aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/powerpc/booting-without-of.txt60
1 files changed, 59 insertions, 1 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 54e5f9b1536d..d02c64953dcd 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -44,7 +44,6 @@
44 compiler and the textural representation of 44 compiler and the textural representation of
45 the tree that can be "compiled" by dtc. 45 the tree that can be "compiled" by dtc.
46 46
47
48 November 21, 2005: Rev 0.5 47 November 21, 2005: Rev 0.5
49 - Additions/generalizations for 32-bit 48 - Additions/generalizations for 32-bit
50 - Changed to reflect the new arch/powerpc 49 - Changed to reflect the new arch/powerpc
@@ -1307,6 +1306,65 @@ platforms are moved over to use the flattened-device-tree model.
1307 }; 1306 };
1308 1307
1309 1308
1309 f) Freescale SOC USB controllers
1310
1311 The device node for a USB controller that is part of a Freescale
1312 SOC is as described in the document "Open Firmware Recommended
1313 Practice : Universal Serial Bus" with the following modifications
1314 and additions :
1315
1316 Required properties :
1317 - compatible : Should be "fsl-usb2-mph" for multi port host usb
1318 controllers, or "fsl-usb2-dr" for dual role usb controllers
1319 - phy_type : For multi port host usb controllers, should be one of
1320 "ulpi", or "serial". For dual role usb controllers, should be
1321 one of "ulpi", "utmi", "utmi_wide", or "serial".
1322 - reg : Offset and length of the register set for the device
1323 - port0 : boolean; if defined, indicates port0 is connected for
1324 fsl-usb2-mph compatible controllers. Either this property or
1325 "port1" (or both) must be defined for "fsl-usb2-mph" compatible
1326 controllers.
1327 - port1 : boolean; if defined, indicates port1 is connected for
1328 fsl-usb2-mph compatible controllers. Either this property or
1329 "port0" (or both) must be defined for "fsl-usb2-mph" compatible
1330 controllers.
1331
1332 Recommended properties :
1333 - interrupts : <a b> where a is the interrupt number and b is a
1334 field that represents an encoding of the sense and level
1335 information for the interrupt. This should be encoded based on
1336 the information in section 2) depending on the type of interrupt
1337 controller you have.
1338 - interrupt-parent : the phandle for the interrupt controller that
1339 services interrupts for this device.
1340
1341 Example multi port host usb controller device node :
1342 usb@22000 {
1343 device_type = "usb";
1344 compatible = "fsl-usb2-mph";
1345 reg = <22000 1000>;
1346 #address-cells = <1>;
1347 #size-cells = <0>;
1348 interrupt-parent = <700>;
1349 interrupts = <27 1>;
1350 phy_type = "ulpi";
1351 port0;
1352 port1;
1353 };
1354
1355 Example dual role usb controller device node :
1356 usb@23000 {
1357 device_type = "usb";
1358 compatible = "fsl-usb2-dr";
1359 reg = <23000 1000>;
1360 #address-cells = <1>;
1361 #size-cells = <0>;
1362 interrupt-parent = <700>;
1363 interrupts = <26 1>;
1364 phy = "ulpi";
1365 };
1366
1367
1310 More devices will be defined as this spec matures. 1368 More devices will be defined as this spec matures.
1311 1369
1312 1370