29 files changed, 171 insertions, 134 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 1d1b34500b69..1615350b7b53 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -102,6 +102,13 @@ C-procfs-example = procfs_example.xml
 C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
 $(obj)/procfs-guide.xml: $(C-procfs-example2)
 
+# List of programs to build
+##oops, this is a kernel module::hostprogs-y := procfs_example
+obj-m += procfs_example.o
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
 notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
                    exit 1
 db2xtemplate = db2TYPE -o $(dir $@) $<
diff --git a/Documentation/DocBook/procfs_example.c b/Documentation/DocBook/procfs_example.c
index 7064084c1c5e..2f3de0fb8365 100644
--- a/Documentation/DocBook/procfs_example.c
+++ b/Documentation/DocBook/procfs_example.c
@@ -189,8 +189,6 @@ static int __init init_procfs_example(void)
         return 0;
 
 no_symlink:
-        remove_proc_entry("tty", example_dir);
-no_tty:
         remove_proc_entry("bar", example_dir);
 no_bar:
         remove_proc_entry("foo", example_dir);
@@ -206,7 +204,6 @@ out:
 static void __exit cleanup_procfs_example(void)
 {
         remove_proc_entry("jiffies_too", example_dir);
-        remove_proc_entry("tty", example_dir);
         remove_proc_entry("bar", example_dir);
         remove_proc_entry("foo", example_dir);
         remove_proc_entry("jiffies", example_dir);
@@ -222,3 +219,4 @@ module_exit(cleanup_procfs_example);
 
 MODULE_AUTHOR("Erik Mouw");
 MODULE_DESCRIPTION("procfs examples");
+MODULE_LICENSE("GPL");
diff --git a/Documentation/Makefile b/Documentation/Makefile
new file mode 100644
index 000000000000..94b945733534
--- /dev/null
+++ b/Documentation/Makefile
@@ -0,0 +1,3 @@
+obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
+        filesystems/configfs/ ia64/ networking/ \
+        pcmcia/ spi/ video4linux/ vm/ watchdog/src/
diff --git a/Documentation/accounting/Makefile b/Documentation/accounting/Makefile
new file mode 100644
index 000000000000..31929eb875b1
--- /dev/null
+++ b/Documentation/accounting/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := getdelays
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 3f7755f3963f..cc49400b4af8 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -201,13 +201,19 @@ void print_delayacct(struct taskstats *t)
                "RECLAIM  %12s%15s\n"
                "      %15llu%15llu\n",
                "count", "real total", "virtual total", "delay total",
-               t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
-               t->cpu_delay_total,
+               (unsigned long long)t->cpu_count,
+               (unsigned long long)t->cpu_run_real_total,
+               (unsigned long long)t->cpu_run_virtual_total,
+               (unsigned long long)t->cpu_delay_total,
                "count", "delay total",
-               t->blkio_count, t->blkio_delay_total,
-               "count", "delay total", t->swapin_count, t->swapin_delay_total,
+               (unsigned long long)t->blkio_count,
+               (unsigned long long)t->blkio_delay_total,
                "count", "delay total",
-               t->freepages_count, t->freepages_delay_total);
+               (unsigned long long)t->swapin_count,
+               (unsigned long long)t->swapin_delay_total,
+               "count", "delay total",
+               (unsigned long long)t->freepages_count,
+               (unsigned long long)t->freepages_delay_total);
 }
 
 void task_context_switch_counts(struct taskstats *t)
@@ -215,14 +221,17 @@ void task_context_switch_counts(struct taskstats *t)
         printf("\n\nTask   %15s%15s\n"
                "       %15llu%15llu\n",
                "voluntary", "nonvoluntary",
-               t->nvcsw, t->nivcsw);
+               (unsigned long long)t->nvcsw, (unsigned long long)t->nivcsw);
 }
 
 void print_cgroupstats(struct cgroupstats *c)
 {
         printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
-                "uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
-                c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+                "uninterruptible %llu\n", (unsigned long long)c->nr_sleeping,
+                (unsigned long long)c->nr_io_wait,
+                (unsigned long long)c->nr_running,
+                (unsigned long long)c->nr_stopped,
+                (unsigned long long)c->nr_uninterruptible);
 }
 
 
diff --git a/Documentation/auxdisplay/Makefile b/Documentation/auxdisplay/Makefile
new file mode 100644
index 000000000000..51fe23332c81
--- /dev/null
+++ b/Documentation/auxdisplay/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := cfag12864b-example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include
diff --git a/Documentation/connector/Makefile b/Documentation/connector/Makefile
new file mode 100644
index 000000000000..8df1a7285a06
--- /dev/null
+++ b/Documentation/connector/Makefile
@@ -0,0 +1,11 @@
+ifneq ($(CONFIG_CONNECTOR),)
+obj-m += cn_test.o
+endif
+
+# List of programs to build
+hostprogs-y := ucon
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index ba0aacde94fb..94bbc27ddd4f 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -59,15 +59,10 @@ apicid values in those tables for disabled apics. In the event BIOS doesn't
 mark such hot-pluggable cpus as disabled entries, one could use this
 parameter "additional_cpus=x" to represent those cpus in the cpu_possible_map.
 
-s390 uses the number of cpus it detects at IPL time to also the number of bits
-in cpu_possible_map. If it is desired to add additional cpus at a later time
-the number should be specified using this option or the possible_cpus option.
-
 possible_cpus=n         [s390 only] use this to set hotpluggable cpus.
                         This option sets possible_cpus bits in
                         cpu_possible_map. Thus keeping the numbers of bits set
                         constant even if the machine gets rebooted.
-                        This option overrides additional_cpus.
 
 CPU maps and such
 -----------------
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index e6244cde26e9..05c80645e4ee 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -2560,9 +2560,6 @@ Your cooperation is appreciated.
                  96 = /dev/usb/hiddev0  1st USB HID device
                     ...
                 111 = /dev/usb/hiddev15 16th USB HID device
-                112 = /dev/usb/auer0    1st auerswald ISDN device
-                    ...
-                127 = /dev/usb/auer15   16th auerswald ISDN device
                 128 = /dev/usb/brlvgr0  First Braille Voyager device
                     ...
                 131 = /dev/usb/brlvgr3  Fourth Braille Voyager device
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c23955404bf5..eb1a47b97427 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -19,15 +19,6 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:   old NCR53C9x driver
-When:   October 2007
-Why:    Replaced by the much better esp_scsi driver.  Actual low-level
-        driver can be ported over almost trivially.
-Who:    David Miller <davem@davemloft.net>
-        Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:   Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:   December 2008
 Files:  include/linux/video_decoder.h include/linux/videodev.h
@@ -205,19 +196,6 @@ Who:  Tejun Heo <htejun@gmail.com>
 
 ---------------------------
 
-What: The arch/ppc and include/asm-ppc directories
-When: Jun 2008
-Why:  The arch/powerpc tree is the merged architecture for ppc32 and ppc64
-      platforms.  Currently there are efforts underway to port the remaining
-      arch/ppc platforms to the merged tree.  New submissions to the arch/ppc
-      tree have been frozen with the 2.6.22 kernel release and that tree will
-      remain in bug-fix only mode until its scheduled removal.  Platforms
-      that are not ported by June 2008 will be removed due to the lack of an
-      interested maintainer.
-Who:  linuxppc-dev@ozlabs.org
-
----------------------------
-
 What:   i386/x86_64 bzImage symlinks
 When:   April 2010
 
diff --git a/Documentation/filesystems/configfs/Makefile b/Documentation/filesystems/configfs/Makefile
new file mode 100644
index 000000000000..be7ec5e67dbc
--- /dev/null
+++ b/Documentation/filesystems/configfs/Makefile
@@ -0,0 +1,3 @@
+ifneq ($(CONFIG_CONFIGFS_FS),)
+obj-m += configfs_example_explicit.o configfs_example_macros.o
+endif
diff --git a/Documentation/filesystems/quota.txt b/Documentation/filesystems/quota.txt
index a590c4093eff..5e8de25bf0f1 100644
--- a/Documentation/filesystems/quota.txt
+++ b/Documentation/filesystems/quota.txt
@@ -3,14 +3,14 @@ Quota subsystem
 ===============
 
 Quota subsystem allows system administrator to set limits on used space and
-number of used inodes (inode is a filesystem structure which is associated
-with each file or directory) for users and/or groups. For both used space and
-number of used inodes there are actually two limits. The first one is called
-softlimit and the second one hardlimit.  An user can never exceed a hardlimit
-for any resource. User is allowed to exceed softlimit but only for limited
-period of time. This period is called "grace period" or "grace time". When
-grace time is over, user is not able to allocate more space/inodes until he
-frees enough of them to get below softlimit.
+number of used inodes (inode is a filesystem structure which is associated with
+each file or directory) for users and/or groups. For both used space and number
+of used inodes there are actually two limits. The first one is called softlimit
+and the second one hardlimit.  An user can never exceed a hardlimit for any
+resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed
+softlimit but only for limited period of time. This period is called "grace
+period" or "grace time". When grace time is over, user is not able to allocate
+more space/inodes until he frees enough of them to get below softlimit.
 
 Quota limits (and amount of grace time) are set independently for each
 filesystem.
@@ -53,6 +53,12 @@ in parentheses):
                 QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded
                   longer than given grace period.
                 QUOTA_NL_BSOFTWARN - space (block) softlimit
+          - four warnings are also defined for the event when user stops
+            exceeding some limit:
+                QUOTA_NL_IHARDBELOW - inode hardlimit
+                QUOTA_NL_ISOFTBELOW - inode softlimit
+                QUOTA_NL_BHARDBELOW - space (block) hardlimit
+                QUOTA_NL_BSOFTBELOW - space (block) softlimit
         QUOTA_NL_A_DEV_MAJOR (u32)
           - major number of a device with the affected filesystem
         QUOTA_NL_A_DEV_MINOR (u32)
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt
index 540e9e7f59c5..6a0d70a22f05 100644
--- a/Documentation/filesystems/ubifs.txt
+++ b/Documentation/filesystems/ubifs.txt
@@ -57,7 +57,7 @@ Similarly to JFFS2, UBIFS supports on-the-flight compression which makes
 it possible to fit quite a lot of data to the flash.
 
 Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
-It does not need stuff like ckfs.ext2. UBIFS automatically replays its
+It does not need stuff like fsck.ext2. UBIFS automatically replays its
 journal and recovers from crashes, ensuring that the on-flash data
 structures are consistent.
 
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
index 2fefaf582a43..e98bdfea3467 100644
--- a/Documentation/hwmon/ibmaem
+++ b/Documentation/hwmon/ibmaem
@@ -1,8 +1,11 @@
 Kernel driver ibmaem
 ======================
 
+This driver talks to the IBM Systems Director Active Energy Manager, known
+henceforth as AEM.
+
 Supported systems:
-  * Any recent IBM System X server with Active Energy Manager support.
+  * Any recent IBM System X server with AEM support.
     This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
     x3950 M2, and certain HS2x/LS2x/QS2x blades.  The IPMI host interface
     driver ("ipmi-si") needs to be loaded for this driver to do anything.
@@ -14,24 +17,22 @@ Author: Darrick J. Wong
 Description
 -----------
 
-This driver implements sensor reading support for the energy and power
-meters available on various IBM System X hardware through the BMC.  All
-sensor banks will be exported as platform devices; this driver can talk
-to both v1 and v2 interfaces.  This driver is completely separate from the
-older ibmpex driver.
+This driver implements sensor reading support for the energy and power meters
+available on various IBM System X hardware through the BMC.  All sensor banks
+will be exported as platform devices; this driver can talk to both v1 and v2
+interfaces.  This driver is completely separate from the older ibmpex driver.
 
-The v1 AEM interface has a simple set of features to monitor energy use.
-There is a register that displays an estimate of raw energy consumption
-since the last BMC reset, and a power sensor that returns average power
-use over a configurable interval.
+The v1 AEM interface has a simple set of features to monitor energy use.  There
+is a register that displays an estimate of raw energy consumption since the
+last BMC reset, and a power sensor that returns average power use over a
+configurable interval.
 
-The v2 AEM interface is a bit more sophisticated, being able to present
-a wider range of energy and power use registers, the power cap as
-set by the AEM software, and temperature sensors.
+The v2 AEM interface is a bit more sophisticated, being able to present a wider
+range of energy and power use registers, the power cap as set by the AEM
+software, and temperature sensors.
 
 Special Features
 ----------------
 
-The "power_cap" value displays the current system power cap, as set by
-the Active Energy Manager software.  Setting the power cap from the host
-is not currently supported.
+The "power_cap" value displays the current system power cap, as set by the AEM
+software.  Setting the power cap from the host is not currently supported.
diff --git a/Documentation/ia64/Makefile b/Documentation/ia64/Makefile
new file mode 100644
index 000000000000..b75db69ec483
--- /dev/null
+++ b/Documentation/ia64/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := aliasing-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index 3bb5f466a90d..1c6b545635a2 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -105,7 +105,6 @@ Code	Seq#	Include File		Comments
 'T'     all     linux/soundcard.h       conflict!
 'T'     all     asm-i386/ioctls.h       conflict!
 'U'     00-EF   linux/drivers/usb/usb.h
-'U'     F0-FF   drivers/usb/auerswald.c
 'V'     all     linux/vt.h
 'W'     00-1F   linux/watchdog.h        conflict!
 'W'     00-1F   linux/wanrouter.h       conflict!
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index b88b0ea54e90..655414821edc 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1447,21 +1447,6 @@ static void configure_device(int fd, const char *tapif, u32 ipaddr)
                 err(1, "Bringing interface %s up", tapif);
 }
 
-static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
-{
-        struct ifreq ifr;
-
-        memset(&ifr, 0, sizeof(ifr));
-        strcpy(ifr.ifr_name, tapif);
-
-        /* SIOC stands for Socket I/O Control.  G means Get (vs S for Set
-         * above).  IF means Interface, and HWADDR is hardware address.
-         * Simple! */
-        if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
-                err(1, "getting hw address for %s", tapif);
-        memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
-}
-
 static int get_tun_device(char tapif[IFNAMSIZ])
 {
         struct ifreq ifr;
@@ -1531,11 +1516,8 @@ static void setup_tun_net(char *arg)
         p = strchr(arg, ':');
         if (p) {
                 str2mac(p+1, conf.mac);
+                add_feature(dev, VIRTIO_NET_F_MAC);
                 *p = '\0';
-        } else {
-                p = arg + strlen(arg);
-                /* None supplied; query the randomly assigned mac. */
-                get_mac(ipfd, tapif, conf.mac);
         }
 
         /* arg is now either an IP address or a bridge name */
@@ -1547,13 +1529,10 @@ static void setup_tun_net(char *arg)
         /* Set up the tun device. */
         configure_device(ipfd, tapif, ip);
 
-        /* Tell Guest what MAC address to use. */
-        add_feature(dev, VIRTIO_NET_F_MAC);
         add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
         /* Expect Guest to handle everything except UFO */
         add_feature(dev, VIRTIO_NET_F_CSUM);
         add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
-        add_feature(dev, VIRTIO_NET_F_MAC);
         add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
         add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
         add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
new file mode 100644
index 000000000000..6d8af1ac56c4
--- /dev/null
+++ b/Documentation/networking/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := ifenslave
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index a12059886755..1b96ccda3836 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -1081,7 +1081,7 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
 
                 }
 
-                ipaddr = ifr.ifr_addr.sa_data;
+                ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
                 v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
                         slave_ifname, ifra[i].desc,
                         ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);
diff --git a/Documentation/pcmcia/Makefile b/Documentation/pcmcia/Makefile
new file mode 100644
index 000000000000..accde871ae77
--- /dev/null
+++ b/Documentation/pcmcia/Makefile
@@ -0,0 +1,10 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := crc32hash
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include
diff --git a/Documentation/pcmcia/crc32hash.c b/Documentation/pcmcia/crc32hash.c
index cbc36d299af8..4210e5abab8a 100644
--- a/Documentation/pcmcia/crc32hash.c
+++ b/Documentation/pcmcia/crc32hash.c
@@ -26,7 +26,7 @@ int main(int argc, char **argv) {
                 printf("no string passed as argument\n");
                 return -1;
         }
-        result = crc32(argv[1], strlen(argv[1]));
+        result = crc32((unsigned char const *)argv[1], strlen(argv[1]));
         printf("0x%x\n", result);
         return 0;
 }
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 6f6d117ac7e2..b117e42a6166 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1144,8 +1144,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-ice1712
   ------------------
 
@@ -1628,8 +1626,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-pcsp
   -----------------
 
@@ -2081,13 +2077,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-virtuoso
   -------------------
 
-    Module for sound cards based on the Asus AV200 chip, i.e.,
-    Xonar D2 and Xonar D2X.
+    Module for sound cards based on the Asus AV100/AV200 chips,
+    i.e., Xonar D1, DX, D2 and D2X.
 
     This module supports autoprobe and multiple cards.
 
-    Power management is _not_ supported.
-
   Module snd-vx222
   ----------------
 
diff --git a/Documentation/spi/Makefile b/Documentation/spi/Makefile
new file mode 100644
index 000000000000..a5b03c88beae
--- /dev/null
+++ b/Documentation/spi/Makefile
@@ -0,0 +1,11 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := spidev_test spidev_fdx
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_spidev_test.o += -I$(objtree)/usr/include
+HOSTCFLAGS_spidev_fdx.o += -I$(objtree)/usr/include
diff --git a/Documentation/usb/auerswald.txt b/Documentation/usb/auerswald.txt
deleted file mode 100644
index 7ee4d8f69116..000000000000
--- a/Documentation/usb/auerswald.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-                Auerswald USB kernel driver
-                ===========================
-
-What is it? What can I do with it?
-==================================
-The auerswald USB kernel driver connects your linux 2.4.x
-system to the auerswald usb-enabled devices.
-
-There are two types of auerswald usb devices:
-a) small PBX systems (ISDN)
-b) COMfort system telephones (ISDN)
-
-The driver installation creates the devices
-/dev/usb/auer0..15. These devices carry a vendor-
-specific protocol. You may run all auerswald java
-software on it. The java software needs a native
-library "libAuerUsbJNINative.so" installed on
-your system. This library is available from
-auerswald and shipped as part of the java software.
-
-You may create the devices with:
-        mknod -m 666 /dev/usb/auer0 c 180 112
-        ...
-        mknod -m 666 /dev/usb/auer15 c 180 127
-
-Future plans
-============
-- Connection to ISDN4LINUX (the hisax interface)
-
-The maintainer of this driver is wolfgang@iksw-muees.de
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index b2fc4d4a9917..9d31140e3f5b 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -436,7 +436,12 @@ post_reset; the USB core guarantees that this is true of internal
 suspend/resume events as well.
 
 If a driver wants to block all suspend/resume calls during some
-critical section, it can simply acquire udev->pm_mutex.
+critical section, it can simply acquire udev->pm_mutex. Note that
+calls to resume may be triggered indirectly. Block IO due to memory
+allocations can make the vm subsystem resume a device. Thus while
+holding this lock you must not allocate memory with GFP_KERNEL or
+GFP_NOFS.
+
 Alternatively, if the critical section might call some of the
 usb_autopm_* routines, the driver can avoid deadlock by doing:
 
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile
new file mode 100644
index 000000000000..1ed0e98d057d
--- /dev/null
+++ b/Documentation/video4linux/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := v4lgrab
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
new file mode 100644
index 000000000000..6f562f778b28
--- /dev/null
+++ b/Documentation/vm/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := slabinfo
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration
index 99f89aa10169..d5fdfd34bbaf 100644
--- a/Documentation/vm/page_migration
+++ b/Documentation/vm/page_migration
@@ -18,10 +18,11 @@ migrate_pages function call takes two sets of nodes and moves pages of a
 process that are located on the from nodes to the destination nodes.
 Page migration functions are provided by the numactl package by Andi Kleen
 (a version later than 0.9.3 is required. Get it from
-ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
-provides an interface similar to other numa functionality for page migration.
-cat /proc/<pid>/numa_maps allows an easy review of where the pages of
-a process are located. See also the numa_maps manpage in the numactl package.
+ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma
+which provides an interface similar to other numa functionality for page
+migration.  cat /proc/<pid>/numa_maps allows an easy review of where the
+pages of a process are located. See also the numa_maps documentation in the
+proc(5) man page.
 
 Manual migration is useful if for example the scheduler has relocated
 a process to a processor on a distant node. A batch scheduler or an
diff --git a/Documentation/watchdog/src/Makefile b/Documentation/watchdog/src/Makefile
new file mode 100644
index 000000000000..40e5f46e4740
--- /dev/null
+++ b/Documentation/watchdog/src/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := watchdog-simple watchdog-test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)