24 files changed, 343 insertions, 156 deletions

diff --git a/Documentation/Changes b/Documentation/Changes
index 27232be26e1a..783ddc3ce4e8 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -65,7 +65,7 @@ o  isdn4k-utils           3.1pre1                 # isdnctrl 2>&1|grep version
 o  nfs-utils              1.0.5                   # showmount --version
 o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
-o  udev                   058                     # udevinfo -V
+o  udev                   071                     # udevinfo -V
 
 Kernel compilation
 ==================
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index d650ce36485f..4d9b66d8b4db 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -286,7 +286,9 @@ X!Edrivers/pci/search.c
  -->
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
-!Edrivers/pci/hotplug.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Edrivers/pci/hotplug.c
+-->
 !Edrivers/pci/probe.c
 !Edrivers/pci/rom.c
      </sect1>
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
index 705c442c7bf4..15ce0f21e5e0 100644
--- a/Documentation/DocBook/usb.tmpl
+++ b/Documentation/DocBook/usb.tmpl
@@ -291,7 +291,7 @@
 
 !Edrivers/usb/core/hcd.c
 !Edrivers/usb/core/hcd-pci.c
-!Edrivers/usb/core/buffer.c
+!Idrivers/usb/core/buffer.c
     </chapter>
 
     <chapter>
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index 51f3bfb6fb6e..008a341234d0 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -345,8 +345,7 @@ if (!retval) {
   <programlisting>
 static inline void skel_delete (struct usb_skel *dev)
 {
-    if (dev->bulk_in_buffer != NULL)
-        kfree (dev->bulk_in_buffer);
+    kfree (dev->bulk_in_buffer);
     if (dev->bulk_out_buffer != NULL)
         usb_buffer_free (dev->udev, dev->bulk_out_size,
             dev->bulk_out_buffer,
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index e132fb1163b0..7eb715e07eda 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -49,9 +49,6 @@ changes occur:
         page table operations such as what happens during
         fork, and exec.
 
-        Platform developers note that generic code will always
-        invoke this interface without mm->page_table_lock held.
-
 3) void flush_tlb_range(struct vm_area_struct *vma,
                         unsigned long start, unsigned long end)
 
@@ -72,9 +69,6 @@ changes occur:
         call flush_tlb_page (see below) for each entry which may be
         modified.
 
-        Platform developers note that generic code will always
-        invoke this interface with mm->page_table_lock held.
-
 4) void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 
         This time we need to remove the PAGE_SIZE sized translation
@@ -93,9 +87,6 @@ changes occur:
 
         This is used primarily during fault processing.
 
-        Platform developers note that generic code will always
-        invoke this interface with mm->page_table_lock held.
-
 5) void flush_tlb_pgtables(struct mm_struct *mm,
                            unsigned long start, unsigned long end)
 
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index fabaca1ab1b0..59806c9761f7 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -14,8 +14,8 @@ struct device_driver {
         int     (*probe)        (struct device * dev);
         int     (*remove)       (struct device * dev);
 
-        int     (*suspend)      (struct device * dev, pm_message_t state, u32 level);
-        int     (*resume)       (struct device * dev, u32 level);
+        int     (*suspend)      (struct device * dev, pm_message_t state);
+        int     (*resume)       (struct device * dev);
 };
 
 
@@ -194,69 +194,13 @@ device; i.e. anything in the device's driver_data field.
 If the device is still present, it should quiesce the device and place
 it into a supported low-power state.
 
-        int     (*suspend)      (struct device * dev, pm_message_t state, u32 level);
+        int     (*suspend)      (struct device * dev, pm_message_t state);
 
-suspend is called to put the device in a low power state. There are
-several stages to successfully suspending a device, which is denoted in
-the @level parameter. Breaking the suspend transition into several
-stages affords the platform flexibility in performing device power
-management based on the requirements of the system and the
-user-defined policy.
+suspend is called to put the device in a low power state.
 
