2BCREATED
           flags. OBJ_CREATED is set when we know the object exists on the OSD -
-          in create's callback function, and when we successfully do a read_inode.
+          in create's callback function, and when we successfully do a
+          read_inode.
           OBJ_2BCREATED is set in the beginning of the create function, so we
           know that we should wait.
                 - create/delete: delete should wait until the object is created
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 05d5cf1d743f..867c5b50cb42 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -32,8 +32,8 @@ journal_dev=devnum	When the external journal device's major/minor numbers
                         identified through its new major/minor numbers encoded
                         in devnum.
 
-noload                  Don't load the journal on mounting. Note that this forces
-                        mount of inconsistent filesystem, which can lead to
+norecovery              Don't load the journal on mounting. Note that this forces
+noload                  mount of inconsistent filesystem, which can lead to
                         various problems.
 
 data=journal            All data are committed into the journal prior to being
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 6d94e0696f8c..af6885c3c821 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -153,8 +153,8 @@ journal_dev=devnum	When the external journal device's major/minor numbers
                         identified through its new major/minor numbers encoded
                         in devnum.
 
-noload                  Don't load the journal on mounting.  Note that
-                        if the filesystem was not unmounted cleanly,
+norecovery              Don't load the journal on mounting.  Note that
+noload                  if the filesystem was not unmounted cleanly,
                         skipping the journal replay will lead to the
                         filesystem containing inconsistencies that can
                         lead to any number of problems.
@@ -353,6 +353,12 @@ noauto_da_alloc		replacing existing files via patterns such as
                         system crashes before the delayed allocation
                         blocks are forced to disk.
 
+discard         Controls whether ext4 should issue discard/TRIM
+nodiscard(*)            commands to the underlying block device when
+                        blocks are freed.  This is useful for SSD devices
+                        and sparse/thinly-provisioned LUNs, but it is off
+                        by default until sufficient testing has been done.
+
 Data Mode
 =========
 There are 3 different data modes:
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index 01539f410676..4949fcaa6b6a 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -49,8 +49,7 @@ Mount options
 NILFS2 supports the following mount options:
 (*) == default
 
-barrier=on(*)           This enables/disables barriers. barrier=off disables
-                        it, barrier=on enables it.
+nobarrier               Disables barriers.
 errors=continue(*)      Keep going on a filesystem error.
 errors=remount-ro       Remount the filesystem read-only on an error.
 errors=panic            Panic and halt the machine if an error occurs.
@@ -71,6 +70,10 @@ order=strict		Apply strict in-order semantics that preserves sequence
                         blocks.  That means, it is guaranteed that no
                         overtaking of events occurs in the recovered file
                         system after a crash.
+norecovery              Disable recovery of the filesystem on mount.
+                        This disables every write access on the device for
+                        read-only mounts or snapshots.  This option will fail
+                        for r/w mounts on an unclean volume.
 
 NILFS2 usage
 ============
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index c2a0871280a0..c58b9f5ba002 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -20,15 +20,16 @@ Lots of code taken from ext3 and other projects.
 Authors in alphabetical order:
 Joel Becker   <joel.becker@oracle.com>
 Zach Brown    <zach.brown@oracle.com>
-Mark Fasheh   <mark.fasheh@oracle.com>
+Mark Fasheh   <mfasheh@suse.com>
 Kurt Hackel   <kurt.hackel@oracle.com>
+Tao Ma        <tao.ma@oracle.com>
 Sunil Mushran <sunil.mushran@oracle.com>
 Manish Singh  <manish.singh@oracle.com>
+Tiger Yang    <tiger.yang@oracle.com>
 
 Caveats
 =======
 Features which OCFS2 does not support yet:
-        - quotas
         - Directory change notification (F_NOTIFY)
         - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 
@@ -70,7 +71,6 @@ commit=nrsec	(*)	Ocfs2 can be told to sync all its data and metadata
                         performance.
 localalloc=8(*)         Allows custom localalloc size in MB. If the value is too
                         large, the fs will silently revert it to the default.
-                        Localalloc is not enabled for local mounts.
 localflocks             This disables cluster aware flock.
 inode64                 Indicates that Ocfs2 is allowed to create inodes at
                         any location in the filesystem, including those which
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 2c48f945546b..220cc6376ef8 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -38,6 +38,7 @@ Table of Contents
   3.3   /proc/<pid>/io - Display the IO accounting fields
   3.4   /proc/<pid>/coredump_filter - Core dump filtering settings
   3.5   /proc/<pid>/mountinfo - Information about mounts
+  3.6   /proc/<pid>/comm  & /proc/<pid>/task/<tid>/comm
 
 
 ------------------------------------------------------------------------------
@@ -1072,7 +1073,8 @@ second).  The meanings of the columns are as follows, from left to right:
 - irq: servicing interrupts
 - softirq: servicing softirqs
 - steal: involuntary wait
-- guest: running a guest
+- guest: running a normal guest
+- guest_nice: running a niced guest
 
 The "intr" line gives counts of interrupts  serviced since boot time, for each
 of the  possible system interrupts.   The first  column  is the  total of  all
@@ -1088,8 +1090,8 @@ The "processes" line gives the number  of processes and threads created, which
 includes (but  is not limited  to) those  created by  calls to the  fork() and
 clone() system calls.
 
-The  "procs_running" line gives the  number of processes  currently running on
-CPUs.
+The "procs_running" line gives the total number of threads that are
+running or ready to run (i.e., the total number of runnable threads).
 
 The   "procs_blocked" line gives  the  number of  processes currently blocked,
 waiting for I/O to complete.
@@ -1408,3 +1410,11 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+
+3.6     /proc/<pid>/comm  & /proc/<pid>/task/<tid>/comm
+--------------------------------------------------------
+These files provide a method to access a tasks comm value. It also allows for
+a task to set its own or one of its thread siblings comm value. The comm value
+is limited in size compared to the cmdline value, so writing anything longer
+then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
+comm value.
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
index 0d15ebccf5b0..a1e2e0dda907 100644
--- a/Documentation/filesystems/seq_file.txt
+++ b/Documentation/filesystems/seq_file.txt
@@ -248,9 +248,7 @@ code, that is done in the initialization code in the usual way:
         {
                 struct proc_dir_entry *entry;
 
-                entry = create_proc_entry("sequence", 0, NULL);
-                if (entry)
-                        entry->proc_fops = &ct_file_ops;
+                proc_create("sequence", 0, NULL, &ct_file_ops);
                 return 0;
         }
 
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 623f094c9d8d..3de2f32edd90 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -472,7 +472,7 @@ __sync_single_inode) to check if ->writepages has been successful in
 writing out the whole address_space.
 
 The Writeback tag is used by filemap*wait* and sync_page* functions,
-via wait_on_page_writeback_range, to wait for all writeback to
+via filemap_fdatawait_range, to wait for all writeback to
 complete.  While waiting ->sync_page (if defined) will be called on
 each page that is found to require writeback.
 
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index fa4dc077ae0e..1866c27eec69 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -380,7 +380,7 @@ rare; use gpiochip_remove() when it is unavoidable.
 
 Most often a gpio_chip is part of an instance-specific structure with state
 not exposed by the GPIO interfaces, such as addressing, power management,
-and more.  Chips such as codecs will have complex non-GPIO state,
+and more.  Chips such as codecs will have complex non-GPIO state.
 
 Any debugfs dump method should normally ignore signals which haven't been
 requested as GPIOs.  They can use gpiochip_is_requested(), which returns
@@ -531,7 +531,14 @@ and have the following read/write attributes:
                 This file exists only if the pin can be configured as an
                 interrupt generating input pin.
 
-GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
+        "active_low" ... reads as either 0 (false) or 1 (true).  Write
+                any nonzero value to invert the value attribute both
+                for reading and writing.  Existing and subsequent
+                poll(2) support configuration via the edge attribute
+                for "rising" and "falling" edges will follow this
+                setting.
+
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
 controller implementing GPIOs starting at #42) and have the following
 read-only attributes:
 
@@ -566,6 +573,8 @@ requested using gpio_request():
         int gpio_export_link(struct device *dev, const char *name,
                 unsigned gpio)
 
+        /* change the polarity of a GPIO node in sysfs */
+        int gpio_sysfs_set_active_low(unsigned gpio, int value);
 
 After a kernel driver requests a GPIO, it may only be made available in
 the sysfs interface by gpio_export().  The driver can control whether the
@@ -580,3 +589,9 @@ After the GPIO has been exported, gpio_export_link() allows creating
 symlinks from elsewhere in sysfs to the GPIO sysfs node.  Drivers can
 use this to provide the interface under their own device in sysfs with
 a descriptive name.
+
+Drivers can use gpio_sysfs_set_active_low() to hide GPIO line polarity
+differences between boards from user space.  This only affects the
+sysfs interface.  Polarity change can be done both before and after
+gpio_export(), and previously enabled poll(2) support for either
+rising or falling edge will be reconfigured to follow this setting.
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 1cbf671822e2..446612bd1fb9 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -9,6 +9,8 @@ Supported chips:
 
 Author: Darrick J. Wong
 
+This driver is depreacted, please use the adt7475 driver instead.
+
 Description
 -----------
 
diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
index a2b1abec850e..0502f2b464e1 100644
--- a/Documentation/hwmon/adt7475
+++ b/Documentation/hwmon/adt7475
@@ -1,87 +1,117 @@
-This describes the interface for the ADT7475 driver:
-
-(there are 4 fans, numbered fan1 to fan4):
-
-fanX_input              Read the current speed of the fan (in RPMs)
-fanX_min                Read/write the minimum speed of the fan.  Dropping
-                        below this sets an alarm.
-
-(there are three PWMs, numbered pwm1 to pwm3):
-
-pwmX                    Read/write the current duty cycle of the PWM.  Writes
-                        only have effect when auto mode is turned off (see
-                        below).  Range is 0 - 255.
-
-pwmX_enable             Fan speed control method:
-
-                        0 - No control (fan at full speed)
-                        1 - Manual fan speed control (using pwm[1-*])
-                        2 - Automatic fan speed control
-
-pwmX_auto_channels_temp Select which channels affect this PWM
-
-                        1 - TEMP1 controls PWM
-                        2 - TEMP2 controls PWM
-                        4 - TEMP3 controls PWM
-                        6 - TEMP2 and TEMP3 control PWM
-                        7 - All three inputs control PWM
-
-pwmX_freq               Read/write the PWM frequency in Hz. The number
-                        should be one of the following:
-
-                        11 Hz
-                        14 Hz
-                        22 Hz
-                        29 Hz
-                        35 Hz
-                        44 Hz
-                        58 Hz
-                        88 Hz
-
-pwmX_auto_point1_pwm    Read/write the minimum PWM duty cycle in automatic mode
-
-pwmX_auto_point2_pwm    Read/write the maximum PWM duty cycle in automatic mode
-
-(there are three temperature settings numbered temp1 to temp3):
-
-tempX_input             Read the current temperature.  The value is in milli
-                        degrees of Celsius.
-
-tempX_max               Read/write the upper temperature limit - exceeding this
-                        will cause an alarm.
-
-tempX_min               Read/write the lower temperature limit - exceeding this
-                        will cause an alarm.
-
-tempX_offset            Read/write the temperature adjustment offset
-
-tempX_crit              Read/write the THERM limit for remote1.
-
-tempX_crit_hyst         Set the temperature value below crit where the
-                        fans will stay on - this helps drive the temperature
-                        low enough so it doesn't stay near the edge and
-                        cause THERM to keep tripping.
-
-tempX_auto_point1_temp  Read/write the minimum temperature where the fans will
-                        turn on in automatic mode.
-
-tempX_auto_point2_temp  Read/write the maximum temperature over which the fans
-                        will run in automatic mode.  tempX_auto_point1_temp
-                        and tempX_auto_point2_temp together define the
-                        range of automatic control.
-
-tempX_alarm             Read a 1 if the max/min alarm is set
-tempX_fault             Read a 1 if either temp1 or temp3 diode has a fault
-
-(There are two voltage settings, in1 and in2):
-
-inX_input               Read the current voltage on VCC.  Value is in
-                        millivolts.
-
-inX_min                 read/write the minimum voltage limit.
-                        Dropping below this causes an alarm.
-
-inX_max                 read/write the maximum voltage limit.
-                        Exceeding this causes an alarm.
-
-inX_alarm               Read a 1 if the max/min alarm is set.
+Kernel driver adt7475
+=====================
+
+Supported chips:
+  * Analog Devices ADT7473
+    Prefix: 'adt7473'
+    Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+    Datasheet: Publicly available at the On Semiconductors website
+  * Analog Devices ADT7475
+    Prefix: 'adt7475'
+    Addresses scanned: I2C 0x2E
+    Datasheet: Publicly available at the On Semiconductors website
+  * Analog Devices ADT7476
+    Prefix: 'adt7476'
+    Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+    Datasheet: Publicly available at the On Semiconductors website
+  * Analog Devices ADT7490
+    Prefix: 'adt7490'
+    Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+    Datasheet: Publicly available at the On Semiconductors website
+
+Authors:
+        Jordan Crouse
+        Hans de Goede
+        Darrick J. Wong (documentation)
+        Jean Delvare
+
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7473, ADT7475,
+ADT7476 and ADT7490 chip family. The ADT7473 and ADT7475 differ only in
+minor details. The ADT7476 has additional features, including extra voltage
+measurement inputs and VID support. The ADT7490 also has additional
+features, including extra voltage measurement inputs and PECI support. All
+the supported chips will be collectively designed by the name "ADT747x" in
+the rest of this document.
+
+The ADT747x uses the 2-wire interface compatible with the SMBus 2.0
+specification. Using an analog to digital converter it measures three (3)
+temperatures and two (2) or more voltages. It has four (4) 16-bit counters
+for measuring fan speed. There are three (3) PWM outputs that can be used
+to control fan speed.
+
+A sophisticated control system for the PWM outputs is designed into the
+ADT747x that allows fan speed to be adjusted automatically based on any of the
+three temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT747x will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.
+This feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT747x will signal an ALARM if
+any measured value exceeds either limit.
+
+The ADT747x samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
+
+Chip Differences Summary
+------------------------
+
+ADT7473:
+  * 2 voltage inputs
+  * system acoustics optimizations (not implemented)
+
+ADT7475:
+  * 2 voltage inputs
+
+ADT7476:
+  * 5 voltage inputs
+  * VID support
+
+ADT7490:
+  * 6 voltage inputs
+  * 1 Imon input (not implemented)
+  * PECI support (not implemented)
+  * 2 GPIO pins (not implemented)
+  * system acoustics optimizations (not implemented)
+
+Special Features
+----------------
+
+The ADT747x has a 10-bit ADC and can therefore measure temperatures
+with a resolution of 0.25 degree Celsius. Temperature readings can be
+configured either for two's complement format or "Offset 64" format,
+wherein 64 is subtracted from the raw value to get the temperature value.
+
+The datasheet is very detailed and describes a procedure for determining
+an optimal configuration for the automatic PWM control.
+
+Fan Speed Control
+-----------------
+
+The driver exposes two trip points per PWM channel.
+
+point1: Set the PWM speed at the lower temperature bound
+point2: Set the PWM speed at the higher temperature bound
+
+The ADT747x will scale the PWM linearly between the lower and higher PWM
+speed when the temperature is between the two temperature boundaries.
+Temperature boundaries are associated to temperature channels rather than
+PWM outputs, and a given PWM output can be controlled by several temperature
+channels. As a result, the ADT747x may compute more than one PWM value
+for a channel at a given time, in which case the maximum value (fastest
+fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
+
+Fan speed may be set to maximum when the temperature sensor associated with
+the PWM control exceeds temp#_max.
+
+Notes
+-----
+
+The nVidia binary driver presents an ADT7473 chip via an on-card i2c bus.
+Unfortunately, they fail to set the i2c adapter class, so this driver may
+fail to find the chip until the nvidia driver is patched.
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index bee4c30bc1e2..a7952c2bd959 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -14,6 +14,10 @@ Supported chips:
     Prefix: 'f71882fg'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71889FG
+    Prefix: 'f71889fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Should become available on the Fintek website soon
   * Fintek F8000
     Prefix: 'f8000'
     Addresses scanned: none, address read from Super I/O config space
@@ -51,6 +55,12 @@ supported. The right one to use depends on external circuitry on the
 motherboard, so the driver assumes that the BIOS set the method
 properly.
 
+Note that the lowest numbered temperature zone trip point corresponds to
+to the border between the highest and one but highest temperature zones, and
+vica versa. So the temperature zone trip points 1-4 (or 1-2) go from high temp
+to low temp! This is how things are implemented in the IC, and the driver
+mimicks this.
+
 There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC
 voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM
 mode where the actual RPM of the fan (as measured) is controlled and the speed
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 659315d98e00..f9ba96c0ac4a 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -86,7 +86,6 @@ The IT8712F and IT8716F additionally feature VID inputs, used to report
 the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
 the IT8716F and late IT8712F have 6. They are shared with other functions
 though, so the functionality may not be available on a given system.
-The driver dumbly assume it is there.
 
 The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
 is stored in the Super-I/O configuration space. Due to technical limitations,
diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
index effe949a7282..06534f25e643 100644
--- a/Documentation/hwmon/lis3lv02d
+++ b/Documentation/hwmon/lis3lv02d
@@ -3,7 +3,8 @@ Kernel driver lis3lv02d
 
 Supported chips:
 
-  * STMicroelectronics LIS3LV02DL and LIS3LV02DQ
+  * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision)
+  * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits)
 
 Authors:
         Yan Burman <burman.yan@gmail.com>
@@ -13,32 +14,52 @@ Authors:
 Description
 -----------
 
-This driver provides support for the accelerometer found in various HP
-laptops sporting the feature officially called "HP Mobile Data
-Protection System 3D" or "HP 3D DriveGuard". It detects automatically
-laptops with this sensor. Known models (for now the HP 2133, nc6420,
-nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
-automatically oriented on standard way (eg: you can directly play
-neverball).  The accelerometer data is readable via
-/sys/devices/platform/lis3lv02d.
+This driver provides support for the accelerometer found in various HP laptops
+sporting the feature officially called "HP Mobile Data Protection System 3D" or
+"HP 3D DriveGuard". It detects automatically laptops with this sensor. Known
+models (full list can be found in drivers/hwmon/hp_accel.c) will have their
+axis automatically oriented on standard way (eg: you can directly play
+neverball). The accelerometer data is readable via
+/sys/devices/platform/lis3lv02d. Reported values are scaled
+to mg values (1/1000th of earth gravity).
 
 Sysfs attributes under /sys/devices/platform/lis3lv02d/:
 position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-calibrate - read: values (x, y, z) that are used as the base for input
-                  class device operation.
-            write: forces the base to be recalibrated with the current
-                   position.
-rate - reports the sampling rate of the accelerometer device in HZ
+rate - read reports the sampling rate of the accelerometer device in HZ.
+        write changes sampling rate of the accelerometer device.
+        Only values which are supported by HW are accepted.
+selftest - performs selftest for the chip as specified by chip manufacturer.
 
 This driver also provides an absolute input class device, allowing
-the laptop to act as a pinball machine-esque joystick.
+the laptop to act as a pinball machine-esque joystick. Joystick device can be
+calibrated. Joystick device can be in two different modes.
+By default output values are scaled between -32768 .. 32767. In joystick raw
+mode, joystick and sysfs position entry have the same scale. There can be
+small difference due to input system fuzziness feature.
+Events are also available as input event device.
+
+Selftest is meant only for hardware diagnostic purposes. It is not meant to be
+used during normal operations. Position data is not corrupted during selftest
+but interrupt behaviour is not guaranteed to work reliably. In test mode, the
+sensing element is internally moved little bit. Selftest measures difference
+between normal mode and test mode. Chip specifications tell the acceptance
+limit for each type of the chip. Limits are provided via platform data
+to allow adjustment of the limits without a change to the actual driver.
+Seltest returns either "OK x y z" or "FAIL x y z" where x, y and z are
+measured difference between modes. Axes are not remapped in selftest mode.
+Measurement values are provided to help HW diagnostic applications to make
+final decision.
+
+On HP laptops, if the led infrastructure is activated, support for a led
+indicating disk protection will be provided as /sys/class/leds/hp::hddprotect.
 
 Another feature of the driver is misc device called "freefall" that
 acts similar to /dev/rtc and reacts on free-fall interrupts received
 from the device. It supports blocking operations, poll/select and
 fasync operation modes. You must read 1 bytes from the device.  The
 result is number of free-fall interrupts since the last successful
-read (or 255 if number of interrupts would not fit).
+read (or 255 if number of interrupts would not fit). See the hpfall.c
+file for an example on using the device.
 
 
 Axes orientation
@@ -55,7 +76,7 @@ the accelerometer are converted into a "standard" organisation of the axes
  * If the laptop is put upside-down, Z becomes negative
 
 If your laptop model is not recognized (cf "dmesg"), you can send an
-email to the authors to add it to the database.  When reporting a new
+email to the maintainer to add it to the database.  When reporting a new
 laptop, please include the output of "dmidecode" plus the value of
 /sys/devices/platform/lis3lv02d/position in these four cases.
 
