46 files changed, 1370 insertions, 413 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index 0a92a7c93a62..4f29e5f1ebfa 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -31,3 +31,31 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:        iss_storagedev@hp.com
 Description:    A symbolic link to /sys/block/cciss!cXdY
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:           August 2009
+Kernel Version: 2.6.31
+Contact:        iss_storagedev@hp.com
+Description:    Kicks of a rescan of the controller to discover logical
+                drive topology changes.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:           August 2009
+Kernel Version: 2.6.31
+Contact:        iss_storagedev@hp.com
+Description:    Displays the 8-byte LUN ID used to address logical
+                drive Y of controller X.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:           August 2009
+Kernel Version: 2.6.31
+Contact:        iss_storagedev@hp.com
+Description:    Displays the RAID level of logical drive Y of
+                controller X.
+
+Where:          /sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:           August 2009
+Kernel Version: 2.6.31
+Contact:        iss_storagedev@hp.com
+Description:    Displays the usage count (number of opens) of logical drive Y
+                of controller X.
diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 46b66ad1f1b4..4e8106f7cfd9 100644
--- a/Documentation/ABI/testing/sysfs-class-usb_host
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -1,4 +1,4 @@
-What:           /sys/class/usb_host/usb_hostN/wusb_chid
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
diff --git a/Documentation/ABI/testing/sysfs-devices-cache_disable b/Documentation/ABI/testing/sysfs-devices-cache_disable
deleted file mode 100644
index 175bb4f70512..000000000000
--- a/Documentation/ABI/testing/sysfs-devices-cache_disable
+++ /dev/null
@@ -1,18 +0,0 @@
-What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date:      August 2008
-KernelVersion:  2.6.27
-Contact:        mark.langsdorf@amd.com
-Description:    These files exist in every cpu's cache index directories.
-                There are currently 2 cache_disable_# files in each
-                directory.  Reading from these files on a supported
-                processor will return that cache disable index value
-                for that processor and node.  Writing to one of these
-                files will cause the specificed cache index to be disabled.
-
-                Currently, only AMD Family 10h Processors support cache index
-                disable, and only for their L3 caches.  See the BIOS and
-                Kernel Developer's Guide at
-                http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
-                for formatting information and other details on the
-                cache index disable.
-Users:    joachim.deguara@amd.com
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
new file mode 100644
index 000000000000..a703b9e9aeb9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -0,0 +1,156 @@
+What:           /sys/devices/system/cpu/
+Date:           pre-git history
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+                A collection of both global and individual CPU attributes
+
+                Individual CPU attributes are contained in subdirectories
+                named by the kernel's logical CPU number, e.g.:
+
+                /sys/devices/system/cpu/cpu#/
+
+What:           /sys/devices/system/cpu/sched_mc_power_savings
+                /sys/devices/system/cpu/sched_smt_power_savings
+Date:           June 2006
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:    Discover and adjust the kernel's multi-core scheduler support.
+
+                Possible values are:
+
+                0 - No power saving load balance (default value)
+                1 - Fill one thread/core/package first for long running threads
+                2 - Also bias task wakeups to semi-idle cpu package for power
+                    savings
+
+                sched_mc_power_savings is dependent upon SCHED_MC, which is
+                itself architecture dependent.
+
+                sched_smt_power_savings is dependent upon SCHED_SMT, which
+                is itself architecture dependent.
+
+                The two files are independent of each other. It is possible
+                that one file may be present without the other.
+
+                Introduced by git commit 5c45bf27.
+
+
+What:           /sys/devices/system/cpu/kernel_max
+                /sys/devices/system/cpu/offline
+                /sys/devices/system/cpu/online
+                /sys/devices/system/cpu/possible
+                /sys/devices/system/cpu/present
+Date:           December 2008
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:    CPU topology files that describe kernel limits related to
+                hotplug. Briefly:
+
+                kernel_max: the maximum cpu index allowed by the kernel
+                configuration.
+
+                offline: cpus that are not online because they have been
+                HOTPLUGGED off or exceed the limit of cpus allowed by the
+                kernel configuration (kernel_max above).
+
+                online: cpus that are online and being scheduled.
+
+                possible: cpus that have been allocated resources and can be
+                brought online if they are present.
+
+                present: cpus that have been identified as being present in
+                the system.
+
+                See Documentation/cputopology.txt for more information.
+
+
+
+What:           /sys/devices/system/cpu/cpu#/node
+Date:           October 2009
+Contact:        Linux memory management mailing list <linux-mm@kvack.org>
+Description:    Discover NUMA node a CPU belongs to
+
+                When CONFIG_NUMA is enabled, a symbolic link that points
+                to the corresponding NUMA node directory.
+
+                For example, the following symlink is created for cpu42
+                in NUMA node 2:
+
+                /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
+
+What:           /sys/devices/system/cpu/cpu#/topology/core_id
+                /sys/devices/system/cpu/cpu#/topology/core_siblings
+                /sys/devices/system/cpu/cpu#/topology/core_siblings_list
+                /sys/devices/system/cpu/cpu#/topology/physical_package_id
+                /sys/devices/system/cpu/cpu#/topology/thread_siblings
+                /sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+Date:           December 2008
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:    CPU topology files that describe a logical CPU's relationship
+                to other cores and threads in the same physical package.
+
+                One cpu# directory is created per logical CPU in the system,
+                e.g. /sys/devices/system/cpu/cpu42/.
+
+                Briefly, the files above are:
+
+                core_id: the CPU core ID of cpu#. Typically it is the
+                hardware platform's identifier (rather than the kernel's).
+                The actual value is architecture and platform dependent.
+
+                core_siblings: internal kernel map of cpu#'s hardware threads
+                within the same physical_package_id.
+
+                core_siblings_list: human-readable list of the logical CPU
+                numbers within the same physical_package_id as cpu#.
+
+                physical_package_id: physical package id of cpu#. Typically
+                corresponds to a physical socket number, but the actual value
+                is architecture and platform dependent.
+
+                thread_siblings: internel kernel map of cpu#'s hardware
+                threads within the same core as cpu#
+
+                thread_siblings_list: human-readable list of cpu#'s hardware
+                threads within the same core as cpu#
+
+                See Documentation/cputopology.txt for more information.
+
+
+What:           /sys/devices/system/cpu/cpuidle/current_driver
+                /sys/devices/system/cpu/cpuidle/current_governer_ro
+Date:           September 2007
+Contact:        Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:    Discover cpuidle policy and mechanism
+
+                Various CPUs today support multiple idle levels that are
+                differentiated by varying exit latencies and power
+                consumption during idle.
+
+                Idle policy (governor) is differentiated from idle mechanism
+                (driver)
+
+                current_driver: displays current idle mechanism
+
+                current_governor_ro: displays current idle policy
+
+                See files in Documentation/cpuidle/ for more information.
+
+
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:  2.6.27
+Contact:        mark.langsdorf@amd.com
+Description:    These files exist in every cpu's cache index directories.
+                There are currently 2 cache_disable_# files in each
+                directory.  Reading from these files on a supported
+                processor will return that cache disable index value
+                for that processor and node.  Writing to one of these
+                files will cause the specificed cache index to be disabled.
+
+                Currently, only AMD Family 10h Processors support cache index
+                disable, and only for their L3 caches.  See the BIOS and
+                Kernel Developer's Guide at
+                http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+                for formatting information and other details on the
+                cache index disable.
+Users:    joachim.deguara@amd.com
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index b7f9d3b4bbf6..72651f788f4e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 074f4be6667f..77fd9376e6d7 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -29,11 +29,13 @@ TCM location and size. Notice that this is not a MMU table: you
 actually move the physical location of the TCM around. At the
 place you put it, it will mask any underlying RAM from the
 CPU so it is usually wise not to overlap any physical RAM with
-the TCM. The TCM memory exists totally outside the MMU and will
-override any MMU mappings.
+the TCM.
 
-Code executing inside the ITCM does not "see" any MMU mappings
-and e.g. register accesses must be made to physical addresses.
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
 
 TCM is used for a few things:
 
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 455d4e6d346d..0b33bfe7dde9 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread id into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup.  This list is not
+   guaranteed to be sorted or free of duplicate tgids, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index 1711adc33373..b07add3467f1 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-static void cn_test_callback(struct cn_msg *msg)
+static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
         pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
                 __func__, jiffies, msg->id.idx, msg->id.val,
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index 81e6bf6ead57..78c9466a9aa8 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -23,7 +23,7 @@ handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
 easier way:
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
 
 struct cb_id
@@ -53,15 +53,15 @@ struct cn_msg
 Connector interfaces.
 /*****************************************/
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 
  Registers new callback with connector core.
 
  struct cb_id *id               - unique connector's user identifier.
                                   It must be registered in connector.h for legal in-kernel users.
  char *name                     - connector's callback symbolic name.
- void (*callback) (void *)      - connector's callback.
-                                  Argument must be dereferenced to struct cn_msg *.
+ void (*callback) (struct cn..) - connector's callback.
+                                  cn_msg and the sender's credentials
 
 
 void cn_del_callback(struct cb_id *id);
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
index b41f3e58aefa..f1c5c4bccd3e 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/cputopology.txt
@@ -1,15 +1,28 @@
 
-Export cpu topology info via sysfs. Items (attributes) are similar
+Export CPU topology info via sysfs. Items (attributes) are similar
 to /proc/cpuinfo.
 
 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
-represent the physical package id of  cpu X;
+
+        physical package id of cpuX. Typically corresponds to a physical
+        socket number, but the actual value is architecture and platform
+        dependent.
+
 2) /sys/devices/system/cpu/cpuX/topology/core_id:
-represent the cpu core id to cpu X;
+
+        the CPU core ID of cpuX. Typically it is the hardware platform's
+        identifier (rather than the kernel's).  The actual value is
+        architecture and platform dependent.
+
 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
-represent the thread siblings to cpu X in the same core;
+
+        internel kernel map of cpuX's hardware threads within the same
+        core as cpuX
+
 4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
-represent the thread siblings to cpu X in the same physical package;
+
+        internal kernel map of cpuX's hardware threads within the same
+        physical_package_id.
 