-SUSPEND_NOTIFY notifies the device that a suspend transition is about
-to happen. This happens on system power state transitions to verify
-that all devices can successfully suspend.
+        int     (*resume)       (struct device * dev);
 
-A driver may choose to fail on this call, which should cause the
-entire suspend transition to fail. A driver should fail only if it
-knows that the device will not be able to be resumed properly when the
-system wakes up again. It could also fail if it somehow determines it
-is in the middle of an operation too important to stop.
-
-SUSPEND_DISABLE tells the device to stop I/O transactions. When it
-stops transactions, or what it should do with unfinished transactions
-is a policy of the driver. After this call, the driver should not
-accept any other I/O requests.
-
-SUSPEND_SAVE_STATE tells the device to save the context of the
-hardware. This includes any bus-specific hardware state and
-device-specific hardware state. A pointer to this saved state can be
-stored in the device's saved_state field.
-
-SUSPEND_POWER_DOWN tells the driver to place the device in the low
-power state requested. 
-
-Whether suspend is called with a given level is a policy of the
-platform. Some levels may be omitted; drivers must not assume the
-reception of any level. However, all levels must be called in the
-order above; i.e. notification will always come before disabling;
-disabling the device will come before suspending the device.
-
-All calls are made with interrupts enabled, except for the
-SUSPEND_POWER_DOWN level.
-
-        int     (*resume)       (struct device * dev, u32 level);
-
-Resume is used to bring a device back from a low power state. Like the
-suspend transition, it happens in several stages. 
-
-RESUME_POWER_ON tells the driver to set the power state to the state
-before the suspend call (The device could have already been in a low
-power state before the suspend call to put in a lower power state). 
-
-RESUME_RESTORE_STATE tells the driver to restore the state saved by
-the SUSPEND_SAVE_STATE suspend call. 
-
-RESUME_ENABLE tells the driver to start accepting I/O transactions
-again. Depending on driver policy, the device may already have pending
-I/O requests. 
-
-RESUME_POWER_ON is called with interrupts disabled. The other resume
-levels are called with interrupts enabled. 
-
-As with the various suspend stages, the driver must not assume that
-any other resume calls have been or will be made. Each call should be
-self-contained and not dependent on any external state.
+Resume is used to bring a device back from a low power state.
 
 
 Attributes
diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt
index ff2fef2107f0..98b233cb8b36 100644
--- a/Documentation/driver-model/porting.txt
+++ b/Documentation/driver-model/porting.txt
@@ -350,7 +350,7 @@ When a driver is registered, the bus's list of devices is iterated
 over. bus->match() is called for each device that is not already
 claimed by a driver. 
 
-When a device is successfully bound to a device, device->driver is
+When a device is successfully bound to a driver, device->driver is
 set, the device is added to a per-driver list of devices, and a
 symlink is created in the driver's sysfs directory that points to the
 device's physical directory:
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 0d0195040d88..7f42e441c645 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -4,18 +4,18 @@ Kernel driver it87
 Supported chips:
   * IT8705F
     Prefix: 'it87'
-    Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+    Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
                http://www.ite.com.tw/
   * IT8712F
     Prefix: 'it8712'
     Addresses scanned: I2C 0x28 - 0x2f
-                       from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+                       from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
                http://www.ite.com.tw/
   * SiS950   [clone of IT8705F]
-    Prefix: 'sis950'
-    Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+    Prefix: 'it87'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: No longer be available
 
 Author: Christophe Gauthron <chrisg@0-in.com>
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 2c4cf39471f4..438cb24cee5b 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -24,14 +24,14 @@ Supported chips:
                http://www.national.com/pf/LM/LM86.html
   * Analog Devices ADM1032
     Prefix: 'adm1032'
-    Addresses scanned: I2C 0x4c
+    Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the Analog Devices website
-               http://products.analog.com/products/info.asp?product=ADM1032
+               http://www.analog.com/en/prod/0,2877,ADM1032,00.html
   * Analog Devices ADT7461
     Prefix: 'adt7461'
-    Addresses scanned: I2C 0x4c
+    Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the Analog Devices website
-               http://products.analog.com/products/info.asp?product=ADT7461
+               http://www.analog.com/en/prod/0,2877,ADT7461,00.html
     Note: Only if in ADM1032 compatibility mode
   * Maxim MAX6657
     Prefix: 'max6657'
@@ -71,8 +71,8 @@ increased resolution of the remote temperature measurement.
 