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
new file mode 100644
index 000000000000..044531a86405
--- /dev/null
+++ b/Documentation/hwmon/mc13783-adc
@@ -0,0 +1,50 @@
+Kernel driver mc13783-adc
+=========================
+
+Supported chips:
+  * Freescale Atlas MC13783
+    Prefix: 'mc13783_adc'
+    Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+
+Authors:
+    Sascha Hauer <s.hauer@pengutronix.de>
+    Luotao Fu <l.fu@pengutronix.de>
+
+Description
+-----------
+
+The Freescale MC13783 is a Power Management and Audio Circuit. Among
+other things it contains a 10-bit A/D converter. The converter has 16
+channels which can be used in different modes.
+The A/D converter has a resolution of 2.25mV. Channels 0-4 have
+a dedicated meaning with chip internal scaling applied. Channels 5-7
+can be used as general purpose inputs or alternatively in a dedicated
+mode. Channels 12-15 are occupied by the touchscreen if it's active.
+
+Currently the driver only supports channels 2 and 5-15 with no alternative
+modes for channels 5-7.
+
+See this table for the meaning of the different channels and their chip
+internal scaling:
+
+Channel Signal                                          Input Range     Scaling
+-------------------------------------------------------------------------------
+0       Battery Voltage (BATT)                          2.50 - 4.65V    -2.40V
+1       Battery Current (BATT - BATTISNS)               -50 - 50 mV     x20
+2       Application Supply (BP)                         2.50 - 4.65V    -2.40V
+3       Charger Voltage (CHRGRAW)                       0 - 10V /       /5
+                                                        0 - 20V         /10
+4       Charger Current (CHRGISNSP-CHRGISNSN)           -0.25V - 0.25V  x4
+5       General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V       No
+6       General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V /     No /
+                                                        1.50 - 3.50V    -1.20V
+7       General Purpose ADIN7 / UID / Die Temperature   0 - 2.30V /     No /
+                                                        0 - 2.55V /     x0.9 / No
+8       General Purpose ADIN8                           0 - 2.30V       No
+9       General Purpose ADIN9                           0 - 2.30V       No
+10      General Purpose ADIN10                          0 - 2.30V       No
+11      General Purpose ADIN11                          0 - 2.30V       No
+12      General Purpose TSX1 / Touchscreen X-plate 1    0 - 2.30V       No
+13      General Purpose TSX2 / Touchscreen X-plate 2    0 - 2.30V       No
+14      General Purpose TSY1 / Touchscreen Y-plate 1    0 - 2.30V       No
+15      General Purpose TSY2 / Touchscreen Y-plate 2    0 - 2.30V       No
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 82def883361b..3de6b0bcb147 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -225,8 +225,6 @@ pwm[1-*]_auto_point[1-*]_temp_hyst
                 to PWM output channels.
                 RW
 
-OR
-
 temp[1-*]_auto_point[1-*]_pwm
 temp[1-*]_auto_point[1-*]_temp
 temp[1-*]_auto_point[1-*]_temp_hyst
@@ -235,6 +233,15 @@ temp[1-*]_auto_point[1-*]_temp_hyst
                 to temperature channels.
                 RW
 
+There is a third case where trip points are associated to both PWM output
+channels and temperature channels: the PWM values are associated to PWM
+output channels while the temperature values are associated to temperature
+channels. In that case, the result is determined by the mapping between
+temperature inputs and PWM outputs. When several temperature inputs are
+mapped to a given PWM output, this leads to several candidate PWM values.
+The actual result is up to the chip, but in general the highest candidate
+value (fastest fan speed) wins.
+
 
 ****************
 * Temperatures *
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 02b74899edaf..b7e42ec4b26b 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -81,8 +81,14 @@ pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
            0 (stop) to 255 (full)
 
 pwm[1-4]_enable - this file controls mode of fan/temperature control:
-        * 1 Manual Mode, write to pwm file any value 0-255 (full speed)
-        * 2 Thermal Cruise
+        * 1 Manual mode, write to pwm file any value 0-255 (full speed)
+        * 2 "Thermal Cruise" mode
+        * 3 "Fan Speed Cruise" mode
+        * 4 "Smart Fan III" mode
+
+pwm[1-4]_mode - controls if output is PWM or DC level
+        * 0 DC output (0 - 12v)
+        * 1 PWM output
 
 Thermal Cruise mode
 -------------------
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 6ee36dbafd64..44dd2bcc72bd 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -32,8 +32,6 @@ Authors:
 Module Parameters
 -----------------
 
-* force_addr: int
-  Initialize the ISA address of the sensors
 * force_i2c: int
   Initialize the I2C address of the sensors
 * init: int
@@ -70,3 +68,30 @@ doesn't help, you may just ignore the bogus VID reading with no harm done.
 For further information on this driver see the w83781d driver documentation.
 
 [1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid
+
+Forcing the address
+-------------------
+
+The driver used to have a module parameter named force_addr, which could
+be used to force the base I/O address of the hardware monitoring block.
+This was meant as a workaround for mainboards with a broken BIOS. This
+module parameter is gone for technical reasons. If you need this feature,
+you can obtain the same result by using the isaset tool (part of
+lm-sensors) before loading the driver:
+
+# Enter the Super I/O config space
+isaset -y -f 0x2e 0x87
+isaset -y -f 0x2e 0x87
+
+# Select the hwmon logical device
+isaset -y 0x2e 0x2f 0x07 0x0b
+
+# Set the base I/O address (to 0x290 in this example)
+isaset -y 0x2e 0x2f 0x60 0x02
+isaset -y 0x2e 0x2f 0x61 0x90
+
+# Exit the Super-I/O config space
+isaset -y -f 0x2e 0xaa
+
+The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
+0x4e/0x4f is also possible.
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index c5b37c570554..ac540c71c7eb 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD SB900
+  * AMD Hudson-2
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/Documentation/i2c/busses/i2c-voodoo3 b/Documentation/i2c/busses/i2c-voodoo3
deleted file mode 100644
index 62d90a454d39..000000000000
--- a/Documentation/i2c/busses/i2c-voodoo3
+++ /dev/null
@@ -1,62 +0,0 @@
-Kernel driver i2c-voodoo3
-
-Supported adapters:
-  * 3dfx Voodoo3 based cards
-  * Voodoo Banshee based cards
-
-Authors: 
-        Frodo Looijaard <frodol@dds.nl>, 
-        Philip Edelbrock <phil@netroedge.com>, 
-        Ralph Metzler <rjkm@thp.uni-koeln.de>,
-        Mark D. Studebaker <mdsxyz123@yahoo.com>
-
-Main contact: Philip Edelbrock <phil@netroedge.com>
-        
-The code is based upon Ralph's test code (he did the hard stuff ;')
-
-Description
------------
-
-The 3dfx Voodoo3 chip contains two I2C interfaces (aka a I2C 'master' or
-'host'). 
-
-The first interface is used for DDC (Data Display Channel) which is a
-serial channel through the VGA monitor connector to a DDC-compliant
-monitor. This interface is defined by the Video Electronics Standards
-Association (VESA). The standards are available for purchase at
-http://www.vesa.org .
-
-The second interface is a general-purpose I2C bus. The intent by 3dfx was
-to allow manufacturers to add extra chips to the video card such as a
-TV-out chip such as the BT869 or possibly even I2C based temperature
-sensors like the ADM1021 or LM75.
-
-Stability
----------
-
-Seems to be stable on the test machine, but needs more testing on other
-machines. Simultaneous accesses of the DDC and I2C busses may cause errors.
-
-Supported Devices
------------------
-
-Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
-3000' which has a tv-out feature (s-video or composite).  According to the
-docs and discussions, this code should work for any Voodoo3 based cards as
-well as Voodoo Banshee based cards.  The DDC interface has been tested on a
-Voodoo Banshee card.
-        
-Issues
-------
-
-Probably many, but it seems to work OK on my system. :')
-
-
-External Device Connection
---------------------------
-
-The digital video input jumpers give availability to the I2C bus. 
-Specifically, pins 13 and 25 (bottom row middle, and bottom right-end) are     
-the I2C clock and I2C data lines, respectively. +5V and GND are probably
-also easily available making the addition of extra I2C/SMBus devices easy
-to implement.
diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub
index 0d8be1c20c16..fa4b669c166b 100644
--- a/Documentation/i2c/i2c-stub
+++ b/Documentation/i2c/i2c-stub
@@ -2,9 +2,9 @@ MODULE: i2c-stub
 
 DESCRIPTION:
 
-This module is a very simple fake I2C/SMBus driver.  It implements four
-types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and
-(r/w) word data.
+This module is a very simple fake I2C/SMBus driver.  It implements five
+types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, (r/w)
+word data, and (r/w) I2C block data.
 
 You need to provide chip addresses as a module parameter when loading this
 driver, which will then only react to SMBus commands to these addresses.
@@ -21,8 +21,8 @@ EEPROMs, among others.
 
 The typical use-case is like this:
         1. load this module
-        2. use i2cset (from lm_sensors project) to pre-load some data
-        3. load the target sensors chip driver module
+        2. use i2cset (from the i2c-tools project) to pre-load some data
+        3. load the target chip driver module
         4. observe its behavior in the kernel log
 
 There's a script named i2c-stub-from-dump in the i2c-tools package which
@@ -33,6 +33,12 @@ PARAMETERS:
 int chip_addr[10]:
         The SMBus addresses to emulate chips at.
 
+unsigned long functionality:
+        Functionality override, to disable some commands. See I2C_FUNC_*
+        constants in <linux/i2c.h> for the suitable values. For example,
+        value 0x1f0000 would only enable the quick, byte and byte data
+        commands.
+
 CAVEATS:
 
 If your target driver polls some byte or word waiting for it to change, the
diff --git a/Documentation/i2c/old-module-parameters b/Documentation/i2c/old-module-parameters
new file mode 100644
index 000000000000..8e2b629d533c
--- /dev/null
+++ b/Documentation/i2c/old-module-parameters
@@ -0,0 +1,44 @@
+I2C device driver binding control from user-space
+=================================================
+
+Up to kernel 2.6.32, many i2c drivers used helper macros provided by
+<linux/i2c.h> which created standard module parameters to let the user
+control how the driver would probe i2c buses and attach to devices. These
+parameters were known as "probe" (to let the driver probe for an extra
+address), "force" (to forcibly attach the driver to a given device) and
+"ignore" (to prevent a driver from probing a given address).
+
+With the conversion of the i2c subsystem to the standard device driver
+binding model, it became clear that these per-module parameters were no
+longer needed, and that a centralized implementation was possible. The new,
+sysfs-based interface is described in the documentation file
+"instantiating-devices", section "Method 4: Instantiate from user-space".
+
+Below is a mapping from the old module parameters to the new interface.
+
+Attaching a driver to an I2C device
+-----------------------------------
+
+Old method (module parameters):
+# modprobe <driver> probe=1,0x2d
+# modprobe <driver> force=1,0x2d
+# modprobe <driver> force_<device>=1,0x2d
+
+New method (sysfs interface):
+# echo <device> 0x2d > /sys/bus/i2c/devices/i2c-1/new_device
+
+Preventing a driver from attaching to an I2C device
+---------------------------------------------------
+
+Old method (module parameters):
+# modprobe <driver> ignore=1,0x2f
+
+New method (sysfs interface):
+# echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device
+# modprobe <driver>
+
+Of course, it is important to instantiate the "dummy" device before loading
+the driver. The dummy device will be handled by i2c-core itself, preventing
+other drivers from binding to it later on. If there is a real device at the
+problematic address, and you want another driver to bind to it, then simply
+pass the name of the device in question instead of "dummy".
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 7860aafb483d..0a74603eb671 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -44,7 +44,7 @@ static struct i2c_driver foo_driver = {
         /* if device autodetection is needed: */
         .class          = I2C_CLASS_SOMETHING,
         .detect         = foo_detect,
-        .address_data   = &addr_data,
+        .address_list   = normal_i2c,
 
         .shutdown       = foo_shutdown, /* optional */
         .suspend        = foo_suspend,  /* optional */
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index f9963103ae3d..794941fc9493 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -5,7 +5,7 @@ GigaSet 307x Device Driver
      ------------
 1.1. Hardware
      --------
-     This release supports the connection of the Gigaset 307x/417x family of
+     This driver supports the connection of the Gigaset 307x/417x family of
      ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
      connection. The following devices are reported to be compatible:
 
@@ -33,7 +33,7 @@ GigaSet 307x Device Driver
               http://gigaset307x.sourceforge.net/
 
      We had also reports from users of Gigaset M105 who could use the drivers
-     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.4.)
+     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.)
      If you have another device that works with our driver, please let us know.
 
      Chances of getting an USB device to work are good if the output of
@@ -49,7 +49,7 @@ GigaSet 307x Device Driver
      --------
      The driver works with ISDN4linux and so can be used with any software
      which is able to use ISDN4linux for ISDN connections (voice or data).
-     CAPI4Linux support is planned but not yet available.
+     Experimental Kernel CAPI support is available as a compilation option.
 
      There are some user space tools available at
      http://sourceforge.net/projects/gigaset307x/
@@ -68,22 +68,38 @@ GigaSet 307x Device Driver
      for troubleshooting or to pass module parameters.
 
      The module ser_gigaset provides a serial line discipline N_GIGASET_M101
-     which drives the device through the regular serial line driver. It must
-     be attached to the serial line to which the M101 is connected with the
-     ldattach(8) command (requires util-linux-ng release 2.14 or later), for
-     example:
-         ldattach GIGASET_M101 /dev/ttyS1
+     which uses the regular serial port driver to access the device, and must
+     therefore be attached to the serial device to which the M101 is connected.
+     The ldattach(8) command (included in util-linux-ng release 2.14 or later)
+     can be used for that purpose, for example:
+        ldattach GIGASET_M101 /dev/ttyS1
      This will open the device file, attach the line discipline to it, and
      then sleep in the background, keeping the device open so that the line
      discipline remains active. To deactivate it, kill the daemon, for example
      with
-         killall ldattach
+        killall ldattach
      before disconnecting the device. To have this happen automatically at
      system startup/shutdown on an LSB compatible system, create and activate
      an appropriate LSB startup script /etc/init.d/gigaset. (The init name
      'gigaset' is officially assigned to this project by LANANA.)
      Alternatively, just add the 'ldattach' command line to /etc/rc.local.
 
+     The modules accept the following parameters:
+
+        Module          Parameter  Meaning
+
+        gigaset         debug      debug level (see section 3.2.)
+
+                        startmode  initial operation mode (see section 2.5.):
+        bas_gigaset )              1=ISDN4linux/CAPI (default), 0=Unimodem
+        ser_gigaset )
+        usb_gigaset )   cidmode    initial Call-ID mode setting (see section
+                                   2.5.): 1=on (default), 0=off
+
+     Depending on your distribution you may want to create a separate module
+     configuration file /etc/modprobe.d/gigaset for these, or add them to a
+     custom file like /etc/modprobe.conf.local.
+
 2.2. Device nodes for user space programs
      ------------------------------------
      The device can be accessed from user space (eg. by the user space tools
@@ -93,29 +109,83 @@ GigaSet 307x Device Driver
      - /dev/ttyGU0 for M105 (USB data boxes)
      - /dev/ttyGB0 for the base driver (direct USB connection)
 
-     You can also select a "default device" which is used by the frontends when
+     If you connect more than one device of a type, they will get consecutive
+     device nodes, eg. /dev/ttyGU1 for a second M105.
+
+     You can also set a "default device" for the user space tools to use when
      no device node is given as parameter, by creating a symlink /dev/ttyG to
      one of them, eg.:
 
-        ln -s /dev/ttyGB0 /dev/ttyG
+        ln -s /dev/ttyGB0 /dev/ttyG
+
+     The devices accept the following device specific ioctl calls
+     (defined in gigaset_dev.h):
+
+     ioctl(int fd, GIGASET_REDIR, int *cmd);
+     If cmd==1, the device is set to be controlled exclusively through the
+     character device node; access from the ISDN subsystem is blocked.
+     If cmd==0, the device is set to be used from the ISDN subsystem and does
+     not communicate through the character device node.
+
+     ioctl(int fd, GIGASET_CONFIG, int *cmd);
+     (ser_gigaset and usb_gigaset only)
+     If cmd==1, the device is set to adapter configuration mode where commands
+     are interpreted by the M10x DECT adapter itself instead of being
+     forwarded to the base station. In this mode, the device accepts the
+     commands described in Siemens document "AT-Kommando Alignment M10x Data"
+     for setting the operation mode, associating with a base station and
+     querying parameters like field strengh and signal quality.
+     Note that there is no ioctl command for leaving adapter configuration
+     mode and returning to regular operation. In order to leave adapter
+     configuration mode, write the command ATO to the device.
+
+     ioctl(int fd, GIGASET_BRKCHARS, unsigned char brkchars[6]);
+     (usb_gigaset only)
+     Set the break characters on an M105's internal serial adapter to the six
+     bytes stored in brkchars[]. Unused bytes should be set to zero.
+
+     ioctl(int fd, GIGASET_VERSION, unsigned version[4]);
+     Retrieve version information from the driver. version[0] must be set to
+     one of:
+     - GIGVER_DRIVER: retrieve driver version
+     - GIGVER_COMPAT: retrieve interface compatibility version
+     - GIGVER_FWBASE: retrieve the firmware version of the base
+     Upon return, version[] is filled with the requested version information.
 
 2.3. ISDN4linux
      ----------
      This is the "normal" mode of operation. After loading the module you can
-     set up the ISDN system just as you'd do with any ISDN card.
-     Your distribution should provide some configuration utility.
-     If not, you can use some HOWTOs like
+     set up the ISDN system just as you'd do with any ISDN card supported by
+     the ISDN4Linux subsystem. Most distributions provide some configuration
+     utility. If not, you can use some HOWTOs like
          http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-     If this doesn't work, because you have some recent device like SX100 where
+     If this doesn't work, because you have some device like SX100 where
      debug output (see section 3.2.) shows something like this when dialing
          CMD Received: ERROR
          Available Params: 0
          Connection State: 0, Response: -1
          gigaset_process_response: resp_code -1 in ConState 0 !
          Timeout occurred
-     you might need to use unimodem mode:
-
-2.4. Unimodem mode
+     you probably need to use unimodem mode. (see section 2.5.)
+
+2.4. CAPI
+     ----
+     If the driver is compiled with CAPI support (kernel configuration option
+     GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
+     user space applications. For user space access, the module capi.ko must
+     be loaded. The capiinit command (included in the capi4k-utils package)
+     does this for you.
+
+     The CAPI variant of the driver supports legacy ISDN4Linux applications
+     via the capidrv compatibility driver. The kernel module capidrv.ko must
+     be loaded explicitly with the command
+        modprobe capidrv
+     if needed, and cannot be unloaded again without unloading the driver
+     first. (These are limitations of capidrv.)
+
+     The note about unimodem mode in the preceding section applies here, too.
+
+2.5. Unimodem mode
      -------------
      This is needed for some devices [e.g. SX100] as they have problems with
      the "normal" commands.
@@ -126,9 +196,14 @@ GigaSet 307x Device Driver
      You can switch back using
          gigacontr --mode isdn
 
-     You can also load the driver using e.g.
-         modprobe usb_gigaset startmode=0
-     to prevent the driver from starting in "isdn4linux mode".
+     You can also put the driver directly into Unimodem mode when it's loaded,
+     by passing the module parameter startmode=0 to the hardware specific
+     module, e.g.
+        modprobe usb_gigaset startmode=0
+     or by adding a line like
+        options usb_gigaset startmode=0
+     to an appropriate module configuration file, like /etc/modprobe.d/gigaset
+     or /etc/modprobe.conf.local.
 
      In this mode the device works like a modem connected to a serial port
      (the /dev/ttyGU0, ... mentioned above) which understands the commands
@@ -156,11 +231,10 @@ GigaSet 307x Device Driver
 
         options ppp_async flag_time=0
 
-     to /etc/modprobe.conf. If your distribution has some local module
-     configuration file like /etc/modprobe.conf.local,
-     using that should be preferred.
+     to an appropriate module configuration file, like /etc/modprobe.d/gigaset
+     or /etc/modprobe.conf.local.
 
-2.5. Call-ID (CID) mode
+2.6. Call-ID (CID) mode
      ------------------
      Call-IDs are numbers used to tag commands to, and responses from, the
      Gigaset base in order to support the simultaneous handling of multiple
@@ -181,14 +255,15 @@ GigaSet 307x Device Driver
        settings (CID mode).
      - If you have several DECT data devices (M10x) which you want to use
        in turn, select Unimodem mode by passing the parameter "cidmode=0" to
-       the driver ("modprobe usb_gigaset cidmode=0" or modprobe.conf).
+       the appropriate driver module (ser_gigaset or usb_gigaset).
 
      If you want both of these at once, you are out of luck.
 
-     You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
-     setting (ttyGxy is ttyGU0 or ttyGB0).
+     You can also use the tty class parameter "cidmode" of the device to
+     change its CID mode while the driver is loaded, eg.
+        echo 0 > /sys/class/tty/ttyGU0/cidmode
 
-2.6. Unregistered Wireless Devices (M101/M105)
+2.7. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
      The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
      the M101 and M105 wireless devices to be used as ISDN devices for ISDN
@@ -200,7 +275,7 @@ GigaSet 307x Device Driver
      driver. In that situation, a restricted set of functions is available
      which includes, in particular, those necessary for registering the device
      to a base or for switching it between Fixed Part and Portable Part
-     modes.
+     modes. See the gigacontr(8) manpage for details.
 
 3.   Troubleshooting
      ---------------
@@ -214,9 +289,7 @@ GigaSet 307x Device Driver
 
            options isdn dialtimeout=15
 
-        to /etc/modprobe.conf. If your distribution has some local module
-        configuration file like /etc/modprobe.conf.local,
-        using that should be preferred.
+        to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
 
      Problem:
         Your isdn script aborts with a message about isdnlog.
@@ -228,7 +301,7 @@ GigaSet 307x Device Driver
         You have two or more DECT data adapters (M101/M105) and only the
         first one you turn on works.
      Solution:
-        Select Unimodem mode for all DECT data adapters. (see section 2.4.)
+        Select Unimodem mode for all DECT data adapters. (see section 2.5.)
 
      Problem:
         Messages like this:
@@ -236,7 +309,7 @@ GigaSet 307x Device Driver
         appear in your syslog.
      Solution:
         Check whether your M10x wireless device is correctly registered to the
-        Gigaset base. (see section 2.6.)
+        Gigaset base. (see section 2.7.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------
@@ -256,7 +329,8 @@ GigaSet 307x Device Driver
      The initial value can be set using the debug parameter when loading the
      module "gigaset", e.g. by adding a line
         options gigaset debug=0
-     to /etc/modprobe.conf, ...
+     to your module configuration file, eg. /etc/modprobe.d/gigaset or
+     /etc/modprobe.conf.local.
 
      Generated debugging information can be found
      - as output of the command
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9107b387e91f..c309515ae959 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -85,7 +85,6 @@ parameter is applicable:
         PPT     Parallel port support is enabled.
         PS2     Appropriate PS/2 support is enabled.
         RAM     RAM disk support is enabled.
-        ROOTPLUG The example Root Plug LSM is enabled.
         S390    S390 architecture is enabled.
         SCSI    Appropriate SCSI support is enabled.
                         A lot of drivers has their options described inside of
@@ -345,6 +344,15 @@ and is between 256 and 4096 characters. It is defined in the file
                         Change the amount of debugging information output
                         when initialising the APIC and IO-APIC components.
 
+        show_lapic=     [APIC,X86] Advanced Programmable Interrupt Controller
+                        Limit apic dumping. The parameter defines the maximal
+                        number of local apics being dumped. Also it is possible
+                        to set it to "all" by meaning -- no limit here.
+                        Format: { 1 (default) | 2 | ... | all }.
+                        The parameter valid if only apic=debug or
+                        apic=verbose is specified.
+                        Example: apic=debug show_lapic=all
+
         apm=            [APM] Advanced Power Management
                         See header of arch/x86/kernel/apm_32.c.
 