 To implement it in an architecture-neutral way, a new source file,
 drivers/base/topology.c, is to export the 4 attributes.
@@ -32,32 +45,32 @@ not defined by include/asm-XXX/topology.h:
 3) thread_siblings: just the given CPU
 4) core_siblings: just the given CPU
 
-Additionally, cpu topology information is provided under
+Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal
 source for the output is in brackets ("[]").
 
-    kernel_max: the maximum cpu index allowed by the kernel configuration.
+    kernel_max: the maximum CPU index allowed by the kernel configuration.
                 [NR_CPUS-1]
 
-    offline:    cpus that are not online because they have been
+    offline:    CPUs that are not online because they have been
                 HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit
-                of cpus allowed by the kernel configuration (kernel_max
+                of CPUs allowed by the kernel configuration (kernel_max
                 above). [~cpu_online_mask + cpus >= NR_CPUS]
 
-    online:     cpus that are online and being scheduled [cpu_online_mask]
+    online:     CPUs that are online and being scheduled [cpu_online_mask]
 
-    possible:   cpus that have been allocated resources and can be
+    possible:   CPUs that have been allocated resources and can be
                 brought online if they are present. [cpu_possible_mask]
 
-    present:    cpus that have been identified as being present in the
+    present:    CPUs that have been identified as being present in the
                 system. [cpu_present_mask]
 
 The format for the above output is compatible with cpulist_parse()
 [see <linux/cpumask.h>].  Some examples follow.
 
-In this example, there are 64 cpus in the system but cpus 32-63 exceed
+In this example, there are 64 CPUs in the system but cpus 32-63 exceed
 the kernel max which is limited to 0..31 by the NR_CPUS config option
-being 32.  Note also that cpus 2 and 4-31 are not online but could be
+being 32.  Note also that CPUs 2 and 4-31 are not online but could be
 brought online as they are both present and possible.
 
      kernel_max: 31
@@ -67,8 +80,8 @@ brought online as they are both present and possible.
         present: 0-31
 
 In this example, the NR_CPUS config option is 128, but the kernel was
-started with possible_cpus=144.  There are 4 cpus in the system and cpu2
-was manually taken offline (and is the only cpu that can be brought
+started with possible_cpus=144.  There are 4 CPUs in the system and cpu2
+was manually taken offline (and is the only CPU that can be brought
 online.)
 
      kernel_max: 127
@@ -78,4 +91,4 @@ online.)
         present: 0-3
 
 See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter
-as well as more information on the various cpumask's.
+as well as more information on the various cpumasks.
diff --git a/Documentation/debugging-via-ohci1394.txt b/Documentation/debugging-via-ohci1394.txt
index 59a91e5c6909..611f5a5499b1 100644
--- a/Documentation/debugging-via-ohci1394.txt
+++ b/Documentation/debugging-via-ohci1394.txt
@@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
 
 and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
 
 There is also a gdb proxy for firewire which allows to use gdb to access
 data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
 
 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
 yet stable) with kgdb over an memory-based communication module (kgdbom).
@@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 Notes
 -----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
 
 FireWire is a trademark of Apple Inc. - for more information please refer to:
 http://en.wikipedia.org/wiki/FireWire
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt
index b3e3a0356839..fe79e3c8847d 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -312,10 +312,8 @@ and to the following documentation:
 8. Mailing list
 ---------------
 
-There are several frame buffer device related mailing lists at SourceForge:
-  - linux-fbdev-announce@lists.sourceforge.net, for announcements,
-  - linux-fbdev-user@lists.sourceforge.net, for generic user support,
-  - linux-fbdev-devel@lists.sourceforge.net, for project developers.
+There is a frame buffer device related mailing list at kernel.org:
+linux-fbdev@vger.kernel.org.
 
 Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for
 subscription information and archive browsing.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 89a47b5aff07..bc693fffabe0 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -418,6 +418,14 @@ When:	2.6.33
 Why:    Should be implemented in userspace, policy daemon.
 Who:    Johannes Berg <johannes@sipsolutions.net>
 
+---------------------------
+
+What:   CONFIG_INOTIFY
+When:   2.6.33
+Why:    last user (audit) will be converted to the newer more generic
+        and more easily maintained fsnotify subsystem
+Who:    Eric Paris <eparis@redhat.com>
+
 ----------------------------
 
 What:   lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
@@ -451,3 +459,33 @@ Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
         will also allow making ALSA OSS emulation independent of
         sound_core.  The dependency will be broken then too.
 Who:    Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What:   Support for VMware's guest paravirtuliazation technique [VMI] will be
+        dropped.
+When:   2.6.37 or earlier.
+Why:    With the recent innovations in CPU hardware acceleration technologies
+        from Intel and AMD, VMware ran a few experiments to compare these
+        techniques to guest paravirtualization technique on VMware's platform.
+        These hardware assisted virtualization techniques have outperformed the
+        performance benefits provided by VMI in most of the workloads. VMware
+        expects that these hardware features will be ubiquitous in a couple of
+        years, as a result, VMware has started a phased retirement of this
+        feature from the hypervisor. We will be removing this feature from the
+        Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+        technical reasons (read opportunity to remove major chunk of pvops)
+        arise.
+
+        Please note that VMI has always been an optimization and non-VMI kernels
+        still work fine on VMware's platform.
+        Latest versions of VMware's product which support VMI are,
+        Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+        releases for these products will continue supporting VMI.
+
+        For more details about VMI retirement take a look at this,
+        http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who:    Alok N Kataria <akataria@vmware.com>
+
+----------------------------
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
index 9e94b9491d89..a91e2e2095b0 100644
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -235,6 +235,7 @@ proc files.
                 neg=N   Number of negative lookups made
                 pos=N   Number of positive lookups made
                 crt=N   Number of objects created by lookup
+                tmo=N   Number of lookups timed out and requeued
         Updates n=N     Number of update cookie requests seen
                 nul=N   Number of upd reqs given a NULL parent
                 run=N   Number of upd reqs granted CPU time
@@ -250,8 +251,10 @@ proc files.
                 ok=N    Number of successful alloc reqs
                 wt=N    Number of alloc reqs that waited on lookup completion
                 nbf=N   Number of alloc reqs rejected -ENOBUFS
+                int=N   Number of alloc reqs aborted -ERESTARTSYS
                 ops=N   Number of alloc reqs submitted
                 owt=N   Number of alloc reqs waited for CPU time
+                abt=N   Number of alloc reqs aborted due to object death
         Retrvls n=N     Number of retrieval (read) requests seen
                 ok=N    Number of successful retr reqs
                 wt=N    Number of retr reqs that waited on lookup completion
@@ -261,6 +264,7 @@ proc files.
                 oom=N   Number of retr reqs failed -ENOMEM
                 ops=N   Number of retr reqs submitted
                 owt=N   Number of retr reqs waited for CPU time
+                abt=N   Number of retr reqs aborted due to object death
         Stores  n=N     Number of storage (write) requests seen
                 ok=N    Number of successful store reqs
                 agn=N   Number of store reqs on a page already pending storage
@@ -268,12 +272,37 @@ proc files.
                 oom=N   Number of store reqs failed -ENOMEM
                 ops=N   Number of store reqs submitted
                 run=N   Number of store reqs granted CPU time
+                pgs=N   Number of pages given store req processing time
+                rxd=N   Number of store reqs deleted from tracking tree
+                olm=N   Number of store reqs over store limit
+        VmScan  nos=N   Number of release reqs against pages with no pending store
+                gon=N   Number of release reqs against pages stored by time lock granted
+                bsy=N   Number of release reqs ignored due to in-progress store
+                can=N   Number of page stores cancelled due to release req
         Ops     pend=N  Number of times async ops added to pending queues
                 run=N   Number of times async ops given CPU time
                 enq=N   Number of times async ops queued for processing
+                can=N   Number of async ops cancelled
+                rej=N   Number of async ops rejected due to object lookup/create failure
                 dfr=N   Number of async ops queued for deferred release
                 rel=N   Number of async ops released
                 gc=N    Number of deferred-release async ops garbage collected
+        CacheOp alo=N   Number of in-progress alloc_object() cache ops
+                luo=N   Number of in-progress lookup_object() cache ops
+                luc=N   Number of in-progress lookup_complete() cache ops
+                gro=N   Number of in-progress grab_object() cache ops
+                upo=N   Number of in-progress update_object() cache ops
+                dro=N   Number of in-progress drop_object() cache ops
+                pto=N   Number of in-progress put_object() cache ops
+                syn=N   Number of in-progress sync_cache() cache ops
+                atc=N   Number of in-progress attr_changed() cache ops
+                rap=N   Number of in-progress read_or_alloc_page() cache ops
+                ras=N   Number of in-progress read_or_alloc_pages() cache ops
+                alp=N   Number of in-progress allocate_page() cache ops
+                als=N   Number of in-progress allocate_pages() cache ops
+                wrp=N   Number of in-progress write_page() cache ops
+                ucp=N   Number of in-progress uncache_page() cache ops
+                dsp=N   Number of in-progress dissociate_pages() cache ops
 
 
  (*) /proc/fs/fscache/histogram
@@ -299,6 +328,87 @@ proc files.
      jiffy range covered, and the SECS field the equivalent number of seconds.
 
