1 files changed, 23 insertions, 10 deletions

diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index aff680784222..a45044e82662 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -18,6 +18,12 @@ Supported chips:
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Publicly available at the ITE website
                http://www.ite.com.tw/product_info/file/pc/IT8716F_V0.3.ZIP
+  * IT8718F
+    Prefix: 'it8718'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Publicly available at the ITE website
+               http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip
+               http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -48,8 +54,8 @@ Module Parameters
 Description
 -----------
 
-This driver implements support for the IT8705F, IT8712F, IT8716F and
-SiS950 chips.
+This driver implements support for the IT8705F, IT8712F, IT8716F,
+IT8718F and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -62,14 +68,21 @@ the IT8716F and late IT8712F have 6. They are shared with other functions
 though, so the functionality may not be available on a given system.
 The driver dumbly assume it is there.
 
-The IT8716F and later IT8712F revisions have support for 2 additional
-fans. They are not yet supported by the driver.
+The IT8718F also features VID inputs (up to 8 pins) but the value is
+stored in the Super-I/O configuration space. Due to technical limitations,
+this value can currently only be read once at initialization time, so
+the driver won't notice and report changes in the VID value. The two
+upper VID bits share their pins with voltage inputs (in5 and in6) so you
+can't have both on a given board.
+
+The IT8716F, IT8718F and later IT8712F revisions have support for
+2 additional fans. They are not yet supported by the driver.
 
-The IT8716F and late IT8712F and IT8705F also have optional 16-bit
-tachometer counters for fans 1 to 3. This is better (no more fan
+The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
+16-bit tachometer counters for fans 1 to 3. This is better (no more fan
 clock divider mess) but not compatible with the older chips and
 revisions. For now, the driver only uses the 16-bit mode on the
-IT8716F.
+IT8716F and IT8718F.
 
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
@@ -89,9 +102,9 @@ zero'; this is important for negative voltage measurements. All voltage
 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
 0.016 volt. The battery voltage in8 does not have limit registers.
 
-The VID lines (IT8712F/IT8716F) encode the core voltage value: the voltage
-level your processor should work with. This is hardcoded by the mainboard
-and/or processor itself. It is a value in volts.
+The VID lines (IT8712F/IT8716F/IT8718F) encode the core voltage value:
+the voltage level your processor should work with. This is hardcoded by
+the mainboard and/or processor itself. It is a value in volts.
 
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may already