@@ -779,6 +787,13 @@ and is between 256 and 4096 characters. It is defined in the file
                         by the set_ftrace_notrace file in the debugfs
                         tracing directory.
 
+        ftrace_graph_filter=[function-list]
+                        [FTRACE] Limit the top level callers functions traced
+                        by the function graph tracer at boot up.
+                        function-list is a comma separated list of functions
+                        that can be changed at run time by the
+                        set_graph_function file in the debugfs tracing directory.
+
         gamecon.map[2|3]=
                         [HW,JOY] Multisystem joystick and NES/SNES/PSX pad
                         support via parallel port (up to 5 devices per port)
@@ -1772,6 +1787,11 @@ and is between 256 and 4096 characters. It is defined in the file
                         waiting for the ACK, so if this is set too high
                         interrupts *may* be lost!
 
+        omap_mux=       [OMAP] Override bootloader pin multiplexing.
+                        Format: <mux_mode0.mode_name=value>...
+                        For example, to override I2C bus2:
+                        omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
+
         opl3=           [HW,OSS]
                         Format: <io>
 
@@ -2032,8 +2052,15 @@ and is between 256 and 4096 characters. It is defined in the file
 
         print-fatal-signals=
                         [KNL] debug: print fatal signals
-                        print-fatal-signals=1: print segfault info to
-                        the kernel console.
+
+                        If enabled, warn about various signal handling
+                        related application anomalies: too many signals,
+                        too many POSIX.1 timers, fatal signals causing a
+                        coredump - etc.
+
+                        If you hit the warning due to signal overflow,
+                        you might want to try "ulimit -i unlimited".
+
                         default: off.
 
         printk.time=    Show timing data prefixed to each printk message line
@@ -2164,15 +2191,6 @@ and is between 256 and 4096 characters. It is defined in the file
                         Useful for devices that are detected asynchronously
                         (e.g. USB and MMC devices).
 
-        root_plug.vendor_id=
-                        [ROOTPLUG] Override the default vendor ID
-
-        root_plug.product_id=
-                        [ROOTPLUG] Override the default product ID
-
-        root_plug.debug=
-                        [ROOTPLUG] Enable debugging output
-
         rw              [KNL] Mount root device read-write on boot
 
         S               [KNL] Run init in single mode
@@ -2182,6 +2200,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
         sbni=           [NET] Granch SBNI12 leased line adapter
 
+        sched_debug     [KNL] Enables verbose scheduler debug messages.
+
         sc1200wdt=      [HW,WDT] SC1200 WDT (watchdog) driver
                         Format: <io>[,<timeout>[,<isapnp>]]
 
@@ -2590,6 +2610,9 @@ and is between 256 and 4096 characters. It is defined in the file
         uart6850=       [HW,OSS]
                         Format: <io>,<irq>
 
+        uhash_entries=  [KNL,NET]
+                        Set number of hash buckets for UDP/UDP-Lite connections
+
         uhci-hcd.ignore_oc=
                         [USB] Ignore overcurrent events (default N).
                         Some badly-designed motherboards generate lots of
@@ -2645,6 +2668,8 @@ and is between 256 and 4096 characters. It is defined in the file
                         to a common usb-storage quirk flag as follows:
                                 a = SANE_SENSE (collect more than 18 bytes
                                         of sense data);
+                                b = BAD_SENSE (don't collect more than 18
+                                        bytes of sense data);
                                 c = FIX_CAPACITY (decrease the reported
                                         device capacity by one sector);
                                 h = CAPACITY_HEURISTICS (decrease the
@@ -2704,6 +2729,11 @@ and is between 256 and 4096 characters. It is defined in the file
         vmpoff=         [KNL,S390] Perform z/VM CP command after power off.
                         Format: <command>
 
+        vt.cur_default= [VT] Default cursor shape.
+                        Format: 0xCCBBAA, where AA, BB, and CC are the same as
+                        the parameters of the <Esc>[?A;B;Cc escape sequence;
+                        see VGA-softcursor.txt. Default: 2 = underline.
+
         vt.default_blu= [VT]
                         Format: <blue0>,<blue1>,<blue2>,...,<blue15>
                         Change the default blue palette of the console.
@@ -2729,6 +2759,15 @@ and is between 256 and 4096 characters. It is defined in the file
                         Default is 1, i.e. UTF-8 mode is enabled for all
                         newly opened terminals.
 
+        vt.global_cursor_default=
+                        [VT]
+                        Format=<-1|0|1>
+                        Set system-wide default for whether a cursor
+                        is shown on new VTs. Default is -1,
+                        i.e. cursors will be created by default unless
+                        overridden by individual drivers. 0 will hide
+                        cursors, 1 will display them.
+
         waveartist=     [HW,OSS]
                         Format: <io>,<irq>,<dma>,<dma2>
 
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index 5a4bc8cf6d04..e1a114161027 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -593,6 +593,115 @@ struct kvm_irqchip {
         } chip;
 };
 
+4.27 KVM_XEN_HVM_CONFIG
+
+Capability: KVM_CAP_XEN_HVM
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_xen_hvm_config (in)
+Returns: 0 on success, -1 on error
+
+Sets the MSR that the Xen HVM guest uses to initialize its hypercall
+page, and provides the starting address and size of the hypercall
+blobs in userspace.  When the guest writes the MSR, kvm copies one
+page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
+memory.
+
+struct kvm_xen_hvm_config {
+        __u32 flags;
+        __u32 msr;
+        __u64 blob_addr_32;
+        __u64 blob_addr_64;
+        __u8 blob_size_32;
+        __u8 blob_size_64;
+        __u8 pad2[30];
+};
+
+4.27 KVM_GET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (out)
+Returns: 0 on success, -1 on error
+
+Gets the current timestamp of kvmclock as seen by the current guest. In
+conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+        __u64 clock;  /* kvmclock current value */
+        __u32 flags;
+        __u32 pad[9];
+};
+
+4.28 KVM_SET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (in)
+Returns: 0 on success, -1 on error
+
+Sets the current timestamp of kvmclock to the valued specific in its parameter.
+In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+        __u64 clock;  /* kvmclock current value */
+        __u32 flags;
+        __u32 pad[9];
+};
+
+4.29 KVM_GET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (out)
+Returns: 0 on success, -1 on error
+
+Gets currently pending exceptions, interrupts, and NMIs as well as related
+states of the vcpu.
+
+struct kvm_vcpu_events {
+        struct {
+                __u8 injected;
+                __u8 nr;
+                __u8 has_error_code;
+                __u8 pad;
+                __u32 error_code;
+        } exception;
+        struct {
+                __u8 injected;
+                __u8 nr;
+                __u8 soft;
+                __u8 pad;
+        } interrupt;
+        struct {
+                __u8 injected;
+                __u8 pending;
+                __u8 masked;
+                __u8 pad;
+        } nmi;
+        __u32 sipi_vector;
+        __u32 flags;   /* must be zero */
+};
+
+4.30 KVM_SET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (in)
+Returns: 0 on success, -1 on error
+
+Set pending exceptions, interrupts, and NMIs as well as related states of the
+vcpu.
+
+See KVM_GET_VCPU_EVENTS for the data structure.
+
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 098de5bce00a..42208511b5c0 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -304,7 +304,7 @@ static void *map_zeroed_pages(unsigned int num)
         addr = mmap(NULL, getpagesize() * num,
                     PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
         if (addr == MAP_FAILED)
-                err(1, "Mmaping %u pages of /dev/zero", num);
+                err(1, "Mmapping %u pages of /dev/zero", num);
 
         /*
          * One neat mmap feature is that you can close the fd, and it
diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt
index 9cb9138f7a79..65f4c795015d 100644
--- a/Documentation/lockstat.txt
+++ b/Documentation/lockstat.txt
@@ -62,8 +62,20 @@ applicable).
 It also tracks 4 contention points per class. A contention point is a call site
 that had to wait on lock acquisition.
 
+ - CONFIGURATION
+
+Lock statistics are enabled via CONFIG_LOCK_STATS.
+
  - USAGE
 
+Enable collection of statistics:
+
+# echo 1 >/proc/sys/kernel/lock_stat
+
+Disable collection of statistics:
+
+# echo 0 >/proc/sys/kernel/lock_stat
+
 Look at the current lock statistics:
 
 ( line numbers not part of actual output, done for clarity in the explanation
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 4edd39ec7db9..188f4768f1d5 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -233,9 +233,9 @@ All md devices contain:
 
   resync_start
      The point at which resync should start.  If no resync is needed,
-     this will be a very large number.  At array creation it will
-     default to 0, though starting the array as 'clean' will
-     set it much larger.
+     this will be a very large number (or 'none' since 2.6.30-rc1).  At
+     array creation it will default to 0, though starting the array as
+     'clean' will set it much larger.
 
    new_dev
      This file can be written but not read.  The value written should
@@ -296,6 +296,51 @@ All md devices contain:
      active-idle
          like active, but no writes have been seen for a while (safe_mode_delay).
 
+  bitmap/location
+     This indicates where the write-intent bitmap for the array is
+     stored.
+     It can be one of "none", "file" or "[+-]N".
+     "file" may later be extended to "file:/file/name"
+     "[+-]N" means that many sectors from the start of the metadata.
+       This is replicated on all devices.  For arrays with externally
+       managed metadata, the offset is from the beginning of the
+       device.
+  bitmap/chunksize
+     The size, in bytes, of the chunk which will be represented by a
+     single bit.  For RAID456, it is a portion of an individual
+     device. For RAID10, it is a portion of the array.  For RAID1, it
+     is both (they come to the same thing).
+  bitmap/time_base
+     The time, in seconds, between looking for bits in the bitmap to
+     be cleared. In the current implementation, a bit will be cleared
+     between 2 and 3 times "time_base" after all the covered blocks
+     are known to be in-sync.
+  bitmap/backlog
+     When write-mostly devices are active in a RAID1, write requests
+     to those devices proceed in the background - the filesystem (or
+     other user of the device) does not have to wait for them.
+     'backlog' sets a limit on the number of concurrent background
+     writes.  If there are more than this, new writes will by
+     synchronous.
+  bitmap/metadata
+     This can be either 'internal' or 'external'.
+     'internal' is the default and means the metadata for the bitmap
+     is stored in the first 256 bytes of the allocated space and is
+     managed by the md module.
+     'external' means that bitmap metadata is managed externally to
+     the kernel (i.e. by some userspace program)
+  bitmap/can_clear
+     This is either 'true' or 'false'.  If 'true', then bits in the
+     bitmap will be cleared when the corresponding blocks are thought
+     to be in-sync.  If 'false', bits will never be cleared.
+     This is automatically set to 'false' if a write happens on a
+     degraded array, or if the array becomes degraded during a write.
+     When metadata is managed externally, it should be set to true
+     once the array becomes non-degraded, and this fact has been
+     recorded in the metadata.
+     
+     
+     
 
 As component devices are added to an md array, they appear in the 'md'
 directory as new directories named
@@ -334,8 +379,9 @@ Each directory contains:
         Writing "writemostly" sets the writemostly flag.
         Writing "-writemostly" clears the writemostly flag.
         Writing "blocked" sets the "blocked" flag.
-        Writing "-blocked" clear the "blocked" flag and allows writes
+        Writing "-blocked" clears the "blocked" flag and allows writes
                 to complete.
+        Writing "in_sync" sets the in_sync flag.
 
         This file responds to select/poll. Any change to 'faulty'
         or 'blocked' causes an event.
@@ -372,6 +418,24 @@ Each directory contains:
         array.  If a value less than the current component_size is
         written, it will be rejected.
 
+      recovery_start
+
+        When the device is not 'in_sync', this records the number of
+        sectors from the start of the device which are known to be
+        correct.  This is normally zero, but during a recovery
+        operation is will steadily increase, and if the recovery is
+        interrupted, restoring this value can cause recovery to
+        avoid repeating the earlier blocks.  With v1.x metadata, this
+        value is saved and restored automatically.
+
+        This can be set whenever the device is not an active member of
+        the array, either before the array is activated, or before
+        the 'slot' is set.
+
+        Setting this to 'none' is equivalent to setting 'in_sync'.
+        Setting to any other value also clears the 'in_sync' flag.
+        
+
 
 An active md device will also contain and entry for each active device
 in the array.  These are named
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index bbc8a6a36921..57e7e9cc1870 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -160,12 +160,15 @@ Under each section, you can see 4 files.
 NOTE:
   These directories/files appear after physical memory hotplug phase.
 
-If CONFIG_NUMA is enabled the
-/sys/devices/system/memory/memoryXXX memory section
-directories can also be accessed via symbolic links located in
-the /sys/devices/system/node/node* directories.  For example:
+If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
+via symbolic links located in the /sys/devices/system/node/node* directories.
+
+For example:
 /sys/devices/system/node/node0/memory9 -> ../../memory/memory9
 
+A backlink will also be created:
+/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
 --------------------------------
 4. Physical memory hot-add phase
 --------------------------------
diff --git a/Documentation/misc-devices/ad525x_dpot.txt b/Documentation/misc-devices/ad525x_dpot.txt
new file mode 100644
index 000000000000..0c9413b1cbf3
--- /dev/null
+++ b/Documentation/misc-devices/ad525x_dpot.txt
@@ -0,0 +1,57 @@
+---------------------------------
+  AD525x Digital Potentiometers
+---------------------------------
+
+The ad525x_dpot driver exports a simple sysfs interface.  This allows you to
+work with the immediate resistance settings as well as update the saved startup
+settings.  Access to the factory programmed tolerance is also provided, but
+interpretation of this settings is required by the end application according to
+the specific part in use.
+
+---------
+  Files
+---------
+
+Each dpot device will have a set of eeprom, rdac, and tolerance files.  How
+many depends on the actual part you have, as will the range of allowed values.
+
+The eeprom files are used to program the startup value of the device.
+
+The rdac files are used to program the immediate value of the device.
+
+The tolerance files are the read-only factory programmed tolerance settings
+and may vary greatly on a part-by-part basis.  For exact interpretation of
+this field, please consult the datasheet for your part.  This is presented
+as a hex file for easier parsing.
+
+-----------
+  Example
+-----------
+
+Locate the device in your sysfs tree.  This is probably easiest by going into
+the common i2c directory and locating the device by the i2c slave address.
+
+        # ls /sys/bus/i2c/devices/
+        0-0022  0-0027  0-002f
+
+So assuming the device in question is on the first i2c bus and has the slave
+address of 0x2f, we descend (unrelated sysfs entries have been trimmed).
+
+        # ls /sys/bus/i2c/devices/0-002f/
+        eeprom0 rdac0 tolerance0
+
+You can use simple reads/writes to access these files:
+
+        # cd /sys/bus/i2c/devices/0-002f/
+
+        # cat eeprom0
+        0
+        # echo 10 > eeprom0
+        # cat eeprom0
+        10
+
+        # cat rdac0
+        5
+        # echo 3 > rdac0
+        # cat rdac0
+        3
diff --git a/Documentation/c2port.txt b/Documentation/misc-devices/c2port.txt
index d9bf93ea4398..d9bf93ea4398 100644
--- a/Documentation/c2port.txt
+++ b/Documentation/misc-devices/c2port.txt
diff --git a/Documentation/ics932s401 b/Documentation/misc-devices/ics932s401
index 07a739f406d8..07a739f406d8 100644
--- a/Documentation/ics932s401
+++ b/Documentation/misc-devices/ics932s401
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index d5181ce9ff62..61f516b135b4 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
 
                 Linux Ethernet Bonding Driver HOWTO
 
-                Latest update: 12 November 2007
+                Latest update: 23 September 2009
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -614,6 +614,46 @@ primary
 
         The primary option is only valid for active-backup mode.
 
+primary_reselect
+
+        Specifies the reselection policy for the primary slave.  This
+        affects how the primary slave is chosen to become the active slave
+        when failure of the active slave or recovery of the primary slave
+        occurs.  This option is designed to prevent flip-flopping between
+        the primary slave and other slaves.  Possible values are:
+
+        always or 0 (default)
+
+                The primary slave becomes the active slave whenever it
+                comes back up.
+
+        better or 1
+
+                The primary slave becomes the active slave when it comes
+                back up, if the speed and duplex of the primary slave is
+                better than the speed and duplex of the current active
+                slave.
+
+        failure or 2
+
+                The primary slave becomes the active slave only if the
+                current active slave fails and the primary slave is up.
+
+        The primary_reselect setting is ignored in two cases:
+
+                If no slaves are active, the first slave to recover is
+                made the active slave.
+
+                When initially enslaved, the primary slave is always made
+                the active slave.
+
+        Changing the primary_reselect policy via sysfs will cause an
+        immediate selection of the best active slave according to the new
+        policy.  This may or may not result in a change of the active
+        slave, depending upon the circumstances.
+
+        This option was added for bonding version 3.6.0.
+
 updelay
 
         Specifies the time, in milliseconds, to wait before enabling a
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index fbe427a6580c..006b39dec87d 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -164,6 +164,14 @@ tcp_congestion_control - STRING
         additional choices may be available based on kernel configuration.
         Default is set as part of kernel configuration.
 
+tcp_cookie_size - INTEGER
+        Default size of TCP Cookie Transactions (TCPCT) option, that may be
+        overridden on a per socket basis by the TCPCT socket option.
+        Values greater than the maximum (16) are interpreted as the maximum.
+        Values greater than zero and less than the minimum (8) are interpreted
+        as the minimum.  Odd values are interpreted as the next even value.
+        Default: 0 (off).
+
 tcp_dsack - BOOLEAN
         Allows TCP to send "duplicate" SACKs.
 
@@ -723,6 +731,12 @@ accept_source_route - BOOLEAN
         default TRUE (router)
                 FALSE (host)
 
+accept_local - BOOLEAN
+        Accept packets with local source addresses. In combination with
+        suitable routing, this can be used to direct packets between two
+        local interfaces over the wire and have them accepted properly.
+        default FALSE
+
 rp_filter - INTEGER
         0 - No source validation.
         1 - Strict mode as defined in RFC3704 Strict Reverse Path
@@ -738,8 +752,8 @@ rp_filter - INTEGER
         to prevent IP spoofing from DDos attacks. If using asymmetric routing
         or other complicated routing, then loose mode is recommended.
 
-        conf/all/rp_filter must also be set to non-zero to do source validation
-        on the interface
+        The max value from conf/{all,interface}/rp_filter is used
+        when doing source validation on the {interface}.
 
         Default value is 0. Note that some distributions enable it
         in startup scripts.
@@ -1086,6 +1100,24 @@ accept_dad - INTEGER
         2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
            link-local address has been found.
 
+force_tllao - BOOLEAN
+        Enable sending the target link-layer address option even when
+        responding to a unicast neighbor solicitation.
+        Default: FALSE
+
+        Quoting from RFC 2461, section 4.4, Target link-layer address:
+
+        "The option MUST be included for multicast solicitations in order to
+        avoid infinite Neighbor Solicitation "recursion" when the peer node
+        does not have a cache entry to return a Neighbor Advertisements
+        message.  When responding to unicast solicitations, the option can be
+        omitted since the sender of the solicitation has the correct link-
+        layer address; otherwise it would not have be able to send the unicast
+        solicitation in the first place. However, including the link-layer
+        address in this case adds little overhead and eliminates a potential
+        race condition where the sender deletes the cached link-layer address
+        prior to receiving a response to a previous solicitation."
+
 icmp/*:
 ratelimit - INTEGER
         Limit the maximal rates for sending ICMPv6 packets.
diff --git a/Documentation/nommu-mmap.txt b/Documentation/nommu-mmap.txt
index b565e8279d13..8e1ddec2c78a 100644
--- a/Documentation/nommu-mmap.txt
+++ b/Documentation/nommu-mmap.txt
@@ -119,6 +119,32 @@ FURTHER NOTES ON NO-MMU MMAP
      granule but will only discard the excess if appropriately configured as
      this has an effect on fragmentation.
 
+ (*) The memory allocated by a request for an anonymous mapping will normally
+     be cleared by the kernel before being returned in accordance with the
+     Linux man pages (ver 2.22 or later).
+
+     In the MMU case this can be achieved with reasonable performance as
+     regions are backed by virtual pages, with the contents only being mapped
+     to cleared physical pages when a write happens on that specific page
+     (prior to which, the pages are effectively mapped to the global zero page
+     from which reads can take place).  This spreads out the time it takes to
+     initialize the contents of a page - depending on the write-usage of the
+     mapping.
+
+     In the no-MMU case, however, anonymous mappings are backed by physical
+     pages, and the entire map is cleared at allocation time.  This can cause
+     significant delays during a userspace malloc() as the C library does an
+     anonymous mapping and the kernel then does a memset for the entire map.
+
+     However, for memory that isn't required to be precleared - such as that
+     returned by malloc() - mmap() can take a MAP_UNINITIALIZED flag to
+     indicate to the kernel that it shouldn't bother clearing the memory before
+     returning it.  Note that CONFIG_MMAP_ALLOW_UNINITIALIZED must be enabled
+     to permit this, otherwise the flag will be ignored.
+
+     uClibc uses this to speed up malloc(), and the ELF-FDPIC binfmt uses this
+     to allocate the brk and stack region.
+
  (*) A list of all the private copy and anonymous mappings on the system is
      visible through /proc/maps in no-MMU mode.
 
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index b152e81da592..c10c022b911c 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -257,6 +257,8 @@ characters, each representing a particular tainted value.
 
  10: 'W' if a warning has previously been issued by the kernel.
 
+ 11: 'C' if a staging driver has been loaded.
+
 The primary reason for the 'Tainted: ' string is to tell kernel
 debuggers if this is a clean kernel or if anything unusual has
 occurred.  Tainting is permanent: even if an offending module is
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 059934363caf..446f43b309df 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,5 +1,17 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
+   Instead of the cs_error() callback or the CS_CHECK() macro, please use
+   Linux-style checking of return values, and -- if necessary -- debug
+   messages using "dev_dbg()" or "pr_debug()".
+
+* New CIS tuple access (as of 2.6.33)
+   Instead of pcmcia_get_{first,next}_tuple(), pcmcia_get_tuple_data() and
+   pcmcia_parse_tuple(), a driver shall use "pcmcia_get_tuple()" if it is
+   only interested in one (raw) tuple, or "pcmcia_loop_tuple()" if it is
+   interested in all tuples of one type. To decode the MAC from CISTPL_FUNCE,
+   a new helper "pcmcia_get_mac_from_cis()" was added.
+
 * New configuration loop helper (as of 2.6.28)
    By calling pcmcia_loop_config(), a driver can iterate over all available
    configuration options. During a driver's probe() phase, one doesn't need
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 5f83fd24ea84..cdebb5145c25 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -104,7 +104,7 @@ to set the limit to 500mA when supplying power.
 
