3 files changed, 274 insertions, 41 deletions

diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 0d5394920a31..74484e696405 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -32,9 +32,9 @@ Mailing list: linux-ext4@vger.kernel.org
     you will need to merge your changes with the version from e2fsprogs
     1.41.x.
 
-  - Create a new filesystem using the ext4dev filesystem type:
+  - Create a new filesystem using the ext4 filesystem type:
 
-        # mke2fs -t ext4dev /dev/hda1
+        # mke2fs -t ext4 /dev/hda1
 
     Or configure an existing ext3 filesystem to support extents and set
     the test_fs flag to indicate that it's ok for an in-development
@@ -47,13 +47,13 @@ Mailing list: linux-ext4@vger.kernel.org
 
         # tune2fs -I 256 /dev/hda1
 
-    (Note: we currently do not have tools to convert an ext4dev
+    (Note: we currently do not have tools to convert an ext4
     filesystem back to ext3; so please do not do try this on production
     filesystems.)
 
   - Mounting:
 
-        # mount -t ext4dev /dev/hda1 /wherever
+        # mount -t ext4 /dev/hda1 /wherever
 
   - When comparing performance with other filesystems, remember that
     ext3/4 by default offers higher data integrity guarantees than most.
@@ -177,6 +177,11 @@ barrier=<0|1(*)>	This enables/disables the use of write barriers in
                         your disks are battery-backed in one way or another,
                         disabling barriers may safely improve performance.
 
+inode_readahead=n       This tuning parameter controls the maximum
+                        number of inode table blocks that ext4's inode
+                        table readahead algorithm will pre-read into
+                        the buffer cache.  The default value is 32 blocks.
+
 orlov           (*)     This enables the new Orlov block allocator. It is
                         enabled by default.
 