 
+===========
+OBJECT LIST
+===========
+
+If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a
+list of all the objects currently allocated and allow them to be viewed
+through:
+
+        /proc/fs/fscache/objects
+
+This will look something like:
+
+        [root@andromeda ~]# head /proc/fs/fscache/objects
+        OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
+        ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
+           17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+           1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+
+where the first set of columns before the '|' describe the object:
+
+        COLUMN  DESCRIPTION
+        ======= ===============================================================
+        OBJECT  Object debugging ID (appears as OBJ%x in some debug messages)
+        PARENT  Debugging ID of parent object
+        STAT    Object state
+        CHLDN   Number of child objects of this object
+        OPS     Number of outstanding operations on this object
+        OOP     Number of outstanding child object management operations
+        IPR
+        EX      Number of outstanding exclusive operations
+        READS   Number of outstanding read operations
+        EM      Object's event mask
+        EV      Events raised on this object
+        F       Object flags
+        S       Object slow-work work item flags
+
+and the second set of columns describe the object's cookie, if present:
+
+        COLUMN          DESCRIPTION
+        =============== =======================================================
+        NETFS_COOKIE_DEF Name of netfs cookie definition
+        TY              Cookie type (IX - index, DT - data, hex - special)
+        FL              Cookie flags
+        NETFS_DATA      Netfs private data stored in the cookie
+        OBJECT_KEY      Object key      } 1 column, with separating comma
+        AUX_DATA        Object aux data } presence may be configured
+
+The data shown may be filtered by attaching the a key to an appropriate keyring
+before viewing the file.  Something like:
+
+                keyctl add user fscache:objlist <restrictions> @s
+
+where <restrictions> are a selection of the following letters:
+
+        K       Show hexdump of object key (don't show if not given)
+        A       Show hexdump of object aux data (don't show if not given)
+
+and the following paired letters:
+
+        C       Show objects that have a cookie
+        c       Show objects that don't have a cookie
+        B       Show objects that are busy
+        b       Show objects that aren't busy
+        W       Show objects that have pending writes
+        w       Show objects that don't have pending writes
+        R       Show objects that have outstanding reads
+        r       Show objects that don't have outstanding reads
+        S       Show objects that have slow work queued
+        s       Show objects that don't have slow work queued
+
+If neither side of a letter pair is given, then both are implied.  For example:
+
+        keyctl add user fscache:objlist KB @s
+
+shows objects that are busy, and lists their object keys, but does not dump
+their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
+not implied.
+
+By default all objects and all fields will be shown.
+
+
 =========
 DEBUGGING
 =========
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 2666b1ed5e9e..1902c57b72ef 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -641,7 +641,7 @@ data file must be retired (see the relinquish cookie function below).
 
 Furthermore, note that this does not cancel the asynchronous read or write
 operation started by the read/alloc and write functions, so the page
-invalidation and release functions must use:
+invalidation functions must use:
 
         bool fscache_check_page_write(struct fscache_cookie *cookie,
                                       struct page *page);
@@ -654,6 +654,25 @@ to see if a page is being written to the cache, and:
 to wait for it to finish if it is.
 
 
+When releasepage() is being implemented, a special FS-Cache function exists to
+manage the heuristics of coping with vmscan trying to eject pages, which may
+conflict with the cache trying to write pages to the cache (which may itself
+need to allocate memory):
+
+        bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+                                        struct page *page,
+                                        gfp_t gfp);
+
+This takes the netfs cookie, and the page and gfp arguments as supplied to
+releasepage().  It will return false if the page cannot be released yet for
+some reason and if it returns true, the page has been uncached and can now be
+released.
+
+To make a page available for release, this function may wait for an outstanding
+storage request to complete, or it may attempt to cancel the storage request -
+in which case the page will not be stored in the cache this time.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 570f9bd9be2b..05d5cf1d743f 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -123,10 +123,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n                    Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota                   These options are ignored by the filesystem. They
+noquota                 are used only by quota tools to recognize volumes
+grpquota                where quota should be turned on. See documentation
+usrquota                in the quota-tools package for more details
+                        (http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>      These options tell filesystem details about quota
+usrjquota=<file>        so that quota information can be properly updated
+grpjquota=<file>        during journal replay. They replace the above
+                        quota options. See documentation in the quota-tools
+                        package for more details
+                        (http://sourceforge.net/projects/linuxquota).
 
 bh              (*)     ext3 associates buffer heads to data pages to
 nobh                    (a) cache disk block mapping information
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 18b5ec8cea45..6d94e0696f8c 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -134,9 +134,15 @@ ro                   	Mount filesystem read only. Note that ext4 will
                         mount options "ro,noload" can be used to prevent
                         writes to the filesystem.
 
+journal_checksum        Enable checksumming of the journal transactions.
+                        This will allow the recovery code in e2fsck and the
+                        kernel to detect corruption in the kernel.  It is a
+                        compatible change and will be ignored by older kernels.
+
 journal_async_commit    Commit block can be written to disk without waiting
                         for descriptor blocks. If enabled older kernels cannot
-                        mount the device.
+                        mount the device. This will enable 'journal_checksum'
+                        internally.
 
 journal=update          Update the ext4 file system's journal to the current
                         format.
@@ -282,9 +288,16 @@ stripe=n		Number of filesystem blocks that mballoc will try
                         to use for allocation size and alignment. For RAID5/6
                         systems this should be the number of data
                         disks *  RAID chunk size in file system blocks.
-delalloc        (*)     Deferring block allocation until write-out time.
-nodelalloc              Disable delayed allocation. Blocks are allocation
-                        when data is copied from user to page cache.
+
+delalloc        (*)     Defer block allocation until just before ext4
+                        writes out the block(s) in question.  This
+                        allows ext4 to better allocation decisions
+                        more efficiently.
+nodelalloc              Disable delayed allocation.  Blocks are allocated
+                        when the data is copied from userspace to the
+                        page cache, either via the write(2) system call
+                        or when an mmap'ed page which was previously
+                        unallocated is written for the first time.
 
 max_batch_time=usec     Maximum amount of time ext4 should wait for
                         additional filesystem operations to be batch
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index c2a0871280a0..c58b9f5ba002 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -20,15 +20,16 @@ Lots of code taken from ext3 and other projects.
 Authors in alphabetical order:
 Joel Becker   <joel.becker@oracle.com>
 Zach Brown    <zach.brown@oracle.com>
-Mark Fasheh   <mark.fasheh@oracle.com>
+Mark Fasheh   <mfasheh@suse.com>
 Kurt Hackel   <kurt.hackel@oracle.com>
+Tao Ma        <tao.ma@oracle.com>
 Sunil Mushran <sunil.mushran@oracle.com>
 Manish Singh  <manish.singh@oracle.com>
+Tiger Yang    <tiger.yang@oracle.com>
 
 Caveats
 =======
 Features which OCFS2 does not support yet:
-        - quotas
         - Directory change notification (F_NOTIFY)
         - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 
@@ -70,7 +71,6 @@ commit=nrsec	(*)	Ocfs2 can be told to sync all its data and metadata
                         performance.
 localalloc=8(*)         Allows custom localalloc size in MB. If the value is too
                         large, the fs will silently revert it to the default.
-                        Localalloc is not enabled for local mounts.
 localflocks             This disables cluster aware flock.
 inode64                 Indicates that Ocfs2 is allowed to create inodes at
                         any location in the filesystem, including those which
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index b5aee7838a00..2c48f945546b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index b58b84b50fa2..eed520fd0c8e 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed
                  winnt: emulate the Windows NT rule for display/create.
                  mixed: emulate the Windows NT rule for display,
                         emulate the Windows 95 rule for create.
-                 Default setting is `lower'.
+                 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps
diff --git a/Documentation/flexible-arrays.txt b/Documentation/flexible-arrays.txt
index 84eb26808dee..cb8a3a00cc92 100644
--- a/Documentation/flexible-arrays.txt
+++ b/Documentation/flexible-arrays.txt
@@ -1,5 +1,5 @@
 Using flexible arrays in the kernel
-Last updated for 2.6.31
+Last updated for 2.6.32
 Jonathan Corbet <corbet@lwn.net>
 
 Large contiguous memory allocations can be unreliable in the Linux kernel.
@@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls.  With
 the current code, using flags to ask for high memory is likely to lead to
 notably unpleasant side effects.
 
+It is also possible to define flexible arrays at compile time with:
+
+    DEFINE_FLEX_ARRAY(name, element_size, total);
+
+This macro will result in a definition of an array with the given name; the
+element size and total will be checked for validity at compile time.
+
 Storing data into a flexible array is accomplished with a call to:
 
     int flex_array_put(struct flex_array *array, unsigned int element_nr,
@@ -76,16 +83,30 @@ particular element has never been allocated.
 Note that it is possible to get back a valid pointer for an element which
 has never been stored in the array.  Memory for array elements is allocated
 one page at a time; a single allocation could provide memory for several
-adjacent elements.  The flexible array code does not know if a specific
-element has been written; it only knows if the associated memory is
-present.  So a flex_array_get() call on an element which was never stored
-in the array has the potential to return a pointer to random data.  If the
-caller does not have a separate way to know which elements were actually
-stored, it might be wise, at least, to add GFP_ZERO to the flags argument
-to ensure that all elements are zeroed.
-
-There is no way to remove a single element from the array.  It is possible,
-though, to remove all elements with a call to:
+adjacent elements.  Flexible array elements are normally initialized to the
+value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
+involving that number probably result from use of unstored array entries.
+Note that, if array elements are allocated with __GFP_ZERO, they will be
+initialized to zero and this poisoning will not happen.
+
+Individual elements in the array can be cleared with:
+
+    int flex_array_clear(struct flex_array *array, unsigned int element_nr);
+
+This function will set the given element to FLEX_ARRAY_FREE and return
+zero.  If storage for the indicated element is not allocated for the array,
+flex_array_clear() will return -EINVAL instead.  Note that clearing an
+element does not release the storage associated with it; to reduce the
+allocated size of an array, call:
+
+    int flex_array_shrink(struct flex_array *array);
+
+The return value will be the number of pages of memory actually freed.
+This function works by scanning the array for pages containing nothing but
+FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
+if the array's pages are allocated with __GFP_ZERO.
+
+It is possible to remove all elements of an array with a call to:
 
     void flex_array_free_parts(struct flex_array *array);
 