 Consumers can control their supply current limit by calling :-
 
-int regulator_set_current_limit(regulator, min_uV, max_uV);
+int regulator_set_current_limit(regulator, min_uA, max_uA);
 
 Where min_uA and max_uA are the minimum and maximum acceptable current limit in
 microamps.
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index f49a33b704d2..4a3109b28847 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -38,7 +38,7 @@ struct dev_pm_ops {
         ...
         int (*runtime_suspend)(struct device *dev);
         int (*runtime_resume)(struct device *dev);
-        void (*runtime_idle)(struct device *dev);
+        int (*runtime_idle)(struct device *dev);
         ...
 };
 
@@ -71,9 +71,9 @@ what to do to handle the device).
     purpose).
 
 In particular, if the driver requires remote wakeup capability for proper
-functioning and device_may_wakeup() returns 'false' for the device, then
+functioning and device_run_wake() returns 'false' for the device, then
 ->runtime_suspend() should return -EBUSY.  On the other hand, if
-device_may_wakeup() returns 'true' for the device and the device is put
+device_run_wake() returns 'true' for the device and the device is put
 into a low power state during the execution of its bus type's
 ->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism
 allowing the device to request a change of its power state, such as PCI PME)
@@ -114,7 +114,8 @@ The action performed by a bus type's ->runtime_idle() callback is totally
 dependent on the bus type in question, but the expected and recommended action
 is to check if the device can be suspended (i.e. if all of the conditions
 necessary for suspending the device are satisfied) and to queue up a suspend
-request for the device in that case.
+request for the device in that case.  The value returned by this callback is
+ignored by the PM core.
 
 The helper functions provided by the PM core, described in Section 4, guarantee
 that the following constraints are met with respect to the bus type's run-time
@@ -214,6 +215,9 @@ defined in include/linux/pm.h:
       being executed for that device and it is not practical to wait for the
       suspend to complete; means "start a resume as soon as you've suspended"
 
+  unsigned int run_wake;
+    - set if the device is capable of generating run-time wake-up events
+
   enum rpm_status runtime_status;
     - the run-time PM status of the device; this field's initial value is
       RPM_SUSPENDED, which means that each device is initially regarded by the
diff --git a/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt
new file mode 100644
index 000000000000..515ebcf1b97d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt
@@ -0,0 +1,93 @@
+PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
+
+Device nodes needed for operation of the ppc440spe-adma driver
+are specified hereby. These are I2O/DMA, DMA and XOR nodes
+for DMA engines and Memory Queue Module node. The latter is used
+by ADMA driver for configuration of RAID-6 H/W capabilities of
+the PPC440SPe. In addition to the nodes and properties described
+below, the ranges property of PLB node must specify ranges for
+DMA devices.
+
+ i) The I2O node
+
+ Required properties:
+
+ - compatible           : "ibm,i2o-440spe";
+ - reg                  : <registers mapping>
+ - dcr-reg              : <DCR registers range>
+
+ Example:
+
+        I2O: i2o@400100000 {
+                compatible = "ibm,i2o-440spe";
+                reg = <0x00000004 0x00100000 0x100>;
+                dcr-reg = <0x060 0x020>;
+        };
+
+
+ ii) The DMA node
+
+ Required properties:
+
+ - compatible           : "ibm,dma-440spe";
+ - cell-index           : 1 cell, hardware index of the DMA engine
+                          (typically 0x0 and 0x1 for DMA0 and DMA1)
+ - reg                  : <registers mapping>
+ - dcr-reg              : <DCR registers range>
+ - interrupts           : <interrupt mapping for DMA0/1 interrupts sources:
+                           2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
+                           and DMA Error IRQ (on UIC1). The latter is common
+                           for both DMA engines>.
+ - interrupt-parent     : needed for interrupt mapping
+
+ Example:
+
+        DMA0: dma0@400100100 {
+                compatible = "ibm,dma-440spe";
+                cell-index = <0>;
+                reg = <0x00000004 0x00100100 0x100>;
+                dcr-reg = <0x060 0x020>;
+                interrupt-parent = <&DMA0>;
+                interrupts = <0 1>;
+                #interrupt-cells = <1>;
+                #address-cells = <0>;
+                #size-cells = <0>;
+                interrupt-map = <
+                        0 &UIC0 0x14 4
+                        1 &UIC1 0x16 4>;
+        };
+
+
+ iii) XOR Accelerator node
+
+ Required properties:
+
+ - compatible           : "amcc,xor-accelerator";
+ - reg                  : <registers mapping>
+ - interrupts           : <interrupt mapping for XOR interrupt source>
+ - interrupt-parent     : for interrupt mapping
+
+ Example:
+
+        xor-accel@400200000 {
+                compatible = "amcc,xor-accelerator";
+                reg = <0x00000004 0x00200000 0x400>;
+                interrupt-parent = <&UIC1>;
+                interrupts = <0x1f 4>;
+        };
+
+
+ iv) Memory Queue Module node
+
+ Required properties:
+
+ - compatible           : "ibm,mq-440spe";
+ - dcr-reg              : <DCR registers range>
+
+ Example:
+
+        MQ0: mq {
+                compatible = "ibm,mq-440spe";
+                dcr-reg = <0x040 0x020>;
+        };
+
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index e8b5bc24d0ac..39e941515a36 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -20,12 +20,16 @@ Required properities:
 - compatible : should be "fsl,fpga-pixis".
 - reg : should contain the address and the length of the FPPGA register
   set.
+- interrupt-parent: should specify phandle for the interrupt controller.
+- interrupts : should specify event (wakeup) IRQ.
 
 Example (MPC8610HPCD):
 
         board-control@e8000000 {
                 compatible = "fsl,fpga-pixis";
                 reg = <0xe8000000 32>;
+                interrupt-parent = <&mpic>;
+                interrupts = <8 8>;
         };
 
 * Freescale BCSR GPIO banks
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index 8447fd7090d0..5c6602dbfdc2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -103,7 +103,22 @@ fsl,mpc5200-gpt nodes
 ---------------------
 On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
 design supports the internal wdt, then the device node for GPT0 should
-include the empty property 'fsl,has-wdt'.
+include the empty property 'fsl,has-wdt'.  Note that this does not activate
+the watchdog.  The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used.  The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+        fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds.  If n=0, the
+configuration of the watchdog is not touched.  This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+  the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
 
 An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
 add the following properties to the gpt node:
@@ -178,3 +193,13 @@ External interrupts:
         external irq3:  interrupts = <1 3 n>;
 'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
 
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properites, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source- a string describing the clock source. Valid values
+                          are:  "ip" for ip bus clock
+                                "ref" for reference clock (XTAL)
+                          "ref" is default in case this property is not
+                          present.
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
index 80339fe4300b..ea68046bb9cb 100644
--- a/Documentation/powerpc/dts-bindings/xilinx.txt
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -292,4 +292,15 @@
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
+      vii) Xilinx USB Host controller
+
+      The Xilinx USB host controller is EHCI compatible but with a different
+      base address for the EHCI registers, and it is always a big-endian
+      USB Host controller. The hardware can be configured as high speed only,
+      or high speed/full speed hybrid.
+
+      Required properties:
+      - xlnx,support-usb-fs: A value 0 means the core is built as high speed
+                             only. A value 1 means the core also supports
+                             full speed devices.
 
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index c851ef497795..17ffa0607712 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,65 @@
+1 Release Date    : Tues.  July 28, 2009 10:12:45 PST 2009 -
+                        (emaild-id:megaraidlinux@lsi.com)
+                        Bo Yang
+
+2 Current Version : 00.00.04.12
+3 Older Version   : 00.00.04.10
+
+1.      Change the AEN sys PD update from scsi_scan to
+        scsi_add_device and scsi_remove_device.
+2.      Takeoff the debug print-out in aen_polling routine.
+
+1 Release Date    : Thur.  July 02, 2009 10:12:45 PST 2009 -
+                        (emaild-id:megaraidlinux@lsi.com)
+                        Bo Yang
+
+2 Current Version : 00.00.04.10
+3 Older Version   : 00.00.04.08
+
+1.      Add the 3 mins timeout during the controller initialize.
+2.      Add the fix for 64bit sense date errors.
+
+1 Release Date    : Tues. May 05, 2009 10:12:45 PST 2009 -
+                        (emaild-id:megaraidlinux@lsi.com)
+                        Bo Yang
+
+2 Current Version : 00.00.04.08
+3 Older Version   : 00.00.04.06
+
+1.      Add the fix of pending in FW after deleted the logic drives.
+2.      Add the fix of deallocating memory after get pdlist.
+
+1 Release Date    : Tues. March 26, 2009 10:12:45 PST 2009 -
+                        (emaild-id:megaraidlinux@lsi.com)
+                        Bo Yang
+
+2 Current Version : 00.00.04.06
+3 Older Version   : 00.00.04.04
+
+1.      Add the fix of the driver cmd empty fix of the driver cmd empty.
+2.      Add the fix of the driver MSM AEN CMD cause the system slow.
+
+1 Release Date    : Tues. March 03, 2009 10:12:45 PST 2009 -
+                        (emaild-id:megaraidlinux@lsi.com)
+                        Bo Yang
+
+2 Current Version : 00.00.04.04
+3 Older Version   : 00.00.04.01
+
+1.      Add the Tape drive fix to the driver: If the command is for
+        the tape device, set the pthru timeout to the os layer timeout value.
+
+2.      Add Poll_wait mechanism to Gen-2 Linux driv.
+                In the aen handler, driver needs to wakeup poll handler similar to
+                the way it raises SIGIO.
+
+3.      Add new controller new SAS2 support to the driver.
+
+4.      Report the unconfigured PD (system PD) to OS.
+
+5.      Add the IEEE SGL support to the driver
+
+6.      Reasign the Application cmds to SAS2 controller
 
 1 Release Date    : Thur.July. 24 11:41:51 PST 2008 -
                        (emaild-id:megaraidlinux@lsi.com)
@@ -185,7 +247,7 @@ ii.	FW enables WCE bit in Mode Sense cmd for drives that are configured
         Disks are exposed with WCE=1. User is advised to enable Write Back
         mode only when the controller has battery backup. At this time
         Synhronize cache is not supported by the FW. Driver will short-cycle
-        the cmd and return sucess without sending down to FW.
+        the cmd and return success without sending down to FW.
 
 1 Release Date    : Sun Jan. 14 11:21:32 PDT 2007 -
                  Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
diff --git a/Documentation/serial/hayes-esp.txt b/Documentation/serial/hayes-esp.txt
deleted file mode 100644
index 09b5d5856758..000000000000
--- a/Documentation/serial/hayes-esp.txt
+++ /dev/null
@@ -1,154 +0,0 @@
-HAYES ESP DRIVER VERSION 2.1
-
-A big thanks to the people at Hayes, especially Alan Adamson.  Their support
-has enabled me to provide enhancements to the driver.
-
-Please report your experiences with this driver to me (arobinso@nyx.net).  I
-am looking for both positive and negative feedback.
-
-*** IMPORTANT CHANGES FOR 2.1 ***
-Support for PIO mode.  Five situations will cause PIO mode to be used:
-1) A multiport card is detected.  PIO mode will always be used.  (8 port cards
-do not support DMA).
-2) The DMA channel is set to an invalid value (anything other than 1 or 3).
-3) The DMA buffer/channel could not be allocated.  The port will revert to PIO
-mode until it is reopened.
-4) Less than a specified number of bytes need to be transferred to/from the
-FIFOs.  PIO mode will be used for that transfer only.
-5) A port needs to do a DMA transfer and another port is already using the
-DMA channel.  PIO mode will be used for that transfer only.
-
-Since the Hayes ESP seems to conflict with other cards (notably sound cards)
-when using DMA, DMA is turned off by default.  To use DMA, it must be turned
-on explicitly, either with the "dma=" option described below or with
-setserial.  A multiport card can be forced into DMA mode by using setserial;
-however, most multiport cards don't support DMA.
-
-The latest version of setserial allows the enhanced configuration of the ESP
-card to be viewed and modified.
-***
-
-This package contains the files needed to compile a module to support the Hayes
-ESP card.  The drivers are basically a modified version of the serial drivers.
-
-Features:
-
-- Uses the enhanced mode of the ESP card, allowing a wider range of
-  interrupts and features than compatibility mode
-- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs,
-  reducing CPU load
-- Supports primary and secondary ports
-
-
-If the driver is compiled as a module, the IRQs to use can be specified by
-using the irq= option.  The format is:
-
-irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380]
-
-The address in brackets is the base address of the card.  The IRQ of
-nonexistent cards can be set to 0.  If an IRQ of a card that does exist is set
-to 0, the driver will attempt to guess at the correct IRQ.  For example, to set
-the IRQ of the card at address 0x300 to 12, the insmod command would be:
-
-insmod esp irq=0,0,0,0,0,0,12,0
-
-The custom divisor can be set by using the divisor= option.  The format is the
-same as for the irq= option.  Each divisor value is a series of hex digits,
-with each digit representing the divisor to use for a corresponding port.  The
-divisor value is constructed RIGHT TO LEFT.  Specifying a nonzero divisor value
-will automatically set the spd_cust flag.  To calculate the divisor to use for
-a certain baud rate, divide the port's base baud (generally 921600) by the
-desired rate.  For example, to set the divisor of the primary port at 0x300 to
-4 and the divisor of the secondary port at 0x308 to 8, the insmod command would
-be:
-
-insmod esp divisor=0,0,0,0,0,0,0x84,0
-
-The dma= option can be used to set the DMA channel.  The channel can be either
-1 or 3.  Specifying any other value will force the driver to use PIO mode.
-For example, to set the DMA channel to 3, the insmod command would be:
-
-insmod esp dma=3
-
-The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger
-levels.  They specify when the ESP card should send an interrupt.  Larger
-values will decrease the number of interrupts; however, a value too high may
-result in data loss.  Valid values are 1 through 1023, with 768 being the
-default.  For example, to set the receive trigger level to 512 bytes and the
-transmit trigger level to 700 bytes, the insmod command would be:
-
-insmod esp rx_trigger=512 tx_trigger=700
-
-The flow_off= and flow_on= options can be used to set the hardware flow off/
-flow on levels.  The flow on level must be lower than the flow off level, and
-the flow off level should be higher than rx_trigger.  Valid values are 1
-through 1023, with 1016 being the default flow off level and 944 being the
-default flow on level.  For example, to set the flow off level to 1000 bytes
-and the flow on level to 935 bytes, the insmod command would be:
-
-insmod esp flow_off=1000 flow_on=935
-
-The rx_timeout= option can be used to set the receive timeout value.  This
-value indicates how long after receiving the last character that the ESP card
-should wait before signalling an interrupt.  Valid values are 0 though 255,
-with 128 being the default.  A value too high will increase latency, and a
-value too low will cause unnecessary interrupts.  For example, to set the
-receive timeout to 255, the insmod command would be:
-
-insmod esp rx_timeout=255
-
-The pio_threshold= option sets the threshold (in number of characters) for
-using PIO mode instead of DMA mode.  For example, if this value is 32,
-transfers of 32 bytes or less will always use PIO mode.
-
-insmod esp pio_threshold=32
-
-Multiple options can be listed on the insmod command line by separating each
-option with a space.  For example:
-
-insmod esp dma=3 trigger=512
-
-The esp module can be automatically loaded when needed.  To cause this to
-happen, add the following lines to /etc/modprobe.conf (replacing the last line
-with options for your configuration):
-
-alias char-major-57 esp
-alias char-major-58 esp
-options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0
-
-You may also need to run 'depmod -a'.
-
-Devices must be created manually.  To create the devices, note the output from
-the module after it is inserted.  The output will appear in the location where
-kernel messages usually appear (usually /var/adm/messages).  Create two devices
-for each 'tty' mentioned, one with major of 57 and the other with major of 58.
-The minor number should be the same as the tty number reported.  The commands
-would be (replace ? with the tty number):
-
-mknod /dev/ttyP? c 57 ?
-mknod /dev/cup? c 58 ?
-
-For example, if the following line appears:
-
-Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port
-
-...two devices should be created:
-
-mknod /dev/ttyP8 c 57 8
-mknod /dev/cup8 c 58 8
-
-You may need to set the permissions on the devices:
-
-chmod 666 /dev/ttyP*
-chmod 666 /dev/cup*
-
-The ESP module and the serial module should not conflict (they can be used at
-the same time).  After the ESP module has been loaded the ports on the ESP card
-will no longer be accessible by the serial driver.
-
-If I/O errors are experienced when accessing the port, check for IRQ and DMA
-conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and
-DMAs currently in use).
-
-Enjoy!
-Andrew J. Robinson <arobinso@nyx.net>
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 8e65c4498c52..5e5349a4fcd2 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -42,7 +42,8 @@ TTY side interfaces:
 open()          -       Called when the line discipline is attached to
                         the terminal. No other call into the line
                         discipline for this tty will occur until it
-                        completes successfully. Can sleep.
+                        completes successfully. Returning an error will
+                        prevent the ldisc from being attached. Can sleep.
 
 close()         -       This is called on a terminal when the line
                         discipline is being unplugged. At the point of
@@ -52,7 +53,7 @@ close()		-	This is called on a terminal when the line
 hangup()        -       Called when the tty line is hung up.
                         The line discipline should cease I/O to the tty.
                         No further calls into the ldisc code will occur.
-                        Can sleep.
+                        The return value is ignored. Can sleep.
 
 write()         -       A process is writing data through the line
                         discipline.  Multiple write calls are serialized
@@ -83,6 +84,10 @@ ioctl()		-	Called when an ioctl is handed to the tty layer
                         that might be for the ldisc. Multiple ioctl calls
                         may occur in parallel. May sleep. 
 
+compat_ioctl()  -       Called when a 32 bit ioctl is handed to the tty layer
+                        that might be for the ldisc. Multiple ioctl calls
+                        may occur in parallel. May sleep.
+
 Driver Side Interfaces:
 
 receive_buf()   -       Hand buffers of bytes from the driver to the ldisc
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
index ebc50f808ea4..9dbf4470c7e1 100644
--- a/Documentation/slow-work.txt
+++ b/Documentation/slow-work.txt
@@ -41,6 +41,13 @@ expand files, provided the time taken to do so isn't too long.
 Operations of both types may sleep during execution, thus tying up the thread
 loaned to it.
 
+A further class of work item is available, based on the slow work item class:
+
+ (*) Delayed slow work items.
+
+These are slow work items that have a timer to defer queueing of the item for
+a while.
+
 
 THREAD-TO-CLASS ALLOCATION
 --------------------------
@@ -64,9 +71,11 @@ USING SLOW WORK ITEMS
 Firstly, a module or subsystem wanting to make use of slow work items must
 register its interest:
 
-         int ret = slow_work_register_user();
+         int ret = slow_work_register_user(struct module *module);
 
-This will return 0 if successful, or a -ve error upon failure.
+This will return 0 if successful, or a -ve error upon failure.  The module
+pointer should be the module interested in using this facility (almost
+certainly THIS_MODULE).
 
 
 Slow work items may then be set up by:
@@ -93,6 +102,10 @@ Slow work items may then be set up by:
 
      or:
 
+        delayed_slow_work_init(&myitem, &myitem_ops);
+
+     or:
+
         vslow_work_init(&myitem, &myitem_ops);
 
      depending on its class.
@@ -102,15 +115,92 @@ A suitably set up work item can then be enqueued for processing:
         int ret = slow_work_enqueue(&myitem);
 
 This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise.
+on the item, 0 otherwise, or (for delayed work):
+
+        int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
 
 
 The items are reference counted, so there ought to be no need for a flush
-operation.  When all a module's slow work items have been processed, and the
+operation.  But as the reference counting is optional, means to cancel
+existing work items are also included:
+
+        cancel_slow_work(&myitem);
+        cancel_delayed_slow_work(&myitem);
+
+can be used to cancel pending work.  The above cancel function waits for
+existing work to have been executed (or prevent execution of them, depending
+on timing).
+
+
+When all a module's slow work items have been processed, and the
 module has no further interest in the facility, it should unregister its
 interest:
 
-        slow_work_unregister_user();
+        slow_work_unregister_user(struct module *module);
+
+The module pointer is used to wait for all outstanding work items for that
+module before completing the unregistration.  This prevents the put_ref() code
+from being taken away before it completes.  module should almost certainly be
+THIS_MODULE.
+
+
+================
+HELPER FUNCTIONS
+================
+
+The slow-work facility provides a function by which it can be determined
+whether or not an item is queued for later execution:
+
+        bool queued = slow_work_is_queued(struct slow_work *work);
+
+If it returns false, then the item is not on the queue (it may be executing
+with a requeue pending).  This can be used to work out whether an item on which
+another depends is on the queue, thus allowing a dependent item to be queued
+after it.
+
+If the above shows an item on which another depends not to be queued, then the
+owner of the dependent item might need to wait.  However, to avoid locking up
+the threads unnecessarily be sleeping in them, it can make sense under some
+circumstances to return the work item to the queue, thus deferring it until
+some other items have had a chance to make use of the yielded thread.
+
+To yield a thread and defer an item, the work function should simply enqueue
+the work item again and return.  However, this doesn't work if there's nothing
+actually on the queue, as the thread just vacated will jump straight back into
+the item's work function, thus busy waiting on a CPU.
+
+Instead, the item should use the thread to wait for the dependency to go away,
+but rather than using schedule() or schedule_timeout() to sleep, it should use
+the following function:
+
+        bool requeue = slow_work_sleep_till_thread_needed(
+                        struct slow_work *work,
+                        signed long *_timeout);
+
+This will add a second wait and then sleep, such that it will be woken up if
+either something appears on the queue that could usefully make use of the
+thread - and behind which this item can be queued, or if the event the caller
+set up to wait for happens.  True will be returned if something else appeared
+on the queue and this work function should perhaps return, of false if
+something else woke it up.  The timeout is as for schedule_timeout().
+
+For example:
+
+        wq = bit_waitqueue(&my_flags, MY_BIT);
+        init_wait(&wait);
+        requeue = false;
+        do {
+                prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+                if (!test_bit(MY_BIT, &my_flags))
+                        break;
+                requeue = slow_work_sleep_till_thread_needed(&my_work,
+                                                             &timeout);
+        } while (timeout > 0 && !requeue);
+        finish_wait(wq, &wait);
+        if (!test_bit(MY_BIT, &my_flags)
+                goto do_my_thing;
+        if (requeue)
+                return; // to slow_work
 
 
 ===============
@@ -118,7 +208,8 @@ ITEM OPERATIONS
 ===============
 
 Each work item requires a table of operations of type struct slow_work_ops.
-All members are required:
+Only ->execute() is required; the getting and putting of a reference and the
+describing of an item are all optional.
 