 The different chipsets of the family are not strictly identical, although
 very similar. This driver doesn't handle any specific feature for now,
-but could if there ever was a need for it. For reference, here comes a
-non-exhaustive list of specific features:
+with the exception of SMBus PEC. For reference, here comes a non-exhaustive
+list of specific features:
 
 LM90:
   * Filter and alert configuration register at 0xBF.
@@ -91,6 +91,7 @@ ADM1032:
   * Conversion averaging.
   * Up to 64 conversions/s.
   * ALERT is triggered by open remote sensor.
+  * SMBus PEC support for Write Byte and Receive Byte transactions.
 
 ADT7461
   * Extended temperature range (breaks compatibility)
@@ -119,3 +120,37 @@ The lm90 driver will not update its values more frequently than every
 other second; reading them more often will do no harm, but will return
 'old' values.
 
+PEC Support
+-----------
+
+The ADM1032 is the only chip of the family which supports PEC. It does
+not support PEC on all transactions though, so some care must be taken.
+
+When reading a register value, the PEC byte is computed and sent by the
+ADM1032 chip. However, in the case of a combined transaction (SMBus Read
+Byte), the ADM1032 computes the CRC value over only the second half of
+the message rather than its entirety, because it thinks the first half
+of the message belongs to a different transaction. As a result, the CRC
+value differs from what the SMBus master expects, and all reads fail.
+
+For this reason, the lm90 driver will enable PEC for the ADM1032 only if
+the bus supports the SMBus Send Byte and Receive Byte transaction types.
+These transactions will be used to read register values, instead of
+SMBus Read Byte, and PEC will work properly.
+
+Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
+Instead, it will try to write the PEC value to the register (because the
+SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
+without PEC), which is not what we want. Thus, PEC is explicitely disabled
+on SMBus Send Byte transactions in the lm90 driver.
+
+PEC on byte data transactions represents a significant increase in bandwidth
+usage (+33% for writes, +25% for reads) in normal conditions. With the need
+to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
+two transactions will typically mean twice as much delay waiting for
+transaction completion, effectively doubling the register cache refresh time.
+I guess reliability comes at a price, but it's quite expensive this time.
+
+So, as not everyone might enjoy the slowdown, PEC can be disabled through
+sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
+to that file to enable PEC again.
diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c96432..20682f15ae41 100644
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,7 @@ Kernel driver smsc47b397
 
 Supported chips:
   * SMSC LPC47B397-NC
+  * SMSC SCH5307-NS
     Prefix: 'smsc47b397'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: In this file
@@ -12,11 +13,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com>
 
 November 23, 2004
 
-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip
 (for which there is no public datasheet available). This document was
 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
 by Mark M. Hoffman <mhoffman@lightlink.com>.
 
+[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
+compatible.
+
 * * * * *
 
 Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@@ -127,7 +131,7 @@ OUT	DX,AL
 The registers of interest for identifying the SIO on the dc7100 are Device ID
 (0x20) and Device Rev  (0x21).
 
-The Device ID will read 0X6F
+The Device ID will read 0x6F (for SCH5307-NS, 0x81)
 The Device Rev currently reads 0x01
 
 Obtaining the HWM Base Address.
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 34e6478c1425..c15bbe68264e 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -12,6 +12,10 @@ Supported chips:
         http://www.smsc.com/main/datasheets/47m14x.pdf
         http://www.smsc.com/main/tools/discontinued/47m15x.pdf
         http://www.smsc.com/main/datasheets/47m192.pdf
+  * SMSC LPC47M997
+    Addresses scanned: none, address read from Super I/O config space
+    Prefix: 'smsc47m1'
+    Datasheet: none
 
 Authors:
         Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -30,6 +34,9 @@ The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
 in addition to the fan monitoring and control. The hardware monitoring
 block is not supported by the driver.
 