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
index 2e6a21eb656c..c196a1846259 100644
--- a/Documentation/hwmon/ltc4215
+++ b/Documentation/hwmon/ltc4215
@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index bae7a3adc5d8..02838a47d862 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index dcbd502c8792..82def883361b 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -353,10 +353,20 @@ power[1-*]_average		Average power use
                                 Unit: microWatt
                                 RO
 
-power[1-*]_average_interval     Power use averaging interval
+power[1-*]_average_interval     Power use averaging interval.  A poll
+                                notification is sent to this file if the
+                                hardware changes the averaging interval.
                                 Unit: milliseconds
                                 RW
 
+power[1-*]_average_interval_max Maximum power use averaging interval
+                                Unit: milliseconds
+                                RO
+
+power[1-*]_average_interval_min Minimum power use averaging interval
+                                Unit: milliseconds
+                                RO
+
 power[1-*]_average_highest      Historical average maximum power use
                                 Unit: microWatt
                                 RO
@@ -365,6 +375,18 @@ power[1-*]_average_lowest	Historical average minimum power use
                                 Unit: microWatt
                                 RO
 
+power[1-*]_average_max          A poll notification is sent to
+                                power[1-*]_average when power use
+                                rises above this value.
+                                Unit: microWatt
+                                RW
+
+power[1-*]_average_min          A poll notification is sent to
+                                power[1-*]_average when power use
+                                sinks below this value.
+                                Unit: microWatt
+                                RW
+
 power[1-*]_input                Instantaneous power use
                                 Unit: microWatt
                                 RO
@@ -381,6 +403,39 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
                                 average_highest and average_lowest.
                                 WO
 
+power[1-*]_accuracy             Accuracy of the power meter.
+                                Unit: Percent
+                                RO
+
+power[1-*]_alarm                1 if the system is drawing more power than the
+                                cap allows; 0 otherwise.  A poll notification is
+                                sent to this file when the power use exceeds the
+                                cap.  This file only appears if the cap is known
+                                to be enforced by hardware.
+                                RO
+
+power[1-*]_cap                  If power use rises above this limit, the
+                                system should take action to reduce power use.
+                                A poll notification is sent to this file if the
+                                cap is changed by the hardware.  The *_cap
+                                files only appear if the cap is known to be
+                                enforced by hardware.
+                                Unit: microWatt
+                                RW
+
+power[1-*]_cap_hyst             Margin of hysteresis built around capping and
+                                notification.
+                                Unit: microWatt
+                                RW
+
+power[1-*]_cap_max              Maximum cap that can be set.
+                                Unit: microWatt
+                                RO
+
+power[1-*]_cap_min              Minimum cap that can be set.
+                                Unit: microWatt
+                                RO
+
 **********
 * Energy *
 **********
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index c5b37c570554..ac540c71c7eb 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD SB900
+  * AMD Hudson-2
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c740b7b41088..e89490270aba 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:
diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt
index 744687dd195b..8a366959f5cc 100644
--- a/Documentation/infiniband/user_mad.txt
+++ b/Documentation/infiniband/user_mad.txt
@@ -128,8 +128,8 @@ Setting IsSM Capability Bit
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="umad*", NAME="infiniband/%k"
-    KERNEL="issm*", NAME="infiniband/%k"
+    KERNEL=="umad*", NAME="infiniband/%k"
+    KERNEL=="issm*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 
diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.txt
index f847501e50b5..afe3f8da9018 100644
--- a/Documentation/infiniband/user_verbs.txt
+++ b/Documentation/infiniband/user_verbs.txt
@@ -58,7 +58,7 @@ Memory pinning
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="uverbs*", NAME="infiniband/%k"
+    KERNEL=="uverbs*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 686e107923ec..5fe8de5cc727 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -60,10 +60,9 @@ open() operation on regular files or character devices.
 
 After a successful return from register_appl(), CAPI messages from the
 application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
 
 Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
 forwarded as calls to the release_appl() callback function, passing the same
@@ -142,6 +141,7 @@ u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
         to accepting or queueing the message. Errors occurring during the
         actual processing of the message should be signaled with an
         appropriate reply message.
+        May be called in process or interrupt context.
         Calls to this function are not serialized by Kernel CAPI, ie. it must
         be prepared to be re-entered.
 
@@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
         system entry, /proc/capi/controllers/<n>; will be called with a
         pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
 
 - to be filled in before calling capi_ctr_ready():
 
@@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
         value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
 
 (declared in <linux/isdn/capiutil.h>)
 
 The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+  and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
 
 Members are named after the CAPI 2.0 standard names of the parameters they
 represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
@@ -190,18 +217,19 @@ u16         for CAPI parameters of type 'word'
 
 u32         for CAPI parameters of type 'dword'
 
-_cstruct    for CAPI parameters of type 'struct' not containing any
-            variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct    for CAPI parameters of type 'struct'
             The member is a pointer to a buffer containing the parameter in
             CAPI encoding (length + content). It may also be NULL, which will
             be taken to represent an empty (zero length) parameter.
+            Subparameters are stored in encoded form within the content part.
 
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-            subparameters ('Additional Info' and 'B Protocol')
+_cmstruct   alternative representation for CAPI parameters of type 'struct'
+            (used only for the 'Additional Info' and 'B Protocol' parameters)
             The representation is a single byte containing one of the values:
-            CAPI_DEFAULT: the parameter is empty
-            CAPI_COMPOSE: the values of the subparameters are stored
-            individually in the corresponding _cmsg structure members
+            CAPI_DEFAULT: The parameter is empty/absent.
+            CAPI_COMPOSE: The parameter is present.
+            Subparameter values are stored individually in the corresponding
+            _cmsg structure members.
 
 Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
@@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
         be NULL if the command/subcommand is not one of those defined in the
         CAPI 2.0 standard.
 
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5d386b4ff6a0..332fe3b47e0c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -670,6 +670,7 @@ and is between 256 and 4096 characters. It is defined in the file
         earlyprintk=    [X86,SH,BLACKFIN]
                         earlyprintk=vga
                         earlyprintk=serial[,ttySn[,baudrate]]
+                        earlyprintk=ttySn[,baudrate]
                         earlyprintk=dbgp[debugController#]
 
                         Append ",keep" to not disable it when the real console
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index ba9373f82ab5..098de5bce00a 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -42,7 +42,6 @@
 #include <signal.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
-#include <linux/virtio_ids.h>
 #include "linux/virtio_net.h"
 #include "linux/virtio_blk.h"
 #include "linux/virtio_console.h"
diff --git a/Documentation/i2c/chips/eeprom b/Documentation/misc-devices/eeprom
index f7e8104b5764..f7e8104b5764 100644
--- a/Documentation/i2c/chips/eeprom
+++ b/Documentation/misc-devices/eeprom
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/misc-devices/max6875
index 10ca43cd1a72..1e89ee3ccc1b 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/misc-devices/max6875
@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index c6cf4a3c16e0..61bb645d50e0 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -90,6 +90,11 @@ Examples:
  pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
  pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
 
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+                         To select queue 1 of a given device,
+                         use queue_map_min=1 and queue_map_max=1
+
  pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
                          The 'minimum' MAC is what you set with srcmac.
 
@@ -101,6 +106,9 @@ Examples:
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
                               MPLS_RND, VID_RND, SVID_RND
+                              QUEUE_MAP_RND # queue map random
+                              QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.
diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c
index 43d143104210..a7936fe8444a 100644
--- a/Documentation/networking/timestamping/timestamping.c
+++ b/Documentation/networking/timestamping/timestamping.c
@@ -381,7 +381,7 @@ int main(int argc, char **argv)
         memset(&hwtstamp, 0, sizeof(hwtstamp));
         strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
         hwtstamp.ifr_data = (void *)&hwconfig;
-        memset(&hwconfig, 0, sizeof(&hwconfig));
+        memset(&hwconfig, 0, sizeof(hwconfig));
         hwconfig.tx_type =
                 (so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
                 HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt
index a6eb4add1be6..9605179711f4 100644
--- a/Documentation/scsi/hptiop.txt
+++ b/Documentation/scsi/hptiop.txt
@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
index ebc50f808ea4..9dbf4470c7e1 100644
--- a/Documentation/slow-work.txt
+++ b/Documentation/slow-work.txt
@@ -41,6 +41,13 @@ expand files, provided the time taken to do so isn't too long.
 Operations of both types may sleep during execution, thus tying up the thread
 loaned to it.
 
+A further class of work item is available, based on the slow work item class:
+
+ (*) Delayed slow work items.
+
+These are slow work items that have a timer to defer queueing of the item for
+a while.
+
 
 THREAD-TO-CLASS ALLOCATION
 --------------------------
@@ -64,9 +71,11 @@ USING SLOW WORK ITEMS
 Firstly, a module or subsystem wanting to make use of slow work items must
 register its interest:
 
-         int ret = slow_work_register_user();
+         int ret = slow_work_register_user(struct module *module);
 
-This will return 0 if successful, or a -ve error upon failure.
+This will return 0 if successful, or a -ve error upon failure.  The module
+pointer should be the module interested in using this facility (almost
+certainly THIS_MODULE).
 
