1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3c1eddd9fcc7..b9b7f30ab500 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
    or the value stored in the card's EEPROM for cards that have an EEPROM and
    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
    If dma2 is specified and different from dma1, the card will operate in
    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
    or the value stored in the card's EEPROM for cards that have an EEPROM and
    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
-    be choosen freely from the options enumerated above.
+    be chosen freely from the options enumerated above.
    If dma2 is specified and different from dma1, the card will operate in
    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 3c1eddd9fcc7..b9b7f30ab500 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -322,7 +322,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
322	"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)	322	"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
323	or the value stored in the card's EEPROM for cards that have an EEPROM and	323	or the value stored in the card's EEPROM for cards that have an EEPROM and
324	their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can	324	their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
325	be choosen freely from the options enumerated above.	325	be chosen freely from the options enumerated above.
326		326
327	If dma2 is specified and different from dma1, the card will operate in	327	If dma2 is specified and different from dma1, the card will operate in
328	full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to	328	full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
@@ -356,7 +356,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
356	"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)	356	"port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
357	or the value stored in the card's EEPROM for cards that have an EEPROM and	357	or the value stored in the card's EEPROM for cards that have an EEPROM and
358	their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can	358	their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
359	be choosen freely from the options enumerated above.	359	be chosen freely from the options enumerated above.
360		360
361	If dma2 is specified and different from dma1, the card will operate in	361	If dma2 is specified and different from dma1, the card will operate in
362	full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to	362	full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to