+No documentation is available for the 47M997, but it has the same device
+ID as the 47M15x and 47M192 chips and seems to be compatible.
+
 Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
 triggered if the rotation speed has dropped below a programmable limit. Fan
 readings can be divided by a programmable divider (1, 2, 4 or 8) to give
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 346400519d0d..764cdc5480e7 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -272,3 +272,6 @@ beep_mask	Bitmask for beep.
 
 eeprom          Raw EEPROM data in binary form.
                 Read only.
+
+pec             Enable or disable PEC (SMBus only)
+                Read/Write
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index b82014cb7c53..a936fb3824b2 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -18,8 +18,9 @@ Authors:
 Module Parameters
 -----------------
 
-force_addr=0xaddr       Set the I/O base address. Useful for Asus A7V boards
-                        that don't set the address in the BIOS. Does not do a
+force_addr=0xaddr       Set the I/O base address. Useful for boards that
+                        don't set the address in the BIOS. Look for a BIOS
+                        upgrade before resorting to this. Does not do a
                         PCI force; the via686a must still be present in lspci.
                         Don't use this unless the driver complains that the
                         base address is not set.
@@ -63,3 +64,15 @@ miss once-only alarms.
 
 The driver only updates its values each 1.5 seconds; reading it more often
 will do no harm, but will return 'old' values.
+
+Known Issues
+------------
+
+This driver handles sensors integrated in some VIA south bridges. It is
+possible that a motherboard maker used a VT82C686A/B chip as part of a
+product design but was not interested in its hardware monitoring features,
+in which case the sensor inputs will not be wired. This is the case of
+the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
+So, if you need the force_addr parameter, and end up with values which
+don't seem to make any sense, don't look any further: your chip is simply
+not wired for hardware monitoring.
diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810
index 0544eb332887..83c3b9743c3c 100644
--- a/Documentation/i2c/busses/i2c-i810
+++ b/Documentation/i2c/busses/i2c-i810
@@ -2,6 +2,7 @@ Kernel driver i2c-i810
 
 Supported adapters:
   * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
+  * Intel 82845G (GMCH)
 
 Authors: 
         Frodo Looijaard <frodol@dds.nl>, 
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 702f5ac68c09..9363b8bd6109 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -4,17 +4,18 @@ Supported adapters:
   * VIA Technologies, Inc. VT82C596A/B
     Datasheet: Sometimes available at the VIA website
 
-  * VIA Technologies, Inc. VT82C686A/B 
+  * VIA Technologies, Inc. VT82C686A/B
     Datasheet: Sometimes available at the VIA website
 
   * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
     Datasheet: available on request from Via
 
 Authors:
-        Frodo Looijaard <frodol@dds.nl>,  
-        Philip Edelbrock <phil@netroedge.com>, 
-        Kyösti Mälkki <kmalkki@cc.hut.fi>, 
-        Mark D. Studebaker <mdsxyz123@yahoo.com> 
+        Frodo Looijaard <frodol@dds.nl>,
+        Philip Edelbrock <phil@netroedge.com>,
+        Kyösti Mälkki <kmalkki@cc.hut.fi>,
+        Mark D. Studebaker <mdsxyz123@yahoo.com>,
+        Jean Delvare <khali@linux-fr.org>
 
 Module Parameters
 -----------------
@@ -28,20 +29,22 @@ Description
 -----------
 
 i2c-viapro is a true SMBus host driver for motherboards with one of the
-supported VIA southbridges.
+supported VIA south bridges.
 
 Your lspci -n listing must show one of these :
 
- device 1106:3050   (VT82C596 function 3)
- device 1106:3051   (VT82C596 function 3)
+ device 1106:3050   (VT82C596A function 3)
+ device 1106:3051   (VT82C596B function 3)
  device 1106:3057   (VT82C686 function 4)
  device 1106:3074   (VT8233)
  device 1106:3147   (VT8233A)
- device 1106:8235   (VT8231)
- devide 1106:3177   (VT8235)
- devide 1106:3227   (VT8237)
+ device 1106:8235   (VT8231 function 4)
+ device 1106:3177   (VT8235)
+ device 1106:3227   (VT8237R)
 
 If none of these show up, you should look in the BIOS for settings like
 enable ACPI / SMBus or even USB.
 