 
 Slow work items may then be set up by:
@@ -93,6 +102,10 @@ Slow work items may then be set up by:
 
      or:
 
+        delayed_slow_work_init(&myitem, &myitem_ops);
+
+     or:
+
         vslow_work_init(&myitem, &myitem_ops);
 
      depending on its class.
@@ -102,15 +115,92 @@ A suitably set up work item can then be enqueued for processing:
         int ret = slow_work_enqueue(&myitem);
 
 This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise.
+on the item, 0 otherwise, or (for delayed work):
+
+        int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
 
 
 The items are reference counted, so there ought to be no need for a flush
-operation.  When all a module's slow work items have been processed, and the
+operation.  But as the reference counting is optional, means to cancel
+existing work items are also included:
+
+        cancel_slow_work(&myitem);
+        cancel_delayed_slow_work(&myitem);
+
+can be used to cancel pending work.  The above cancel function waits for
+existing work to have been executed (or prevent execution of them, depending
+on timing).
+
+
+When all a module's slow work items have been processed, and the
 module has no further interest in the facility, it should unregister its
 interest:
 
-        slow_work_unregister_user();
+        slow_work_unregister_user(struct module *module);
+
+The module pointer is used to wait for all outstanding work items for that
+module before completing the unregistration.  This prevents the put_ref() code
+from being taken away before it completes.  module should almost certainly be
+THIS_MODULE.
+
+
+================
+HELPER FUNCTIONS
+================
+
+The slow-work facility provides a function by which it can be determined
+whether or not an item is queued for later execution:
+
+        bool queued = slow_work_is_queued(struct slow_work *work);
+
+If it returns false, then the item is not on the queue (it may be executing
+with a requeue pending).  This can be used to work out whether an item on which
+another depends is on the queue, thus allowing a dependent item to be queued
+after it.
+
+If the above shows an item on which another depends not to be queued, then the
+owner of the dependent item might need to wait.  However, to avoid locking up
+the threads unnecessarily be sleeping in them, it can make sense under some
+circumstances to return the work item to the queue, thus deferring it until
+some other items have had a chance to make use of the yielded thread.
+
+To yield a thread and defer an item, the work function should simply enqueue
+the work item again and return.  However, this doesn't work if there's nothing
+actually on the queue, as the thread just vacated will jump straight back into
+the item's work function, thus busy waiting on a CPU.
+
+Instead, the item should use the thread to wait for the dependency to go away,
+but rather than using schedule() or schedule_timeout() to sleep, it should use
+the following function:
+
+        bool requeue = slow_work_sleep_till_thread_needed(
+                        struct slow_work *work,
+                        signed long *_timeout);
+
+This will add a second wait and then sleep, such that it will be woken up if
+either something appears on the queue that could usefully make use of the
+thread - and behind which this item can be queued, or if the event the caller
+set up to wait for happens.  True will be returned if something else appeared
+on the queue and this work function should perhaps return, of false if
+something else woke it up.  The timeout is as for schedule_timeout().
+
+For example:
+
+        wq = bit_waitqueue(&my_flags, MY_BIT);
+        init_wait(&wait);
+        requeue = false;
+        do {
+                prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+                if (!test_bit(MY_BIT, &my_flags))
+                        break;
+                requeue = slow_work_sleep_till_thread_needed(&my_work,
+                                                             &timeout);
+        } while (timeout > 0 && !requeue);
+        finish_wait(wq, &wait);
+        if (!test_bit(MY_BIT, &my_flags)
+                goto do_my_thing;
+        if (requeue)
+                return; // to slow_work
 
 
 ===============
@@ -118,7 +208,8 @@ ITEM OPERATIONS
 ===============
 
 Each work item requires a table of operations of type struct slow_work_ops.
-All members are required:
+Only ->execute() is required; the getting and putting of a reference and the
+describing of an item are all optional.
 
  (*) Get a reference on an item:
 
@@ -148,6 +239,16 @@ All members are required:
      This should perform the work required of the item.  It may sleep, it may
      perform disk I/O and it may wait for locks.
 
+ (*) View an item through /proc:
+
+        void (*desc)(struct slow_work *work, struct seq_file *m);
+
+     If supplied, this should print to 'm' a small string describing the work
+     the item is to do.  This should be no more than about 40 characters, and
+     shouldn't include a newline character.
+
+     See the 'Viewing executing and queued items' section below.
+
 
 ==================
 POOL CONFIGURATION
@@ -172,3 +273,50 @@ The slow-work thread pool has a number of configurables:
      is bounded to between 1 and one fewer than the number of active threads.
      This ensures there is always at least one thread that can process very
      slow work items, and always at least one thread that won't.
+
+
+==================================
+VIEWING EXECUTING AND QUEUED ITEMS
+==================================
+
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
+
+        /sys/kernel/debug/slow_work/runqueue
+
+through which the list of work items being executed and the queues of items to
+be executed may be viewed.  The owner of a work item is given the chance to
+add some information of its own.
+
+The contents look something like the following:
+
+    THR PID   ITEM ADDR        FL MARK  DESC
+    === ===== ================ == ===== ==========
+      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
+      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
+      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
+      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
+      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
+      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
+      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
+      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
+    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
+    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
+    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
+    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
+    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
+    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
+    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
+    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
+    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
+    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
+    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
+    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
+    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
+    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
+
+In the 'THR' column, executing items show the thread they're occupying and
+queued threads indicate which queue they're on.  'PID' shows the process ID of
+a slow-work thread that's executing something.  'FL' shows the work item flags.
+'MARK' indicates how long since an item was queued or began executing.  Lastly,
+the 'DESC' column permits the owner of an item to give some information.
+
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 1c8eb4518ce0..fd9a2f67edf2 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -522,7 +522,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     pcm_devs       - Number of PCM devices assigned to each card
                      (default = 1, up to 4)
     pcm_substreams - Number of PCM substreams assigned to each PCM
-                     (default = 8, up to 16)
+                     (default = 8, up to 128)
     hrtimer        - Use hrtimer (=1, default) or system timer (=0)
     fake_buffer    - Fake buffer allocations (default = 1)
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index f1708b79f963..4c7f9aee5c4e 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
   laptop        laptop with HP jack sensing
   mobile        mobile devices with HP jack sensing
   thinkpad      Lenovo Thinkpad X300
+  touchsmart    HP Touchsmart
 
 AD1884
 ======
@@ -358,6 +359,7 @@ STAC9227/9228/9229/927x
   5stack-no-fp  D965 5stack without front panel
   dell-3stack   Dell Dimension E520
   dell-bios     Fixes with Dell BIOS setup
+  volknob       Fixes with volume-knob widget 0x24
   auto          BIOS setup (default)
 
 STAC92HD71B*
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 70d68ce8640a..a87dc277a5ca 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -1,5 +1,5 @@
 Generic Thermal Sysfs driver How To
-=========================
+===================================
 
 Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
 
@@ -10,20 +10,20 @@ Copyright (c)  2008 Intel Corporation
 
 0. Introduction
 
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
 
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
 
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
 
 [0-*]   denotes any positive number starting from 0
 [1-*]   denotes any positive number starting from 1
@@ -31,77 +31,77 @@ and throttle appropriate devices.
 1. thermal sysfs driver interface functions
 
 1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
-                                void *devdata, struct thermal_zone_device_ops *ops)
-
-        This interface function adds a new thermal zone device (sensor) to
-        /sys/class/thermal folder as thermal_zone[0-*].
-        It tries to bind all the thermal cooling devices registered at the same time.
-
-        name: the thermal zone name.
-        trips: the total number of trip points this thermal zone supports.
-        devdata: device private data
-        ops: thermal zone device call-backs.
-                .bind: bind the thermal zone device with a thermal cooling device.
-                .unbind: unbind the thermal zone device with a thermal cooling device.
-                .get_temp: get the current temperature of the thermal zone.
-                .get_mode: get the current mode (user/kernel) of the thermal zone.
-                           "kernel" means thermal management is done in kernel.
-                           "user" will prevent kernel thermal driver actions upon trip points
-                           so that user applications can take charge of thermal management.
-                .set_mode: set the mode (user/kernel) of the thermal zone.
-                .get_trip_type: get the type of certain trip point.
-                .get_trip_temp: get the temperature above which the certain trip point
-                                will be fired.
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+                int trips, void *devdata, struct thermal_zone_device_ops *ops)
+
+    This interface function adds a new thermal zone device (sensor) to
+    /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+    thermal cooling devices registered at the same time.
+
+    name: the thermal zone name.
+    trips: the total number of trip points this thermal zone supports.
+    devdata: device private data
+    ops: thermal zone device call-backs.
+        .bind: bind the thermal zone device with a thermal cooling device.
+        .unbind: unbind the thermal zone device with a thermal cooling device.
+        .get_temp: get the current temperature of the thermal zone.
+        .get_mode: get the current mode (user/kernel) of the thermal zone.
+            - "kernel" means thermal management is done in kernel.
+            - "user" will prevent kernel thermal driver actions upon trip points
+              so that user applications can take charge of thermal management.
+        .set_mode: set the mode (user/kernel) of the thermal zone.
+        .get_trip_type: get the type of certain trip point.
+        .get_trip_temp: get the temperature above which the certain trip point
+                        will be fired.
 
 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 
-        This interface function removes the thermal zone device.
-        It deletes the corresponding entry form /sys/class/thermal folder and unbind all
-        the thermal cooling devices it uses.
+    This interface function removes the thermal zone device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind all the thermal cooling devices it uses.
 
 1.2 thermal cooling device interface
 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
-                                        void *devdata, struct thermal_cooling_device_ops *)
-
-        This interface function adds a new thermal cooling device (fan/processor/...) to
-        /sys/class/thermal/ folder as cooling_device[0-*].
-        It tries to bind itself to all the thermal zone devices register at the same time.
-        name: the cooling device name.
-        devdata: device private data.
-        ops: thermal cooling devices call-backs.
-                .get_max_state: get the Maximum throttle state of the cooling device.
-                .get_cur_state: get the Current throttle state of the cooling device.
-                .set_cur_state: set the Current throttle state of the cooling device.
+                void *devdata, struct thermal_cooling_device_ops *)
+
+    This interface function adds a new thermal cooling device (fan/processor/...)
+    to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+    to all the thermal zone devices register at the same time.
+    name: the cooling device name.
+    devdata: device private data.
+    ops: thermal cooling devices call-backs.
+        .get_max_state: get the Maximum throttle state of the cooling device.
+        .get_cur_state: get the Current throttle state of the cooling device.
+        .set_cur_state: set the Current throttle state of the cooling device.
 