  (*) Get a reference on an item:
 
@@ -148,6 +239,16 @@ All members are required:
      This should perform the work required of the item.  It may sleep, it may
      perform disk I/O and it may wait for locks.
 
+ (*) View an item through /proc:
+
+        void (*desc)(struct slow_work *work, struct seq_file *m);
+
+     If supplied, this should print to 'm' a small string describing the work
+     the item is to do.  This should be no more than about 40 characters, and
+     shouldn't include a newline character.
+
+     See the 'Viewing executing and queued items' section below.
+
 
 ==================
 POOL CONFIGURATION
@@ -172,3 +273,50 @@ The slow-work thread pool has a number of configurables:
      is bounded to between 1 and one fewer than the number of active threads.
      This ensures there is always at least one thread that can process very
      slow work items, and always at least one thread that won't.
+
+
+==================================
+VIEWING EXECUTING AND QUEUED ITEMS
+==================================
+
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
+
+        /sys/kernel/debug/slow_work/runqueue
+
+through which the list of work items being executed and the queues of items to
+be executed may be viewed.  The owner of a work item is given the chance to
+add some information of its own.
+
+The contents look something like the following:
+
+    THR PID   ITEM ADDR        FL MARK  DESC
+    === ===== ================ == ===== ==========
+      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
+      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
+      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
+      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
+      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
+      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
+      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
+      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
+    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
+    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
+    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
+    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
+    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
+    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
+    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
+    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
+    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
+    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
+    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
+    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
+    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
+    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
+
+In the 'THR' column, executing items show the thread they're occupying and
+queued threads indicate which queue they're on.  'PID' shows the process ID of
+a slow-work thread that's executing something.  'FL' shows the work item flags.
+'MARK' indicates how long since an item was queued or began executing.  Lastly,
+the 'DESC' column permits the owner of an item to give some information.
+
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index fd9a2f67edf2..8923597bd2bd 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -798,6 +798,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
                 setup before initializing the codecs.  This option is
                 available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
                 See HD-Audio.txt for details.
+    beep_mode   - Selects the beep registration mode (0=off, 1=on, 2=
+                dynamic registration via mute switch on/off); the default
+                value is set via CONFIG_SND_HDA_INPUT_BEEP_MODE kconfig.
     
     [Single (global) options]
     single_cmd  - Use single immediate commands to communicate with
@@ -1454,6 +1457,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module for internal PC-Speaker.
 
+    nopcm       - Disable PC-Speaker PCM sound. Only beeps remain.
     nforce_wa   - enable NForce chipset workaround. Expect bad sound.
 
     This module supports system beeps, some kind of PCM playback and
@@ -1631,7 +1635,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-sscape
   -----------------
 
-    Module for ENSONIQ SoundScape PnP cards.
+    Module for ENSONIQ SoundScape cards.
 
     port        - Port # (PnP setup)
     wss_port    - WSS Port # (PnP setup)
@@ -1639,10 +1643,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq     - MPU-401 IRQ # (PnP setup)
     dma         - DMA # (PnP setup)
     dma2        - 2nd DMA # (PnP setup, -1 to disable)
+    joystick    - Enable gameport - 0 = disable (default), 1 = enable
+
+    This module supports multiple cards.
 
-    This module supports multiple cards.  ISA PnP must be enabled.
-    You need sscape_ctl tool in alsa-tools package for loading
-    the microcode.
+    The driver requires the firmware loader support on kernel.
 
   Module snd-sun-amd7930 (on sparc only)
   --------------------------------------
diff --git a/Documentation/sound/alsa/ControlNames.txt b/Documentation/sound/alsa/ControlNames.txt
index 5b18298e9495..fea65bb6269e 100644
--- a/Documentation/sound/alsa/ControlNames.txt
+++ b/Documentation/sound/alsa/ControlNames.txt
@@ -18,8 +18,9 @@ SOURCE:
   Master
   Master Mono
   Hardware Master
+  Speaker       (internal speaker)
   Headphone
-  PC Speaker
+  Beep          (beep generator)
   Phone
   Phone Input
   Phone Output
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 4c7f9aee5c4e..e93affff3af8 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -126,6 +126,7 @@ ALC882/883/885/888/889
   mb5           Macbook 5,1
   mbp3          Macbook Pro rev3
   imac24        iMac 24'' with jack detection
+  imac91        iMac 9,1
   w2jc          ASUS W2JC
   3stack-2ch-dig        3-jack with SPDIF I/O (ALC883)
   alc883-6stack-dig     6-jack digital with SPDIF I/O (ALC883)
@@ -391,6 +392,7 @@ STAC92HD83*
   ref           Reference board
   mic-ref       Reference board with power management for ports
   dell-s14      Dell laptop
+  hp            HP laptops with (inverted) mute-LED
   auto          BIOS setup (default)
 
 STAC9872
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 7b8a5f947d1d..6325bec06a72 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -624,11 +624,13 @@ hda-verb.  The program gives you an easy-to-use GUI stuff for showing
 the widget information and adjusting the amp values, as well as the
 proc-compatible output.
 
-The hda-analyzer is a part of alsa.git repository in
-alsa-project.org:
+The hda-analyzer:
 
 - http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer
 
+is a part of alsa.git repository in alsa-project.org:
+
+- git://git.alsa-project.org/alsa.git
 