-
+Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
+VT8231), this driver supports I2C block transactions. Such transactions
+are mainly useful to read from and write to EEPROMs.
diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205
new file mode 100644
index 000000000000..09407c991fe5
--- /dev/null
+++ b/Documentation/i2c/chips/x1205
@@ -0,0 +1,38 @@
+Kernel driver x1205
+===================
+
+Supported chips:
+  * Xicor X1205 RTC
+    Prefix: 'x1205'
+    Addresses scanned: none
+    Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+
+Authors:
+        Karen Spearel <kas11@tampabay.rr.com>,
+        Alessandro Zummo <a.zummo@towertech.it>
+
+Description
+-----------
+
+This module aims to provide complete access to the Xicor X1205 RTC.
+Recently Xicor has merged with Intersil, but the chip is
+still sold under the Xicor brand.
+
+This chip is located at address 0x6f and uses a 2-byte register addressing.
+Two bytes need to be written to read a single register, while most
+other chips just require one and take the second one as the data
+to be written. To prevent corrupting unknown chips, the user must
+explicitely set the probe parameter.
+
+example:
+
+modprobe x1205 probe=0,0x6f
+
+The module supports one more option, hctosys, which is used to set the
+software clock from the x1205. On systems where the x1205 is the
+only hardware rtc, this parameter could be used to achieve a correct
+date/time earlier in the system boot sequence.
+
+example:
+
+modprobe x1205 probe=0,0x6f hctosys=1
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 41ffefbdc60c..60cca249e452 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -17,9 +17,10 @@ For the most up-to-date list of functionality constants, please check
   I2C_FUNC_I2C                    Plain i2c-level commands (Pure SMBus
                                   adapters typically can not do these)
   I2C_FUNC_10BIT_ADDR             Handles the 10-bit address extensions
-  I2C_FUNC_PROTOCOL_MANGLING      Knows about the I2C_M_REV_DIR_ADDR,
-                                  I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART
-                                  flags (which modify the i2c protocol!)
+  I2C_FUNC_PROTOCOL_MANGLING      Knows about the I2C_M_IGNORE_NAK,
+                                  I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and
+                                  I2C_M_NO_RD_ACK flags (which modify the
+                                  I2C protocol!)
   I2C_FUNC_SMBUS_QUICK            Handles the SMBus write_quick command
   I2C_FUNC_SMBUS_READ_BYTE        Handles the SMBus read_byte command
   I2C_FUNC_SMBUS_WRITE_BYTE       Handles the SMBus write_byte command
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index 4849dfd6961c..184fac2377aa 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -82,7 +82,7 @@ Technical changes:
   exit and exit_free. For i2c+isa drivers, labels should be named
   ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
   jumping to error labels. By the way, labels should be left-aligned.
-  Use memset to fill the client and data area with 0x00.
+  Use kzalloc instead of kmalloc.
   Use i2c_set_clientdata to set the client data (as opposed to
   a direct access to client->data).
   Use strlcpy instead of strcpy to copy the client name.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 077275722a7c..e94d9c6cc522 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -33,8 +33,8 @@ static struct i2c_driver foo_driver = {
         .command        = &foo_command /* may be NULL */
 }
  
-The name can be chosen freely, and may be upto 40 characters long. Please
-use something descriptive here.
+The name field must match the driver name, including the case. It must not
+contain spaces, and may be up to 31 characters long.
 
 Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
 means that your driver will be notified when new adapters are found.
@@ -43,9 +43,6 @@ This is almost always what you want.
 All other fields are for call-back functions which will be explained 
 below.
 
-There use to be two additional fields in this structure, inc_use et dec_use,
-for module usage count, but these fields were obsoleted and removed.
-
 
 Extra client data
 =================
@@ -58,6 +55,7 @@ be very useful.
 An example structure is below.
 
   struct foo_data {
+    struct i2c_client client;
     struct semaphore lock; /* For ISA access in `sensors' drivers. */
     int sysctl_id;         /* To keep the /proc directory entry for 
                               `sensors' drivers. */
@@ -310,22 +308,15 @@ For now, you can ignore the `flags' parameter. It is there for future use.
        client structure, even though we cannot fill it completely yet.
        But it allows us to access several i2c functions safely */
     
-    /* Note that we reserve some space for foo_data too. If you don't
-       need it, remove it. We do it here to help to lessen memory
-       fragmentation. */
-    if (! (new_client = kmalloc(sizeof(struct i2c_client) + 
-                                sizeof(struct foo_data),
-                                GFP_KERNEL))) {
+    if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
       err = -ENOMEM;
       goto ERROR0;
     }
 