 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
-        This interface function remove the thermal cooling device.
-        It deletes the corresponding entry form /sys/class/thermal folder and unbind
-        itself from all the thermal zone devices using it.
+    This interface function remove the thermal cooling device.
+    It deletes the corresponding entry form /sys/class/thermal folder and
+    unbind itself from all the thermal zone devices using it.
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-                        int trip, struct thermal_cooling_device *cdev);
+                int trip, struct thermal_cooling_device *cdev);
 
-        This interface function bind a thermal cooling device to the certain trip point
-        of a thermal zone device.
-        This function is usually called in the thermal zone device .bind callback.
-        tz: the thermal zone device
-        cdev: thermal cooling device
-        trip: indicates which trip point the cooling devices is associated with
-                 in this thermal zone.
+    This interface function bind a thermal cooling device to the certain trip
+    point of a thermal zone device.
+    This function is usually called in the thermal zone device .bind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+          in this thermal zone.
 
 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
-                                int trip, struct thermal_cooling_device *cdev);
+                int trip, struct thermal_cooling_device *cdev);
 
-        This interface function unbind a thermal cooling device from the certain trip point
-        of a thermal zone device.
-        This function is usually called in the thermal zone device .unbind callback.
-        tz: the thermal zone device
-        cdev: thermal cooling device
-        trip: indicates which trip point the cooling devices is associated with
-                in this thermal zone.
+    This interface function unbind a thermal cooling device from the certain
+    trip point of a thermal zone device. This function is usually called in
+    the thermal zone device .unbind callback.
+    tz: the thermal zone device
+    cdev: thermal cooling device
+    trip: indicates which trip point the cooling devices is associated with
+          in this thermal zone.
 
 2. sysfs attributes structure
 
@@ -114,153 +114,166 @@ if hwmon is compiled in or built as a module.
 
 Thermal zone device sys I/F, created once it's registered:
 /sys/class/thermal/thermal_zone[0-*]:
-        |-----type:                     Type of the thermal zone
-        |-----temp:                     Current temperature
-        |-----mode:                     Working mode of the thermal zone
-        |-----trip_point_[0-*]_temp:    Trip point temperature
-        |-----trip_point_[0-*]_type:    Trip point type
+    |---type:                   Type of the thermal zone
+    |---temp:                   Current temperature
+    |---mode:                   Working mode of the thermal zone
+    |---trip_point_[0-*]_temp:  Trip point temperature
+    |---trip_point_[0-*]_type:  Trip point type
 
 Thermal cooling device sys I/F, created once it's registered:
 /sys/class/thermal/cooling_device[0-*]:
-        |-----type :                    Type of the cooling device(processor/fan/...)
-        |-----max_state:                Maximum cooling state of the cooling device
-        |-----cur_state:                Current cooling state of the cooling device
+    |---type:                   Type of the cooling device(processor/fan/...)
+    |---max_state:              Maximum cooling state of the cooling device
+    |---cur_state:              Current cooling state of the cooling device
 
 
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
 
-/sys/class/thermal/thermal_zone[0-*]
-        |-----cdev[0-*]:                The [0-*]th cooling device in the current thermal zone
-        |-----cdev[0-*]_trip_point:     Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+    |---cdev[0-*]:              [0-*]th cooling device in current thermal zone
+    |---cdev[0-*]_trip_point:   Trip point that cdev[0-*] is associated with
 
 Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
 /sys/class/hwmon/hwmon[0-*]:
-        |-----name:                     The type of the thermal zone devices.
-        |-----temp[1-*]_input:          The current temperature of thermal zone [1-*].
-        |-----temp[1-*]_critical:       The critical trip point of thermal zone [1-*].
+    |---name:                   The type of the thermal zone devices
+    |---temp[1-*]_input:        The current temperature of thermal zone [1-*]
+    |---temp[1-*]_critical:     The critical trip point of thermal zone [1-*]
+
 Please read Documentation/hwmon/sysfs-interface for additional information.
 
 ***************************
 * Thermal zone attributes *
 ***************************
 
-type                            Strings which represent the thermal zone type.
-                                This is given by thermal zone driver as part of registration.
-                                Eg: "acpitz" indicates it's an ACPI thermal device.
-                                In order to keep it consistent with hwmon sys attribute,
-                                this should be a short, lowercase string,
-                                not containing spaces nor dashes.
-                                RO
-                                Required
-
-temp                            Current temperature as reported by thermal zone (sensor)
-                                Unit: millidegree Celsius
-                                RO
-                                Required
-
-mode                            One of the predefined values in [kernel, user]
-                                This file gives information about the algorithm
-                                that is currently managing the thermal zone.
-                                It can be either default kernel based algorithm
-                                or user space application.
-                                RW
-                                Optional
-                                kernel  = Thermal management in kernel thermal zone driver.
-                                user    = Preventing kernel thermal zone driver actions upon
-                                          trip points so that user application can take full
-                                          charge of the thermal management.
-
-trip_point_[0-*]_temp           The temperature above which trip point will be fired
-                                Unit: millidegree Celsius
-                                RO
-                                Optional
-
-trip_point_[0-*]_type           Strings which indicate the type of the trip point
-                                E.g. it can be one of critical, hot, passive,
-                                    active[0-*] for ACPI thermal zone.
-                                RO
-                                Optional
-
-cdev[0-*]                       Sysfs link to the thermal cooling device node where the sys I/F
-                                for cooling device throttling control represents.
-                                RO
-                                Optional
-
-cdev[0-*]_trip_point            The trip point with which cdev[0-*] is associated in this thermal zone
-                                -1 means the cooling device is not associated with any trip point.
-                                RO
-                                Optional
-
-******************************
-* Cooling device  attributes *
-******************************
-
-type                            String which represents the type of device
-                                eg: For generic ACPI: this should be "Fan",
-                                "Processor" or "LCD"
-                                eg. For memory controller device on intel_menlow platform:
-                                this should be "Memory controller"
-                                RO
-                                Required
-
-max_state                       The maximum permissible cooling state of this cooling device.
-                                RO
-                                Required
-
-cur_state                       The current cooling state of this cooling device.
-                                the value can any integer numbers between 0 and max_state,
-                                cur_state == 0 means no cooling
-                                cur_state == max_state means the maximum cooling.
-                                RW
-                                Required
+type
+        Strings which represent the thermal zone type.
+        This is given by thermal zone driver as part of registration.
+        E.g: "acpitz" indicates it's an ACPI thermal device.
+        In order to keep it consistent with hwmon sys attribute; this should
+        be a short, lowercase string, not containing spaces nor dashes.
+        RO, Required
+
+temp
+        Current temperature as reported by thermal zone (sensor).
+        Unit: millidegree Celsius
+        RO, Required
+
+mode
+        One of the predefined values in [kernel, user].
+        This file gives information about the algorithm that is currently
+        managing the thermal zone. It can be either default kernel based
+        algorithm or user space application.
+        kernel  = Thermal management in kernel thermal zone driver.
+        user    = Preventing kernel thermal zone driver actions upon
+                  trip points so that user application can take full
+                  charge of the thermal management.
+        RW, Optional
+
+trip_point_[0-*]_temp
+        The temperature above which trip point will be fired.
+        Unit: millidegree Celsius
+        RO, Optional
+
+trip_point_[0-*]_type
+        Strings which indicate the type of the trip point.
+        E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+        thermal zone.
+        RO, Optional
+
+cdev[0-*]
+        Sysfs link to the thermal cooling device node where the sys I/F
+        for cooling device throttling control represents.
+        RO, Optional
+
+cdev[0-*]_trip_point
+        The trip point with which cdev[0-*] is associated in this thermal
+        zone; -1 means the cooling device is not associated with any trip
+        point.
+        RO, Optional
+
+passive
+        Attribute is only present for zones in which the passive cooling
+        policy is not supported by native thermal driver. Default is zero
+        and can be set to a temperature (in millidegrees) to enable a
+        passive trip point for the zone. Activation is done by polling with
+        an interval of 1 second.
+        Unit: millidegrees Celsius
+        RW, Optional
+
+*****************************
+* Cooling device attributes *
+*****************************
+
+type
+        String which represents the type of device, e.g:
+        - for generic ACPI: should be "Fan", "Processor" or "LCD"
+        - for memory controller device on intel_menlow platform:
+          should be "Memory controller".
+        RO, Required
+
+max_state
+        The maximum permissible cooling state of this cooling device.
+        RO, Required
+
+cur_state
+        The current cooling state of this cooling device.
+        The value can any integer numbers between 0 and max_state:
+        - cur_state == 0 means no cooling
+        - cur_state == max_state means the maximum cooling.
+        RW, Required
 
 3. A simple implementation
 
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
 
 /sys/class/thermal:
 
 |thermal_zone1:
-        |-----type:                     acpitz
-        |-----temp:                     37000
-        |-----mode:                     kernel
-        |-----trip_point_0_temp:        100000
-        |-----trip_point_0_type:        critical
-        |-----trip_point_1_temp:        80000
-        |-----trip_point_1_type:        passive
-        |-----trip_point_2_temp:        70000
-        |-----trip_point_2_type:        active0
-        |-----trip_point_3_temp:        60000
-        |-----trip_point_3_type:        active1
-        |-----cdev0:                    --->/sys/class/thermal/cooling_device0
-        |-----cdev0_trip_point:         1       /* cdev0 can be used for passive */
-        |-----cdev1:                    --->/sys/class/thermal/cooling_device3
-        |-----cdev1_trip_point:         2       /* cdev1 can be used for active[0]*/
+    |---type:                   acpitz
+    |---temp:                   37000
+    |---mode:                   kernel
+    |---trip_point_0_temp:      100000
+    |---trip_point_0_type:      critical
+    |---trip_point_1_temp:      80000
+    |---trip_point_1_type:      passive
+    |---trip_point_2_temp:      70000
+    |---trip_point_2_type:      active0
+    |---trip_point_3_temp:      60000
+    |---trip_point_3_type:      active1
+    |---cdev0:                  --->/sys/class/thermal/cooling_device0
+    |---cdev0_trip_point:       1       /* cdev0 can be used for passive */
+    |---cdev1:                  --->/sys/class/thermal/cooling_device3
+    |---cdev1_trip_point:       2       /* cdev1 can be used for active[0]*/
 
 |cooling_device0:
-        |-----type:                     Processor
-        |-----max_state:                8
-        |-----cur_state:                0
+    |---type:                   Processor
+    |---max_state:              8
+    |---cur_state:              0
 
 |cooling_device3:
-        |-----type:                     Fan
-        |-----max_state:                2
-        |-----cur_state:                0
+    |---type:                   Fan
+    |---max_state:              2
+    |---cur_state:              0
 
