5 files changed, 25 insertions, 18 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index bfcbbf88c44d..2075bbb8b3e2 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -227,6 +227,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-asihpi
+  -----------------
+
+    Module for AudioScience ASI soundcards
+
+    enable_hpi_hwdep    - enable HPI hwdep for AudioScience soundcard
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-atiixp
   -----------------
 
@@ -622,28 +632,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     
     The power-management is supported.
 
-  Module snd-es968
-  ----------------
-
-    Module for sound cards based on ESS ES968 chip (PnP only).
-
-    This module supports multiple cards, PnP and autoprobe.
-    
-    The power-management is supported.
-
   Module snd-es1688
   -----------------
 
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
-    port        - port # for ES-1688 chip (0x220,0x240,0x260)
-    fm_port     - port # for OPL3 (option; share the same port as default)
+    isapnp      - ISA PnP detection - 0 = disable, 1 = enable (default)
     mpu_port    - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
-    irq         - IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq     - IRQ # for MPU-401 port (5,7,9,10)
+    fm_port     - port # for OPL3 (option; share the same port as default)
+
+    with isapnp=0, the following additional options are available:
+    port        - port # for ES-1688 chip (0x220,0x240,0x260)
+    irq         - IRQ # for ES-1688 chip (5,7,9,10)
     dma8        - DMA # for ES-1688 chip (0,1,3)
 
-    This module supports multiple cards and autoprobe (without MPU-401 port).
+    This module supports multiple cards and autoprobe (without MPU-401 port)
+    and PnP with the ES968 chip.
 
   Module snd-es18xx
   -----------------
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 98d14cb8a85d..bdafdbd32561 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -204,7 +204,6 @@ generic parser regardless of the codec.  Usually the codec-specific
 parser is much better than the generic parser (as now).  Thus this
 option is more about the debugging purpose.
 
-
 Speaker and Headphone Output
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 One of the most frequent (and obvious) bugs with HD-audio is the
@@ -600,6 +599,9 @@ probing, the proc file is available, so you can get the raw codec
 information before modified by the driver.  Of course, the driver
 isn't usable with `probe_only=1`.  But you can continue the
 configuration via hwdep sysfs file if hda-reconfig option is enabled.
+Using `probe_only` mask 2 skips the reset of HDA codecs (use
+`probe_only=3` as module option). The hwdep interface can be used
+to determine the BIOS codec initialization.
 
 
 hda-verb
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 9ac842be9b4f..05bf5a0eee41 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -188,8 +188,8 @@ The WM8731 output mixer has 3 inputs (sources)
  3. Mic Sidetone Input
 
 Each input in this example has a kcontrol associated with it (defined in example
-above) and is connected to the output mixer via it's kcontrol name. We can now
-connect the destination widget (wrt audio signal) with it's source widgets.
+above) and is connected to the output mixer via its kcontrol name. We can now
+connect the destination widget (wrt audio signal) with its source widgets.
 
         /* output mixer */
         {"Output Mixer", "Line Bypass Switch", "Line Input"},
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index bab7711ce963..2524c75557df 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -67,7 +67,7 @@ static struct snd_soc_dai_link corgi_dai = {
         .ops = &corgi_ops,
 };
 
-struct snd_soc_card then sets up the machine with it's DAIs. e.g.
+struct snd_soc_card then sets up the machine with its DAIs. e.g.
 
 /* corgi audio machine driver */
 static struct snd_soc_card snd_soc_corgi = {
diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt
index 1e4c6d3655f2..138ac88c1461 100644
--- a/Documentation/sound/alsa/soc/overview.txt
+++ b/Documentation/sound/alsa/soc/overview.txt
@@ -33,7 +33,7 @@ features :-
     and machines.
 
   * Easy I2S/PCM audio interface setup between codec and SoC. Each SoC
-    interface and codec registers it's audio interface capabilities with the
+    interface and codec registers its audio interface capabilities with the
     core and are subsequently matched and configured when the application
     hardware parameters are known.