-    /* This is tricky, but it will set the data to the right value. */
-    client->data = new_client + 1;
-    data = (struct foo_data *) (client->data);
+    new_client = &data->client;
+    i2c_set_clientdata(new_client, data);
 
     new_client->addr = address;
-    new_client->data = data;
     new_client->adapter = adapter;
     new_client->driver = &foo_driver;
     new_client->flags = 0;
@@ -451,7 +442,7 @@ much simpler than the attachment code, fortunately!
       release_region(client->addr,LM78_EXTENT);
     /* HYBRID SENSORS CHIP ONLY END */
 
-    kfree(client); /* Frees client data too, if allocated at the same time */
+    kfree(data);
     return 0;
   }
 
@@ -576,12 +567,12 @@ SMBus communication
   extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
                                         u8 command, u8 length,
                                         u8 *values);
+  extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+                                           u8 command, u8 *values);
 
 These ones were removed in Linux 2.6.10 because they had no users, but could
 be added back later if needed:
 
-  extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
-                                           u8 command, u8 *values);
   extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
                                        u8 command, u8 *values);
   extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt
index 85f095a7ad04..0962c5c948be 100644
--- a/Documentation/input/yealink.txt
+++ b/Documentation/input/yealink.txt
@@ -2,7 +2,6 @@ Driver documentation for yealink usb-p1k phones
 