 /sys/class/hwmon:
 
 |hwmon0:
-        |-----name:                     acpitz
-        |-----temp1_input:              37000
-        |-----temp1_crit:               100000
+    |---name:                   acpitz
+    |---temp1_input:            37000
+    |---temp1_crit:             100000
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 957b22fde2df..8179692fbb90 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -1231,6 +1231,7 @@ something like this simple program:
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <unistd.h>
+#include <string.h>
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
@@ -1265,6 +1266,7 @@ const char *find_debugfs(void)
                return NULL;
        }
 
+       strcat(debugfs, "/tracing/");
        debugfs_found = 1;
 
        return debugfs;
diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt
new file mode 100644
index 000000000000..3ffadf8da61f
--- /dev/null
+++ b/Documentation/vm/hwpoison.txt
@@ -0,0 +1,136 @@
+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+        All memory failures cause a panic. Do not attempt recovery.
+        (on x86 this can be also affected by the tolerant level of the
+        MCE subsystem)
+
+early kill
+        (can be controlled globally and per process)
+        Send SIGBUS to the application as soon as the error is detected
+        This allows applications who can process memory errors in a gentle
+        way (e.g. drop affected object)
+        This is the mode used by KVM qemu.
+
+late kill
+        Send SIGBUS when the application runs into the corrupted page.
+        This is best for memory error unaware applications and default
+        Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+        See sysctl.txt
+
+vm.memory_failure_early_kill
+        Enable early kill mode globally
+
+PR_MCE_KILL
+        Set early/late kill mode/revert to system default
+        arg1: PR_MCE_KILL_CLEAR: Revert to system default
+        arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+                PR_MCE_KILL_EARLY: Early kill
+                PR_MCE_KILL_LATE:  Late kill
+                PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+        return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+        (as root)
+        Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+        /sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+        Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+        Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+        x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+
diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt
index 72a22f65960e..262d8e6793a3 100644
--- a/Documentation/vm/ksm.txt
+++ b/Documentation/vm/ksm.txt
@@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
 max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
+                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
                    Value 0 imposes no limit on the kernel pages KSM may use;
                    but note that any process using MADV_MERGEABLE can cause
                    KSM to allocate these pages, unswappable until it exits.
-                   Default: 2000 (chosen for demonstration purposes)
+                   Default: quarter of memory (chosen to not pin too much)
 
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
-                   e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
-                   Default: 200 (chosen for demonstration purposes)
+                   e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
+                   Default: 100 (chosen for demonstration purposes)
 
 sleep_millisecs  - how many milliseconds ksmd should sleep before next scan
                    e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
@@ -70,7 +70,8 @@ run              - set 0 to stop ksmd from running but keep merged pages,
                    set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
                    set 2 to stop ksmd and unmerge all pages currently merged,
                          but leave mergeable areas registered for next run
-                   Default: 1 (for immediate use by apps which register)
+                   Default: 0 (must be changed to 1 to activate KSM,
+                               except if CONFIG_SYSFS is disabled)
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
@@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 30 July 2009
+Hugh Dickins, 24 Sept 2009
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index fa1a30d9e9d5..4793c6aac733 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -2,7 +2,10 @@
  * page-types: Tool for querying page flags
  *
  * Copyright (C) 2009 Intel corporation
- * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Authors: Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Released under the General Public License (GPL).
  */
 
 #define _LARGEFILE64_SOURCE
@@ -69,7 +72,9 @@
 #define KPF_COMPOUND_TAIL       16
 #define KPF_HUGE                17
 #define KPF_UNEVICTABLE         18
+#define KPF_HWPOISON            19
 #define KPF_NOPAGE              20
+#define KPF_KSM                 21
 
 /* [32-] kernel hacking assistances */
 #define KPF_RESERVED            32
@@ -116,7 +121,9 @@ static char *page_flag_names[] = {
         [KPF_COMPOUND_TAIL]     = "T:compound_tail",
         [KPF_HUGE]              = "G:huge",
         [KPF_UNEVICTABLE]       = "u:unevictable",
+        [KPF_HWPOISON]          = "X:hwpoison",
         [KPF_NOPAGE]            = "n:nopage",
+        [KPF_KSM]               = "x:ksm",
 
         [KPF_RESERVED]          = "r:reserved",
         [KPF_MLOCKED]           = "m:mlocked",
@@ -152,9 +159,6 @@ static unsigned long	opt_size[MAX_ADDR_RANGES];
 static int              nr_vmas;
 static unsigned long    pg_start[MAX_VMAS];
 static unsigned long    pg_end[MAX_VMAS];
-static unsigned long    voffset;
-
-static int              pagemap_fd;
 
 #define MAX_BIT_FILTERS 64
 static int              nr_bit_filters;
@@ -163,9 +167,16 @@ static uint64_t		opt_bits[MAX_BIT_FILTERS];
 
 static int              page_size;
 
-#define PAGES_BATCH     (64 << 10)      /* 64k pages */
+static int              pagemap_fd;
 static int              kpageflags_fd;
 
+static int              opt_hwpoison;
+static int              opt_unpoison;
+
+static char             *hwpoison_debug_fs = "/debug/hwpoison";
+static int              hwpoison_inject_fd;
+static int              hwpoison_forget_fd;
+
 #define HASH_SHIFT      13
 #define HASH_SIZE       (1 << HASH_SHIFT)
 #define HASH_MASK       (HASH_SIZE - 1)
@@ -207,6 +218,74 @@ static void fatal(const char *x, ...)
         exit(EXIT_FAILURE);
 }
 
+static int checked_open(const char *pathname, int flags)
+{
+        int fd = open(pathname, flags);
+
+        if (fd < 0) {
+                perror(pathname);
+                exit(EXIT_FAILURE);
+        }
+
+        return fd;
+}
+
+/*
+ * pagemap/kpageflags routines
+ */
+
+static unsigned long do_u64_read(int fd, char *name,
+                                 uint64_t *buf,
+                                 unsigned long index,
+                                 unsigned long count)
+{
+        long bytes;
+
+        if (index > ULONG_MAX / 8)
+                fatal("index overflow: %lu\n", index);
+
+        if (lseek(fd, index * 8, SEEK_SET) < 0) {
+                perror(name);
+                exit(EXIT_FAILURE);
+        }
+
+        bytes = read(fd, buf, count * 8);
+        if (bytes < 0) {
+                perror(name);
+                exit(EXIT_FAILURE);
+        }
+        if (bytes % 8)
+                fatal("partial read: %lu bytes\n", bytes);
+
+        return bytes / 8;
+}
+
+static unsigned long kpageflags_read(uint64_t *buf,
+                                     unsigned long index,
+                                     unsigned long pages)
+{
+        return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
+}
+
+static unsigned long pagemap_read(uint64_t *buf,
+                                  unsigned long index,
+                                  unsigned long pages)
+{
+        return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
+}
+
+static unsigned long pagemap_pfn(uint64_t val)
+{
+        unsigned long pfn;
+
+        if (val & PM_PRESENT)
+                pfn = PM_PFRAME(val);
+        else
+                pfn = 0;
+
+        return pfn;
+}
+
 
 /*
  * page flag names
@@ -255,7 +334,8 @@ static char *page_flag_longname(uint64_t flags)
  * page list and summary
  */
 
-static void show_page_range(unsigned long offset, uint64_t flags)
+static void show_page_range(unsigned long voffset,
+                            unsigned long offset, uint64_t flags)
 {
         static uint64_t      flags0;
         static unsigned long voff;
@@ -281,7 +361,8 @@ static void show_page_range(unsigned long offset, uint64_t flags)
         count  = 1;
 }
 
-static void show_page(unsigned long offset, uint64_t flags)
+static void show_page(unsigned long voffset,
+                      unsigned long offset, uint64_t flags)
 {
         if (opt_pid)
                 printf("%lx\t", voffset);
@@ -362,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags)
         return flags;
 }
 
+static uint64_t kpageflags_flags(uint64_t flags)
+{
+        flags = expand_overloaded_flags(flags);
+
+        if (!opt_raw)
+                flags = well_known_flags(flags);
+
+        return flags;
+}
+
+/*
+ * page actions
+ */
+
+static void prepare_hwpoison_fd(void)
+{
+        char buf[100];
+
+        if (opt_hwpoison && !hwpoison_inject_fd) {
+                sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
+                hwpoison_inject_fd = checked_open(buf, O_WRONLY);
+        }
+
+        if (opt_unpoison && !hwpoison_forget_fd) {
+                sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+                hwpoison_forget_fd = checked_open(buf, O_WRONLY);
+        }
+}
+
+static int hwpoison_page(unsigned long offset)
+{
+        char buf[100];
+        int len;
+
+        len = sprintf(buf, "0x%lx\n", offset);
+        len = write(hwpoison_inject_fd, buf, len);
+        if (len < 0) {
+                perror("hwpoison inject");
+                return len;
+        }
+        return 0;
+}
+
+static int unpoison_page(unsigned long offset)
+{
+        char buf[100];
+        int len;
+
+        len = sprintf(buf, "0x%lx\n", offset);
+        len = write(hwpoison_forget_fd, buf, len);
+        if (len < 0) {
+                perror("hwpoison forget");
+                return len;
+        }
+        return 0;
+}
 