@@ -252,6 +257,7 @@ stripe=n		Number of filesystem blocks that mballoc will try
 delalloc        (*)     Deferring block allocation until write-out time.
 nodelalloc              Disable delayed allocation. Blocks are allocation
                         when data is copied from user to page cache.
+
 Data Mode
 =========
 There are 3 different data modes:
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
new file mode 100644
index 000000000000..1e3defcfe50b
--- /dev/null
+++ b/Documentation/filesystems/fiemap.txt
@@ -0,0 +1,228 @@
+============
+Fiemap Ioctl
+============
+
+The fiemap ioctl is an efficient method for userspace to get file
+extent mappings. Instead of block-by-block mapping (such as bmap), fiemap
+returns a list of extents.
+
+
+Request Basics
+--------------
+
+A fiemap request is encoded within struct fiemap:
+
+struct fiemap {
+        __u64   fm_start;        /* logical offset (inclusive) at
+                                  * which to start mapping (in) */
+        __u64   fm_length;       /* logical length of mapping which
+                                  * userspace cares about (in) */
+        __u32   fm_flags;        /* FIEMAP_FLAG_* flags for request (in/out) */
+        __u32   fm_mapped_extents; /* number of extents that were
+                                    * mapped (out) */
+        __u32   fm_extent_count; /* size of fm_extents array (in) */
+        __u32   fm_reserved;
+        struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */
+};
+
+
+fm_start, and fm_length specify the logical range within the file
+which the process would like mappings for. Extents returned mirror
+those on disk - that is, the logical offset of the 1st returned extent
+may start before fm_start, and the range covered by the last returned
+extent may end after fm_length. All offsets and lengths are in bytes.
+
+Certain flags to modify the way in which mappings are looked up can be
+set in fm_flags. If the kernel doesn't understand some particular
+flags, it will return EBADR and the contents of fm_flags will contain
+the set of flags which caused the error. If the kernel is compatible
+with all flags passed, the contents of fm_flags will be unmodified.
+It is up to userspace to determine whether rejection of a particular
+flag is fatal to it's operation. This scheme is intended to allow the
+fiemap interface to grow in the future but without losing
+compatibility with old software.
+
+fm_extent_count specifies the number of elements in the fm_extents[] array
+that can be used to return extents.  If fm_extent_count is zero, then the
+fm_extents[] array is ignored (no extents will be returned), and the
+fm_mapped_extents count will hold the number of extents needed in
+fm_extents[] to hold the file's current mapping.  Note that there is
+nothing to prevent the file from changing between calls to FIEMAP.
+
+The following flags can be set in fm_flags:
+
+* FIEMAP_FLAG_SYNC
+If this flag is set, the kernel will sync the file before mapping extents.
+
+* FIEMAP_FLAG_XATTR
+If this flag is set, the extents returned will describe the inodes
+extended attribute lookup tree, instead of it's data tree.
+
+
+Extent Mapping
+--------------
+
+Extent information is returned within the embedded fm_extents array
+which userspace must allocate along with the fiemap structure. The
+number of elements in the fiemap_extents[] array should be passed via
+fm_extent_count. The number of extents mapped by kernel will be
+returned via fm_mapped_extents. If the number of fiemap_extents
+allocated is less than would be required to map the requested range,
+the maximum number of extents that can be mapped in the fm_extent[]
+array will be returned and fm_mapped_extents will be equal to
+fm_extent_count. In that case, the last extent in the array will not
+complete the requested range and will not have the FIEMAP_EXTENT_LAST
+flag set (see the next section on extent flags).
+
+Each extent is described by a single fiemap_extent structure as
+returned in fm_extents.
+
+struct fiemap_extent {
+        __u64   fe_logical;  /* logical offset in bytes for the start of
+                              * the extent */
+        __u64   fe_physical; /* physical offset in bytes for the start
+                              * of the extent */
+        __u64   fe_length;   /* length in bytes for the extent */
+        __u64   fe_reserved64[2];
+        __u32   fe_flags;    /* FIEMAP_EXTENT_* flags for this extent */
+        __u32   fe_reserved[3];
+};
+
+All offsets and lengths are in bytes and mirror those on disk.  It is valid
+for an extents logical offset to start before the request or it's logical
+length to extend past the request.  Unless FIEMAP_EXTENT_NOT_ALIGNED is
+returned, fe_logical, fe_physical, and fe_length will be aligned to the
+block size of the file system.  With the exception of extents flagged as
+FIEMAP_EXTENT_MERGED, adjacent extents will not be merged.
+
+The fe_flags field contains flags which describe the extent returned.
+A special flag, FIEMAP_EXTENT_LAST is always set on the last extent in
+the file so that the process making fiemap calls can determine when no
+more extents are available, without having to call the ioctl again.
+
+Some flags are intentionally vague and will always be set in the
+presence of other more specific flags. This way a program looking for
+a general property does not have to know all existing and future flags
+which imply that property.
+
+For example, if FIEMAP_EXTENT_DATA_INLINE or FIEMAP_EXTENT_DATA_TAIL
+are set, FIEMAP_EXTENT_NOT_ALIGNED will also be set. A program looking
+for inline or tail-packed data can key on the specific flag. Software
+which simply cares not to try operating on non-aligned extents
+however, can just key on FIEMAP_EXTENT_NOT_ALIGNED, and not have to
+worry about all present and future flags which might imply unaligned
+data. Note that the opposite is not true - it would be valid for
+FIEMAP_EXTENT_NOT_ALIGNED to appear alone.
+
+* FIEMAP_EXTENT_LAST
+This is the last extent in the file. A mapping attempt past this
+extent will return nothing.
+
+* FIEMAP_EXTENT_UNKNOWN
+The location of this extent is currently unknown. This may indicate
+the data is stored on an inaccessible volume or that no storage has
+been allocated for the file yet.
+
+* FIEMAP_EXTENT_DELALLOC
+  - This will also set FIEMAP_EXTENT_UNKNOWN.
+Delayed allocation - while there is data for this extent, it's
+physical location has not been allocated yet.
+
+* FIEMAP_EXTENT_ENCODED
+This extent does not consist of plain filesystem blocks but is
+encoded (e.g. encrypted or compressed).  Reading the data in this
+extent via I/O to the block device will have undefined results.
+
+Note that it is *always* undefined to try to update the data
+in-place by writing to the indicated location without the
+assistance of the filesystem, or to access the data using the
+information returned by the FIEMAP interface while the filesystem
+is mounted.  In other words, user applications may only read the
+extent data via I/O to the block device while the filesystem is
+unmounted, and then only if the FIEMAP_EXTENT_ENCODED flag is
+clear; user applications must not try reading or writing to the
+filesystem via the block device under any other circumstances.
+
+* FIEMAP_EXTENT_DATA_ENCRYPTED
+  - This will also set FIEMAP_EXTENT_ENCODED
+The data in this extent has been encrypted by the file system.
+
+* FIEMAP_EXTENT_NOT_ALIGNED
+Extent offsets and length are not guaranteed to be block aligned.
+
+* FIEMAP_EXTENT_DATA_INLINE
+  This will also set FIEMAP_EXTENT_NOT_ALIGNED
+Data is located within a meta data block.
+
+* FIEMAP_EXTENT_DATA_TAIL
+  This will also set FIEMAP_EXTENT_NOT_ALIGNED
+Data is packed into a block with data from other files.
+
+* FIEMAP_EXTENT_UNWRITTEN
+Unwritten extent - the extent is allocated but it's data has not been
+initialized.  This indicates the extent's data will be all zero if read
+through the filesystem but the contents are undefined if read directly from
+the device.
+
+* FIEMAP_EXTENT_MERGED
+This will be set when a file does not support extents, i.e., it uses a block
+based addressing scheme.  Since returning an extent for each block back to
+userspace would be highly inefficient, the kernel will try to merge most
+adjacent blocks into 'extents'.
+
+
+VFS -> File System Implementation
+---------------------------------
+
+File systems wishing to support fiemap must implement a ->fiemap callback on
+their inode_operations structure. The fs ->fiemap call is responsible for
+defining it's set of supported fiemap flags, and calling a helper function on
+each discovered extent:
+
+struct inode_operations {
+       ...
+
+       int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start,
+                     u64 len);
+
+->fiemap is passed struct fiemap_extent_info which describes the
+fiemap request:
+
+struct fiemap_extent_info {
+        unsigned int fi_flags;          /* Flags as passed from user */
+        unsigned int fi_extents_mapped; /* Number of mapped extents */
+        unsigned int fi_extents_max;    /* Size of fiemap_extent array */
+        struct fiemap_extent *fi_extents_start; /* Start of fiemap_extent array */
+};
+
+It is intended that the file system should not need to access any of this
+structure directly.
+
+
+Flag checking should be done at the beginning of the ->fiemap callback via the
+fiemap_check_flags() helper:
+
+int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags);
+
+The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The
+set of fiemap flags which the fs understands should be passed via fs_flags. If
+fiemap_check_flags finds invalid user flags, it will place the bad values in
+fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from
+fiemap_check_flags(), it should immediately exit, returning that error back to
+ioctl_fiemap().
+
+
+For each extent in the request range, the file system should call
+the helper function, fiemap_fill_next_extent():
+
+int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical,
+                            u64 phys, u64 len, u32 flags, u32 dev);
+
+fiemap_fill_next_extent() will use the passed values to populate the
+next free extent in the fm_extents array. 'General' extent flags will
+automatically be set from specific flags on behalf of the calling file
+system so that the userspace API is not broken.
+
+fiemap_fill_next_extent() returns 0 on success, and 1 when the
+user-supplied fm_extents array is full. If an error is encountered
+while copying the extent to user memory, -EFAULT will be returned.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index f566ad9bcb7b..d831d24d2a6c 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -923,45 +923,44 @@ CPUs.
 The   "procs_blocked" line gives  the  number of  processes currently blocked,
 waiting for I/O to complete.
 