 0. Status
 ~~~~~~~~~
-
 The p1k is a relatively cheap usb 1.1 phone with:
   - keyboard            full support, yealink.ko / input event API
   - LCD                 full support, yealink.ko / sysfs API
@@ -17,9 +16,8 @@ For vendor documentation see http://www.yealink.com
 
 1. Compilation (stand alone version)
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
 Currently only kernel 2.6.x.y versions are supported.
-In order to build the yealink.ko module do:
+In order to build the yealink.ko module do
 
   make
 
@@ -28,6 +26,21 @@ the Makefile is pointing to the location where your kernel sources
 are located, default /usr/src/linux.
 
 
+1.1 Troubleshooting
+~~~~~~~~~~~~~~~~~~~
+Q: Module yealink compiled and installed without any problem but phone
+   is not initialized and does not react to any actions.
+A: If you see something like:
+   hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone
+   in dmesg, it means that the hid driver has grabbed the device first. Try to
+   load module yealink before any other usb hid driver. Please see the
+   instructions provided by your distribution on module configuration.
+
+Q: Phone is working now (displays version and accepts keypad input) but I can't
+   find the sysfs files.
+A: The sysfs files are located on the particular usb endpoint. On most
+   distributions you can do: "find /sys/ -name get_icons" for a hint.
+
 
 2. keyboard features
 ~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 971589a9752d..5dffcfefc3c7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1460,8 +1460,6 @@ running once the system is up.
         stifb=          [HW]
                         Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
-        stram_swap=     [HW,M68k]
-
         swiotlb=        [IA-64] Number of I/O TLB slabs
 
         switches=       [HW,M68k]
@@ -1517,8 +1515,6 @@ running once the system is up.
         uart6850=       [HW,OSS]
                         Format: <io>,<irq>
 
-        usb-handoff     [HW] Enable early USB BIOS -> OS handoff
-
         usbhid.mousepoll=
                         [USBHID] The interval which mice are to be polled at.
 
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index e191baad8308..d5d3f064f552 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -626,7 +626,7 @@ ignored (others aren't affected).
     can be performed in optimal order. Not all SCSI devices support
     tagged queuing (:-().
 
-4.6 switches=
+4.5 switches=
 -------------
 
 Syntax: switches=<list of switches>
@@ -661,28 +661,6 @@ correctly.
 earlier initialization ("ov_"-less) takes precedence. But the
 switching-off on reset still happens in this case.
 
-4.5) stram_swap=
-----------------
-
-Syntax: stram_swap=<do_swap>[,<max_swap>]
-
-  This option is available only if the kernel has been compiled with
-CONFIG_STRAM_SWAP enabled. Normally, the kernel then determines
-dynamically whether to actually use ST-RAM as swap space. (Currently,
-the fraction of ST-RAM must be less or equal 1/3 of total memory to
-enable this swapping.) You can override the kernel's decision by
-specifying this option. 1 for <do_swap> means always enable the swap,
-even if you have less alternate RAM. 0 stands for never swap to
-ST-RAM, even if it's small enough compared to the rest of memory.
-
-  If ST-RAM swapping is enabled, the kernel usually uses all free
-ST-RAM as swap "device". If the kernel resides in ST-RAM, the region
-allocated by it is obviously never used for swapping :-) You can also
-limit this amount by specifying the second parameter, <max_swap>, if
-you want to use parts of ST-RAM as normal system memory. <max_swap> is
-in kBytes and the number should be a multiple of 4 (otherwise: rounded
-down).
-
 5) Options for Amiga Only:
 ==========================
 
diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
new file mode 100644
index 000000000000..a7e4c4ea3560
--- /dev/null
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -0,0 +1,168 @@
+README for MIPS AU1XXX IDE driver - Released 2005-07-15
+
+ABOUT
+-----
+This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
+services they provide.
+
+If you are short in patience and just want to know how to add your hard disc to
+the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
+section.
+
+
+LICENSE
+-------
+
+Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+675 Mass Ave, Cambridge, MA 02139, USA.
+
+Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+      Interface and Linux Device Driver" Application Note.
+
+
+FILES, CONFIGS AND COMPATABILITY
+--------------------------------
+
+Two files are introduced:
+
+  a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+     containes : struct _auide_hwif
+                 struct drive_list_entry dma_white_list
+                 struct drive_list_entry dma_black_list
+                 timing parameters for PIO mode 0/1/2/3/4
+                 timing parameters for MWDMA 0/1/2
+
+  b) 'drivers/ide/mips/au1xxx-ide.c'
+     contains the functionality of the AU1XXX IDE driver
+
+Four configs variables are introduced:
+
+  CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode
+  CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode
+  CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
+                                           controler
+  CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
+                                           per descriptor
+
+If MWDMA is enabled and the connected hard disc is not on the white list, the
+kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
+performance is substantial slower then in full speed mwdma. In this case
+please add your hard disc to the white list (follow instruction from 'ADD NEW
+HARD DISC TO WHITE OR BLACK LIST' section).
+
+
+SUPPORTED IDE MODES
+-------------------
+
+The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
+MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
+
+To change the PIO mode use the program hdparm with option -p, e.g.
+'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
+-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
+
+
+PERFORMANCE CONFIGURATIONS
+--------------------------
+
+If the used system doesn't need USB support enable the following kernel configs:
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+If the used system need the USB support enable the following kernel configs for
+high IDE to USB throughput.
+
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+
+ADD NEW HARD DISC TO WHITE OR BLACK LIST
+----------------------------------------
+
+Step 1 : detect the model name of your hard disc
+
+  a) connect your hard disc to the AU1XXX
+
+  b) boot your kernel and get the hard disc model.
+
+     Example boot log:
+
+     --snipped--
+     Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
+     ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
+     Au1xxx IDE(builtin) configured for MWDMA2
+     Probing IDE interface ide0...
+     hda: Maxtor 6E040L0, ATA DISK drive
+     ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
+     hda: max request size: 64KiB
+     hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
+     --snipped--
+
+     In this example 'Maxtor 6E040L0'.
+
+Step  2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+
+  Add your hard disc to the dma_white_list or dma_black_list structur.
+
+Step 3 : Recompile the kernel
+
+  Enable MWDMA support in the kernel configuration. Recompile the kernel and
+  reboot.
+
+Step 4 : Tests
+
+  If you have add a hard disc to the white list, please run some stress tests
+  for verification.
+
+
+ACKNOWLEDGMENTS
+---------------
+
+These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
+IDE driver from AMD.
+
+Additional input also from:
+Matthias Lenk <matthias.lenk@amd.com>
+
+Happy hacking!
+Enrico Walther <enrico.walther@amd.com>
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index b433c8a27e2d..65895bb51414 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -309,7 +309,7 @@ tcp_tso_win_divisor - INTEGER
        can be consumed by a single TSO frame.
        The setting of this parameter is a choice between burstiness and
        building larger TSO frames.
-       Default: 8
+       Default: 3
 
 tcp_frto - BOOLEAN
         Enables F-RTO, an enhanced recovery algorithm for TCP retransmission