 Codecgraph
 ~~~~~~~~~~
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index deab51ddc33e..4884cb33845d 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -538,7 +538,7 @@ SPI MESSAGE QUEUE
 The bulk of the driver will be managing the I/O queue fed by transfer().
 
 That queue could be purely conceptual.  For example, a driver used only
-for low-frequency sensor acess might be fine using synchronous PIO.
+for low-frequency sensor access might be fine using synchronous PIO.
 
 But the queue will probably be very real, using message->queue, PIO,
 often DMA (especially if the root filesystem is in SPI flash), and
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt
index 619699dde593..178c831b907d 100644
--- a/Documentation/spinlocks.txt
+++ b/Documentation/spinlocks.txt
@@ -1,73 +1,8 @@
-SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED defeat lockdep state tracking and
-are hence deprecated.
+Lesson 1: Spin locks
 
-Please use DEFINE_SPINLOCK()/DEFINE_RWLOCK() or
-__SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static
-initialization.
-
-Most of the time, you can simply turn:
-
-        static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
-
-into:
-
-        static DEFINE_SPINLOCK(xxx_lock);
-
-Static structure member variables go from:
-
-        struct foo bar {
-                .lock   =       SPIN_LOCK_UNLOCKED;
-        };
-
-to:
-
-        struct foo bar {
-                .lock   =       __SPIN_LOCK_UNLOCKED(bar.lock);
-        };
-
-Declaration of static rw_locks undergo a similar transformation.
-
-Dynamic initialization, when necessary, may be performed as
-demonstrated below.
-
-   spinlock_t xxx_lock;
-   rwlock_t xxx_rw_lock;
-
-   static int __init xxx_init(void)
-   {
-        spin_lock_init(&xxx_lock);
-        rwlock_init(&xxx_rw_lock);
-        ...
-   }
-
-   module_init(xxx_init);
-
-The following discussion is still valid, however, with the dynamic
-initialization of spinlocks or with DEFINE_SPINLOCK, etc., used
-instead of SPIN_LOCK_UNLOCKED.
-
------------------------
-
-On Fri, 2 Jan 1998, Doug Ledford wrote:
-> 
-> I'm working on making the aic7xxx driver more SMP friendly (as well as
-> importing the latest FreeBSD sequencer code to have 7895 support) and wanted
-> to get some info from you.  The goal here is to make the various routines
-> SMP safe as well as UP safe during interrupts and other manipulating
-> routines.  So far, I've added a spin_lock variable to things like my queue
-> structs.  Now, from what I recall, there are some spin lock functions I can
-> use to lock these spin locks from other use as opposed to a (nasty)
-> save_flags(); cli(); stuff; restore_flags(); construct.  Where do I find
-> these routines and go about making use of them?  Do they only lock on a
-> per-processor basis or can they also lock say an interrupt routine from
-> mucking with a queue if the queue routine was manipulating it when the
-> interrupt occurred, or should I still use a cli(); based construct on that
-> one?
-
-See <asm/spinlock.h>. The basic version is:
-
-   spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+The most basic primitive for locking is spinlock.
 
+static DEFINE_SPINLOCK(xxx_lock);
 
         unsigned long flags;
 
@@ -75,13 +10,11 @@ See <asm/spinlock.h>. The basic version is:
         ... critical section here ..
         spin_unlock_irqrestore(&xxx_lock, flags);
 
-and the above is always safe. It will disable interrupts _locally_, but the
+The above is always safe. It will disable interrupts _locally_, but the
 spinlock itself will guarantee the global lock, so it will guarantee that
 there is only one thread-of-control within the region(s) protected by that
-lock. 
-
-Note that it works well even under UP - the above sequence under UP
-essentially is just the same as doing a
+lock. This works well even under UP. The above sequence under UP
+essentially is just the same as doing
 
         unsigned long flags;
 
@@ -91,15 +24,13 @@ essentially is just the same as doing a
 
 so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
 work correctly under both (and spinlocks are actually more efficient on
-architectures that allow doing the "save_flags + cli" in one go because I
-don't export that interface normally).
+architectures that allow doing the "save_flags + cli" in one operation).
+
+   NOTE! Implications of spin_locks for memory are further described in:
 
-NOTE NOTE NOTE! The reason the spinlock is so much faster than a global
-interrupt lock under SMP is exactly because it disables interrupts only on
-the local CPU. The spin-lock is safe only when you _also_ use the lock
-itself to do locking across CPU's, which implies that EVERYTHING that
-touches a shared variable has to agree about the spinlock they want to
-use.
+     Documentation/memory-barriers.txt
+       (5) LOCK operations.
+       (6) UNLOCK operations.
 
 The above is usually pretty simple (you usually need and want only one
 spinlock for most things - using more than one spinlock can make things a
@@ -120,20 +51,24 @@ and another sequence that does
 then they are NOT mutually exclusive, and the critical regions can happen
 at the same time on two different CPU's. That's fine per se, but the
 critical regions had better be critical for different things (ie they
-can't stomp on each other). 
+can't stomp on each other).
 
 The above is a problem mainly if you end up mixing code - for example the
 routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
 their actions, and if a driver uses spinlocks instead then you should
-think about issues like the above..
+think about issues like the above.
 
 This is really the only really hard part about spinlocks: once you start
 using spinlocks they tend to expand to areas you might not have noticed
 before, because you have to make sure the spinlocks correctly protect the
 shared data structures _everywhere_ they are used. The spinlocks are most
-easily added to places that are completely independent of other code (ie
-internal driver data structures that nobody else ever touches, for
-example). 
+easily added to places that are completely independent of other code (for
+example, internal driver data structures that nobody else ever touches).
+
+   NOTE! The spin-lock is safe only when you _also_ use the lock itself
+   to do locking across CPU's, which implies that EVERYTHING that
+   touches a shared variable has to agree about the spinlock they want
+   to use.
 
 ----
 
@@ -141,13 +76,17 @@ Lesson 2: reader-writer spinlocks.
 
 If your data accesses have a very natural pattern where you usually tend
 to mostly read from the shared variables, the reader-writer locks
-(rw_lock) versions of the spinlocks are often nicer. They allow multiple
+(rw_lock) versions of the spinlocks are sometimes useful. They allow multiple
 readers to be in the same critical region at once, but if somebody wants
-to change the variables it has to get an exclusive write lock. The
-routines look the same as above:
+to change the variables it has to get an exclusive write lock.
 
-   rwlock_t xxx_lock = RW_LOCK_UNLOCKED;
+   NOTE! reader-writer locks require more atomic memory operations than
+   simple spinlocks.  Unless the reader critical section is long, you
+   are better off just using spinlocks.
 
+The routines look the same as above:
+
+   rwlock_t xxx_lock = RW_LOCK_UNLOCKED;
 
         unsigned long flags;
 
@@ -159,18 +98,21 @@ routines look the same as above:
         .. read and write exclusive access to the info ...
         write_unlock_irqrestore(&xxx_lock, flags);
 
-The above kind of lock is useful for complex data structures like linked
-lists etc, especially when you know that most of the work is to just
-traverse the list searching for entries without changing the list itself,
-for example. Then you can use the read lock for that kind of list
-traversal, which allows many concurrent readers. Anything that _changes_
-the list will have to get the write lock. 
+The above kind of lock may be useful for complex data structures like
+linked lists, especially searching for entries without changing the list
+itself.  The read lock allows many concurrent readers.  Anything that
+_changes_ the list will have to get the write lock.
+
+   NOTE! RCU is better for list traversal, but requires careful
+   attention to design detail (see Documentation/RCU/listRCU.txt).
 
-Note: you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
+Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
 time need to do any changes (even if you don't do it every time), you have
-to get the write-lock at the very beginning. I could fairly easily add a
-primitive to create a "upgradeable" read-lock, but it hasn't been an issue
-yet. Tell me if you'd want one. 
+to get the write-lock at the very beginning.
+
+   NOTE! We are working hard to remove reader-writer spinlocks in most
+   cases, so please don't add a new one without consensus.  (Instead, see
+   Documentation/RCU/rcu.txt for complete information.)
 
 ----
 
@@ -233,4 +175,46 @@ indeed), while write-locks need to protect themselves against interrupts.
 
                 Linus
 
+----
+
+Reference information:
+
+For dynamic initialization, use spin_lock_init() or rwlock_init() as
+appropriate:
+
+   spinlock_t xxx_lock;
+   rwlock_t xxx_rw_lock;
+
+   static int __init xxx_init(void)
+   {
+        spin_lock_init(&xxx_lock);
+        rwlock_init(&xxx_rw_lock);
+        ...
+   }
+
+   module_init(xxx_init);
+
+For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or
+__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.
+
+SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED are deprecated.  These interfere
+with lockdep state tracking.
+
+Most of the time, you can simply turn:
+        static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+into:
+        static DEFINE_SPINLOCK(xxx_lock);
+
+Static structure member variables go from:
+
+        struct foo bar {
+                .lock   =       SPIN_LOCK_UNLOCKED;
+        };
+
+to:
 
+        struct foo bar {
+                .lock   =       __SPIN_LOCK_UNLOCKED(bar.lock);
+        };
+
+Declaration of static rw_locks undergo a similar transformation.
diff --git a/Documentation/sysctl/ctl_unnumbered.txt b/Documentation/sysctl/ctl_unnumbered.txt
deleted file mode 100644
index 23003a8ea3e7..000000000000
--- a/Documentation/sysctl/ctl_unnumbered.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-
-Except for a few extremely rare exceptions user space applications do not use
-the binary sysctl interface.  Instead everyone uses /proc/sys/...  with
-readable ascii names.
-
-Recently the kernel has started supporting setting the binary sysctl value to
-CTL_UNNUMBERED so we no longer need to assign a binary sysctl path to allow
-sysctls to show up in /proc/sys.
-
-Assigning binary sysctl numbers is an endless source of conflicts in sysctl.h,
-breaking of the user space ABI (because of those conflicts), and maintenance
-problems.  A complete pass through all of the sysctl users revealed multiple
-instances where the sysctl binary interface was broken and had gone undetected
-for years.
-
-So please do not add new binary sysctl numbers.  They are unneeded and
-problematic.
-
-If you really need a new binary sysctl number please first merge your sysctl
-into the kernel and then as a separate patch allocate a binary sysctl number.
-
-(ebiederm@xmission.com, June 2007)
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index a028b92001ed..3894eaa23486 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -19,6 +19,8 @@ Currently, these files might (depending on your configuration)
 show up in /proc/sys/kernel:
 - acpi_video_flags
 - acct
+- bootloader_type            [ X86 only ]
+- bootloader_version         [ X86 only ]
 - callhome                   [ S390 only ]
 - auto_msgmni
 - core_pattern
@@ -93,6 +95,35 @@ valid for 30 seconds.
 
 ==============================================================
 
+bootloader_type:
+
+x86 bootloader identification
+
+This gives the bootloader type number as indicated by the bootloader,
+shifted left by 4, and OR'd with the low four bits of the bootloader
+version.  The reason for this encoding is that this used to match the
+type_of_loader field in the kernel header; the encoding is kept for
+backwards compatibility.  That is, if the full bootloader type number
+is 0x15 and the full version number is 0x234, this file will contain
+the value 340 = 0x154.
+
+See the type_of_loader and ext_loader_type fields in
+Documentation/x86/boot.txt for additional information.
+
+==============================================================
+
+bootloader_version:
+
+x86 bootloader version
+
+The complete bootloader version number.  In the example above, this
+file will contain the value 564 = 0x234.
+
+See the type_of_loader and ext_loader_ver fields in
+Documentation/x86/boot.txt for additional information.
+
+==============================================================
+
 callhome:
 
 Controls the kernel's callhome behavior in case of a kernel panic.
@@ -139,9 +170,9 @@ core_pattern is used to specify a core dumpfile pattern name.
 core_pipe_limit:
 
 This sysctl is only applicable when core_pattern is configured to pipe core
-files to user space helper a (when the first character of core_pattern is a '|',
+files to a user space helper (when the first character of core_pattern is a '|',
 see above).  When collecting cores via a pipe to an application, it is
-occasionally usefull for the collecting application to gather data about the
+occasionally useful for the collecting application to gather data about the
 crashing process from its /proc/pid directory.  In order to do this safely, the
 kernel must wait for the collecting process to exit, so as not to remove the
 crashing processes proc files prematurely.  This in turn creates the possibility
@@ -152,7 +183,7 @@ applications in parallel.  If this value is exceeded, then those crashing
 processes above that value are noted via the kernel log and their cores are
 skipped.  0 is a special value, indicating that unlimited processes may be
 captured in parallel, but that no waiting will take place (i.e. the collecting
-process is not guaranteed access to /proc/<crahing pid>/).  This value defaults
+process is not guaranteed access to /proc/<crashing pid>/).  This value defaults
 to 0.
 
 ==============================================================
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index a6e360d2055c..fc5790d36cd9 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -370,7 +370,7 @@ The default is 1 percent.
 mmap_min_addr
 
 This file indicates the amount of address space  which a user process will
-be restricted from mmaping.  Since kernel null dereference bugs could
+be restricted from mmapping.  Since kernel null dereference bugs could
 accidentally operate based on the information in the first couple of pages
 of memory userspace processes should not be allowed to write to them.  By
 default this value is set to 0 and no protections will be enforced by the
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 70d68ce8640a..a87dc277a5ca 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -1,5 +1,5 @@
 Generic Thermal Sysfs driver How To
-=========================
+===================================
 
 Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
 
@@ -10,20 +10,20 @@ Copyright (c)  2008 Intel Corporation
 
 0. Introduction
 
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
 
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
 
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
 
 [0-*]   denotes any positive number starting from 0
 [1-*]   denotes any positive number starting from 1
@@ -31,77 +31,77 @@ and throttle appropriate devices.
 1. thermal sysfs driver interface functions
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
-                                void *devdata, struct thermal_zone_device_ops *ops)
-
-        This interface function adds a new thermal zone device (sensor) to
-        /sys/class/thermal folder as thermal_zone[0-*].
-        It tries to bind all the thermal cooling devices registered at the same time.
-
-        name: the thermal zone name.
-        trips: the total number of trip points this thermal zone supports.
-        devdata: device private data
-        ops: thermal zone device call-backs.
-                .bind: bind the thermal zone device with a thermal cooling device.
-                .unbind: unbind the thermal zone device with a thermal cooling device.
-                .get_temp: get the current temperature of the thermal zone.
-                .get_mode: get the current mode (user/kernel) of the thermal zone.
-                           "kernel" means thermal management is done in kernel.
-                           "user" will prevent kernel thermal driver actions upon trip points
-                           so that user applications can take charge of thermal management.
-                .set_mode: set the mode (user/kernel) of the thermal zone.
-                .get_trip_type: get the type of certain trip point.
-                .get_trip_temp: get the temperature above which the certain trip point
-                                will be fired.
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+                int trips, void *devdata, struct thermal_zone_device_ops *ops)
+
+    This interface function adds a new thermal zone device (sensor) to
+    /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+    thermal cooling devices registered at the same time.
+
+    name: the thermal zone name.
+    trips: the total number of trip points this thermal zone supports.
+    devdata: device private data
+    ops: thermal zone device call-backs.
+        .bind: bind the thermal zone device with a thermal cooling device.
+        .unbind: unbind the thermal zone device with a thermal cooling device.
+        .get_temp: get the current temperature of the thermal zone.
+        .get_mode: get the current mode (user/kernel) of the thermal zone.
+            - "kernel" means thermal management is done in kernel.
+            - "user" will prevent kernel thermal driver actions upon trip points
+              so that user applications can take charge of thermal management.
+        .set_mode: set the mode (user/kernel) of the thermal zone.
+        .get_trip_type: get the type of certain trip point.
+        .get_trip_temp: get the temperature above which the certain trip point
+                        will be fired.
 
 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
-        This interface function removes the thermal zone device.
-        It deletes the corresponding entry form /sys/class/thermal folder and unbind all
-        the thermal cooling devices it uses.
+    This interface function removes the thermal zone device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind all the thermal cooling devices it uses.
 
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-                                        void *devdata, struct thermal_cooling_device_ops *)
-
-        This interface function adds a new thermal cooling device (fan/processor/...) to
-        /sys/class/thermal/ folder as cooling_device[0-*].
-        It tries to bind itself to all the thermal zone devices register at the same time.
-        name: the cooling device name.
-        devdata: device private data.
-        ops: thermal cooling devices call-backs.
-                .get_max_state: get the Maximum throttle state of the cooling device.
-                .get_cur_state: get the Current throttle state of the cooling device.
-                .set_cur_state: set the Current throttle state of the cooling device.
+                void *devdata, struct thermal_cooling_device_ops *)
+
+    This interface function adds a new thermal cooling device (fan/processor/...)
+    to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+    to all the thermal zone devices register at the same time.
+    name: the cooling device name.
+    devdata: device private data.
+    ops: thermal cooling devices call-backs.
+        .get_max_state: get the Maximum throttle state of the cooling device.
+        .get_cur_state: get the Current throttle state of the cooling device.
+        .set_cur_state: set the Current throttle state of the cooling device.
 
 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
-        This interface function remove the thermal cooling device.
-        It deletes the corresponding entry form /sys/class/thermal folder and unbind
-        itself from all the thermal zone devices using it.
+    This interface function remove the thermal cooling device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind itself from all the thermal zone devices using it.
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-                        int trip, struct thermal_cooling_device *cdev);
+                int trip, struct thermal_cooling_device *cdev);
 
-        This interface function bind a thermal cooling device to the certain trip point
-        of a thermal zone device.
-        This function is usually called in the thermal zone device .bind callback.
-        tz: the thermal zone device
-        cdev: thermal cooling device
-        trip: indicates which trip point the cooling devices is associated with
-                 in this thermal zone.
+    This interface function bind a thermal cooling device to the certain trip
+    point of a thermal zone device.
+    This function is usually called in the thermal zone device .bind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+          in this thermal zone.
 
 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
-                                int trip, struct thermal_cooling_device *cdev);
+                int trip, struct thermal_cooling_device *cdev);
 
-        This interface function unbind a thermal cooling device from the certain trip point
-        of a thermal zone device.
-        This function is usually called in the thermal zone device .unbind callback.
-        tz: the thermal zone device
-        cdev: thermal cooling device
-        trip: indicates which trip point the cooling devices is associated with
-                in this thermal zone.
+    This interface function unbind a thermal cooling device from the certain
+    trip point of a thermal zone device. This function is usually called in
+    the thermal zone device .unbind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+          in this thermal zone.
 
 2. sysfs attributes structure
 
@@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module.
 
 Thermal zone device sys I/F, created once it's registered:
 /sys/class/thermal/thermal_zone[0-*]:
-        |-----type:                     Type of the thermal zone
-        |-----temp:                     Current temperature
-        |-----mode:                     Working mode of the thermal zone
-        |-----trip_point_[0-*]_temp:    Trip point temperature
-        |-----trip_point_[0-*]_type:    Trip point type
+    |---type:                   Type of the thermal zone
+    |---temp:                   Current temperature
+    |---mode:                   Working mode of the thermal zone
+    |---trip_point_[0-*]_temp:  Trip point temperature
+    |---trip_point_[0-*]_type:  Trip point type
 
 Thermal cooling device sys I/F, created once it's registered:
 /sys/class/thermal/cooling_device[0-*]:
-        |-----type :                    Type of the cooling device(processor/fan/...)
-        |-----max_state:                Maximum cooling state of the cooling device
-        |-----cur_state:                Current cooling state of the cooling device
+    |---type:                   Type of the cooling device(processor/fan/...)
+    |---max_state:              Maximum cooling state of the cooling device
+    |---cur_state:              Current cooling state of the cooling device
 
 
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
 
-/sys/class/thermal/thermal_zone[0-*]
-        |-----cdev[0-*]:                The [0-*]th cooling device in the current thermal zone
-        |-----cdev[0-*]_trip_point:     Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+    |---cdev[0-*]:              [0-*]th cooling device in current thermal zone
+    |---cdev[0-*]_trip_point:   Trip point that cdev[0-*] is associated with
 
 Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
 /sys/class/hwmon/hwmon[0-*]:
-        |-----name:                     The type of the thermal zone devices.
-        |-----temp[1-*]_input:          The current temperature of thermal zone [1-*].
-        |-----temp[1-*]_critical:       The critical trip point of thermal zone [1-*].
+    |---name:                   The type of the thermal zone devices
+    |---temp[1-*]_input:        The current temperature of thermal zone [1-*]
+    |---temp[1-*]_critical:     The critical trip point of thermal zone [1-*]
+
 Please read Documentation/hwmon/sysfs-interface for additional information.
 
 ***************************
 * Thermal zone attributes *
 ***************************
 
-type                            Strings which represent the thermal zone type.
-                                This is given by thermal zone driver as part of registration.
-                                Eg: "acpitz" indicates it's an ACPI thermal device.
-                                In order to keep it consistent with hwmon sys attribute,
-                                this should be a short, lowercase string,
-                                not containing spaces nor dashes.
-                                RO
-                                Required
-
-temp                            Current temperature as reported by thermal zone (sensor)
-                                Unit: millidegree Celsius
-                                RO
-                                Required
-
-mode                            One of the predefined values in [kernel, user]
-                                This file gives information about the algorithm
-                                that is currently managing the thermal zone.
-                                It can be either default kernel based algorithm
-                                or user space application.
-                                RW
-                                Optional
-                                kernel  = Thermal management in kernel thermal zone driver.
-                                user    = Preventing kernel thermal zone driver actions upon
-                                          trip points so that user application can take full
-                                          charge of the thermal management.
-
-trip_point_[0-*]_temp           The temperature above which trip point will be fired
-                                Unit: millidegree Celsius
-                                RO
-                                Optional
-
-trip_point_[0-*]_type           Strings which indicate the type of the trip point
-                                E.g. it can be one of critical, hot, passive,
-                                    active[0-*] for ACPI thermal zone.
-                                RO
-                                Optional
-
-cdev[0-*]                       Sysfs link to the thermal cooling device node where the sys I/F
-                                for cooling device throttling control represents.
-                                RO
-                                Optional
-
-cdev[0-*]_trip_point            The trip point with which cdev[0-*] is associated in this thermal zone
-                                -1 means the cooling device is not associated with any trip point.
-                                RO
-                                Optional
-
-******************************
-* Cooling device  attributes *
-******************************
-
-type                            String which represents the type of device
-                                eg: For generic ACPI: this should be "Fan",
-                                "Processor" or "LCD"
-                                eg. For memory controller device on intel_menlow platform:
-                                this should be "Memory controller"
-                                RO
-                                Required
-
-max_state                       The maximum permissible cooling state of this cooling device.
-                                RO
-                                Required
-
-cur_state                       The current cooling state of this cooling device.
-                                the value can any integer numbers between 0 and max_state,
-                                cur_state == 0 means no cooling
-                                cur_state == max_state means the maximum cooling.
-                                RW
-                                Required
+type
+        Strings which represent the thermal zone type.
+        This is given by thermal zone driver as part of registration.
+        E.g: "acpitz" indicates it's an ACPI thermal device.
+        In order to keep it consistent with hwmon sys attribute; this should
+        be a short, lowercase string, not containing spaces nor dashes.
+        RO, Required
+
+temp
+        Current temperature as reported by thermal zone (sensor).
+        Unit: millidegree Celsius
+        RO, Required
+
+mode
+        One of the predefined values in [kernel, user].
+        This file gives information about the algorithm that is currently
+        managing the thermal zone. It can be either default kernel based
+        algorithm or user space application.
+        kernel  = Thermal management in kernel thermal zone driver.
+        user    = Preventing kernel thermal zone driver actions upon
+                  trip points so that user application can take full
+                  charge of the thermal management.
+        RW, Optional
+
+trip_point_[0-*]_temp
+        The temperature above which trip point will be fired.
+        Unit: millidegree Celsius
+        RO, Optional
+
+trip_point_[0-*]_type
+        Strings which indicate the type of the trip point.
+        E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+        thermal zone.
+        RO, Optional
+
+cdev[0-*]
+        Sysfs link to the thermal cooling device node where the sys I/F
+        for cooling device throttling control represents.
+        RO, Optional
+
+cdev[0-*]_trip_point
+        The trip point with which cdev[0-*] is associated in this thermal
+        zone; -1 means the cooling device is not associated with any trip
+        point.
+        RO, Optional
+
+passive
+        Attribute is only present for zones in which the passive cooling
+        policy is not supported by native thermal driver. Default is zero
+        and can be set to a temperature (in millidegrees) to enable a
+        passive trip point for the zone. Activation is done by polling with
+        an interval of 1 second.
+        Unit: millidegrees Celsius
+        RW, Optional
+
+*****************************
+* Cooling device attributes *
+*****************************
+
+type
+        String which represents the type of device, e.g:
+        - for generic ACPI: should be "Fan", "Processor" or "LCD"
+        - for memory controller device on intel_menlow platform:
+          should be "Memory controller".
+        RO, Required
+
+max_state
+        The maximum permissible cooling state of this cooling device.
+        RO, Required
+
+cur_state
+        The current cooling state of this cooling device.