+
 1.9 Ext4 file system parameters
 ------------------------------
-Ext4 file system have one directory per partition under /proc/fs/ext4/
-# ls /proc/fs/ext4/hdc/
-group_prealloc  max_to_scan  mb_groups  mb_history  min_to_scan  order2_req
-stats  stream_req
-
-mb_groups:
-This file gives the details of multiblock allocator buddy cache of free blocks
-
-mb_history:
-Multiblock allocation history.
-
-stats:
-This file indicate whether the multiblock allocator should start collecting
-statistics. The statistics are shown during unmount
-
-group_prealloc:
-The multiblock allocator normalize the block allocation request to
-group_prealloc filesystem blocks if we don't have strip value set.
-The stripe value can be specified at mount time or during mke2fs.
-
-max_to_scan:
-How long multiblock allocator can look for a best extent (in found extents)
-
-min_to_scan:
-How long multiblock allocator  must look for a best extent
-
-order2_req:
-Multiblock allocator use  2^N search using buddies only for requests greater
-than or equal to order2_req. The request size is specfied in file system
-blocks. A value of 2 indicate only if the requests are greater than or equal
-to 4 blocks.
-
-stream_req:
-Files smaller than stream_req are served by the stream allocator, whose
-purpose is to pack requests as close each to other as possible to
-produce smooth I/O traffic. Avalue of 16 indicate that file smaller than 16
-filesystem block size will use group based preallocation.
+
+Information about mounted ext4 file systems can be found in
+/proc/fs/ext4.  Each mounted filesystem will have a directory in
+/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
+/proc/fs/ext4/dm-0).   The files in each per-device directory are shown
+in Table 1-10, below.
+
+Table 1-10: Files in /proc/fs/ext4/<devname>
+..............................................................................
+ File            Content                                        
+ mb_groups       details of multiblock allocator buddy cache of free blocks
+ mb_history      multiblock allocation history
+ stats           controls whether the multiblock allocator should start
+                 collecting statistics, which are shown during the unmount
+ group_prealloc  the multiblock allocator will round up allocation
+                 requests to a multiple of this tuning parameter if the
+                 stripe size is not set in the ext4 superblock
+ max_to_scan     The maximum number of extents the multiblock allocator
+                 will search to find the best extent
+ min_to_scan     The minimum number of extents the multiblock allocator
+                 will search to find the best extent
+ order2_req      Tuning parameter which controls the minimum size for 
+                 requests (as a power of 2) where the buddy cache is
+                 used
+ stream_req      Files which have fewer blocks than this tunable
+                 parameter will have their blocks allocated out of a
+                 block group specific preallocation pool, so that small
+                 files are packed closely together.  Each large file
+                 will have its blocks allocated out of its own unique
+                 preallocation pool.
+inode_readahead  Tuning parameter which controls the maximum number of
+                 inode table blocks that ext4's inode table readahead
+                 algorithm will pre-read into the buffer cache
+..............................................................................
+
 
 ------------------------------------------------------------------------------
 Summary