 /*
  * page frame walker
@@ -394,104 +531,83 @@ static int hash_slot(uint64_t flags)
         exit(EXIT_FAILURE);
 }
 
-static void add_page(unsigned long offset, uint64_t flags)
+static void add_page(unsigned long voffset,
+                     unsigned long offset, uint64_t flags)
 {
-        flags = expand_overloaded_flags(flags);
-
-        if (!opt_raw)
-                flags = well_known_flags(flags);
+        flags = kpageflags_flags(flags);
 
         if (!bit_mask_ok(flags))
                 return;
 
+        if (opt_hwpoison)
+                hwpoison_page(offset);
+        if (opt_unpoison)
+                unpoison_page(offset);
+
         if (opt_list == 1)
-                show_page_range(offset, flags);
+                show_page_range(voffset, offset, flags);
         else if (opt_list == 2)
-                show_page(offset, flags);
+                show_page(voffset, offset, flags);
 
         nr_pages[hash_slot(flags)]++;
         total_pages++;
 }
 
-static void walk_pfn(unsigned long index, unsigned long count)
+#define KPAGEFLAGS_BATCH        (64 << 10)      /* 64k pages */
+static void walk_pfn(unsigned long voffset,
+                     unsigned long index,
+                     unsigned long count)
 {
+        uint64_t buf[KPAGEFLAGS_BATCH];
         unsigned long batch;
-        unsigned long n;
+        unsigned long pages;
         unsigned long i;
 
-        if (index > ULONG_MAX / KPF_BYTES)
-                fatal("index overflow: %lu\n", index);
-
-        lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
-
         while (count) {
-                uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
-
-                batch = min_t(unsigned long, count, PAGES_BATCH);
-                n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
-                if (n == 0)
+                batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
+                pages = kpageflags_read(buf, index, batch);
+                if (pages == 0)
                         break;
-                if (n < 0) {
-                        perror(PROC_KPAGEFLAGS);
-                        exit(EXIT_FAILURE);
-                }
 
-                if (n % KPF_BYTES != 0)
-                        fatal("partial read: %lu bytes\n", n);
-                n = n / KPF_BYTES;
+                for (i = 0; i < pages; i++)
+                        add_page(voffset + i, index + i, buf[i]);
 
-                for (i = 0; i < n; i++)
-                        add_page(index + i, kpageflags_buf[i]);
-
-                index += batch;
-                count -= batch;
+                index += pages;
+                count -= pages;
         }
 }
 
-
-#define PAGEMAP_BATCH   4096
-static unsigned long task_pfn(unsigned long pgoff)
+#define PAGEMAP_BATCH   (64 << 10)
+static void walk_vma(unsigned long index, unsigned long count)
 {
-        static uint64_t buf[PAGEMAP_BATCH];
-        static unsigned long start;
-        static long count;
-        uint64_t pfn;
+        uint64_t buf[PAGEMAP_BATCH];
+        unsigned long batch;
+        unsigned long pages;
+        unsigned long pfn;
+        unsigned long i;
 
-        if (pgoff < start || pgoff >= start + count) {
-                if (lseek64(pagemap_fd,
-                            (uint64_t)pgoff * PM_ENTRY_BYTES,
-                            SEEK_SET) < 0) {
-                        perror("pagemap seek");
-                        exit(EXIT_FAILURE);
-                }
-                count = read(pagemap_fd, buf, sizeof(buf));
-                if (count == 0)
-                        return 0;
-                if (count < 0) {
-                        perror("pagemap read");
-                        exit(EXIT_FAILURE);
-                }
-                if (count % PM_ENTRY_BYTES) {
-                        fatal("pagemap read not aligned.\n");
-                        exit(EXIT_FAILURE);
-                }
-                count /= PM_ENTRY_BYTES;
-                start = pgoff;
-        }
+        while (count) {
+                batch = min_t(unsigned long, count, PAGEMAP_BATCH);
+                pages = pagemap_read(buf, index, batch);
+                if (pages == 0)
+                        break;
 
-        pfn = buf[pgoff - start];
-        if (pfn & PM_PRESENT)
-                pfn = PM_PFRAME(pfn);
-        else
-                pfn = 0;
+                for (i = 0; i < pages; i++) {
+                        pfn = pagemap_pfn(buf[i]);
+                        if (pfn)
+                                walk_pfn(index + i, pfn, 1);
+                }
 
-        return pfn;
+                index += pages;
+                count -= pages;
+        }
 }
 
 static void walk_task(unsigned long index, unsigned long count)
 {
-        int i = 0;
         const unsigned long end = index + count;
+        unsigned long start;
+        int i = 0;
 
         while (index < end) {
 
@@ -501,15 +617,11 @@ static void walk_task(unsigned long index, unsigned long count)
                 if (pg_start[i] >= end)
                         return;
 
-                voffset = max_t(unsigned long, pg_start[i], index);
-                index   = min_t(unsigned long, pg_end[i], end);
+                start = max_t(unsigned long, pg_start[i], index);
+                index = min_t(unsigned long, pg_end[i], end);
 
-                assert(voffset < index);
-                for (; voffset < index; voffset++) {
-                        unsigned long pfn = task_pfn(voffset);
-                        if (pfn)
-                                walk_pfn(pfn, 1);
-                }
+                assert(start < index);
+                walk_vma(start, index - start);
         }
 }
 
@@ -527,18 +639,14 @@ static void walk_addr_ranges(void)
 {
         int i;
 
-        kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
-        if (kpageflags_fd < 0) {
-                perror(PROC_KPAGEFLAGS);
-                exit(EXIT_FAILURE);
-        }
+        kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
 
         if (!nr_addr_ranges)
                 add_addr_range(0, ULONG_MAX);
 
         for (i = 0; i < nr_addr_ranges; i++)
                 if (!opt_pid)
-                        walk_pfn(opt_offset[i], opt_size[i]);
+                        walk_pfn(0, opt_offset[i], opt_size[i]);
                 else
                         walk_task(opt_offset[i], opt_size[i]);
 
@@ -575,6 +683,8 @@ static void usage(void)
 "            -l|--list                 Show page details in ranges\n"
 "            -L|--list-each            Show page details one by one\n"
 "            -N|--no-summary           Don't show summay info\n"
+"            -X|--hwpoison             hwpoison pages\n"
+"            -x|--unpoison             unpoison pages\n"
 "            -h|--help                 Show this usage message\n"
 "addr-spec:\n"
 "            N                         one page at offset N (unit: pages)\n"
@@ -624,11 +734,7 @@ static void parse_pid(const char *str)
         opt_pid = parse_number(str);
 
         sprintf(buf, "/proc/%d/pagemap", opt_pid);
-        pagemap_fd = open(buf, O_RDONLY);
-        if (pagemap_fd < 0) {
-                perror(buf);
-                exit(EXIT_FAILURE);
-        }
+        pagemap_fd = checked_open(buf, O_RDONLY);
 
         sprintf(buf, "/proc/%d/maps", opt_pid);
         file = fopen(buf, "r");
@@ -788,6 +894,8 @@ static struct option opts[] = {
         { "list"      , 0, NULL, 'l' },
         { "list-each" , 0, NULL, 'L' },
         { "no-summary", 0, NULL, 'N' },
+        { "hwpoison"  , 0, NULL, 'X' },
+        { "unpoison"  , 0, NULL, 'x' },
         { "help"      , 0, NULL, 'h' },
         { NULL        , 0, NULL, 0 }
 };
@@ -799,7 +907,7 @@ int main(int argc, char *argv[])
         page_size = getpagesize();
 
         while ((c = getopt_long(argc, argv,
-                                "rp:f:a:b:lLNh", opts, NULL)) != -1) {
+                                "rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
                 switch (c) {
                 case 'r':
                         opt_raw = 1;
@@ -825,6 +933,14 @@ int main(int argc, char *argv[])
                 case 'N':
                         opt_no_summary = 1;
                         break;
+                case 'X':
+                        opt_hwpoison = 1;
+                        prepare_hwpoison_fd();
+                        break;
+                case 'x':
+                        opt_unpoison = 1;
+                        prepare_hwpoison_fd();
+                        break;
                 case 'h':
                         usage();
                         exit(0);
@@ -844,7 +960,7 @@ int main(int argc, char *argv[])
         walk_addr_ranges();
 
         if (opt_list == 1)
-                show_page_range(0, 0);  /* drain the buffer */
+                show_page_range(0, 0, 0);  /* drain the buffer */
 
         if (opt_no_summary)
                 return 0;
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
index 600a304a828c..df09b9650a81 100644
--- a/Documentation/vm/pagemap.txt
+++ b/Documentation/vm/pagemap.txt
@@ -57,7 +57,9 @@ There are three components to pagemap:
     16. COMPOUND_TAIL
     16. HUGE
     18. UNEVICTABLE
+    19. HWPOISON
     20. NOPAGE
+    21. KSM
 
 Short descriptions to the page flags:
 
@@ -86,9 +88,15 @@ Short descriptions to the page flags:
 17. HUGE
     this is an integral part of a HugeTLB page
 
+19. HWPOISON
+    hardware detected memory corruption on this page: don't touch the data!
+
 20. NOPAGE
     no page frame exists at the requested address
 
+21. KSM
+    identical memory pages dynamically shared between one or more processes
+
     [IO related page flags]
  1. ERROR     IO error occurred
  3. UPTODATE  page has up-to-date data
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 9210d6fa5024..299b91c7609f 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -24,8 +24,8 @@ General Remarks
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device