+        The value can any integer numbers between 0 and max_state:
+        - cur_state == 0 means no cooling
+        - cur_state == max_state means the maximum cooling.
+        RW, Required
 
 3. A simple implementation
 
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
 
 /sys/class/thermal:
 
 |thermal_zone1:
-        |-----type:                     acpitz
-        |-----temp:                     37000
-        |-----mode:                     kernel
-        |-----trip_point_0_temp:        100000
-        |-----trip_point_0_type:        critical
-        |-----trip_point_1_temp:        80000
-        |-----trip_point_1_type:        passive
-        |-----trip_point_2_temp:        70000
-        |-----trip_point_2_type:        active0
-        |-----trip_point_3_temp:        60000
-        |-----trip_point_3_type:        active1
-        |-----cdev0:                    --->/sys/class/thermal/cooling_device0
-        |-----cdev0_trip_point:         1       /* cdev0 can be used for passive */
-        |-----cdev1:                    --->/sys/class/thermal/cooling_device3
-        |-----cdev1_trip_point:         2       /* cdev1 can be used for active[0]*/
+    |---type:                   acpitz
+    |---temp:                   37000
+    |---mode:                   kernel
+    |---trip_point_0_temp:      100000
+    |---trip_point_0_type:      critical
+    |---trip_point_1_temp:      80000
+    |---trip_point_1_type:      passive
+    |---trip_point_2_temp:      70000
+    |---trip_point_2_type:      active0
+    |---trip_point_3_temp:      60000
+    |---trip_point_3_type:      active1
+    |---cdev0:                  --->/sys/class/thermal/cooling_device0
+    |---cdev0_trip_point:       1       /* cdev0 can be used for passive */
+    |---cdev1:                  --->/sys/class/thermal/cooling_device3
+    |---cdev1_trip_point:       2       /* cdev1 can be used for active[0]*/
 
 |cooling_device0:
-        |-----type:                     Processor
-        |-----max_state:                8
-        |-----cur_state:                0
+    |---type:                   Processor
+    |---max_state:              8
+    |---cur_state:              0
 
 |cooling_device3:
-        |-----type:                     Fan
-        |-----max_state:                2
-        |-----cur_state:                0
+    |---type:                   Fan
+    |---max_state:              2
+    |---cur_state:              0
 
 /sys/class/hwmon:
 
 |hwmon0:
-        |-----name:                     acpitz
-        |-----temp1_input:              37000
-        |-----temp1_crit:               100000
+    |---name:                   acpitz
+    |---temp1_input:            37000
+    |---temp1_crit:             100000
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index 04763a325520..16d25e6b5a00 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -3,7 +3,7 @@
 The High Precision Event Timer (HPET) hardware follows a specification
 by Intel and Microsoft which can be found at
 
-        http://www.intel.com/technology/architecture/hpetspec.htm
+        http://www.intel.com/hardwaredesign/hpetspec_1.pdf
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index 7003e10f10f5..641a1ef2a7ff 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -213,10 +213,19 @@ If you can't trace NMI functions, then skip this option.
 <details to be filled>
 
 
-HAVE_FTRACE_SYSCALLS
+HAVE_SYSCALL_TRACEPOINTS
 ---------------------
 
-<details to be filled>
+You need very few things to get the syscalls tracing in an arch.
+
+- Have a NR_syscalls variable in <asm/unistd.h> that provides the number
+  of syscalls supported by the arch.
+- Implement arch_syscall_addr() that resolves a syscall address from a
+  syscall number.
+- Support the TIF_SYSCALL_TRACEPOINT thread flags
+- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
+  in the ptrace syscalls tracing path.
+- Tag this arch as HAVE_SYSCALL_TRACEPOINTS.
 
 
 HAVE_FTRACE_MCOUNT_RECORD
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
new file mode 100644
index 000000000000..47aabeebbdf6
--- /dev/null
+++ b/Documentation/trace/kprobetrace.txt
@@ -0,0 +1,149 @@
+                        Kprobe-based Event Tracing
+                        ==========================
+
+                 Documentation is written by Masami Hiramatsu
+
+
+Overview
+--------
+These events are similar to tracepoint based events. Instead of Tracepoint,
+this is based on kprobes (kprobe and kretprobe). So it can probe wherever
+kprobes can probe (this means, all functions body except for __kprobes
+functions). Unlike the Tracepoint based event, this can be added and removed
+dynamically, on the fly.
+
+To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y.
+
+Similar to the events tracer, this doesn't need to be activated via
+current_tracer. Instead of that, add probe points via
+/sys/kernel/debug/tracing/kprobe_events, and enable it via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/enabled.
+
+
+Synopsis of kprobe_events
+-------------------------
+  p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS]     : Set a probe
+  r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS]                : Set a return probe
+
+ GRP            : Group name. If omitted, use "kprobes" for it.
+ EVENT          : Event name. If omitted, the event name is generated
+                  based on SYMBOL+offs or MEMADDR.
+ SYMBOL[+offs]  : Symbol+offset where the probe is inserted.
+ MEMADDR        : Address where the probe is inserted.
+
+ FETCHARGS      : Arguments. Each probe can have up to 128 args.
+  %REG          : Fetch register REG
+  @ADDR         : Fetch memory at ADDR (ADDR should be in kernel)
+  @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
+  $stackN       : Fetch Nth entry of stack (N >= 0)
+  $stack        : Fetch stack address.
+  $argN         : Fetch function argument. (N >= 0)(*)
+  $retval       : Fetch return value.(**)
+  +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(***)
+  NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+
+  (*) aN may not correct on asmlinkaged functions and at the middle of
+      function body.
+  (**) only for return probe.
+  (***) this is useful for fetching a field of data structures.
+
+
+Per-Probe Event Filtering
+-------------------------
+ Per-probe event filtering feature allows you to set different filter on each
+probe and gives you what arguments will be shown in trace buffer. If an event
+name is specified right after 'p:' or 'r:' in kprobe_events, it adds an event
+under tracing/events/kprobes/<EVENT>, at the directory you can see 'id',
+'enabled', 'format' and 'filter'.
+
+enabled:
+  You can enable/disable the probe by writing 1 or 0 on it.
+
+format:
+  This shows the format of this probe event.
+
+filter:
+  You can write filtering rules of this event.
+
+id:
+  This shows the id of this probe event.
+
+
+Event Profiling
+---------------
+ You can check the total number of probe hits and probe miss-hits via
+/sys/kernel/debug/tracing/kprobe_profile.
+ The first column is event name, the second is the number of probe hits,
+the third is the number of probe miss-hits.
+
+
+Usage examples
+--------------
+To add a probe as a new event, write a new definition to kprobe_events
+as below.
+
+  echo p:myprobe do_sys_open dfd=$arg0 filename=$arg1 flags=$arg2 mode=$arg3 > /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kprobe on the top of do_sys_open() function with recording
+1st to 4th arguments as "myprobe" event. As this example shows, users can
+choose more familiar names for each arguments.
+
+  echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kretprobe on the return point of do_sys_open() function with
+recording return value as "myretprobe" event.
+ You can see the format of these events via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/format.
+
+  cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
+name: myprobe
+ID: 75
+format:
+        field:unsigned short common_type;       offset:0;       size:2;
+        field:unsigned char common_flags;       offset:2;       size:1;
+        field:unsigned char common_preempt_count;       offset:3;       size:1;
+        field:int common_pid;   offset:4;       size:4;
+        field:int common_tgid;  offset:8;       size:4;
+
+        field: unsigned long ip;        offset:16;tsize:8;
+        field: int nargs;       offset:24;tsize:4;
+        field: unsigned long dfd;       offset:32;tsize:8;
+        field: unsigned long filename;  offset:40;tsize:8;
+        field: unsigned long flags;     offset:48;tsize:8;
+        field: unsigned long mode;      offset:56;tsize:8;
+
+print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, REC->filename, REC->flags, REC->mode
+
+
+ You can see that the event has 4 arguments as in the expressions you specified.
+
+  echo > /sys/kernel/debug/tracing/kprobe_events
+
+ This clears all probe points.
+
+ Right after definition, each event is disabled by default. For tracing these
+events, you need to enable it.
+
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
+
+ And you can see the traced information via /sys/kernel/debug/tracing/trace.
+
+  cat /sys/kernel/debug/tracing/trace
+# tracer: nop
+#
+#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
+#              | |       |          |         |
+           <...>-1447  [001] 1038282.286875: myprobe: (do_sys_open+0x0/0xd6) dfd=3 filename=7fffd1ec4440 flags=8000 mode=0
+           <...>-1447  [001] 1038282.286878: myretprobe: (sys_openat+0xc/0xe <- do_sys_open) $retval=fffffffffffffffe
+           <...>-1447  [001] 1038282.286885: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=40413c flags=8000 mode=1b6
+           <...>-1447  [001] 1038282.286915: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+           <...>-1447  [001] 1038282.286969: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=4041c6 flags=98800 mode=10
+           <...>-1447  [001] 1038282.286976: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+
+
+ Each line shows when the kernel hits an event, and <- SYMBOL means kernel
+returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
+returns from do_sys_open to sys_open+0x1b).
+
+
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index ad642615ad4c..c7c1dc2f8017 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -2,7 +2,7 @@
 
                  Alan Stern <stern@rowland.harvard.edu>
 
-                            October 5, 2007
+                            November 10, 2009
 
 
 
@@ -123,9 +123,9 @@ relevant attribute files are: wakeup, level, and autosuspend.
 
         power/level
 
-                This file contains one of three words: "on", "auto",
-                or "suspend".  You can write those words to the file
-                to change the device's setting.
+                This file contains one of two words: "on" or "auto".
+                You can write those words to the file to change the
+                device's setting.
 
                 "on" means that the device should be resumed and
                 autosuspend is not allowed.  (Of course, system
@@ -134,10 +134,10 @@ relevant attribute files are: wakeup, level, and autosuspend.
                 "auto" is the normal state in which the kernel is
                 allowed to autosuspend and autoresume the device.
 
-                "suspend" means that the device should remain
-                suspended, and autoresume is not allowed.  (But remote
-                wakeup may still be allowed, since it is controlled
-                separately by the power/wakeup attribute.)
+                (In kernels up to 2.6.32, you could also specify
+                "suspend", meaning that the device should remain
+                suspended and autoresume was not allowed.  This
+                setting is no longer supported.)
 
         power/autosuspend
 
@@ -313,13 +313,14 @@ three of the methods listed above.  In addition, a driver indicates
 that it supports autosuspend by setting the .supports_autosuspend flag
 in its usb_driver structure.  It is then responsible for informing the
 USB core whenever one of its interfaces becomes busy or idle.  The
-driver does so by calling these five functions:
+driver does so by calling these six functions:
 
         int  usb_autopm_get_interface(struct usb_interface *intf);
         void usb_autopm_put_interface(struct usb_interface *intf);
-        int  usb_autopm_set_interface(struct usb_interface *intf);
         int  usb_autopm_get_interface_async(struct usb_interface *intf);
         void usb_autopm_put_interface_async(struct usb_interface *intf);
+        void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
+        void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
 
 The functions work by maintaining a counter in the usb_interface
 structure.  When intf->pm_usage_count is > 0 then the interface is
@@ -331,11 +332,13 @@ considered to be idle, and the kernel may autosuspend the device.
 associated with the device itself rather than any of its interfaces.
 This field is used only by the USB core.)
 
-The driver owns intf->pm_usage_count; it can modify the value however
-and whenever it likes.  A nice aspect of the non-async usb_autopm_*
-routines is that the changes they make are protected by the usb_device
-structure's PM mutex (udev->pm_mutex); however drivers may change
-pm_usage_count without holding the mutex.  Drivers using the async
+Drivers must not modify intf->pm_usage_count directly; its value
+should be changed only be using the functions listed above.  Drivers
+are responsible for insuring that the overall change to pm_usage_count
+during their lifetime balances out to 0 (it may be necessary for the
+disconnect method to call usb_autopm_put_interface() one or more times
+to fulfill this requirement).  The first two routines use the PM mutex
+in struct usb_device for mutual exclusion; drivers using the async
 routines are responsible for their own synchronization and mutual
 exclusion.
 
@@ -347,11 +350,6 @@ exclusion.
         attempts an autosuspend if the new value is <= 0 and the
         device isn't suspended.
 
-        usb_autopm_set_interface() leaves pm_usage_count alone.
-        It attempts an autoresume if the value is > 0 and the device
-        is suspended, and it attempts an autosuspend if the value is
-        <= 0 and the device isn't suspended.
-
         usb_autopm_get_interface_async() and
         usb_autopm_put_interface_async() do almost the same things as
         their non-async counterparts.  The differences are: they do
@@ -360,13 +358,11 @@ exclusion.
         such as an URB's completion handler, but when they return the
         device will not generally not yet be in the desired state.
 
-There also are a couple of utility routines drivers can use:
-
-        usb_autopm_enable() sets pm_usage_cnt to 0 and then calls
-        usb_autopm_set_interface(), which will attempt an autosuspend.
-
-        usb_autopm_disable() sets pm_usage_cnt to 1 and then calls
-        usb_autopm_set_interface(), which will attempt an autoresume.
+        usb_autopm_get_interface_no_resume() and
+        usb_autopm_put_interface_no_suspend() merely increment or
+        decrement the pm_usage_count value; they do not attempt to
+        carry out an autoresume or an autosuspend.  Hence they can be
+        called in an atomic context.
 
 The conventional usage pattern is that a driver calls
 usb_autopm_get_interface() in its open routine and
@@ -400,11 +396,11 @@ though, setting this flag won't cause the kernel to autoresume it.
 Normally a driver would set this flag in its probe method, at which
 time the device is guaranteed not to be autosuspended.)
 
-The usb_autopm_* routines have to run in a sleepable process context;
-they must not be called from an interrupt handler or while holding a
-spinlock.  In fact, the entire autosuspend mechanism is not well geared
-toward interrupt-driven operation.  However there is one thing a
-driver can do in an interrupt handler:
+The synchronous usb_autopm_* routines have to run in a sleepable
+process context; they must not be called from an interrupt handler or
+while holding a spinlock.  In fact, the entire autosuspend mechanism
+is not well geared toward interrupt-driven operation.  However there
+is one thing a driver can do in an interrupt handler:
 
         usb_mark_last_busy(struct usb_device *udev);
 
@@ -423,15 +419,16 @@ an URB had completed too recently.
 
 External suspend calls should never be allowed to fail in this way,
 only autosuspend calls.  The driver can tell them apart by checking
-udev->auto_pm; this flag will be set to 1 for internal PM events
-(autosuspend or autoresume) and 0 for external PM events.
+the PM_EVENT_AUTO bit in the message.event argument to the suspend
+method; this bit will be set for internal PM events (autosuspend) and
+clear for external PM events.
 
 Many of the ingredients in the autosuspend framework are oriented
 towards interfaces: The usb_interface structure contains the
 pm_usage_cnt field, and the usb_autopm_* routines take an interface
 pointer as their argument.  But somewhat confusingly, a few of the
-pieces (usb_mark_last_busy() and udev->auto_pm) use the usb_device
-structure instead.  Drivers need to keep this straight; they can call
+pieces (i.e., usb_mark_last_busy()) use the usb_device structure
+instead.  Drivers need to keep this straight; they can call
 interface_to_usbdev() to find the device structure for a given
 interface.
 
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 5f33d8486102..7539e8fa1ffd 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -24,3 +24,5 @@
  23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
  24 -> Hauppauge WinTV-HVR1850                             [0070:8541]
  25 -> Compro VideoMate E800                               [1858:e800]
+ 26 -> Hauppauge WinTV-HVR1290                             [0070:8551]
+ 27 -> Mygica X8558 PRO DMB-TH                             [14f1:8578]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 3385f8b094a5..7ec3c4e4b60f 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -81,3 +81,4 @@
  80 -> Hauppauge WinTV-IR Only                             [0070:9290]
  81 -> Leadtek WinFast DTV1800 Hybrid                      [107d:6654]
  82 -> WinFast DTV2000 H rev. J                            [107d:6f2b]
+ 83 -> Prof 7301 DVB-S/S2                                  [b034:3034]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index b8afef4c0e01..0c166ff003a0 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
@@ -69,3 +69,4 @@
  71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)
  72 -> Gadmei UTV330+                           (em2861)
  73 -> Reddo DVB-C USB TV Box                   (em2870)
+ 74 -> Actionmaster/LinXcel/Digitus VC211A      (em2800)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 2620d60341ee..fce1e7eb0474 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -172,3 +172,5 @@
 171 -> Beholder BeholdTV X7                     [5ace:7595]
 172 -> RoverMedia TV Link Pro FM                [19d1:0138]
 173 -> Zolid Hybrid TV Tuner PCI                [1131:2004]
+174 -> Asus Europa Hybrid OEM                   [1043:4847]
+175 -> Leadtek Winfast DTV1000S                 [107d:6655]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 3f61825be499..1800a62cf135 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -6,11 +6,13 @@ The modules are:
 
 xxxx            vend:prod
 ----
-spca501         0000:0000       MystFromOri Unknow Camera
+spca501         0000:0000       MystFromOri Unknown Camera
+spca508         0130:0130       Clone Digital Webcam 11043
 m5602           0402:5602       ALi Video Camera Controller
 spca501         040a:0002       Kodak DVC-325
 spca500         040a:0300       Kodak EZ200
 zc3xx           041e:041e       Creative WebCam Live!
+ov519           041e:4003       Video Blaster WebCam Go Plus
 spca500         041e:400a       Creative PC-CAM 300
 sunplus         041e:400b       Creative PC-CAM 600
 sunplus         041e:4012       PC-Cam350
@@ -37,6 +39,7 @@ ov519		041e:405f	Creative Live! VISTA VF0330
 ov519           041e:4060       Creative Live! VISTA VF0350
 ov519           041e:4061       Creative Live! VISTA VF0400
 ov519           041e:4064       Creative Live! VISTA VF0420
+ov519           041e:4067       Creative Live! Cam Video IM (VF0350)
 ov519           041e:4068       Creative Live! VISTA VF0470
 spca561         0458:7004       Genius VideoCAM Express V2
 sunplus         0458:7006       Genius Dsc 1.3 Smart
@@ -68,12 +71,12 @@ zc3xx		046d:08a3	Logitech QC Chat
 zc3xx           046d:08a6       Logitech QCim
 zc3xx           046d:08a7       Logitech QuickCam Image
 zc3xx           046d:08a9       Logitech Notebook Deluxe
-zc3xx           046d:08aa       Labtec Webcam  Notebook
+zc3xx           046d:08aa       Labtec Webcam Notebook
 zc3xx           046d:08ac       Logitech QuickCam Cool
 zc3xx           046d:08ad       Logitech QCCommunicate STX
 zc3xx           046d:08ae       Logitech QuickCam for Notebooks
 zc3xx           046d:08af       Logitech QuickCam Cool
-zc3xx           046d:08b9       Logitech QC IM ???
+zc3xx           046d:08b9       Logitech QuickCam Express
 zc3xx           046d:08d7       Logitech QCam STX
 zc3xx           046d:08d9       Logitech QuickCam IM/Connect
 zc3xx           046d:08d8       Logitech Notebook Deluxe
@@ -82,7 +85,7 @@ zc3xx		046d:08dd	Logitech QuickCam for Notebooks
 spca500         046d:0900       Logitech Inc. ClickSmart 310
 spca500         046d:0901       Logitech Inc. ClickSmart 510
 sunplus         046d:0905       Logitech ClickSmart 820
-tv8532          046d:0920       QC Express
+tv8532          046d:0920       Logitech QuickCam Express
 tv8532          046d:0921       Labtec Webcam
 spca561         046d:0928       Logitech QC Express Etch2
 spca561         046d:0929       Labtec Webcam Elch2
@@ -91,7 +94,7 @@ spca561		046d:092b	Labtec Webcam Plus
 spca561         046d:092c       Logitech QC chat Elch2
 spca561         046d:092d       Logitech QC Elch2
 spca561         046d:092e       Logitech QC Elch2
-spca561         046d:092f       Logitech  QuickCam Express Plus
+spca561         046d:092f       Logitech QuickCam Express Plus
 sunplus         046d:0960       Logitech ClickSmart 420
 sunplus         0471:0322       Philips DMVC1300K
 zc3xx           0471:0325       Philips SPC 200 NC
@@ -166,10 +169,14 @@ sunplus		055f:c650	Mustek MDC5500Z
 zc3xx           055f:d003       Mustek WCam300A
 zc3xx           055f:d004       Mustek WCam300 AN
 conex           0572:0041       Creative Notebook cx11646
+ov519           05a9:0511       Video Blaster WebCam 3/WebCam Plus, D-Link USB Digital Video Camera
+ov519           05a9:0518       Creative WebCam
 ov519           05a9:0519       OV519 Microphone
 ov519           05a9:0530       OmniVision
+ov519           05a9:2800       OmniVision SuperCAM
 ov519           05a9:4519       Webcam Classic
 ov519           05a9:8519       OmniVision
+ov519           05a9:a511       D-Link USB Digital Video Camera
 ov519           05a9:a518       D-Link DSB-C310 Webcam
 sunplus         05da:1018       Digital Dream Enigma 1.3
 stk014          05e1:0893       Syntek DV4000
@@ -185,9 +192,8 @@ ov534		06f8:3002	Hercules Blog Webcam
 ov534           06f8:3003       Hercules Dualpix HD Weblog
 sonixj          06f8:3004       Hercules Classic Silver
 sonixj          06f8:3008       Hercules Deluxe Optical Glass
-pac7311         06f8:3009       Hercules Classic Link
+pac7302         06f8:3009       Hercules Classic Link
 spca508         0733:0110       ViewQuest VQ110
-spca508         0130:0130       Clone Digital Webcam 11043
 spca501         0733:0401       Intel Create and Share
 spca501         0733:0402       ViewQuest M318B
 spca505         0733:0430       Intel PC Camera Pro
@@ -198,10 +204,12 @@ sunplus		0733:2221	Mercury Digital Pro 3.1p
 sunplus         0733:3261       Concord 3045 spca536a
 sunplus         0733:3281       Cyberpix S550V
 spca506         0734:043b       3DeMon USB Capture aka
+ov519           0813:0002       Dual Mode USB Camera Plus
 spca500         084d:0003       D-Link DSC-350
 spca500         08ca:0103       Aiptek PocketDV
 sunplus         08ca:0104       Aiptek PocketDVII 1.3
 sunplus         08ca:0106       Aiptek Pocket DV3100+
+mr97310a        08ca:0110       Trust Spyc@m 100
 mr97310a        08ca:0111       Aiptek PenCam VGA+
 sunplus         08ca:2008       Aiptek Mini PenCam 2 M
 sunplus         08ca:2010       Aiptek PocketCam 3M
@@ -222,7 +230,7 @@ pac207		093a:2460	Qtec Webcam 100
 pac207          093a:2461       HP Webcam
 pac207          093a:2463       Philips SPC 220 NC
 pac207          093a:2464       Labtec Webcam 1200
-pac207          093a:2468       PAC207
+pac207          093a:2468       Webcam WB-1400T
 pac207          093a:2470       Genius GF112
 pac207          093a:2471       Genius VideoCam ge111
 pac207          093a:2472       Genius VideoCam ge110
@@ -230,18 +238,19 @@ pac207		093a:2474	Genius iLook 111
 pac207          093a:2476       Genius e-Messenger 112
 pac7311         093a:2600       PAC7311 Typhoon
 pac7311         093a:2601       Philips SPC 610 NC
-pac7311         093a:2603       PAC7312
+pac7311         093a:2603       Philips SPC 500 NC
 pac7311         093a:2608       Trust WB-3300p
 pac7311         093a:260e       Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
 pac7311         093a:260f       SnakeCam
-pac7311         093a:2620       Apollo AC-905
-pac7311         093a:2621       PAC731x
-pac7311         093a:2622       Genius Eye 312
-pac7311         093a:2624       PAC7302
-pac7311         093a:2626       Labtec 2200
-pac7311         093a:2629       Genious iSlim 300
-pac7311         093a:262a       Webcam 300k
-pac7311         093a:262c       Philips SPC 230 NC
+pac7302         093a:2620       Apollo AC-905
+pac7302         093a:2621       PAC731x
+pac7302         093a:2622       Genius Eye 312
+pac7302         093a:2624       PAC7302
+pac7302         093a:2626       Labtec 2200
+pac7302         093a:2628       Genius iLook 300
+pac7302         093a:2629       Genious iSlim 300
+pac7302         093a:262a       Webcam 300k
+pac7302         093a:262c       Philips SPC 230 NC
 jeilinj         0979:0280       Sakar 57379
 zc3xx           0ac8:0302       Z-star Vimicro zc0302
 vc032x          0ac8:0321       Vimicro generic vc0321
@@ -250,12 +259,13 @@ vc032x		0ac8:0328	A4Tech PK-130MG
 zc3xx           0ac8:301b       Z-Star zc301b
 zc3xx           0ac8:303b       Vimicro 0x303b
 zc3xx           0ac8:305b       Z-star Vimicro zc0305b
-zc3xx           0ac8:307b       Ldlc VC302+Ov7620
+zc3xx           0ac8:307b       PC Camera (ZS0211)
 vc032x          0ac8:c001       Sony embedded vimicro
 vc032x          0ac8:c002       Sony embedded vimicro
 vc032x          0ac8:c301       Samsung Q1 Ultra Premium
 spca508         0af9:0010       Hama USB Sightcam 100
 spca508         0af9:0011       Hama USB Sightcam 100
+ov519           0b62:0059       iBOT2 Webcam
 sonixb          0c45:6001       Genius VideoCAM NB
 sonixb          0c45:6005       Microdia Sweex Mini Webcam
 sonixb          0c45:6007       Sonix sn9c101 + Tas5110D
@@ -315,8 +325,10 @@ sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
 sn9c20x         0c45:62bb       PC Camera (SN9C202 + OV7660)
 sn9c20x         0c45:62bc       PC Camera (SN9C202 + HV7131R)
 sunplus         0d64:0303       Sunplus FashionCam DXG
+ov519           0e96:c001       TRUST 380 USB2 SPACEC@M
 etoms           102c:6151       Qcam Sangha CIF
 etoms           102c:6251       Qcam xxxxxx VGA
+ov519           1046:9967       W9967CF/W9968CF WebCam IC, Video Blaster WebCam Go
 zc3xx           10fd:0128       Typhoon Webshot II USB 300k 0x0128
 spca561         10fd:7e50       FlyCam Usb 100
 zc3xx           10fd:8050       Typhoon Webshot II USB 300k
@@ -329,7 +341,12 @@ spca501		1776:501c	Arowana 300K CMOS Camera
 t613            17a1:0128       TASCORP JPEG Webcam, NGS Cyclops
 vc032x          17ef:4802       Lenovo Vc0323+MI1310_SOC
 pac207          2001:f115       D-Link DSB-C120
+sq905c          2770:9050       sq905c
+sq905c          2770:905c       DualCamera
+sq905           2770:9120       Argus Digital Camera DC1512
+sq905c          2770:913d       sq905c
 spca500         2899:012c       Toptro Industrial
+ov519           8020:ef04       ov519
 spca508         8086:0110       Intel Easy PC Camera
 spca500         8086:0630       Intel Pocket PC Camera
 spca506         99fa:8988       Grandtec V.cap
diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt
new file mode 100644
index 000000000000..2ae16349a78d
--- /dev/null
+++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt
@@ -0,0 +1,157 @@
+        Cropping and Scaling algorithm, used in the sh_mobile_ceu_camera driver
+        =======================================================================
+
+Terminology
+-----------
+
+sensor scales: horizontal and vertical scales, configured by the sensor driver
+host scales: -"- host driver
+combined scales: sensor_scale * host_scale
+
+
+Generic scaling / cropping scheme
+---------------------------------
+
+-1--
+|
+-2-- -\
+|      --\
+|         --\
++-5-- -\     -- -3--
+|       ---\
+|           --- -4-- -\
+|                      -\
+|                        - -6--
+|
+|                        - -6'-
+|                      -/
+|           --- -4'- -/
+|       ---/
++-5'- -/
+|            -- -3'-
+|         --/
+|      --/
+-2'- -/
+|
+|
+-1'-
+
+Produced by user requests:
+
+S_CROP(left / top = (5) - (1), width / height = (5') - (5))
+S_FMT(width / height = (6') - (6))
+
+Here:
+
+(1) to (1') - whole max width or height
+(1) to (2)  - sensor cropped left or top
+(2) to (2') - sensor cropped width or height
+(3) to (3') - sensor scale
+(3) to (4)  - CEU cropped left or top
+(4) to (4') - CEU cropped width or height
+(5) to (5') - reverse sensor scale applied to CEU cropped width or height
+(2) to (5)  - reverse sensor scale applied to CEU cropped left or top
+(6) to (6') - CEU scale - user window
+
+
+S_FMT
+-----
+
+Do not touch input rectangle - it is already optimal.
+
+1. Calculate current sensor scales:
+
+        scale_s = ((3') - (3)) / ((2') - (2))
+
+2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
+current sensor scales onto input window - this is user S_CROP:
+
+        width_u = (5') - (5) = ((4') - (4)) * scale_s
+
+3. Calculate new combined scales from "effective" input window to requested user
+window:
+
+        scale_comb = width_u / ((6') - (6))
+
+4. Calculate sensor output window by applying combined scales to real input
+window:
+
+        width_s_out = ((2') - (2)) / scale_comb
+
+5. Apply iterative sensor S_FMT for sensor output window.
+
+        subdev->video_ops->s_fmt(.width = width_s_out)
+
+6. Retrieve sensor output window (g_fmt)
+
+7. Calculate new sensor scales:
+
+        scale_s_new = ((3')_new - (3)_new) / ((2') - (2))
+
+8. Calculate new CEU crop - apply sensor scales to previously calculated
+"effective" crop:
+
+        width_ceu = (4')_new - (4)_new = width_u / scale_s_new
+        left_ceu = (4)_new - (3)_new = ((5) - (2)) / scale_s_new
+
+9. Use CEU cropping to crop to the new window:
+
+        ceu_crop(.width = width_ceu, .left = left_ceu)
+
+10. Use CEU scaling to scale to the requested user window:
+
+        scale_ceu = width_ceu / width
+
+
+S_CROP
+------
+
+If old scale applied to new crop is invalid produce nearest new scale possible
+
+1. Calculate current combined scales.
+
+        scale_comb = (((4') - (4)) / ((6') - (6))) * (((2') - (2)) / ((3') - (3)))
+
+2. Apply iterative sensor S_CROP for new input window.
+
+3. If old combined scales applied to new crop produce an impossible user window,
+adjust scales to produce nearest possible window.
+
+        width_u_out = ((5') - (5)) / scale_comb
+
+        if (width_u_out > max)
+                scale_comb = ((5') - (5)) / max;
+        else if (width_u_out < min)
+                scale_comb = ((5') - (5)) / min;
+
+4. Issue G_CROP to retrieve actual input window.
+
+5. Using actual input window and calculated combined scales calculate sensor
+target output window.
+
+        width_s_out = ((3') - (3)) = ((2') - (2)) / scale_comb
+
+6. Apply iterative S_FMT for new sensor target output window.
+
+7. Issue G_FMT to retrieve the actual sensor output window.
+
+8. Calculate sensor scales.
+
+        scale_s = ((3') - (3)) / ((2') - (2))
+
+9. Calculate sensor output subwindow to be cropped on CEU by applying sensor
+scales to the requested window.
+
+        width_ceu = ((5') - (5)) / scale_s
+
+10. Use CEU cropping for above calculated window.
+
+11. Calculate CEU scales from sensor scales from results of (10) and user window
+from (3)
+
+        scale_ceu = calc_scale(((5') - (5)), &width_u_out)
+
+12. Apply CEU scales.
+
+--
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
diff --git a/Documentation/video4linux/si4713.txt b/Documentation/video4linux/si4713.txt
index 25abdb78209d..2e7392a4fee1 100644
--- a/Documentation/video4linux/si4713.txt
+++ b/Documentation/video4linux/si4713.txt
@@ -164,7 +164,7 @@ Stereo/Mono and RDS subchannels
 
 The device can also be configured using the available sub channels for
 transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly.
-Refer to v4l2-spec for proper use of this ioctl.
+Refer to the V4L2 API specification for proper use of this ioctl.
 
 Testing
 =======
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index b806edaf3e75..74d677c8b036 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -561,6 +561,8 @@ video_device helper functions
 
 There are a few useful helper functions:
 
+- file/video_device private data
+
 You can set/get driver private data in the video_device struct using:
 
 void *video_get_drvdata(struct video_device *vdev);
@@ -575,8 +577,7 @@ struct video_device *video_devdata(struct file *file);
 
 returns the video_device belonging to the file struct.
 
-The final helper function combines video_get_drvdata with
-video_devdata:
+The video_drvdata function combines video_get_drvdata with video_devdata:
 
 void *video_drvdata(struct file *file);
 
@@ -584,6 +585,17 @@ You can go from a video_device struct to the v4l2_device struct using:
 
 struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
 
+- Device node name
+
+The video_device node kernel name can be retrieved using
+
+const char *video_device_node_name(struct video_device *vdev);
+
+The name is used as a hint by userspace tools such as udev. The function
+should be used where possible instead of accessing the video_device::num and
+video_device::minor fields.
+
+
 video buffer helper functions
 -----------------------------
 
diff --git a/Documentation/video4linux/zr364xx.txt b/Documentation/video4linux/zr364xx.txt
index 7f3d1955d214..d98e4d302977 100644
--- a/Documentation/video4linux/zr364xx.txt
+++ b/Documentation/video4linux/zr364xx.txt
@@ -66,3 +66,4 @@ Vendor  Product  Distributor     Model
 0x0a17  0x004e   Pentax          Optio 50
 0x041e  0x405d   Creative        DiVi CAM 516
 0x08ca  0x2102   Aiptek          DV T300
+0x06d6  0x003d   Trust           Powerc@m 910Z
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 82a7bd1800b2..bc31636973e3 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -11,23 +11,21 @@ This optimization is more critical now as bigger and bigger physical memories
 (several GBs) are more readily available.
 
 Users can use the huge page support in Linux kernel by either using the mmap
-system call or standard SYSv shared memory system calls (shmget, shmat).
+system call or standard SYSV shared memory system calls (shmget, shmat).
 
 First the Linux kernel needs to be built with the CONFIG_HUGETLBFS
 (present under "File systems") and CONFIG_HUGETLB_PAGE (selected
 automatically when CONFIG_HUGETLBFS is selected) configuration
 options.
 
-The kernel built with huge page support should show the number of configured
-huge pages in the system by running the "cat /proc/meminfo" command.
+The /proc/meminfo file provides information about the total number of
+persistent hugetlb pages in the kernel's huge page pool.  It also displays
+information about the number of free, reserved and surplus huge pages and the
+default huge page size.  The huge page size is needed for generating the
+proper alignment and size of the arguments to system calls that map huge page
+regions.
 
-/proc/meminfo also provides information about the total number of hugetlb
-pages configured in the kernel.  It also displays information about the
-number of free hugetlb pages at any time.  It also displays information about
-the configured huge page size - this is needed for generating the proper
-alignment and size of the arguments to the above system calls.
-
-The output of "cat /proc/meminfo" will have lines like:
+The output of "cat /proc/meminfo" will include lines like:
 
 .....
 HugePages_Total: vvv
@@ -53,59 +51,63 @@ HugePages_Surp  is short for "surplus," and is the number of huge pages in
 /proc/filesystems should also show a filesystem of type "hugetlbfs" configured
 in the kernel.
 
-/proc/sys/vm/nr_hugepages indicates the current number of configured hugetlb
-pages in the kernel.  Super user can dynamically request more (or free some
-pre-configured) huge pages.
-The allocation (or deallocation) of hugetlb pages is possible only if there are
-enough physically contiguous free pages in system (freeing of huge pages is
-possible only if there are enough hugetlb pages free that can be transferred
-back to regular memory pool).
+/proc/sys/vm/nr_hugepages indicates the current number of "persistent" huge
+pages in the kernel's huge page pool.  "Persistent" huge pages will be
+returned to the huge page pool when freed by a task.  A user with root
+privileges can dynamically allocate more or free some persistent huge pages
+by increasing or decreasing the value of 'nr_hugepages'.
 
-Pages that are used as hugetlb pages are reserved inside the kernel and cannot
-be used for other purposes.
+Pages that are used as huge pages are reserved inside the kernel and cannot
+be used for other purposes.  Huge pages cannot be swapped out under
+memory pressure.
 
-Once the kernel with Hugetlb page support is built and running, a user can
-use either the mmap system call or shared memory system calls to start using
-the huge pages.  It is required that the system administrator preallocate
-enough memory for huge page purposes.
+Once a number of huge pages have been pre-allocated to the kernel huge page
+pool, a user with appropriate privilege can use either the mmap system call
+or shared memory system calls to use the huge pages.  See the discussion of
+Using Huge Pages, below.
 
-The administrator can preallocate huge pages on the kernel boot command line by
-specifying the "hugepages=N" parameter, where 'N' = the number of huge pages
-requested.  This is the most reliable method for preallocating huge pages as
-memory has not yet become fragmented.
+The administrator can allocate persistent huge pages on the kernel boot
+command line by specifying the "hugepages=N" parameter, where 'N' = the
+number of huge pages requested.  This is the most reliable method of
+allocating huge pages as memory has not yet become fragmented.
 
-Some platforms support multiple huge page sizes.  To preallocate huge pages
+Some platforms support multiple huge page sizes.  To allocate huge pages
 of a specific size, one must preceed the huge pages boot command parameters
 with a huge page size selection parameter "hugepagesz=<size>".  <size> must
 be specified in bytes with optional scale suffix [kKmMgG].  The default huge
 page size may be selected with the "default_hugepagesz=<size>" boot parameter.
 
-/proc/sys/vm/nr_hugepages indicates the current number of configured [default
-size] hugetlb pages in the kernel.  Super user can dynamically request more
-(or free some pre-configured) huge pages.
-
-Use the following command to dynamically allocate/deallocate default sized
-huge pages:
+When multiple huge page sizes are supported, /proc/sys/vm/nr_hugepages
+indicates the current number of pre-allocated huge pages of the default size.
+Thus, one can use the following command to dynamically allocate/deallocate
+default sized persistent huge pages:
 
         echo 20 > /proc/sys/vm/nr_hugepages
 
-This command will try to configure 20 default sized huge pages in the system.
+This command will try to adjust the number of default sized huge pages in the
+huge page pool to 20, allocating or freeing huge pages, as required.
+
 On a NUMA platform, the kernel will attempt to distribute the huge page pool
-over the all on-line nodes.  These huge pages, allocated when nr_hugepages
-is increased, are called "persistent huge pages".
+over all the set of allowed nodes specified by the NUMA memory policy of the
+task that modifies nr_hugepages.  The default for the allowed nodes--when the
+task has default memory policy--is all on-line nodes with memory.  Allowed
+nodes with insufficient available, contiguous memory for a huge page will be
+silently skipped when allocating persistent huge pages.  See the discussion
+below of the interaction of task memory policy, cpusets and per node attributes
+with the allocation and freeing of persistent huge pages.
 
 The success or failure of huge page allocation depends on the amount of
-physically contiguous memory that is preset in system at the time of the
+physically contiguous memory that is present in system at the time of the
 allocation attempt.  If the kernel is unable to allocate huge pages from
 some nodes in a NUMA system, it will attempt to make up the difference by
 allocating extra pages on other nodes with sufficient available contiguous
 memory, if any.
 
-System administrators may want to put this command in one of the local rc init
-files.  This will enable the kernel to request huge pages early in the boot
-process when the possibility of getting physical contiguous pages is still
-very high.  Administrators can verify the number of huge pages actually
-allocated by checking the sysctl or meminfo.  To check the per node
+System administrators may want to put this command in one of the local rc
+init files.  This will enable the kernel to allocate huge pages early in
+the boot process when the possibility of getting physical contiguous pages
+is still very high.  Administrators can verify the number of huge pages
+actually allocated by checking the sysctl or meminfo.  To check the per node
 distribution of huge pages in a NUMA system, use:
 
         cat /sys/devices/system/node/node*/meminfo | fgrep Huge
@@ -113,45 +115,47 @@ distribution of huge pages in a NUMA system, use:
 /proc/sys/vm/nr_overcommit_hugepages specifies how large the pool of
 huge pages can grow, if more huge pages than /proc/sys/vm/nr_hugepages are
 requested by applications.  Writing any non-zero value into this file
-indicates that the hugetlb subsystem is allowed to try to obtain "surplus"
-huge pages from the buddy allocator, when the normal pool is exhausted. As
-these surplus huge pages go out of use, they are freed back to the buddy
-allocator.
+indicates that the hugetlb subsystem is allowed to try to obtain that
+number of "surplus" huge pages from the kernel's normal page pool, when the
+persistent huge page pool is exhausted. As these surplus huge pages become
+unused, they are freed back to the kernel's normal page pool.
 
-When increasing the huge page pool size via nr_hugepages, any surplus
+When increasing the huge page pool size via nr_hugepages, any existing surplus
 pages will first be promoted to persistent huge pages.  Then, additional
 huge pages will be allocated, if necessary and if possible, to fulfill
-the new huge page pool size.
+the new persistent huge page pool size.
 
-The administrator may shrink the pool of preallocated huge pages for
+The administrator may shrink the pool of persistent huge pages for
 the default huge page size by setting the nr_hugepages sysctl to a
 smaller value.  The kernel will attempt to balance the freeing of huge pages
-across all on-line nodes.  Any free huge pages on the selected nodes will
-be freed back to the buddy allocator.
-
-Caveat: Shrinking the pool via nr_hugepages such that it becomes less
-than the number of huge pages in use will convert the balance to surplus
-huge pages even if it would exceed the overcommit value.  As long as
-this condition holds, however, no more surplus huge pages will be
-allowed on the system until one of the two sysctls are increased
-sufficiently, or the surplus huge pages go out of use and are freed.
+across all nodes in the memory policy of the task modifying nr_hugepages.
+Any free huge pages on the selected nodes will be freed back to the kernel's
+normal page pool.
+
+Caveat: Shrinking the persistent huge page pool via nr_hugepages such that
+it becomes less than the number of huge pages in use will convert the balance
+of the in-use huge pages to surplus huge pages.  This will occur even if
+the number of surplus pages it would exceed the overcommit value.  As long as
+this condition holds--that is, until nr_hugepages+nr_overcommit_hugepages is
+increased sufficiently, or the surplus huge pages go out of use and are freed--
+no more surplus huge pages will be allowed to be allocated.
 
 With support for multiple huge page pools at run-time available, much of
-the huge page userspace interface has been duplicated in sysfs. The above
-information applies to the default huge page size which will be
-controlled by the /proc interfaces for backwards compatibility. The root
-huge page control directory in sysfs is:
+the huge page userspace interface in /proc/sys/vm has been duplicated in sysfs.
+The /proc interfaces discussed above have been retained for backwards
+compatibility. The root huge page control directory in sysfs is:
 
         /sys/kernel/mm/hugepages
 
 For each huge page size supported by the running kernel, a subdirectory
-will exist, of the form
+will exist, of the form:
 
         hugepages-${size}kB
 
 Inside each of these directories, the same set of files will exist:
 
         nr_hugepages
+        nr_hugepages_mempolicy
         nr_overcommit_hugepages
         free_hugepages
         resv_hugepages
@@ -159,6 +163,102 @@ Inside each of these directories, the same set of files will exist:
 
 which function as described above for the default huge page-sized case.
 
+
+Interaction of Task Memory Policy with Huge Page Allocation/Freeing
+
+Whether huge pages are allocated and freed via the /proc interface or
+the /sysfs interface using the nr_hugepages_mempolicy attribute, the NUMA
+nodes from which huge pages are allocated or freed are controlled by the
+NUMA memory policy of the task that modifies the nr_hugepages_mempolicy
+sysctl or attribute.  When the nr_hugepages attribute is used, mempolicy
+is ignored.
+
+The recommended method to allocate or free huge pages to/from the kernel
+huge page pool, using the nr_hugepages example above, is:
+
+    numactl --interleave <node-list> echo 20 \
+                                >/proc/sys/vm/nr_hugepages_mempolicy
+
+or, more succinctly:
+
+    numactl -m <node-list> echo 20 >/proc/sys/vm/nr_hugepages_mempolicy
+
+This will allocate or free abs(20 - nr_hugepages) to or from the nodes
+specified in <node-list>, depending on whether number of persistent huge pages
+is initially less than or greater than 20, respectively.  No huge pages will be
+allocated nor freed on any node not included in the specified <node-list>.
+
+When adjusting the persistent hugepage count via nr_hugepages_mempolicy, any
+memory policy mode--bind, preferred, local or interleave--may be used.  The
+resulting effect on persistent huge page allocation is as follows:
+
+1) Regardless of mempolicy mode [see Documentation/vm/numa_memory_policy.txt],
+   persistent huge pages will be distributed across the node or nodes
+   specified in the mempolicy as if "interleave" had been specified.
+   However, if a node in the policy does not contain sufficient contiguous
+   memory for a huge page, the allocation will not "fallback" to the nearest
+   neighbor node with sufficient contiguous memory.  To do this would cause
+   undesirable imbalance in the distribution of the huge page pool, or
+   possibly, allocation of persistent huge pages on nodes not allowed by
+   the task's memory policy.
+
+2) One or more nodes may be specified with the bind or interleave policy.
+   If more than one node is specified with the preferred policy, only the
+   lowest numeric id will be used.  Local policy will select the node where
+   the task is running at the time the nodes_allowed mask is constructed.
+   For local policy to be deterministic, the task must be bound to a cpu or
+   cpus in a single node.  Otherwise, the task could be migrated to some
+   other node at any time after launch and the resulting node will be
+   indeterminate.  Thus, local policy is not very useful for this purpose.
+   Any of the other mempolicy modes may be used to specify a single node.
+
+3) The nodes allowed mask will be derived from any non-default task mempolicy,
+   whether this policy was set explicitly by the task itself or one of its
+   ancestors, such as numactl.  This means that if the task is invoked from a
+   shell with non-default policy, that policy will be used.  One can specify a
+   node list of "all" with numactl --interleave or --membind [-m] to achieve
+   interleaving over all nodes in the system or cpuset.
+
+4) Any task mempolicy specifed--e.g., using numactl--will be constrained by
+   the resource limits of any cpuset in which the task runs.  Thus, there will
+   be no way for a task with non-default policy running in a cpuset with a
+   subset of the system nodes to allocate huge pages outside the cpuset
+   without first moving to a cpuset that contains all of the desired nodes.
+
+5) Boot-time huge page allocation attempts to distribute the requested number
+   of huge pages over all on-lines nodes with memory.
+
+Per Node Hugepages Attributes
+
+A subset of the contents of the root huge page control directory in sysfs,
+described above, will be replicated under each the system device of each
+NUMA node with memory in:
+
+        /sys/devices/system/node/node[0-9]*/hugepages/
+
+Under this directory, the subdirectory for each supported huge page size
+contains the following attribute files:
+
+        nr_hugepages
+        free_hugepages
+        surplus_hugepages
+
+The free_' and surplus_' attribute files are read-only.  They return the number
+of free and surplus [overcommitted] huge pages, respectively, on the parent
+node.
+
+The nr_hugepages attribute returns the total number of huge pages on the
+specified node.  When this attribute is written, the number of persistent huge
+pages on the parent node will be adjusted to the specified value, if sufficient
+resources exist, regardless of the task's mempolicy or cpuset constraints.
+
+Note that the number of overcommit and reserve pages remain global quantities,
+as we don't know until fault time, when the faulting task's mempolicy is
+applied, from which node the huge page allocation will be attempted.
+
+
+Using Huge Pages
+
 If the user applications are going to request huge pages using mmap system
 call, then it is required that system administrator mount a file system of
 type hugetlbfs:
@@ -206,9 +306,11 @@ map_hugetlb.c.
  * requesting huge pages.
  *
  * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages.  That means the addresses starting with 0x800000... will need
- * to be specified.  Specifying a fixed address is not required on ppc64,
- * i386 or x86_64.
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
  *
  * Note: The default shared memory limit is quite low on many kernels,
  * you may need to increase it via:
@@ -237,14 +339,8 @@ map_hugetlb.c.
 
 #define dprintf(x)  printf(x)
 
-/* Only ia64 requires this */
-#ifdef __ia64__
-#define ADDR (void *)(0x8000000000000000UL)
-#define SHMAT_FLAGS (SHM_RND)
-#else
-#define ADDR (void *)(0x0UL)
+#define ADDR (void *)(0x0UL)    /* let kernel choose address */
 #define SHMAT_FLAGS (0)
-#endif
 
 int main(void)
 {
@@ -302,10 +398,12 @@ int main(void)
  * example, the app is requesting memory of size 256MB that is backed by
  * huge pages.
  *
- * For ia64 architecture, Linux kernel reserves Region number 4 for huge pages.
- * That means the addresses starting with 0x800000... will need to be
- * specified.  Specifying a fixed address is not required on ppc64, i386
- * or x86_64.
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages.  That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required.  If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
  */
 #include <stdlib.h>
 #include <stdio.h>
@@ -317,14 +415,8 @@ int main(void)
 #define LENGTH (256UL*1024*1024)
 #define PROTECTION (PROT_READ | PROT_WRITE)
 
-/* Only ia64 requires this */
-#ifdef __ia64__
-#define ADDR (void *)(0x8000000000000000UL)
-#define FLAGS (MAP_SHARED | MAP_FIXED)
-#else
-#define ADDR (void *)(0x0UL)
+#define ADDR (void *)(0x0UL)    /* let kernel choose address */
 #define FLAGS (MAP_SHARED)
-#endif
 
 void check_bytes(char *addr)
 {
diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt
index 262d8e6793a3..b392e496f816 100644
--- a/Documentation/vm/ksm.txt
+++ b/Documentation/vm/ksm.txt
@@ -16,9 +16,9 @@ by sharing the data common between them.  But it can be useful to any
 application which generates many instances of the same data.
 
 KSM only merges anonymous (private) pages, never pagecache (file) pages.
-KSM's merged pages are at present locked into kernel memory for as long
-as they are shared: so cannot be swapped out like the user pages they
-replace (but swapping KSM pages should follow soon in a later release).
+KSM's merged pages were originally locked into kernel memory, but can now
+be swapped out just like other user pages (but sharing is broken when they
+are swapped back in: ksmd must rediscover their identity and merge again).
 
 KSM only operates on those areas of address space which an application
 has advised to be likely candidates for merging, by using the madvise(2)
@@ -44,20 +44,12 @@ includes unmapped gaps (though working on the intervening mapped areas),
 and might fail with EAGAIN if not enough memory for internal structures.
 
 Applications should be considerate in their use of MADV_MERGEABLE,
-restricting its use to areas likely to benefit.  KSM's scans may use
-a lot of processing power, and its kernel-resident pages are a limited
-resource.  Some installations will disable KSM for these reasons.
+restricting its use to areas likely to benefit.  KSM's scans may use a lot
+of processing power: some installations will disable KSM for that reason.
 
 The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
-max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
-                   Value 0 imposes no limit on the kernel pages KSM may use;
-                   but note that any process using MADV_MERGEABLE can cause
-                   KSM to allocate these pages, unswappable until it exits.
-                   Default: quarter of memory (chosen to not pin too much)
-
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
                    e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
                    Default: 100 (chosen for demonstration purposes)
@@ -75,7 +67,7 @@ run              - set 0 to stop ksmd from running but keep merged pages,
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
-pages_shared     - how many shared unswappable kernel pages KSM is using
+pages_shared     - how many shared pages are being used
 pages_sharing    - how many more sites are sharing them i.e. how much saved
 pages_unshared   - how many pages unique but repeatedly checked for merging
 pages_volatile   - how many pages changing too fast to be placed in a tree
@@ -87,4 +79,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 24 Sept 2009
+Hugh Dickins, 17 Nov 2009
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index 3ec4f2a22585..7a7d9bab32ef 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -100,7 +100,7 @@
 #define BIT(name)               (1ULL << KPF_##name)
 #define BITS_COMPOUND           (BIT(COMPOUND_HEAD) | BIT(COMPOUND_TAIL))
 
-static char *page_flag_names[] = {
+static const char *page_flag_names[] = {
         [KPF_LOCKED]            = "L:locked",
         [KPF_ERROR]             = "E:error",
         [KPF_REFERENCED]        = "R:referenced",
@@ -173,7 +173,7 @@ static int		kpageflags_fd;
 static int              opt_hwpoison;
 static int              opt_unpoison;
 
-static char             *hwpoison_debug_fs = "/debug/hwpoison";
+static const char       hwpoison_debug_fs[] = "/debug/hwpoison";
 static int              hwpoison_inject_fd;
 static int              hwpoison_forget_fd;
 
@@ -218,7 +218,7 @@ static void fatal(const char *x, ...)
         exit(EXIT_FAILURE);
 }
 
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
 {
         int fd = open(pathname, flags);
 
@@ -301,7 +301,7 @@ static char *page_flag_name(uint64_t flags)
                 present = (flags >> i) & 1;
                 if (!page_flag_names[i]) {
                         if (present)
-                                fatal("unkown flag bit %d\n", i);
+                                fatal("unknown flag bit %d\n", i);
                         continue;
                 }
                 buf[j++] = present ? page_flag_names[i][0] : '_';
@@ -560,7 +560,7 @@ static void walk_pfn(unsigned long voffset,
 {
         uint64_t buf[KPAGEFLAGS_BATCH];
         unsigned long batch;
-        unsigned long pages;
+        long pages;
         unsigned long i;
 
         while (count) {
@@ -673,30 +673,35 @@ static void usage(void)
 
         printf(
 "page-types [options]\n"
-"            -r|--raw                  Raw mode, for kernel developers\n"
-"            -a|--addr    addr-spec    Walk a range of pages\n"
-"            -b|--bits    bits-spec    Walk pages with specified bits\n"
-"            -p|--pid     pid          Walk process address space\n"
+"            -r|--raw                   Raw mode, for kernel developers\n"
+"            -d|--describe flags        Describe flags\n"
+"            -a|--addr    addr-spec     Walk a range of pages\n"
+"            -b|--bits    bits-spec     Walk pages with specified bits\n"
+"            -p|--pid     pid           Walk process address space\n"
 #if 0 /* planned features */
-"            -f|--file    filename     Walk file address space\n"
+"            -f|--file    filename      Walk file address space\n"
 #endif
-"            -l|--list                 Show page details in ranges\n"
-"            -L|--list-each            Show page details one by one\n"
-"            -N|--no-summary           Don't show summay info\n"
-"            -X|--hwpoison             hwpoison pages\n"
-"            -x|--unpoison             unpoison pages\n"
-"            -h|--help                 Show this usage message\n"
+"            -l|--list                  Show page details in ranges\n"
+"            -L|--list-each             Show page details one by one\n"
+"            -N|--no-summary            Don't show summay info\n"
+"            -X|--hwpoison              hwpoison pages\n"
+"            -x|--unpoison              unpoison pages\n"
+"            -h|--help                  Show this usage message\n"
+"flags:\n"
+"            0x10                       bitfield format, e.g.\n"
+"            anon                       bit-name, e.g.\n"
+"            0x10,anon                  comma-separated list, e.g.\n"
 "addr-spec:\n"
-"            N                         one page at offset N (unit: pages)\n"
-"            N+M                       pages range from N to N+M-1\n"
-"            N,M                       pages range from N to M-1\n"
-"            N,                        pages range from N to end\n"
-"            ,M                        pages range from 0 to M-1\n"
+"            N                          one page at offset N (unit: pages)\n"
+"            N+M                        pages range from N to N+M-1\n"
+"            N,M                        pages range from N to M-1\n"
+"            N,                         pages range from N to end\n"
+"            ,M                         pages range from 0 to M-1\n"
 "bits-spec:\n"
-"            bit1,bit2                 (flags & (bit1|bit2)) != 0\n"
-"            bit1,bit2=bit1            (flags & (bit1|bit2)) == bit1\n"
-"            bit1,~bit2                (flags & (bit1|bit2)) == bit1\n"
-"            =bit1,bit2                flags == (bit1|bit2)\n"
+"            bit1,bit2                  (flags & (bit1|bit2)) != 0\n"
+"            bit1,bit2=bit1             (flags & (bit1|bit2)) == bit1\n"
+"            bit1,~bit2                 (flags & (bit1|bit2)) == bit1\n"
+"            =bit1,bit2                 flags == (bit1|bit2)\n"
 "bit-names:\n"
         );
 
@@ -884,13 +889,23 @@ static void parse_bits_mask(const char *optarg)
         add_bits_filter(mask, bits);
 }
 
+static void describe_flags(const char *optarg)
+{
+        uint64_t flags = parse_flag_names(optarg, 0);
 
-static struct option opts[] = {
+        printf("0x%016llx\t%s\t%s\n",
+                (unsigned long long)flags,
+                page_flag_name(flags),
+                page_flag_longname(flags));
+}
+
+static const struct option opts[] = {
         { "raw"       , 0, NULL, 'r' },
         { "pid"       , 1, NULL, 'p' },
         { "file"      , 1, NULL, 'f' },
         { "addr"      , 1, NULL, 'a' },
         { "bits"      , 1, NULL, 'b' },
+        { "describe"  , 1, NULL, 'd' },
         { "list"      , 0, NULL, 'l' },
         { "list-each" , 0, NULL, 'L' },
         { "no-summary", 0, NULL, 'N' },
@@ -907,7 +922,7 @@ int main(int argc, char *argv[])
         page_size = getpagesize();
 
         while ((c = getopt_long(argc, argv,
-                                "rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
+                                "rp:f:a:b:d:lLNXxh", opts, NULL)) != -1) {
                 switch (c) {
                 case 'r':
                         opt_raw = 1;
@@ -924,6 +939,9 @@ int main(int argc, char *argv[])
                 case 'b':
                         parse_bits_mask(optarg);
                         break;
+                case 'd':
+                        describe_flags(optarg);
+                        exit(0);
                 case 'l':
                         opt_list = 1;
                         break;
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 510917ff59ed..b37300edf27c 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -245,7 +245,7 @@ been overwritten. Here a string of 8 characters was written into a slab that
 has the length of 8 characters. However, a 8 character string needs a
 terminating 0. That zero has overwritten the first byte of the Redzone field.
 After reporting the details of the issue encountered the FIX SLUB message
-tell us that SLUB has restored the Redzone to its proper value and then
+tells us that SLUB has restored the Redzone to its proper value and then
 system operations continue.
 
 Emergency operations: